2008 300 SRT8 2008 OWNER’ S MANUAL 81-026-0848 First Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number . . . . . . . . . . . . . . . 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Modifications / Alterations . . . . . . . . . . . 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION This manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a Warranty Information Booklet and various customer-oriented documents. You are urged to read these publications carefully. Following the instructions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions. VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is on the left front corner of the instrument panel.
INTRODUCTION 7 VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . .12 ▫ General Information . . . . . . . . . . . . . . . . . . . .18 ▫ Wireless Ignition Node (WIN) . . . . . . . . . . . . .12 䡵 Security Alarm System — If Equipped . . . . . . . . .18 ▫ FOB With Integrated Key . . . . . . . . . . . . . . . . .13 ▫ Rearming Of The System . . . . . . . . . . . . . . . . .18 ▫ Tip Start Feature . . . . . . . . . . . . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ To Unlatch The Trunk . . . . . . . . . . . . . . . . . . .22 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . .36 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . .22 䡵 Trunk Lock And Release . . . . . . . . . . . . . . . . . . .37 ▫ Programming Additional Transmitters . . . . . . . .23 䡵 Trunk Safety Warning . . . . . . . . . . . . . . . . . . . . .38 ▫ Transmitter Battery Service . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Driver And Front Passenger Supplemental Restraint System (SRS) - Airbag . . . . . . . . . . . .49 ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . .62 ▫ Child Restraint . . . . . . . . . . . . . . . . . . . . . . . .64 䡵 Break-In Recommendations . . . . . . . . . . . . . . . . .73 䡵 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 ▫ Transporting Passengers . . . . . . . . . . . . . . . . .74 11 ▫ Lock Your Vehicle . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Fob with Integrated Key and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the double-sided integrated key into the ignition switch with either side up. Wireless Ignition Node (WIN) The Wireless Ignition Node (WIN) operates similarly to an ignition switch.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Fob with Integrated Key The Fob with Integrated Key operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and a valet key, which stores in the rear of the Fob. 2 The valet key allows for entry into the vehicle should the battery in the vehicle or the Fob go dead. The valet key is also for locking the glove box. You can keep the valet key with you when valet parking.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Tip Start Feature Do not press the accelerator. Use the Fob with Integrated Key to briefly turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. Ignition Key Removal Place the shift lever in PARK. Turn the key to the LOCK position and then remove the key.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key-In-Ignition Reminder If you open the driver’s door and the key is in the ignition, a chime will sound to remind you to remove the key. NOTE: The Key-In-Ignition reminder only sounds when the ignition key is placed in the LOCK or ACC position. SENTRY KEY姞 IMMOBILIZER SYSTEM The Sentry Key威 prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • The Sentry Key威 Immobilizer System is not compatible with aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. • Exxon/Mobil SpeedPass™, additional fobs, or any other transponder-equipped components on the same key chain will not cause a fault unless the additional part is physically held against the fob being used to start the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE procedure. This procedure consists of programming a blank fob to the vehicle electronics. A blank fob is one that has never been programmed. NOTE: When having the Sentry Key威 Immobilizer System serviced, bring all vehicle fobs with you to the authorized dealer. Customer Sentry Key姞 (Fob) Programming If you have two valid Sentry Keys威, you can program new Sentry Keys威 to the system by performing the following steps: 1.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If a programmed key is lost, see your authorized dealer to have all remaining keys erased from the system’s memory. This will prevent the lost key from starting your vehicle. The remaining keys must then be reprogrammed. All vehicle keys must be taken to an authorized dealer at the time of service to be reprogrammed. General Information The Sentry Key威 System complies with FCC rules Part 15 and with RSS-210 of Industry Canada.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Arm the System Remove the key from the ignition switch and either press a power door LOCK switch while the driver or passenger door is open or press the LOCK button on the Remote Keyless Entry (RKE) transmitter. After the last door is closed, or if all doors are closed, the system will arm itself in about 16 seconds. During that time, the Vehicle Security Alarm Indicator Light will flash. If it does not illuminate, the system is not arming.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the alarm system is armed and the battery becomes disconnected the system will remain armed when the battery is reconnected. The exterior lights will flash, the horn will sound, and the ignition will not start the vehicle. If this occurs, disarm the system. NOTE: • None of the courtesy lights will operate if the dimmer control is in the “defeat” position (extreme downward position), unless the overhead map/reading lights are turned on manually.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 Remote Key Unlock, Driver Door/All Doors First This feature lets you program the system to unlock either the driver’s door or all doors on the first press of the UNLOCK button on the transmitter. For details, refer to “Remote Key Unlock,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Turn Headlights On with Remote Key Unlock This feature activates the headlights for up to 90 seconds when the doors are unlocked with the transmitter. The time for this feature is programmable. For details, refer to “Turn Headlights On with Remote Key Unlock,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • The interior lights will turn off if you turn the ignition switch to the ACC or ON position while the Panic Alarm is activated. However, the exterior lights and horn will remain on. • You may need to be less than 35 ft (11 m) from the vehicle when using the transmitter to turn off the Panic Alarm due to the radio frequency noises emitted by the system. Programming Additional Transmitters Refer to Sentry Key威, “Customer Sentry Key威 (Fob) Programming.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. Battery Replacement 2. Remove and replace the batteries. Avoid touching the new batteries with your fingers.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Closeness to a radio transmitter such as a radio station tower, airport transmitter, and some mobile or CB radios. • HAZARD switch off REMOTE STARTING SYSTEM — IF EQUIPPED This system uses the Remote Keyless Entry (RKE) transmitter to start the engine conveniently from outside the vehicle while still maintaining security. The system has a targeted range of 328 ft (100 m).
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For security, power window and power sunroof operation (if so equipped) are disabled when the vehicle is in the REMOTE START mode. equipped). Then, prior to the end of the 15 minute cycle, insert the key into the ignition switch and turn the switch to the ON position. • The engine can be started two consecutive times (two 15 minute cycles) with the RKE transmitter.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 To Turn Off the Engine While in REMOTE START Mode Press and release the REMOTE START button one time. 2 NOTE: To avoid inadvertent shut downs, the system will disable the one time press of the REMOTE START button for two seconds after receiving a valid REMOTE START request. DOOR LOCKS Manual Door Locks To lock each door, push the door LOCK plunger on each door trim panel downward.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors before you drive as well as when you park and leave the vehicle. Power Door Locks A power door LOCK switch is on each front door trim panel. Use this switch to lock or unlock the doors. • When leaving the vehicle, always remove the key from the ignition and lock your vehicle. Unsupervised use of vehicle equipment may cause severe personal injuries and death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you press the power door LOCK switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you from accidentally locking the key in the vehicle. Removing the key or closing the door will allow the locks to operate. If a door is open, the key is in the ignition, and the ignition is in the LOCK or ACC position, a chime will sound as a reminder to remove the key.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Unlock Doors on Exit The doors will unlock automatically on vehicles with power door locks if: 1. The Automatic Unlock Doors On Exit feature is enabled 2. The transmission was in gear and the vehicle speed returned to 0 mph (0 km/h) 3. The transmission is in NEUTRAL or PARK 4. The driver door is opened 5. The doors were not previously unlocked, and 6. The vehicle speed is 0 mph (0 km/h).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Engage the Child Protection Door Lock System 1. Open the rear door. 2. Insert the tip of the valet key (or alike) into the child lock control and pull it upward. 31 NOTE: When the Child Protection Door Lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position. WARNING! Avoid trapping anyone in a vehicle in a collision.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For emergency exit with the system engaged, move the door LOCK switch to the UNLOCK position, roll down the window and open the door with the outside door handle. To Disengage the Child Protection Door Lock System 1. Open the rear door. 2. Insert the tip of the valet key (or alike) into the child lock control and pull it downward. Child Lock Control 3. Repeat Steps 1 and 2 for the opposite rear door.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS Power Windows The window controls on the driver’s door control all the door windows. 33 There are single window controls on each passenger door trim panel, which operate the passenger door windows. The window controls will operate only when the ignition switch is in the ON or ACC position. WARNING! Never leave children in a vehicle with the key in the ignition switch.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE AUTO-Down Feature The driver door power WINDOW switch and some model passenger door power WINDOW switches have an AUTO-down feature. Press the WINDOW switch to the second detent, release, and the window will go down automatically. time for this feature is programmable. Refer to “Delay Power Off to Accessories Until Exit,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The power WINDOW switches will remain active for up to 60 minutes after the ignition switch is turned off. Opening either front door will cancel this feature. The time for this feature is programmable. Refer to “Delay Power Off to Accessories Until Exit,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Pull the WINDOW switch up to close window completely and continue to hold the switch up for an additional two seconds after the window is closed. 2. Push the WINDOW switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open. Window LOCKOUT Switch Reset Anytime the vehicle battery is disconnected or goes dead, the AUTO-up function will be disabled.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE TRUNK LOCK AND RELEASE The trunk lid can be released from inside the vehicle by pressing the TRUNK RELEASE Button located on the instrument panel to the left of the steering wheel. NOTE: The transmission must be in PARK before the switch will operate. 37 The trunk lid can be released from outside the vehicle by pressing the TRUNK button on the Remote Keyless Entry (RKE) transmitter twice within five seconds.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE TRUNK SAFETY WARNING Trunk Emergency Release WARNING! Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended. Once in the trunk, young children may not be able to escape, even if they entered through the rear seat. If trapped in the trunk, children can die from suffocation or heat stroke.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE OCCUPANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems. These include the front and rear seat belts for the driver and all passengers, the front airbags for both the driver and front passenger, the optional supplemental side curtain airbags for the driver and passengers seated next to a window, and the optional supplemental front seat mounted side airbags.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seating positions in your vehicle are equipped with lap/shoulder belts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the front seat. 2 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. 43 WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 In the rear seat, move toward the center of the seat to position the belt away from your neck. Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Pretensioners The seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove any slack from the seat belts in the event of a collision. These devices improve the performance of the seat belt system by assuring that the belt is tight around the occupant in a collision. Pretensioners work for all size occupants, including those in child restraints.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 1. With all doors closed, and the ignition switch in any position except ON or START, buckle the driver’s seat belt. 4. Turn the ignition switch to the LOCK position. A single chime will sound to signify that you have successfully completed the programming. 2. Turn the ignition switch to the ON position, but do not start the engine. Wait for the Seat Belt Reminder Light to turn off and then proceed to the next step.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will here a clicking sound. This indicates the safety belt is now in the Automatic Locking mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug and in the recommended seating positions. Remove and store the extender when not needed. Driver and Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt restraint systems.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The front airbags have a multistage inflator design. This may allow the airbag to have different rates of inflation that are based on collision severity. WARNING! • Do not put anything on or around the front airbag covers or attempt to open them. You may damage the airbags and you could be injured because the airbags are no longer functional. These protective covers for the airbag cushions are designed to open only when the airbags are inflating.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 If the vehicle is equipped with supplemental front seat mounted side airbags, they are marked with an SRS label sewn into the outboard side of the seat. Window Airbag NOTE: Airbag covers may not be obvious in the interior trim, but they will open to allow airbag deployment.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • If your vehicle is equipped with supplemental front seat mounted side airbags, do not use accessory seat covers or place objects between you and the seat airbags; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury. • If your vehicle is equipped with supplemental front seat mounted side airbags, do not attach cupholders or any other objects on or around the door.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some simple steps you can take to minimize the risk of harm from a deploying airbag. 1. Children 12 years old and younger should ride buckled up in the rear seat. WARNING! Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger front airbag. An airbag deployment could cause severe injury or death to infants in that position. 2.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 8. If your vehicle has supplemental side curtain airbags and/or supplemental front seat mounted side airbags, do not lean against the door, as the airbags will inflate forcefully into the space between you and the door. 9. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided in the ⬙If You Need Customer Assistance⬙ section.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag System Components The airbag system consists of the following: • Occupant Restraint Controller (ORC) • Side Remote Acceleration Sensors (if equipped) • Airbag Warning Light • Driver Airbag • Front Passenger Airbag • Supplemental Side Curtain Airbags above side windows (if equipped) • Supplemental Front Seat Mounted Side Airbags (if equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting Wiring 55 • Seat Belt Reminder Light • Knee Impac
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The ORC also monitors the readiness of the electronic parts of the system whenever the ignition switch is in the START or ON positions. These include all of the items listed above except the knee bolster, the instrument panel, and the steering wheel and column. If the key is in the LOCK position, in the ACC position, or not in the ignition, the airbags are not on and they will not inflate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE separate and fold out of the way as the bags inflate to their full size. The bags fully inflate in about 50 to 70 ms. This is about half of the time that it takes to blink your eyes. The bags then quickly deflate while helping to restrain the driver and front passenger. The driver’s front airbag gas is vented through vent holes in the sides of the airbag. The passenger’s front airbag gas is vented through vent holes in the sides of the airbag.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE seam in the seat’s trim cover and opens into the space between the occupant and the door. The airbag inflates at a very high speed and with enough force to injure you if you are not belted and seated properly, or if items are positioned in the area where the front seat mounted side airbag inflates. This especially applies to children.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Unapproved modifications or service procedures to the front seat assembly, its related components, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the driver or front seat passenger if the vehicle is involved in an accident. A modified vehicle may not comply with required Federal Motor Vehicle Safety Standards (FMVSS).
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • As the airbags deflate, you may see some smoke-like particles. The particles are a normal by-product of the process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation continues, see your doctor.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. You could be injured because the airbags are not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper passenger side of the instrument panel. Do not modify the front bumper, vehicle body structure, or frame.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Event Data Recorder (EDR) In the event of an accident, your vehicle is designed to record up to five seconds of specific vehicle data parameters (see the following list) in an event data recorder prior to the moment of airbag deployment, or near deployment, and up to a quarter second of high-speed deceleration data during and/or after airbag deployment. EDR data are ONLY recorded if an airbag deploys, or nearly deploys, and are otherwise unavailable.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 may be released for incorporation in aggregate crash databases, such as those maintained by the US government and various states. Data of a potentially sensitive nature, such as would identify a particular driver, vehicle, or crash, will be treated confidentially.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Traction/stability control status • Tire Pressure Monitoring System status (if equipped) Child Restraint Everyone in your vehicle needs to be buckled up all the time, including babies and children. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants and Child Restraints • Safety experts recommend that children ride rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types of child restraints can be used rearward-facing, infant carriers and convertible child seats. • The infant carrier is only used rearward-facing in the vehicle. It is recommended for children who weigh up to about 20 lbs (9 kg).
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who are still too small to fit the vehicle’s seat belts properly. If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seatback, they should use a belt-positioning booster seat. The child and beltpositioning booster seat are held in the vehicle by the lap/shoulder belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. • A rearward-facing child restraint should only be used in a rear seat.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH — Child Seat Anchorage System (Lower Anchors and Tether for CHildren) Your vehicle’s rear seat is equipped with the child restraint anchorage system called LATCH. The LATCH system provides for the installation of the child restraint without using the vehicle’s seat belts, instead securing the child restraint using lower anchorages and upper tether straps from the child restraint to the vehicle structure.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Again, carefully follow the installation instructions that are provided with the child restraint system. The rear seat lower anchorages are round bars located at the rear of the seat cushion where it meets the seatback and are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE means of adjusting the tension in the strap. Forwardfacing toddler restraints and some rear-facing infant restraints will also be equipped with a tether strap, a hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap. You will first loosen the adjusters on the lower straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchorages.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle end belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Transporting Pets Airbags deploying in the front seat could harm your pet.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The engine oil, transmission fluid, and axle lubricant installed at the factory is high-quality and energyconserving. Oil, fluid, and lubricant changes should be consistent with anticipated climate and conditions under which vehicle operations will occur. The recommended viscosity and quality grades is shown in Section 7. CAUTION! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lock Your Vehicle Always remove the key from the ignition and lock all doors when leaving the vehicle unattended, even in your own driveway or garage. Try to park your vehicle in a well-lit area and never invite theft by leaving articles of value exposed. Exhaust Gas Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO), follow the safety tips below. • If you are required to drive with the trunk open, make sure that all windows are closed and the climate control BLOWER switch is set at high speed. DO NOT use the recirculation mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Periodic Safety Checks You Should Make Outside The Vehicle Tires Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 3 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 ▫ Illuminated Vanity Mirrors . . . . . . . . . . . . . . . .88 ▫ Automatic Dimming Inside Mirror . . . . . . . . . .84 䡵 Hands-Free Communication (UConnect威) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . .85 ▫ Exterior Mirrors Folding Feature — If Equipped . . . . . . . . . . . . . . . . .
