User manual

53
ENGLISH
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)
Setting up the projector
Setting up the projector
Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Screen setting] or [Setting] and then set up each set-
ting.
Item Description
Screen ..................... Switches the screen mode. (Normal, Full,
Wide(16:9), Zoom, True, Natural wide, Custom)
There may not be available mode depending on
the input source and the setting of Screen aspect
as shown in the table below.
Ceiling ..................... Sets the image top/bottom and left/right
reversed. (ON, OFF)
Rear ........................... Sets the image left/right reversed. (ON, OFF)
Screen aspect .... Sets the aspect. {Default(16:10), 16:9, 4:3}
Reset ........................ Resets the Screen settings.
Screen Aspect Default(16:10) 16:9 4:3
Input source Input source Input source
Screen mode Video Computer Video Computer Video Computer
Normal      
Full      
Wide(16:9)   *1 *1  
Zoom      
True *1  *1  *1 
Natural wide *2 *1 *2 *1 *1 *1
Custom     
 The mark "" means that the available screen mode in the selected input source system.
*1 The error message appears when selecting the disabled screen mode indicated with "*1".
*2 Natural wide cannot be selected when 720p, 1035i, 1080i or 1080p is selected in AV system menu.
Downloaded From projector-manual.com Christie Manuals