User manual

84
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)
Chapter 5 Network Capture
Network Communication operation and change of state
Network Communication can be used under the environment which one or more com-
puters are connected to the projector via the network.
Preparation
Launch the Network Capture 3 software on the target computer. (
p.70) Set the projector
in the standby or turning on. Check IP address of the target computer is registered in the
connection list. (
p.78)
Operation on the Main PC Operation on the Sub PC
On the Communication
M Executing the command "Start Communication".
 The capture editing window appears on the
screen. The icon on the task bar is activated.
Frame
The icon on the task bar is activated to
let users know that the captured image is
now serving.
M Executing the command "Start Editing".
The capture image on the Main PC
appears on the screen.
Frame
R B
K Editing the capture image using with the tools.
 The editing information is automatically
transferred to the Sub PC.
R
 The editing information on the Main PC is
reflected on the Sub PC.
B
6 Releasing the editing authority.
 The color of authority status frame changes green.
G
The color of authority status frame chang-
es green.
G
 The color of authority status frame changes blue.
B
K Acquiring the authority.
The color of authority status frame chang-
es red.
R
 The editing information on the Sub PC is
reflected on the Main PC.
B
6 Editing the captured image using with the
tools.
The editing information is automatically
transferred to the target PC.
R
 The color of authority status frame changes green.
G
I Releasing the editing authority.
The color of authority status frame chang-
es green.
G
I Acquiring the authority.
 The color of authority status frame changes red.
R
The color of authority status frame chang-
es blue.
B
5 Repeat steps K, 6 if required.
5 Repeat steps K to I if required.
A Executing the command "Capture transfer".
 Updating the editing window with a new
captured screen image.
R
A new captured screen image appears on
the editing window.
B
@ Repeat steps K to 5.
 Ending the communication.
 The capture editing window disappears.
R
 The capture editing window disappears.
 The projector projects the edited captured image on the screen when the input mode of the pro-
jector is set "Network".
 The command "Save Communication" can be executed in any of the mode even if not having the
authority.
 The arrow () shows a response to the command executed.
 The execution of the command "End Communication" or "End Editing" on the Sub PC has no
effect on the other target computers.
Downloaded From projector-manual.com Christie Manuals