80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Voice Recognition System (VR) — If Equipped . . 115 ▫ Voice Recognition System (VR) Operation . . . . 115 ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . . . 116 ▫ Voice Training . . . . . . . . . . . . . . . . . . . . . . . . 119 ▫ Linking And Unlinking The Remote Keyless Entry (RKE) Transmitter To The Memory Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 ▫ Memory Position Recall . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 ▫ Lights-On Reminder . . . . . . . . . . . . . . . . . . . 136 䡵 Headlight Washers — If Equipped . . . . . . . . . . . 145 ▫ Fog Lights . . . . . . . . . . . . . . . . . . . . . . . . . . 137 ▫ Adding Washer Fluid . . . . . . . . . . . . . . . . . . 146 ▫ Multifunction Lever . . . . . . . . . . . . . . . . . . . 137 䡵 Power Tilt/Telescoping Steering Column . . . . . . 147 ▫ Overhead Console Map/Reading Lights . . . . . 138 䡵 Adjustable Pedals . . . . .
82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Adaptive Cruise Control (ACC) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 ▫ Adaptive Cruise Control (ACC) Operation . . . 155 ▫ Activating Adaptive Cruise Control (ACC) . . . 156 ▫ To Activate . . . . . . . . . . . . . . . . . . . . . . . . . . 156 ▫ To Set a Desired Speed . . . . . . . . . . . . . . . . . 157 ▫ To Cancel . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 ▫ To Turn Off . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 ▫ Troubleshooting Tips . . . . . . . . . . . . . . . . . . . 183 ▫ Ignition Off Operation . . . . . . . . . . . . . . . . . . 186 ▫ General Information . . . . . . . . . . . . . . . . . . . 183 ▫ Sunroof Fully Closed . . . . . . . . . . . . . . . . . . . 186 䡵 Power Sunroof — If Equipped . . . . . . . . . . . . . 184 䡵 Electrical Power Outlets . . . . . . . . . . . . . . . . . . 187 ▫ Opening Sunroof - Express . . . . . . . . . . . . . .
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Automatic Dimming Inside Mirror This mirror automatically adjusts for annoying headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light next to the button will illuminate to indicate when the dimming feature is activated.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 CAUTION! WARNING! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. Vehicles and other objects seen in the passenger-side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger-side convex mirror could cause you to collide with another vehicle or other object.
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver’s-Side Outside Mirror Auto Dimmer This mirror automatically adjusts for annoying headlight glare from vehicles behind you. You can turn this feature on or off by pressing the button at the base of the inside rearview mirror. The ⬙Tilt in Reverse⬙ feature can be enabled or disabled. Refer to “Tilt Mirrors Down in Reverse,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE After selecting a mirror, move the knob in the same direction you want the mirror to move. Use the center off position to guard against accidentally moving a mirror position. 87 NOTE: For vehicles equipped with Driver Memory Seat, you can use your Remote Keyless Entry (RKE) Transmitter or the MEMORY switch on the driver’s door trim panel to return the power mirrors to preprogrammed positions. Refer to “Driver Memory Seat” in this section.
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Illuminated Vanity Mirrors An illuminated vanity mirror is on the sun visor. To use the mirror, rotate the sun visor downward and swing the mirror cover upward. The light turns on automatically. Closing the mirror cover turns off the light. HANDS-FREE COMMUNICATION (UConnect姞) — IF EQUIPPED NOTE: The sales code RER radio contains an integrated Hands-Free Communication (UConnect威) system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: For UConnect威 customer support, visit the following websites: • www.chrysler.com/uconnect • www.dodge.com/uconnect • www.jeep.com/uconnect • or call 1–877–855–8400 UConnect威 allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The UConnect威 phonebook enables you to store up to 32 names, with four numbers per name.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Recognition Button Actual button location may vary with radio. The individual buttons are described in the “Operation” section. The UConnect威 system can be used with any Hands-Free Profile certified Bluetooth威 cellular phone. See the UConnect威 website for supported phones. If your cellular phone supports a different profile (e.g., Headset Profile) you may not be able to use any UConnect威 features.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For each feature explanation in this section, only the combined form of the voice command is given. You can also break the commands into parts and say each part of the command when you are asked for it. For example, you can use the combined form voice command ⬙Phonebook New Entry,⬙ or you can break the combined form command into two voice commands: ⬙Phonebook⬙ and ⬙New Entry.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The following are general phone to UConnect威 system pairing instructions: • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Setup Phone Pairing.⬙ • When prompted, after the beep, say ⬙Pair a Phone⬙ and follow the audible prompts. • You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to enter into your cellular phone. You can enter any four-digit PIN number.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Dial by Saying a Number Call by Saying a Name • Press the PHONE button to begin. • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Dial.⬙ • After the ⬙Ready⬙ prompt and the following beep, say “Call.⬙ • The system will prompt you to say the number you want to call. • The system will prompt you to say the name of the person you want to call. • For example, you can say ⬙234-567-8901.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Add Names to Your UConnect威 Phonebook NOTE: Adding names to the phonebook is recommended when the vehicle is not in motion. • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Phonebook New Entry.⬙ • When prompted, say the name of the new entry. Use of long names helps the voice recognition and it is recommended. For example, say ⬙Robert Smith⬙ or ⬙Robert⬙ instead of ⬙Bob.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Object Exchange Profile (OBEX). Please see your phone Owner’s Manual for specific instructions on how to send these entries from your phone. Edit Entries in the UConnect威 Phonebook NOTE: • The phone handset must support Bluetooth威 OBEX transfers of phonebook entries to use this feature. • Press the PHONE button to begin.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ⬙Phonebook Edit⬙ can be used to add another phone number to a name entry that already exists in the phonebook. For example, the entry John Doe may have a mobile and a home number, but you can add ”John Doe’s” work number later using the ⬙Phonebook Edit⬙ feature. Delete Entries in the UConnect威 Phonebook NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. • Press the PHONE button to begin. from which you choose.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 • After confirmation, the phonebook entries will be deleted. • The UConnect威 system will then prompt you as to the number designation you wish to call. • Note that only the phonebook in the current language is deleted. • The selected number will be dialed. List All Names in the UConnect威 Phonebook • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Phonebook List Names.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the call, press and hold the PHONE button until you hear a single beep, indicating that the incoming call was rejected. Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone. Press the PHONE button to place the current call on hold and answer the incoming call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Conference Call When two calls are in progress (one active and one on hold), press and hold the PHONE button until you hear a double beep indicating that the two calls have been joined into one conference call. there is a call on hold, it will become the new active call. If the active call is terminated by the far end, a call on hold may not become active automatically. This is cell phone-dependent.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Call Continuation Call continuation is the progression of a phone call on the UConnect威 system after the vehicle ignition key has been switched to OFF.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 Emergency Assistance If you are in an emergency and the mobile phone is reachable: and Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area. • Pick up the phone and manually dial the emergency number for your area. The UConnect威 system does slightly lower your chances of successfully making a phone call as to that for the cell phone directly.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Towing Assistance number dialed is based on the country where the vehicle is purchased (1-800-5282069 for the U.S., 1-877-213-4525 for Canada, 55-14-3454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico). Please refer to the 24-Hour “Towing Assistance” coverage details in the Warranty Information Booklet and on the 24–Hour Towing Assistance Card. Paging To learn how to page, refer to ⬙Working with Automated Systems.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE sequence of numbers, followed by ⬙Send,⬙ is also to be used for navigating through an automated customer service center menu structure, and to leave a number on a pager. You can also send stored UConnect威 phonebook entries as tones for fast and easy access to voice mail and pager entries. To use this feature, dial the number you wish to call and then press the “Voice Recognition” button and say, “Send.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the ⬙Ready⬙ prompt and the following beep, say ⬙Setup Confirmations.⬙ The UConnect威 system will play the current confirmation prompt status and you will be given the choice to change it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 • Following the beep, say ⬙Mute off.⬙ If you would like to connect or disconnect the Bluetooth威 connection between a UConnect威 paired cellular phone and the UConnect威 system, follow the instructions described in your cellular phone User’s Manual.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Select Another Cellular Phone This feature allows you to select and start using another phone paired with the UConnect威 system. • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Setup Select Phone⬙ and follow the prompts. • You can also press the “Voice Recognition” button at any time while the list is being played, and then choose the phone that you wish to select.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 system Voice Training feature may be used. To enter this training mode, follow one of the two following procedures: To restore the voice recognition system to factory default settings, enter the Voice Training session via the above procedure and follow the prompts. From outside the UConnect威 mode (e.g.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, French, and Spanish accents, the system may not always work for some. • When navigating through an automated system such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say ⬙Send.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • smooth road surface, • fully closed windows, • dry weather conditions, and • operation from the drivers seat. • Performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the UConnect威 system. • Echo at the far end can sometimes be reduced by lowering the in-vehicle audio volume. • In a convertible vehicle, system performance may be compromised with the convertible top down.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 3
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 113 3
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call UConnect威 Tutorial try again voice training work yes
UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. 115 possible.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you ever wish to interrupt the system while it lists options, press the VR hard-key, listen for the beep, and say your command. The system will best recognize your speech if the windows are closed, and the heater/air-conditioning fan is set to low. Pressing the VR hard-key while the system is speaking is known as “barging in.” The system will be interrupted and you can add or change commands. This will become helpful once you start to learn the options.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Use the ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level while the voice recognition system is speaking. Please note the volume setting for VR is different then the audio system. • NEXT STATION (to select the next station) Main Menu Start a dialogue by pressing the VR hard-key. You may say MAIN MENU to switch to the main menu.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Satellite Radio To switch to satellite radio mode say SAT or SATELLITE RADIO.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE − CONTINUE (to continue recording) − DELETE (to delete the recording) • PLAY MEMOS (to play previously recorded memos) — During the playback you may press the VR hardkey to stop playing memos.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SEATS Power Seats The power SEAT switch is on the outboard side of the seat near the floor. Use this switch to move the driver’s seat up or down, forward or rearward, or to tilt the seat. The passenger’s seat will move up or down, forward or rearward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. 121 Power Reclining Seats The recliner control is located on the outboard side of the seat. 3 CAUTION! Do not place any article under a power seat as it may cause damage to the seat controls.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked. Lumbar Support This feature allows you to increase or decrease the amount of lumbar support. Turn the control lever forward to increase and rearward to decrease the desired amount of lumbar support.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Adjust the restraint so that the upper edge is as high as practical. To raise it, pull upward on the head restraint. To lower it, depress the button on the post guide and push downward on the head restraint.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Seats Heated seats provide comfort and warmth on cold days and can help soothe sore muscles and backs. The heaters provide the same heat level for both cushion and back. The driver seat and front passenger seat are heated. The controls for each heater are located near the bottom center of the instrument panel. After turning on the ignition, you can choose from High, Off, or Low heat settings.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE LEDs changes from two to one, indicating the change. Operation on the low setting also turns off automatically after 30 minutes. 125 Folding Rear Seat NOTE: Once a heat setting is selected, heat will be felt within two to five minutes.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap. WARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 1. Adjust all memory profile settings to desired preferences (i.e., seat, side mirror, adjustable pedals, power tilt and telescopic steering column, and radio station presets). 2. Press and release the SET (S) button on the MEMORY switch, then press the side of the rocker switch labeled (1) within five seconds. The Electronic Vehicle Information Center (EVIC) will display which memory position is being set.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Press and release the SET (S) button on the MEMORY switch, then press the side of the rocker switch labeled (2) within five seconds. The EVIC will display which memory position is being set. NOTE: Memory profiles can be set without the vehicle in PARK, but the vehicle must be in PARK to recall a memory profile. NOTE: The Recall Memory with Remote Key Unlock feature can be enabled or disabled.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Your transmitters can be unlinked to your memory settings by pressing the SET (S) button followed by the UNLOCK button on the transmitter in Step 4 above. Memory Position Recall NOTE: The vehicle must be in PARK to recall memory positions. If a recall is attempted when the vehicle is not in PARK, a message will display in the EVIC.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you remove the key from the ignition switch, the driver seat will move about 2.4 in (60 mm) rearward if the driver seat position is greater than or equal to 2.7 in (67.7 mm) forward of the rear stop. The seat will return to its previously set position when you insert the key into the ignition switch and turn it out of the LOCK position. • When you remove the key from the ignition switch, the driver seat will move to a position 0.3 in (7.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. First, pull the hood release lever located under the left side of the instrument panel. 131 Next, move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Use the hood prop rod (if equipped) to secure the hood in the open position. To prevent possible damage, do not slam the hood to close it. Lower the hood, until it is open approximately 6 in (15 cm), and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. WARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Automatic Headlights This system automatically turns the headlights ON or OFF according to ambient light levels. To turn the system ON, rotate the HEADLIGHT switch counterclockwise to the AUTO (A) position. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you turn the ignition switch OFF.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights On with Wipers When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned ON if the HEADLIGHT switch is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned OFF if they were turned ON by this feature. HEADLIGHT Switch NOTE: The engine must be running before the headlights will come on in the automatic mode.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE and automatically switches from high beams to low beams until the approaching vehicle is out of view. To Activate 1. Select “Automatic High Beams — ON” through the Electronic Vehicle Information Center (EVIC). Refer to “Automatic High Beams,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center” in Section 4. 2. Rotate the HEADLIGHT switch counterclockwise to the AUTO (A) position. 3.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlight Time Delay This feature provides the safety of headlight illumination for up to 90 seconds (programmable) when leaving your vehicle in an unlit area. The Headlight delay time is programmable. Refer to “Delay Turning Headlights Off,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fog Lights The front FOG LIGHT switch is on the HEADLIGHT switch below the dimmer control. To activate the front fog lights, turn ON the parking lights or the low beam headlights and press the FOG LIGHT switch. 3 An indicator light in the instrument cluster illuminates when the fog lights are turned ON. NOTE: The fog lights will operate with the low beam headlights or parking lights on. However, selecting the high beam headlights will turn off the fog lights.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals Move the multifunction lever up or down and the corresponding turn signal indicator in the instrument cluster flashes to show proper operation of the front and rear turn signal lights. You can also signal a lane change by moving the lever partially up or down without moving beyond the detent. Releasing the lever at the detent will provide three flashes. If either indicator has a very fast flash rate, check for a defective outside light bulb.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 because a door is open. This includes the glove box light, but not the trunk light. To restore interior light operation, either turn the ignition switch ON or cycle the light switch. Dimmer Control Overhead Console Interior Lights The interior lights come on when a door is opened. To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dome Light Position Rotate the dimmer control completely upward to the second detent to turn on the interior lights. The interior lights will remain on when the dimmer control is in this position. WINDSHIELD WIPERS AND WASHERS The multifunction lever operates the windshield wipers and washer when the ignition switch is in the ON position. The lever is located on the left side of the steering column.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the end of the multifunction lever to the first detent past the intermittent settings for low speed wiper operation, or to the second detent past the intermittent settings for high speed wiper operation. 141 wipe interval from a minimum of one cycle every second to a maximum of approximately 23 seconds between cycles. WARNING! CAUTION! Turn the windshield wipers off when driving through an automatic car wash.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Washers To use the washer, push the multifunction lever inward (toward the steering column) to the second detent and hold it for as long as washer spray is desired. If you activate the washer while the windshield wiper control is in the delay range, the wipers will operate for two wipe cycles after releasing the lever and then resume the intermittent interval previously selected.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE setting 5 or 6 if you desire more sensitivity. Place the lever in the OFF position when not using the system. NOTE: • The rain sensing feature will not operate when the wiper speed is in the LOW or HIGH position. • The rain sensing feature may not function properly when ice or dried salt water is present on the windshield. • Use of Rain-X威 or products containing wax or silicone may reduce rain sensor performance.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adding Washer Fluid The windshield washer fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. 145 headlight lens. In addition, the windshield washers will spray the windshield and the windshield wipers will cycle. NOTE: The headlight washers will operate on the first spray of the windshield washer and then every fourth spray after that.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adding Washer Fluid The headlight washer and windshield washer share the same fluid reservoir. The reservoir is located in the front of the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. POWER TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: For vehicles equipped with Driver Memory Seat, you can use your Remote Keyless Entry (RKE) transmitter or the MEMORY switch on the driver’s door trim panel to return the tilt/telescopic steering column to pre-programmed positions. Refer to “Driver Memory Seat” in this section. WARNING! Moving the steering column while the vehicle is moving is dangerous. Without a stable steering column, you could lose control of the vehicle and have an accident.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in REVERSE or when the Speed Control is ON. One of the following messages will display in the Electronic Vehicle Information Center (EVIC) if a pedal adjustment is attempted when the system is locked out: “Adjustable Pedal Disabled — Cruise Control Engaged” or “Adjustable Pedal Disabled — Vehicle In Reverse.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Do not place any article under the adjustable pedals or impede its ability to move as it may cause damage to the pedal controls. Pedal travel may become limited if movement is stopped by an obstruction in the adjustable pedal’s path. ELECTRONIC SPEED CONTROL When engaged, this device takes over the accelerator operation at speeds greater than 25 mph (40 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 To Activate Push and release the ON/OFF button located on the end of the speed control lever. The indicator light in the instrument cluster will illuminate to show that the speed control system is ON. To turn the system OFF, push and release the ON/OFF button again. The system and the indicator light will turn off. To Set At A Desired Speed When the vehicle reaches the speed desired, push the lever downward to SET DECEL and release.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate The system will disable electronic speed control without erasing the memory if you: • Softly tap the brake pedal, • Depress the brake pedal, or • Pull the speed control lever toward you to CANCEL. Pushing and releasing the ON/OFF button or turning off the ignition erases the set speed from memory.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Accelerate For Passing Depress the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. Using Speed Control on Hills NOTE: The speed control system maintains speed up and down hills. A slight speed change on moderate hills is normal. The automatic transmission will downshift while climbing uphill or descending downhill. This downshift is necessary to maintain vehicle set speed.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ACC will allow you to keep cruise control engaged in light to moderate traffic conditions without the constant need to reset your cruise control. ACC utilizes an infrared sensor designed to detect a vehicle directly ahead in your path. NOTE: • If the sensor does not detect a vehicle directly ahead of you, ACC will function in the same way as a standard cruise control system. For additional information, refer to “Electronic Speed Control” in this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! You should switch off the ACC system: Adaptive Cruise Control (ACC) Operation The speed control lever (located on the right side of the steering wheel) operates the ACC system. • When driving in fog; heavy rain; heavy snow; sleet; heavy traffic; and complex driving situations (i.e., in highway construction zones).
