User guide

• The top tether strap anchorages are located in the trunk behind the rear seatback. The access
ports to the top tether anchorages are directly behind the seat headrests under a plastic cover.
• Loosen the child seat adjusters on the lower straps and tether straps so that you can attach the
hook or connector to the lower and tether anchorages more easily.
• Attach the lower hooks or connectors over the top of the seat cover material.
• If lowered, raise the convertible top.
NOTE:
The convertible top must be in the UP position to access the tether anchor.
• Open the access port cover behind the seat where you are placing the child restraint.
• Push the tether strap and hook through the
access port and down into the trunk.
NOTE:
Route the tether strap to provide the most direct path from the child seat to the anchor.
•
From inside the trunk, open the access cover on the carpet covering the back of the seat and
attach the tether strap hook to the anchor.
• Tighten all three straps as you push the child
restraint rearward and downward into the seat.
GETTING STARTED
12