2008 300 2008 OWNER’ S MANUAL 81-026-0843 First Edition Printed in U.S.A.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number . . . . . . . . . . . . . . . 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Modifications / Alterations . . . . . . . . . . . 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION This manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a Warranty Information Booklet and various customer oriented documents. You are urged to read these publications carefully. Following the instructions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures, which could result in an accident or bodily injury. It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions. VEHICLE IDENTIFICATION NUMBER The vehicle identification number (VIN) is on the left front corner of the instrument panel.
INTRODUCTION 7 VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . .12 ▫ General Information . . . . . . . . . . . . . . . . . . . .18 ▫ Wireless Ignition Node (WIN) . . . . . . . . . . . . .12 䡵 Security Alarm System — If Equipped . . . . . . . . .18 ▫ FOB With Integrated Key . . . . . . . . . . . . . . . . .12 ▫ Rearming Of The System . . . . . . . . . . . . . . . . .18 ▫ Tip Start Feature . . . . . . . . . . . . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ To Unlatch The Trunk . . . . . . . . . . . . . . . . . . .24 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . .39 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . .25 䡵 Trunk Lock And Release . . . . . . . . . . . . . . . . . . .40 ▫ Programming Additional Transmitters . . . . . . . .25 䡵 Trunk Safety Warning . . . . . . . . . . . . . . . . . . . . .41 ▫ Transmitter Battery Service . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Driver And Front Passenger Supplemental Restraint System (SRS) - Airbag . . . . . . . . . . . .52 ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . .65 ▫ Child Restraint . . . . . . . . . . . . . . . . . . . . . . . .67 䡵 Engine Break-In Recommendations . . . . . . . . . . .76 䡵 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 ▫ Transporting Passengers . . . . . . . . . . . . . . . . .77 ▫ Lock Your Vehicle . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Fob with Integrated Key and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the double-sided integrated key into the ignition switch with either side up. Wireless Ignition Node (WIN) The Wireless Ignition Node (WIN) operates similar to an ignition switch. It has four operating positions, three of which are detented and one spring-loaded.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 The valet key allows for entry into the vehicle should the battery in the vehicle or the Fob go dead. The valet key is also for locking the glove box. You can keep the valet key with you when valet parking. 2 To remove the valet key from the Fob, slide the mechanical latch at the top of the Fob sideways with your thumb and then pull the key out of the Fob with your other hand.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Tip Start Feature Do not press the accelerator. Use the Fob with Integrated Key to briefly turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. Ignition Key Removal Place the selector lever in “P” (Park). Turn the key to the LOCK position and then remove the key.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 CAUTION! An unlocked car is an invitation to thieves. Always remove key from the ignition and lock all doors when leaving the vehicle unattended. Key-In-Ignition Reminder If you open the driver’s door and the key is in the ignition, a chime will sound to remind you to remove the key. NOTE: The Key-In-Ignition reminder only sounds when the ignition key is placed in the LOCK or ACC position.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE flash after the bulb check, it indicates that someone used an invalid Fob to start the engine. Either of these conditions will result in the engine being shut off after two (2) seconds. If the Vehicle Security Alarm Indicator Light turns on during normal vehicle operation (vehicle running for longer than 10 seconds), it indicates that there is a fault in the electronics. Should this occur, have the vehicle serviced as soon as possible.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 location. This number is required for dealer replacement of Fobs. Duplication of Fobs may be performed at an authorized dealer or by using the Customer Key Programming procedure. This procedure consists of programming a blank Fob to the vehicle electronics. A blank Fob is one, which has never been programmed. NOTE: When having the Sentry Key Immobilizer System serviced, bring all vehicle Fobs with you to the dealer.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If a programmed key is lost, see your dealer to have all remaining keys erased from the systems memory. This will prevent the lost key from starting your vehicle. The remaining keys must then be reprogrammed. All vehicle keys must be taken to the dealer at the time of service to be reprogrammed. General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 To Arm the System: Remove the key from the ignition switch and either press a power door lock switch while the driver or passenger door is open or press the LOCK button on the Remote Keyless Entry (RKE) transmitter. After the last door is closed, or if all doors are closed, the system will arm itself in about 16 seconds. During that time, the Vehicle Security Alarm Indicator light will flash. If it does not illuminate, the system is not arming.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the alarm system is armed and the battery becomes disconnected the system will remain armed when the battery is reconnected. The exterior lights will flash, the horn will sound, and the ignition will not start the vehicle. If this occurs, disarm the system. Tamper Alert If something has triggered the system in your absence, the horn will sound three times when you disarm the system. Check the vehicle for tampering.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 continue to work. Driving at speeds 5 mph (8 km/h) and above disables all transmitter buttons for all Fobs. To unlock the doors: Press and release the UNLOCK button on the transmitter once to unlock the driver’s door, or twice within 5 seconds to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the following procedure: 1. Press and hold the LOCK button on a programmed transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the UNLOCK button while still holding the LOCK button. 2. Release both buttons at the same time. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 1. Press and hold the UNLOCK button on a programmed transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the LOCK button while still holding the UNLOCK button. 2. Release both buttons at the same time. 3. Test the feature while outside of the vehicle, by pressing the LOCK/UNLOCK buttons on the transmitter with the ignition switch in the LOCK position, and the key removed. 4.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sound Horn with Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the transmitter. This feature can be turned on or turned off.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Using The Panic Alarm: To turn the panic alarm feature ON or OFF, press and hold the PANIC button on the transmitter for at least one second and release. When the panic alarm is on, the headlights and park lights will flash, the horn will pulse on and off, and the interior lights will turn on.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Do not touch the battery terminals that are on the back housing or the printed circuit board. 1. Battery access is through a door located on the rear of the Fob. Insert a small, flat blade screwdriver into the slot and gently pry open the access door. 2. Remove and replace the batteries. Avoid touching the new batteries with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 If your Remote Keyless Entry (RKE) transmitter fails to operate from a normal distance, check for these two conditions. How To Use Remote Start All of the following conditions must be met before the engine will remote start: 1. A weak battery in the transmitter. The expected life of the battery is a minimum of three years. • Gear selector lever in “P” (Park). 2.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter Remote Start Mode Press and release the Remote Start button on the RKE transmitter twice within 5 seconds. The parking lights will flash and horn will honk twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15-minute cycle. NOTE: • The park lamps will turn on and remain on during Remote Start mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 NOTE: To avoid inadvertent shut downs, the system will disable the one-time press of the remote start button for two seconds after receiving a valid remote start request. 2 DOOR LOCKS Manual Door Locks To lock each door, push the door lock plunger on each door trim panel downward. To unlock each door, pull the door lock plunger on each door trim panel upward. Door Lock Plunger If the door lock plunger is down when you shut the door, the door will lock.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. Power Door Locks A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors. • When leaving the vehicle, always remove the key from the ignition, and lock your vehicle. Unsupervised use of vehicle equipment may cause severe personal injuries and death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 locks will not operate. This prevents you from accidentally locking the key in the vehicle. Removing the key or closing the door will allow the locks to operate. If a door is open, the key is in the ignition, and the ignition is in the LOCK or ACC position, a chime will sound as a reminder to remove the key. Automatic Door Locks The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Cycle the ignition switch between LOCK and ON and then back to LOCK 4 times ending up in the LOCK position. 3. Depress the power door lock switch to lock the doors. 4. A single chime will indicate the completion of the programming. 5. Repeat these steps if you want to return this feature to its previous setting. NOTE: Use the Automatic Door Locks feature in accordance with local laws.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON and then back to LOCK 4 times ending up in the LOCK position. 3. Depress the power door unlock switch to unlock the doors. 4. A single chime will indicate the completion of the programming. 5. Repeat these steps if you want to return this feature to its previous setting. NOTE: Use the Automatic Unlock Doors On Exit feature in accordance with local laws.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Insert the tip of the valet key or alike into the child lock control and pull it upward. NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position. WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. Child Lock Control 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • For emergency exit with the system engaged, move the door lock switch to the UNLOCK position, roll down the window and open the door with the outside door handle. 2 To Disengage the Child Protection Door Lock 1. Open the rear door. 2. Insert the tip of the valet key or alike into the child lock control and pull it downward. Child Lock Control 3. Repeat Steps 1 and 2 on the opposite rear door.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS Power Windows The window controls on the driver’s door control all the door windows. There are single window controls on each passenger door trim panel, which operate the passenger door windows. The window controls will operate only when the ignition switch is in the ON or ACC position. WARNING! Never leave children in a vehicle, with the keys in the ignition switch.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 down feature. Press the window switch to the second detent, release, and the window will go down automatically. To open the window part way, press the window switch to the first detent and release it when you want the window to stop. To stop the window from going all the way down during the auto-down operation, pull up on the switch briefly.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE will remain active for 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. For vehicles equipped with the EVIC, the power window switches will remain active for up to 60 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time is programmable.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 1. Pull the window switch up to close window completely and continue to hold the switch up for an additional two seconds after the window is closed. 2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE TRUNK LOCK AND RELEASE The trunk lid can be released from inside the vehicle by pressing the Trunk Release Button located on the instrument panel to the left of the steering wheel. NOTE: The transmission must be in “P” (Park) before the switch will operate. The trunk lid can be released from outside the vehicle by pressing the trunk button on the Remote Keyless Entry (RKE) transmitter twice within 5 seconds.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 TRUNK SAFETY WARNING Trunk Emergency Release WARNING! 2 Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended. Once in the trunk, young children may not be able to escape, even if they entered through the rear seat. If trapped in the trunk, children can die from suffocation or heat stroke.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE OCCUPANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems. These include the front and rear seat belts for the driver and all passengers, the front airbags for both the driver and front passenger, the optional supplemental side curtain airbags for the driver and passengers seated next to a window, and the optional supplemental front-seat-mounted side airbags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seating positions in your vehicle are equipped with Lap/Shoulder Belts. The belt webbing retractor is designed to lock during very sudden stops or impacts. This feature allows the shoulder part of the belt to move freely with you under normal conditions.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the front seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap. Pulling Out Lap/Shoulder Belt 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well. In a sudden stop, you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Seat belt assemblies must be replaced after a collision if they have been damaged (bent retractor, torn webbing, etc.).
