User manual

M8 Plus User Manual 13 V1.3 September 2012
www.chroma
-
q.com
‘G
GG
Gel
ll
l Saver’
Mode
Switches on/off the gel
saving mode.
The display shows the current gel saver mode.
Press UP or DOWN once to switch between on (1) and off
(0).
See also, gel saver mode instructions
‘sp
spsp
speed’
Mode
Used to set the scrolling
speed of the unit.
The display shows the current gel scrolling speed. There
are two scrolling speeds. 1 is the slowest, 2 is the fastest.
Press UP or DOWN once to increment or decrement the
value,
See also, gel scroll speed instructions
‘d
dd
disP
PP
Play’
Mode
Switches on/off the
display
Switches the display on or off. Display will re-activate when
any button is pressed.
Press UP or DOWN to switch between on (1) and off (0).
(See also, display mode instructions)
‘remote-
operation’
Mode1 =single DMX
channel operation.
Mode 2 = Dual DMX
channel operation
(Colour/Fan speed)
Mode 3 = Dual DMX
channel operation
(Colour/Function)
The display shows the current DMX mode of the unit. There
are three DMX modes
Press UP or DOWN button to increment or decrement the
mode setting,
Default Settings:
Factory default settings
If the MENU and the UP button are pressed and held for 1 second, the unit will reset to the factory default
settings. This feature is particularly useful when the units are used in many different configurations or
shows.
The reset function is also available through ‘Remote Operation’
The Factory default settings put the unit in its manufacturer operating mode.
Fan speed = 4 (fast)
Gel saver = 0 (off)
Gel speed = 1 (slow)
Display = 1 (on)
Remote operation = 1 (normal)
Display flip = standard