User manual

59
ENGLISH
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)
Timer setting
2. Set an execute time
Type the time with (Hour:Minute) and 24 hours format.
Ex.: Type [18:25] if you specify [PM 6 o’clock and 25 minutes].
3. Select an event action
Select an event action from the pull-down menu.
Event Action
ON ..................................Turns on the projector
OFF ................................Turns off the projector
Lamp Auto ...............Changes lamp mode to "Auto"
Lamp Normal .........Changes lamp mode to "Normal"
Lamp Eco1 ...............Changes lamp mode to "Eco1"
Lamp Eco2 ...............Changes lamp mode to "Eco2"
*Available events depend on the projector function.
4. Register an event
Click Set button to register the set timer event. Repeat steps 1 to 4 for another timer
event setting.
Change the event mode
On the event list appearing by clicking Check but-
ton, click on the event you want to delete, disable or
enable. Click Cancel, Delete, Timer ON or Timer OFF
button on the popup pallet.
Check the timer events
To check the set timer events, click Check button.
The timer events are listed. The event with blue back-
ground color represents the timer-OFF event.
Button Operation
Cancel......................Cancels the setting.
Delete ......................Deletes the timer event.
Timer OFF .............Disable the timer event temporarily.
Timer ON ...............Enable the timer event.
Downloaded From projector-manual.com Christie Manuals