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In the rear seat, move toward the center of the seat to position the belt away from your neck. 1. Position the latch plate as close as possible to the anchor point. Seat Belt Pretensioners The seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove any slack from the seat belts in the event of a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Enhanced Seat Belt Reminder System (BeltAlert姞) If the driver’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced Warning System (BeltAlert威) will alert the driver to buckle their seat belt. The driver should also instruct all other occupants to buckle their seat belts.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Watch for the Seat Belt Reminder Light to turn on while unbuckling the seat belt and turn off while re-buckling the seat belt. It may be necessary to retract the seat belt. 4. Turn the ignition switch to the LOCK position. A single chime will sound to signify that you have successfully completed the programming. The Enhanced Warning System (BeltAlert威) can be reactivated by repeating this procedure.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 How To Disengage The Automatic Locking Mode Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive (emergency) locking mode. Seat Belts and Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Driver and Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s airbag is mounted in the center of the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the glove compartment. The words SRS AIRBAG are embossed on the airbag covers.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 The front airbags have a multistage inflator design. This may allow the airbag to have different rates of inflation that are based on collision severity. WARNING! • Do not put anything on or around the front airbag covers or attempt to manually open them. You may damage the airbags and you could be injured because the airbags are no longer functional. These protective covers for the airbag cushions are designed to open only when the airbags are inflating.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Window Airbag NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deployment. If the vehicle is equipped with supplemental front-seatmounted side airbags, they are marked with an SRS label sewn into the outboard side of the seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 WARNING! • If your vehicle is equipped with supplemental front-seatmounted side airbags, do not use accessory seat covers or place objects between you and the seat airbags; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury. • If your vehicle is equipped with supplemental front-seatmounted side airbags, do not attach cup holders or any other objects on or around the door.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some simple steps you can take to minimize the risk of harm from a deploying airbag. 1. Children 12 years old and under should ride buckled up in the rear seat. 2. Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger front airbag. An airbag deployment could cause severe injury or death to infants in that position. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 10. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided in the ⬙If You Need Customer Assistance⬙ section in this manual. WARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly. In some collisions, the airbags won’t deploy at all.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag System Components The airbag system consists of the following: • Occupant Restraint Controller (ORC) • Side Remote Acceleration Sensors (if equipped) • Airbag Warning Light • Driver Airbag • Front Passenger Airbag • Supplemental Side Curtain Airbags above Side Windows (if equipped) • Supplemental Front-Seat-Mounted Side Airbags (if equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting Wiring • Seat Belt Reminder Light • Knee Impac
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 • For vehicles so equipped, The ORC also determines if a side impact is severe enough to deploy the supplemental side curtain airbag and/or supplemental frontseat-mounted side airbag as required for each type of impact. • The ORC also monitors the readiness of the electronic parts of the system whenever the ignition switch is in the START or ON positions.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE airbag inflation rates may be possible based on collision severity. The steering wheel hub trim cover, and the upper passenger side of the instrument panel separate and fold out of the way, as the bags inflate to their full size. The bags fully inflate in about 50 - 70 milliseconds. This is about half of the time that it takes to blink your eyes. The bags then quickly deflate while helping to restrain the driver and front passenger.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 vehicle. A quantity of nontoxic gas is generated to inflate the front-seat-mounted side airbag. The inflating front-seat-mounted side airbag pushes through the seam in the seat’s trim cover and opens into the space between the occupant and the door. The airbag inflates at a very high speed and with enough force to injure you if you are not belted and seated properly, or if items are positioned in the area where the front-seatmounted side airbag inflates.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Unapproved modifications or service procedures to the front seat assembly, its related components, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the driver or front seat passenger if the vehicle is involved in an accident. A modified vehicle may not comply with required Federal Motor Vehicle Safety Standards (FMVSS).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation continues, see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s instructions for cleaning.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. You could be injured because the airbags are not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper passenger side of the instrument panel. Do not modify the front bumper, vehicle body structure, or frame.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Event Data Recorder (EDR) In the event of an accident, your vehicle is designed to record up to 5 seconds of specific vehicle data parameters (see the following list) in an event data recorder prior to the moment of airbag deployment, or near deployment, and up to a quarter second of high-speed deceleration data during and/or after airbag deployment. EDR data are ONLY recorded if an airbag deploys, or nearly deploys, and are otherwise unavailable.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE may be released for incorporation in aggregate crash databases, such as those maintained by the US government and various states. Data of a potentially sensitive nature, such as would identify a particular driver, vehicle, or crash, will be treated confidentially. Confidential data will not be disclosed by DaimlerChrysler Corporation to any third party except when: 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 • Cruise control status • Traction/stability control status • Tire pressure monitoring system status (if equipped) Child Restraint Everyone in your vehicle needs to be buckled up all the time — babies and children, too. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE There are different sizes and types of restraints for children from newborn size to the child almost large enough for an adult safety belt. Always check the child seat Owner’s Manual to ensure you have the correct seat for your child. Use the restraint that is correct for your child: Infants and Child Restraints • Safety experts recommend that children ride rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 than one year. These child seats are also held in the vehicle by the lap/shoulder belt or the LATCH child restraint anchorage system. Refer to “LATCH — Child Seat Anchorage System (Lower Anchors and Tether for CHildren)” in this section.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. • A rearward facing child restraint should only be used in a rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 LATCH — Child Seat Anchorage System (Lower Anchors and Tether for CHildren) Your vehicle’s rear seat is equipped with the child restraint anchorage system called LATCH. The LATCH system provides for the installation of the child restraint without using the vehicle’s seat belts, instead securing the child restraint using lower anchorages and upper tether straps from the child restraint to the vehicle structure.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Again, carefully follow the installation instructions that were provided with the child restraint system. The rear seat lower anchorages are round bars, located at the rear of the seat cushion where it meets the seat back, and are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 means of adjusting the tension in the strap. Forwardfacing toddler restraints and some rear-facing infant restraints will also be equipped with a tether strap, a hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap. You will first loosen the adjusters on the lower straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchorages.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle-end belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Ensure that the tether strap does not slip into the opening between the seat backs as you remove slack in the strap. WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Transporting Pets Airbags deploying in the front seat could harm your pet.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered as a normal part of the break-in and not interpreted as an indication of difficulty. SAFETY TIPS Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area. inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as required. If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Safety Checks You Should Make Inside The Vehicle Seat Belts Inspect the belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (bent retractor, torn webbing, etc.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 3 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 ▫ Tilt In Reverse Feature — If Equipped . . . . . . .89 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . .86 ▫ Power Remote Control Mirrors . . . . . . . . . . . . .89 ▫ Automatic Dimming Inside Mirror — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .86 ▫ Heated Remote Control Mirrors — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .
82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Advanced Phone Connectivity . . . . . . . . . . . . 107 ▫ Things You Should Know About Your UConnect™ System . . . . . . . . . . . . . . . . . . . . 109 ▫ General Information . . . . . . . . . . . . . . . . . . . 117 䡵 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 ▫ Power Seats . . . . . . . . . . . . . . . . . . . . . . . . . 117 ▫ Power Reclining Seats . . . . . . . . . . . . . . . . . . 118 ▫ Lumbar Support . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 ▫ Lights-On Reminder . . . . . . . . . . . . . . . . . . . 134 䡵 Headlight Washers — If Equipped . . . . . . . . . . . 142 ▫ Fog Lights — If Equipped . . . . . . . . . . . . . . . 134 ▫ Adding Washer Fluid . . . . . . . . . . . . . . . . . . 143 ▫ Multi-Function Lever . . . . . . . . . . . . . . . . . . . 134 䡵 Tilt/Telescoping Steering Column . . . . . . . . . . . 144 ▫ Overhead Console Map/Reading Lights . . . . .
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ To Accelerate For Passing . . . . . . . . . . . . . . . 151 ▫ Display Warnings & Maintenance . . . . . . . . . . 165 䡵 Adaptive Cruise Control (ACC) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 ▫ Precautions While Driving With ACC . . . . . . . 168 ▫ Adaptive Cruise Control (ACC) Operation . . . 154 ▫ Activating Adaptive Cruise Control (ACC) . . . 154 ▫ To Activate . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 ▫ Troubleshooting Tips . . . . . . . . . . . . . . . . . . . 183 ▫ Ignition Off Operation . . . . . . . . . . . . . . . . . . 186 ▫ General Information . . . . . . . . . . . . . . . . . . . 183 ▫ Sunroof Fully Closed . . . . . . . . . . . . . . . . . . . 187 䡵 Power Sunroof — If Equipped . . . . . . . . . . . . . 184 䡵 Electrical Power Outlets . . . . . . . . . . . . . . . . . . 187 ▫ Opening Sunroof - Express . . . . . . . . . . . . . .
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view through the rear window. A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjusting Rearview Mirror Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle). The mirror should be adjusted while set in the day position (toward windshield).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 Outside Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirror. NOTE: The passenger side convex outside mirror will give a much wider view to the rear, and especially of the lane next to your vehicle.
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Exterior Mirrors Folding Feature — If Equipped Some models have exterior mirrors that are hinged. The hinge allows the mirror to pivot forward and rearward to resist damage. The hinge has three detent positions, full forward, full rearward, and normal. Outside Mirror Auto Dimmer — If Equipped This mirror automatically adjusts for annoying headlight glare from vehicles behind you.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 Tilt in Reverse Feature — If Equipped The ⬙Tilt in Reverse⬙ feature tilts the outside rearview mirrors downward when the ignition switch is to the ON position and the transmission is in the “R” (Reverse) position. This feature provides the driver with a better view of the ground and vehicle in the area of the rear tires when backing up. The mirrors will move back to their previous position when the transmission is shifted out of “R” (Reverse).
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Remote Control Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the Rear Window Defrost. Illuminated Vanity Mirrors — If Equipped An illuminated vanity mirror is on the sun visor. To use the mirror, rotate the sun visor downward and swing the mirror cover upward. The light turns on automatically. Closing the mirror cover turns off the lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 UConnect™ is a voice-activated, hands-free, in- vehicle communications system. UConnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙Call” ѧ “Mike” ѧ”Work⬙ or ⬙Dial” ѧ “248-555-1212⬙). Your cellular phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the UConnect™ system.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE UConnect™ allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle, and enables you to mute the system’s microphone for private conversation. The UConnect™ phone book enables you to store up to 32 names and four numbers per name. Each language has a separate 32-name phone book accessible only in that language. This system is driven through your Bluetooth™ Hands-Free profile cellular phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Profile) you may not be able to use any UConnect™ features. Refer to your cellular service provider or the phone manufacturer for details. • Prior to giving a voice command, one must wait for the beep, which follows the ⬙Ready⬙ prompt or another prompt. The UConnect™ system is fully integrated with the vehicle’s audio system.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Command Tree Refer to “Voice Tree” at the end of this section. Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say ⬙Help⬙ following the beep. The UConnect™ system will play all the options at any prompt if you ask for help. To activate the UConnect™ system from idle, simply press the “Phone” button and follow audible prompts for directions.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 You can enter any four-digit pin number. You will not need to remember this pin number after the initial pairing process. • For identification purposes, you will be prompted to give the UConnect™ system a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name. • You will then be asked to give your cellular phone a priority level between 1 and 7, 1 being the highest priority.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The UConnect™ system will confirm the phone number and then dial. The number will appear in the display of certain radios. • The UConnect™ system will confirm the name and then dial the corresponding phone number, which may appear in the display of certain radios. Call by Saying a Name Add Names to Your UConnect™ Phonebook • Press the “Phone” button to begin. NOTE: Adding names to phone book is recommended when vehicle is not in motion.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 • When prompted, enter the number designation (e.g., ⬙Home,⬙ ⬙Work,⬙ ⬙Mobile,⬙ or ⬙Pager⬙). This will allow you to store multiple numbers for each phone book entry, if desired. • When prompted, recite the phone number for the phone book entry that you are adding. After you are finished adding an entry into the phone book, you will be given the opportunity to add more phone numbers to the current entry or to return to the main menu.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the UConnect™ and then send the address book entry via Bluetooth. Please see your phone owners’ manual for specific instructions on how to drop the Bluetooth connection. • If the phonebook entry is longer than 24 characters it will be use only the first 24 characters. Edit Entries in the UConnect™ Phonebook NOTE: Editing names in the phone book is recommended when vehicle is not in motion. • Press the “Phone” button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 • After the ⬙Ready⬙ prompt and the following beep, say ⬙Phonebook Delete.⬙ • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. You can either say the name of a phone book entry that you wish to delete or you can say ⬙List Names⬙ to hear a list of the entries in the phone book from which you choose.