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Activating Adaptive Cruise Control (ACC) You can only activate ACC if the vehicle speed is above 25 mph (40 km/h). When the system is turned on and in the READY state, the Electronic Vehicle Information Center (EVIC) displays “ACC READY.” When the system is OFF, the EVIC displays “ACC OFF.” NOTE: You cannot enable ACC under the following conditions: • When you apply the brakes. • When the parking brake is set.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 To turn the system OFF, push and release the ON/OFF button again. At this time, the system will turn off and the EVIC will display “ACC OFF.” WARNING! 3 Leaving the Adaptive Cruise Control (ACC) system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you aren’t using it.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The system will not be controlling the distance between your vehicle and the vehicle ahead. The vehicle speed will only be determined by the position of the accelerator pedal. To Cancel The system will disable ACC without erasing the memory if: • You softly tap the brake pedal. • You depress the brake pedal. • You pull the speed control lever toward you to CANCEL. • The Electronic Stability Program / Traction Control System (ESP/TCS) activates.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 To Resume Speed Push the lever up to RESUME ACCEL and release. Then remove your foot from the accelerator pedal. The EVIC will display the last set speed. WARNING! To Turn Off The system will turn off and erase the set speed in memory if: • You push and release the ON/OFF button. • You turn off the ignition. • You switch off ESP. The Resume function should only be used if traffic and road conditions permit.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Vary the Speed Setting While ACC is set, you can increase the set speed by lifting and holding the lever in RESUME ACCEL. If the lever is continually held, the set speed will continue to increase in 5 mph (Canada 10 km/h) increments until the lever is released. The increase in set speed is reflected in the EVIC display. Tapping the lever up once will result in a 1 mph (Canada 1 km/h) increase in set speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting the Following Distance in ACC The specified following distance for ACC can be set by varying the distance setting between long, medium, and short. Using this distance setting and the vehicle speed, ACC calculates and sets the distance to the vehicle ahead. This distance setting displays in the EVIC. 161 To can change the distance setting, push the lever away from you to DISTANCE and release.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The distance setting is changed. • The system disengages. (Refer to the information on ACC Activation). The maximum braking applied by ACC is limited; however, the driver can always apply the brakes manually, if necessary. NOTE: The brake lights will illuminate whenever the ACC system applies the brakes. A Proximity Warning will alert the driver if ACC predicts that its maximum braking level is not sufficient to maintain the set distance.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Press the MENU button (located on the steering wheel) repeatedly until one of the following displays in the EVIC: Menu Button ACC OFF − When ACC is deactivated, the display will read “ACC OFF.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ACC READY − When ACC is activated, the display will read “ACC READY.” ACC SET − When ACC is set, the set speed will display. 1 — Sensed Vehicle Indicator 2 — Set Speed 3 — Your Vehicle 4 — Following Distance Setting: Three Bars = Long; Two Bars = Medium; One Bar = Short. The set speed will continue to display in place of the odometer reading when changing the EVIC display while ACC is set.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 • Acquisition/loss of Target • Driver override • System off • Proximity warning • ACC warning The EVIC will return to the last display selected after five seconds of no ACC activity.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If weather conditions are not a factor, the driver should examine the sensor. It may require cleaning or removal of an obstruction. The sensor is located behind the grille, slightly offset from the center of the grille. ACC Sensor Location To keep the ACC System operating properly, it is important to note the following maintenance items: • Always keep the sensor clean. Carefully wipe the sensor lens with a soft cloth.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Do not remove any screws from the sensor or the sensor mount. Doing so could cause an ACC system malfunction or failure and require a sensor realignment. • If the sensor is damaged due to an accident, see your authorized dealer for service. • Do not attach or install any accessories near the sensor, including transparent material or aftermarket grilles. Doing so could cause an ACC system failure or malfunction.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Service ACC Warning If the system turns off, and the EVIC displays “SERVICE ACC,” it indicates there is an internal system fault that requires service from an authorized dealer. Precautions While Driving with ACC In certain driving situations, ACC may have detection issues. In these cases, ACC may brake late or unexpectedly. The driver needs to stay alert and may need to intervene.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turns and Bends In turns or bends, ACC may detect a vehicle ahead too late or too early. This may cause your vehicle to brake late or unexpectedly. Give extra attention in curves and be ready to apply the brakes if necessary. Be sure to select an appropriate speed while driving in curves. 169 ACC may occasionally provide braking and/or a driver alert that you consider unnecessary.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE There will not be sufficient distance to the lane-changing vehicle. Always be attentive and ready to apply the brakes if necessary. Lane Changing ACC will not detect a vehicle until it is completely in the lane in which you are traveling. In the illustration shown, ACC has not yet detected the vehicle changing lanes and it will not until it may be too late to take action. ACC will not detect a vehicle until it is completely in the lane.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Narrow Vehicles Some narrow vehicles traveling near the outer edges of the lane or edging into the lane are not detected until they have moved fully into the lane. There will not be sufficient distance to the vehicle ahead. 171 Stationary Objects and Vehicles ACC does not react to stationary objects and stationary vehicles.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information CLASS 1 LASER PRODUCT Classification Specifications: 21 C.F.R part 1040.10 & 1040.11 DIN EN 60825-1:2003 IEC 60825-1:2001 REAR PARK ASSIST SYSTEM The Rear Park Assist System is a driver aid that senses for obstacles behind the vehicle. Refer to the Warnings, Cautions, and Notes in this section for system limitations and usage recommendations.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 The warning display contains two sets of yellow and red LEDs, one set to warn of obstacles behind the left rear of the vehicle and the other set to warn of obstacles behind the right rear of the vehicle. The driver can view the LEDs either through the rear view mirror or by looking at the display above the rear window. The system dimly illuminates the two outer most yellow LEDs when it is ON and detecting no obstacles.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING DISPLAY DISTANCES DISPLAY LED 1st LED 2nd LED 3rd LED 4th LED 5th LED 6th LED 7th LED 8th LED OBSTACLE DISTANCE FROM: REAR CORNERS REAR CENTER 59 in (150 cm) 47 in (120 cm) 39 in (100 cm) 31.5 in (80 cm) 31.5 in (80 cm) 25.5 in (65 cm) 25.5 in (65 cm) 20 in (50 cm) 20 in (50 cm) 16 in (40 cm) 16 in (40 cm) 6 in (15 cm) 12 in (30 cm) NOTE: The Rear Park Assist system will MUTE the radio, if on, when the system is sounding an audio tone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 WARNING! CAUTION! • Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. You are responsible for safety and must continue to pay attention to your surroundings. Failure to do so can result in serious injury or death.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Ensure that the rear bumper is free of dirt and debris to keep the system operating properly. • Jackhammers, large trucks, and other vibrations could affect the performance of the system. If “Service Park Assist System” appears in the EVIC after making sure the rear bumper is clean please see your authorized dealer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE These lights also turn on when a door is opened, or when the UNLOCK button on the Remote Keyless Entry (RKE) transmitter is pressed, or when the dimmer control is turned fully upward, past the second detent. 177 The HomeLink威 buttons are located in the overhead console, and contain one, two, or three dots/lines designating the different HomeLink威 channels.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people or pets are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety standards. This includes most garage door opener models manufactured after 1982.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE It is recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink威 for more efficient training and accurate transmission of the radio-frequency signal. Your vehicle should be parked outside of the garage while training. 179 Then release both the HomeLink威 and hand-held transmitter buttons. If the EVIC display states “DID NOT TRAIN” repeat Step 3.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: After training a HomeLink威 channel, if the garage door does not operate with HomeLink威 and the garage door opener was manufactured after 1995, the garage door opener may have rolling code. If so, proceed to the heading “Programming A Rolling Code System.” 5. PROGRAMMING A ROLLING CODE SYSTEM At the garage door opener motor (in the garage), locate the “learn” or “training” button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 7. Return to the vehicle and press the programmed HomeLink威 button twice (holding the button for two seconds each time). If the device is plugged in and activates, programming is complete. If the device does not activate, press the button a third time (for two seconds) to complete the training. If you have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the Internet at www.HomeLink.com for information or assistance.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Then proceed with Step 4 under “Programming HomeLink威” earlier in this section. 3. Without releasing the button, proceed with Programming HomeLink威 Step 2 and follow all remaining steps. Using HomeLink姞 To operate, simply press and release the programmed HomeLink威 button. Activation will now occur for the trained device (i.e., garage door opener, gate operator, security system, entry door lock, home/office lighting, etc.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Troubleshooting Tips If you are having trouble programming HomeLink威, here are some of the most common solutions: 2. This device must accept any interference that may be received including interference that may cause undesired operation • Replace the battery in the original transmitter. NOTE: The transmitter has been tested and it complies with FCC and IC rules.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The power SUNROOF switch is located between the sun visors on the overhead console. WARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power SUNROOF switch. Such entrapment may result in serious injury or death.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof - Express Press the switch rearward and release, and the sunroof will open automatically from any position. The sunroof will open fully and then stop automatically. This is called Express Open. During Express Open operation, any movement of the SUNROOF switch will stop the sunroof. Closing Sunroof - Express Press the switch forward and release, and the sunroof will close automatically from any position.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunshade Operation The sunshade can be opened manually. However, the sunshade will open automatically as the sunroof opens. Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. NOTE: The sunshade cannot be closed if the sunroof is open. Ignition Off Operation The power SUNROOF switch will remain active for up to 60 minutes after the ignition switch is turned OFF. Opening either front door will cancel this feature.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRICAL POWER OUTLETS There are two 12-volt electrical outlets on this vehicle. Both of the outlets are protected by a fuse. The 12-volt power outlet next to the ash receiver tray (if equipped with an optional Smoker’s Package) has power available only when the ignition is ON. This outlet will also operate a conventional cigar lighter unit.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The center console outlet is powered directly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or prevent engine starting. Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery even when not in use (i.e., cellular phones, etc.).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Front Seat Cupholders The cupholders are located in the forward edge of the center console. 189 Rear Seat Cupholders The rear seat cupholders are located in the center armrest between the rear seats. The cupholders are positioned forward in the armrest and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the rear occupants’ elbows.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE Console Features The center console contains two shift bezel cubby bins with rubber mats for holding small items. For vehicles not equipped with navigation radio, the console also contains an extra storage bin located below the climate control, which holds up to four CD jewel cases. Without Vehicle Entertainment System (VES)威 Two separate storage compartments are also located underneath the armrest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also contains a 12-volt power outlet and a molded-in coin holder (designed to hold various size coins). A slot in the left and right side of the top compartment provides clearance for power cords to pass conveniently out of the bin with the lid closed.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! • Be certain that the seatback is securely locked into position. If the seatback in not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. • The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel And Controls . . . . . . . . . . . . . 197 ▫ Telephone — If Equipped . . . . . . . . . . . . . . . 222 䡵 Premium Instrument Cluster . . . . . . . . . . . . . . . 198 ▫ Navigation — If Equipped . . . . . . . . . . . . . . . 224 䡵 Instrument Cluster Descriptions . . . . . . . . . . . . 199 ▫ Driver-Selectable Surround Sound (DSS) – If Equipped . . . . . . . . . . . . . . . . . . . . . . . . .
194 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Radio Broadcast Signals . . . . . . . . . . . . . . . . . 231 ▫ Two Types Of Signals . . . . . . . . . . . . . . . . . . 231 ▫ Electrical Disturbances . . . . . . . . . . . . . . . . . . 232 ▫ AM Reception . . . . . . . . . . . . . . . . . . . . . . . 232 ▫ FM Reception . . . . . . . . . . . . . . . . . . . . . . . . 232 䡵 Sales Code REN — Multimedia System — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 195 ▫ Operating Instructions — Hands-Free Communication (UConnect威) (If Equipped) . . . 253 ▫ Electronic Serial Number/Sirius Identification Number (ENS/SID) . . . . . . . . . . . . . . . . . . . . 269 ▫ Clock Setting Procedure . . . . . . . . . . . . . . . . . 253 ▫ Selecting Satellite Mode . . . . . . . . . . . . . . . . . 269 䡵 Sales Code RES — AM/FM Stereo Radio With CD Player (MP3 AUX Jack) . . . . . . . . . . . . . . . . . . 256 ▫ Satellite Antenna . . . . .
196 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Kicker威 13-Speaker High Performance Sound System With Driver-Selectable Surround (DSS) – If Equipped . . . . . . . . . . . . . . . . . . . 276 ▫ Kicker威 Mobile Surround (KMS1)威 – If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 276 䡵 Universal Consumer Interface (UCI) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 277 䡵 Remote Sound System Controls — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 197 INSTRUMENT PANEL AND CONTROLS 4 1 2 3 4 5 6 — Air Outlet — Instrument Cluster — HAZARD Switch — Analog Clock — Electronic Stability Program OFF Button* — Glove Box 7 — Radio 8 — Climate Control 9 — HEATED SEAT Switch* 10 — Power Outlet 11 — Ash Tray* 12 — Storage Compartment* 13 — Ignition Switch 14 — Hood Release 15 — TRUNK RELEASE Switch 16 — HEADLIGHT Switch * If Equipped
198 UNDERSTANDING YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Electronic Speed Control/Adaptive Cruise Control Indicator Light — If Equipped This light will turn on when the electronic speed control or ACC is ON. (See page 150 for more information.) (See page 153 for more information.) 2. Low Fuel Indicator Light This light will turn on and a single chime will sound when the fuel level drops to 1/8 tank. (See page 361 for more information.) 3.
