QuadHD84 User Manual 020-000671-01
NOTICES COPYRIGHT AND TRADEMARKS Copyright © 2013 Christie Digital Systems USA Inc. All rights reserved. All brand names and product names are trademarks, registered trademarks or trade names of their respective holders. REGULATORY The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a commercial environment.
Important Precautions Please read these safety precautions carefully before using the display. Warning Failure to follow those warnings may result in death, serious injury or damage to the display or other property. Electrical Power Related Precautions Warning n Use only the power cord supplied with the unit or another manufacturer’s authorized cord. - Failure to do so may result in fire or electrical shock or damage to the display. n Use only a properly grounded plug and receptacle.
Important Precautions Precautions in Installing the Display Warning n Keep away from heat sources like heaters or open flames. - Electrical shock, fire, malfunction or deformation may occur. n Keep the packing anti-moisture material or vinyl packing out of the reach of children. - Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Important Precautions Precautions in Moving the Display Warning n Make sure to turn off the display. - You may be electrocuted or the display can be damaged. n Make sure to remove all cables before moving the display. - You may be electrocuted or the display can be damaged. n Do not shock the display when moving it. - You may be electrocuted or the display can be damaged. n Make sure the display faces forward and hold it with both hands to move.
Important Precautions On Disposal (Only, Hg lamp used Display) n The fluorescent lamp used in this display contains a small amount of mercury. n Do not dispose of this display with general household waste. n Disposal of this display must be carried out in accordance to the regulations of your local authority.
Accessories Included Accessories Thank you for your purchase. Ensure that the following accessories are included with your display. If an accessory is missing, please contact the dealer where you purchased the display. v The accessories included may differ from the images shown below. Remote Control & Batteries (AAA × 2) Power Cord Quick Start Guide CD-ROM (User’s Manual) 5 QuadHD84 User Manual 020-000671-01 Rev.
Name and Function of the Parts * The image shown in the user’s guide could be different from the actual image. Front View 1 No. 2 Item Description 1 Power indicator Indicate power on or sleep mode status. - Power on: LED lights up. - Power off: LED off. 2 IR Receiver Receive incoming remote control commands. QuadHD84 User Manual 020-000671-01 Rev.
Name and Function of the Parts Rear View 1 2 12 3 4 QHD60 USB 1 13 INPUT MENU 2 VOL VOL 11 HDMI 1 RS-232 IN 1 2 No. RS-232 OUT 3 PC / MUSIC ETHERNET 4 RGB (PC) PC AUDIO IN 5 6 COMPONENT / VIDEO Y/V Pb/Cb Pr/Cr COMPONENT [GOOD] L AUDIO 7 AUDIO OUT R AUDIO DPTICAL OUT 8 Item Description 1 AC Power Input Connector Connect the power cord. 2 AC Switch Switch the power supply on/off. 3 RS-232C Serial Ports Connect several displays with serial port.
Name and Function of the Parts Rear View (continue) No. Item Description 9 Optical Audio Out Connect an audio amplifier. 10 HDMI Ports Connect an HDMI equipment or an HDMI-DVI adapter cable to devices such as a DVD player or set-top box. v HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals. 11 USB Ports Connect to a USB device such as a USB flash drive or USB hard disk drive.
Using the Remote Control Name of the Remote Control Buttons Power Turn the display on/off. OK • Enter the submenu. • Confirm the selection. Wide Change the display mode. Audio only Only output audio from the display speaker. Up • Move upward on the selection. • Change selected item. Menu Display OSD (on-screen display) menu. Right • Increase the values. • Enter the submenu. • Change the options. Exit Exit OSD menu. Multimedia Enter the multimedia mode. Input Switch the input source.
Mounting on a Wall VESA FDMI Wall Mounting This display supports a VESA FDMI compliant mounting interface. These mounts are purchased separately. Refer to the instructions included with the wall mount for more information. v The handles are designed for carrying.
