SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number . . . . . . . . . . . . . . . 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Modifications / Alterations . . . . . . . . . . . 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . .
INTRODUCTION INTRODUCTION This manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a Warranty Information Booklet and various customer oriented documents. You are urged to read these publications carefully. Following the instructions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle.
INTRODUCTION 5 1
INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures which could result in an accident or bodily injury. It also contains CAUTIONS against procedures which could result in damage to your vehicle. If you do not read this entire manual you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS / ALTERATIONS 1 WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . .12 ▫ Manual Door Locks . . . . . . . . . . . . . . . . . . . . .17 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . .12 ▫ Power Door Locks — If Equipped . . . . . . . . . .18 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . .13 䡵 Remote Keyless Entry — If Equipped . . . . . . . . .20 䡵 Sentry Key . . . . . . . . . . . . . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 䡵 Vehicle Theft Alarm — If Equipped . . . . . . . . . . .27 ▫ Power Windows . . . . . . . . . . . . . . . . . . . . . . .40 䡵 Sliding Side Door . . . . . . . . . . . . . . . . . . . . . . . .29 䡵 Occupant Restraints . . . . . . . . . . . . . . . . . . . . . .41 ▫ Sliding Door Open Flash . . . . . . . . . . . . . . . . .30 ▫ Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . .43 ▫ Power Sliding Door — If Equipped . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Child Restraint . . . . . . . . . . . . . . . . . . . . . . . .70 䡵 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 䡵 Rear Seat Delete Feature (Commercial Vehicles Only) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .78 ▫ Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . . . .83 ▫ Restraining Infants And Small Children With Seat Delete Feature (Commercial Vehicles Only) . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS be used to order duplicate keys from your dealer. Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal The shift lever must be in PARK. Turn the key to the OFF position, then the LOCK position. Remove the key. Vehicle Key You can insert the double sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The power window switches, radio, power outlets, and removable console (if equipped), will remain active for up to 45 seconds after the ignition switch has been turned off. Opening a vehicle front door will cancel this feature. WARNING! Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector lever.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE chip (transponder) embedded into them. Only keys that have been programmed to the vehicle can be used to start and operate the vehicle. The Sentry Key Immobilizer System does not need to be armed or activated. Operation of the system is automatic regardless of whether or not the vehicle is locked or unlocked.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE All of the keys provided with your new vehicle have been programmed to the vehicle electronics. Replacement Keys NOTE: Only keys that have been programmed to the vehicle electronics can be used to start the vehicle. Once a Sentry Key has been programmed to a vehicle, it can not be programmed to any other vehicle. At the time of purchase, the original owner is provided with a four digit PIN number. This number is required for dealer replacement of keys.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Insert a blank Sentry Key into the ignition switch and turn the ignition switch ON within 60 seconds. After 10 seconds a single chime will sound. The Theft Alarm Light will stop flashing, turn on for 3 seconds; then turn off. General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: The new Sentry Key has been programmed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 NOTE: • The front courtesy overhead console, door courtesy and liftgate lights do not turn on if the dimmer control is in the interior lights ON position (extreme top position). 2 • The illuminated entry system will not operate if the dimmer control is in the “defeat” position (extreme downward position). DOOR LOCKS Manual Door Locks Lock the doors by pushing down on the lock plungers on each door trim panel.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe personal injuries and death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 If you press the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you from accidentally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate. A chime will sound if the key is in the ignition switch and a door is open, as a reminder to remove the key.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Unlock On Exit— If Equipped The doors will unlock automatically on vehicles with power door locks if: 1. The Auto Door Locks feature is enabled and the Auto Unlock On Exit feature is enabled, 2. the transmission was in gear and the vehicle speed returned to 0 mph (0 km/h), 3. the transmission is in NEUTRAL or PARK, 4. any door is opened (excluding liftgate) and 5. the vehicle speed is 0 mph (0 km/h).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE equipped from the factory with three button transmitters and those built with power options will be equipped with six button transmitters. Three button transmitters will provide basic UNLOCK, LOCK and PANIC functions. 21 Six button transmitters will provide functions that allow the same basic operation as the three button, but may also be used to Open/Close the optional power liftgate, left power sliding door, or right power sliding door.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To unlock the doors and liftgate: Press and release the UNLOCK button on the transmitter once to unlock the driver’s door side of the vehicle, or twice to unlock all doors and liftgate. The illuminated entry system also turns on. The Remote Unlock Driver’s Door 1st feature can be enabled or disabled by performing the following procedure: 1. Press the UNLOCK button for 5 to 10 seconds. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using The Panic Alarm: To turn the panic alarm feature ON or OFF, press and hold the PANIC button on the transmitter for at least one second and release. When the panic alarm is on, the headlights and park lights will flash, the horn will pulse on and off and the interior lights will turn on. The panic alarm will stay on for 3 minutes unless you turn it off by pressing the PANIC button a second time or by turning the ignition switch to the ON position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Open/Close Left Power Sliding Door — If Equipped Press the LEFT button twice within five seconds to open/close the left power sliding door. If the button is pushed while the door is being power closed, the door will reverse to the full open position. If the vehicle is not equipped with a left power sliding door and the door is closed and locked, pressing the button twice will result in the left side doors becoming unlocked.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE vehicles so equipped. The table below explains the Lamp Flash options. (See page 169 for more information.) Function Lock Unlock 1st Press Unlock All Doors Left Side Right Side Liftgate Which Turn Signal Lamps All Left Side Number of Flashes 1 2 All 2 Left Side Right Side All 2 2 2 25 General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transmitter Battery Service The recommended replacement battery is one CR2032 battery. NOTE: Do not touch the battery terminals that are on the back housing or the printed circuit board. 1. With the transmitter buttons facing down, use a thin coin to pry the two halves of the transmitter apart. Make sure not to damage the rubber gasket during removal. Separating Transmitter Halves 2. Remove and replace the batteries.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. To reassemble the transmitter case snap two halves together. Make sure there is an even “gap” between the two halves. Test transmitter operation. VEHICLE THEFT ALARM — IF EQUIPPED This system monitors the vehicle doors and ignition switch for unauthorized entry or operation. When the alarm is activated, the system provides both audible and visual signals.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE described previously, when closing the liftgate. If something has triggered the system in your absence, the horn will sound three times when you disarm the system. Check the vehicle for tampering. NOTE: • The driver’s door and liftgate key cylinders cannot arm or disarm the system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SLIDING SIDE DOOR The sliding door may be opened from the inside or the outside. Pull out on the outside handle to open the sliding door from the outside. To open the sliding door from the inside, press the button on the grab handle and open the door. 29 To keep your door operating properly, observe the following guidelines: • Always open the door smoothly. • Avoid high impacts against the door stop when opening the door.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The driver’s side sliding door cannot be opened while the fuel door is open. This feature operates only when the sliding door is fully closed prior to opening the fuel door. Sliding Door Open Flash When the sliding door(s) are opened, the left and right exterior hazard lights will flash for 12 seconds to alert other drivers in the area that passenger(s) could be entering or exiting the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The power sliding door may also be opened by pressing the switches on the overhead console or the switch located on the trim panel just in front of the sliding door. To keep your door operating properly, observe the following guidelines. There are power sliding door switches located on the trim panel just in front of the power sliding door for the rear seat passengers.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the inside or outside door handles are used while the power sliding door is activated, the power sliding door feature will be canceled and the door must be opened or closed manually. • If the power sliding door is not in the full open or close position, it will fully open when a power sliding door switch is pressed. To close the door, wait until it is fully open and then press the switch again.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Child Protection Door Lock To provide a safer environment for small children riding in the rear seats, the sliding doors are equipped with a child protection door lock system. 2 WARNING! To avoid trapping anyone in the vehicle in a collision. Remember that the sliding doors can only be opened from the outside door handle or the switches located on the trim panel just in front of the power sliding door when the child protection locks are engaged.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The power sliding door will operate from the switches located on the trim panel just in front of the power sliding door, regardless of the child lock lever position. To avoid unintentional operation of the power sliding door from the rear seats, press the button located in the overhead console to disable the switches for the rear seat passengers.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 NOTE: On vehicles without power locks, the liftgate can only be opened using the vehicle keys. The key must be held in the unlocked position for the liftgate to open. Power Liftgate — If Equipped The power liftgate may be opened manually or by using the button on the remote keyless entry transmitter. Press the button on the remote keyless entry transmitter twice within five seconds, to open the power liftgate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! During power operation, personal injury or cargo damage may occur. Ensure the liftgate travel path is clear. Make sure the liftgate is closed and latched before driving away. Power Liftgate Switch NOTE: • If anything obstructs the power liftgate while it is closing or opening, the liftgate will automatically reverse to the closed or open position, provided it meets sufficient resistance.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 • The power liftgate must be in the full open or close positions for any of the buttons to operate. If the liftgate is not in the full open or close positions it must be opened or closed manually. • If the power liftgate encounters multiple obstructions within the same cycle, the system will automatically stop and must be opened or closed manually.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Gas props support the liftgate in the open position. However, because the gas pressure drops with temperature, it may be necessary to assist the props when opening the liftgate in cold weather. Storage Bin Cover Emergency Release As a security measure, a Storage Bin Cover Emergency Release strap is built into the storage bin cover latching mechanism.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 NOTE: In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from inside of the bin by pulling on the glow-in-the-dark strap attached to the storage bin cover latching mechanism. 2 Reinstalling Storage Bin Cover Emergency Release If the storage bin cover strap disengages from the latch, it can be reinstalled by inserting the loose end of the strap into the latch mechanism.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS Power Vent Windows Switches on the driver’s door trim panel let the driver operate the two vent windows from the driver’s seat. Power Windows You can control either front window using switches on the driver’s door trim panel. There is a single switch on the passenger’s door trim panel which operates the passenger door window. The switches will operate only when the ignition switch is in the ON or ACCESSORY position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Auto Down Feature — If Equipped The driver’s window switch has an auto down feature. Press the window switch past the detent, release, and the window will go down automatically. the rear windows open, open the front and rear windows together to minimize the buffeting. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If your vehicle is equipped with the Occupant Classification System (OCS) there will be a Passenger Airbag Disabled (PAD) Indicator Light located on the center of the instrument panel. Passenger Airbag Disabled Light NOTE: The front airbags have a multi stage inflator design. This allows the airbag to have different rates of inflation that are based on collision severity. Please pay close attention to the information in this section.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All the outboard seats in your vehicle are equipped with Lap/Shoulder Belts. The belt webbing retractor is designed to lock during very sudden stops or collisions. This feature allows the shoulder part of the belt to move freely with you under normal conditions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forces of a collision the best. • Wearing your belt in the wrong place could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of part of the belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 2 Latch Plate 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click”.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well. In a sudden stop you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly. • A belt that is worn under your arm is very dangerous.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt can’t do its job as well. In a collision it could even cut into you. Be sure the belt is straight. If you can’t straighten a belt in your vehicle, take it to your dealer and have it fixed. 5.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Adjustable Upper Shoulder Belt Anchorage In the front seats and the second row outboard seats, the shoulder belt anchorage can be adjusted upward or downward to help position the belt away from your neck. The upper anchorage can be adjusted upward by pushing anywhere on the anchorage. To move the anchorage downward, press the actuation button while simultaneously pushing down on the anchorage assembly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180° to create a fold that begins immediately above the latch plate. 1. Position the latch plate as close as possible to the anchor point.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. Center Lap Belts The center seating positions have a lap belt only. To fasten the lap belt, slide the latch plate into the buckle until you hear a “click”. To lengthen the lap belt, tilt the latch plate and pull. To remove slack, pull the loose end of the webbing. Wear the lap belt snug against the hips.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A lap belt worn too loose or too high is dangerous. • A belt worn too loose can allow you to slip down and under the belt in a collision. • A belt that is too high will apply crash forces to the abdomen, not to the stronger hip bones. In either case, the risk of internal injuries is greater. Wear a lap belt low and snug.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE chime and flash the Seat Belt Warning Light for 96 seconds or until the driver’s or front passenger’s seat belt is buckled. 2. Turn the ignition switch to the RUN position (engine does not need to be running), and wait for the Seat Belt Warning Light to turn off.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Although the Enhanced Warning System (BeltAlert) has been deactivated, the Seat Belt Warning Light will continue to illuminate while the driver’s or front passenger’s seat belt remains unbuckled. Seat Belts and Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancies. Keeping the mother safe is the best way to keep the baby safe.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Driver And Front Passenger Supplemental Restraint Systems (SRS) — Airbags This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the center of the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the glove compartment. The words SRS AIRBAG are embossed on the airbag covers.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 The front airbags have a multi stage inflator design. This may allow the airbag to have different rates of inflation that are based on collision severity and occupant size. Also, the front passenger airbag is certified to the Federal regulations that define Occupant Classification (Refer to “Occupant Classification System” in this section).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Do not put anything on or around the airbag covers or attempt to manually open them. You may damage the airbags and you could be injured because the airbags are not there to protect you. These protective covers for the airbag cushions are designed to open only when the airbags are inflating. • If your vehicle is equipped with window bags, do not stack luggage or other cargo up high enough to block the location of the window bag.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If your vehicle is equipped, the window bag on the crash side of the vehicle is triggered in moderate to severe side collisions. But even in collisions where the airbags inflate, you need the seat belts to keep you in the right position for the airbags to protect you properly. Here are some simple steps you can take to minimize the risk of harm from a deploying airbag. 1. Children 12 years old and under should always ride buckled up in a rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE You should read the instructions provided with your child restraint to make sure that you are using it properly. 2. All occupants should wear their lap and shoulder belts properly. 3. The driver and front passenger seats should be moved back as far as practical to allow the front airbags room to inflate. 4. If your vehicle has window bags, do not lean against the door, airbags will inflate forcefully into the space between you and the door.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 The Airbag System consists of the following: • Front Seat Belt Buckle Pretensioners • Occupant Restraint Controller (ORC) • Interconnecting Wiring • AIRBAG Readiness Light • Knee Impact Bolster • Driver Airbag • Driver Inflatable Knee Blocker • Front Passenger Airbag • Front Passenger Seat Occupant Classification System (OCS) — If Equipped • Window Bags above Side Windows (If Equipped) • Front Impact Sensors − Occupant Classification Module • Side
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How The Airbag System Works • The Occupant Restraint Controller (ORC) determines if a frontal collision is severe enough to require the airbags to inflate. Based on the level of collision severity, the front control module determines the proper rate of inflation. The front airbag inflators are designed to provide different rates of airbag inflation.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the AIRBAG warning light in your instrument panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away. • The Driver and Passenger Airbag/Inflator Units are located in the center of the steering wheel and the right side of the instrument panel.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE about 30 milliseconds (about one quarter of the time it takes to blink your eyes) with enough force to injure you if you are not belted and seated properly, or if items are positioned in the area where the window bag inflates. This especially applies to children. The window bag is only about 31⁄2 inches (9 cm) thick when it is inflated.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE affect occupant classification. Also, if you fold down the rear seat, check to be sure it doesn’t touch the front passenger seat. If there is a rapid change in temperature or humidity, the OCS may not be able to properly approximate occupant size. If your seat including your trim cover and cushion needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE For almost all sizes of properly seated adults, the airbag will be enabled in the event of a collision. For small teenagers and some small adults, depending on size, the airbag may or may not be enabled in the event of a collision. Both drivers and passengers should always use the PAD indicator light as an indication if the front passenger is properly positioned or not.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Passenger Airbag Disabled (PAD) Indicator Light — If Equipped indicates to the driver and passenger when the airbag is turned OFF in the presence of a properly seated occupant. When the PAD indicator light is illuminated, the airbag is OFF.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Unapproved modifications or service procedures to the front passenger seat assembly, its related components, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is involved in an accident. A modified vehicle may not comply with required Federal Motor Vehicle Safety Standards (FMVSS).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If A Deployment Occurs The airbag system is designed to deploy the airbags when the ORC and impact sensors detect a moderate-tosevere collision, to help restrain the vehicle passengers, and then immediately deflate. NOTE: A collision that is not severe enough to need airbag protection will not activate the system. This does not mean something is wrong with the airbag system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Deployed airbags, front seat belt buckle pretensioners and driver inflatable knee blocker cannot protect you in another collision. Have the airbags, front seat belt buckle pretensioners and driver inflatable knee blocker replaced by an authorized dealer as soon as possible. Also, have the Occupant Classification System serviced as well.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • You need proper knee impact protection in a collision. Do not mount or locate any aftermarket equipment on or behind the knee bolsters. • It is dangerous to try to repair any part of the airbag system yourself. Be sure to tell anyone who works on your vehicle that it has airbags. Airbag Light You will want to have the airbags ready to inflate for your protection in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraint Everyone in your vehicle needs to be buckled up at all times — babies and children, too. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it. Children 12 years and under should ride properly buckled up in a rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants and Child Restraints • Safety experts recommend that children ride rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types of child restraints can be used rearward-facing: infant carriers and ⬙convertible⬙ child seats. Both types of child restraints are held in the vehicle by the lap/ shoulder belt or the LATCH child restraint anchorage system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who are still too small to fit the vehicle’s seat belts properly. If the child can not sit with knees bent over the vehicles seat cushion while the child’s back is against the seat back, they should use a belt-positioning booster seat. The child and booster seat are held in the vehicle by the lap/ shoulder belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. • A rearward facing child restraint should only be used in a rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle end of the belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 over the top of the seatback. For bench seats with split seatbacks, route the tether between the seatbacks. When using the tether anchorages in the center position on 3rd row fold-in-floor seating, ensure that the strap is routed over the top of the seatback and under the head restraint between the head restraint posts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Child restraint systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the seatback tether anchorage have been available for some time.