Operation Manual

10
Illustration Designation Dimensions Quantity Attached to ET number
No. mm illustration No.
1 Cover 1 22 36-1473-01-BT
2 Handlebar left 1 4+7 33-9836111-SI
3 Handlebar right 1 5+7 33-9836112-SI
4 Handrail tube left 1 2+22 33-9836113-SI
5 Handrail tube right 1 3+22 33-9836114-SI
6 Computer 1 7 36-1473-03-BT
7 Support post 1 22 33-9836110-SI
8 Screw M8x20 4 7 39-10041
9 Washer 5//10 8 12 39-10111-SW
10 Nut M10 2 21 39-10032
11 Screw M8x40 2 2+3 39-9889-CR
12 Screw M5x15 8 2,3,4,5+22 39-9903
13 Screw M6x10 3 6 39-9964
14 Spring washer For M8 4 8 39-9864
15 Spring washer For M5 8 12 36-9111-18-BT
16 Washer 8//16 4 8 39-9962-CR
17 Selflocking Nut M8 2 22 39-9918-CR
18 Cable 1 6 36-9836104-BT
19 Foot mat 1 22 36-9836120-BT
20 Pulse unit w/cable 2 6 36-9836106-BT
21 Foot high adjustable 2 22 36-9836107-BT
22 Base frame 1 33-9836109-SI
23 PC board for motor 1 22 36-9836121-BT
24 Motor 1 22 36-9836122-BT
25 Belt 1 24+26 36-1473-02-BT
26 Belt wheel unit 1 22 36-9836124-BT
27 Rubber cap 2 22 36-1473-04-BT
28 Termed insurance 1 22 36-9836111-BT
29 On/Off switch 1 22 36-9836112-BT
30 Power cable 1 22 36-9836113-BT
31 Handlebar wrapping 2 2+3 36-9836114-BT
32 Transportation wheels 2 22 36-9836125-BT
33 Assembly- and exercise instruction 1 36-1473-05-BT
Please contact us if any components are defective or missing, or
if you need any spare parts or replacements in future:
Internet service- and spare parts data base:
www.christopeit-service.de
Top-Sports Gilles GmbH
Friedrichstr. 55
42551 Velbert
Telefon: [phone] - 6 06 70
Telefax: +49 (0) 20 51 - 6 06 74 4
e-mail: [e-mail]
www.christopeit-sport.com
Parts List – Spare Parts List
Vibro I Best.-Nr. 1473
Technical data: Issue: 30. 01.2019
Vibration Trainer with bob up and down
Great effect with the least effort.
The Vibro I training covers four areas: strength, stretching,
massage and relaxation.
Muscle reflexes may stimulate the whole body through inten-
sive vibration.
• Powerful engine (0,5 kW)
• Side alternating bounce movement
• Speed levels 1-20
• 3 stored training programs
• 1 manual program (with input of exercise time from 1 – 10 Minutes)
• 4 feet for vibration damping and stable positioning
• Moving way footplate 0-13mm (amplitude 0-5mm)
• Training frequency 6-16Hz
• LED Computer with 3 windows display: Speed level, Time and Body fat
analysis
• Electrical data: 220-240V/50Hz/520 Watt
• Load max. 150 kg (Body weight)
• Product weight approx. 31 kg
• Transport rollers
Space requirement approx.: L 70 x W 74 x H 121 cm
0 5 10 15 20 25 30 35 40 50 60 70 80 90 100 mm
This Vibro I is created only for private Home sports activity and not
allowed to us in a commercial or professional area.
Home Sport use class H/C