User manual

4-8 TVC-1211 User Manual
020-100769-01 Rev. 4 (05-2012)
Section 4: Specifications
4.5.3 DVI Input (D2R2)
NOTE: This specifies frame rate for non-interlaced sources and field rate for interlaced sources. Signals will
be displayed at a lower rate (i.e., frame will be dropped).
• Card Format 64bit 133Mhz PCI-X
• Card Size 105mm (4.1”) x 170mm (6.7”)
• Connectors 2 DVI-I connectors
• Video Capture Memory 64MB triple buffered
• Max. Power Consumption 10.2 Watts
• Max. Current at +3.3V 500mA
• Max. Current at +5V 1.7A
• Input Connector Type Single link DVI-I, HD15 VGA, HDMI or component (with
adapter
• Max. cards per Expansion Chassis 8 (16 capture channels)
• Max. cards per system 16 (32 capture channels)
• Frame rate **Depends on resolution (see below)
• Resolution-digital 640x480 (VGA), 800x600, 1024x768, 1280x1024,
1600x1200, 1920x1080, 1920x1200 (WUXGA)
• Resolution-analog 640x480 (VGA), 800x600, 1024x768, 1280x1024,
1600x1200, 1920x1080, 2048x1536 (QXGA)
• Bandwidth 480MB/s
• Video bus PCI-X
• Wall placement Anywhere on the display wall
• HDCP Not supported
• Analog input range Min. 0.5Vpp, MAx 1.0Vpp
• Input offset ±2V
• Hsync 15kHz-110kHz
• Vsync No hardware limits, typically 25Hz - 200Hz for real signals
• Separate sync polarity Positive or negative (separate H & V sync, composite sync)
• Sync On green polarity Negative
• Inputs 75ohms terminated
4.6 Regulatory
4.6.1 Safety
• CAN/CSA C22.2 No. 60950-1
• UL 60950-1
• IEC 60950-1
4.6.2 EMC
• FCC, Part 15, Subpart B, Class A
• EN55022/CISPR22 Class A
• EN55024 / CISPR24