Mounting on a Wall Installing the display on a wall 1.Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface. Make sure that the size of the cloth is larger than the display. 2.Gently lay the display on the cloth with the LCD screen facing down. 3.Identify the wall mounting screw holes on the back of the display as shown in the illustration. 600mm * Screw type :M8 400mm 4.
Connecting to External Devices Recommended Connection, Resolution & Picture Mode HDMI Connection, 3840 x 2160@30Hz, dynamic HDMI Connection (480p, 576p, 720p, 1080i, 1080p, UHD@24Hz/30Hz) HDMI supports ultra high definition (UHD) input, high definition input, and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals.
Connecting to External Devices HDMI-QHD60 Connection (3840 x 2160 @60Hz) Four HDMI ports form a UHD 60Hz. Each connection transmits 1080P @60Hz. HDMI signal cable 1 1 HDMI signal cable 2 Display 2 HDMI signal cable 3 3 HDMI signal cable 4 Computer/ Camcorder/ Multimedia player 4 UHD60 PC Connection Check that the computer, display, and the peripherals are turned off. Then, connect the signal input cable. A. Connecting with an HDMI Signal Input Cable HDMI Display B.
Connecting to External Devices Audio Out Connection Audio cable AUDIO OUT Display Speaker Optical audio cable DPTICAL Display Audio amplifier Component Connection VCR/DVD/Set-top Box Display Y/V Pb/Cb Pr/Cr COMPOSITE [GOOD] L AUDIO R Component AV cable Composite (Video) Connection VCR/DVD/Set-top Box Display Y/V Pb/Cb Pr/Cr COMPOSITE [GOOD] L AUDIO R Composite AV cable QuadHD84 User Manual 020-000671-01 Rev.
Connecting to External Devices USB Connection USB 1 USB Flash Drive 2 Display Ethernet Connection ETHERNET Ethernet (RJ-45) cable Network Display Power Connection Rear side of the display INPUT MENU VOL VOL Power outlet Power cord 15 QuadHD84 User Manual 020-000671-01 Rev.
Connecting to External Devices Installing OPS Module (Optional) Rear side of the display OPS Module INPUT MENU VOL VOL Note • Refer to the instructions included with the OPS Module for more information.
OSD Menus Screen Adjustment Options (using the Control Panel) INPUT 5 MENU VOL VOL INPUT 6 MENU 7 2 VOL 1 4 VOL 3 No. Item Description 1 Up Select menu item (move up). 2 Down Select menu item (move down). 3 Volume Up - Increase the volume level. - Adjust the settings (increase the value). 4 Volume Down - Decrease the volume level. - Adjust the settings (decrease the value). 5 Power Turn the display on/off. 6 Input Switch the input source.
OSD Menus Menu Options Menu Input Description Select the input source. Picture Adjust and refine the picture displayed on your display based on ambient room light and personal preferences. Audio Adjust the audio settings. Setup Adjust the general settings such as CEI setting, OSD language, and etc. Ethernet Wide Sleep Timer Note Configure the network settings. Select how the picture displays on the screen. Set the timer to turn the display off at the preset time.
OSD Menus Adjusting On-Screen Display (OSD) Settings Display OSD menu Select a main menu Enter the selected menu Select a menu item Enter the submenu Adjust the setting Confirm the setting Return to previous menu (*operation using the remote control) 1 Press the MENU button to display the OSD menu. 2 Use the p/q button to select the main menu. 3 Press the OK or u button to enter the selected menu screen. 4 Use the p/q button to select the menu item.
OSD Menus Input Menu Select the proper input source. Note • You can also access the Input menu by pressing the INPUT button on the remote control. • The available menu options varies depending on the input source. • If the menu items are appears in gray, this indicates that those functions are not available. QuadHD84 User Manual 020-000671-01 Rev.
OSD Menus Picture Menu Menu Option Description Picture Mode Select a preset view option optimized for different viewing conditions. • Custom: User can use the user-defined settings as they wish. • Cinema: This mode is normally used in movie. Soft image can be seen in this mode. The picture is somewhat darker than other mode. 21 QuadHD84 User Manual 020-000671-01 Rev.