200 UNDERSTANDING YOUR INSTRUMENT PANEL Loose Fuel Filler Cap If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “Check Gascap” message will display in the EVIC. Tighten the fuel filler cap properly and press the TRIP ODOMETER button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started.
UNDERSTANDING YOUR INSTRUMENT PANEL If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes. If the ABS light does not turn on when the Ignition switch is turned to the ON position, have the light inspected by an authorized dealer. (See page 317 for more information.) 10.
202 UNDERSTANDING YOUR INSTRUMENT PANEL The dual brake system provides a reserve braking capacity to a portion of the hydraulic system in the event of a failure. Failure of either half of the dual brake system is indicated by the Brake Warning Light, which will turn on when the brake fluid level in the master cylinder drops below a specified level. WARNING! Driving a vehicle with the brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle.
UNDERSTANDING YOUR INSTRUMENT PANEL the light remains on, or if the light does not turn on, have the light inspected by an authorized dealer. NOTE: The light will turn on when the ignition switch is in the ON position and the parking brake is applied. This light shows only that the parking brake is applied. It does not show the degree of brake application. (See page 317 for more information.) 13.
204 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! WARNING! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads 240°F (116°C) or greater, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range 200– 230°F (93–110°C). If the pointer remains at 240°F (116°C) or greater and you hear a chime, turn the engine OFF immediately, and call for service. A hot engine cooling system is dangerous.
UNDERSTANDING YOUR INSTRUMENT PANEL 205 16. High Beam Light This light will turn on when the high beam headlights are ON. Push the multifunction lever away from the steering wheel to switch the headlights to high beam. (See page 137 for more information.) 19. Vehicle Security Alarm (VSA) Indicator Light — If Equipped The VSA Indicator Light flashes rapidly when the VSA is arming, and slowly when the VSA is armed. (See page 18 for more information.) 17.
206 UNDERSTANDING YOUR INSTRUMENT PANEL engine running, your vehicle will usually be drivable. However, see your authorized dealer for service as soon as possible. If the light is flashing when the engine is running, immediate service is required. In this case, you may experience reduced performance, an elevated/rough idle or engine stall, and your vehicle may require towing. Also, have the system checked by an authorized dealer if the light does not come on during starting. 22.
UNDERSTANDING YOUR INSTRUMENT PANEL Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.
208 UNDERSTANDING YOUR INSTRUMENT PANEL 23. Charging System Light This light shows the status of the electrical charging system. The light should turn on when the ignition switch is first turned ON and remain on briefly as a bulb check. If the light stays on, or turns on while driving, turn off some of the vehicle’s non-essential electrical devices (i.e., radio) or slightly increase engine speed (if at idle). If the light remains on, it means that the charging system is experiencing a problem.
UNDERSTANDING YOUR INSTRUMENT PANEL Do not operate the vehicle until the cause is corrected. This light does not show how much oil is in the engine. The engine oil level must be checked using the procedure shown in Section 7. (See page 391 for more information.) ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) 209 The Electronic Vehicle Information Center (EVIC) features a driver-interactive display. It is located in the upper part of the cluster between the speedometer and tachometer.
210 UNDERSTANDING YOUR INSTRUMENT PANEL • UConnect威 hands-free communication system displays (if equipped), • Navigation system screens (if equipped), • Audio mode display, • Surround Sound modes (if equipped with DriverSelectable Surround [DSS]), and • Performance Pages (if equipped). The system allows the driver to select information by pressing the following buttons mounted on the steering wheel.
UNDERSTANDING YOUR INSTRUMENT PANEL Press the AUDIO MODE button to select the Compass/Temp/Audio screen. Along with compass reading and outside temperature, this AUDIO screen will display radio and media mode MODE information depending on which radio is in the Button vehicle. Refer to “Remote Sound System Controls” in this section.
212 UNDERSTANDING YOUR INSTRUMENT PANEL • Door(s) Ajar (with a single chime if vehicle is in motion) • Trunk Ajar (with a single chime) • Low Washer Fluid (with a single chime) • Oil Pressure • ACC Off — When the Adaptive Cruise Control (ACC) system is turned off. Refer to “Adaptive Cruise Control (ACC)” in Section 3 (if so equipped). • ACC Ready — When the Adaptive Cruise Control (ACC) system is activated. Refer to “Adaptive Cruise Control (ACC)” in Section 3 (if so equipped).
UNDERSTANDING YOUR INSTRUMENT PANEL • ACC Blinded — If the Adaptive Cruise Control (ACC) system deactivates due to performance limiting conditions. Refer to “Adaptive Cruise Control (ACC)” in Section 3 (if so equipped). • ACC Unavailable — If the Adaptive Cruise Control (ACC) system turns off due to a temporary malfunction that limits functionality. Refer to “Adaptive Cruise Control (ACC)” in Section 3 (if so equipped).
214 UNDERSTANDING YOUR INSTRUMENT PANEL • Right Front Low Pressure (with a single chime). Refer to information on “Tire Pressure” and “Tire Pressure Monitor” under “Starting And Operating.” • Right Rear Low Pressure (with a single chime). Refer to information on “Tire Pressure” and “Tire Pressure Monitor” under “Starting And Operating.” • Check TPM System (with a single chime). Refer to information on “Tire Pressure” and “Tire Pressure Monitor” under “Starting And Operating.
UNDERSTANDING YOUR INSTRUMENT PANEL Trip Functions Press and release the MENU button until one of the following Trip Functions displays in the EVIC: • Average Fuel Economy • Distance To Empty • Trip A • Trip B • Elapsed Time • Display Units of Measure in Press the SCROLL button to cycle through all the Trip Computer functions. The Trip Functions mode displays the following information. 215 • Average Fuel Economy Shows the average fuel economy since the last reset.
216 UNDERSTANDING YOUR INSTRUMENT PANEL • When the DTE value is less than 30 mi (48 km) estimated driving distance, the DTE display will change to a text display of ⬙LOW FUEL.⬙ This display will continue until the vehicle runs out of fuel. Adding a significant amount of fuel to the vehicle will turn off the ⬙LOW FUEL⬙ text and a new DTE value will display. • Trip A Shows the total distance traveled for Trip A since the last reset. • Trip B Shows the total distance traveled for Trip B since the last reset.
UNDERSTANDING YOUR INSTRUMENT PANEL Performance Pages — If Equipped WARNING! Measurement of vehicle statistics with the Performance Pages is intended for off-highway or off-road use only and should not be done on any public roadways. It is recommended that these features be used in a controlled environment and within the limits of the law.
218 UNDERSTANDING YOUR INSTRUMENT PANEL • The feature will “ready” when the vehicle speed is at 0 mph (0 km/h). The word “READY” will flash when conditions are met for the event to begin. • Dashes will display if the vehicle fails to reach 60 mph (100 km/h) in less then 10 seconds. • The time will continue to display until the FUNCTION SELECT button is pressed. • Pressing the FUNCTION SELECT button will clear the current run time and display the vehicle’s best 0-60 mph (0-100 km/h) time.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 1/8 Mile, 1/4 Mile When selected, this screen displays the time it takes the vehicle to travel 1/8 mile (1/4 mile) within 30 seconds and the vehicle’s speed when it reaches 1/8 mile (1/4 mile). Instantaneous G-Force When selected, this screen displays the current G-Force (longitude and latitude) along with a friction circle that displays the directions of the forces. • The feature will “ready” when the vehicle is at 0 mph (0 km/h).
220 UNDERSTANDING YOUR INSTRUMENT PANEL • Press and hold the FUNCTION SELECT button for three seconds to toggle between current speed and top speed. • To reset top speed, quickly press and release the FUNCTION SELECT button when top speed is displayed. Compass Display The compass readings indicate the direction the vehicle is facing. Press and release the COMPASS button to display one of eight comCOM- pass readings and the outside temperature.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 5. Complete one or more 360 degree turns (in an area free from large metal or metallic objects) until the “CAL” message turns off. The compass will now function normally. Compass Variance Compass Variance is the difference between magnetic North and geographic North. In some areas of the country, the difference between magnetic and geographic North is great enough to cause the compass to give false readings.
222 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Turn the ignition switch ON. 2. Press and hold the COMPASS button for approximately two seconds. 3. Press the SCROLL button until “Compass Variance” message and the last variance zone number displays in the EVIC. 4. Press and release FUNCTION SELECT button until the proper variance zone is selected according to the map. 5. Press and release the COMPASS button to exit.
UNDERSTANDING YOUR INSTRUMENT PANEL The EVIC displays this symbol to indicate an incoming call. Incoming Call The EVIC displays this symbol to indicate that you have voice mail. Voice Mail The EVIC displays this symbol to indicate that the UConnect威 phone is currently in analog mode. Analog The EVIC displays this symbol to indicate that the UConnect威 phone is currently roaming. Roaming 223 The EVIC displays this symbol to indicate a text message.
224 UNDERSTANDING YOUR INSTRUMENT PANEL The EVIC displays this symbol to indicate that a phone connection has been made. Call in Progress The EVIC displays this symbol to indicate that the UConnect威 phone is currently not available. Phone Not Available Navigation — If Equipped Navigation Display Control Press and release the MENU button until Navigation displays in the EVIC. When the Navigation System is On, the steering wheel buttons can be used to select the Map or Menu display on the Navigation Unit.
UNDERSTANDING YOUR INSTRUMENT PANEL Driver-Selectable Surround Sound (DSS) – If Equipped Press and release the MENU button until “Surround Sound” displays in the EVIC. The EVIC provides information on the current surround mode. • Stereo • Video Surround • Audio Surround While in the Surround Sound menu, press the FUNCTION SELECT button to change surround modes. The Video Surround Mode will only be available for video media sources (DVDs, Video CDs, or other video media supported by the radio).
226 UNDERSTANDING YOUR INSTRUMENT PANEL Personal Settings (Customer Programmable Features) Personal Settings allows the driver to set and recall features when the transmission is in PARK. Press and release the MENU button until Personal Settings displays in the EVIC. Use the SCROLL button to display one of the following choices: “Language” When in this display you may select one of five languages for all display nomenclature, including the trip functions and the navigation system (if equipped).
UNDERSTANDING YOUR INSTRUMENT PANEL Press is selected, you must press the RKE UNLOCK button twice to unlock the passenger’s doors. When All Doors 1st Press is selected, all of the doors will unlock on the first press of the RKE UNLOCK button. To make your selection, press and release the FUNCTION SELECT button until “Driver Door 1st Press” or “All Doors 1st Press” appears.
228 UNDERSTANDING YOUR INSTRUMENT PANEL “Automatically Move Seat Back on Exit” — If Equipped This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. To make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears. NOTE: The seat will return to the memorized seat location (if Recall Memory with Remote Key Unlock is set to ON) when the RKE transmitter is used to unlock the door.
UNDERSTANDING YOUR INSTRUMENT PANEL when exiting the vehicle. To make your selection, press and release the FUNCTION SELECT button until “0,” “30,” “60,” or “90” appears. “Tilt Mirrors Down in Reverse” When ON is selected, the outside rearview mirrors will tilt downward when the ignition switch is in the ON position and the transmission is in the REVERSE position. The mirrors will move back to their previous position when the transmission is shifted out of REVERSE.
230 UNDERSTANDING YOUR INSTRUMENT PANEL “Park Assist System” When ON is selected, the system will scan for objects behind the vehicle when the transmission is in the REVERSE or NEUTRAL position. To make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears. “Display Units of Measure in” The EVIC, odometer, and navigation system (if equipped) can be changed between English and Metric units of measure.
UNDERSTANDING YOUR INSTRUMENT PANEL SETTING THE ANALOG CLOCK To set the analog clock at the top center of the instrument panel, press and hold the button until the setting is correct. Analog Clock 231 RADIO GENERAL INFORMATION Radio Broadcast Signals Your new radio will provide excellent reception under most operating conditions.
232 UNDERSTANDING YOUR INSTRUMENT PANEL Electrical Disturbances Radio waves may pick up electrical disturbances during transmission. They mainly affect the wave amplitude, and thus remain a part of the AM reception. They interfere very little with the frequency variations that carry the FM signal. AM Reception AM sound is based on wave amplitude, so AM reception can be disrupted by such things as lightning, power lines and neon signs. OFF. Opening either front door will cancel this feature.
UNDERSTANDING YOUR INSTRUMENT PANEL An auxiliary input jack permits passengers to listen to a portable MP3 player through the vehicle’s speakers. For vehicles equipped with the Vehicle Entertainment System (VES)威, separate audio outputs allow passengers to listen to the vehicle speakers while different audio tracks play through the system’s wireless headphones.
234 UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure Setting the Clock 1. Turn on the multimedia system. 2. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. To move the hour forward, touch the screen where the word “Hour” with the arrow pointing upward is displayed. To move the hour backward, touch the screen where the word “Hour” with the arrow pointing downward is displayed. 4.
UNDERSTANDING YOUR INSTRUMENT PANEL 235 Show Time if Radio is Off When selected, this feature will display the time of day on the touch screen when the multimedia system is turned off. Proceed as follows to change the current setting: Changing the Time Zone 1. Turn on the multimedia system. 3. Touch the screen where the words “Set Time Zone” are displayed. The time zone selection menu will appear on the screen. 2. Touch the screen where the time is displayed.
236 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button Pressing the SCAN button causes the tuner to search for the next listenable station, in AM, FM or Satellite (if equipped) frequencies, pausing for five seconds at each listenable station before continuing to the next.
238 UNDERSTANDING YOUR INSTRUMENT PANEL 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save the time change. 5. To exit, press any button/knob or wait five seconds. The clock can also be set by pressing the SETUP button and selecting the “SET HOME CLOCK” entry.
UNDERSTANDING YOUR INSTRUMENT PANEL 239 Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones. or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information. Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display.
240 UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Jazz News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk 16-Digit Character Display Jazz News Nostalga Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R&B Sports Talk Program Type Top 40 Weather 16-Digit Character Display Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next f
UNDERSTANDING YOUR INSTRUMENT PANEL 241 NOTE: Turn the TUNE/SCROLL control knob to scroll through the entries. Push the AUDIO/SELECT button to select an entry and make changes. • Audio Stream – Repeatedly pressing SELECT will switch to different audio languages (if supported on the disc) (if equipped). • DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current highlighted selection. Use the remote control to scroll up and down the menu (if equipped).
242 UNDERSTANDING YOUR INSTRUMENT PANEL • VES™ CH1/CH2 - Allows the user to change the mode of either the IR1 or IR2, wireless headphones by pressing the AUDIO/SELECT button (if equipped). Enter the four-digit country code using the TUNE/ SCROLL control knob to scroll up and down to select the number and then push to select. • Set Home Clock - Pressing the SELECT button allows you to set the clock.
UNDERSTANDING YOUR INSTRUMENT PANEL Subtitles — If Equipped Selecting this item allows you to choose between subtitle Off or On. Audio DRC — If Equipped Selecting this item allows you to limit maximum audio dynamic range. The default is set to ⬙High,⬙ and under this setting, dialogues will play at 11 db higher than if the setting is ⬙Normal.⬙ Aspect Ratio — If Equipped Selecting this item allows you to choose between wide screen, pan scan, and letter box.
244 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM, 12 FM, and 12 Satellite (if equipped) stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The ignition switch must be in the ON or ACC position to operate the radio. LOAD Button — Loading Compact Disc(s) Press the LOAD button and the pushbutton with the corresponding number (1-6) where the CD is being loaded. The radio will display PLEASE WAIT and prompt when to INSERT DISC. After the radio displays ⬙INSERT DISC,⬙ insert the CD into the player.