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE seat belt is tucked behind the child restraint and out of reach. If the buckled seat belt interferes with the child restraint installation, instead of tucking the seat belt behind the child restraint, route the seat belt through the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In general, you will first loosen the adjusters on the lower straps and tether straps so that you can more easily attach the hook or connector to the lower anchorages and tether anchorages. Then tighten all three straps as you push the child restraint rearward and downward into the seat. Transporting Pets Airbags deploying in the front seat could harm your pet.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE infant carrier in a vehicle without rear seats. In an accident, serious injury or death may occur from the deploying passenger air bag. This vehicle is equipped with a child restraint tether anchor located on the floor, behind the front passenger seat. Use this tether anchor to secure only forward facing child restraints equipped with an upper tether strap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE FACING TO THE REAR IN A VEHICLE EQUIPPED WITH THE REAR SEAT DELETE FEATURE (Commercial Vehicles Only). When a convertible seat is properly installed forward facing, the vehicle seat should be adjusted to the rear most position. • Children more than 40 lbs (18 kg) should be secured in the passenger seat in a child restraint or beltpositioning booster seat with the seat adjusted to the rear most position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 5. Route the tether strap beneath the head restraint between the two head restraint posts. Ensure that the child restraint tether strap is centered between the two head restraint posts. Tether To Anchor 3. Follow the child restraint manufacturer’s directions for proper use of connecting the child restraint to the extended tether strap. 4. If necessary, raise the passenger seat head restraint to allow the tether strap to be routed under the head restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. Using the hook attached to the child restraint tether strap, attach the child restraint tether strap to the metal ring on the vehicle tether anchor. 7. Following the child seat manufacturer’s instructions, tighten the child restraint tether strap. 8. If necessary, reposition the seat head restraint. 9. Inspect the tether anchor strap for nicks, abrasions, discoloration, and loose threads.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE While cruising, brief full-throttle acceleration, within the limits of local traffic laws, contributes to a good break-in. Wide open throttle acceleration in low gear can be detrimental and should be avoided. The engine oil installed in the engine at the factory is a high quality energy conserving type lubricant. Oil changes should be consistent with anticipated climate conditions under which vehicle operations will occur.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! If you are required to drive with the deck lid/liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode. Safety Checks You Should Make Inside The Vehicle Seat Belts Inspect the belt system periodically, checking for cuts, frays and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside The Vehicle Tires Examine tires for excessive tread wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect tread and sidewall for cuts or cracks. Check wheel nuts for tightness, and tires (including spare) for proper pressure. Lights Have someone observe the operation of exterior lights while you work the controls.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . .92 ▫ Automatic Dimming Mirror — If Equipped . . . .92 ▫ Driver’s Side Outside Mirror Auto Dimmer — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .93 ▫ Exterior Mirrors Folding Feature . . . . . . . . . . .93 ▫ Outside Mirror — Driver’s Side . . . . . . . . . . . .94 ▫ Outside Mirror — Passenger’s Side . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Things You Should Know About Your UConnect™ System . . . . . . . . . . . . . . . . . . . . 113 䡵 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 ▫ Manual Front & Second Row Seat Adjuster . . . 119 ▫ 8–Way Driver’s Power Seat — If Equipped . . . 120 ▫ 6–Way Passenger’s Power Seat — If Equipped . 120 ▫ Adjustable Head Restraints — If Equipped . . . 121 ▫ Heated Seats — If Equipped . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 䡵 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 ▫ Headlight Low/High Beam Selector Switch . . . 154 ▫ Interior Lights . . . . . . . . . . . . . . . . . . . . . . . 149 ▫ Passing Light . . . . . . . . . . . . . . . . . . . . . . . . 154 ▫ Park Lights . . . . . . . . . . . . . . . . . . . . . . . . . . 149 ▫ Windshield Wipers And Washers . . . . . . . . . . 154 ▫ Headlights . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ To Accelerate For Passing . . . . . . . . . . . . . . . 162 ▫ Erasing HomeLink Buttons . . . . . . . . . . . . . . 177 䡵 Overhead Console — If Equipped . . . . . . . . . . . 163 ▫ Reprogramming a Single HomeLink Button . . . 178 ▫ Courtesy/Reading Lights . . . . . . . . . . . . . . . . 163 ▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 ▫ Sunglass Storage . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 ▫ Rear Cupholders . . . . . . . . . . . . . . . . . . . . . . 184 ▫ Rear Compartment Storage Bins . . . . . . . . . . . 194 䡵 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 ▫ Cargo/Tub Nets . . . . . . . . . . . . . . . . . . . . . . 194 ▫ Front Seat Storage Bin — If Equipped . . . . . . . 186 ▫ Coat Hooks . . . . . . . . . . . . . . . . . . . . . . . . . 194 ▫ Second Row Seat Storage Bins — If Equipped .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view through the rear window. A two point pivot system allows for horizontal and vertical adjustment of the mirror. MANUAL REARVIEW MIRROR Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle). The mirror should be adjusted while set in the day position (toward windshield).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. AUTO MIRROR Driver’s Side Outside Mirror Auto Dimmer — If Equipped This mirror automatically adjusts for annoying headlight glare from vehicles behind you. You can turn this feature on or off by pressing the button at the base of the Rearview Mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirror — Driver’s Side Adjust the outside mirror to center on the adjacent lane of traffic, with a slight overlap of the view obtained on the inside mirror. Outside Mirror — Passenger’s Side Adjust the convex outside mirror so you can just see the side of your vehicle in the portion of the mirror closest to the vehicle. This type of mirror will give a much wider view to the rear, and especially of the lane next to your vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Heated Remote Control Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the Rear Window Defrost. Illuminated Vanity Mirrors — If Equipped An illuminated vanity mirror is on the sun visor. To use the mirror, rotate the sun visor down and swing the mirror cover upward. The lights turn on automatically. Closing the mirror cover turns off the lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE HANDS–FREE COMMUNICATION (UConnect™) — IF EQUIPPED UConnect™ is a voice-activated, hands-free, in- vehicle communications system. UConnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙Call” ѧ “Mike” ѧ”Work⬙ or ⬙Dial” ѧ “248-555-1212⬙). Your cellular phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the UConnect™ system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Headset Profile), you may not be able to use any UConnect™ features. Refer to your cellular service provider or the phone manufacturer for details. The UConnect™ system is fully integrated with the vehicle’s audio system. The volume of the UConnect™ system can either be adjusted from the radio volume control knob, or from the steering wheel radio control (right switch), if so equipped.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Prior to giving a voice command, one must wait for the voice on beep, which follows the ⬙Ready⬙ prompt or another prompt. • For certain operations, compound commands can be used. For example, instead of saying ⬙Setup⬙ and then ⬙Phone Pairing,⬙ the following compound command can be said: ⬙Setup Phone Pairing.⬙ • For each feature explanation in this section, only the combined form of the voice command is given.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pair (Link) UConnect™ System to a Cellular Phone To begin using your UConnect™ system, you must pair your compatible Bluetooth™ enabled cellular phone. NOTE: The UConnect™ system use requires a cellular phone equipped with the Bluetooth ⬙Hands-Free Profile,⬙ version 0.96 or higher. See www.chrysler.com/uconnect for supported phones. To complete the pairing process, you will need to reference your cellular phone owner’s manual.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For identification purposes, you will be prompted to give the UConnect™ system a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name. • You will then be asked to give your cellular phone a priority level between 1 and 7, 1 being the highest priority. You can pair up to seven cellular phones to your UConnect™ system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 Call by Saying a Name Add Names to Your UConnect™ Phonebook • Press the “Phone” button to begin. NOTE: Adding names to phonebook is recommended when vehicle is not in motion. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Call.⬙ • Press the “Phone” button to begin. • System will prompt you to say the name of the person you want call. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Phonebook New Entry.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE After you are finished adding an entry into the phonebook, you will be given the opportunity to add more phone numbers to the current entry or to return to the main menu. • You will then be asked for the name of the phonebook entry that you wish to edit. The UConnect™ system will allow you to enter up to 32 names in the phonebook with each name having up to four associated phone numbers and designations.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Delete Entries in the UConnect™ Phonebook NOTE: Editing phonebook entries is recommended when vehicle is not in motion. • Press the ’Phone’ button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Phonebook Delete.⬙ • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After confirmation, the phonebook entries will be deleted. List All Names in the UConnect™ Phonebook • Press the ’Phone’ button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Phonebook List Names.⬙ • The UConnect™ system will play the names of all the phonebook entries. • To call one of the names in the list, press the ⬙Voice Recognition’ button during the playing of the desired name and say ⬙Call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone. Press the ’Phone’ button to place the current call on hold and answer the incoming call. NOTE: The UConnect™ system compatible phones in market today do not support rejecting an incoming call when another call is in progress.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Conference Call When two calls are in progress (one active and one on hold), press and hold the ’Phone’ button until you hear a double beep indicating that the two calls have been joined into one conference call. Redial Three-Way Calling To initiate three-way calling, press the ’Voice Recognition’ button while a call is in progress and make a second phone call as described under ⬙Making a Second Call while Current Call in Progress.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After ignition key is switched to off, a call can continue on the UConnect™ system for certain duration, after which the call is automatically transferred from the UConnect™ system to the mobile phone. • An active call is automatically transferred to the mobile phone after ignition key is switched to off. UConnect™ System Features Language Selection To change the language that the UConnect™ system is using, • Press the ’Phone’ button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the ⬙Ready⬙ prompt and the following beep, say ⬙Emergency⬙ and the UConnect™ system will instruct the paired cellular phone to call the emergency number. This feature is only supported in the USA. NOTE: The emergency number dialed is based on the Country where the vehicle is purchased (911 for USA and Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Paging To learn how to page, refer to ⬙Working with Automated Systems.⬙ Paging works properly except for pagers of certain companies which time-out a little too soon to work properly with the UConnect™ system. Voice Mail Calling To learn how to access your voice mail, refer to ⬙Working with Automated Systems.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turning Confirmation Prompts On/Off Turning confirmation prompts off will stop the system from confirming your choices (e.g. the UConnect™ system will not repeat a phone number before you dial it). • Press the ’Phone’ button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Setup Confirmations.⬙ The UConnect™ system will play the current confirmation prompt status and you will be given the choice to change it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Mute/Un-mute (Mute off) When you mute the UConnect™ system, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the UConnect™ system: Information Service When using AT&T Wireless Service, dialing to phone number ⬙#121,⬙ you can access voice activated automated system to receive news, weather, stocks, traffic, etc. related information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you would like to connect or disconnect the Bluetooth™ connection between a UConnect™ paired cellular phone and the UConnect™ system, follow the instruction described in your cellular phone user’s manual. List Paired Cellular Phone Names • Press the ’Phone’ button to begin. • After the “Ready” prompt and the following beep, say “Setup Phone pairing”. • When prompted, say ⬙List Phones.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The selected phone will be used for the next phone call. If the selected phone is not available, the UConnect™ system will return to using the highest priority phone present in or near (approximately with in 30 feet) the vehicle. Delete UConnect™ Paired Cellular Phones • Press the ’Phone’ button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Setup Phone Pairing.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, French, and Spanish accents, the system may not always work for some. • When navigating through an automated system, such as, voice mail, or when sending a page, at the end of speaking the digit string, make sure to say ⬙send.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, and • dry weather condition. • Operation from driver seat. • Performance, such as, audio clarity, echo. and loudness to a large degree, rely on the phone and network, and not the UConnect™ system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main menu Return.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using body pressure, move forward and rearward on the seat to be sure the seat adjusters have latched. WARNING! Adjust the seat only while the vehicle is parked. Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. Adjustable Head Restraints — If Equipped Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Pull up or push down on the head restraint so that the upper edge is as high as practical.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE HIGH or No Heat. The switch position as well as an indicator light will show when the LOW or HIGH heat is ON. Heated seat switches Manual Reclining Seats — If Equipped The recliner mechanism control is on the outboard side of the seat. To recline, lean forward slightly, lift the lever, then push back to the desired position and release the lever. Lean forward and lift the lever to return the seatback to its normal position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or fatally injured. Use the recliner only when the vehicle is parked.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Lumbar — If Equipped The lumbar adjustment handle is located inboard under the armrest. To increase the support, rotate the handle down. Stow ’n Go Seating On vehicles equipped with Stow ’n Go seating, the second and third row seats may be folded into the floor for convenient storage. To Fold Second Row Seats 1. Lower the head restraint and raise the armrests on the second row seat. 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 3 Load Floor Handle Seatback Release Lever 3. Pull up on the seatback recliner lever located on the outboard side of the seat and fold the seatback down. To assure the seatback is latched in the folded position, additional downward pressure on the seatback may be required when folding. NOTE: The cupholder must be in the closed position before the seat can be tumbled into the floor.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Pull rearward on the release strap located at the rear of the seat and tumble the seat forward into the storage bin. To Unfold Second Row Seats 1. Slide the storage bin locking mechanism to the ⬙Locked⬙ position and then pull up on the storage bin latch to open the cover. 2. Pull up on the handle to lift the seat out of the storage bin and push the seat rearward to latch the seat anchors. Seat Release Strap 5. Close the storage bin cover.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull up on the seatback recliner lever located on the outboard side of the seat, to return the seatback to its full upright position. 127 To Fold Third Row Seats 1. Lower the head restraint to its full down position. 2. Pull release strap marked “1” located on the rear of the seat to lower the seatback. Seatback Release Lever 4. Close the storage bin cover and adjust the head restraint to the desired position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull release strap marked “2” to release the anchors. 4. Pull release strap marked “3” and tumble the seat rearward into the storage bin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Unfold Third Row Seats 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch. 129 3. Pull release strap marked “3” to return the seatback to its full upright position. 3 Release Strap 3 4. Adjust the head restraint to the desired position. Assist Strap 2. Pull release strap marked “1” to unlock the recliner.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure the seats are fully latched. Tailgate Mode 1. Pull release strap “2”, then pull release strap “3” to rotate the entire seat rearward. Release Straps 2 & 3 2. To restore the seat to its upright position, lift up on the seatback and push forward until the anchors latch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 WARNING! To avoid serious injury or death, never operate the vehicle with occupants in the third row seat, while in the tailgate mode. 3 Easy Access Seating The passenger’s and driver’s side second row seats can be tilted forward for easy access to the third row seat or rear cargo area. To tilt the seat on vehicles equipped with quad seats, pull up on the release handle located on the outboard side of the seat and tilt the seat fully forward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To tilt the seat on vehicles equipped with Stow ’n Go seating, pull forward on the release strap located on the front of the seat between the seat back and seat cushion and tilt the seat fully forward. To return the seat, lower the seat and ensure that it is fully latched. WARNING! In the event of a collision you could be injured if the seat is not fully latched. Middle Quad Fold & Tumble Seat Removal 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull up on the seatback release lever located on the outboard side of the seat and fold the seatback down. If the head restraint contacts the rear of the front seat, move the front seat forward on its tracks. 133 4. Pull up on the release handle and tumble the seat fully forward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Pull the release bar located at the bottom front edge of the seat to disengage the front attachments. To reinstall the seat, remove any obstructions from the floor in front of the seat and ensure the head restraint is in its full downward position. Align the seat in the floor tracks and tilt the seat forward to engage the front floor attachments, then tilt the seat rearward and push down to engage the rear attachments.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 50/50 Fold & Tumble Rear Seat Removal 1. Lower the head restraint and pull up on release lever “1” to fold the seatback down. 135 2. Pull up on release lever “2” and tumble the seat fully forward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull the release strap “3” located at the bottom of the seat to disengage the front attachments. To reinstall the 50/50 rear seat, lower the head restraint to the full down position, tilt the seat forward and engage the front floor attachments, then tilt the seat rearward to engage the rear attachments. Pull the seatback release lever to return the seatback to its full upright position. Ensure that the seatback is fully latched in the upright position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3 – Passenger Bench Seats Release levers are located on the rear leg assemblies, near the floor. To remove the seat, squeeze each release handle and rotate downwards to deploy the wheels. A lock indicator button pops up when the seat is unlocked. The seat assembly can now be removed from the vehicle and moved on its Easy Out威 Rollers. 137 To reinstall the seat, align the seat into the detent positions on the floor.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Plastic Grocery Bag Retainer Retainer hooks which will hold plastic grocery bag handles are built into the seatbacks of all rear seats and some front seats. The floor supports the partial weight of the bagged goods. Rear-Most Bench Seat The seat position can be adjusted fore and aft to any of three positions - normal (rearward), intermediate, and full forward. In this way varying needs for legroom and cargo space behind the seat can be accommodated.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 The release lever is below the seat and is accessible from the front and back of the seat. Rear Seat Descriptions 7 Passenger Model — 2– passenger bucket seats in the second position and 3– passenger bench seat or 50/50 bench seat in the third position. All rear seats are removable. Rear Bench Seating Flexibility The 3– passenger bench seat may be adjusted to any of 3 positions on its tracks while installed in the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Additional Storage— The 2nd and 3rd row seats installed. The 3rd row bench seat is in the full forward position on the tracks and one or both of the rear seatbacks are folded down. 4. Auxiliary Seating— The middle quad seats are removed from the vehicle. The 3– passenger bench seat can be installed in either the second or third row.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 seats. This position is intended only to increase available cargo area without requiring removal of the seats. Do not leave the head restraint stored between the cushions for extended periods of time or inadvertent damage to the seat cover or head restraint may occur. 2. Increased Storage— Increased storage area is provided by folding either or both seatbacks. With one seatback folded forward, rear seating for another occupant is still provided.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the seat is not occupied, the seatback can be folded forward to obtain additional cargo space. To fold the seatback forward, pull the handle labeled “1” located behind the seat on the passenger side. The seatback will latch in the folded position. To assure the seatback is latched in the folded position, additional downward pressure on the seatback may be required when folding. The same lever is used to return the seatback to the upright position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 DRIVER MEMORY SEAT — IF EQUIPPED Once programmed, the memory buttons 1 and 2 on the driver’s door panel can be used to recall the driver’s seat, driver’s outside mirror, adjustable brake and accelerator pedals, and radio station preset settings. Your Remote Keyless Entry transmitters can also be programmed to recall the same positions when the Unlock button is pressed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting Memory Positions and Linking Remote Keyless Entry Transmitter to Memory 5. Turn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). NOTE: Each time the SET (S) button and a numbered button (1 or 2) are pressed, you erase the memory settings for that button and store a new one. 6. Turn the ignition switch to the OFF position and remove the key. 