User manual

Section 4: Specifications

TVC-1211 User Manual 4-7

020-100769-01 Rev. 4 (05-2012)

4.5 Input (Source Signal) Compatibility

4.5.1 Video Input (V16A)

16-Port Multiple Video Input Module (V16A)

• Card Format 32bit 66Mhz PCI adapter

• Card Size 105 mm (4.1”) x 310mm (12.2”)

• Max. Cards per Expansion Chassis 8

• Number of Capture Channels 16

• Max. Capture Resolution per Channel 720 x 288

• Supported Video Formats PAL, NTSC, SECAM in either Composite or S-Video

• Video Window Update Rate Real time: 25/30 fps (PAL/NTSC)

• Max. Power Consumption 23.73 watts

• Max. Power Requirements +12V @1.4A, +3.3V @ 2.1A

Composite and S-Video Input

• Signal Formats Composite-video (CVBS), S-video (Y/C)

• Video Standards

• NTSC M, NTSC J, NTSC N, NTSC 4.43 50/60, PAL I, PAL B, PAL D, PAL G, PAL H, PAL M, PAL N,

PAL NC, PAL4.43 60, SECAM B, SECAM D, SECAM G, SECAM K, SECAM L, SECAM L, SECAM

• Input Levels Composite Video 1.0 Vp-p ± 3dB (including sync tip)

• S-Video Luma (Y) 1.0 Vp-p ± 3dB (including sync tip)

• S-Video Chroma (C) 630 mVp-p nominal (burst)

• Connector Type BNC

•DC Offset ±2V

• Nominal Impedance 75 ohms

• VS16 Bandwidth 60 MHz (-3dB)

• Crosstalk -80dB @ 20kHz (V16A)

4.5.2 Standard Input VGA Connectors (D2R2)

NOTES: 1) Sync signals cannot be swapped between the horizontal/composite and vertical connectors.

2) Sync signal(s) can be negative or positive polarity. 3) Sync present on any of the RGB signals will be

ignored when separate or composite sync is input. 4) Sync can be bi-level. 5) ‘No signal’ means no signal

should be applied to the input.

Signal Description Red Green Blue

Hor/

Comp

Vert

RGB with H&V Sync (5 wire) 1, 2, 3 Red Green Blue H-Sync V-Sync

RGB with composite sync (4 wire) 1, 2, 3, 4, 5 Red Green Blue Comp sync No signal

RGB with sync-on-green (3 wire) 4, 5 Red Green w/sync Blue No signal No signal