User guide

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant–
2.4L Engine
We recommend you use MOPAR®
Antifreeze/Coolant Ten Year/
150,000 Mile Formula OAT
(Organic Additive Technology).
7.7 Quarts (7.3 Liters) Includes
heater and coolant recovery
bottle filled to MAX level.
Engine Coolant–
3.6L Engine
We recommend you use MOPAR®
Antifreeze/Coolant Ten Year/
150,000 Mile Formula OAT
(Organic Additive Technology).
11.6 Quarts (11 Liters) Includes
heater and coolant recovery
bottle filled to MAX level.
Engine Oil with Filter–
2.4L Engine
We recommend you use API
Certified SAE 5W-20 engine oil,
meeting the requirements of
Chrysler Material Standard
MS-6395. Refer to the engine oil
filler cap for correct SAE grade.
4.5 Quarts (4.4 Liters)
Engine Oil with Filter–
3.6L Engine
We recommend you use API
Certified SAE 5W-20 engine oil,
meeting Chrysler Material
Standard MS-6395. Refer to your
engine oil filler cap for correct
SAE grade.
6 Quarts (5.6 Liters)
Fuel Selection –
All Engines
(Except 2.4L PZEV)
87 Octane 16.9 Gallons (64 Liters)
(Approximate)
Fuel Selection–
2.4L PZEV Engine
87 Octane 18.5 Gallons (70 Liters)
(Approximate)
Engine Oil Filter We recommend you use
MOPAR® brand Engine Oil Filters.
—
Spark Plugs 2.4L–
Except PZEV Engine
ZFR5F-11 (Gap 0.043 in [1.11 mm]) —
Spark Plugs 2.4L–
With PZEV Engine
ZFR5AP (Gap 0.031 in [0.8 mm]) —
Spark Plugs– 3.6L Engine
RER8ZWYCB4
(Gap 0.043 in [1.1 mm])
—
Automatic Transmission
We recommend you use
MOPAR® ATF+4® Automatic
Transmission Fluid.
—
Brake Master Cylinder
We recommend you use
MOPAR® DOT 3 and SAE J1703.
If DOT 3 is not available, then
DOT 4 is acceptable.
—
Power Steering Reservoir
We recommend you use
MOPAR® Power Steering
Fluid +4 or MOPAR® ATF+4®
Automatic Transmission Fluid.
—
MAINTAINING YOUR VEHICLE
91