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 10. Insert the ignition key and turn the ignition switch to the ON position. 11. Select ⬙Remote Linked to Memory⬙ in the Electronic Vehicle Information Center (EVIC) and enter ⬙Yes⬙ or select ⬙Use Factory Settings⬙ from the EVIC and enter ⬙Yes⬙. Refer to the Customer Programmable features in the Electronic Vehicle Information Center (EVIC) section for more information. 12.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Disable A Transmitter Linked to Memory 1. Turn the ignition switch to the OFF position and remove the key. 2. Press and release memory button number 1. The system will recall any memory settings stored in position 1. Wait for the system to complete the memory recall before continuing to step 3. 3. Press and release the memory SET (S) button located on the driver’s door. A chime will sound signaling that you are in the memory set mode. 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD To open the hood, two latches must be released. First pull the hood release lever located under the left side of the instrument panel. 147 Next, push to the left the safety catch located under the front edge of the hood, near the center. 3 Hood Safety Catch Hood release Lever Use the hood prop rod to secure the hood in the open position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 12 inches (30 cm) and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. LIGHTS All of the lights, except the hazard warning lights, are controlled by switches to the left of the steering column on the instrument panel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Interior Lights Interior lights are turned on when a door or liftgate is opened, the keyless entry transmitter is activated, or when the dimmer control is moved to the extreme top. Park Lights Turn this switch to the first detent to turn the park lights on. This also turns on all instrument panel lighting. The interior lights will automatically turn off in about 15 minutes if any of the following occur.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dimmer Control With the park lights or headlights on, rotating the dimmer control for the interior lights on the instrument panel upward will increase the brightness of the instrument panel lights. Dome Light Position Rotate the dimmer control completely upward to the second detent (extreme top position) to turn on the interior lights, except the front reading/courtesy lights. The interior lights will remain on when the dimmer control is in this position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped This system automatically turns your headlights ON or OFF based on ambient light levels. To turn the system ON, turn the headlight switch to the extreme counterclockwise position. When the system is ON, the Headlight Time Delay feature is also ON. This means your headlights will stay ON for up to 90 seconds after you turn the ignition switch OFF.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE OFF or AUTO, the lights will turn off automatically until the next cycle of the ignition switch or headlight switch. The battery protection feature will be disabled if the ignition switch is turned to any other position other than LOCK during the 3 minute delay. Headlamp Delay — If Equipped This feature provides the safety of headlight illumination for up to 90 seconds, when leaving your vehicle in an unlighted area.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 MULTIFUNCTION LEVER Turn Signals Move the Multifunction Lever up or down and the arrows on each side of the base instrument cluster or Information Center flash to indicate proper operation of the front and rear turn signal lights. You can signal a lane change by moving the lever partially up or down. 3 If either indicator flashes at a rapid rate, check for a defective outside turn signal light bulb.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlight Low/High Beam Selector Switch Pull the multifunction lever toward the steering wheel to switch the headlights between HIGH and LOW beam. Passing Light You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward the steering wheel. This will cause the headlights to turn on at high beam and remain on until the lever is released.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE wipers will operate for several seconds after the lever is released, and then resume the intermittent interval previously selected. If the end of the lever is depressed while in the OFF position, the wipers will operate for approximately two wipe cycles, then turn OFF. WARNING! Sudden loss of visibility through the windshield could lead to an accident. You might not see other vehicles or other obstacles.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT STEERING COLUMN — IF EQUIPPED To tilt the column, pull the small lever, located behind the turn signal control, toward you and move the wheel up or down, as desired. Release the lever to lock the wheel firmly in place. WARNING! Tilting the steering column while the vehicle is moving is dangerous. Without a stable steering column, you could lose control of the vehicle and have an accident. Adjust the column only while the vehicle is stopped.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 NOTE: • The Traction Control System indicator comes on each time the ignition switch is turned ON. This will occur even if you used the switch to turn the system OFF. • The Traction Control will make buzzing or clicking sounds when in operation. Traction Control Switch To turn the system back ON, press the switch a second time until the TRAC OFF indicator turns OFF.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the driver selects Reverse the system scans for objects behind the vehicle using four sensors located in the rear bumper. Objects can be detected from up to 59 inches (150 cm). A warning display above the rear window provides both visible and audible warnings indicating the range of the object. WARNING! Drivers must be careful when backing up even when using the Rear Park Assist System.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE beeps. The tone will remain constant and both red LEDs are illuminated once the vehicle is within 12 inches (30.5 cm) of the object. The system can be turned on or off through the electronic vehicle information center (EVIC) when the vehicle is in PARK. If the rear park assist system is turned off, a single chime will sound and the EVIC will display the following message “PARK ASSIST DISABLED”, when the vehicle is in reverse.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the button forward to move the pedals forward (toward the front of the vehicle). CAUTION! Press the button rearward to move the pedals rearward (toward the driver). Do not place any article under the adjustable pedals or impede its ability to move as it may cause damage to the pedal controls. Pedal travel may become limited if movement is stopped by an obstruction in the adjustable pedal’s path. • The pedals can be adjusted with the ignition OFF.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidently set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you aren’t using it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE speed memory. Pushing the “ON/OFF” button to the OFF position or turning off the ignition erases the set speed memory. To decrease speed while speed control is set, press and hold the “COAST” button. Release the button when the desired speed is reached, and the new speed will be set. To Resume Speed: To resume a previously set speed, push and release the “RESUME/ACCEL” button. Resume can be used at any speed above 25 mph (40 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 On steep hills a greater speed loss or gain may occur so it may be preferable to drive without speed control. WARNING! 3 Speed Control can be dangerous where the system can’t maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control. An accident could be the result. Don’t use Speed Control in heavy traffic or on roads that are winding, icy, snow-covered, or slippery.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The lights also turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry, the lights will also turn on when the unlock button on the transmitter is pressed. The area around the instrument panel cupholders is also illuminated from a light in the overhead console. This light is turned on when the headlight switch is on and will adjust in brightness when the dimmer control is rotated up or down.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Compass Calibration This compass is self calibrating which eliminates the need to manually set the compass. When the vehicle is new, the compass may appear erratic and the “CAL” symbol will be displayed. After completing three 360° turns in an area free from large metal or metallic objects, the “CAL” symbol will turn off and the compass will function normally.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Compass Variance Compass Variance is the difference between magnetic North and Geographic North. In some areas of the country, the difference between magnetic and geographic North is great enough to cause the compass to give false readings. If this occurs, the compass variance must be set. NOTE: Magnetic materials should be kept away from the overhead console.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To set the variance: Turn the ignition switch ON and set the display to Comp/Temp. On vehicles equipped with a Compass/Mini Trip Computer press the RESET button for approximately 5 seconds. On vehicles equipped with Compass/Temp press and hold the C/T and US/M buttons for 5 seconds. The “VAR” symbol will light and the last variance zone number will be displayed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Step Button Push this button to cycle through all the Compass/Minitrip Computer displays. • US/M Button Press this button to convert the display from U.S. to metric. To Reset The Display Pressing the Reset button once will clear the resettable function currently being displayed. Resettable functions are average fuel economy, trip odometer and elapsed time. Pressing the reset button twice within four seconds will clear all resettable functions.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 • CHECK TPM SYSTEM (Refer to ”Tire Pressure Monitor System” in the “Starting And Operating, Tire Section”) Customer Programmable Features — If Equipped Press the “MENU” button until one of the display choices following appears: • MEMORY SEAT DISABLED (Not in Park) — If Equipped Language When in this display you may select one of five languages for all display nomenclature, including the trip computer functions.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE US or Metric Pressing the “STEP” button when in this display selects US or Metric. The overhead console and climate control displays will be in the selected units. Service Interval When this feature is selected a service interval between 2,000 miles (3 200 km) and 6,000 miles (9 600 km) in 500 mile (800 km) increments may be selected.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Remote Unlock Driver’s Door 1st When this feature is selected only the driver’s door will unlock on the first press of the remote keyless entry unlock button and require a second press to unlock the remaining locked doors and liftgate. When “REMOTE UNLOCK ALL DOORS” is selected all of the doors and the liftgate will unlock at the first press of the remote keyless entry unlock button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Flash Lights On Lock/Unlock? When this feature is selected, the front and rear turn signals will flash when the doors are locked or unlocked using the remote keyless entry transmitter. This feature may be selected with or without the sound horn on lock feature selected. Pressing the “STEP” button when in this display will select “Yes” or “No.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Accessory Delay When this feature is selected, accessory power will be supplied for up to 45 seconds for the power windows, radio, power vent windows, power outlets, and removable center console, when the ignition switch is turned off or until the key is removed and either front door is opened.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicle exhaust contains carbon monoxide, a dangerous gas. Do not run the vehicle’s exhaust while training the transceiver. Exhaust gas can cause serious injury or death. WARNING! Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people or pets are in the path of the door or gate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 3. Simultaneously press and hold both the HomeLink button that you want to train and the hand-held transmitter buttons. Do not release the buttons until step 4 has been completed. NOTE: Some gate operators and garage door openers may require you to replace this Programming Step 3 with procedures noted in the ⬙Gate Operator/Canadian Programming⬙ section. HomeLink Buttons 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: To program the remaining two HomeLink buttons, begin with ⬙Programming⬙ step two. Do not repeat step one. If the indicator light blinks rapidly for two seconds and then turns to a constant light, continue with ⴖProgrammingⴖ steps 6 - 8 to complete the programming of a rolling code equipped device (most commonly a garage door opener). 8. Return to the vehicle and firmly press, hold for two seconds and release the programmed HomeLink button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Similar to this Canadian law, some U.S. gate operators are designed to ⬙time-out⬙ in the same manner. If you live in Canada or you are having difficulties programming a gate operator by using the ⬙Programming⬙ procedures (regardless of where you live), replace ⴖProgramming HomeLinkⴖ step 3 with the following: NOTE: If programming a garage door opener or gate operator, it is advised to unplug the device during the ⬙cycling⬙ process to prevent possible overheating.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE seconds. HomeLink is now in the train (or learning) mode and can be programmed at any time beginning with ⬙Programming⬙ - step 2. Reprogramming a Single HomeLink Button To program a device to HomeLink using a HomeLink button previously trained, follow these steps: 1. Press and hold the desired HomeLink button. Do NOT release the button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The power sunroof control is located between the sun visors on the overhead console. Power Sunroof Controls Press and hold the switch rearward to fully open the sunroof. The sunroof can be stopped at any position between closed and full open. Momentarily pressing the 179 switch rearward will activate the Express Open Feature, causing the sunroof to open automatically.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To close the sunroof, hold the switch in the forward position. Again, any release of the switch will stop the movement and the sunroof will remain in a partial open condition until the switch is pushed forward again. The sunshade can be opened manually. It will also open as the sunroof opens. The sunshade cannot be closed if the sunroof is open. WARNING! Never leave children in a vehicle, with the keys in the ignition switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 the rear windows open, open the front and rear windows together to minimize the buffeting. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting or open any window. Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. ELECTRICAL POWER OUTLETS — IF EQUIPPED To the left of the instrument panel cup holder are two 12 volt power outlets.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The lower outlet is protected by an automatic reset circuit breaker. The automatic circuit breaker restores power when the overload is removed. The circuit breaker also supplies power to the outlet in the removable floor console, when in the front position. Refer to section 3 “Removable Floor Console” in this manual.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONVENIENCE TRAY DRAWER AND CUP HOLDERS Instrument Panel Cup Holders The instrument panel cupholders are located in a pull out drawer just below the climate controls. 183 When the drawer is pulled out firmly, the arms of the cupholders will spring out. Place the container to be held into one of the cupholders and then push the arm toward the container until the container is held stable.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Convenience Tray And Optional Smoker’s Package Kit Located between the instrument panel cupholders is a convenience tray that has been designed to hold miscellaneous small items. NOTE: The convenience tray should never be used for ashes without the optional ash receiver in place. Permanent burn marks may result. With the optional dealer installed Smoker’s package, a removable ash receiver is inserted into the convenience tray location.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 • The quad seat cupholders are designed to break away if stepped on. To return the cupholder to its normal position, simply push the cupholder up to snap it into place. • The floor mat must be in position for optimum cupholder operation. There are also two cupholders and a flat tray on the seat back of the quad seats. These can be used when the seat back is folded forward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE Front Seat Storage Bin — If Equipped The storage bin is located under the front passenger’s seat. If equipped with a lock, it can be locked with the ignition key. Front Seat Storage Bin Second Row Seat Storage bins — If Equipped The Seat Storage Bins are located on the floor in front of the second row seats, the area below the covers can be used for storage when the second row seat is in the upright position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pull up on the storage bin latch to open the cover. Slide the storage bin locking mechanism to the ⬙Unlocked⬙ position to allow greater access to the storage bin. WARNING! In an accident, serious injury could result if the seat storage bin covers are not properly latched. Do not drive the vehicle with the storage bin cover open. Keep the storage bin cover closed and latched while the vehicle is in motion.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Remove Storage Bins 1. Support the bin with one hand and pull the latch handles out. 2. Twist the latch handles a 1⁄4 turn and pull outward to disengage the bin from the rail. 3. Remove the storage bin. NOTE: Make sure the latch handle pops out before removing the storage bin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To reinstall the storage bins, place the bin in the desired location on the overhead rail, push firmly upward on the bin with one hand, while pushing in on the latch handle, twist a 1⁄4 turn to attach the bin to the rail. Push the latch handle down to lock the storage bin in place. To remove the console use the following procedure: 1. Open the console lid and remove the storage tray. 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Remove the floor console. To reinstall the console, open the console lid and remove the storage tray. Pull up on the release handle and slide the console forward to engage the front of the console into the floor tray. Pivot the floor console down until it is seated on the floor tray and release the handle. Pull up on the console to be sure it is firmly attached.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 3 Removable Floor Console To remove the console use the following procedure: 1. Open the rear lid and remove the storage tray. 2. Pull up on the release handle located inside the floor console to disengage the floor console, reinstall the storage tray and close the rear lid. Release Handle 3. Using the front and rear grab handles, slide the console rearward to disengage the front of the console and lift up to remove the console from the floor. 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To reinstall the console, remove the rubber mat and relocate to the alternate floor tray, slide the console forward to engage the front of the console into the floor tray. Rapidly push down on the rear of the console with enough force to engage the latch, you should hear the latch “snap” into place. Pull up on the console to be sure it is firmly attached. Cell Phone Holder 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Plug in the power cord for the cellular phone into the outlet located in the bottom of the forward console bin and reinstall the cell phone holder. 3. Place the cell phone into the holder. 193 CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e. cellular phones, etc.).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Compartment Storage Bins Your vehicle may be equipped with open storage bins located in each rear trim panel. Cargo/Tub Nets Two cargo/tub nets are available on vehicles equipped with Fold-in-Floor Seating. The cargo nets fit in the second row storage bin and the third row tub. The nets are supported by hooks located in these areas. Refer to instructions provided in the net kit.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 3 Loading Limit Roof Rack ROOF LUGGAGE RACK — IF EQUIPPED The crossbars and siderails are designed to carry the weight on vehicles equipped with a luggage rack. The load must not exceed 68 kg (150 lbs), and should be uniformly distributed over the luggage rack crossbars. Distribute cargo weight evenly on the roof rack crossbars. The roof rack does not increase the total load carrying capacity of the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To move the cross bars, loosen the thumb screws located at the upper edge of each cross bar approximately six turns, then move the cross bar to the desired position, keeping the crossbars parallel to the rack frame. Once the cross bar is in place, retighten the thumb screws to lock the cross bar into position. Attempt to move the crossbar again to ensure that it has properly locked into position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack. LOAD LEVELING SYSTEM The automatic load leveling system will provide a level riding vehicle under most passenger and cargo loading conditions.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instruments And Controls . . . . . . . . . . . . . . . . . 205 ▫ Two Types Of Signals . . . . . . . . . . . . . . . . . . 218 䡵 Base Instrument Cluster . . . . . . . . . . . . . . . . . . 206 ▫ Electrical Disturbances . . . . . . . . . . . . . . . . . . 218 䡵 Instrument Cluster With Tach . . . . . . . . . . . . . . 207 ▫ AM Reception . . . . . . . . . . . . . . . . . . . . . . . 218 䡵 Premium Instrument Cluster . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 ▫ Rewind (RW) . . . . . . . . . . . . . . . . . . . . . . . . 224 ▫ Radio Data System (RDS) . . . . . . . . . . . . . . . 220 ▫ Tape Eject . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 ▫ PTY (Program Type) Button . . . . . . . . . . . . . . 220 ▫ Scan Button . . . . . . . . . . . . . . . . . . . . . . . . . 224 ▫ Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 ▫ Tape CD Button . . . . . . . . . . . . . . . . . . . . . . 227 ▫ Time Button . . . . . . . . . . . . . . . . . . . . . . . . . 228 ▫ Scan Button . . . . . . . . . . . . . . . . . . . . . . . . . 228 ▫ CD Changer Control Capability — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 228 䡵 Sales Code Rev AM & FM Stereo Radio With CD Player And CD/DVD Changer Controls . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL ▫ CD Player Operation . . . . . . . . . . . . . . . . . . . 259 ▫ Prog Up/Down Buttons (10, 11) . . . . . . . . . . . 267 ▫ CD Changer Control Capability — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 261 ▫ Slow Button (12) . . . . . . . . . . . . . . . . . . . . . . 267 䡵 Sales Code RB1—AM/FM Stereo Radio With DVD/GPS Navigation System . . . . . . . . . . . . . . 263 䡵 Remote Control Operating Instructions . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Operating Instructions — Video Games/Camcorders . . . . . . . . . . . . . . . . . . . 272 䡵 Satellite Radio — If Equipped . . . . . . . . . . . . . . 272 ▫ System Activation . . . . . . . . . . . . . . . . . . . . . 272 ▫ Electronic Serial Number/Sirius Identification Number (ENS/SID) . . . . . . . . . . . . . . . . . . . . 273 ▫ Selecting Satellite Mode In RBB, Rev And RBK Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Front Mode Control . . . . . . . . . . . . . . . . . . . 281 ▫ Manual Air Conditioning Operation . . . . . . . . 285 ▫ Manual Rear Zone Climate Control — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 288 ▫ Automatic Temperature Control — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 290 䡵 Rear Window Features . . . . . . . . . . . . . . . . . . . 302 ▫ Intermittent Rear Wiper Operation — Manual Temperature Control Only . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 205 INSTRUMENTS AND CONTROLS 4
UNDERSTANDING YOUR INSTRUMENT PANEL BASE INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL 207 INSTRUMENT CLUSTER WITH TACH 4
UNDERSTANDING YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. Tire Pressure Monitoring Telltale Lamp — If Equipped Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label.
