Operation Manual

22
G. RPM/SPEED/KMH Display: Indicates only 1 value of RPM,
SPEED, or KMH displayed depending on the programs.
H. DISTANCE/ODO/FAT% Display: Indicates only 1 value of
DISTANCE, ODO or FAT% displayed depending on the programs.
I. CAL/WATT/BMR Display: Indicates only one value of CAL,
WATT, or BMR displayed depending on the programs.
J. TARGET H.R./BMI/AGE Display: Indicates only one value
of TARGET HEART RATE, BMI, or AGE displayed depending on the
programs.
K. HEART RATE/BODY TYPE Display: Indicates only one value of
HEART RATE or BODY TYPE displayed depending on the programs.
L.
LOADING Profiles: There are 10 columns of loading bars, and 12 bars in
each column. Each column represents 3 minutes workout (without the
change of TIME value), and each bar represents 2 levels of loading.
• Operating Ranges
Computer Instructions for 1107,11071
The monitor is designed for programmable magnetic bikes and
introduced with the following categories:
- Key Functions
- About Displays
- Operating Ranges
- Things You Should Know Before Exercising
- Operation Instructions
• Key Functions
There are total 6 keys including START/STOP, ENTER(E),
FUNCTION(F), UP(+), DOWN(-), and RECOVERY (TEST).
A. START/STOP: Starts or stops the program chosen. And, resets
the monitor by pressing and holding for 2 seconds.
B. ENTER(E): Chooses the functions from PROGRAMS, GENDER,
TIME, HEIGHT, WEIGHT, DISTANCE, WATT, CAL, TARGET
HEART RATE, AGE, and 10 columns. The chosen function shall
flash. Please note that not all the functions can be selected in
every program according to the types of each program.
C. FUNCTION(F): Changes the displays of the values between
RPM or SPEED, DIST or ODO and KCAL or WATT. The values
of RPM, DIST and WATT show at the same time, or the values
of SPEED, ODO and KCAL do by pressing it.
D. UP(+): Selects or increases the values of PROGRAMS,
GENDER, TIME, HEIGHT, WEIGHT, DISTANCE, WATT, CAL.,
TARGET HEART RATE, AGE, and 10 columns.
E. DOWN(-): Selects or decreases the values of PROGRAMS,
GENDER, TIME, HEIGHT, WEIGHT, DISTANCE, WATT, CAL.,
TARGET HEART RATE, AGE, and 10 columns.
F. RECOVERY(TEST): Starts the function of PULSE RECOVERY.
• About Display
A.
START: Indicates the program selected has started.
B.
STOP: Indicates the program selected has stopped. And, users
are free to change the programs and the value of functions
applied.
C.
PROGRAM: Indicates the programs selected from
PROGRAM 1 to PROGRAM 17
D. LEVEL: Indicates the level of loading selected from LEVEL 1 to
LEVEL 24.
E.
GENDER: Indicates the gender (Male or Female) selected.
F.
TIME/HEIGHT/WEIGHT Display: Indicates only 1 value of TIME, HEIGHT,
or WEIGHT displayed depending on the programs.
Programs Variables
P1 - P7 TIME, DISTANCE, CAL, AGE
P8 GENDER, HEIGHT, WEIGHT, AGE
P9 TIME, DISTANCE, CAL, TARGET H.R.
P10 - P12 TIME, DISTANCE, CAL, AGE
P13 - P16 TIME, DISTANCE, CAL, AGE, 10 INTERVALS
P17 TIME, DISTANCE, WATT, AGE
Values Range (Count
up)
Count down Preset Increment
(Decrement)
PROGRAM 1 ~ 17 17 ~ 1 1 1
LEVEL 1 ~ 24 24 ~ 1 N/A 1
GENDER Male, Female N/A Male N/A
TIME 0:00 ~ 99:00 99:00 ~ 0:00 0:00 1:00
HEIGHT (cm) 100 ~ 250 250 ~ 100 175 1
WEIGHT (kg) 20 ~ 150 150 ~ 20 70 1
DISTANCE 0.00 ~ 99.90 99.90 ~ 0.00 0.0 0.1
WATT 20 ~ 400 N/A 100 5
TARGET H.R. 60 ~ 220 220 ~ 60 120 1
AGE 10 ~ 99 99 ~ 10 35 1