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The UConnect™ system will play the names of all the phone book entries. • To call one of the names in the list, press the ⬙Voice Recognition’ button during the playing of the desired name, and say ⬙Call.⬙ NOTE: The user can also exercise ⬙Edit⬙ or ⬙Delete⬙ operations at this point. • The UConnect™ system will then prompt you as to the number designation you wish to call. • The selected number will be dialed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 NOTE: The UConnect™ system compatible phones in market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can only either answer an incoming call or ignore it. Making a Second Call while Current Call in Progress To make a second call while you are currently in a call, press the ’Voice Recognition’ button and say ⬙Dial⬙ or ⬙Call⬙ followed by the phone number or phone book entry you wish to call.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE established, press and hold the “Phone” button until you hear a double beep indicating that the two calls have been joined into one conference call. Call Termination To end a call in progress, momentarily press the “Phone” button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the far end, a call on hold may not become active automatically.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 which the call is automatically transferred from the UConnect™ system to the mobile phone. • An active call is automatically transferred to the mobile phone after ignition key is switched to off. UConnect™ System Features Language Selection To change the language that the UConnect™ system is using, • Press the “Phone” button to begin.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The emergency number dialed is based on the Country where the vehicle is purchased (911 for USA and Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area. The UConnect™ system does slightly lower your chances of successfully making a phone call as to that for the cell phone directly.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 Working with Automated Systems This method is designed to be used in instances where one generally has to press numbers on the cellular phone keypad while navigating through an automated telephone system. You can use your UConnect™ system to access a voicemail system or an automated service, such as, paging service or automated customer service.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Barge In - Overriding Prompts The “Voice Recognition” button can be used when you wish to skip part of a prompt and issue your voice recognition command immediately. For example, if a prompt is playing ⬙Would you like to pair a phone, clear aѧ,⬙ you could press the “Voice Recognition” button and say ⬙Pair a Phone⬙ to select that option without having to listen to the rest of the voice prompt.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 NOTE: Certain brands of mobile phones do not send the dial ring to the UConnect™ system to play it on the vehicle audio system, so you will not hear it. Under this situation, after successfully dialing a number, the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE List Paired Cellular Phone Names • Press the “Phone” button to begin. • Press the “Phone” button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Setup Select Phone⬙ and follow the prompts. • After the “Ready” prompt and the following beep, say “Setup Phone Pairing.” • When prompted, say ⬙List Phones.⬙ • The UConnect™ system will play the phone names of all paired cellular phones in order from the highest to the lowest priority.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 • At the next prompt, say ⬙Delete⬙ and follow the prompts. From outside the UConnect™ mode (e.g. from radio mode) • You can also press the “Voice Recognition” button anytime while the list is being played, and then choose the phone you wish to delete.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Recognition (VR) • fully closed windows, • For best performance, adjust the rear view mirror to provide at least 1⁄2 inch (1 cm) gap between the overhead console (if equipped) and the mirror. • dry weather condition. • Always wait for the beep before speaking. • Even though the system is designed for users speaking in North American English, French, and Spanish accents, the system may not always work for some.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 • You can say ⬙O⬙ (letter ⬙O⬙) for ⬙0⬙ (zero). ⬙800⬙ must be spoken ⬙eight-zero-zero.⬙ • Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. • Performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the UConnect™ system. • Echo at far end can sometime be reduced by lowering the in-vehicle audio volume.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 3
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Primary Alternate(s) call cancel confirmation prompts.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call UConnect™ Tutorial try again voice training work yes
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. 3 • This device must accept any interference received, including interference that may cause undesired operation. SEATS Power Seats The power seat switch is on the outboard side of the seat near the floor.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. Power Reclining Seats The recliner control is located on the outboard side of the seat. CAUTION! Do not place any article under a power seat as it may cause damage to the seat controls.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked. Lumbar Support This feature allows you to increase or decrease the amount of lumbar support. Turn the control lever forward to increase and rearward to decrease the desired amount of lumbar support.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Adjust the restraint so that the upper edge is as high as practical. To raise it, pull upward on the head restraint. To lower it, depress the button on the post guide and push downward on the head restraint.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 The controls for the driver and front passenger heated seats are located near the bottom center of the instrument panel. 3 Rear Heated Seat Switch Front Heated Seat Switch On vehicles equipped with rear heated seats, the seats closest to the doors are heated. The controls for these seats are located on the rear of the center console. After turning on the ignition, you and your passenger(s) can choose from High, Off, or Low heat settings.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once to select high-level heating. Press the switch a second time to select low-level heating. Press the switch a third time to shut off the heating elements. If high-level heating is selected, the system will automatically switch to low level after 30 minutes of continuous operation. At that time, the number of illuminated LEDs changes from two to one, indicating the change.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Folding Rear Seat When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap. WARNING! • Be certain that the seatback is securely locked into position. If the seatback in not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DRIVER MEMORY SEAT — IF EQUIPPED This feature allows the driver to store up to two different memory profiles, for easy recall through a memory switch. Each memory profile contains desired position settings for the driver seat, side mirror, adjustable pedals (if equipped), and power tilt and telescopic steering column (if equipped), and a set of desired radio station presets. The memory switch is located on the driver’s door panel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 1. Adjust all memory profile settings to desired preferences (i.e. seat, side mirror, adjustable pedals [if equipped], power tilt and telescopic steering column [if equipped], and radio station presets). 2. Press and release the Set (S) button on the memory switch, then press the side of the rocker switch labeled (1) within 5 seconds. The Electronic Vehicle Information Center (EVIC) — if equipped will display which memory position is being set.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To program your transmitters, perform the following: Memory Position Recall 1. Remove key from ignition. NOTE: The vehicle must be in Park to recall memory positions. If a recall is attempted when the vehicle is not in Park, a message will display in the Electronic Vehicle Information Center (EVIC) — if equipped. 2. Select desired memory profile 1 or 2. 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 telescopic steering column (if equipped) stop moving. A delay of one second will occur before another recall can be selected. Easy Entry/Exit Seat (Available with Memory Seat Only) This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. The distance the driver seat moves depends on where you have the driver seat positioned when you remove the key from the ignition switch.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE details, refer to “Automatically Move Seat Back on Exit,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4 of this manual. TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. First, pull the hood release lever located under the left side of the instrument panel. Hood Release Lever Next, move to the outside of the vehicle and push the safety catch to the left.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 To prevent possible damage, do not slam the hood to close it. Lower the hood, until it is open approximately 6 inches (15 cm), and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. WARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. You could have a collision.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch controls the operation of the headlights, parking lights, instrument panel lights, instrument panel light dimming, interior lights, and fog lights. Headlight Switch Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Automatic Headlights – If Equipped This system automatically turns the headlights ON or OFF according to ambient light levels. To turn the system ON, rotate the headlight switch counter-clockwise to the AUTO (A) position. When the system is ON, the Headlight Time Delay feature is also ON. This means the headlights will stay ON for up to 90 seconds after you turn the ignition switch OFF.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights On with Wipers (Available with Auto Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the headlight switch is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 To Deactivate: Perform either of the following steps to deactivate the SmartBeam system. 1. Pull the Multi-Function Lever toward you to switch the headlights from the HIGH BEAM to the LOW BEAM position. 2. Rotate the headlight switch clockwise from the AUTO (A) to the ON position. NOTE: Broken, muddy, or obstructed headlights and taillights of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle).
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Headlight delay time is programmable on vehicles equipped with the Electronic Vehicle Information Center (EVIC). For details, refer to “Delay Turning Headlights Off,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4 of this manual.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Moving the Multi-Function Lever up or down also causes the corresponding turn signal indicator in the outside mirror (if so equipped) to flash. For details, refer to “Outside Mirrors with Turn Signal & Approach Lighting” under “Mirrors” in this section. You can also signal a lane change by moving the lever partially up or down without moving beyond the detent. Releasing the lever at the detent will provide 3 flashes.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Highbeam/Lowbeam Select Switch Push the Multi-Function Lever away from you to switch the headlights to HIGH beam. Pull the Lever towards you to switch the headlights back to LOW beam. Flash to Pass You can signal another vehicle with your headlights by lightly pulling the Multi-Function Lever toward you. This will cause the headlights to turn on at high beam and remain on until the lever is released.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 because a door is open. This includes the glove box light, but not the trunk light. To restore interior light operation, either turn the ignition switch ON or cycle the light switch. Dimmer Control The dimmer control is part of the headlight switch, and is located on the left side of the instrument panel.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS The multi-function lever operates the windshield wipers and washer when the ignition switch is in the ON position. The lever is located on the left side of the steering column. Rotate the end of the multi-function lever to the first detent past the intermittent settings for Low-speed wiper operation, or to the second detent past the intermittent settings for High-speed wiper operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 the wipe interval from a minimum of one cycle every second to a maximum of approximately 30 seconds between cycles. WARNING! Sudden loss of visibility through the windshield could lead to an accident. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with defroster before and during windshield washer use.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Headlights On with Wipers feature can be turned on or off through the Electronic Vehicle Information Center (EVIC) — if equipped. For details, refer to ”Headlights On with Wipers,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center” in Section 4 of this manual. Rain Sensing Wipers — If Equipped This feature senses moisture on the windshield and automatically activates the wipers for the driver.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 The rain sensing system has protective features for the wiper blades and arms.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Washer Fluid Reservoir The fluid reservoir will hold nearly 1 gallon (4 liters) of washer fluid when the message “Low Washer Fluid” appears in the Electronic Vehicle Information Center (EVIC) — if equipped.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 headlight lens. In addition, the windshield washers will spray the windshield and the windshield wipers will cycle. NOTE: The headlight washers will operate on the first spray of the windshield washer and then every fourth spray after that. Headlight Washer Adding Washer Fluid The headlight washer and windshield washer share the same fluid reservoir. The reservoir is located in the front of the engine compartment.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column. Washer Fluid Reservoir WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 To unlock the steering column, pull the control handle outward. To tilt the steering column, move the steering wheel upward or downward as desired. To lengthen or shorten the steering column, pull the steering wheel outward or push it inward as desired. To lock the steering column in position, push the control handle inward until fully engaged. WARNING! Do not adjust the steering wheel while driving. The telescoping adjustment must be locked while driving.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: For vehicles equipped with Driver Memory Seat, you can use your remote keyless entry transmitter or the memory switch on the driver’s door panel to return the tilt/telescopic steering column to preprogrammed positions. Refer to “Driver Memory Seat” in this section for details. WARNING! Power Tilt/Telescoping Steering To tilt the steering column, move the lever up or down as desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 ADJUSTABLE PEDALS — IF EQUIPPED The adjustable pedals system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position. This feature allows both the brake and accelerator pedal to move toward or away from the driver to provide improved position with the steering wheel. The switch is located on the front side of the driver’s seat cushion side shield.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control is ON. One of the following messages will display in the Electronic Vehicle Information Center (EVIC) — if equipped if a pedal adjustment is attempted when the system is locked out: “Adjustable Pedal Disabled — Cruise Control Engaged” or “Adjustable Pedal Disabled — Vehicle In Reverse.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Electronic Speed Control Operation The speed control lever (located on the right side of the steering wheel) operated the system. To Activate: Push and release the (“ON/OFF”) button located on the end of the speed control lever. The indicator light in the instrument cluster will illuminate to show that the speed control system is ON. To turn the system OFF, push and release the (“ON/OFF”) button again. The system and the indicator light will turn off.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Set At A Desired Speed: When the vehicle reaches the speed desired, push the lever down and release (“SET DECEL”). Remove your foot from the accelerator pedal and the vehicle will operate at the selected speed. NOTE: • Speed control will only function in third, fourth, or fifth gear when in the Autostick威 Mode (if equipped). • The speed control may not engage if a different size tire is installed on one wheel, such as the compact spare tire.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Tapping (“RESUME ACCEL”) once will result in a 1 mph (1.6 km/h) speed increase. Each time the lever is tapped, speed increases so that tapping the lever three times will increase speed by 3 mph (4.8 km/h), etc. To decrease speed while speed control is set, push down and hold the lever (“SET DECEL”). Release the lever when the desired speed is reached, and a new set speed will be established. Tapping (“SET DECEL”) once will result in a 1 mph (1.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED Adaptive Cruise Control (ACC) increases the driving convenience provided by cruise control while traveling on highways and major roadways. However, it is not a safety system and not designed to prevent collisions. ACC will allow you to keep cruise control engaged in light to moderate traffic conditions without the constant need to reset your cruise control.