UNDERSTANDING YOUR INSTRUMENT PANEL 4. Turn Signal Indicators The arrow will flash with the exterior turn signal when the turn signal lever is operated. If the vehicle electronics sense that the vehicle has traveled about one mile with the turn signals on, a chime will sound to alert you to turn the signals off. If either indicator flashes at a rapid rate, check for a defective outside light bulb. 5. Liftgate Ajar This light turns on if the liftgate is not completely closed. 6.
UNDERSTANDING YOUR INSTRUMENT PANEL If brake failure is indicated, immediate repair is necessary. WARNING! 211 the ON position. The light should illuminate for approximately four seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer. Driving a vehicle with the brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle.
UNDERSTANDING YOUR INSTRUMENT PANEL 10. Anti-Lock Light This light monitors the Anti-Lock Brake System. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. 11. Tachometer — If Equipped The red segments indicate the maximum permissible engine revolutions-per-minute (r.p.m. x 1000) for each gear range. Before reaching the red area, ease up on the accelerator.
UNDERSTANDING YOUR INSTRUMENT PANEL continuously. Refer to ⬙Enhanced Driver Seat Belt Reminder System (BeltAlert™)⬙ in the Occupant Restraints section for more information. 14. Engine Temperature Warning Light This light warns of an overheated engine condition. If the engine is critically hot, a continuous chime will sound for 4 minutes. After the chime turns off, the engine will still be critically hot until the light turns off. 15.
UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! NOTE: You must apply the brakes before shifting from Park. A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph. 19. Oil Pressure Warning Light This light shows low engine oil pressure.
UNDERSTANDING YOUR INSTRUMENT PANEL 21. Malfunction Indicator Light This light is part of an onboard diagnostic system called OBD that monitors engine and automatic transmission control systems. The light will illuminate when the key is in the ON position before engine start. If the bulb does not come when turning the key from OFF to ON, have the condition checked promptly. Certain conditions such as a loose or missing gas cap, poor fuel quality, etc. may illuminate the light after engine start.
UNDERSTANDING YOUR INSTRUMENT PANEL This is to prevent overheating of the brake system and is a normal condition. The system will remain disabled for about 4 minutes until the brakes have cooled. The system will automatically reactivate and turn off the TRAC and the OFF indicators. If your vehicle becomes stuck in mud, ice, or snow, turn the Traction Control System OFF before attempting to “rock” the vehicle free. 23.
UNDERSTANDING YOUR INSTRUMENT PANEL 25. Trip Odometer Button Press this button to change the display from odometer to trip odometer. The word TRIP will appear when in the trip odometer mode. Push in and hold the button for two seconds to reset the trip odometer to 0 miles or kilometers. The odometer must be in trip mode to reset. ELECTRONIC DIGITAL CLOCK The clock and radio each use the display panel built into the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL you understand and save you concern about these “apparent” malfunctions, you must understand a point or two about the transmission and reception of radio signals. AM Reception AM sound is based on wave amplitude, so AM reception can be disrupted by such things as lightning, power lines and neon signs. Two Types of Signals There are two basic types of radio signals...
UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RAZ—AM/ FM STEREO RADIO WITH CASSETTE TAPE PLAYER, CD PLAYER AND CD CHANGER CONTROLS NOTE: The radio sales code is located on the lower left side of your radio faceplate. RAZ Radio 219 Operating Instructions — Radio NOTE: Power to operate the radio is controlled by the ignition switch. It must be in the ON or ACC position to operate the radio. Power Switch, Volume Control Press the ON/VOL control to turn the radio on.
UNDERSTANDING YOUR INSTRUMENT PANEL Tuning Press the TUNE control up or down to increase or decrease the frequency. If you press and hold the button, the radio will continue to tune until you release the button. The frequency will be displayed and continuously updated while the button is pressed. Radio Data System (RDS) The Radio Data System allows radio broadcasting stations to send data signals on a subcarrier frequency which is added to the stereo signal.
UNDERSTANDING YOUR INSTRUMENT PANEL Program Type News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather Radio Display News Nostalga Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R&B Sports Talk Top 40 Weather 221 By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency station with the same selected PTY name.
UNDERSTANDING YOUR INSTRUMENT PANEL Balance The Balance control adjusts the left-to-right speaker balance. Push in the button and it will pop out. Adjust the balance and push the button back in. The balance will be displayed and continuously updated while the button is turned. Fade The Fade control provides for balance between the front and rear speakers. Push in the button and it will pop out. Adjust the balance and push the button back in.
UNDERSTANDING YOUR INSTRUMENT PANEL To Set The Radio Push-button Memory When you are receiving a station that you wish to commit to push-button memory, press the SET button. SET 1 will show in the display window. Select the push-button you wish to lock onto this station and press and release that button. If a station is not selected within 5 seconds after pressing the SET button, the station will continue to play but will not be locked into push-button memory.
UNDERSTANDING YOUR INSTRUMENT PANEL Press the SEEK button up or down to move the track number to skip forward or backward 1 to 6 selections. Press the SEEK button once to move 1 selection, twice to move 2 selections, etc. Fast Forward (FF) Press the FF button up momentarily to advance the tape in the direction that it is playing. The tape will advance until the button is pressed again or the end of the tape is reached. At the end of the tape, the tape will play in the opposite direction.
UNDERSTANDING YOUR INSTRUMENT PANEL Pinch Roller Release If ignition power or the radio ON/OFF switch are turned off, the pinch roller will automatically retract to protect the tape from any damage. When power is restored to the tape player, the pinch roller will automatically reengage and the tape will resume play. Noise Reduction The Dolby Noise Reduction System* is on whenever the tape player is on, but may be switched off.
UNDERSTANDING YOUR INSTRUMENT PANEL If the volume control is ON, the unit will switch from radio to CD mode and begin to play. The display will show the track number and index time in minutes and seconds. Play will begin at the start of track one. NOTE: • You may eject a disc with the radio OFF. The ignition switch must be in the ON or ACC position to insert a disc with the radio OFF.
UNDERSTANDING YOUR INSTRUMENT PANEL FF/TUNE/RW Press FF (Fast Forward) and the CD player will begin to fast forward until FF is released. The RW ( Reverse) button works in a similar manner. Program Button 4 (Random Play) Press this button while the CD is playing to activate Random Play. This feature plays the tracks on the selected disc in random order to provide an interesting change of pace. Press the SEEK button to move to the next randomly selected track.
UNDERSTANDING YOUR INSTRUMENT PANEL Time Button Press this button to change the display from elapsed CD playing time to time of day. Disc Down/Program Button 5 Press the DISC down (button 5) button to play the previous disc. Scan Button Press this button to play the first 10 seconds of each track. To stop the scan function, press the button a second time. Seek Button Press the SEEK up or down to select another track on the same disc. A SEEK symbol will appear on the display.
UNDERSTANDING YOUR INSTRUMENT PANEL CD Diagnostic Indicators When driving over a very rough road, the CD player may skip momentarily. Skipping will not damage the disc or the player, and play will resume automatically. As a safeguard and to protect your CD player, one of the following warning symbols may appear on your display. SALES CODE REV AM & FM STEREO RADIO WITH CD PLAYER AND CD/DVD CHANGER CONTROLS NOTE: The radio sales code is located on the lower left side of your radio faceplate.
UNDERSTANDING YOUR INSTRUMENT PANEL Radio Operation Power/Volume Control Press the ON/VOL control to turn the radio on. Turn the volume control clockwise to increase the volume. NOTE: Power to operate the radio is supplied through the ignition switch. It must be in the ON or ACC position to operate the radio. PTY (Program Type) Pressing the INFO button once while in FM mode will turn on the PTY mode for 5 seconds. If no action is taken during the 5 second time out, the PTY icon will turn off.
UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather Radio Display Rel Musc Rel Talk Rock Soft Soft Rck Soft R&B Sports Talk Top 40 Weather By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency station with the same selected PTY name. The PTY function only operates when in the FM and Satellite (if equipped) modes.
UNDERSTANDING YOUR INSTRUMENT PANEL top of the button to seek up and the bottom to seek down. The radio will remain tuned to the new station until you make another selection. Holding the button in will bypass stations without stopping until you release it. Tuning Press the TUNE control up or down to increase or decrease the frequency. If you press and hold the button, the radio will continue to tune until you release the button.
UNDERSTANDING YOUR INSTRUMENT PANEL both AM and FM. This allows a total of 10 AM and 10 FM stations to be locked into memory. You can recall the stations stored in SET 2 memory by pressing the pushbutton twice. To Change From Clock To Radio Mode Press the TIME button to change the display between radio frequency and time. General Information This radio complies with Part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following conditions: 1.
UNDERSTANDING YOUR INSTRUMENT PANEL Inserting The Compact Disc CAUTION! This CD player will accept only 4–3/4 inch (12cm) discs only. The use of other sized discs may damage the CD player mechanism. You may either insert or eject a disc with the radio OFF. Seek Press the top of the SEEK button for the next selection on the CD.
UNDERSTANDING YOUR INSTRUMENT PANEL RND — Random Play Press the RND button while the CD is playing to activate Random Play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the SEEK button to move to the next randomly selected track. Press TUNE FF to fast forward through the tracks. Press the FF button a second time to stop the fast forward feature.
UNDERSTANDING YOUR INSTRUMENT PANEL When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file normally. UDF and Apple HFS formats are not supported. The radio uses the following limits for file systems: • Maximum number of directory levels: 15 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙.
UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 24, 22.05, 16 Bit rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 ID3 Tag information for artist, song title and album title are supported for version 1 ID3 tags. ID3 version 2 is not supported by the radios. Playlist files are not supported. MP3 Pro files are not supported.
UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - (CD Mode For MP3 Audio Play) SEEK Button (CD Mode For MP3 Play) Pressing the SEEK + button plays the next MP3 File. Pressing the SEEK ⫺ button plays the beginning of the MP3 file. Pressing the button within the first ten seconds plays the previous file. INFO Button (CD Mode For MP3 Play) Press and INFO button while playing MP3 disc.
UNDERSTANDING YOUR INSTRUMENT PANEL 239 Operating Instructions - Satellite Radio Mode (If Equipped) Refer to the Satellite Radio section of the Owner’s Manual. Operating Instructions - Video Entertainment System (VES威) (If Equipped) Refer to 6 Disc CD/DVD Changer Manual. 4 SALES CODE RBP—AM & FM STEREO RADIO WITH CASSETTE TAPE PLAYER, CD PLAYER, AND OPTIONAL CD/DVD CHANGER CONTROLS NOTE: The radio sales code is located on the lower left side of your radio faceplate.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Power to operate the radio is supplied through the ignition switch. It must be in the ON or ACC position to operate the radio. PTY (Program Type) Button Pressing this button once will turn on the PTY mode for 5 seconds. If no action is taken during the 5 second time out the PTY icon will turn off. Pressing the PTY button within 5 seconds will allow the program format type to be selected. Many radio stations do not currently broadcast PTY information.
UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Sports Talk Top 40 Weather Radio Display Sports Talk Top 40 Weather By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency station with the same selected PTY name. The PTY function only operates when in the FM and Satellite (if equipped) modes. The radio display will flash “SEEK” and the selected PTY program type when searching for the next PTY station.
UNDERSTANDING YOUR INSTRUMENT PANEL Tune Press the TUNE control up or down to increase or decrease the frequency. If you press and hold the button, the radio will continue to tune until you release the button. The frequency will be displayed and continuously updated while the button is pressed. Balance — BAL The Balance control adjusts the left-to-right speaker balance. Press the BAL button in and it will pop out. Adjust the balance and push the button back in.
UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each push-button by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 10 AM and 10 FM stations to be locked into push-button memory. The stations stored in SET 2 memory can be selected by pressing the push-button twice.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: When subjected to extremely cold temperatures, the tape mechanism may require a few minutes to warm up for proper operation. Sometimes poor playback may be experienced due to a defective cassette tape. Clean and demagnetize the tape heads at least twice a year. Tape Side — ⵜ⌬/PTY Pressing the ⵜ⌬ button during tape mode will cause the other side of the tape to be played. The display will confirm the selected tape play direction. The time is always displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL pressed again or until the beginning of the tape is reached. At the beginning of the tape, the tape will play in the opposite direction. EJT Tape Press the EJT TAPE button and the cassette will disengage and eject from the radio. Metal Tape Selection (70µs) If a standard 70 µ (metal) tape is inserted into the player, the player will automatically select the correct equalization.
UNDERSTANDING YOUR INSTRUMENT PANEL Inserting The Compact Disc You may either insert or eject a disc with the radio OFF. If you insert a disc with the ignition ON and the radio off, the display will show CD and the time of day will be displayed. If the power is on, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number and index time in minutes and seconds. Play will begin at the start of track one.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 Random Play — RND/Program Button 4 Press the RND (button 4) button while the CD is playing to activate Random Play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace. five seconds. The current program type and channel number will then be displayed for five seconds. The current channel name and number will then be displayed until an action occurs.
UNDERSTANDING YOUR INSTRUMENT PANEL Random Play — RND/Program Button 4 Press the RND (button 4) button while the CD is playing to activate Random Play. This feature plays the selections on the currently playing compact disc in random order to provide an interesting change of pace. Press the top of the SEEK button to move to the next randomly selected track. Press the RND (button 4) button a second time to stop Random Play. FF/RW — TUNE Press and hold the FF button for fast forward.
UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RBQ—AM/FM STEREO RADIO WITH 6 - DISC CD CHANGER NOTE: The radio sales code is located on the lower left side of your radio faceplate. 249 Radio Operation Power/Volume Control Press the PWR/VOL control to turn the radio on. Turn the volume control clockwise to increase the volume. NOTE: Power to operate the radio is controlled by the ignition switch. It must be in the ON or ACC position to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL channel number will then be displayed for five seconds. The current channel name and number will then be displayed until an action occurs. CD’s may remain in the player while in the Satellite Radio mode. Seek Press and release the SEEK button to search for the next station in either the AM or FM mode. Press the top of the button to seek up and the bottom to seek down. The radio will remain tuned to the new station until you make another selection.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 Audio The audio button controls the BASS, TREBLE, BALANCE, and FADE. Time Button Press the TIME button to change the display between radio frequency and time. Press the AUDIO button and BASS will be displayed. Press the SEEK + or SEEK – to increase or decrease the Bass tones. General Information This radio complies with Part 15 of FCC rules and with RSS-210 of Industry Canada.
UNDERSTANDING YOUR INSTRUMENT PANEL CD Player Operation NOTE: The ignition switch must be in the ON or ACC position and the Power / Volume control pushed ON before the CD player will operate. Inserting The Compact Disc CAUTION! This CD player will accept 4 3⁄4 inch (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. You may either insert or eject a disc with the radio OFF.
UNDERSTANDING YOUR INSTRUMENT PANEL Radio display will show “ejecting” when it is being ejected. If you have ejected a disc and have not removed it within 15 seconds, it will be reloaded. If the CD is not removed, the radio will continue to play the non-removed CD. If the CD is removed and there are other CD’s in the radio, the radio will play the next CD. If the CD is removed and there are no other CD’s in the radio, the radio will return to the last selected AM or FM mode.
UNDERSTANDING YOUR INSTRUMENT PANEL PTY (Program Type) Button Pressing this button once will turn on the PTY mode for 5 seconds. If no action is taken during the 5 second time out the PTY icon will turn off. Pressing the PTY button repeatedly within 5 seconds will allow the program format type to be selected. Many radio stations do not currently broadcast PTY information.
UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Talk Top 40 Weather Radio Display Talk Top 40 Weather By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency station with the same selected PTY name. The PTY function only operates when in the FM mode. The radio display will flash “SEEK” and the selected PTY program type when searching for the next PTY station.
UNDERSTANDING YOUR INSTRUMENT PANEL A CD HOT symbol indicates the player is too hot. CD HOT will pause the operation. Play can be resumed when the operating temperature is corrected or another MODE is selected. CD ERROR will appear on the display if the laser is unable to read the Disc data for the following reasons: SALES CODE RBK—AM/ FM STEREO RADIO WITH CD PLAYER AND CD CHANGER CONTROLS NOTE: The radio sales code is located on the lower left side of your radio faceplate.
UNDERSTANDING YOUR INSTRUMENT PANEL Radio Operation Power/Volume Control Press the ON/VOL control to turn the radio on. Turn the volume control clockwise to increase the volume. NOTE: Power to operate the radio is supplied through the ignition switch. It must be in the ON or ACC position to operate the radio. Seek Press and release the SEEK button to search for the next station in either the AM or FM mode. Press the top of the button to seek up or the bottom to seek down.
UNDERSTANDING YOUR INSTRUMENT PANEL stations stored in SET 2 memory can be selected by pressing the push-button twice. Every time a preset button is used a corresponding button number will be displayed. Audio The audio button controls the BASS, TREBLE, BALANCE, and FADE. Press the AUDIO button a fourth time and FADE will be displayed. Press the SEEK + or SEEK – to adjust the sound level between the front and rear speakers.
UNDERSTANDING YOUR INSTRUMENT PANEL General Information This radio complies with Part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following conditions: 1. This device may not cause harmful interference, 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE: Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment.
UNDERSTANDING YOUR INSTRUMENT PANEL Seek Press the top of the SEEK button for the next selection on the CD. Press the bottom of the button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection. EJT — Eject Press the EJT button and the disc will unload and move to the entrance for easy removal. The unit will switch to the radio mode.