246 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (CD MODE) Press the SCAN button to scan through each track on the CD currently playing. TIME Button (CD MODE) Press this button to change the display from a large CD playing time display to a small CD playing time display. RW/FF (CD MODE) Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released, or RW or another CD button is pressed. The RW (Rewind) button works in a similar manner.
UNDERSTANDING YOUR INSTRUMENT PANEL The radio uses the following limits for file systems: • Maximum number of directory levels: 8 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙.⬙ and a threecharacter extension) • Level 2: 31 (including a separator ⬙.⬙ and a threecharacter extension) Multisession disc formats are supported by the radio.
248 UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 WMA Specification WMA Sampling Bit Rate (kbps) Frequency (kHz) 320, 256, 224, 192, 160, 128, 48, 44.1, 32 112, 96, 80, 64, 56, 48 160, 128, 144, 24, 22.05, 16 112, 96, 80, 64, 56, 48 Sampling Bit Rate (kbps) Frequency (kHz) 48, 64, 96, 128, 44.1 and 48 160, 192 VBR ID3 Tag information for artist, song title, and album title are supported for ID3 version 1 tags.
UNDERSTANDING YOUR INSTRUMENT PANEL 249 To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a single-session disc, enable the “Disc at Once” option before writing to the disc. INFO Button (DISC Mode for MP3/WMA Play) Pressing the INFO button repeatedly will scroll through the following TAG information: Song Title, Artist, File Name, and Folder Name (if available).
250 UNDERSTANDING YOUR INSTRUMENT PANEL Pressing the AUX button will change the mode to auxiliary device if the AUX jack is connected. NOTE: The AUX device must be turned on and the device’s volume set to the proper level. If the AUX audio is not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume down. SEEK Button (Auxiliary Mode) No function. SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Hands-Free Phone (UConnect威) (If Equipped) Refer to “Hands-Free Communication (UConnect威)” in Section 3. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio” in this section. Operating Instructions - Video Entertainment System (VES™) (If Equipped) Refer to separate “Video Entertainment System (VES™) Guide.” Dolby威 Manufactured under license from Dolby Laboratories.
252 UNDERSTANDING YOUR INSTRUMENT PANEL The RER Multimedia system contains a radio, Sirius Satellite Radio player, navigation system, CD/DVD player, USB port, 20-gigabyte hard drive (HDD), and the UConnect威 Hands-Free Bluetooth威 cellular system. A shared HDD for the navigation system, the database, and other radio features allows uploads of music and photos from CDs or through the USB port. The Gracenote database finds the artist, track, and title for the music.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 Other special features include direct tune, music type selections, traffic messaging (optional), easy store presets, parental lockout for VES™ (if equipped), backup camera display for vehicles equipped with a backup camera, and on some models, a dual display screen operation. Refer to your “Navigation User’s Manual” for detailed operating instructions.
254 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Touch the screen where the words “Set Time Zone” are displayed. The time zone selection menu will appear on the screen. 5. Select a time zone by touching the screen where your selection appears. If you do not see a time zone that you want to select, touch the screen where the word “Page” is displayed to view additional time zones in the menu. Changing Daylight Savings Time When selected, this feature will display the time of day in daylight savings time.
UNDERSTANDING YOUR INSTRUMENT PANEL 255 3. If the words “Time: GPS Time” are displayed at the top of the screen, touch the bottom of the screen where the words “GPS Time” are displayed. The user clock time setting menu will appear on the screen. Show Time if Radio is Off When selected, this feature will display the time of day on the touch screen when the system is turned off. Proceed as follows to change the current setting: 4.
256 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RES — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it.
258 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button Press the TIME button and the time of day will display. In AM or FM mode, pressing the TIME button will switch between the time and frequency displays. Clock Setting Procedure 1. Press and hold the TIME button, until the hours blink. 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4.
UNDERSTANDING YOUR INSTRUMENT PANEL TUNE Control Turn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the frequency. Setting the Tone, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the bass tones. Push the rotary TUNE/SCROLL control knob a second time and MID will display.
260 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button to select the following format types: Program Type No program type or undefined Adult Hits Classical Classic Rock College Country Foreign Language Information Jazz News Nostalgia Oldies 16-Digit Character Display None Adlt Hit Classicl Cls Rock College Country Language Inform Jazz News Nostalga Oldies Program Type Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk To
UNDERSTANDING YOUR INSTRUMENT PANEL By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station.
262 UNDERSTANDING YOUR INSTRUMENT PANEL stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC Button Pressing the DISC button will allow you to switch from AM/FM modes to Disc modes.
UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player. Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player.
264 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display. RW/FF Press the RW button to stop the CD at the beginning of the current CD track/title. Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner.
UNDERSTANDING YOUR INSTRUMENT PANEL files properly and may be unable to play the file normally. UDF and Apple HFS formats are not supported. The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead.
266 UNDERSTANDING YOUR INSTRUMENT PANEL rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specification MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 Sampling Bit Rate (kbps) Frequency (kHz) 320, 256, 224, 192, 160, 128, 48, 44.1, 32 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 24, 22.
UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
268 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when ignition is OFF). Operating Instructions - Hands-Free Phone (UConnect威) (If Equipped) Refer to “Hands-Free Communication (UConnect威)” in Section 3. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio” in this section.
UNDERSTANDING YOUR INSTRUMENT PANEL 269 call the toll-free number 888-539-7474, or visit the Sirius web site at www.sirius.com, or at www.siriuscanada.ca for Canadian residents. Please have the following information available when calling: selected. Press the TUNE/SCROLL control knob and the Sirius ID number will display. The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen. 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID).
270 UNDERSTANDING YOUR INSTRUMENT PANEL Satellite Antenna To ensure optimum reception, do not place items on the roof around the rooftop antenna location or strap items to the trunk lid around the trunk lid antenna (if equipped). Metal objects placed within the line of sight of the antenna will cause decreased performance. Larger luggage items such as bikes should be placed as far rearward as possible, within the loading design of the rack. Do not place items directly on or above the antenna.
UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button Pressing the SCAN button causes the tuner to search for the next channel, pausing for eight seconds before continuing to the next. To stop the search, press the SCAN button a second time. INFO Button Pressing the INFO button will cycle between Artist, Song Title, and Composer (if available) information.
272 UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number. This number is used to activate, deactivate, or change the Sirius subscription. SET Button – To Set the Pushbutton Memory When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. The symbol SET 1 will now show in the display window.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Hands-Free Phone (If Equipped) Refer to “Hands-Free Communication (UConnect威)” in Section 3. Operating Instructions - Video Entertainment System (VES™) (If Equipped) Refer to separate “Video Entertainment System (VES™) Guide.” SIRIUS BACKSEAT TV™ — IF EQUIPPED Satellite video uses direct satellite receiver broadcasting technology to provide streaming video coast to coast. The subscription service provider is SIRIUS Satellite Radio.
274 UNDERSTANDING YOUR INSTRUMENT PANEL Opening the Rear Seat VES威 VES威 Video Screen • The LCD Screen swings up from the rear of the armrest to allow the rear seat passenger(s) to view the display. NOTE: Close the armrest after the LCD screen has been raised to its viewing position. • The touch screen radio and DVD player controls allow front seat operation for easy setup in the case of younger rear seat passengers.
UNDERSTANDING YOUR INSTRUMENT PANEL • A battery-powered infrared remote control snaps into a molded compartment in the center console armrest upper storage bin. 275 Audio/Video RCA Jacks (AUX Jacks) on the rear of the center console enable the monitor to display video directly from a video camera, connect video games for display on the screen, or play music directly from an MP3 player. 1. Video in (yellow) 2. Left audio in (white) 3.
276 UNDERSTANDING YOUR INSTRUMENT PANEL Kicker姞 13-speaker High Performance Sound System with Driver-Selectable Surround (DSS) – If Equipped Your vehicle is equipped with a state of the art audio amplifier that provides 5.1-channel surround sound from any stereo audio source. A new feature of the Kicker威 audio system offers the ability to choose surround sound for any audio source or video source.
UNDERSTANDING YOUR INSTRUMENT PANEL The KMS1威 Video Surround mode activates whenever a video source is selected, unless the system is already in “Audio Surround” mode. DSS modes for video sources are “Stereo,” “Audio Surround,” and “Video Surround.” When in Video Surround mode, balance and fade are set automatically by the KMS1威 system to provide the ultimate surround sound experience.
278 UNDERSTANDING YOUR INSTRUMENT PANEL Controlling The iPod姞 Using Radio Buttons To get into the UCI (iPod威) mode and access a connected iPod威, press the AUX button on the radio faceplate. Once in the UCI (iPod威) mode, the iPod威 audio track (if available from iPod威) will start playing over the vehicle audio system. Play Mode When switched to UCI mode the iPod威 will be in Play mode.
UNDERSTANDING YOUR INSTRUMENT PANEL 279 Pressing and releasing the FF button will go forward five seconds of the current track. of the screens, the last press of the INFO button will take you back to the Play mode screen on the radio. SEEK Buttons Use the SEEK buttons to move to the previous or the next track. REPEAT Button Press the REPEAT button to repeat the current playing track.
280 UNDERSTANDING YOUR INSTRUMENT PANEL List or Browse Mode During Play mode, pressing any of the following buttons will take you to List mode. List mode enables you to scroll through the list of menus and tracks on the iPod威 device. During all List modes, the iPod威 will display all lists in “wrap-around” mode. So if the track you wish to select is at the bottom of the list, you just turn the TUNE/ SCROLL knob backward (counterclockwise) to get to the track faster.
UNDERSTANDING YOUR INSTRUMENT PANEL After pressing a preset button, you will see the list you are in on the top line and the first item in that list on the second line. To exit the List mode without selecting a track, press the same preset button again to go back to Play mode. REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls are located on the surface of the steering wheel at the 3 and 9 o’clock positions.
282 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicles equipped with steering wheel-mounted buttons are also equipped with the Electronic Vehicle Information Center (EVIC). The EVIC features a driver-interactive display. This is located in the upper part of the instrument cluster between the speedometer and tachometer. VOLUME Button The VOLUME button controls the sound level of the sound system. Press the top of the VOLUME button to increase the sound level.
UNDERSTANDING YOUR INSTRUMENT PANEL CD/DVD DISC MAINTENANCE To keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper, paper CD labels, or tape to the disc; avoid scratching the disc. 4. Do not use solvents such as benzine, thinner, cleaners, or antistatic sprays. 5. Store the disc in its case after playing. 6.
284 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Temperature Control Automatic Temperature Controls Automatic Operation The Infrared Dual-Zone Climate Control System automatically maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger.
UNDERSTANDING YOUR INSTRUMENT PANEL or HI AUTO. The LO AUTO position should be used for front seat occupants only. The HI AUTO position should be used when more airflow is desired, or when rear seat occupants are present. Then, dial in the temperature you would like the system to maintain by rotating the driver or passenger Temperature Control knob. Once the comfort level is selected, the system will maintain that level automatically using the heating system.
286 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • The surface of the climate control panel and the top center of the instrument panel should be kept free of debris due to the location of the climate control sensors. Mud on the windshield may also cause poor operation of this system. • Extended use of recirculation may cause the windows to fog. If the interior of the windows begins to fog, press the Recirculation button to return to outside air.
UNDERSTANDING YOUR INSTRUMENT PANEL 287 4
288 UNDERSTANDING YOUR INSTRUMENT PANEL The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control knob (on the right) to one of the following positions. • Defrost Air is directed to the windshield through the outlets at the base of the windshield. Air is also directed to the front door windows through the side window demister grilles. • Defrost/Floor Air flows through the front and rear floor outlets and the outlets at the base of the windshield.
UNDERSTANDING YOUR INSTRUMENT PANEL turn off the air conditioning. An LED in the button illuminates when manual compressor operation is selected. NOTE: To control the air conditioning manually, the mode selector must be moved out of the AUTO position. • Recirculation Control This button can be used to block out smoke, odors, dust, high humidity, or if rapid cooling is desired. The recirculation mode should only be used temporarily. An LED in the button illuminates when the recirculation mode is active.
290 UNDERSTANDING YOUR INSTRUMENT PANEL Winter Operation Use of the air Recirculation mode during winter months is not recommended because it may cause window fogging. windshield and provide sufficient heating. If side window fogging becomes a problem, increase blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather. Vacation Storage Anytime you store your vehicle, or keep it out of service (i.e.
UNDERSTANDING YOUR INSTRUMENT PANEL 291 Control Setting Suggestions for Various Weather Conditions 4
292 UNDERSTANDING YOUR INSTRUMENT PANEL REAR WINDOW FEATURES Electric Rear Window Defroster The Electric Rear Window Defroster control is located on the climate control. Press this button to turn ON the rear window defroster and the heated outside rearview mirrors (if equipped). An LED in the button will illuminate when the rear window defroster is ON. The defroster automatically turns off after approximately 10 minutes. For five more minutes of operation, press of the button again.
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . . 297 ▫ Automatic Transmission . . . . . . . . . . . . . . . . 298 ▫ Normal Starting (Tip Start) . . . . . . . . . . . . . . 299 ▫ Automatic Transmission — General Information . . . . . . . . . . . . . . . . . . . . . . . . . 302 ▫ Brake/Transmission Shift Interlock System . . . 304 ▫ 5-Speed Automatic Transmission . . . . . . . . . . 305 ▫ Extremely Cold Weather (Below ⫺20°F Or ⫺29°C) . . . . . . . . . . . . . .
294 STARTING AND OPERATING ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312 ▫ Synchronizing ESP . . . . . . . . . . . . . . . . . . . . 326 䡵 Driving Through Water . . . . . . . . . . . . . . . . . . 313 ▫ ESP/BAS Malfunction Indicator Light And ESP/TCS Indicator Light . . . . . . . . . . . . . . . . 327 ▫ Flowing/Rising Water . . . . . . . . . . . . . . . . . . 313 ▫ Shallow Standing Water . . . . . . . . . . . . . . . . . 313 䡵 Parking Brake . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 295 ▫ Life Of Tire . . . . . . . . . . . . . . . . . . . . . . . . . 341 䡵 Fuel Requirements . . . . . . . . . . . . . . . . . . . . . . 357 ▫ Replacement Tires . . . . . . . . . . . . . . . . . . . . . 342 ▫ 6.1L Engine . . . . . . . . . . . . . . . . . . . . . . . . . 357 ▫ Alignment And Balance . . . . . . . . . . . . . . . . . 343 ▫ Reformulated Gasoline . . . . . . . . . . . . . . . . . 358 䡵 Tire Chains . . . . . . . . . . . . . . . . . . . . . . . . . . .
296 STARTING AND OPERATING ▫ Gross Vehicle Weight Rating (GVWR) . . . . . . . 364 䡵 Recreational Towing (Behind Motorhome, Etc.) . . 367 ▫ Gross Axle Weight Rating (GAWR) . . . . . . . . . 364 ▫ Towing This Vehicle Behind Another Vehicle (Flat Towing With All Four Wheels On The Ground) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367 ▫ Overloading . . . . . . . . . . . . . . . . . . . . . . . . . 365 ▫ Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365 䡵 Trailer Towing . .
STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. 297 WARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in the ignition.
298 STARTING AND OPERATING Automatic Transmission The shift lever must be in the NEUTRAL or PARK position before you can start the engine. Apply the brakes before shifting into any driving gear. CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
STARTING AND OPERATING Normal Starting (Tip Start) NOTE: Normal Starting of either a cold or a warm engine is obtained without pumping or depressing the accelerator pedal. Do not press the accelerator. Use the Fob with Integrated Key to briefly turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running.
300 STARTING AND OPERATING If Engine Fails To Start WARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury. • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way.
STARTING AND OPERATING After Starting The idle speed is controlled automatically and it will decrease as the engine warms up. ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded, three-wire extension cord. The engine block heater cord is routed under the hood on the driver side of the vehicle.
302 STARTING AND OPERATING WARNING! It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal.
STARTING AND OPERATING • The electronically-controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating. Therefore, the first few shifts on a new vehicle may be somewhat abrupt or soft until after the break-in period. This is a normal condition, and precision shifts will develop within a few shift cycles. The shift lever is automatically locked while in the PARK position.