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 WARNING! • Adaptive Cruise Control (ACC) is a convenience system. It is not a substitute for active driving involvement. It is always the driver’s responsibility to be attentive of road, traffic, and weather conditions, vehicle speed, distance to the vehicle ahead, and most importantly brake operation to ensure safe operation of the vehicle under all road conditions.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adaptive Cruise Control (ACC) Operation The speed control lever (located on the right side of the steering wheel) operates the ACC system. Activating Adaptive Cruise Control (ACC) You can only activate ACC if the vehicle speed is above 25 mph (40 km/h). When the system is turned on and in the READY state, the Electronic Vehicle Information Center (EVIC) displays “ACC READY.” When the system is OFF, the EVIC displays “ACC OFF.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 To Activate: Push and release the (“ON/OFF”) button located on the end of the speed control lever. The ACC menu in the EVIC displays “ACC READY.” To turn the system OFF, push and release the (“ON/ OFF”) button again. At this time, the system will turn off and the EVIC will display “ACC OFF.” WARNING! Leaving the Adaptive Cruise Control (ACC) system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Set a Desired Speed: When the vehicle reaches the speed desired, push the lever down and release (“SET DECEL”). The EVIC will display the set speed. Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set speed. If this occurs: • The message “DRIVER OVERRIDE” will display in the EVIC. • The system will not be controlling the distance between your vehicle and the vehicle ahead.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 To Cancel: The system will disable ACC without erasing the memory if: • You softly tap the brake pedal. 3 • You depress the brake pedal. • You pull the speed control lever toward you (“CANCEL”). • The Electronic Stability Program / Traction Control System (ESP/TCS) activates. To Turn Off: The system will turn off and erase the set speed in memory if: • You push and release the (“ON/OFF”) button. • You turn off the ignition. • You switch off ESP.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Resume Speed: Push the lever up and release (“RESUME ACCEL”), and then remove your foot from the accelerator pedal. The EVIC will display the last set speed. WARNING! The Resume function should only be used if traffic and road conditions permit. Resuming a set speed that is too high or too low for prevailing traffic and road conditions could cause the vehicle to accelerate or decelerate too sharply for safe operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Tapping the lever down once will result in a 1 mph (Canada 1 km/h) decrease in set speed. Each subsequent tap of the lever results in a decrease of 1 mph (Canada 1 km/h). NOTE: • When you use the lever to decelerate, if the engine’s braking power does not slow the vehicle sufficiently to reach the set speed, the brake system will automatically slow the vehicle.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE You can change the distance setting by pushing the lever away from you and release (“DISTANCE”). Each time this is done, the distance setting toggles between long, medium, and short. The vehicle will then maintain the set distance until: • The vehicle ahead accelerates to a speed above the set speed. If there is no vehicle ahead, the vehicle will maintain the set speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 A Proximity Warning will alert the driver if ACC predicts that its maximum braking level is not sufficient to maintain the set distance. If this occurs, a visual alert (“ATTENTION”) will flash in the EVIC and a chime will sound while ACC continues to apply its maximum braking capacity. When this occurs, you should immediately apply the brakes as needed to maintain a safe distance from the vehicle ahead.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adaptive Cruise Control (ACC) Menu The EVIC displays the current ACC system settings. The EVIC is located in the upper part of the instrument cluster between the speedometer and the tachometer. The information it displays depends on ACC system status. Press the Menu button (located on the steering wheel) repeatedly until one of the following displays in the EVIC: Menu Button ACC OFF − When ACC is deactivated, the display will read “ACC OFF.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 ACC READY ACC SET − When ACC is activated, the display will read “ACC READY.” − When ACC is set, the set speed will display. 3 1 2 3 4 — — — — Sensed Vehicle Indicator Set Speed Your Vehicle Following Distance Setting: Three Bars = Long; Two Bars = Medium; One Bar = Short.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The set speed will continue to display in place of the odometer reading when changing the EVIC display while ACC is set.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Display Warnings & Maintenance ACC Blinded Warning The ACC Blinded Warning will display when conditions temporarily limit system performance. This most often occurs at times of poor visibility, such as in snow, fog, heavy rain, or when driving into direct sunlight (sunrise or sunset). The ACC system may also become temporarily blinded due to obstructions, such as dirt or ice. In these cases, the EVIC will display “ACC Blinded.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If weather conditions are not a factor, the driver should examine the sensor. It may require cleaning or removal of an obstruction. The sensor is located behind the grille, slightly offset from the center of the grille. • Always keep the sensor clean. Carefully wipe the sensor lens with a soft cloth. Be cautious not to damage the sensor lens. • Do not remove any screws from the sensor or the sensor mount.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 NOTE: Installing a vehicle front-end protector or an aftermarket grille or modifying the grille is not recommended. Doing so may block the sensor and inhibit ACC operation. ACC Unavailable Warning If the system turns off, and the EVIC displays ⬙ACC UNAVAILABLE,⬙ there may be a temporary malfunction that limits ACC functionality. In this case, ACC will be temporarily unavailable. If this occurs, try activating ACC again later, following a key cycle.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Precautions While Driving with ACC In certain driving situations, ACC may have detection issues. In these cases, ACC may brake late or unexpectedly. The driver needs to stay alert and may need to intervene. Offset Driving ACC may not detect a vehicle in the same lane that is offset from your direct line of travel. There will not be sufficient distance to the vehicle ahead.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Using ACC on Hills When driving on hills, ACC may not detect a vehicle in your lane. Depending on the speed, vehicle load, traffic conditions, and the steepness of the hills, ACC performance may be limited. ACC may occasionally provide braking and/or a driver alert that you consider unnecessary. This may be the system’s response to signs, guardrails, and other stationary objects in a curve. This may also occur at the base of dramatic hills.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Changing ACC will not detect a vehicle until it is completely in the lane in which you are traveling. In the illustration shown, ACC has not yet detected the vehicle changing lanes and it will not until it may be too late to take action. ACC will not detect a vehicle until it is completely in the lane. There will not be sufficient distance to the lane-changing vehicle. Always be attentive and ready to apply the brakes if necessary.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Narrow Vehicles Some narrow vehicles traveling near the outer edges of the lane or edging into the lane are not detected until they have moved fully into the lane. There will not be sufficient distance to the vehicle ahead. Stationary Objects and Vehicles ACC does not react to stationary objects and stationary vehicles.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information CLASS 1 LASER PRODUCT Classification Specifications: 21 C.F.R part 1040.10 & 1040.11 DIN EN 60825-1:2003 IEC 60825-1:2001 REAR PARK ASSIST SYSTEM — IF EQUIPPED The Rear Park Assist System is a driver aid that senses for obstacles behind the vehicle. Refer to the Warnings, Cautions, and Notes in this section for system limitations and usage recommendations.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 The warning display contains two sets of yellow and red LEDs, one set to warn of obstacles behind the left rear of the vehicle and the other set to warn of obstacles behind the right rear of the vehicle. The driver can view the LEDs either through the rear view mirror or by looking at the display above the rear window. The system dimly illuminates the two outer most yellow LEDs when it is ON and detecting no obstacles.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING DISPLAY DISTANCES DISPLAY LED 1st LED 2nd LED 3rd LED 4th LED 5th LED 6th LED 7th LED 8th LED OBSTACLE DISTANCE FROM: REAR CORNERS REAR CENTER 59 in. (150 cm) 47 in. (120 cm) 39 in. (100 cm) 31.5 in. (80 cm) 31.5 in. (80 cm) 25.5 in. (65 cm) 25.5 in. (65 cm) 20 in. (50 cm) 20 in. (50 cm) 16 in. (40 cm) 16 in. (40 cm) 6 in. (15 cm) 12 in. (30 cm) NOTE: The Rear Park Assist system will MUTE the radio, if on, when the system is sounding an audio tone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 WARNING! CAUTION! • Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. You are responsible for safety and must continue to pay attention to your surroundings. Failure to do so can result in serious injury or death.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Ensure that the rear bumper is free of dirt and debris to keep the system operating properly. • Jackhammers, large trucks, and other vibrations could affect the performance of the system. If “Service Park Assist System” appears in the Electronic Vehicle Information Center (EVIC) after making sure the rear bumper is clean please see your authorized dealer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 These lights also turn on when a door is opened, or when the unlock button on the remote keyless entry transmitter is pressed, or when the dimmer control is turned fully upward, past the second detent. NOTE: HomeLink威 is disabled when the Vehicle Security Alarm is active. Sunglasses Storage At the rear of the console, a compartment is provided for the storage of a pair of sunglasses.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicle exhaust contains carbon monoxide, a dangerous gas. Do not run your vehicle in the garage while training the transceiver. Exhaust gas can cause serious injury or death. It is recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink威 for more efficient training and accurate transmission of the radio-frequency signal. Your vehicle should be parked outside of the garage while training. 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Then release both the HomeLink威 and hand-held transmitter buttons. If the EVIC display states “DID NOT TRAIN” repeat Step 3. If the signal is too weak, replace the battery in the original hand-held transmitter. It may take up to 30 seconds, or longer in rare cases. The garage door may open & close while you train.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. PROGRAMMING A ROLLING CODE SYSTEM At the garage door opener motor (in the garage), locate the “learn” or “training” button. This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open & close the door). 1 — Garage Door Opener 2 — Training Button 6. Firmly press and release the “learn” or “training” button. The name and color of the button may vary by manufacturer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 7. Return to the vehicle and press the programmed HomeLink威 button twice (holding the button for 2 seconds each time). If the device is plugged in and activates, programming is complete. If the device does not activate, press the button a third time (for 2 seconds) to complete the training. If you are have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the Internet at www.HomeLink.com for information or assistance.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Then proceed with Step 4 under “Programming HomeLink.” earlier in this section. Using HomeLink姞 To operate, simply press and release the programmed HomeLink威 button. Activation will now occur for the trained device (i.e. garage door opener, gate operator, security system, entry door lock, home/office lighting, etc. The hand-held transmitter of the device may also be used at any time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Troubleshooting Tips If you are having trouble programming HomeLink威, here are some of the most common solutions: • Replace the battery in the original transmitter. • Press the Learn Button on the Garage Door Opener to complete the training for Rolling Code. • Did you unplug the device for training, and remember to plug it back in? If you are have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the Internet at www.HomeLink.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. WARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 Opening Sunroof - Express Press the switch rearward and release, and the sunroof will open automatically from any position. The sunroof will open fully and then stop automatically. This is called Express Open. During Express Open operation, any movement of the sunroof switch will stop the sunroof. Closing Sunroof - Express Press the switch forward and release, and the sunroof will close automatically from any position.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunshade Operation The sunshade can be opened manually. However, the sunshade will open automatically as the sunroof opens. Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. NOTE: The sunshade cannot be closed if the sunroof is open.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 Sunroof Fully Closed Press the switch forward and release to ensure that the sunroof is fully closed. ELECTRICAL POWER OUTLETS There are two 12-volt electrical outlets on this vehicle. Both of the outlets are protected by a fuse. NOTE: If desired, the power outlet next to the ash receiver tray (if equipped) can be converted by your authorized dealer to provide power with the ignition switch in the LOCK position.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The center console outlet is powered directly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or prevent engine starting. Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e. cellular phones, etc.).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 CUP HOLDERS Front Seat Cup Holders The cup holders are located in the forward edge of the center console. Front Seat Cup Holders Rear Seat Cup Holders The rear seat cup holders are located in the center armrest between the rear seats. The cup holders are positioned forward in the armrest and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the rear occupants’ elbows.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE Console Features The center console contains two shift bezel cubby bins with rubber mats for holding small items. For vehicles not equipped with navigation radio, the console also contains an extra storage bin located below the climate control, which holds up to four CD jewel cases. Without Vehicle Entertainment System (VES) Two separate storage compartments are also located underneath the armrest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also contains a 12-volt power outlet and a molded-in coin holder (designed to hold various size coins). A slot in the left and right side of the top compartment provides clearance for power cords to pass conveniently out of the bin with the lid closed.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE front-opening lid allows for easy access to the storage compartment for the both the driver and the front passenger. Cargo Area The 60/40 split-folding rear seat provides cargo-carrying versatility. The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters. When the seats are folded down, they provide a continuous, nearly flat extension of the load floor.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 WARNING! • The weight and position of cargo and passengers can change the vehicle center of gravity and vehicle handling. To avoid loss of control resulting in personal injury, follow these guidelines for loading your vehicle: • Always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible. • Place as much cargo as possible in front of the rear axle.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel And Controls . . . . . . . . . . . . . 199 ▫ Compass Display . . . . . . . . . . . . . . . . . . . . . 222 䡵 Base Instrument Cluster . . . . . . . . . . . . . . . . . . 200 ▫ Telephone — If Equipped . . . . . . . . . . . . . . . 224 䡵 Premium Instrument Cluster . . . . . . . . . . . . . . . 201 ▫ Navigation — If Equipped . . . . . . . . . . . . . . . 226 䡵 Instrument Cluster Descriptions . . . . . . . . . . . .
196 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Electrical Disturbances . . . . . . . . . . . . . . . . . . 233 ▫ AM Reception . . . . . . . . . . . . . . . . . . . . . . . 233 ▫ FM Reception . . . . . . . . . . . . . . . . . . . . . . . . 233 䡵 Sales Code REN — Multimedia System — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 ▫ Operating Instructions — Satellite Radio (If Equipped) . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 197 䡵 Sales Code RES — AM/FM Stereo Radio With CD Player (MP3 AUX Jack) . . . . . . . . . . . . . . . . 256 ▫ Operating Instructions - Radio Mode . . . . . . . 256 ▫ Operation Instructions - CD Mode For CD And MP3 Audio Play . . . . . . . . . . . . . . . . . . . . . . 262 ▫ Notes On Playing MP3 Files . . . . . . . . . . . . . 264 ▫ Satellite Antenna . . . . . . . . . . . . . . . . . . . . . . 269 ▫ Reception Quality . . . . . . . . . . . . . . . . . . . . .
