User manual

55
ENGLISH
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)
Setting up the projector
Item Description
Filter warning..... Sets the time to indicate the filter replacement
message on the screen. (OFF, 400H, 700H, 1000H)
Filter counter ....... Click Reset button to reset the filter use time of
the projector when you replace the filter cartridge
with new one or roll-up the filter.
Filter control .......... Indicates the number of remaining times for the
filter scroll.
To roll-up the filter, click
Roll-up button and then
SELECT button.
Click
Reset button to reset the scroll remaining
times when you replace the filter cartridge with
new one.
The default number of scrolls remaining times is 9.
Don't reset the Filter control when the filter car-
tridge is not replaced.
Item Description
Shutter .................... Sets the shutter operation. (ON: close, OFF: open)
Shutter
management ..... Sets the specified period of time when the pro-
jector shuts down after the projector is left with
the shutter closed.
* The specified time can be set 5 to 480 min.
Lamp control ...... Selects lamp control mode. (Auto, Normal, Eco1,
Eco2)
Lamp life
control .................... Selects lamp life control. (mode1, mode2)
Item Description
Remote control ..... Sets the remote control code. (Code 1 - Code 8)
Fan speed control
........ Sets the fan control speed. (Normal, Max)
status ...............Indicates the current fan mode.
Factory default .......... Sets all of the projector control items to the fac-
tory default setting except the following items.
Lamp Corres. Value, PJ time, PIN code, Filter used
time, Scrolls remaining times.
* This function is not effective for the settings
of the network unit (Network address settings,
e-mail settings, etc.)
Downloaded From projector-manual.com Christie Manuals