UNDERSTANDING YOUR INSTRUMENT PANEL 261 Satellite Radio (if equipped). When Satellite Radio (if equipped) is selected “SAT” will appear in your radio display. Disc Up/Program Button 1 Press the DISC up (button 1) button to play the next available disc. A CD or tape may remain in the player while in the Satellite mode. Disc Down/Program Button 5 Press the DISC down (button 5) button to play the previous disc. Time Press the TIME button to change the display from elapsed CD playing time to time of day.
UNDERSTANDING YOUR INSTRUMENT PANEL Random Play (RND) Press the Random button to play the tracks on the selected disc in random order for an interesting change of pace. Random can be cancelled by pressing the button a second time or by ejecting the CD from the changer. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to the Satellite Radio section of the Owner’s Manual. CD Diagnostic Indicators When driving over a very rough road, the CD player may skip momentarily.
UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RB1—AM/FM STEREO RADIO WITH DVD/GPS NAVIGATION SYSTEM 263 The navigation system provides maps, turn identification, selection menus and instructions for selecting a variety of destinations and routes. Refer to your “Navigation User’s Manual” for detailed operating instructions. NOTE: If your vehicle is not equipped with the CD Changer option, you will not be able to use the Navigation system and the CD Player simultaneously.
UNDERSTANDING YOUR INSTRUMENT PANEL Remote Control Operating Instructions NOTE: Aim the remote control at the radio located on the center of the instrument panel and press the desired button. Direct sunlight or objects blocking the line of sight may affect the function of the remote control.
UNDERSTANDING YOUR INSTRUMENT PANEL Remote Control Buttons 1. Headphone Transmitter 2. Menu Up/Next Track/Chapter 3. Menu Left/Fast Rewind 4. Return 5. Setup 6. Pause/Play 7. Mute 8. Display 9. Mode 10. Program Down - Previous Disc 11. Program Up - Next Disc 12. Slow 13. Stop 14. Menu 15. Menu Down/Previous Track/Chapter 16. Menu Right/Fast Forward 265 Remote Control Buttons 17. Enter 18.
UNDERSTANDING YOUR INSTRUMENT PANEL RTN Button (4) This button only functions in CD/DVD mode. Press this button to return to the previous menu when in the disc menu mode. PAUSE/PLAY Button (6) This button only functions in DVD video mode. Press this button once to pause the video, press a second time to play the video. SETUP Button (5) This button only functions in CD/DVD mode. Press the button after pressing the STOP button to access the set up menu.
UNDERSTANDING YOUR INSTRUMENT PANEL PROG UP/DOWN Buttons (10, 11) PROG UP selects the next disc loaded in the changer. PROG DOWN selects the previous disc loaded in the changer. SLOW Button (12) This button only functions in DVD video mode. Press this button to advance the video. If the DVD is paused, pressing this button will advance the video frame by frame. STOP Button (13) This button only functions in DVD video mode. Press this button to stop the DVD.
UNDERSTANDING YOUR INSTRUMENT PANEL ENTER Button (17) This button only functions in DVD video mode. Use the ENTER button to enter selections from the menu screens. Use the arrow buttons to toggle through the menu screen options. Operating Instructions — Video Screen Push up on the release button to lower the video screen. Light Button (18) Pressing this button illuminates the buttons on the remote control.
UNDERSTANDING YOUR INSTRUMENT PANEL 269 1. Screen Width Button Changes the width of the screen picture. 2. Enter Button This button will enter the selection from the on-screen menu. 4 3. Brightness Button Changes the brightness of the screen picture.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Headphones Power Button Pressing the power button will turn the headphones ON/OFF. An indicator light will illuminate on the headphone earpiece to indicate the headphones are ON. NOTE: • The headphones will turn off automatically in approximately 3 minutes if they lose the signal form the system or when the radio or rear audio/video system is turned off.
UNDERSTANDING YOUR INSTRUMENT PANEL 271 harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. If you do not hear sound coming from the headphones, check for the following conditions: 1. Rear Seat Audio/Video System and headphones are on. Press the headphone transmitter button (1) on the remote control and the power button on the headphones.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — MP3 Player, Portable Walkman An MP3 player can be connected to the audio system. Connect the cables to the RCA jacks located on the front of the CD/DVD changer. NOTE: Follow the manufactures instructions for the correct colors when connecting the RCA cables. Operating Instructions — Video Games/Camcorders A video game unit or camcorder can be connected to the rear audio/video system.
UNDERSTANDING YOUR INSTRUMENT PANEL 2. Credit card information. 3. Your Vehicle Identification Number. Electronic Serial Number/Sirius Identification Number (ENS/SID) The Electronic Serial Number/Sirius Identification Number is needed to activate your Sirius Satellite Radio system.
UNDERSTANDING YOUR INSTRUMENT PANEL Selecting Satellite Mode in RBP, RBU, RAZ, RB1 and RBQ Radios Press the MODE button repeatedly until the word ⬙SIRIUS⬙ appears in the display. These radios will also display the following: • After 3 seconds, the current channel name and channel number will be displayed for 5 seconds. • The current program type and channel number will then be displayed for 5 seconds. • The current channel number will then be displayed until an action occurs.
UNDERSTANDING YOUR INSTRUMENT PANEL Storing and Selecting Pre-Set Channels In addition to the 10 AM and 10 FM pre-set stations, you may also commit 10 satellite stations to push button memory. These satellite channel pre-set stations will not erase any AM or FM pre-set memory stations. Follow the memory pre-set procedures that apply to your radio. Using the PTY (Program Type) Button (If Equipped) Follow the PTY button instructions that apply to your radio.
UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality Satellite reception may be interrupted due to one of the following reasons. • The vehicle is parked in an underground parking structure or under a physical obstacle. REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel at the 3 and 9 O’clock positions. • Dense tree coverage may interrupt reception in the form of short audio mutes.
UNDERSTANDING YOUR INSTRUMENT PANEL The right hand rocker switch has a push button in the center and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume and pressing the bottom of the rocker switch will decrease the volume. Pressing the center button changes the operation of the radio from AM to FM to Tape or CD mode depending on which radio is in the vehicle. The left hand rocker switch has a push button in the center.
UNDERSTANDING YOUR INSTRUMENT PANEL CD Player Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track or to the beginning of the previous track if it is within one second after the current track begins to play. If you press the switch up or down twice it plays the second track, three times, it will play the third, etc. The button in the center of the left hand switch has no function in this mode.
UNDERSTANDING YOUR INSTRUMENT PANEL turned all the way down. To prevent this, you should periodically clean the head with a commercially available WET cleaning cassette. As preventive maintenance, clean the head about every 30 hours of use. If you wait until the head becomes very dirty (noticeably poor sound), it may not be possible to remove all deposits with a simple WET cleaning cassette. CD/DVD DISC MAINTENANCE To keep the CD/DVD discs in good condition, take the following precautions: 1.
UNDERSTANDING YOUR INSTRUMENT PANEL CLIMATE CONTROLS The Air Conditioning and Heating System is designed to make you comfortable in all types of weather. Manual Air Conditioning and Heating System Front Blower Control The Front Blower Control selects whether the Climate Control System is ON or OFF. When the blower control is set to the O (OFF) position the front blower will turn off and the system will be placed in the Recirculation mode.
UNDERSTANDING YOUR INSTRUMENT PANEL Dual Zone Temperature Control — If Equipped With the Dual Zone Temperature Control System, each front seat occupant can independently control the temperature of air coming from the outlets on their side of the vehicle. 281 Front Mode Control The mode control allows you to choose from several patterns of air distribution. 4 NOTE: To improve your selection choices, the system allows you to operate at intermediate positions between the major modes.
UNDERSTANDING YOUR INSTRUMENT PANEL Air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow of air. Moving the air vane knob on the center outlets down, will close off the air flow from the center outlets. The thumbwheel next to the outboard outlets can be rotated to regulate or shut off the air flow from these outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL 283 Air comes from both the instrument panel outlets, floor outlets and defrost. A slight amount of air is also directed through the side window demister outlets. Bi-Level Mode NOTE: In many temperature lever positions, the bilevel mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL Floor Mode Mix Mode Floor Outlets Mix Outlets Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Air comes from the floor, defrost and side window demist outlets. This mode works best in cold or snowy conditions. It allows you to stay comfortable while keeping the windshield clear.
UNDERSTANDING YOUR INSTRUMENT PANEL 285 Defrost modes are selected. This is done to assist in drying the air and it will help in keeping the windows from fogging. Defrost Mode Manual Air Conditioning Operation To turn on the air conditioning, set the front blower control to any position except O (OFF) and press the A/C button which is located next to the recirculation button. An indicator light on the A/C button shows that the air conditioning is on.
UNDERSTANDING YOUR INSTRUMENT PANEL • If your air conditioning performance seems lower than expected, check the A/C air filter, if so equipped, and the front of the A/C condenser for an accumulation of dirt or insects. The A/C condenser is located in front of the radiator. The A/C air filter is located under the instrument panel on the passenger side. • Fabric type fascia protectors tend to block the amount of air to the condenser and may reduce air conditioning performance.
UNDERSTANDING YOUR INSTRUMENT PANEL 287 A/C Recirculation Programming The recirculation control is programmed to cancel the recirculation mode when the ignition key is turned OFF and will reset to outside air mode when the ignition key is turned ON. The frequent use of outside air will help keep odors from building up within the air conditionerheater housing. It is recommended that the recirculation mode be used as little as possible, especially in humid climates.
UNDERSTANDING YOUR INSTRUMENT PANEL Manual Rear Zone Climate Control — If Equipped The Manual Rear Zone Climate Control system has floor air outlets to the rear of the right side sliding door and overhead outlets at each outboard rear seating position. The unit provides warm or cool air through the floor and upper outlets. Rear Blower Control The primary control for the rear blower is on the front climate control unit located on the instrument panel.
UNDERSTANDING YOUR INSTRUMENT PANEL The center knob on the front climate control unit has five positions, “REAR”, “OFF”, and a range of blower speeds. Only when the primary control for the rear blower is in the “REAR” position do the second seat occupants have control of the rear blower speed. The rear blower control, located in the headliner near the center of the vehicle has an OFF position and 3 blower speed positions.
UNDERSTANDING YOUR INSTRUMENT PANEL in the cold position, cold air will be delivered from the headliner outlets. As the rear temperature knob is turned towards hot, the air will get warmer, and the air will be delivered from both the headliner and floor outlets. When the rear temperature knob reaches the full hot position, all of the air will be delivered from the floor outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL 291 front ATC unit is in the “AUTO” position. Once the desired temperature is displayed, the system will achieve and maintain that comfort level automatically. When the system is set up for your comfort level, it is not necessary to change the settings. You will experience the greatest efficiency by simply allowing the system to function automatically. Three-Zone Automatic Temperature Control Operation of the system is quite simple.
UNDERSTANDING YOUR INSTRUMENT PANEL To provide you with maximum comfort in the automatic mode, during cold start-ups the blower fan will remain off and “DELAY” will appear in the front ATC display until the engine warms up. Also, an estimate of the time remaining until the “DELAY” is over will appear periodically in the display. However, the fan will engage immediately if the defrost mode is selected or by rotating the blower control to any fixed blower speed.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Each of these features operate independently from each other. If any one feature is controlled manually, the remaining features will continue to operate automatically. 293 Panel Mode The left blower control knob can be set to any fixed blower speed by rotating the knob from low to high. The fan will now operate at a fixed speed until additional speeds are selected or either the ⬙Auto HI⬙ or ⬙Auto LO⬙ buttons are pressed.
UNDERSTANDING YOUR INSTRUMENT PANEL Bi-Level Mode Air comes from both the instrument panel outlets, floor outlets and defrost. A slight amount of air is also directed through the side window demister outlets. NOTE: In many temperature positions, the bi-level mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL 295 Mix Mode Floor Mode 4 Floor Outlets Mix Outlets Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Air comes from the floor, defrost and side window demist outlets. This mode works best in cold or snowy conditions. It allows you to stay comfortable while keeping the windshield clear.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: While operating in either ⬙Auto HI⬙ or ⬙Auto LO⬙, the system will not automatically sense the presence of fog, mist, or ice on the windshield. ⬙Defrost⬙ mode must be manually selected to clear the windshield and side glass. Defrost Mode Defrost Outlets Air comes from the windshield and side window demist outlets. Use this setting when necessary to defrost your windshield and side windows.
UNDERSTANDING YOUR INSTRUMENT PANEL Recirculation Control When outside air contains smoke, odors, high humidity, or if rapid cooling is desired, you may wish to recirculate interior air by pressing the recirculation button. The recirculation mode should only be used temporarily. The recirculation symbol will illuminate in the display when this button is selected. Push the button a second time to turn off the recirculation icon in the display and allow outside air into the vehicle.
UNDERSTANDING YOUR INSTRUMENT PANEL “AUTO”. Only when the “REAR SYSTEM” knob is in the “REAR CONTROL” position do the second seat occupants have control of the Rear Automatic Temperature Control System. The Rear Automatic Temperature Control System is located in the headliner near the center of the vehicle. Operation of the rear system is quite simple.
UNDERSTANDING YOUR INSTRUMENT PANEL • The temperature can be displayed in U.S. or Metric by selecting the US/M customer programmable feature. Refer to the “Overhead Console-Customer Programmable Features” in Section 3 of this manual. Rear Blower Control The rear blower control, located in the headliner near the center of the vehicle has an “OFF”, “AUTO” and a range of blower speeds. The rear blower control knob can be manually set to “OFF” or any fixed blower speed by rotating the knob from low to high.
UNDERSTANDING YOUR INSTRUMENT PANEL Rear Mode Control The Rear Mode Control, located in the headliner near the center of the vehicle can be used to select between Auto, Headliner, BiLevel and Floor modes. Auto Mode The rear system automatically maintains the correct mode and comfort level desired by the rear seat occupants. Floor Mode Air comes from the floor outlets. Bi-Level Mode Air comes from both the headliner outlets and the floor outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL glycol antifreeze coolant in water is recommended. Refer to section 7, Maintenance Procedures, of this manual for proper coolant selection. Winter Operation To insure the best possible heater and defroster performance, make sure the engine cooling system is functioning properly and the proper amount, type, and concentration of coolant is used. Refer to section 7, Maintenance Procedures, of this manual for proper coolant selection.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips A/C Air Filter — If Equipped The climate control system filters out dust, pollen and some odors from the air. Strong odors can not be totally filtered out. Refer to MAINTAINING YOUR VEHICLE, “Air Conditioner Maintenance” for filter replacement instructions. REAR WINDOW FEATURES Intermittent Rear Wiper Operation — Manual Temperature Control Only The controls are located on the Manual Temperature Control head above the front blower control.
UNDERSTANDING YOUR INSTRUMENT PANEL 303 Rear Washer Operation — Manual Temperature Control Only The controls are located on the Manual Temperature Control head above the front blower control. Press and hold the button for as long as spray is desired. If the button is depressed and held while the Intermittent wiper is on, the wiper will operated for a few seconds after the button is released, then resume intermittent operation.
UNDERSTANDING YOUR INSTRUMENT PANEL Intermittent Rear Wiper Operation — Automatic Temperature Control Only When this button is pressed and the ignition switch is in the ON position, the rear wiper will operate at a fixed interval of about 8 seconds. As vehicle speed increases, the time delay will shorten. The switch position as well as an indicator light will show when the wiper is ON. Rear Washer Operation — Automatic Temperature Control Only Press and hold the button as long as spray is desired.
UNDERSTANDING YOUR INSTRUMENT PANEL 305 Electric Rear Window Defroster — If Equipped Press this button to turn on the rear window defroster and the optional heated mirrors. A light will show that the defroster is on. The defroster automatically turns off after about 10 minutes of operation. If your vehicle is equipped with Infrared Three-Zone Automatic Temperature Control the rear defroster symbol will show in the display screen when the rear window defroster is on.
UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! To avoid damaging the electrical conductors of the rear window defroster, do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window. Labels can be peeled off after soaking with warm water.
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . . 310 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . . 310 ▫ Automatic Transmission Ignition Interlock System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 ▫ Four Speed Automatic Transmission . . . . . . . . 314 ▫ Extremely Cold Weather (Below ⫺29° C Or ⫺20° F) . . . . . . . . . . . . . . . 310 䡵 Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING ▫ Tire Markings . . . . . . . . . . . . . . . . . . . . . . . . 324 ▫ Alignment And Balance . . . . . . . . . . . . . . . . . 340 ▫ Tire Identification Number (TIN) . . . . . . . . . . 327 䡵 Tire Pressure Monitor System — If Equipped . . . 341 ▫ Tire Loading And Tire Pressure . . . . . . . . . . . 328 ▫ 1,2,3, Or 4 Tire(s) Low Pressure . . . . . . . . . . . 341 䡵 Tires—General Information . . . . . . . . . . . . . . . . 332 ▫ Check TPM System . . . . . . . . . . . . . . .
STARTING AND OPERATING 309 ▫ Fuel System Cautions . . . . . . . . . . . . . . . . . . 348 ▫ Common Towing Definitions . . . . . . . . . . . . . 355 ▫ Carbon Monoxide Warnings . . . . . . . . . . . . . . 349 ▫ Trailer Hitch Classification . . . . . . . . . . . . . . . 357 䡵 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 350 ▫ Trailer Towing Weights (Maximum Trailer Weight Ratings) . . . . . . . . . . . . . . . . . . . . . . 357 ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . .
STARTING AND OPERATING STARTING PROCEDURES CAUTION! Long periods of engine idling, especially at high engine speeds, can cause excessive exhaust temperatures which can damage your vehicle. Do not leave your vehicle unattended with the engine running. WARNING! Do not leave animals or children inside parked vehicles in hot weather; interior heat build up may cause serious injury or death. The gear selector must be in the NEUTRAL or PARK position before you can start the engine.
STARTING AND OPERATING 311 WARNING! WARNING! Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery, booster cables may be used to obtain a start from a booster battery or the battery in another vehicle.
STARTING AND OPERATING CAUTION! To prevent damage to the starter, do not crank the engine for more than 15 seconds at a time. Wait 10 to 15 seconds before trying again. If the engine has been flooded, it may start to run, but not have enough power to continue running when the key is released. If this occurs, continue cranking up to 15 seconds with the accelerator pedal pushed all the way to the floor. Release the accelerator pedal and the key once the engine is running smoothly.