198 UNDERSTANDING YOUR INSTRUMENT PANEL 䡵 Remote Sound System Controls — If Equipped . . 279 䡵 CD/DVD Disc Maintenance . . . . . . . . . . . . . . . 281 䡵 Radio Operation And Cellular Phones . . . . . . . . 281 䡵 Climate Controls . . . . . . . . . . . . . . . . . . . . . . . 281 ▫ Manual Air Conditioning And Heating System . . . . . . . . . . . . . . . . . . . . . . 282 ▫ Automatic Temperature Control — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 284 ▫ Operating Tips . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 199 INSTRUMENT PANEL AND CONTROLS 4 1 2 3 4 5 — Air Outlet — Instrument Cluster — Hazard Switch — Analog Clock — Electronic Stability Program Off Button* / Traction Control System Off Button* 6 — Glove Box 7 — Radio 8 — Climate Control 9 — Heated Seat Switch* 10 — Power Outlet 11 — Ash Tray* 16 — Headlight Switch 12 — Storage Compartment* * If Equipped 13 — Ignition Switch 14 — Hood Release 15 — Trunk Release Switch
200 UNDERSTANDING YOUR INSTRUMENT PANEL BASE INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL 201 PREMIUM INSTRUMENT CLUSTER 4
202 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Electronic Speed Control/Adaptive Cruise Control (ACC) Indicator Light — If Equipped This light will turn on when the electronic speed control or ACC is ON. (See page 148 for more information.) (See page 152 for more information.) 2. Low Fuel Indicator Light This light will turn on and a single chime will sound when the fuel level drops to 1/8 tank. (See page 369 for more information.) 3.
UNDERSTANDING YOUR INSTRUMENT PANEL 203 sure to keep a record of the reading before and after the service so that the correct mileage can be determined. On vehicles equipped with a Premium Instrument Cluster, this display shows the Electronic Vehicle Information Center (EVIC) messages when the appropriate conditions exist. (See page 213 for more information.
204 UNDERSTANDING YOUR INSTRUMENT PANEL the oil change indicator system (after performing the scheduled maintenance) perform the following procedure: 1. Turn the ignition switch to the ON position (Do not start the engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition switch to the LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. 7.
UNDERSTANDING YOUR INSTRUMENT PANEL 205 If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes. If the ABS light does not turn on when the Ignition switch is turned to the ON position, have the light inspected by an authorized dealer. (See page 325 for more information.) 10.
206 UNDERSTANDING YOUR INSTRUMENT PANEL indicated by the Brake Warning Light, which will turn on when the brake fluid level in the master cylinder drops below a specified level. The light will remain on until the cause is corrected. NOTE: The light may flash momentarily during sharp cornering maneuvers due to a change in fluid level. If so, the vehicle should have service performed and the brake fluid level checked. Immediate repair is necessary if brake failure is indicated.
UNDERSTANDING YOUR INSTRUMENT PANEL 207 light shows only that the parking brake is applied. It does not show the degree of brake application. (See page 324 for more information.) 13. Electronic Stability Program (ESP)/Traction Control System (TCS) Indicator Light — If Equipped If this indicator light flashes during acceleration, ease up on the accelerator and apply as little throttle as possible. Adapt your speed and driving to the prevailing road conditions, and do not switch off the ESP.
208 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph. 15. Trip Odometer Button Trip Odometer Button — Base Cluster The word ⬙TRIP⬙ will appear when this button is pressed.
UNDERSTANDING YOUR INSTRUMENT PANEL 209 18. Seat Belt Reminder Light This light will turn on for 5 to 8 seconds as a bulb check when the ignition switch is first turned ON. A chime will sound if the driver’s seat belt is unbuckled during the bulb check. The Seat Belt Warning Light will flash or remain on continuously if the driver’s seat belt remains unbuckled after the bulb check or when driving. (See page 49 for more information.) 19.
210 UNDERSTANDING YOUR INSTRUMENT PANEL 22. Tire Pressure Monitoring Telltale Light — If Equipped Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label.
UNDERSTANDING YOUR INSTRUMENT PANEL 211 When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.
212 UNDERSTANDING YOUR INSTRUMENT PANEL driving, turn off some of the vehicle’s non-essential electrical devices (i.e. radio) or slightly increase engine speed (if at idle). If the light remains on, it means that the charging system is experiencing a problem. See your local authorized dealer to obtain SERVICE IMMEDIATELY. 24. Malfunction Indicator Light This light is part of an onboard diagnostic system called OBD. The OBD system monitors engine and automatic transmission control systems.
UNDERSTANDING YOUR INSTRUMENT PANEL 213 ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED mounted buttons (described in this section) are also equipped with the EVIC.
214 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: Press and release the MENU button and the mode displayed will change between Trip Functions, Navigation (if equipped), System MENU Status, Personal Settings, and Telephone (if Button equipped). Press the FUNCTION SELECT button to accept a selection. The FUNCTION SELECT button also functions as a remote sound system conFUNC- trol.
UNDERSTANDING YOUR INSTRUMENT PANEL 215 Electronic Vehicle Information Center (EVIC) Displays When the appropriate conditions exist, the Electronic Vehicle Information Center (EVIC) displays the following messages: • Turn Signal On (with a continuous warning chime if the vehicle is driven more than 1 mile [1.
216 UNDERSTANDING YOUR INSTRUMENT PANEL • ACC Off — When the Adaptive Cruise Control (ACC) system is turned off. Refer to “Adaptive Cruise Control (ACC)” in Section 3 of this manual for detailed information (if so equipped). • ACC Ready — When the Adaptive Cruise Control (ACC) system is activated. Refer to “Adaptive Cruise Control (ACC)” in Section 3 of this manual for detailed information (if so equipped). • ACC Set — After setting the desired speed in the Adaptive Cruise Control (ACC) system.
UNDERSTANDING YOUR INSTRUMENT PANEL 217 • ACC Blinded — If the Adaptive Cruise Control (ACC) system deactivates due to performance limiting conditions. Refer to “Adaptive Cruise Control (ACC)” in Section 3 of this manual for detailed information (if so equipped). • ACC Unavailable — If the Adaptive Cruise Control (ACC) system turns off due to a temporary malfunction that limits functionality. Refer to “Adaptive Cruise Control (ACC)” in Section 3 of this manual for detailed information (if so equipped).
218 UNDERSTANDING YOUR INSTRUMENT PANEL • Left Rear Low Pressure (with a single chime). Refer to information on “Tire Pressure” and “Tire Pressure Monitor” in the “Starting And Operating” section of this manual. • Right Front Low Pressure (with a single chime). Refer to information on “Tire Pressure” and “Tire Pressure Monitor” in the “Starting And Operating” section of this manual. • Right Rear Low Pressure (with a single chime).
UNDERSTANDING YOUR INSTRUMENT PANEL 219 1. Turn the ignition switch to the ON position (Do not start the engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition switch to the LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure.
220 UNDERSTANDING YOUR INSTRUMENT PANEL the EVIC display. This message will appear whenever MDS allows the engine to operate on four cylinders, which will vary depending on driving habits and vehicle usage. can be used to modify driving habits in order to increase the time in which the fuel saver mode is active.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 and average fuel economy, according to the current fuel tank level. DTE cannot be reset through the FUNCTION SELECT button. • Trip B Shows the total distance traveled for trip B since the last reset. NOTE: Significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of the vehicle, regardless of the DTE displayed value.
222 UNDERSTANDING YOUR INSTRUMENT PANEL seconds of resetting the currently displayed function (>Reset ALL will display during this 3 second window). Compass Display The compass readings indicate the direction the vehicle is facing. Press and release the compass button to display one of eight comCOM- pass readings and the outside temperature. PASS Button Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to set the compass manually.
UNDERSTANDING YOUR INSTRUMENT PANEL 223 Compass Variance Compass Variance is the difference between magnetic North and Geographic North. In some areas of the country, the difference between magnetic and geographic North is great enough to cause the compass to give false readings. If this occurs, the compass variance must be set using the following procedure: NOTE: Magnetic materials should be kept away from the overhead console. This is where the compass sensor is located.
224 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Turn the ignition switch ON. 2. Press and hold the compass button for approximately 2 seconds. 3. Press the SCROLL button until “Compass Variance” message and the last variance zone number displays in the EVIC. 4. Press and release FUNCTION SELECT button until the proper variance zone is selected according to the map. 5. Press and release the compass button to exit. Telephone — If Equipped Press and release the MENU button until “Telephone” displays in the EVIC.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 The EVIC displays this symbol to indicate an incoming call. Incoming Call The EVIC displays this symbol to indicate that you have voice mail. Voice Mail The EVIC displays this symbol to indicate that the UConnect™ phone is currently in analog mode. Analog The EVIC displays this symbol to indicate that the UConnect™ phone is currently roaming. Roaming The EVIC displays this symbol to indicate a text message.
226 UNDERSTANDING YOUR INSTRUMENT PANEL The EVIC displays this symbol to indicate that a phone connection has been made. Call in Progress The EVIC displays this symbol to indicate that the UConnect™ phone is currently not available. Phone Not Available Navigation — If Equipped Navigation Display Control Press and release the MENU button until Navigation displays in the EVIC. When the Navigation System is On, the steering wheel buttons can be used to select the Map or Menu display on the Navigation Unit.
UNDERSTANDING YOUR INSTRUMENT PANEL 227 Personal Settings (Customer Programmable Features) Personal Settings allows the driver to set and recall features when the transmission is in PARK. NOTE: The EVIC will not change the UConnect™ language selection. Please refer to “Language Selection” in the HANDS–FREE COMMUNICATION (UConnect™) section of this manual for details. Press and release the MENU button until Personal Settings displays in the EVIC.
228 UNDERSTANDING YOUR INSTRUMENT PANEL “Remote Key Unlock” When Driver Door 1st Press is selected, only the driver’s door will unlock on the first press of the remote keyless entry unlock button. When Driver Door 1st Press is selected, you must press of the remote keyless entry unlock button twice to unlock the passenger’s doors. When All Doors 1st Press is selected, all of the doors will unlock on the first press of the remote keyless entry unlock button.
UNDERSTANDING YOUR INSTRUMENT PANEL 229 the FUNCTION SELECT button until “ON” or “OFF” appears. When OFF is selected, the system reverts to the standard intermittent wiper operation. “Automatically Move Seat Back on Exit” — If Equipped This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. To make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears.
230 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Turning the headlights on during the daytime causes the instrument panel lights to dim. To increase the brightness, refer to “Lights” in Section 3 of this manual. “Delay Turning Headlights Off” When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. To make your selection, press and release the FUNCTION SELECT button until “0,” “30,” “60,” or “90” appears.
UNDERSTANDING YOUR INSTRUMENT PANEL 231 “Confirmation of Voice Commands” — If Equipped When ON is selected, all voice commands from the UConnect™ system are confirmed. To make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears. “Display Units of Measure in” The EVIC, odometer, and navigation system (if equipped) can be changed between English and Metric units of measure.
232 UNDERSTANDING YOUR INSTRUMENT PANEL SETTING THE ANALOG CLOCK To set the analog clock at the top center of the instrument panel, press and hold the button until the setting is correct. Analog Clock RADIO GENERAL INFORMATION Radio Broadcast Signals Your new radio will provide excellent reception under most operating conditions.
UNDERSTANDING YOUR INSTRUMENT PANEL 233 Electrical Disturbances Radio waves may pick up electrical disturbances during transmission. They mainly affect the wave amplitude, and thus remain a part of the AM reception. They interfere very little with the frequency variations that carry the FM signal.
234 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE REN — MULTIMEDIA SYSTEM — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The REN multimedia system contains a radio, CD/DVD player, USB port, a 20 gigabyte Hard Drive (HDD), and a “JukeBox” (virtual CD changer). Sirius Satellite Radio is optional. The 6.5-inch touch screen allows for easy menu selection. A 20 gigabyte Hard Drive (HDD) allows uploads of music and photos from CDs or through the USB port.
UNDERSTANDING YOUR INSTRUMENT PANEL 235 Operating Instructions — Hands-Free Communication (UConnect™) (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual for detailed operating instructions. 4. To move the minute forward, touch the screen where the word “Min” with the arrow pointing upward is displayed. To move the minute backward, touch the screen where the word “Min” with the arrow pointing downward is displayed. Clock Setting Procedure 5.
236 UNDERSTANDING YOUR INSTRUMENT PANEL 3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” Touch the screen where the words “Daylight Savings” are displayed to change the current setting. Show Time if Radio is Off When selected, this feature will display the time of day on the touch screen when the system is turned off. Proceed as follows to change the current setting: 1. Turn on the system. 2. Touch the screen where the time is displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL 237 SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio.