OSD Menus Picture Menu (continue) Menu Option Description Picture Mode • Nature: This mode shows normal and natural image. • Sports: This mode uses high contrast display for clear-cut images ideal for viewing sports events. • Dynamic: This mode is normally used in department store, Backlight and Sharpness is set to its maximum value. Saturation of Color becomes high. You can see very bright, clear, and sharp image. • Game: This mode increases the brightness and response time level for enjoying video games.
OSD Menus Picture Menu (continue) Menu Option Description Size & Position Adjust the display settings. • Auto Adjust: Synchronize the display automatically. • Horiz. Position: Move the screen position horizontally. • Vertical Position: Move the screen position vertically. • Horizontal Size: Set the horizontal size of the screen. • Vertical Size: Set the vertical size of the screen. • Fine Tune: Adjust the focus of the display.
OSD Menus Picture Menu (continue) Menu Option Description Color Temperature Adjust the color settings. • Color Temperature: Select from the predetermined color temperatures. • Red Gain / Green Gain / Blue Gain: Adjust the red / green / blue gain settings to your preference. • Red Offset / Green Offset / Blue Offset: Adjust the red / green / blue offset settings to your preference. • Reset Color Temperature: Reset all Color Temperature settings to the factory default settings.
OSD Menus Picture Menu (continue) Menu Option Description Advanced Picture Set advanced Picture settings. • Dynamic Contrast: Adjust the brightness of the display to maximize the picture quality. • Local Dimming: Reduce the leakage and produce a darker picture. • MEMC: Reduce motion blur effect. • Noise Reduction: Reduce the noise level. • Digital NR: Reduce the noise level of digital signals. • Film Mode: Produce smoother motion picture when viewing movies from video players connected via HDMI.
OSD Menus Audio Menu Menu Option Description XinemaSound™ Enable/Disable the multi-dimensional surrounding sound function. 3D XinemaSound™ Enable/Disable the smooth and steady volume level function. Leveler Bass Adjust the bass level to your preference. Treble Adjust the treble level to your preference. Balance Adjust the sound balance between the left and right speakers. Lip Sync Adjust to match the movements and the lips of the person talking on the screen.
OSD Menus Audio Menu (continue) Menu Option Description Audio Only Output audio from the speakers but turn off the display. Digital Audio Out Select the type of digital audio output to an external audio system. Analog Audio Out Select the analog audio mode. Equalizer Settings Customize the equalizer settings. To adjust the settings, do the following: i. Press the t/u button to select the option and select OK to enter the submenu. ii. Press the p/q button to adjust the setting.
OSD Menus Setup Menu Menu Option Description CEI Settings Configure CEI settings. • CEI Function: Enable/Disable CEI function. • Device Search: Search for CEI devices. Note “Device Search” option is only available if CEI function is enabled. Menu Language Select the on-screen menu language. Power Indicator Enable or disable the power indicator on the front of the display when the display is turned on. QuadHD84 User Manual 020-000671-01 Rev.
OSD Menus Setup Menu (continue) Menu Option Description Wired Control Specify the type of network connection. Command Input Input source of Command Input via RS232 or OPS. Set ID Assign a unique Set ID NO (name assignment) to each display when several displays are connected (via RS-232C) for display. Enter the ID number and select Set to confirm the setting. System Information Display the system information of the display. Select System Information to view the system information.
OSD Menus Setup Menu (continue) Menu Option Description Reset All Settings Return the display parameters on all menus to the factory default settings. Select OK to reset all settings. QuadHD84 User Manual 020-000671-01 Rev.
OSD Menus Ethernet Menu Menu Option Description Manual Setup Configure the network settings. • Type: User can use the user-defined settings as they wish. • IP Address / Subnet Mask / Def. Gateway / Pref. DNS / Alt. DNS: Enter the respective network parameters. • Connect: Verify the network connection. Note • Check with your Information Technology Provider for the correct setting. • Be sure the RJ-45 cable is properly connected. 31 QuadHD84 User Manual 020-000671-01 Rev.
