User`s manual

Section 3: Working with PowerTool
PowerTool 2.0 User Manual 3-1
020-100035-02 Rev. 1 (03-2010)
3 Working with
PowerTool
PowerTool provides a quick and convenient way to control selected
projectors in a multi-projector array. PowerTool runs on PC or Tablet.
3.1 Starting the PowerTool Software
1. To start the software, click
Start>Programs>Christie>PowerTool>PowerTool.
Startup opens the Load Configuration File dialog.
Figure 3-1 Load Configuration File
• To create a new configuration file, click New Configuration, add
projectors, and save the configuration file.
• To open a configuration file when
starting the software, select
Load Configuration, browse and select the configuration to load.
NOTE: PowerTool automatically loads the projectors in the
configuration file into the projector workspace. Red (Status Unknown)
indicates projectors that are in an error condition, or projectors that are
not connected as recorded in the configuration file.