238 UNDERSTANDING YOUR INSTRUMENT PANEL will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to search for the next listenable station, in AM, FM or Satellite (if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. To stop the search, press the SCAN button a second time.
UNDERSTANDING YOUR INSTRUMENT PANEL 239 3. After adjusting the hours, press the right side TUNE control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE control knob. Press the TUNE control knob to save time change. 5. To exit, press any button/knob or wait 5 seconds. The clock can also be set by pressing the SETUP button and selecting the “SET HOME CLOCK” entry. Once in this display follow the above procedure, starting at step 2.
240 UNDERSTANDING YOUR INSTRUMENT PANEL Press the rotary TUNE control knob a third time and TREBLE will display. Turn the TUNE control knob to the right or left to increase or decrease the Treble tones. allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information. Press the rotary TUNE control knob a fourth time and BALANCE will display. Turn the TUNE control knob to the right or left to adjust the sound level from the right or left side speakers.
UNDERSTANDING YOUR INSTRUMENT PANEL 241 Program Type News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 16 Digit-Character Display News Nostalga Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R&B Sports Talk Top 40 Program Type Weather 16 Digit-Character Display Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency st
242 UNDERSTANDING YOUR INSTRUMENT PANEL • DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current highlighted selection. Use the remote control to scroll up and down the menu (If Equipped). • DISC Play/Pause - You can toggle between playing the DVD and pausing the DVD by pushing the SELECT button (If Equipped).
UNDERSTANDING YOUR INSTRUMENT PANEL 243 • Set Home Clock - Pressing the SELECT button will allow user to set the clock. Turn the TUNE control knob to adjust the hours and then press and turn the TUNE control knob to adjust the minutes. Press the TUNE control knob again to save changes. • Player Defaults - Selecting this item will allow the user to scroll through the following items, and set defaults according to customer preference.
244 UNDERSTANDING YOUR INSTRUMENT PANEL Audio DRC — If Equipped Selecting this item will allow the user to limit maximum audio dynamic range - The default is set to ⬙High,⬙ and under this setting, dialogues will play at 11 db higher than if the setting is ⬙Normal.⬙ Aspect Ratio — If Equipped Selecting this item will allow the user to choose between wide screen, pan scan, and letter box.
UNDERSTANDING YOUR INSTRUMENT PANEL 245 window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM, 12 FM, and 12 Satellite (if equipped) stations to be stored into push-button memory. The stations stored in SET 2 memory can be selected by pressing the push-button twice. Every time a preset button is used, a corresponding button number will display.
246 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The ignition switch must be in the ON or ACC position to operate the radio. LOAD Button — Loading Compact Disc(s) Press the LOAD button and the push-button with the corresponding number (1-6) where the CD is being loaded. The radio will display PLEASE WAIT and prompt when to INSERT DISC. After the radio displays ⬙INSERT DISC,⬙ insert the CD into the player.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 SCAN Button (CD MODE) Press the Scan button to scan through each track on the CD currently playing. TIME Button (CD MODE) Press this button to change the display from a large CD playing time display to a small CD playing time display. RW/FF (CD MODE) Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner.
248 UNDERSTANDING YOUR INSTRUMENT PANEL The radio uses the following limits for file systems: • Maximum number of directory levels: 8 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙.⬙ and a 3-character extension) • Level 2: 31 (including a separator ⬙.⬙ and a 3-character extension) Multisession disc formats are supported by the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 249 MPEG Specification MPEG-1 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 Bit rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48 160, 128, 144, 112, 96, 80, 64, 56, 48 MPEG-2 Audio Layer 3 24, 22.05, 16 WMA Specification Sampling Frequency (kHz) Bit Rate (kbps) 44.1 and 48 48, 64, 96, 128, 160, 192 VBR WMA ID3 Tag information for artist, song title, and album title are supported for version 1 ID3 tags.
250 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE control knob. Selecting a folder by pressing the TUNE control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after 5 seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. Operating Instructions - Hands Free Phone (UConnect™) (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio” in this section. TIME Button (Auxiliary Mode) Press this button to change the display from elapsed playing time to time of day.
252 UNDERSTANDING YOUR INSTRUMENT PANEL Macrovision This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited DTS ⬙DTS⬙ and ⬙DTS 2.0⬙ are trademarks of Digital Theater Systems, Inc.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 music and photos from CDs or through the USB port. While the Gracenote database finds the artist, track, and title for the music. camera, and on some models a dual display screen operation. Refer to your “Navigation User’s Manual” for detailed operating instructions. An auxiliary input jack permits passengers to listen to a portable MP3 player through the vehicle’s speakers.
254 UNDERSTANDING YOUR INSTRUMENT PANEL Changing the Time Zone 1. Turn on the system. 2. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. If the words “Time: GPS Time” are displayed at the top of the screen, proceed to Step 4. Otherwise, proceed to Step 3. 3. If the words “Time: User Clock” are displayed at the top of the screen, touch the bottom of the screen where the words “User Clock” are displayed. The GPS time setting menu will appear on the screen. 4.
UNDERSTANDING YOUR INSTRUMENT PANEL 255 2. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. If the words “Time: User Clock” are displayed at the top of the screen, proceed to Step 4. Otherwise, proceed to Step 3. 3. If the words “Time: GPS Time” are displayed at the top of the screen, touch the bottom of the screen where the words “GPS Time” are displayed. The user clock time setting menu will appear on the screen. 4.
256 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RES — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Press the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 257 to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button Pressing the SCAN button causes the tuner to search for the next listenable station in AM or FM frequencies, pausing for 5 seconds at each listenable station before continuing to the next. To stop the search, press the SCAN button a second time.
258 UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure 1. Press and hold the TIME button, until the hours blink. 2. Adjust the hours by turning the right side TUNE control knob. 3. After adjusting the hours, press the right side TUNE control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE control knob. Press the TUNE control knob to save time change. 5. To exit, press any button/knob or wait 5 seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 259 Setting the Tone, Balance, and Fade Press the rotary TUNE control knob and BASS will display. Turn the TUNE control knob to the right or left to increase or decrease the Bass tones. Press the rotary TUNE control knob a fifth time and FADE will display. Turn the TUNE control knob to the left or right to adjust the sound level between the front and rear speakers. Press the rotary TUNE control knob a second time and MID will display.
260 UNDERSTANDING YOUR INSTRUMENT PANEL Program Type No program type or undefined Adult Hits Classical Classic Rock College Country Foreign Language Information Jazz News Nostalgia Oldies Personality Public 16 Digit-Character Display None Adlt Hit Classicl Cls Rock College Country Language Inform Jazz News Nostalga Oldies Persnlty Public Program Type Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather 16 Digit-Character Display R&B Rel Mus
UNDERSTANDING YOUR INSTRUMENT PANEL 261 station with the same selected Music Type name. The Music Type function only operates when in the FM mode. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station. SETUP Button Pressing the SETUP button allows you to select between the following items: • Set Clock — Pressing the SELECT button will allow user to set the clock.
262 UNDERSTANDING YOUR INSTRUMENT PANEL Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 These buttons tune the radio to the stations that you commit to push-button memory {12 AM and 12 FM stations}. DISC Button Pressing the DISC button will allow you to switch from AM/FM modes to Disc modes. Operation Instructions - CD MODE for CD and MP3 Audio Play NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 263 CAUTION! • This CD player will accept 4 3/4 inch (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player. Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player.
264 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display. RW/FF Press the RW button to stop the CD at the beginning of the current CD track/title. Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner.
UNDERSTANDING YOUR INSTRUMENT PANEL 265 files properly and may be unable to play the file normally. UDF and Apple HFS formats are not supported. The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead.
266 UNDERSTANDING YOUR INSTRUMENT PANEL rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specification Sampling Frequency (kHz) MPEG-1 Audio Layer 3 48, 44.1, 32 MPEG-2 Audio Layer 3 24, 22.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE control knob. Selecting a folder by pressing the TUNE control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after 5 seconds.
268 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for 5 seconds (when ignition is off). Operating Instructions - Hands Free Phone (UConnect™) (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio” in this section.
UNDERSTANDING YOUR INSTRUMENT PANEL 269 further information, call the toll-free number 888-5397474, or visit the Sirius web site at www.sirius.com. Please have the following information available when calling: selected. Press the TUNE control knob and the Sirius ID number will display. The Sirius ID number display will time out in 2 minutes. Press any button on the radio to exit this screen. 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID).
270 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality Satellite reception may be interrupted due to one of the following reasons: • The vehicle is parked in an underground parking structure or under a physical obstacle. • Dense tree coverage may interrupt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage.
UNDERSTANDING YOUR INSTRUMENT PANEL 271 3 seconds will make the radio display the Song Title all of the time (press and hold again to return to normal display). By pressing the SEEK button when the Music Type function is active, the radio will be tuned to the next channel with the same selected Music Type name. RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arrows.
272 UNDERSTANDING YOUR INSTRUMENT PANEL Select the button (1-6) you wish to lock onto this channel and press and release that button. If a button is not selected within 5 seconds after pressing the SET button, the channel will continue to play but will not be stored into push-button memory. You may add a second channel to each push-button by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 273 4 Opening the Rear Seat Video Entertainment System VES™ Video Screen • The LCD Screen swings up from the rear of the armrest to allow the rear seat passenger(s) to view the display. NOTE: Close the armrest after the LCD screen has been raised to its viewing position. • The touch screen radio and DVD player controls allow front seat operation for easy setup in the case of younger rear seat passengers.
274 UNDERSTANDING YOUR INSTRUMENT PANEL • A battery-powered infrared remote control that snaps into a molded compartment in the center console armrest upper storage bin. Audio/Video RCA Jacks (AUX Jacks) on the rear of the center console enable the monitor to display video directly from a video camera, connect video games for display on the screen, or play music directly from an MP3 player. 1. Video in (yellow) 2. Left audio in (white) 3.
UNDERSTANDING YOUR INSTRUMENT PANEL 275 UNIVERSAL CONSUMER INTERFACE (UCI) — IF EQUIPPED • the iPod威 battery charges when plugged into the UCI connector. NOTE: This section is for sales code RES and REQ radios only with UConnect.™ For sales code REN touch screen radio, refer to the separate User’s Manual. Connecting the iPod姞 Use the optional connection cable to connect an iPod威 to the vehicle’s UCI connector (which is located in the glove box on some vehicles. This location may vary with vehicle).
276 UNDERSTANDING YOUR INSTRUMENT PANEL Play Mode When switched to UCI mode the iPod威 will be in Play mode. In this Play mode , you may use the following buttons on the radio faceplate to control the iPod威 and display data: TUNE/SCROLL Knob Use the “TUNE/SCROLL” knob to go to the next or previous track. The “TUNE/SCROLL” knob functions similar to the scroll wheel on the iPod威. Turning it clockwise (forward) by one click while playing a track skips to the next track.
UNDERSTANDING YOUR INSTRUMENT PANEL 277 previous track in the list, if you press this button at any other time in the current track it will go back to the beginning of the track. If the right (up) button is pressed during Play mode, it will go to the next track in the list. INFO Button Press the “INFO” button while a track is playing to see the information (Track Title, Artist, Album, etc.) for that track. Each press the “INFO” button will take you to the next screen of data for that track.
278 UNDERSTANDING YOUR INSTRUMENT PANEL List or Browse Mode During Play mode, pressing any of the following buttons will take you to List mode. List mode enables you to scroll through the list of menus and tracks on the iPod威. TUNE/SCROLL Knob In the List mode, the “TUNE/SCROLL” knob functions in a similar manner as the scroll wheel on the iPod威. Turning the “TUNE/SCROLL” knob clockwise (forward) and counter-clockwise (backward) scrolls through lists, displaying the track detail on the radio display.
UNDERSTANDING YOUR INSTRUMENT PANEL 279 To exit the List mode without selecting a track, press the same preset button again to go back to Play mode. LIST Button Pressing the “LIST” button will take to the top level menu of the iPod威. This takes you to the same top level menu as on your iPod威. Turn the “TUNE/SCROLL” knob to list the top menu item you wish to select and then press the “TUNE/SCROLL” knob.
280 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicles equipped with steering wheel mounted buttons are also equipped with the Electronic Vehicle Information Center (EVIC). The EVIC features a driver-interactive display. This is located in the upper part of the instrument cluster between the speedometer and tachometer. VOLUME Button The VOLUME button controls the sound level of the sound system. Press the top of the VOLUME button to increase the sound level.