OSD Menus Wide Menu Select how the picture displays on the screen. As you select an option, you will see the screen adjusting to the different size. Note • The available menu options varies depending on the input source. • “Wide” menu is not available if the input source is 4k2k. • The option is either “Panoramic” or “Stretch” depend on input screen format: - Panoramic: Standard screen format (ex. 4:3) - Stretch: Wide screen format (ex. 16:9) QuadHD84 User Manual 020-000671-01 Rev.
OSD Menus Sleep Timer Set the timer to turn the display off at the preset time. Note You can also access the Sleep Timer menu by pressing the SLEEP button on the remote control. 33 QuadHD84 User Manual 020-000671-01 Rev.
Multimedia Mode Multimedia Menu This display is equipped with USB port that enables you to view photos, listen to music, or watch videos stored on a USB storage device. Multimedia support format Container ASF Extensions .asf .wmv Audio/Video Video AVI/DivX .avi Video/Audio MPEG-2 .vob PS (Program Stream), VOB, SVCD MP4 .mp4 MP3 .mp3 WAVE/WAV .wav JPEG .jpeg .jpg Note Video/Audio Audio • There may be files with these extensions that do not play correctly due to Codec differences.
Multimedia Mode Playback Music 1. Select Audio and press the OK button to enter the main Music content browser. 2. In the main Music content browser, use the p/q button to select a song. 3. Press the OK button to play, and an automatic playback begins from the selected song. n Press the Press the icon to pause the selected song playback. button to resume the playback. n You can highlight the icon and press the OK button to skip to the next song.
Multimedia Mode Watching Videos 1. Select Video and press the OK button to enter the main Video content browser. 2. In the main Video content browser, use the p/q button to select a video. 3. Press the OK button to begin the video playback. n Press the icon to pause the selected video playback. Press the resume the playback. n Press the playback. button to fast-forward the video n Press the button to rewind the video playback. n Press the button to stop the playback.
Multimedia Mode Viewing Photos 1. Select Photo and press the OK button to enter the main Photo content browser. 2. In the main Photo content browser, use the p/q/t/u buttton to select a photo. 3. Press the OK button to view in full screen. 4. To begin a slide show, select Start Slideshow and press the OK button. A slide show begins from the selected photo. n Press the button to pause the slide show, or press the slide show. button to stop the n Select Sort to specify the file sorting method.
Changing Display Mode Set Aspect Ratio 1. Turn on the display. 2. Press the WIDE button on the remote control. The Aspect Ratio menu appears on the screen. 3. Use the p/q button to select the aspect ratio of the display and press the OK button to confirm. Normal Stretch Wide Panoramic Zoom Note • The available menu options varies depending on the input source. • The option is either “Panoramic” or “Stretch” depend on input screen format: - Panoramic: Standard screen format (ex.
Troubleshooting No image is displayed l Is the power cord connected? • See if the power cord is properly connected to the outlet. l Is the power indicator light on? • See if the power switch is turned on. l Power is on, power indicator is blue but the screen appears extremely dark. • Adjust brightness and contrast again. l Is the power indicator amber? • If the display is in power saving mode, move the mouse or press any key. • Backlight may need repair. • Turn both devices off and then back on.
Troubleshooting After-image appears on the screen l After-image appears when the previous image changed. • If you display a fixed image for a long time, the pixels may be damaged quickly. Use the screen-saver function. Screen color is abnormal l Screen has poor color resolution (16 colors). • Set the number of color to more than 24 bits (true color). Select Control Panel –Display–Settings–Color Table menu in Windows. l Screen color is unstable or mono-colored.
Specifications The product specifications can change without prior notice for product improvement. LCD Panel Power Size Native Resolution Aspect Ratio Frame Rate Brightness Contrast Ratio Response Time Display Color 84” 3840 x 2160 16:9 120Hz 350 nits 1400:1 (Typical) 5ms (Typical) 1.06 Billion Input Voltage 100 ~ 240Vac Input Frequency 50/60 Hz On 550W Standy ≤ 3W Controllable ≤ 15W Standby Power Consumption (Max) Dimensions (Width x Height x Depth) Dimensions & Weight 1919.2mm x 1105.