304 STARTING AND OPERATING Over-Temperature Mode The transmission electronics constantly monitor the transmission oil temperature. If the transmission exceeds normal operating temperature, the transmission will change the way it shifts to help control the condition. This may result in a slightly different feeling or response during normal operation in DRIVE position. After the transmission cools down, it will return to normal operation. system malfunction occurs (i.e., dead battery).
STARTING AND OPERATING 305 To activate the override, first insert the key into the ignition switch and turn it to the ACC or ON position. Then, press the pink-colored tab trough the access pot with a small flat blade screwdriver or alike. While pressing the override, move the shift lever out of the PARK position. When complete, return the rubber tray to its original position.
306 STARTING AND OPERATING When parking on a flat surface, place the shift lever in the PARK position first, and then apply the parking brake. The following indicators should be used to ensure that you have engaged the shift lever in the PARK position: When parking on a hill, it is important to set the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK.
STARTING AND OPERATING REVERSE Shift into REVERSE gear only when the vehicle is completely stopped. NEUTRAL In NEUTRAL, no power is transmitted from the engine to the drive axle. When the brakes are released, the vehicle can be moved freely (pushed or towed). Do not engage NEUTRAL position while driving except to coast when the vehicle is in danger of skidding (e.g., on icy roads). The engine may be started in this range. Use this range for starting your vehicle if it is moving or being towed.
308 STARTING AND OPERATING When frequent transmission shifting occurs when using the Overdrive range, such as when operating the vehicle under heavy loading conditions (in hilly terrain, traveling into strong head winds, or while towing heavy trailers, use the AutoStick威 mode and select the “3” range. AutoStick威 Gear Selection The AutoStick威 feature can be selected by pressing the shift lever to the right or the left with the lever in the DRIVE position.
STARTING AND OPERATING 309 Delayed Shifts in Cold Temperatures During cold temperature operation, you may notice delayed upshifts depending on engine and transmission temperature as well as vehicle speed. This feature improves warm up time of the engine and transmission to achieve maximum efficiency. A reset feature is available to allow the vehicle to be driven to an authorized dealer for service.
310 STARTING AND OPERATING Have the transmission checked at your authorized dealer as soon as possible. If the problem has been momentary, the transmission can be reset to regain all forward gears. Permanent Transmission Limp Home Mode Permanent Limp Home Mode will be activated if the transmission enters temporary Limp Home Mode three times. Follow the reset procedure described under “Temporary Transmission Limp Home Mode” in this section.
STARTING AND OPERATING NOTE: • In Autostick威 mode, the transmission will only shift up and down when the driver manually moves the shift lever Right (D+) or Left (D-). • An UPSHIFT message will appear in the Electronic Vehicle Information Center (EVIC) portion of the instrument cluster when using Autostick威. This message appears in order to alert the driver to upshift to the next gear. The UPSHIFT message will display while operating the vehicle at higher engine revolutions per minute (RPM).
312 STARTING AND OPERATING • Transmission shifting will be more noticeable when Autostick威 is engaged. DRIVING ON SLIPPERY SURFACES Acceleration Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the rear wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in the surface traction under the rear (driving) wheels. WARNING! Rapid acceleration on slippery surfaces is dangerous.
STARTING AND OPERATING DRIVING THROUGH WATER Driving through water more than a few inches/ millimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising Water WARNING! Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water. Furthermore, flowing and/or rising water can carry your vehicle away swiftly.
314 STARTING AND OPERATING CAUTION! WARNING! • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water. Do not continue to operate the vehicle if any fluid appears contaminated, as this may result in further damage.
STARTING AND OPERATING PARKING BRAKE The parking brake should always be applied when the driver is not in the vehicle. WARNING! Never use PARK position on an automatic transmission as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. When parking on a flat surface, place the shift lever in the PARK position first and then apply the parking brake.
316 STARTING AND OPERATING NOTE: This light only shows that the parking brake is applied. It does not show the degree of brake application. WARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in the ignition. A child could operate power windows, other controls, or move the vehicle.
STARTING AND OPERATING BRAKE SYSTEM Your vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability, the remaining system will still function. There will be some loss of overall braking effectiveness. This may be evident by increased pedal travel during application, greater pedal force required to slow or stop, and potential activation of the Brake Warning Light.
318 STARTING AND OPERATING ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can include ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops. You also may experience the following when the brake system goes into Anti-lock: WARNING! • The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment.
STARTING AND OPERATING All vehicle wheels and tires must be the same size and type and tires must be properly inflated to produce accurate signals for the computer. Anti-Lock Brake Light The ABS light monitors the Anti-Lock Brake System. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds.
320 STARTING AND OPERATING Upon initial start-up in cold weather, the power steering pump may make noise for a short amount of time. This is due to the cold, thick fluid in the steering system. This noise should be considered normal, and it does not in any way damage the steering system. WARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible.
STARTING AND OPERATING ABS (Anti-Lock Brake System) This system aids the driver in maintaining vehicle control under adverse braking conditions by controlling hydraulic brake pressure. This prevents wheel lock-up to help avoid skidding on slippery surfaces during braking. For more information about ABS, refer to “Anti-Lock Brake System” in Section 5.
322 STARTING AND OPERATING TCS (Traction Control System) This system monitors the amount of wheel spin of each driven wheel. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. stopping sequence. Do not reduce brake pedal pressure unless braking is no longer desired. Once the brake pedal is released, the BAS is deactivated.
STARTING AND OPERATING ESP (Electronic Stability Program) This system enhances directional control and stability of the vehicle under various driving conditions. The ESP corrects for oversteering and understeering the vehicle by applying the brake of the appropriate wheel. Engine power may also be reduced to assist in counteracting the condition of oversteer or understeer and help the vehicle maintain the desired path.
324 STARTING AND OPERATING WARNING! The ESP (Electronic Stability Program) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The ESP cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
STARTING AND OPERATING NOTE: To improve the vehicle’s traction when driving with snow chains, or when starting-off in deep snow, sand, or gravel, it may be desirable to switch to the “Partial Off” mode by momentarily depressing the “ESP OFF” button. Once the situation requiring “Partial Off” mode is overcome, turn the ESP ON again by momentarily depressing the “ESP OFF” button. This may be done while the vehicle is in motion.
326 STARTING AND OPERATING NOTE: When the ESP is switched off a feature of the system remains active. This feature controls wheel spin across an axle quite similarly to a limited slip differential. If one wheel on an axle is spinning faster than the other, the system will apply the brake of the spinning wheel and allow more engine torque to be applied to the wheel that is not spinning.
STARTING AND OPERATING 327 Indicator Light should go out. However, if the light remains on, have the ESP and BAS checked at your authorized dealer as soon as possible. ESP is synchronized (refer to Synchronizing ESP), see your authorized dealer as soon as possible to have the problem diagnosed and corrected. ESP/BAS Malfunction Indicator Light and ESP/TCS Indicator Light The Malfunction Indicator Light for the ESP is combined with the BAS indicator.
328 STARTING AND OPERATING TIRE SAFETY INFORMATION Tire Markings • European Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter ⬙P⬙ is absent from this tire size designation. Example: 215/65R15 96H • LT (Light Truck)-Metric tire sizing is based on U.S. design standards.
STARTING AND OPERATING 329 Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%). —Ratio of section height to section width of tire 10.
330 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, 331 located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
332 STARTING AND OPERATING Tire Loading and Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side B-pillar.
STARTING AND OPERATING Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard and in the “Vehicle Loading” section of this manual.
334 STARTING AND OPERATING 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) {(since 5 x 150 = 750, and 1400 – 750 = 650 lbs (295 kg)}. 5. Determine the combined weight of luggage and cargo being loaded on the vehicle.
STARTING AND OPERATING 335 5
336 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle. Three primary areas are affected by improper tire pressure: 1.
STARTING AND OPERATING 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Under-inflation, also increases tire rolling resistance and results in higher fuel consumption. 337 maximum loaded vehicle condition. These pressure conditions will be found in the “Supplemental Tire Pressure Information” section of this manual. 3.
338 STARTING AND OPERATING check tire pressure. Do not make a visual judgement when determining proper inflation. Radial tires may look properly inflated even when they are under-inflated. CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.
STARTING AND OPERATING Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle operation.
340 STARTING AND OPERATING Tire Spinning When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 35 mph (55 km/h). Refer to the paragraph on “Freeing A Stuck Vehicle” in Section 6. WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone.
STARTING AND OPERATING These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Many states have laws requiring tire replacement at this point.
342 STARTING AND OPERATING Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manufacturer strongly recommends that you use tires equivalent to the originals in size, quality and performance when replacement is needed. (Refer to the paragraph on “Tread Wear Indicators”). Refer to the “Tire and Loading Information” placard for the size designation of your tire.
STARTING AND OPERATING CAUTION! Replacing original tires with tires of a different size may result in false speedometer and odometer readings. Alignment And Balance Poor suspension alignment may result in: • Fast tire wear. • Uneven tire wear, such as feathering and one-sided wear. • Vehicle pull to right or left. Tires may also cause the vehicle to pull to the left or right. Alignment will not correct this condition. See your authorized dealer for proper diagnosis.
344 STARTING AND OPERATING CAUTION! To avoid damage to your vehicle or tires, observe the following precautions: • Because of restricted chain clearance between tires and other suspension components, it is important that only chains in good condition are used. Broken chains can cause serious damage. Stop the vehicle immediately if noise occurs that could indicate chain breakage. Remove the damaged parts of the chain before further use.
STARTING AND OPERATING If you need snow tires, select tires equivalent in size and type to the original equipment tires. Use snow tires only in sets of four. Failure to do so may adversely affect the safety and handling of your vehicle. Snow tires generally have lower speed ratings than what was originally equipped with your vehicle and should not be operated at sustained speeds over 75 mph (120 km/h).
346 STARTING AND OPERATING Tire Rotation — All Season Tires The suggested rotation method for vehicles equipped with all season tires is the “forward-cross” as shown in the following diagram.
STARTING AND OPERATING TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED • The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. • The tire pressure will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C). This means that when the outside temperature decreases, the tire pressure will decrease. Tire pressure should always be set based on cold inflation tire pressure.
348 STARTING AND OPERATING vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. − For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), a temperature drop to 20°F (-7°C) will decrease the tire pressure to approximately 26 psi (179 kPa).
STARTING AND OPERATING NOTE: • The TPMS is not intended to replace normal tire care and maintenance or to provide warning of a tire failure or condition. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure. • Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.
350 STARTING AND OPERATING The matching full size spare wheel and tire assembly (if equipped) has a tire pressure monitoring sensor. The matching full size spare can be used in place of any of the four road tires. The TPMS will only monitor the pressure in the full size spare when it is used in place of a road tire. Otherwise, a spare with a pressure below the lowpressure limit will not cause the Tire Pressure Monitoring Telltale Light to illuminate or the chime to sound.
STARTING AND OPERATING 3. Accumulation of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors. NOTE: Vehicles with Full Size Spare 1. The matching full size spare wheel and tire assembly has a tire pressure monitoring sensor that can be monitored by the TPMS. 2.
352 STARTING AND OPERATING 5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically and the TPM Telltale Light will turn OFF, as long as no tire pressure is below the low-pressure warning limit in any of the four active road tires. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information.
STARTING AND OPERATING Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Light will illuminate in the instrument cluster and a chime will sound when tire pressure is low in one or more of the four active road tires. In addition, the EVIC will display one or more low pressure messages (Left Front, Left Rear, Right Front, Right Rear) for three seconds and a graphic showing the pressure values of each tire with the low tire pressure values flashing.
354 STARTING AND OPERATING Should this occur, you should stop as soon as possible and inflate the tires with low pressure (those flashing in the EVIC graphic) to the vehicle’s recommended cold placard pressure value. Once the system receives the updated tire pressures, the system will automatically update, the graphic display in the EVIC will stop flashing, and the Tire Pressure Monitoring Telltale Light will turn off.
STARTING AND OPERATING If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the Tire Pressure Monitoring Telltale Light will no longer flash, and the ⬙CHECK TPM SYSTEM⬙ message will no longer display, and a pressure value will display in place of the dashes. A system fault can occur due to any of the following: 1.
356 STARTING AND OPERATING NOTE: Vehicles with Compact Spare 1. The compact spare tire does not have a tire pressure monitoring sensor. Therefore, the TPMS will not monitor the pressure in the compact spare tire. 2. If you install the compact spare tire in place of a road tire that has a pressure below the low-pressure warning limit, upon the next ignition key cycle, the TPM Telltale Light will remain ON and a chime will sound.
STARTING AND OPERATING General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. The tire pressure sensors are covered under one of the following licenses: United States . . . . . . . . . . . . . . . . . . . . . KR5S120123 Canada . . . . . . . . . . . .
358 STARTING AND OPERATING necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufacturer recommends the use of gasolines that meet the WWFC specifications, if they are available. Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline referred to as reformulated gasoline. Reformulated gasolines contain oxygenates and are specifically blended to reduce vehicle emissions and improve air quality.
STARTING AND OPERATING Problems that result from using methanol/gasoline or E85 ethanol blends are not the responsibility of the manufacturer. While MTBE is an oxygenate made from methanol, it does not have the negative effects of methanol. MMT In Gasoline MMT is a manganese-containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT.
360 STARTING AND OPERATING • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service. Contact your authorized dealer for service assistance.
STARTING AND OPERATING 361 • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. • Keep the trunk/liftgate closed when driving your vehicle to prevent carbon monoxide and other poisonous exhaust gases from entering the vehicle.
362 STARTING AND OPERATING NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinforcement. CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the Malfunction Indicator Light (MIL) to turn on.
STARTING AND OPERATING WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. NOTE: • Tighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is tightened properly.
364 STARTING AND OPERATING VEHICLE LOADING The load carrying capacity of your vehicle is shown on the “Vehicle Certification Label.” This information should be used for passenger and luggage loading as indicated. Do not exceed the specified Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Vehicle Certification Label Your vehicle has a Vehicle Certification Label affixed to the rear of the driver’s door.
STARTING AND OPERATING WARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have an accident. Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and the front and rear GAWR.
366 STARTING AND OPERATING A loaded vehicle is shown in the illustration. Note that neither the GVWR nor the GAWR capacities have been exceeded.
STARTING AND OPERATING TRAILER TOWING Trailer towing with this vehicle is not recommended. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat Towing With All Four Wheels On The Ground) Recreational towing for this vehicle is not recommended. NOTE: If the vehicle requires towing, make sure all four wheels are off the ground.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flasher . . . . . . . . . . . . . . . . . . 370 ▫ Without The Ignition Key . . . . . . . . . . . . . . . 381 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . . 371 ▫ Towing This Vehicle Behind Another Vehicle (Flat Towing With All Four Wheels On The Ground) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381 䡵 TIREFIT Tire Repair . . . . . . . . . . . . . . . . . . . . . 372 䡵 Jump-Starting Procedures . . . . . . . . . . . . . . . . .
370 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The HAZARD switch is located in the center of the instrument panel between the center air outlets. Depress the switch to activate the flashers. When activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Push the switch a second time to turn off the flashers. This is an emergency warning system and it should not be used when the vehicle is in motion.
WHAT TO DO IN EMERGENCIES IF YOUR ENGINE OVERHEATS In any of the following situations, you can reduce the potential for overheating by taking the appropriate action. • On the highways — Slow down. • In city traffic — While stopped, put transmission in NEUTRAL, but do not increase engine idle speed. NOTE: There are steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off.
372 WHAT TO DO IN EMERGENCIES WARNING! The TIREFIT system is located under an access panel in the trunk. A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to Section 7 and follow the warnings under the Cooling System Pressure Cap paragraph.
WHAT TO DO IN EMERGENCIES 373 WARNING! • Do not attempt to repair a tire on the side of the vehicle close to traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or repairing a tire. • Cuts or punctures larger than approximately 0.16 in. (4 mm), tire damage caused by driving with extremely low tire pressure or on a flat tire, or a damaged wheel can pose a hazard while driving. TIREFIT should not be used in such circumstances.