UNDERSTANDING YOUR INSTRUMENT PANEL 281 CD/DVD DISC MAINTENANCE To keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper, paper CD labels, or tape to the disc; avoid scratching the disc. 4. Do not use solvents such as benzine, thinner, cleaners, or antistatic sprays. 5. Store the disc in its case after playing. 6.
282 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Air Conditioning and Heating System Blower Control The rotary knob on the left controls the blower. The control has an OFF position and four speed settings. The blower will remain on until the control is turned to the OFF position or the ignition is turned OFF. Manual Temperature Controls Temperature Control The rotary knob in the center controls air temperature.
UNDERSTANDING YOUR INSTRUMENT PANEL 283 Mode Control The rotary knob on the right controls airflow distribution. Dots between each of the mode selections identify intermediate modes that allow the operator to fine-tune airflow distribution. The mode settings are as follows: • Defrost Air is directed to the windshield through the outlets at the base of the windshield. Air is also directed to the front door windows through the side window demister grilles.
284 UNDERSTANDING YOUR INSTRUMENT PANEL • Recirculation Control The mode control knob also controls the recirculation feature. You can choose BiLevel Recirculation air outlets, Panel Recirculation air outlets, or a mix or both while in this mode. Normally, air enters from outside the vehicle. However, when in Recirculation mode air inside the vehicle is re-used. Use this mode to cool the inside of the vehicle rapidly.
UNDERSTANDING YOUR INSTRUMENT PANEL 285 the controls on the climate control, from a dual sunsensor located in the top of the instrument panel, from an infrared sensor located in the face of the climate control, and from various sensors located throughout the vehicle. The controls on the climate control provide the system with operator input. The dual sun-sensor monitors sun load coming through the windshield. The infrared sensor independently measures the surface temperature of the driver and passenger.
286 UNDERSTANDING YOUR INSTRUMENT PANEL Air conditioning in this system is automatic. Pressing the Air Conditioning Control button while in AUTO mode will cause the LED in the control button to flash three times and then turn off. This indicates that the system is in AUTO mode and requesting the air conditioning is not necessary. The system will automatically control recirculation. However, pressing the Recirculation Control button will temporarily put the system in recirculation mode (ten minutes).
UNDERSTANDING YOUR INSTRUMENT PANEL 287 Manual Operation This system offers a full complement of manual override features, which consist of Blower Preferred Automatic, Mode Preferred Automatic, or Blower and Mode Preferred Automatic. This means the operator can override the blower, the mode, or both. There is a manual blower range for times when the AUTO setting is not desired. The blower can be set to any fixed blower speed by rotating the Blower Control knob (on the left).
288 UNDERSTANDING YOUR INSTRUMENT PANEL
UNDERSTANDING YOUR INSTRUMENT PANEL 289 The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control knob (on the right) to one of the following positions. • Defrost Air is directed to the windshield through the outlets at the base of the windshield. Air is also directed to the front door windows through the side window demister grilles. • Defrost/Floor Air flows through the front and rear floor outlets and the outlets at the base of the windshield.
290 UNDERSTANDING YOUR INSTRUMENT PANEL turn off the air conditioning. An LED in the button illuminates when manual compressor operation is selected. NOTE: To control the air conditioning manually, the mode selector must be moved out of the AUTO position. • Recirculation Control This button can be used to block out smoke, odors, dust, high humidity, or if rapid cooling is desired. The recirculation mode should only be used temporarily. An LED in the button illuminates when the recirculation mode is active.
UNDERSTANDING YOUR INSTRUMENT PANEL 291 Winter Operation Use of the air Recirculation mode during winter months is not recommended because it may cause window fogging. Vacation Storage Anytime you store your vehicle, or keep it out of service (i.e. vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air and high blower setting.
292 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions
UNDERSTANDING YOUR INSTRUMENT PANEL 293 REAR WINDOW FEATURES Electric Rear Window Defroster The electric Rear Window Defroster Control is located on the climate control. Press this button to turn on the rear window defroster and the heated side mirrors (if equipped). An LED in the button will illuminate when the rear window defroster is ON.
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . . 299 ▫ Automatic Transmission . . . . . . . . . . . . . . . . 300 ▫ Normal Starting (Tip Start) . . . . . . . . . . . . . . 301 ▫ Extremely Cold Weather (Below ⫺20°F Or ⫺29°C) . . . . . . . . . . . . . . . . 301 ▫ Automatic Transmission — General Information . . . . . . . . . . . . . . . . . . . 304 ▫ Brake/Transmission Shift Interlock System . . . 306 ▫ 4 Speed Automatic Transmission . . . . . . . . . .
296 STARTING AND OPERATING ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . . . . . 319 ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 䡵 Driving Through Water . . . . . . . . . . . . . . . . . . 320 ▫ Flowing/Rising Water . . . . . . . . . . . . . . . . . . 320 ▫ Shallow Standing Water . . . . . . . . . . . . . . . . . 321 䡵 Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . . 322 䡵 Brake System . . . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 297 ▫ Limited Use Spare — If Equipped . . . . . . . . . 348 ▫ Premium System — If Equipped . . . . . . . . . . 360 ▫ Tire Spinning . . . . . . . . . . . . . . . . . . . . . . . . 349 ▫ General Information . . . . . . . . . . . . . . . . . . . 364 ▫ Tread Wear Indicators . . . . . . . . . . . . . . . . . . 350 䡵 Fuel Requirements . . . . . . . . . . . . . . . . . . . . . . 365 ▫ Life Of Tire . . . . . . . . . . . . . . . . . . . . . . . . . 350 ▫ 2.7L Engine . . . . . . . . . .
298 STARTING AND OPERATING ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . . 371 ▫ Trailer Hitch Classification . . . . . . . . . . . . . . . 379 䡵 Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . . . 372 ▫ Trailer Towing Weights (Maximum Trailer Weight Ratings) . . . . . . . . . 380 ▫ Vehicle Certification Label . . . . . . . . . . . . . . . 372 ▫ Gross Vehicle Weight Rating (GVWR) . . . . . . . 372 ▫ Gross Axle Weight Rating (GAWR) . . . . . . . . . 373 ▫ Overloading . . . . . . . .
STARTING AND OPERATING 299 STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in the ignition.
300 STARTING AND OPERATING Automatic Transmission The gear selector must be in the “N” (Neutral) or “P” (Park) position before you can start the engine. Apply the brakes before shifting into any driving gear. CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
STARTING AND OPERATING 301 Normal Starting (Tip Start) NOTE: Normal Starting of either a cold or a warm engine is obtained without pumping or depressing the accelerator pedal. Do not press the accelerator. Use the Fob with Integrated Key to briefly turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running.
302 STARTING AND OPERATING If Engine Fails To Start WARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury. • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way.
STARTING AND OPERATING 303 After Starting The idle speed is controlled automatically and it will decrease as the engine warms up. ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather. Connect the cord to a standard 110-115 volt AC electrical outlet with a grounded, three-wire extension cord. The engine block heater cord is routed under the hood on the driver side of the vehicle.
304 STARTING AND OPERATING WARNING! It is dangerous to shift the selector lever out of “P” or “N” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal.
STARTING AND OPERATING 305 • The electronically controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating. Therefore, the first few shifts on a new vehicle may be somewhat abrupt or soft until after the break-in period. This is a normal condition, and precision shifts will develop within a few shift cycles. The selector lever is automatically locked while in the “P” (Park) position.
306 STARTING AND OPERATING Over Temperature Mode The transmission electronics constantly monitor the transmission oil temperature. If the transmission exceeds normal operating temperature, the transmission will change the way it shifts to help control the condition. This may result in a slightly different feeling or response during normal operation in “D” (Drive) position. After the transmission cools down, it will return to normal operation.
STARTING AND OPERATING 307 tab, which can be accessed through a hole inside the bin. While the override is pressed, the shifter can be moved out of the “P” (Park) position without pressing the brake. After operation, return the rubber storage tray to its original position. 4 Speed Automatic Transmission Shifting from “D” (Drive) to “P” (Park) or “R” (Reverse) (or from P or R to D) should be done only after the accelerator pedal is released and the vehicle is stopped.
308 STARTING AND OPERATING Never use “P” (Park) while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a flat surface, place the gear selector in the “P” (Park) position first, and then apply the parking brake. When parking on a hill, it is important to set the parking brake before placing the gear selector in “P” (Park), otherwise the load on the transmission locking mechanism may make it difficult to move the selector out of park.
STARTING AND OPERATING 309 CAUTION! CAUTION! Damage to the shifter could result if the selector lever is moved out of “P” (Park) before the ignition is turned from the LOCK to ON position. Coasting the vehicle or driving for any other reason with selector lever in NEUTRAL can result in transmission damage. “R” (Reverse) For moving the vehicle rearward. Always stop before moving the lever to “R” (Reverse), except when rocking the vehicle. “N” (Neutral) Engine may be started in this range.
310 STARTING AND OPERATING shifts, and the best fuel economy. Select the “3” range when frequent transmission shifting occurs when using the Overdrive range, such as when operating the vehicle under heavy loading conditions (in hilly terrain, traveling into strong head winds, or while towing heavy trailers. “3” (Third) This range eliminates shifts into Overdrive. The transmission will operate normally in First, Second and Third while in this range.
STARTING AND OPERATING 311 CAUTION! Never race the engine with the brakes on and the vehicle in gear, and never hold the vehicle on an incline without applying the brakes. These practices can cause overheating and damage to the transmission. Torque Converter Clutch A feature designed to improve fuel economy has been added to the automatic transmission of this vehicle. A clutch within the torque converter engages automatically at calibrated speeds.
312 STARTING AND OPERATING Transmission Limp Home Mode The transmission is monitored for abnormal conditions. If a condition is detected that could cause damage, the transmission automatically shifts into second gear. The transmission remains in second gear despite the forward gear selected. “P” (Park), “R” (Reverse), and “N” (Neutral) will continue to operate. This Reset feature allows the vehicle to be driven to a dealer for service without damaging the transmission.
STARTING AND OPERATING 313 Never use “P” (Park) while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a flat surface, place the gear selector in the “P” (Park) position first, and then apply the parking brake. Selector Lever Gear Ranges “P” (Park) “P” (Park) supplements the parking brake by locking the transmission. The engine can be started in this range.
314 STARTING AND OPERATING WARNING! CAUTION! Never use “P” (Park) position on an automatic transmission as a substitute for the parking brake. Always apply parking brake fully when parked to guard against vehicle movement and possible injury or damage. Damage to the shifter could result if the selector lever is moved out of “P” (Park) before the ignition is turned from the LOCK to ON position.
STARTING AND OPERATING 315 CAUTION! Coasting the vehicle or driving for any other reason with selector lever in NEUTRAL can result in transmission damage. WARNING! Do not coast in “N” (Neutral) and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have an accident. “D” (Drive) This range should be used for most city and highway driving.
316 STARTING AND OPERATING the selector lever in the “D -” direction and the transmission will shift from the current gear to the next lower gear. Press and hold the selector lever in the “D-” direction and the transmission will shift from the current gear directly to the next lowest gear for best acceleration.
STARTING AND OPERATING 317 damage, the transmission will engage Limp Home Mode. If vehicle acceleration worsens, or the transmission no longer shifts, the transmission is most likely operating in the Limp Home Mode. In this mode, the transmission will remain in the current gear until the vehicle is brought to a stop. After the vehicle has stopped, “P” (Park), “R” (Reverse), and “N” (Neutral) will continue to operate. Second gear will operate in the “D” (Drive) shifter position.
318 STARTING AND OPERATING In Permanent Limp Home Mode, “P” (Park), “R” (Reverse), and “N” (Neutral) will continue to operate. Second gear will operate in the “D” (Drive) shifter position. The malfunction indicator light may illuminate. AUTOSTICK姞 — IF EQUIPPED Autostick威 is a driver-interactive transmission that offers manual gear shifting to provide you with more control of the vehicle.
STARTING AND OPERATING 319 ALL WHEEL DRIVE — IF EQUIPPED This feature provides full time All Wheel Drive (AWD) with Anti-lock Brake System (ABS)/Traction Control. The front wheels provide 38% of the torque, and the rear wheels provide 62% of the torque. The system is automatic with no driver inputs or additional driving skills required. CAUTION! All wheels must have the same size and type tires. Unequal tire sizes must not be used.
