Operation Manual

English

Step 3:

1. Backup the support tube covers left and right (56L+56R) in

each case with screw (12).

2. Slide the computer panels left and right (61L+61R) over the

support tubes left and right (2+3) in a proper position. Place the

computer (60) with the help of a second person to the support

tubes left and right (2+3) and connect the plug of computer

cable (13) and connecting cable (73).

3. Push the computer (60) with the computer holder into the sup-

port tubes (2+3) (without a cable to pinch it) and screw the com-

puter (60) to the support tubes (2+3) by means of screws (55)

and washers (32) ﬁrmly.

4. Slide the computer panels left and right (61L+61R) in the cor-

rect position under the computer (60) and attach them using

screws (9).

Step 4:

Checks

1. Check the correct installation and function of all screwed and

plug connections.

2. When everything is in order, connect the power supply cable

(18) with wall power (220-240V~50-60Hz) and switch (30) on the

main switch below the front frame.

3. Put the safety key (62) onto the computer and the computer will

show normal manual mode. Put the safety clip (62) at your exer-

cising cloth and stand on the side rails (20). Press Start-Button

and after a Count Down the treadmill start moving.

Start walking onto the walk surface (5) when speed is slowly and

follow the speed. Familiarize yourself with the machine at a low

speed settings.

4. Run in the middle of the running surface (5), hold yourself tight at

hand gripsl if you feel insecure and don’t step on the side foot rails

(20). Only run with look at the Computer on the treadmill during

the running. In emergency case, step of the treadmill lateral and

hold on to the hand grips.

5. If you like to use an external MP3 player for example, connect

with cable (80) and computer.

Note:

Please keep the tool set and the instructions in a safe place as

these may be required for repairs or spare parts orders becoming

necessary later.