User manual

75
ENGLISH
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)
Using the Real Time Capture
PC4 PC3 PC6
Capture
PC5
PC2
PJ2
PJ1
PC1
* PC provides the Network Capture.
Project a screen
image of PC1 with
PC2.
* Start capturing of
the PC1 from the
projector PJ2.
[3] Control by the projector
 The IP address of the connecting PC should be registered previously. ( p.72)
 If the error message appears, check item "Parameter set up". ( p.71)
 The projector does not provide the function to register the IP address of the computer and to set
the parameter of the capturing. They should be registered by using the web browser previously.
( p.71-72)
Set "On" when
using the wireless
mouse function
Select input mode of the projector to "Network" previously.
1. Select "Network Capture" in the Network menu and then press point button  or
SELECT button.
2. Select "PC number" and press SELECT button and using point buttons ! to Select
the PC number to connect, and then press SELECT button.
3. Select "Connect" and then press SELECT button to start capturing. The screen image
of the selected computer will appear on the projected screen in real time.
4. To end capturing, select "Disconnect" and then press SELECT button.
Downloaded From projector-manual.com Christie Manuals