User's Manual

SC103 Gateway User Manual 2010-08-29
Chromagic Technologies Co., Ltd. Page 20 of 22
CONFIDENTIAL
Figure 26: The count down in the bootloader runtime.
After the count down, the browser will re-connect to 192.168.1.222. But if the
HSC04 has enabled the DHCP function, the IP will be changed, the user needs
to connect to the newest IP manually.
8. U-Net Bind
The bind is an operation of the U-Net, it is for include the other U-Net devices to
the HSC04.
Here will describe how to use the connection button to operate the binding
function.
 Start binding:
Push the connection button once. The connection LED will start to blink the
green light.
 Bind device:
Let other U-Net device start binding, For example: the SR801, press the
disarm key and hold over three seconds. If bind successful, the connection
LED of the HSC04 will stop blinking, and turn on 2 seconds, and then turn
off 2 seconds.
 Cancel binding:
In the binding mode, the connection LED is blinking, push the connection
button again, the connection LED will quickly flashing. It will stop binding.