374 WHAT TO DO IN EMERGENCIES Sealing tire with TIREFIT Turn on the hazard warning flashers. 1. Move the shift lever to the PARK position, turn off the engine, and set the parking brake. 2. Remove the TIREFIT kit from the trunk. 3. Pull the power plug (2) and the TIREFIT sealant hose (6) out from the TIREFIT kit. 4. Unscrew the valve cap from the valve on the deflated tire. 5. Screw the fitting at the end of TIREFIT sealant hose (6) coming from the sealant bottle (5) onto the tire valve. 6.
WHAT TO DO IN EMERGENCIES 14. Disconnect the air pump hose (1) from the underside of the sealant bottle (5) by flipping the hose valve open. 15. Connect the air pump hose valve to the tire valve and flip the hose valve closed. 375 19. Release the parking brake and drive the vehicle for approximately 10 minutes to ensure optimum distribution of the tire sealant within the tire. 20. Turn on the hazard warning flashers. 16. Leave the parking brake set and the shift lever in PARK and start the engine. 21.
376 WHAT TO DO IN EMERGENCIES 25. Leave the parking brake set and the shift lever in PARK and start the engine. 26. Inflate the tire to the pressure indicated on the tire pressure label on the driver-side latch pillar by pressing the switch (3) on the air pump to I (ON) and watching the pressure gauge. When the tire pressure is set to the pressure indicated on the tire pressure label, press the AIR PUMP switch (3) to 0 (OFF) and turn off the engine. NOTE: • If a pressure of at least 19 psi (1.
WHAT TO DO IN EMERGENCIES JUMP-STARTING PROCEDURES WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be hurt by the fan. • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
378 WHAT TO DO IN EMERGENCIES 3. Set the parking brake, place the automatic transmission in PARK, and turn the ignition switch to the LOCK position on both vehicles. 4. Turn off the heater, radio, and all unnecessary electrical loads. 5. Connect one end of the jumper cable to the remote jump-start positive battery post (+) in the engine compartment. Connect the other end of the same cable to the positive terminal of the booster battery. Refer to the following illustration for jump-starting connections. 6.
WHAT TO DO IN EMERGENCIES WARNING! • You should not try to start your vehicle by pushing or towing. • Do not connect the cable to the negative post of the discharged battery. The resulting electrical spark could cause the battery to explode. • During cold weather when temperatures are below the freezing point, electrolyte in a discharged battery may freeze. Do not attempt jump-starting because the battery could rupture or explode.
380 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between REVERSE and DRIVE. Usually, the least accelerator pedal pressure to maintain the rocking motion without spinning the wheels is most effective. NOTE: Turn off the Electronic Stability Program (ESP) before rocking the vehicle.
WHAT TO DO IN EMERGENCIES WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck, and don’t let anyone near a spinning wheel, no matter what the speed. TOWING A DISABLED VEHICLE Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position.
382 WHAT TO DO IN EMERGENCIES CAUTION! • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result. • If the transmission is not operative or if the vehicle is to be towed more than 30 mi (48 km), then the only approved method of towing is with a flat-bed truck. Damage to the transmission may result. • Do not tow the vehicle from the rear. Damage to the rear sheet metal and fascia will occur.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 6.1L Engine Compartment . . . . . . . . . . . . . . . . 386 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . . 393 䡵 Onboard Diagnostic System — OBD II . . . . . . . . 387 ▫ Drive Belts — Check Condition And Tension . . 393 ▫ Loose Fuel Filler Cap . . . . . . . . . . . . . . . . . . 387 ▫ Spark Plugs . . . . . . . . . . . . . . . . . . . . . . . . . 394 䡵 Emissions Inspection And Maintenance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . .
384 MAINTAINING YOUR VEHICLE ▫ Power Steering — Fluid Check . . . . . . . . . . . . 400 ▫ Front And Rear Suspension Ball Joints . . . . . . 401 ▫ Steering Linkage . . . . . . . . . . . . . . . . . . . . . . 401 ▫ Body Lubrication . . . . . . . . . . . . . . . . . . . . . 401 ▫ Windshield Wiper Blades . . . . . . . . . . . . . . . . 402 ▫ Windshield Washers/Headlight Washers . . . . . 402 ▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . . 403 ▫ Cooling System . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 385 䡵 Fluids And Capacities . . . . . . . . . . . . . . . . . . . 435 ▫ Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436 䡵 Fluids, Lubricants, And Genuine Parts . . . . . . . . 436 ▫ Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . .
386 MAINTAINING YOUR VEHICLE 6.
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
388 MAINTAINING YOUR VEHICLE TRIP ODOMETER button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the MIL. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system. Failure to pass could prevent vehicle registration.
MAINTAINING YOUR VEHICLE 389 5. Approximately 15 seconds later, one of two things will happen: system to update. A recheck with the above test routine may then indicate that the system is now ready. a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition key or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
390 MAINTAINING YOUR VEHICLE AUTHORIZED DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service manuals are available which include detailed service information for your vehicle. Refer to these manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you.
MAINTAINING YOUR VEHICLE 391 Engine Oil Checking Oil Level To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off or before starting the engine after it has sat overnight. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level readings.
392 MAINTAINING YOUR VEHICLE Change Engine Oil Refer to the Maintenance Schedule in Section 8. NOTE: Under no circumstances should oil change intervals exceed 6,000 mi (10 000 km) or six months, whichever occurs first.
MAINTAINING YOUR VEHICLE The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to the “Engine Compartment” illustration in this section. 393 Engine Oil Filter The engine oil filter should be replaced at every engine oil change. Materials Added to Engine Oil The manufacturer strongly recommends against the addition of any additives (other than leak detection dyes) to the engine oil.
394 MAINTAINING YOUR VEHICLE Inspect belts for evidence of cuts, cracks, glazing, or frayed cords and replace if there is indication of damage that could result in belt failure. Also, check belt routing to make sure there is no interference between the belts and other engine components. See your authorized dealer for service. Engine Air Cleaner Filter Refer to the Maintenance Schedule in Section 8 for engine air cleaner filter maintenance intervals.
MAINTAINING YOUR VEHICLE Fuel Filter A plugged fuel filter can cause stalling, limit the speed at which a vehicle can be driven or cause hard starting. Should an excessive amount of dirt accumulate in the fuel tank, filter replacement may be necessary. See your authorized dealer for service. Catalytic Converter The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control device.
396 MAINTAINING YOUR VEHICLE WARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situations involving grossly malfunctioning engine operation, a scorching odor may indicate severe and abnormal catalyst overheating.
MAINTAINING YOUR VEHICLE 397 Maintenance-Free Battery The top of the maintenance-free battery is permanently sealed. You will never have to add water, nor is periodic maintenance required. NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals are located in the engine compartment for jump-starting.
398 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. 399 WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system.
400 MAINTAINING YOUR VEHICLE Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment.
MAINTAINING YOUR VEHICLE WARNING! Fluid level should be checked on a level surface and with the engine OFF to prevent injury from moving parts and to ensure accurate fluid level reading. Do not overfill. Use only manufacturer’s recommended power steering fluid. If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.
402 MAINTAINING YOUR VEHICLE The external lock cylinders should be lubricated twice a year, preferably in the Fall and Spring. Apply a small amount of a high quality lubricant such as Mopar威 Lock Cylinder Lubricant or equivalent directly into the lock cylinder. Windshield Wiper Blades The rubber edges of the wiper blades and the windshield should be cleaned periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt or road film.
MAINTAINING YOUR VEHICLE The fluid reservoir will hold nearly 1 gal (4 l) of washer fluid when the message “Low Washer Fluid” appears in the Electronic Vehicle Information Center (EVIC). WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
404 MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the LOCK position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • You or others can be badly burned by hot coolant or steam from your radiator. If you see or hear steam coming from under the hood, don’t open the hood until the radiator has had time to cool.
MAINTAINING YOUR VEHICLE drain from the coolant recovery bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT. Cooling System — Drain, Flush, and Refill The system should be drained, flushed, and refilled at the intervals shown in the “Maintenance Schedule” in Section 8. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals.
406 MAINTAINING YOUR VEHICLE Adding Coolant Your vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to five years or 100,000 mi (160 000 km) before replacement. To prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. Please review these recommendations for using Hybrid Organic Additive Technology (HOAT) coolant.
MAINTAINING YOUR VEHICLE The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.
408 MAINTAINING YOUR VEHICLE The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for coolant freeze point or replacing coolant. Advise your service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill.
MAINTAINING YOUR VEHICLE • Make sure that the radiator and coolant recovery bottle overflow hoses are not kinked or obstructed. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also. • Do not change the thermostat for Summer or Winter operation. If replacement is ever necessary, install ONLY the correct type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions.
410 MAINTAINING YOUR VEHICLE You are urged to use only the manufacturer’s specified hoses with quick connect fittings, or their equivalent in material and specification, in any fuel system servicing. It is mandatory to replace any damaged hoses or quick connect fittings that have been removed during service. Care should be taken with installing quick connect fittings to ensure they are properly installed and fully connected. See your authorized dealer for service.
MAINTAINING YOUR VEHICLE Ensure nylon tubing in these areas has not melted or collapsed. Inspect all hose connections such as clamps and couplings to make sure they are secure and no leaks are present. NOTE: • Often, fluid such as oil, power steering fluid, and brake fluid are used during assembly plant operations to facilitate the assembly of hoses to couplings. Therefore, oil wetness at the hose-coupling area is not necessarily an indication of leakage.
412 MAINTAINING YOUR VEHICLE Clean the top of the master cylinder area before removing the cap. Add fluid to bring the level up to the top of the “FULL” mark on the side of the master cylinder reservoir. Overfilling of fluid is not recommended because it may cause leaking in the system. Add enough fluid to bring the level up to the requirements described on the brake fluid reservoir. With disc brakes, fluid level can be expected to fall as the brake pads wear.
MAINTAINING YOUR VEHICLE 413 CAUTION! CAUTION! Do not allow petroleum-based fluid to contaminate the brake fluid. Seal damage may result. • Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will result in more frequent fluid and filter changes.
414 MAINTAINING YOUR VEHICLE Fluid and Filter Changes Refer to the Maintenance Schedule in Section 8 for the recommended transmission fluid and filter change intervals. If the transmission is disassembled for any reason, the fluid and filter should be changed. Selection of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission performance. Use only manufacturer’s recommended transmission fluid.
MAINTAINING YOUR VEHICLE highly corrosive to the metal in your vehicle. Outside parking, which exposes your vehicle to airborne contaminants, road surfaces on which the vehicle is operated, extreme hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and underbody protection. The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle.
416 MAINTAINING YOUR VEHICLE CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder that will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. • It is important that the drain holes in the lower edges of the doors, rocker panels, and trunk be kept clear and open.
MAINTAINING YOUR VEHICLE heavy soil and/or excessive brake dust, use Mopar威 Wheel Cleaner (05066247AB) or equivalent or select a nonabrasive, non-acidic cleaner. Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Only Mopar威 or equivalent is recommended. Do not use oven cleaner. Avoid automatic car washes that use acidic solutions or harsh brushes that may damage the wheels’ protective finish.
418 MAINTAINING YOUR VEHICLE Cleaning Headlights Your vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. quarter window equipped with the radio antenna. Do not use scrapers or other sharp instrument that may scratch the elements. Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed. When cleaning the rear view mirror, spray cleaner on the towel or rag that you are using.
MAINTAINING YOUR VEHICLE Seat Belt Maintenance Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. 419 FUSES (POWER DISTRIBUTION CENTERS) Fuses (Front Power Distribution Center) A power distribution center is located in the engine compartment. This center contains fuses and relays. If the belts need cleaning, use Mopar威 Total Clean, a mild soap solution, or lukewarm water.
420 MAINTAINING YOUR VEHICLE CAUTION! • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
MAINTAINING YOUR VEHICLE Cavity 10 11 12 13 14 15 Cartridge Fuse 30 Amp Pink 30 Amp Pink 40 Amp Green 50 Amp Red — 50 Amp Red MiniFuse Description Cavity — Windshield Wiper — Anti-lock Brake System (ABS) Valves Radiator Fan 16 17 18 19 20 21 22 — — — — Anti-lock Brake System (ABS) Pump Motor — Radiator Fan Cartridge Fuse — — — — — — — MiniFuse Description — — — — — — — — — — — — — — 421 7
422 MAINTAINING YOUR VEHICLE Fuses (Rear Power Distribution Center) There is also a power distribution center located in the trunk under the spare tire access panel. This center contains fuses and relays.
MAINTAINING YOUR VEHICLE CAUTION! • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
424 MAINTAINING YOUR VEHICLE Cavity 8 Cartridge Fuse — 9 — 10 11 * 12 * 13 * 14 — — — — — 15 16 — — MiniFuse Description 15 Amp Diagnostic Link ConnecBlue tor (DLC)/Wireless Control Module (WCM)/ Wireless Ignition Node (WIN) 20 Amp Power Outlet Yellow — — — — — — — — 10 Amp AC Heater Control/ Red Cluster/Security Module - if equipped — — — — Cavity 17 Cartridge Fuse — 18 — 19 — 20 21 22 23 24 25 26 27 — — — — — — — — MiniFuse Description 20 Amp Yellow 20 Amp Yellow 10 Amp Red — — —
MAINTAINING YOUR VEHICLE Cavity 28 Cartridge Fuse — 29 — 30 — 31 32 33 34 — — — — MiniFuse Description 10 Amp Ignition Run Red 5 Amp Adaptive Cruise Control Orange (ACC) - if equipped/ Cluster/Electronic Stability Program (ESP)/ Powertrain Control Module (PCM)/STOP LIGHT Switch 10 Amp Door Modules/Power Red Mirrors/Steering Control Module (SCM) — — — — — — — — Cavity 35 Cartridge Fuse — 36 — 37 — 38 — MiniFuse 425 Description 5 Amp Orange Antenna Module - if equipped/Power Mirrors/
426 MAINTAINING YOUR VEHICLE Cavity 39 40 41 42 43 Cartridge Fuse — MiniFuse 10 Amp Red 5 Amp Orange Description Heated Mirrors - if equipped — Auto Inside Rearview Mirror/Heated Seats - if equipped/Switch Bank — 10 Amp AC Heater Control/ Red Headlights/Park Assist if equipped/Tire Pressure Monitoring - if equipped/Occupant Restraint Controller (ORC) 30 Amp — Front Blower Motor Pink 30 Amp — Rear Window Defroster Pink Cavity 44 CarMinitridge Fuse Fuse 20 Amp — Blue Description Amplifier - if e
MAINTAINING YOUR VEHICLE VEHICLE STORAGE If you are leaving your vehicle dormant for more than 21 days, you may want to take these steps to protect your battery. • Disconnect the negative cable from the battery. • Anytime you store your vehicle, or keep it out of service (i.e., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air and high blower setting.
428 MAINTAINING YOUR VEHICLE LIGHT BULBS — Exterior Bulb Number Low Beam Headlight – High Intensity Discharge (HID) . . . . . . . . . . D1S (Serviced at Authorized Dealer) High Beam Headlight. . . . . . . . . . . . . . . . . . . . . 9005 Front Park/Turn Light . . . . . . . . . . . . . . . . . . 3157AK Front Fog Light. . . . . . . . . . . . . . . . . . . . . . 9145/H10 (Serviced at Authorized Dealer) Front Side Marker . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 429 NOTE: When HID headlights are turned on, there is a blue hue to the lights. This diminishes and becomes more white after approximately 10 seconds, as the system charges. 1. Open the hood. NOTE: Removal of the air cleaner filter housing may be necessary prior to replacing bulbs in the headlight assembly on the driver side of the vehicle. 2. Twist the appropriate bulb and socket assembly counterclockwise, and then pull it out of the headlight assembly. 3.
430 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol.