STARTING AND OPERATING WARNING! Remember to disconnect the cord before driving. Damage to the 110-115 volt electrical cord could cause electrocution. 313 AUTOMATIC TRANSMISSION CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
STARTING AND OPERATING WARNING! It is dangerous to shift the selector lever out of “P” or “N” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal.
STARTING AND OPERATING Reset Mode - Electronic Transmission The transmission is monitored electronically for abnormal conditions. If a condition is detected that could cause damage, the transmission automatically shifts into second gear. The transmission remains in second gear despite the forward gear selected. Park (P), Reverse (R), and Neutral (N) will continue to operate. This Reset feature allows the vehicle to be driven to a dealer for service without damaging the transmission.
STARTING AND OPERATING “R” Reverse Shift into this range only after the vehicle has come to a complete stop. while in this range. The “3” position should also be used when descending steep grades to prevent brake system distress. “N” Neutral Engine may be started in this range. NOTE: Using the “3” range while operating the vehicle under heavy operating conditions will improve performance and extend transmission life by reducing excessive shifting and heat build up.
STARTING AND OPERATING 317 PARKING BRAKE When the parking brake is applied with the ignition switch on, the brake light in the instrument cluster will turn on. NOTE: This light only shows that the parking brake is applied. It does not show the degree of brake application. Before leaving the vehicle, make sure that the parking brake is fully applied and place the gear selector in the Park position.
STARTING AND OPERATING added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on a uphill grade. The parking brake should always be applied when the driver is not in the vehicle. WARNING! Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector lever. Don’t leave the keys in the ignition.
STARTING AND OPERATING by increased pedal travel during application, greater pedal force required to slow or stop, and potential activation of the Brake Warning Lamp. Anti-Lock Brake System — If Equipped The Anti-Lock Brake System provides increased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to prevent wheel lock-up.
STARTING AND OPERATING When the vehicle is driven over approximately 15 mph (25 km/h), you may also hear a slight clicking sound as well as some related motor noises. These noises are the system performing its self check cycle to ensure that the ABS system is working properly. This self check occurs each time the vehicle is started and accelerated past approximately 15 mph (25 km/h). ABS is activated during braking under certain road or stopping conditions.
STARTING AND OPERATING WARNING! • Anti-lock system (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The ABS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
STARTING AND OPERATING Upon initial start-up in cold weather, the power steering pump may make noise for a short period of time. This is due to the cold, thick fluid in the steering system. This noise should be considered normal, and does not in any way damage the steering system. WARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible.
STARTING AND OPERATING The system is always in the “stand by” mode unless, • The Traction Control Switch has been used to turn the system OFF 323 • The system has been deactivated to prevent damage to the brake system due to overheated brake temperatures NOTE: The Traction Control will make buzzing or clicking sounds when in operation. NOTE: Extended heavy use of Traction Control may cause the system to deactivate and turn on the TRAC and the OFF indicators located in the instrument cluster.
STARTING AND OPERATING TIRE SAFETY INFORMATION Tire Markings • European Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter ⬙P⬙ is absent from this tire size designation. Example: 215/65R15 96H • LT (Light Truck)-Metric tire sizing is based on U.S. design standards.
STARTING AND OPERATING 325 Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....ⴖ = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm) 65 = Aspect Ratio in Percent (%) —Ratio of section height to section width of tire. 10.
STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be achieved under specified operating conditions. (i.e. tire pressure, vehicle loading, road conditions and posted speed limits).
STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire however the date code may only be on one side. Tires with white sidewalls will have the full TIN including date code 327 located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side then you will find it on the inboard side of the tire.
STARTING AND OPERATING Tire Loading and Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar.
STARTING AND OPERATING 3) the tire size designed for your vehicle 4) the cold tire inflation pressures for the front, rear and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the “Tire and Loading Information” placard and in the “Vehicle Loading” section of this manual.
STARTING AND OPERATING 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if “XXX” amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lb. (since 5 x 150 = 750, and 1400 – 750 = 650 lb.) 5. Determine the combined weight of luggage and cargo being loaded on the vehicle.
STARTING AND OPERATING 331 5
STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES—GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle. Three primary areas are affected by improper tire pressure: 1.
STARTING AND OPERATING 333 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Underinflation also increases tire rolling resistance and results in higher fuel consumption. 3. Ride Comfort and Vehicle Stability— Proper tire inflation contributes to a comfortable ride. Overinflation produces a jarring and uncomfortable ride.
STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap–if equipped. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure”. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1 km) after a 3 hour period.
STARTING AND OPERATING loading may be required for high speed vehicle operation. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pressures. WARNING! High speed driving with your vehicle under maximum load is dangerous. The added strain on your tires could cause them to fail. You could have a serious accident. Don’t drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).
STARTING AND OPERATING Compact Spare Tire — If Equipped The compact spare is for temporary emergency use with radial tires. It is engineered to be used on your style vehicle only. Since this tire has limited tread life, the original tire should be repaired (or replaced) and reinstalled at the first opportunity. Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare.
STARTING AND OPERATING Limited Use Spare — If Equipped The limited use spare tire is for temporary emergency use on your vehicle. This tire is identified by a limited use spare tire warning label located on the limited use spare tire and wheel assembly. This tire may look like the original equipped tire on the front or rear axle of your vehicle, but it is not. Installation of this limited use spare tire affects vehicle handling.
STARTING AND OPERATING WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck. And don’t let anyone near a spinning wheel, no matter what the speed. Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced.
STARTING AND OPERATING 339 Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: Keep unmounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease and gasoline. • Driving style Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure.
STARTING AND OPERATING WARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have an accident resulting in serious injury or death.
STARTING AND OPERATING Improper alignment will not cause vehicle vibration. Vibration may be a result of tire and wheel out-ofbalance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear. TIRE PRESSURE MONITOR SYSTEM — IF EQUIPPED The Tire Pressure Monitor System (TPMS) system uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels (EXCLUDING THE SPARE TIRE).
STARTING AND OPERATING CAUTION! The TPMS system has been optimized for the original equipment tires and wheels. TPMS system pressures have been established for the tire size equipped on your vehicle. Undesirable operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. After-market wheels can cause sensor damage. Do not use tire sealant or balance beads if your vehicle is equipped with TPMS system as damage to the sensors may result.
STARTING AND OPERATING General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. The tire pressure sensors are covered under one of the following licenses: United States . . . . . . . . . . . . . . . . . . . . . KR5S120123 Canada . . . . . . . . . . . .
STARTING AND OPERATING CAUTION! To avoid damage to your vehicle or tires, observe the following precautions: • Because of restricted chain clearance between tires and other suspension components, it is important that only chains in good condition are used. Broken chains can cause serious damage. Stop the vehicle immediately if noise occurs that could indicate chain breakage. Remove the damaged parts of the chain before further use.
STARTING AND OPERATING Snow tires generally have lower speed ratings than what was originally equipped with your vehicle and should not be operated at sustained speeds over 75 mph (120 km/h). TIRE ROTATION RECOMMENDATIONS Tires on the front and rear axles of vehicles operate at different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates, and tend to develop irregular wear patterns. These effects can be reduced by timely rotation of tires.
STARTING AND OPERATING FUEL REQUIREMENTS Your vehicle is designed to meet all emission regulations and provide excellent fuel economy when using high quality regular unleaded gasoline with an octane rating of 87. The use of premium gasoline is not recommended. The use of premium gasoline will provide no benefit over high quality regular gasolines, and in some circumstances, may result in poorer performance. Light spark knock at low engine speeds is not harmful to your engine.
STARTING AND OPERATING Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as 10% ethanol, MTBE, and ETBE. Oxygenates are required in some areas of the country during the winter months to reduce carbon monoxide emissions. Fuels blended with these oxygenates may be used in your vehicle. CAUTION! DO NOT use gasolines containing Methanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system components.
STARTING AND OPERATING Materials Added to Fuel All gasoline sold in the United States is required to contain effective detergent additives. Use of additional detergents or other additives are not needed under normal conditions and would result in additional cost. Therefore you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law.
STARTING AND OPERATING Carbon Monoxide Warnings WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
STARTING AND OPERATING ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door on the left side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). A poorly fitting cap could let impurities into the fuel system.
STARTING AND OPERATING NOTE: • Tighten the fuel filler cap until you hear a “clicking” sound. This is an indication that the fuel filler cap is properly tightened. If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, GASCAP will be displayed in the instrument cluster odometer. Tighten the fuel filler cap properly and press the odometer reset button to turn the GASCAP message off.
STARTING AND OPERATING VEHICLE LOADING The load carrying capacity of your vehicle is shown in the charts that follow. This information should be used for passenger and luggage loading as indicated. • Vehicle Identification Number (VIN) If seats are removed for carrying cargo, do not exceed the specified GVWR and GAWR. The bar code allows a computer scanner to read the Vehicle Identification Number (VIN).
STARTING AND OPERATING WARNING! Because the front wheels drive and steer the vehicle, it is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have an accident. Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GAWR.
STARTING AND OPERATING A loaded vehicle is shown in the illustration. Note that neither the GVWR or the GAWR capacities have been exceeded. Example Only Empty Weight Load (Including driver, passengers and cargo) Total GAWR Front Axle 2140 lbs 360 lbs Rear Axle 2500 lbs 2544 lbs 2450 lbs 2544 lbs 1470 lbs 980 lbs TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle.
STARTING AND OPERATING Common Towing Definitions The following trailer towing related definitions will assist you in understanding the following information: Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, cargo and tongue weight. The total load must be limited so that you do not exceed the GVWR.
STARTING AND OPERATING WARNING! It is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have an accident. Tongue Weight (TW) The downward force exerted on the hitch ball by the trailer. In most cases it should not be less than 10% or more than 15% of the trailer load. You must consider this as part of the load on your vehicle.
STARTING AND OPERATING Trailer Hitch Classification Your vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional Trailer Tow Prep Package. See your dealer for package content. The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition.
STARTING AND OPERATING Engine/Transmission GCWR (Gross Combined Wt. Rating) 3.3L & 3.8L Auto6,600 lbs (2993 kg) matic Frontal Area 40 SQ. FT. (3.72 square meters) 6,600 lbs (2993 kg) 40 SQ. FT. (3.72 square meters) 6,600 lbs (2993 kg) 40 SQ. FT. (3.72 square meters) Max. GTW (Gross Trailer Wt.) Up to 2 persons & Luggage 1,800 lbs (816 kg) 3 to 5 persons & Luggage 1,350 lbs (612 kg) 6 to 7 persons & Luggage 1,000 lbs (454 kg) Max. Tongue Wt.
STARTING AND OPERATING Engine/Transmission GCWR (Gross Combined Wt. Rating) 3.3L & 3.8L Auto8,600 lbs (3900 kg) matic with trailer tow package 8,600 lbs (3900 kg) Frontal Area Max. GTW (Gross Trailer Wt.) 40 SQ. FT. (3.72 Up to 2 persons & square meters) Luggage 3,800 lbs (1723 kg)* 40 SQ. FT. (3.72 3 to 5 persons & square meters) Luggage 3,350 lbs (1519 kg)* 8,600 lbs (3900 kg) 40 SQ. FT. (3.
STARTING AND OPERATING which will cause loss of control of the vehicle and trailer. Failure to load trailers heavier in front is the cause of many trailer accidents. Never exceed the maximum tongue weight stamped on your bumper or trailer hitch. Consider the following items when computing the weight on the rear axle of the vehicle: • The tongue weight of the trailer. • The weight of any other type of cargo or equipment put in or on your vehicle. • The weight of the driver and all passengers.
STARTING AND OPERATING Towing Requirements To promote proper break-in of your new vehicle drivetrain components the following guidelines are recommended: CAUTION! • Avoid towing a trailer for the first 500 miles (805 km) of vehicle operation. Doing so may damage your vehicle. • During the first 500 miles (805 km) of trailer towing, limit your speed to 50 mph (80 km/h). Perform the maintenance listed in Section 8 of this manual. When towing a trailer, never exceed the GAWR, or GCWR, ratings.
STARTING AND OPERATING • Safety chains must always be used between your vehicle and trailer. Always connect the chains to the frame or hook retainers of the vehicle hitch. Cross the chains under the trailer tongue and allow enough slack for turning corners. • Vehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. Put the tow vehicle automatic transmission in P for Park. Always, block or ⬙chock⬙ the trailer wheels. • GCWR must not be exceeded.
STARTING AND OPERATING − When replacing tires refer to the Tires–General Information section of this manual on Replacement Tires for proper tire replacement procedures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s GVWR and GAWR limits. 363 − Trailer brakes are recommended for trailers over 1,000 lbs (454 kg) and required for trailers in excess of 2,000 lbs (907 kg).
STARTING AND OPERATING WARNING! NOTE: Do not cut or splice wiring into the vehicles wiring harness. Do not connect trailer brakes to your vehicle’s hydraulic brake lines. It can overload your brake system and cause it to fail. You might not have brakes when you need them and could have an accident. Towing any trailer will increase your stopping distance. When towing you should allow for additional space between your vehicle and the vehicle in front of you.
STARTING AND OPERATING 365 Towing Tips — Automatic Transmission The “D” range can be selected when towing. However, if frequent shifting occurs while in this range, the “3” range should be selected. NOTE: Using the “3” range while operating the vehicle under heavy operating conditions will improve performance and extend transmission life by reducing excessive shifting and heat build up. This action will also provide better engine braking.
STARTING AND OPERATING Towing Tips — Electronic Speed Control (If Equipped) − Air Conditioning Turn off temporarily. − Don’t use in hilly terrain or with heavy loads. − refer to Cooling System Operating information in the Maintenance section of this manual for more information. − When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flasher . . . . . . . . . . . . . . . . . . 368 ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . . 369 䡵 Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . . 392 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . . 370 䡵 Towing A Disabled Vehicle . . . . . . . . . . . . . . . . 393 ▫ Jacking Instructions — Stow ’n Go Seating . . . 371 ▫ With Ignition Key .
WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The hazard flasher switch is located in the center of the instrument panel above the radio. To engage the Hazard Warning Flashers, depress the switch on the instrument panel. When the Hazard Warning Switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Push the switch a second time to turn off the flashers.
WHAT TO DO IN EMERGENCIES IF YOUR ENGINE OVERHEATS In any of the following situations, you can reduce the potential for overheating by taking the appropriate action. • On the highways — Slow down. • In city traffic — While stopped, put transmission in neutral, but do not increase engine idle speed. NOTE: There are steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off.
WHAT TO DO IN EMERGENCIES WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7, Maintenance, of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph. JACKING AND TIRE CHANGING WARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you.
WHAT TO DO IN EMERGENCIES Jacking Instructions — Stow ’n Go Seating Preparations For Jacking Park the vehicle on a firm level surface, avoid ice or slippery areas, set the parking brake and place the gear selector in PARK. Turn OFF the ignition. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 371 • Turn on the Hazard Warning Flasher.
WHAT TO DO IN EMERGENCIES Jack Location — Stow ’n Go Seating The jack, jack handle and winch handle tools are stowed behind the rear left side trim panel in the rear cargo area. Pull up on the lever to release the cover. Remove the scissors jack and jack handle by rotating the small wing nut to the left. Also remove the tool pouch containing the spare tire winch handle tools, which is located next to the jack and jack handle.
WHAT TO DO IN EMERGENCIES 373 Spare Tire Stowage — Stow ’n Go Seating For vehicles equipped with Stow ’n Go seating, the spare tire is stowed inside a protective cover located under the center of the vehicle by means of a cable winch mechanism. The “spare tire drive” nut is located on the floor, under a plastic cap between the front seats.
WHAT TO DO IN EMERGENCIES Jacking Instructions — Stow ’n Go Seating 1. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 2. To remove the compact spare tire/cover assembly, assemble the winch handle extensions to form a “T’ and fit the winch “T” handle over the drive nut.
WHAT TO DO IN EMERGENCIES 375 CAUTION! WARNING! The winch mechanism is designed for use with the winch “T” handle only. Use of an air wrench or other power tools is not recommended and can damage the winch. Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. 3.
WHAT TO DO IN EMERGENCIES NOTE: If either front tire is flat, it may be necessary to jack up the vehicle to remove the compact spare tire/ cover assembly from under the vehicle. Refer to jack engagement locations in the following steps for proper jack placement. 4. When the compact spare tire/cover assembly is clear of the vehicle, stand the tire/cover assembly upright and remove the wheel spacer by squeezing the two retaining tabs together. Spare Tire/Cover Removal 5.
WHAT TO DO IN EMERGENCIES 377 6 Jack Engagement Locations
WHAT TO DO IN EMERGENCIES 6. These locations are on the sill flange of the body and consist of a pair of downstanding tabs. The jack is to be located, engaging the flange, between the pair of tabs closest to the wheel to be changed. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged in the described location. Do not raise the vehicle until you are sure the jack is securely engaged. 7.
WHAT TO DO IN EMERGENCIES 379 10. Lower the vehicle by turning the jack screw to the left. WARNING! 11. Finish tightening the lug nuts. Push down on the wrench while tightening for increased leverage. Alternate lug nuts until each nut has been tightened twice. Correct wheel nut tightness is 130 N·m (95 ft. lbs). If in doubt about the correct tightness, have them checked with a torque wrench by your dealer or at a service station.
WHAT TO DO IN EMERGENCIES 14. Stow the cable and wheel spacer before driving the vehicle, reassemble the winch handle extensions to form a “T’ and fit the winch “T” handle over the drive nut. Rotate the nut to the right approximately 33 turns until the winch mechanism clicks at least three times. WARNING! A loose jack, thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts in the place provided. 15.
WHAT TO DO IN EMERGENCIES 381 WARNING! A loose compact spare tire/cover assembly, thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the compact spare tire with the cover assembly in the place provided. CAUTION! Spare Tire Removal The winch mechanism is designed for use with the winch “T” handle only. Use of an air wrench or other power tools is not recommended and can damage the winch.
