User's Manual

SC103 Gateway User Manual 2010-08-29
Chromagic Technologies Co., Ltd. Page 11 of 22
CONFIDENTIAL
7.2.1. NTP Settings
The HSC04 has not the RTC, which means if the power is off, the system time
will be reset or stopped.
So at the boot time, the HSC04 will synchronize the system time with the NTP
server.
The default NTP settings:
NTP function enable: Yes
NTP Server: clock.via.net
Time Zone: 0
If connect to NTP server failed, it will try again after 1 hour.
If synchronize the time OK, after 4 hours it will synchronize again.
After boot up, the HSC04 detected the system time is not be set. The power
LED will flash once every 5 seconds.
The user can set the NTP settings from the browser.
Figure 13: System Settings