LX400 U S E R M A N U A L - O P E R AT I N G G U I D E (Concise) 020-000166-0
《ENGLISH》 NOTICE for European Union members This is a Class A product in European Union. WARNING : This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. AVIS pour les membres du Union Européenne 《FRANÇAIS》 Le présent appareil est un produit de classe A, dans Union Européenne. AVERTISSEMENT : Le présent appareil est un produit de classe A.
NOTIFICAÇÃO para sócios de União europeus Trata-se de um produto Classe A, em União européia. 《PORTUGUÊS》 AVISO : Trata-se de um produto Classe A. Num ambiente doméstico, este produto pode provocar interferências rádio, podendo ser necessário tomar medidas adequadas. 䗮ⶹ⌆㘨ⲳ៤ਬ 《Ё᭛》 ᴀѻકᰃ $ 㑻ѻક⌆㘨ⲳ (8 䄺ਞ ᴀѻકᰃ $ 㑻ѻકDŽᆊᒁ⦃๗Ёˈᴀѻકৃ㛑Ӯᇐ㟈᮴㒓⬉ᑆᡄˈ䖭⾡ᚙމϟˈ ⫼᠋䳔䞛প䗖ᔧⱘᮑDŽ 氦崃͑櫶穯͙͑ͶΆ͚͑儆沋͑箒毖櫖͑堆穢͑皻滆͑ 《穢剳檺》 決冉汆͑氦崃͑櫶穯͙͑ͶΆ͚͑櫖昢͑畺岞枪͑Ͳ͑洢禎沋城埪 .
Projector LX400 User Manual - Operating Guide (concise) Thank you for purchasing this projector. WARNING ►Before using this product, be sure to read all manuals for this product. See “Using the CD manual” ( 12) to read the manuals in the CD. After reading them, store them in a safe place for future reference. Contents Contents of package........................... 1 Arrangement ....................................... 2 Connecting your devices .................... 3 Connecting power supply .............
Arrangement Please arrange the projector and the screen. Install the projector in a stable, cool and airy place, keeping a space of 30 cm or more between the sides of the projector and other objects such as walls. Avoid the projector from a hot, humid, dusty, or smoky place. Refer to the illustrations and tables below to determine screen size and projection distance.
Connecting your devices Before connecting devices, please read the manuals for all the devices that you want to connect with this projector, to make sure that the connection is proper and prepare the connectors needed. And connect them properly according to the manuals.
Connecting power supply 1. Connect the connector of the power cord to the AC inlet of the projector. 2. Firmly plug the power cord's plug into the outlet. AC inlet Connector of the power cord to the outlet WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.
Adjusting the projector's elevator Use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 8 degrees. This projector has 2 elevator feet and 2 elevator knobs. An elevator foot is adjustable while pulling up the elevator knob on the same side as it. 1. To loose an elevator foot, pull up the elevator knob on the same side as it. 8° 2.
Remote control (continued) Putting batteries Please load the batteries before using the remote control. 1. Slide back and remove the battery cover. 2. Put the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) into the holder, according to the polarity markings (+) and (-) on the holder. 3. Put the battery cover back to its former state. WARNING ►Always handle the batteries with care and use them only as directed.
Displaying the picture INPUT button 1. Make sure that the signal source is sending the signal to the projector. 2. Press the VOLUME button on the remote control. Use the ▲/▼ cursor buttons to adjust the volume. 3. Press the INPUT button on the projector. Each time you press the button, the projector switches its input port in turn. 4. Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. 5.
Lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact your dealer and tell the lamp type number. Type number = 003-120457-01 (DT00873) Replacing the lamp 1. Turn the projector off, and unplug the power cord.
Lamp (continued) Lamp warning HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
Air filter Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. The air filter has two kinds of filters inside. Replace the filters when they are damaged or too soiled. To prepare the new filters, make contact with your dealer and tell the following type number. Type number = 003-002119-01 (MU05661) When you replace the lamp, please replace the air filter.
Internal clock battery Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has stopped, please replace the battery according to the following procedures. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the projector has cooled adequately, slowly turn over the projector, so that the bottom is facing. 3.
Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’ s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. Windows®: OS: Microsoft® Windows® 98, 98SE, Me, 2000/XP, Windows NT®4.0, or later CPU: Pentium® processor 133MHz / Memory: 32MB or more ® Macintosh : OS:Mac OS 10.
Regulatory notices About Electro-Magnetic Interference In Canada : This Class B digital apparatus complies with Canadian ICES-003. In the US and places where the FCC regulations are applicable Declaration of Conformity Trade name: CHRISTIE Model Number: LX400 Responsible Party: Christie Digital Systems USA, Inc. Address: 10550 Camden Drive, Cypress CA 90630 U.S.A. Telephone Number: +1-800-407-7727 This device complies with part 15 of the FCC Rules.
Specifications Item Product name Panel size Liquid Crystal Drive system Panel Pixels Lens Lamp Audio output Power supply Power consumption Temperature range 319 Ports Specifications Liquid crystal projector 2.0cm (0.79 type) TFT active matrix 786,432 pixels (1024 horizontal x 768 vertical) Zoom lens, F=1.7 ~ 1.9, f=24 ~ 29mm (approx.) 275W UHB 4W x4 AC 100-120V/5.0A, AC220-240V/2.1A 460W 5~35˚C (Operating) RGB1 .....................................................
Warranty and after-service If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, first refer to the “Troubleshooting” of the “Operating Guide” in the CD and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.