WHAT TO DO IN EMERGENCIES 2. Assemble the winch handle extensions to form the Spare Tire Hook and pull the wheel spacer from under the vehicle. 3. Turn the compact spare tire so that the valve stem is down and place the tire into the spare tire cover assembly. Slide the wheel spacer through the center of the wheel and spare tire cover assembly so that the two retainer tabs snap out and engage the spare tire cover on the opposite side.
WHAT TO DO IN EMERGENCIES 383 CAUTION! WARNING! For vehicles equipped with Stow ’n Go seating, the Winch Mechanism is designed specifically to stow a COMPACT Spare Tire ONLY. Do not attempt to use the Winch to stow the Full Size ’Flat’ Tire, or any other Full Size Tire. Vehicle damage may result. Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
WHAT TO DO IN EMERGENCIES Jack Location — Non Stow ’n Go Seating The jack, jack handle are stowed behind the rear left side trim panel in the rear cargo area. Pull up on the lever to release the cover. Remove the spare wheel, scissors jack and jack handle from stowage by rotating the wing nut to the left.
WHAT TO DO IN EMERGENCIES 385 2. Fit the jack handle over the drive nut. Rotate the nut to the left until the spare is on the ground with enough slack cable to allow you to pull the tire out from under the vehicle. CAUTION! The winch mechanism is designed for use with the jack handle only. Use of an air wrench or other power tools is not recommended and can damage the winch. Lowering Spare Tire Jacking Instructions — Non Stow ’n Go Seating 1.
WHAT TO DO IN EMERGENCIES Jack Engagement Locations
WHAT TO DO IN EMERGENCIES 5. These locations are on the sill flange of the body and consist of a pair of downstanding tabs. The jack is to be located, engaging the flange, between the pair of tabs closest to the wheel to be changed. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged in the described location. Do not raise the vehicle until you are sure the jack is securely engaged. 6.
WHAT TO DO IN EMERGENCIES NOTE: Do not install the wheel cover on the compact spare. WARNING! Do not use a hammer or force to install the wheel covers. A loose tire or jack, thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. 9. Lower the vehicle by turning the jack screw to the left. 10. Finish tightening the lug nuts. Push down on the wrench while tightening for increased leverage.
WHAT TO DO IN EMERGENCIES • For convenience in checking the spare tire inflation, stow with the valve stem toward the rear of the vehicle. • Using the jack handle, rotate the drive nut to the right until the wheel is drawn into place against the underside of the vehicle. • Continue to rotate the nut until you hear the mechanism click three times. It cannot be overtightened. Push against the tire several times to be sure it is securely in place. 13. Stow the jack and jack handle. 14.
WHAT TO DO IN EMERGENCIES WARNING! • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery, booster cables may be used to obtain a start from another vehicle. This type of start can be dangerous if done improperly, so follow this procedure carefully.
WHAT TO DO IN EMERGENCIES 5. Connect the other cable, first to the negative terminal of the booster battery and then to the engine of the vehicle with the discharged battery. Make sure you have a good contact on the engine. 6. Start the engine in the vehicle which has the booster battery, let the engine idle a few minutes, then start the engine in the vehicle with the discharged battery. 7. When removing the jumper cables, reverse the above sequence exactly. Be careful of the moving belts and fan.
WHAT TO DO IN EMERGENCIES 2. Slow down if road has standing water or puddles. 3. Replace tires when tread wear indicators first become visible. 4. Keep tires properly inflated. 5. Maintain sufficient distance between your vehicle and the vehicle in front to avoid a collision in a sudden stop. FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels.
WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE With Ignition Key Your vehicle may be towed under the following conditions: The gear selector must be in NEUTRAL, the distance to be traveled must not exceed 100 miles (160 km), and the towing speed must not exceed 44 mph (72 km/h). Exceeding these towing limits may cause a transmission geartrain failure.
WHAT TO DO IN EMERGENCIES If it is necessary to use the accessories while being towed (wipers, defrosters, etc.), the key must be in the ON position, not the ACCESSORY position. Make certain the transmission remains in NEUTRAL. Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position. The only approved method of towing with out the ignition key is with a flat bed truck. Proper towing equipment is necessary to prevent damage to the vehicle.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 3.3L/3.8L Engines . . . . . . . . . . . . . . . . . . . . . . 398 ▫ Drive Belts — Check Condition And Tension . . 406 䡵 Onboard Diagnostic System — OBD II . . . . . . . . 399 ▫ Spark Plugs . . . . . . . . . . . . . . . . . . . . . . . . . 407 䡵 Emissions Inspection And Maintenance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . . 407 䡵 Replacement Parts . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE ▫ Steering Linkage . . . . . . . . . . . . . . . . . . . . . . 413 ▫ Drive Shaft Universal Joints . . . . . . . . . . . . . . 413 ▫ Body Lubrication . . . . . . . . . . . . . . . . . . . . . 414 ▫ Windshield Wiper Blades . . . . . . . . . . . . . . . . 414 ▫ Windshield And Rear Window Washers . . . . . 415 ▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . . 415 ▫ Cooling System . . . . . . . . . . . . . . . . . . . . . . . 416 ▫ Hoses And Vacuum/Vapor Harnesses . . .
MAINTAINING YOUR VEHICLE 397 ▫ Center High Mounted Stop Light (CHMSL) . . . 443 䡵 Fluids, Lubricants And Genuine Parts . . . . . . . . 445 ▫ License Light . . . . . . . . . . . . . . . . . . . . . . . . 443 ▫ Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 445 䡵 Fluids And Capacities . . . . . . . . . . . . . . . . . . . 444 ▫ Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 3.3L/3.8L ENGINES Engine Compartment 3.3L/3.
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
MAINTAINING YOUR VEHICLE EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system. Failure to pass could prevent vehicle registration. For states which have an I/M (Inspection and Maintenance) requirement, this check verifies the following: the MIL (Malfunction Indicator Lamp) is functioning and is not on when the engine is running, and that the OBD (On Board Diagnostic) system is ready for testing.
MAINTAINING YOUR VEHICLE 401 ignition key or start the engine. This means that your vehicle’s OBD system is not ready and you should not proceed to the I/M station. vehicle serviced before going to the I/M station. The I/M station can fail your vehicle because the MIL symbol is on with the engine running. b. The MIL will not flash at all and will remain fully illuminated until you turn off the ignition key or start the engine.
MAINTAINING YOUR VEHICLE NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. WARNING! Besides the maintenance items for which there are fixed maintenance intervals, there are other items that should operate satisfactorily without periodic maintenance.
MAINTAINING YOUR VEHICLE 403 The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off or before starting the engine after it has sat overnight. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level readings. Maintain the oil level between the MIN and MAX markings on the dipstick. Adding one quart of oil when the reading is at the MIN mark will result in a MAX reading on these engines.
MAINTAINING YOUR VEHICLE Change Engine Oil Road conditions and your kind of driving affects the interval at which your oil should be changed. Check the following list to see if any apply to you. • Day or night temperatures are below 32°F (0°C). • Stop and Go driving. • Extensive engine idling. • Driving in dusty conditions. • Short trips of less than 10 miles (16 km). • More than 50% of your driving is at sustained high speeds during hot weather, above 90°F (32°C). • Trailer towing.
MAINTAINING YOUR VEHICLE American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils. Engine Oil Viscosity (SAE Grade) SAE 5W-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy.
MAINTAINING YOUR VEHICLE Disposing of Used Engine Oil And Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can present a problem to the environment. Contact your dealer, service station, or governmental agency for advice on how and where used oil and oil filters can be safely discarded in your area. Engine Oil Filter The engine oil filter should be replaced at every engine oil change.
MAINTAINING YOUR VEHICLE Spark Plugs Spark plugs must fire properly to assure engine performance and emission control. New plugs should be installed at the specified mileage. The entire set should be replaced if there is any malfunction due to a faulty spark plug, malfunctioning spark plugs can damage the catalytic converter. For proper type of replacement spark plugs, refer to the “Vehicle Emission Control Information” label in the engine compartment.
MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic converter will not require maintenance. However, it is important to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition.
MAINTAINING YOUR VEHICLE In unusual situations involving grossly malfunctioning engine operation, a scorching odor may indicate severe and abnormal catalyst overheating. If this occurs, the vehicle should be stopped, the engine shut off and the vehicle allowed to cool. Thereafter, service, including a tune-up to manufacturer’s specifications, should be obtained immediately.
MAINTAINING YOUR VEHICLE WARNING! CAUTION! Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. Battery gas is flammable and explosive. Keep flame or sparks away from the battery. Don’t use a booster battery or any other booster source with an output greater than 12 volts.
MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an Authorized Dealer at the start of each warm season. This service should include cleaning of the condenser fins and a system performance check. Drive belt tension should also be checked at this time. 411 WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system.
MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by dealers or other service facilities using recovery and recycling equipment. NOTE: Use only manufacturer approved A/C System Sealers, Stop Leak Products, Seal Conditioners, Compressor Oil, or Refrigerants.
MAINTAINING YOUR VEHICLE WARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to insure accurate fluid level reading. Do not overfill. Use only manufacturers recommended power steering fluid. If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to Fluids, Lubricants, and Genuine Parts for correct fluid type.
MAINTAINING YOUR VEHICLE Continued operation could result in failure of the universal joint due to water and dirt contamination of the grease. This would require complete replacement of the joint assembly. The external lock cylinders should be lubricated twice a year, preferably in the fall and spring. Apply a small amount of a high quality lubricant such as Mopar威 Lock Cylinder Lubricant directly into the lock cylinder.
MAINTAINING YOUR VEHICLE 415 Windshield and Rear Window Washers The fluid reservoir for the windshield washers and the rear window washer is shared. It is located in the engine compartment and should be checked for fluid level at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water. The washer fluid reservoir will hold a full gallon of fluid when the Low Washer Fluid Light illuminates.
MAINTAINING YOUR VEHICLE Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment.
MAINTAINING YOUR VEHICLE Engine Coolant Checks Check the engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable). If coolant is dirty or rusty in appearance, the system should be drained, flushed and refilled with fresh coolant. Check the front of the A/C condenser for any accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden hose vertically down the face of the condenser.
MAINTAINING YOUR VEHICLE CAUTION! Mixing of coolants other than specified HOAT engine coolants, may result in engine damage and may decrease corrosion protection. If a non-HOAT coolant is introduced into the cooling system in an emergency, it should be replaced with the specified coolant as soon as possible. Do not use plain water alone or alcohol base engine coolant (antifreeze) products.
MAINTAINING YOUR VEHICLE The use of lower quality water will reduce the amount of corrosion protection in the engine cooling system. Please note that it is the owner’s responsibility to maintain the proper level of protection against freezing according to the temperatures occurring in the area where the vehicle is operated. NOTE: Mixing coolant types will decrease the life of the engine coolant and will require more frequent coolant changes.
MAINTAINING YOUR VEHICLE do not store ethylene glycol based engine coolant in open containers or allow it to remain in puddles on the ground. If ingested by a child, contact a physician immediately. Clean up any ground spills immediately. Engine Coolant Level The coolant bottle provides a quick visual method for determining that the coolant level is adequate. With the engine cold, the level of the coolant in the coolant recovery bottle should be between the ranges indicated on the bottle.
MAINTAINING YOUR VEHICLE • Check coolant freeze point in the radiator and in the coolant recovery bottle. If antifreeze needs to be added, contents of coolant recovery bottle must also be protected against freezing. • If frequent coolant additions are required, or if the level in the coolant recovery bottle does not drop when the engine cools, the cooling system should be pressure tested for leaks.
MAINTAINING YOUR VEHICLE Inspect all hose connections such as clamps and couplings to make sure they are secure and no leaks are present. Components should be replaced immediately if there is any evidence of wear or damage that could cause failure. Brakes In order to assure brake system performance, all brake system components should be inspected periodically. Suggested service intervals can be found in the Maintenance Schedules.
MAINTAINING YOUR VEHICLE 423 Insure nylon tubing in these areas has not melted or collapsed. replaced immediately! Eventual deterioration of the hose can take place resulting in a possibility of a burst failure. Inspect all hose connections such as clamps and couplings to make sure they are secure and no leaks are present. WARNING! NOTE: Often, fluid such as oil, power steering fluid, and brake fluid are used during assembly plant operations to facilitate the assembly of hoses to couplings.
MAINTAINING YOUR VEHICLE Overfilling of fluid is not recommended because it may cause leaking in the system. WARNING! Add enough fluid to bring the level up to the requirements described on the brake fluid reservoir. With disc brakes, fluid level can be expected to fall as the brake pads wear. However, low fluid level may be caused by a leak and a checkup may be needed. Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire.
MAINTAINING YOUR VEHICLE Fuel System Hoses Electronic Fuel Injection high pressure fuel systems are designed with hoses which have unique material characteristics to provide adequate sealing and resist attack by deteriorated gasoline. Use only the manufacturers specified hoses in any fuel system servicing. It is mandatory to replace all clamps that have been loosened or removed during service. Care should be taken in installing new clamps to insure they are properly torqued.
MAINTAINING YOUR VEHICLE CAUTION! Using a transmission fluid other than the manufacturers recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than the manufacturers recommended fluid will result in more frequent fluid and filter changes. Refer to Fluids, Lubricants and Genuine Parts for correct fluid type.
MAINTAINING YOUR VEHICLE 5. Remove the dipstick and determine if the fluid is hot or warm. Hot fluid is approximately 180°F (82°C), which is the normal operating temperature after the vehicle has been driven at least 15 miles (24 km). The fluid cannot be comfortably held between the finger tips. Cold is when the fluid is below 80°F (27°C). 6. Wipe the dipstick clean and reinsert until seated. Remove dipstick and note reading. 427 CAUTION! Do not overfill.
MAINTAINING YOUR VEHICLE Severe Usage is defined as: • Police, taxi, limousine, commercial type operation, or trailer towing where the vehicle is driven regularly for more than 45 minutes of continuous operation. NOTE: Refer to Section 8 of this manual for Maintenance Schedules. If the transmission is disassembled for any reason, the fluid and filter should be changed. Special Additives Do not add any fluid additives to the transmission.
MAINTAINING YOUR VEHICLE The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. What Causes Corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes are: • Road salt, dirt and moisture accumulation. • Stone and gravel impact. • Insects, tree sap and tar. • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants.
MAINTAINING YOUR VEHICLE CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. • It is important that the drain holes in the lower edges of the doors, rocker panels and trunk be kept clear and open.
MAINTAINING YOUR VEHICLE • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • Use Mopar touch up paint on scratches as soon as possible. Your dealer has touch up paint to match the color of your vehicle. Interior Care Use Mopar Total Clean to clean fabric upholstery and carpeting. Interior Trim should be cleaned starting with a damp cloth, a damp cloth with Mopar Total Clean, then Mopar Spot & Stain Remover if absolutely necessary.
MAINTAINING YOUR VEHICLE Cleaning High Gloss Front Door B-pillar Appliques When cleaning the front door B-pillar appliques, care must be taken to avoid scratching the plastic. equipped with electric defrosters or the right rear quarter window equipped with the radio antenna. Do not use scrapers or other sharp instruments which may scratch the elements. 1. Remove all dirt with a wet soft rag. A mild soap solution may be used, do not use high alcohol content or abrasive cleaners.
MAINTAINING YOUR VEHICLE 433 Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the belts need cleaning, use a mild soap solution or lukewarm water. Do not remove the belts from the car to wash them. Replace the belts if they appear frayed or worn or if the buckles do not work properly.
MAINTAINING YOUR VEHICLE Cleaning Soak the drawer, with the drawer front facing up, in a mixture of medium hot tap water and one teaspoon of mild liquid dish soap. Let soak for approximately one hour. After one hour pull the drawer from the water and dip it back into the water about six times. This will loosen any remaining debris. Rinse the drawer thoroughly under warm running water. Shake the excess water from the drawer and dry the outer surfaces with a clean soft cloth.
MAINTAINING YOUR VEHICLE Cavity F4 F9 F10 F13 F19 F20 F22 F27 Maxi Fuse 30 Amp Pink 40 Amp Green 40 Amp Green 40 Amp Green 40 Amp Green 30 Amp Pink 30 Amp Pink 40 Amp Green Description Front Wipers Cavity F28 Anti-Lock Brake System (ABS) Pump Front Blower F30 Electronic Back Light (EBL) F32 Body Control Module (BCM) Feed 1 Central Amplifier Seats Radiator Fan F31 Maxi Fuse 40 Amp Green 40 Amp Green 40 Amp Green 40 Amp Green 435 Description Power Windows Headlight Washers (Export Only) Power Sli
MAINTAINING YOUR VEHICLE Cavity F1 F2 F3 F5 F6 F8 F11 F12 F14 Mini Fuse 20 Amp Yellow 15 Amp Blue 15 Amp Blue 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 25 Amp Natural 20 Amp Yellow Description Fog Lights Cavity F15 Left Park/Tail Light Right Park/Tail Light RDO/IP Ignition F15 12 Volt Out Ignition or Battery Horn F18 F21 F17 EWD/ Rear Wiper F23 F24 Rear Blower F26 Ignition Off Draw (IOD) F33 Mini Fuse 20 Amp Yellow 25 Amp Natural 20 Amp Yellow 15 Amp Blue 25 Amp Natural 10
MAINTAINING YOUR VEHICLE CAUTION! • When installing the Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
MAINTAINING YOUR VEHICLE • Anytime you store your vehicle, or keep it out of service (i.e. vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air and high blower setting. This will insure adequate system lubrication to minimize the possibility of compressor damage when the system is started again. REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb Number Center & Rear Dome Light . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 439 BULB REPLACEMENT Headlights 1. Remove the three screws securing the headlight module. 3. Disconnect the electrical connector and replace the bulb. 2. Turn the bulb socket retaining ring or the bulb assembly counterclockwise. NOTE: On some vehicles it may be necessary to slide the red release lock rearward and push forward on the connector while depressing the release tab.
MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Front Park/Turn Signal and Sidemarker Lights 1. Remove the three screws securing the headlight module.