Specifications PC Mode (RGB) – Preset Mode Mode No. Resolution Refresh rate 1 720 x 400 70Hz 2 640 x 480 60Hz 3 640 x 480 75Hz 4 800 x 600 60Hz 5 800 x 600 72Hz 6 800 x 600 75Hz 7 1024 x 768 60Hz 8 1024 x 768 70Hz 9 1024 x 768 75Hz 10 1280 x 1024 60Hz 11 1280 x 1024 75Hz 12 1920 x 1080 60Hz HDMI – Preset Mode Single HDMI Mode No. Resolution Refresh rate 1 640 x 480 P 60Hz 4:3 2 720 x 480 P 59.
Specifications Single HDMI Mode No. Resolution Refresh rate 15 3840 x 2160 23.98Hz 16 3840 x 2160 24Hz 17 3840 x 2160 25Hz 18 3840 x 2160 29.97Hz 19 3840 x 2160 30Hz UHD60 (4x HDMI) Mode No. Resolution Refresh rate 1 3840 x 2160 50Hz 2 3840 x 2160 60Hz Component Mode – Preset Mode Mode No. Resolution Refresh rate 1 720 x 480 I 59.94Hz 2 720 x 480 P 59.
Daisy Chain Connection Use this method to connect several displays to a single PC. You can control several displays at a time by connecting them to a single PC. Connecting the cable Connect the RS-232C cable as shown in the illustration. * The RS-232C protocol is used for communication between the PC and display. You can turn the display on/off or adjust the OSD menu from your PC.
HDMI CEI Connection With Consumer Electronics Interface (CEI) feature, you can command and control two or more CEC-enabled boxes, that are connected through HDMI, by using only one of their remote controls. (e.g. controlling a television set, settop box and DVD player using only the remote control of the display). Connecting the cable Connect the HDMI cable as shown in the illustration. HDMI HDMI Display *Not support HDMI splitter or Daisy Chain connection, only support PC-Display 1:1 control.
RS-232C RJ-45 Controlling the Multiple Product Header (5 bytes) Set Power 0xCC 0x33 0 # of payload bytes 4 Ack Set Power Set Input Source 0xCC 0x55 0 4 0x10 0xCC 0x33 0 4 0x11 Ack Input Source Read Input Source Ack Read Input Source 0xCC 0x55 0 4 0x11 0xCC 0x33 1 4 0x11 0xCC 0x55 1 4 0x11 command Prefix code Prefix code Set Payload #0 #1 ID Type Checksum (1byte) Payload (4 bytes) Command data #0 0x10 0 : 0ff 1 : On 0xE0 : OK 0xE1 : NG 0x30 : VGA1 0x40 : DVI1 0x50 : HD
RS-232C RJ-45 Controlling the Multiple Product RS232C CheckSum Header (5 bytes) Prefix code Prefix code #0 #1 Set Power 0xCC 0x33 command Set ID Checksum (1byte) Payload (4 bytes) Payload # of payload Command Type bytes 0 4 0x10 data #0 data #1 data #2 CS #0 "0 : 0ff 1 : On" reserved (0x00) reserved Header XOR (0x00) Payload We can make CheckSum with Header (5 bytes) and Payload(4 bytes).
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL Temporary noise is normal when powering ON or OFF this device.
Corporate offices Worldwide offices USA – Cypress ph: 714-236-8610 Australia ph: +61 (0) 7 3624 4888 Canada – Kitchener ph: 519-744-8005 Brazil ph: +55 (11) 2548 4753 Consultant offices China (Beijing) ph: +86 10 6561 0240 Italy ph: +39 (0) 2 9902 1161 China (Shanghai) ph: +86 21 6278 7708 Eastern Europe and Russian Federation ph: +36 (0) 1 47 48 100 France ph: +33 (0) 1 41 21 44 04 Germany ph: +49 2161 664540 India ph: +91 (080) 6708 9999 Singapore ph: +65 6877-8737 Japan (Tokyo) ph: 81 3 3599
