User manual

Keyboard functions
On Screen Display
Serial commands
Technical information
A
B
C
D
Summary
The help command
Topics
Commands
Linking of units
.1
.2
.3
.4
.5
Serial commandsC
Using the PA-converter
copy rig ht C hri s tie 200 2.0 6
- 55 -
Commands
It does NOT save these settings into memory. If argument ! is given, the list of stored
sources will be checked first, and if found, it will recall the settings from there.
Command: OBL [L/R/B/{N}]
Function: Show black on Left/Right/Both/None of the outputs. Defaults to none.
Command: OSP [(+/-,+/-)/I]
Function: Set polarity of H and V output sync.
Default is the same as the input syncs. Parameter I copies input sync polarity.
Command: OSM (0-2/SYNCLO/SYNCHI/ASYNC)
Function: Sets the output scan mode.
At full rate the out signal will have the same vertical refresh rate as the output, with every
frame input twice.
0=Synclo:
The output rate will be within 43-85Hz. The unit will try to half the framerate to get the output
within this range.