MAINTAINING YOUR VEHICLE 2. Twist the turn signal socket to remove from the headlight module and pull bulb from socket. 441 Front Fog Light 1. Reach behind the front fascia from under the vehicle. 2. Twist the front fog light bulb to remove from the fog light housing. 3. Disconnect the electrical connector and replace the bulb. CAUTION! 3. Replace bulb, reinstall socket and then reinstall the headlight module. Do not touch the new bulb with your fingers.
MAINTAINING YOUR VEHICLE Rear Tail, Stop, Turn Signal, Side Marker and Back-up Lights 3. Squeeze the socket assembly tabs to remove it from the housing. 1. Raise the liftgate. 2. Remove the two tail light assembly push-in type fasteners, by prying under the fastener head with a large flat screwdriver. 4. Pull the bulb to remove it from the socket. 5. Replace the bulb, reinstall the socket, and reattach the light assembly.
MAINTAINING YOUR VEHICLE Center High Mounted Stop Light (CHMSL) 1. Remove the two screws securing the CHMSL. 443 2. Twist the bulb socket to remove from the CHMSL housing. 3. Pull the bulb out of the socket. 4. Replace the bulb, reinstall the socket and reattach the CHMSL. License Light 1. Remove the two lens assembly mounting screws. 2. Pull the bulb out of the socket. Replace the bulb and reattach the lens assembly.
MAINTAINING YOUR VEHICLE FLUIDS AND CAPACITIES Fuel (Approximate) 87 Octane Engine Oil-with filter 3.3 & 3.8 Liter Engines (SAE 5W-20, API Certified) U.S. 20 Gallons Metric 76 Liters 5.0 qts 4.7 Liters 13.4 qts 12.6 Liters Cooling System * 3.3 & 3.8 Liter Engines (Mopar威 Antifreeze/Coolant 5 Year/ 100,000 Mile Formula or equivalent) * Includes heater and coolant recovery bottle filled to MAX level. * Add 2.9 quarts (2.8 liters) if equipped with a rear heater.
MAINTAINING YOUR VEHICLE 445 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Oil Filter 3.3/3.8 liter engines Spark Plugs Fuel Selection Fluids, Lubricants and Genuine Parts Mopar威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent Use API Certified SAE 5W-20 engine oil. Refer to your oil filler cap for correct SAE grade, meeting DaimlerChrysler Material Standard MS-6395. Mopar 5281090 or equiv.
MAINTAINING YOUR VEHICLE Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir Fluids, Lubricants and Genuine Parts. Mopar威 ATF+4 Automatic Transmission Fluid Mopar威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids.
MAINTENANCE SCHEDULES CONTENTS M A I N T E N A N C E 䡵 Emission Control System Maintenance . . . . . . . . 448 ▫ Schedule “B” . . . . . . . . . . . . . . . . . . . . . . . . 451 䡵 Maintenance Schedules . . . . . . . . . . . . . . . . . . . 448 ▫ Schedule “A” . . . . . . . . . . . . . . . . . . . . . . . .
M A I N T E N A N C E 448 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
MAINTENANCE SCHEDULES • Taxi, police, or delivery service (commercial service).〫 • Off-road or desert operation. NOTE: Most vehicles are operated under the conditions listed for Schedule ⬙B⬙. Second is Schedule “A”. It is for vehicles that are not operated under any of the conditions listed under Schedule ⬙B⬙. Use the schedule that best describes your driving conditions. Where time and mileage are listed, follow the interval that occurs first.
M A I N T E N A N C E S C H E D U L E S 8 450 MAINTENANCE SCHEDULES • Check all lights and all other electrical items for correct operation. • Inspect the brake hoses. At Each Oil Change • Inspect the CV joints and front suspension components. • Change the engine oil filter. • Check the automatic transmission fluid level. • Inspect the exhaust system. • Check the coolant level, hoses, and clamps.
SCHEDULE “B” SCHEDULE “B” Follow schedule “B” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 60,000 miles (96 000 km) if the vehicle is usually operated under one or more of the conditions marked with an 〫. • Day or night temperatures are below 32° F (0° C). 451 M A I N T • Short trips of less than 10 miles (16 km).
M 452 SCHEDULE “B” A I N Miles T (Kilometers) E N Change engine oil and engine oil filter. A Rotate Tires N C Inspect the brake linings. E Inspect the engine air cleaner filter, replace if S C H E D U L E S 8 necessary. * Replace the engine air cleaner filter. * Replace the air conditioning filter.
SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter. Rotate Tires Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Inspect the PCV valve and replace as necessary.* Replace the air conditioning filter.
M 454 SCHEDULE “B” A I N Miles T (Kilometers) E N Change engine oil and engine oil filter. A Rotate Tires N C Inspect the brake linings. E Inspect the engine air cleaner filter, replace if S C H E D U L E S 8 necessary. * Replace the engine air cleaner filter. * Replace the air conditioning filter.
SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter. Rotate Tires Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Inspect the PCV valve and replace if necessary.* Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary. ‡ Change the automatic transmission fluid and filter. 〫 Replace the air conditioning filter.
M 456 SCHEDULE “B” A I N Miles T (Kilometers) E N Change engine oil and engine oil filter. A Rotate Tires N C Inspect the brake linings. E Inspect the engine air cleaner filter, replace if S C H E D U L E S 8 necessary. * Replace the engine air cleaner filter Replace the spark plugs on 3.3 liter and 3.8 liter engines. Replace the ignition cables 3.3 liter and 3.8 liter engines. Inspect the tie rod ends and boot seals. Check the PCV valve and replace if necessary. Not required if previously changed.
SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter. Rotate Tires Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter * Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary. ‡ Flush and replace the engine coolant. Replace the air conditioning filter.
M 458 SCHEDULE “B” A I N Miles T (Kilometers) E N Change engine oil and engine oil filter. A Rotate Tires N C Inspect the brake linings. E Inspect the engine air cleaner filter, replace if necesS C H E D U L E S 8 sary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Inspect the PCV valve and replace as necessary.* Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary. ‡ Change the automatic transmission fluid and filter.
SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter. Rotate Tires Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary. ‡ Replace the air conditioning filter.
M 460 SCHEDULE “B” A I N Miles T (Kilometers) E N Change engine oil and engine oil filter. A Rotate Tires N C Inspect the brake linings. E Inspect the engine air cleaner filter, replace if necessary. * S C H E D U L E S 8 Replace the engine air cleaner filter. Replace the spark plugs on 3.3 liter and 3.8 liter engines. Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary. ‡ Inspect the tie rod ends and boot seals. Inspect the PCV valve and replace as necessary.
SCHEDULE “A” 461 M SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Rotate Tires Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Replace the air conditioning filter.
M 462 SCHEDULE “A” A I N Miles T (Kilometers) E N [Months] A Change engine oil and engine oil filter. N C Rotate Tires E Inspect the brake linings. S C H E D U L E S 8 Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Check the PCV valve and replace, if necessary.* Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary.
SCHEDULE “A” 463 M Miles 78, 000 84, 000 90, 000 96, 000 100, 000 (Kilometers) (130 000) (140 000) (150 000) (160 000) (165 000) [Months] [78] [84] [90] [96] Change engine oil and engine oil filter. X X X X Rotate Tires X X X X Inspect the brake linings. X Inspect the engine air cleaner filter, replace if necessary. * X X X X Replace the engine air cleaner filter. X Inspect the tie rod ends and boot seals. X Check and replace the PCV valve , if necessary.* X Inspect the serpentine drive belt on 3.
M 464 SCHEDULE “A” A I N Miles T (Kilometers) E N [Months] A Change engine oil and engine oil filter. N C Rotate Tires E Inspect the brake linings. S C H E D U L E S 8 Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Check the PCV valve and replace, if necessary.* Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary.
SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Rotate Tires Inspect the brake linings. Inspect the engine air cleaner filter, replace if necessary. * Replace the engine air cleaner filter. Inspect the tie rod ends and boot seals. Check the PCV valve and replace, if necessary.* Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary. ‡ Replace the air conditioning filter.
M 466 SCHEDULE “A” A I WARNING! N T E You can be badly injured working on or around a N motor vehicle. Do only that service work for which A you have the knowledge and the right equipment. If N C you have any doubt about your ability to perform a E S C H E D U L E S 8 service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . 468 ▫ Prepare For The Appointment . . . . . . . . . . . . 468 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 468 䡵 Reporting Safety Defects . . . . . . . . . . . . . . . . . . 471 ▫ In Canada . . . . . . . . . . . . . . . . . . . . . . . . . . 471 䡵 Publication Order Forms . . . . . . . . . . . . . . . . . . 472 ▫ Be Reasonable With Requests .
IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty, discuss additional charges with the service manager. Keep a maintenance log of your vehicle’s service history. This can often provide a clue to the current problem.
IF YOU NEED CONSUMER ASSISTANCE technicians, special tools, and the latest information to assure your vehicle is fixed correctly and in a timely manner. This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its Customer Center. Any hearing or speech impaired customer who has access to a TDD or a conventional teletypewriter (TTY) in the United States can communicate with the manufacturer by dialing 1–800–380–CHRY.
IF YOU NEED CONSUMER ASSISTANCE WARRANTY INFORMATION (U.S. Vehicles Only) See the Warranty Information Booklet for the terms and provisions of DaimlerChrysler’s warranties applicable to this vehicle. MOPAR姞 PARTS Mopar威 fluids, lubricants, parts, and accessories are available from your dealer. They will help you keep your vehicle operating at its best. REPORTING SAFETY DEFECTS In the 50 United States and Washington D.C.
IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below. Visa, Mastercard, American Express, and Discover orders are accepted. If you prefer mailing your payment, please call for an order form. NOTE: A street address is required when ordering manuals. (No P.O. Boxes). • Service Manuals.
IF YOU NEED CONSUMER ASSISTANCE Call Toll Free at: • 1–800–890–4038 (U.S.) • 1–800–387–1143 (Canada) Or Visit us on the World Wide Web at: • www.techauthority.daimlerchrysler.com • www.daimlerchrysler.ca/manuals DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories established by the National highway Traffic Safety Administration.
IF YOU NEED CONSUMER ASSISTANCE WARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10
INDEX Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 350 Adding Washer Fluid . . . . . . . . . . . . . . . . . . 304,415 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 348 Adjustable Pedals . . . . . . . . . . . . . . . . . . . . . . . 159 Air Conditioner Maintenance . . . . . . . . . . . . . . . 411 Air Conditioning . . . . . . . . . . . . . . . . . . . . . 280,285 Air Conditioning Controls . . . . . . . . . . . . . . . . . 280 Air Conditioning Filter . . . . . .
INDEX Interlock System . . . . . . . . . . . . . . . . . . . . . . . 314 Reset Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 315 Selection Of Lubricant . . . . . . . . . . . . . . . . 425,446 Shifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315 Special Additives . . . . . . . . . . . . . . . . . . . . . . 428 Automatic Transmission . . . . . . . . . . . . . . . . . . . 425 Adding Fluid . . . . . . . . . . . . . . . . . . . . . . . . . 426 Fluid and Filter Changes . . . . . . .
INDEX Caps, Filler Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350 Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . . . 405 Radiator (Coolant Pressure) . . . . . . . . . . . . . . . 419 Car Washes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429 Carbon Monoxide Warning . . . . . . . . . . . . . . . . . 349 Cargo Compartment Luggage Carrier . . . . . . . . . . . . . . . . . . . . . . . 195 Cargo (Vehicle Loading) . . . . . . . . . . . . . . . . . . .
INDEX Compass Variance . . . . . . . . . . . . . . . . . . . . . . . 166 Computer, Trip/Travel . . . . . . . . . . . . . . . . . . . . 167 Console, Overhead . . . . . . . . . . . . . . . . . . . . . . . 163 Console, Removable . . . . . . . . . . . . . . . . . . . 189,190 Contract, Service . . . . . . . . . . . . . . . . . . . . . . . . 470 Coolant Pressure Cap . . . . . . . . . . . . . . . . . . . . . 419 Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . 416 Adding Coolant (Antifreeze) . . .
INDEX Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Door Locks, Automatic . . . . . . . . . . . . . . . . . . . . 19 Door Opener, Garage . . . . . . . . . . . . . . . . . . . . . 173 Drive Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406 Drive Shaft Universal Joints . . . . . . . . . . . . . . . . 413 Driving On Slippery Surfaces . . . . . . . . . . . . . . . . . . . . 391 Electric Remote Mirrors . . . . . . . . . . . . . . . . . . . .
INDEX Temperature Gauge . . . . . . . . . . . . . . . . . . . . . 213 Exhaust Gas Caution . . . . . . . . . . . . . . 37,83,349,416 Exhaust System . . . . . . . . . . . . . . . . . . . . . . . . . 415 Extender, Seat Belt . . . . . . . . . . . . . . . . . . . . . . . . 53 Exterior Folding Mirrors . . . . . . . . . . . . . . . . . . . 93 Filters Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . 407 Air Conditioning . . . . . . . . . . . . . . . . . . . . 302,412 Automatic Transaxle . . . . . .
INDEX Octane Rating . . . . . . . . . . . . . . . . . . . . . . 346,445 Requirements . . . . . . . . . . . . . . . . . . . . . . 346,444 Tank Capacity . . . . . . . . . . . . . . . . . . . . . . . . 444 Fuel System Caution . . . . . . . . . . . . . . . . . . . . . 348 Fueling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350 Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 434 Garage Door Opener (HomeLink威) Gas Cap (Fuel Filler Cap) . . . . . . .
INDEX 483 Hitches Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . 357 HomeLink威 (Garage Door Opener) Transmitter . . . 173 Hood Release . . . . . . . . . . . . . . . . . . . . . . . . . . 147 Hook, Coat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421,425 Integrated Child Seat . . . . . . . . . . . . . . . . . . . . . . 69 Integrated Power Module . . . . . . . . . . . . . . . . . . 434 Interior Appearance Care .
INDEX Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . 43 LATCH (Lower Anchors and Tether for CHildren) . 74 Latches Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 Lead Free Gasoline . . . . . . . . . . . . . . . . . . . . . . 346 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339 Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85,148 Airbag . .
INDEX Reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 Rear Servicing . . . . . . . . . . . . . . . . . . . . . . . . 442 Rear Tail . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . 212 Security Alarm (Theft Alarm) . . . . . . . . . . . . . . 213 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 438,439 Service Engine Soon (Malfunction Indicator) . . . 215 Side Marker . . . . . . . . . . . . . . . . . .
INDEX Automatic Dimming . . . . . . . . . . . . . . . . . . . . . 92 Electric Remote . . . . . . . . . . . . . . . . . . . . . . . . 94 Exterior Folding . . . . . . . . . . . . . . . . . . . . . . . . 93 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Outside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Rearview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Vanity . . . . . . . .
INDEX Overheating, Engine . . . . . . . . . . . . . . . . . . . 213,369 Owner’s Manual (Operator Manual) . . . . . . . . . 4,472 Panic Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . . . 317 Parking On Hill . . . . . . . . . . . . . . . . . . . . . . . . . 317 Passing Light . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 Pedals, Adjustable . . . . . . . . . . . . . . . . . . . . . . . 159 Pets, Transporting . . . . . .
INDEX Radio Remote Controls . . . . . . . . . . . . . . . . . 264,276 Radio, Satellite . . . . . . . . . . . . . . . . . . . . . . . . . . 272 Radio (Sound Systems) . . . . . . . . . 219,229,239,249,256 Rear Air Conditioning . . . . . . . . . . . . . . . . . 288,297 Rear Cup Holder . . . . . . . . . . . . . . . . . . . . . . . . 184 Rear Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288 Rear Seat Removal . . . . . . . . . . . . . . . . . . . . 135,137 Rear Seating Flexibility . . . .
INDEX Schedule, Maintenance . . . . . . . . . . . . . . . . . . . . 448 Seat Belt Maintenance . . . . . . . . . . . . . . . . . . . . 433 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . . . 51 Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Adjustable Shoulder Belt . . . . . . . . . . . . . . . . . . 48 Adjustable Upper Shoulder Anchorage . . . . . . . . 48 And Pregnant Women . . . . . . . . . . . . . . . . . . . 53 Center Lap Belt . . . . . . . . . . . . . . . . . .
INDEX Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Signals, Turn . . . . . . . . . . . . . . . . . . . 153,210,440,442 Sliding Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Slippery Surfaces, Driving On . . . . . . . . . . . . . . . 391 Snow Chains (Tire Chains) . . . . . . . . . . . . . . . . . 343 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344 Spare Tire . . . . . . . . . . . . . . . . . . . . . 336,337,373,384 Spark Plugs . . . .
INDEX Temperature Gauge, Engine Coolant . . . . . . . 213,369 Tether Anchor, Child Restraint . . . . . . . . . . . . . . . 74 Theft Alarm (Security Alarm) . . . . . . . . . . . . . . . . 27 Theft System Arming . . . . . . . . . . . . . . . . . . . . . . 27 Theft System Disarming . . . . . . . . . . . . . . . . . . . . 27 Theft System (Security Alarm) . . . . . . . . . . . . . . . 27 Tilt Steering Column . . . . . . . . . . . . . . . . . . . . . 156 Tire and Loading Information Placard . . . . . . . . .
INDEX Disabled Vehicle . . . . . . . . . . . . . . . . . . . . . . . 393 Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357 Recreational . . . . . . . . . . . . . . . . . . . . . . . 366,394 Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357 Traction Control . . . . . . . . . . . . . . . . . . . 156,215,322 Traction Control Switch . . . . . . . . . . . . . . . . . 156,322 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . 354 Cooling System Tips .
INDEX Vanity Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Variance, Compass . . . . . . . . . . . . . . . . . . . . . . . 166 Vehicle Certification Label . . . . . . . . . . . . . . . . . 352 Vehicle Identification Number (VIN) . . . . . . . . . . . . 6 Vehicle Information Center . . . . . . . . . . . . . . . . . 168 Vehicle Loading . . . . . . . . . . . . . . . . . . . 329,352,353 Vehicle Modifications/Alterations . . . . . . . . . . . . . . 7 Vehicle Storage . . . . . . . . . . . . .
INDEX
NOTES
NOTES