MAINTAINING YOUR VEHICLE 431 Tail/Stop, Tail, Turn Signal Light, and Backup Light 4. Remove the remaining fastener from the back of the tail light assembly. 1. Open the Trunk. 5. Push the electrical connector locking tab to the side. 2. Remove two fasteners from the back of the tail light assembly. 6. Disconnect the electrical connector. 7 3. Pull back the trunk liner.
432 MAINTAINING YOUR VEHICLE 7. Pull the tail light assembly clear from the vehicle to access the bulbs. Turn bulb sockets counterclockwise to remove. 8. Turn the appropriate bulb and socket assembly counterclockwise to remove it from the tail light assembly.
MAINTAINING YOUR VEHICLE 3 — Turn Signal Light Bulb 433 4 — Backup Light Bulb 9. Disconnect the bulb from the socket assembly and install the replacement bulb. 10. Reinstall the bulb and socket assembly into the tail light assembly, and then turn it clockwise.
434 MAINTAINING YOUR VEHICLE 11. Reinstall the tail light assembly, fasteners, electrical connector, and trunk liner. 12. Close the trunk. License Light 1. Remove the screws securing the light to the rear fascia. 2. Remove the bulb and socket assembly. 3. Disconnect the bulb from the socket assembly and install the replacement bulb. 1 — License Light Bulb 2 — Socket 4. Reinstall the bulb and socket assembly. 5. Reattach the light to the rear fascia, and then install the screws.
MAINTAINING YOUR VEHICLE 435 FLUIDS AND CAPACITIES U.S. Metric Fuel (approximate) 6.1 Liter Engine 19 gal 72 l Engine Oil with Filter 6.1 Liter Engine (SAE 0W-40) 7 qts 6.6 liters Cooling System * 6.1 Liter Engine (Mopar威 15.2 qts 14.4 l Antifreeze/Coolant 5 Year/ 100,000 Mile Formula) or equivalent * Includes heater and coolant recovery bottle filled to MAX level.
436 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil (6.1L) Oil Filter (6.1L) Spark Plugs (6.1L) Fuel Selection (6.
MAINTAINING YOUR VEHICLE 437 Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir Rear Axle Fluids, Lubricants, and Genuine Parts Mopar威 ATF+4 Automatic Transmission Fluid Mopar威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids.
MAINTENANCE SCHEDULES CONTENTS M A I N T E N A N C E 䡵 Emissions Control System Maintenance . . . . . . . 440 ▫ Severe Duty . . . . . . . . . . . . . . . . . . . . . . . . . 442 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . . 440 ▫ Required Maintenance Intervals . . . . . . . . . . .
M A I N T E N A N C E 440 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services, listed in bold type , must be done at the times or mileages specified to ensure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
MAINTENANCE SCHEDULES At Each Stop for Fuel • Check the engine oil level. Refer to “Engine Oil” under “Maintenance Procedures” in Section 7. • Check the windshield washer solvent and add if required. 441 M At Each Oil Change • Change the engine oil filter. • Inspect the brake hoses and lines. Once a Month • Check tire pressure and look for unusual wear or damage. • Inspect the battery, and clean and tighten the terminals as required.
M A I N T E N A N C E S C H E D U L E S 8 442 MAINTENANCE SCHEDULES Severe Duty If your vehicle is operated under the Severe Duty conditions listed below change your engine oil and filter every 3,000 mi (5 000 km) or three months as indicated in the Maintenance Schedule. • Stop and go driving. • Driving in dusty conditions. • Short trips of less than 10 mi (16 km). • Trailer towing. • Taxi, police, or delivery service (commercial service). • Off-road or desert operation.
MAINTENANCE SCHEDULES 443 M Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Change the engine oil and engine oil filter if using your vehicle under any of these severe duty conditions: Short trips, stop and go driving, dusty or offroad conditions, police, taxi, fleet, or frequent trailer towing.
M 444 MAINTENANCE SCHEDULES A I N T E N Maintenance Items A N Replace the air conditioning filter (if equipped). C Inspect the rear axle fluid. E S C H E D U L E S 8 Inspect the CV joints. Perform the first inspection at 12,000 mi (20 000 km) or 12 months. Inspect the exhaust system. Perform the first inspection at 12,000 mi (20 000 km) or 12 months. Inspect the front suspension, tie rod ends and boot seals, and replace if necessary. Replace the engine air cleaner filter.
MAINTENANCE SCHEDULES 445 M Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Inspect and replace PCV valve if necessary. Flush and replace the engine coolant. Replace the spark plugs. Change the automatic transmission fluid and filter. WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . 449 ▫ In Mexico Contact . . . . . . . . . . . . . . . . . . . . . 451 ▫ Prepare For The Appointment . . . . . . . . . . . . 449 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . . 451 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 449 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . .
448 IF YOU NEED CONSUMER ASSISTANCE 䡵 Publication Order Forms . . . . . . . . . . . . . . . . . . 454 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . 456 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 455 ▫ Temperature Grades . . . . . . . . . . . . . . . . . . . 456 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. Keep a maintenance log of your vehicle’s service history. This can often provide a clue to the current problem.
450 IF YOU NEED CONSUMER ASSISTANCE IF YOU NEED ASSISTANCE The manufacturer and its authorized dealers are vitally interested in your satisfaction. We want you to be happy with our products and services. Warranty service must be done by an authorized dealer. We strongly recommend that you take your vehicle to your authorized selling dealer. They know you and your vehicle best, and are most concerned that you get prompt and high quality service.
IF YOU NEED CONSUMER ASSISTANCE DaimlerChrysler Canada Inc. Customer Center P.O. Box 1621 Windsor, Ontario N9A 4H6 Phone: (800) 465–2001 In Mexico contact: Av. Prolongacion Paseo de la Reforma, 1240 Sante Fe C.P. 05109 Mexico, D. F.
452 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service contract that is not the manufacturer’s Service Contract. It is not responsible for any service contract other than the manufacturer’s Service Contract. If you purchased a service contract that is not a manufacturer’s Service Contract, and you require service after your manufacturer’s New Vehicle Limited Warranty expires, please refer to your contract documents, and contact the person listed in those documents.
IF YOU NEED CONSUMER ASSISTANCE MOPAR姞 PARTS MOPAR威 fluids, lubricants, parts, and accessories are available from your authorized dealer. They will help you keep your vehicle operating at its best. REPORTING SAFETY DEFECTS In the 50 United States and Washington, D.C. If you believe that your vehicle has a defect which could cause a crash or cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying the manufacturer.
454 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below. Visa, Mastercard, American Express, and Discover orders are accepted. If you prefer mailing your payment, please call for an order form. NOTE: A street address is required when ordering manuals (no P.O. Boxes).
IF YOU NEED CONSUMER ASSISTANCE Call toll free at: • 1–800–890–4038 (U.S.) • 1–800–387–1143 (Canada) Or Visit us on the Worldwide Web at: • www.techauthority.daimlerchrysler.com • www.daimlerchrysler.ca/manuals DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle.
456 IF YOU NEED CONSUMER ASSISTANCE Traction Grades The traction grades, from highest to lowest, are AA, A, B, and C. These grades represent the tire’s ability to stop on wet pavement, as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
INDEX 10
458 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . 315,317 ABS (Anti-Lock Brake System) . . . . . . . . . . . . 317,321 Adaptive Cruise Control (ACC) (Cruise Control) . . 153 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 406 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 Adding Washer Fluid . . . . . . . . . . . . . . . 144,146,402 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 359 Adjustable Pedals . . . . . . . . . . . . . . . . . . . .
INDEX Auto Unlock, Doors . . . . . . . . . . . . . . . . . . . . . . . 30 Auto Up Power Windows . . . . . . . . . . . . . . . . . . 34 Automatic Dimming Mirror . . . . . . . . . . . . . . . . . 84 Automatic Door Locks . . . . . . . . . . . . . . . . . . . 29,30 Automatic Headlights . . . . . . . . . . . . . . . . . . . . 133 Automatic Temperature Control (ATC) . . . . . . . . . 284 Automatic Transaxle Special Additives . . . . . . . . . . . . . . . . . . . . . . 414 Automatic Transmission . . . . . . . . .
460 INDEX Anti-Lock (ABS) . . . . . . . . . . . . . . . . . . . . 317,321 Fluid Check . . . . . . . . . . . . . . . . . . . . . . . 411,437 Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410 Master Cylinder . . . . . . . . . . . . . . . . . . . . . . . 411 Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315 Warning Light . . . . . . . . . . . . . . . . . . . . . 201,317 Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Climate Control . . . . . . . . . . . . . . . . . . . . . . . . . 283 Clock . . . . . . . . . . . . . . . . . . . . . 231,234,237,253,258 Coin Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Cold Weather Operation . . . . . . . . . . . . . . . . . . . 299 Compact Disc (CD) Maintenance . . . . . . . . . . . . . 283 Compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 Compass Calibration . . . . . . . . . . . . . . . . . . . . . 220 Compass Variance . . . . . . . . .
462 INDEX Dealer Service . . . . . . . . . . . . . . . . . . . . . . . . . . 390 Deck Lid, Emergency Release . . . . . . . . . . . . . . . . 38 Deck Lid, Power Release . . . . . . . . . . . . . . . . . . . 37 Defroster, Rear Window . . . . . . . . . . . . . . . . . . . 292 Defroster, Windshield . . . . . . . . . . . . . . . . . . . 77,288 Delay (Intermittent) Wipers . . . . . . . . . . . . . . . . . 141 Diagnostic System, Onboard . . . . . . . . . . . . . . . . 387 Digital Video Disc (DVD) Player . . . .
INDEX Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . 377 Overheating . . . . . . . . . . . . . . . . . . . . . . . . . . 371 Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381 Emergency Trunk Release . . . . . . . . . . . . . . . . . . . 38 Emission Control System Maintenance . . . . . . 388,440 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . 394 Block Heater . . . . . . . . . . . . .
464 INDEX Filters Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . 394 Air Conditioning . . . . . . . . . . . . . . . . . . . . 290,400 Engine Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 395 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . 393,436 Engine Oil Disposal . . . . . . . . . . . . . . . . . . . . 393 Flashers Hazard Warning . . . . . . . . . . . . . . . . . . . . . . . 370 Turn Signal . . . . . . . . . . . . . . . . . . . . . . 77,138,199 Flash-To-Pass . . .
INDEX Materials Added . . . . . . . . . . . . . . . . . . . . . . . 359 Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358 Octane Rating . . . . . . . . . . . . . . . . . . . . . . 357,436 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 357 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 436 Tank Capacity . . . . . . . . . . . . . . . . . . . . . . . . 435 Fuel System Caution . . . . . . . . . . . . . . . . . . . . . 362 Fueling . . . . . . . . . . . . . .
466 INDEX Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . 428 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418 Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 High Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 High Beam/Low Beam Select Switch . . . . . . . . 138 Lights On Reminder . . . . . . . . . . . . . . . . . . . . 136 On With Wipers . . . . . . . . . . . . . . . . . . . . 134,142 Passing . . . . . . . . . . . . . . . . . . . . .
INDEX Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . . 377 Key, Programming . . . . . Key, Replacement . . . . . Key, Sentry (Immobilizer) Key-In Reminder . . . . . . Keyless Entry System . . . Keys . . . . . . . . . . . . . . Knee Bolster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
468 INDEX Headlight Switch . . . . . . . . . . . . . . . . . . . . . . 132 Headlights . . . . . . . . . . . . . . . . . . . . . . . . 132,428 Headlights On Reminder . . . . . . . . . . . . . . . . . 136 Headlights On With Wipers . . . . . . . . . . . . 134,142 High Beam . . . . . . . . . . . . . . . . . . . . . . . . 138,205 High Beam Indicator . . . . . . . . . . . . . . . . . . . . 205 Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . . 20 Instrument Cluster . . . . . . . . . . . . . . . . .
INDEX Power Door . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Low Tire Pressure System . . . . . . . . . . . . . . . . . . 347 Lower Anchors and Tether for CHildren (LATCH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68,69 Lubrication, Body . . . . . . . . . . . . . . . . . . . . . . . 401 Lumbar Support . . . . . . . . . . . . . . . . . . . . . . . . 122 Maintenance Free Battery . . . . . . . . . . . . . . . . . . 397 Maintenance, General . . . . . . . . . . . . . . . . . . . . .
470 INDEX New Vehicle Break-In Period . . . . . . . . . . . . . . . . 73 Occupant Restraints . . . . . . . . . . . . . . . . . . . . . . . 39 Octane Rating, Gasoline (Fuel) . . . . . . . . . . . . 357,436 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 Oil, Engine . . . . . . . . . . . . . . . . . . . . . . . . . 391,436 Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435 Change Interval . . .
INDEX Placard, Tire and Loading Information . . . . . . . . . 332 Port Universal Serial Bus (USB) . . . . . . . . . . . . . 232,251 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232,251 Power Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317 Deck Lid Release . . . . . . . . . . . . . . . . . . . . . . . 37 Distribution Center (Fuses) . . . . . . . . . . . . . . . 419 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Mirrors . . . . . . . . . . . . . .
472 INDEX Rear Window Defroster . . . . . . . . . . . . . . . . . . . 292 Rear Window Features . . . . . . . . . . . . . . . . . . . . 292 Reception, Radio . . . . . . . . . . . . . . . . . . . . . . . . 231 Reclining Front Seats . . . . . . . . . . . . . . . . . . . . . 121 Recorder, Event Data . . . . . . . . . . . . . . . . . . . . . . 62 Recreational Towing . . . . . . . . . . . . . . . . . . . . . . 367 Reformulated Gasoline . . . . . . . . . . . . . . . . . . . . 358 Refrigerant . . . . . . . . . .
INDEX Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . . . 46 Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . 39,40,76 Adjustable Upper Shoulder Anchorage . . . . . . . . 44 And Pregnant Women . . . . . . . . . . . . . . . . . . . 48 Child Restraint . . . . . . . . . . . . . . . . . . . 64,65,66,71 Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Front Seat . . . . . . . . . . . . . . . . . . . . . . . . . . 40,41 Inspection . . . . . . . . . . . . . . . . .
474 INDEX Settings, Personal . . . . . . . . . . . . . . . . . . . . . . . . 226 Shifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301 Automatic Transmission . . . . . . . . . . . . . . . 301,305 Shoulder Belt Upper Anchorage . . . . . . . . . . . . . . 44 Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Side Airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . 50,57 Side Curtain (Window Airbag) . . . . . . . . . . . . . . .
INDEX Storing Your Vehicle . . . . . . . . . . . . . . . . . . . . . . 427 Stuck, Freeing . . . . . . . . . . . . . . . . . . . . . . . . . . 380 Sun Roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 Sunglasses Storage . . . . . . . . . . . . . . . . . . . . . . . 177 Sunroof Maintenance . . . . . . . . . . . . . . . . . . . . . 186 Supplemental Restraint System - Airbag . . . . . . . . 49 System, Navigation . . . . . . . . . . . . . . . . . . . . . . 251 System, Remote Starting . . . .
476 INDEX Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 328,336 Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . 344 Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 Tread Wear Indicators . . . . . . . . . . . . . . . . . . . 340 To Open Hood . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Towing . . . . .
INDEX Universal Serial Bus (USB) Port . . . . . . . . . . . 232,251 Universal Transmitter . . . . . . . . . . . . . . . . . . . . . 177 Unleaded Gasoline . . . . . . . . . . . . . . . . . . . . . . . 357 Untwisting Procedure, Seat Belt . . . . . . . . . . . . . . 45 USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . 232,251 Vacuum/Vapor Harnesses . . . . . . . . . . . . . . . . . 409 Vanity Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Variance, Compass . . . . . . . . . . .
478 INDEX Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Windshield Defroster . . . . . . . . . . . . . . . . . . . 77,288 Windshield Washers . . . . . . . . . . . . . . . . 140,142,402 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402 Windshield Wiper Blades . . . . . . . . . . . . . . . . . . 402 Windshield Wipers . . . . . Wiper Blade Replacement Wiper, Delay . . . . . . . . . Wipers, Intermittent . . . . Wipers, Rain Sensitive . . . . . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
2008 300 SRT8 2008 OWNER’ S MANUAL 81-026-0848 First Edition Printed in U.S.A.