320 STARTING AND OPERATING Traction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability. To reduce this possibility, the following precautions should be observed: 1. Slow down during rainstorms or when the roads are slushy. 2. Slow down if road has standing water or puddles. 3.
STARTING AND OPERATING 321 Shallow Standing Water Although your vehicle is capable of driving through shallow standing water, consider the following before doing so: CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing water.
322 STARTING AND OPERATING WARNING! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes.
STARTING AND OPERATING 323 otherwise the load on the transmission locking mechanism may make it difficult to move the selector out of park. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. The foot operated parking brake is positioned below the lower left corner of the instrument panel. To apply the parking brake, push the parking brake pedal down and then remove your foot from the pedal.
324 STARTING AND OPERATING WARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in the ignition. A child could operate power windows, other controls, or move the vehicle. • Be sure the parking brake is fully disengaged before driving: failure to do so can lead to brake failure, and an accident.
STARTING AND OPERATING 325 Anti-Lock Brake System — If Equipped The Anti-Lock Brake System provides increased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to prevent wheel lock-up. ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can include ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops.
326 STARTING AND OPERATING WARNING! • The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability. Installation of such equipment should be performed by qualified professionals. • Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to an accident.
STARTING AND OPERATING 327 If both the Brake Warning Light and the ABS Light remain on, the Anti-Lock brakes (ABS) and Electronic Brake Force Distribution (EBD) systems are not functioning. Immediate repair to the ABS system is required. POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost.
328 STARTING AND OPERATING CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to the power steering pump may occur. MULTI DISPLACEMENT SYSTEM (MDS) — 5.7L Engine Only This feature offers improved fuel economy by shutting off four of the engine’s eight cylinders during light load and cruise conditions.
STARTING AND OPERATING 329 The TCS monitors the amount of wheel spin of each driven wheel. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. The ESP/TCS indicator light, located in the instrument cluster, starts to flash as soon as the tires lose traction and the ESP system becomes active. The indicator light also flashes when the TCS is active.
330 STARTING AND OPERATING Refer to “Electronic Stability Program (ESP)” in this section for additional system information and operating instructions. BRAKE ASSIST SYSTEM (BAS) — IF EQUIPPED WARNING! The BAS (Brake Assist System) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions.
STARTING AND OPERATING 331 ELECTRONIC STABILITY PROGRAM (ESP) — IF EQUIPPED WARNING! The ESP (Electronic Stability Program) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The ESP cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
332 STARTING AND OPERATING The ESP/TCS indicator light, located in the instrument cluster, starts to flash as soon as the tires lose traction and the ESP system becomes active. The indicator light also flashes when the TCS is active. If the indicator light begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. The ESP OFF button is located in the center of the instrument panel.
STARTING AND OPERATING 333 CAUTION! When the ESP/TCS indicator light is illuminated continuously, the ESP is switched off. Avoid spinning one drive wheel. This may cause serious damage to the drive train. CAUTION! If the vehicle is towed with the front axle raised, the engine must be shut off (key in the ignition switch to the LOCK or ACC position). Otherwise, the ESP will immediately be engaged and it will apply the rear wheel brakes.
334 STARTING AND OPERATING yellow ESP/TCS indicator light in the instrument cluster both come on when the ignition switch is turned to the “ON” position. They should go out with the engine running. TIRE SAFETY INFORMATION Tire Markings The system will turn the ESP/BAS malfunction indicator light on continuously while the engine running if it detects a malfunction in either the ESP or the BAS or both.
STARTING AND OPERATING 335 • European Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter ⬙P⬙ is absent from this tire size designation. Example: 215/65R15 96H • Temporary Spare tires are high-pressure compact spares designed for temporary emergency use only. Tires designed to this standard have the letter “T” molded into the sidewall preceding the size designation.
336 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....ⴖ = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm) 65 = Aspect Ratio in Percent (%) —Ratio of section height to section width of tire. 10.
STARTING AND OPERATING 337 EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be achieved under specified operating conditions (i.e. tire pressure, vehicle loading, road conditions, and posted speed limits).
338 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side then you will find it on the inboard side of the tire.
STARTING AND OPERATING 339 EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation —This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards, and is approved for highway use. MA = Code representing the tire manufacturing location. (2 digits) L9 = Code representing the tire size. (2 digits) ABCD = Code used by tire manufacturer. (1 to 4 digits) 03 = Number representing the week in which the tire was manufactured.
340 STARTING AND OPERATING Tire Loading and Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar.
STARTING AND OPERATING 341 3) the tire size designed for your vehicle 4) the cold tire inflation pressures for the front, rear, and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the “Tire and Loading Information” placard and in the “Vehicle Loading” section of this manual.
342 STARTING AND OPERATING passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (since 5 x 150 = 750, and 1400 – 750 = 650 lbs.) 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle.
STARTING AND OPERATING 343 5
344 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle. Three primary areas are affected by improper tire pressure: 1.
STARTING AND OPERATING 345 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Under inflation, also increases tire rolling resistance and results in higher fuel consumption. maximum loaded vehicle condition. These pressure conditions will be found in the “Supplemental Tire Pressure Information” section of this manual. 3.
346 STARTING AND OPERATING check tire pressure. Do not make a visual judgement when determining proper inflation. Radial tires may look properly inflated even when they are under inflated. CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.
STARTING AND OPERATING 347 Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle operation.
348 STARTING AND OPERATING Compact Spare Tire — If Equipped The compact spare is for temporary emergency use with radial tires. It is engineered to be used on your style vehicle only. Since this tire has limited tread life, the original tire should be repaired (or replaced) and reinstalled at the first opportunity. WARNING! Temporary use spare tires are for emergency use only. With these tires, do not drive more than 50 mph (80 km/h). Temporary-use spare tires have limited tread life.
STARTING AND OPERATING 349 original equipped tire on the front or rear axle of your vehicle, but it is not. Installation of this limited use spare tire affects vehicle handling. Since it is not the same tire, replace (or repair) the original tire and reinstall on the vehicle at the first opportunity. Tire Spinning When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck.
350 STARTING AND OPERATING Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 inch (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Many states have laws requiring tire replacement at this point.
STARTING AND OPERATING 351 WARNING! Tires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have an accident resulting in serious injury or death. Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease, and gasoline.
352 STARTING AND OPERATING WARNING! CAUTION! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have an accident resulting in serious injury or death.
STARTING AND OPERATING 353 Improper alignment will not cause vehicle vibration. Vibration may be a result of tire and wheel out-ofbalance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear. SELF-SEALING TIRES — IF EQUIPPED A non-hardening viscous sealant applied to the inner liner of each tire fills punctures up to 0.19 in. (5 mm) to minimize the loss of air pressure.
354 STARTING AND OPERATING NOTE: In order to avoid damage to tires, chains, and your vehicle do not drive for a prolonged period of time on dry pavement. Observe the tire chain manufacturer’s instructions on method of installation, operating speed, and conditions for usage. Always use the lower suggested operating speed if both the chain manufacturer and vehicle manufacture suggest a maximum speed. This notice applies to all chain traction devices, including link and cable (radial) chains.
STARTING AND OPERATING 355 Remember, more frequent rotation is permissible if desired. Also, correct for anything causing rapid or unusual wear prior to performing the tire rotation. The suggested rotation method is the “forward-cross” shown in the following diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED • The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure.
356 STARTING AND OPERATING pressure will also increase as the vehicle is driven - this is normal and there should be no adjustment for this increased pressure. • The TPM System will warn the driver of a low tire pressure if the tire pressure falls below the lowpressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire.
STARTING AND OPERATING 357 CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
358 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, and the TPMS will monitor the actual tire pressure in the tire. Base System — If Equipped The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the Receiver Module.
STARTING AND OPERATING 359 vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Check TPMS Warning If a system fault is detected, the Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds and then remain on solid. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists.
360 STARTING AND OPERATING NOTE: Vehicles with Compact Spare 1. The compact spare tire does not have a tire pressure monitoring sensor. Therefore, the TPMS will not monitor the pressure in the compact spare tire. 2. If you install the compact spare tire in place of a road tire that has a pressure below the low-pressure warning limit, upon the next ignition key cycle, a chime will sound and the TPM Telltale Light will turn ON. 3.
STARTING AND OPERATING 361 • 3 Trigger Modules (mounted in three of the four wheel-wells) • Various Tire Pressure Monitoring System Messages, which display in the Electronic Vehicle Information Center (EVIC) Electronic Vehicle Information Center (EVIC) will display one or more Low Pressure messages (Left Front, Left Rear, Right Front, Right Rear) for 3 seconds and a graphic showing the pressure values of each tire with the low tire pressure values flashing.
362 STARTING AND OPERATING the EVIC graphic) to the vehicle’s recommended cold placard pressure value. Once the system receives the updated tire pressures, the system will automatically update, the graphic display in the EVIC will stop flashing, and the Tire Pressure Monitoring Telltale Light will turn off. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information.
STARTING AND OPERATING 363 1. Signal interference due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors. 3. Accumulation of snow or ice around the wheels or wheel housings. upon the next ignition key cycle, a chime will sound and the TPM Telltale Light will turn ON. In addition, the EVIC will display a Low Pressure message and a graphic showing the low tire pressure value flashing. 3.
364 STARTING AND OPERATING Light will remain ON and a chime will sound. In addition, the graphic in the EVIC will still display a flashing pressure value. 3. After driving the vehicle for up to 10 minutes above 15 mph (25 km/h), the TPM Telltale Light will flash on and off for 75 seconds and then remain on solid. In addition, the EVIC will display a ⬙CHECK TPM SYSTEM⬙ message for 3 seconds and then display dashes (- -) in place of the pressure value. 4.
STARTING AND OPERATING 365 FUEL REQUIREMENTS 2.7L Engine The 2.7L engine is designed to meet all emissions regulations and provide excellent fuel economy and performance when using high quality unleaded “regular” gasoline having an octane rating of 87. The use of premium gasoline is not recommended. Under normal conditions, the use of premium gasoline will not provide a benefit over high quality regular gasolines, and in some circumstances may result in poorer performance. 3.5L and 5.7L Engines The 3.
366 STARTING AND OPERATING and durability for your vehicle. The manufacturer recommends the use of gasoline that meets the WWFC specifications if they are available. Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline.” Reformulated gasolines contain oxygenates, and are specifically blended to reduce vehicle emissions and improve air quality. The manufacturer supports the use of reformulated gasolines.
STARTING AND OPERATING 367 manufacturer. While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Methanol. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT. Gasoline blended with MMT reduces spark plug life and reduces emission system performance in some vehicles.
368 STARTING AND OPERATING • An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service. Contact your dealer for service assistance. • The use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentrations of methanol.
STARTING AND OPERATING 369 • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. • Keep the trunk closed when driving your vehicle to prevent carbon monoxide and other poisonous exhaust gases from entering the vehicle.
370 STARTING AND OPERATING NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinforcement. CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the Malfunction Indicator Light to turn on.
STARTING AND OPERATING 371 WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. NOTE: • Tighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is tightened properly.
372 STARTING AND OPERATING A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL). Refer to “Onboard Diagnostic System” in Section 7 of this manual for more information. VEHICLE LOADING The load carrying capacity of your vehicle is shown on the “Vehicle Certification Label.” This information should be used for passenger and luggage loading as indicated.
STARTING AND OPERATING 373 Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR. WARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have an accident.
374 STARTING AND OPERATING Loading To load your vehicle properly, first figure out its empty weight, axle by axle and side by side. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items securely before driving. If weighing the loaded vehicle shows that you have exceeded either GAWR, but the total load is within the specified GVWR, you must redistribute the weight.
STARTING AND OPERATING 375 EXAMPLE ONLY Empty Weight Load (Including driver, passengers, and cargo) Total GAWR Front Rear Axle Axle 2054 lbs 1805 lbs (932 kg) (819 kg ) 271 lbs 579 lbs (123 kg) (263 kg) 2325 lbs 2384 lbs (1055 kg) (1081 kg) 2546 lbs 2708 lbs (1155 kg) (1228 kg) NOTE: Refer to the “Vehicle Certification Label” attached to the rear of the driver’s door for your vehicle’s GVWR and GAWRs. This table is only an example.
376 STARTING AND OPERATING Gross Trailer Weight (GTW) The Gross Trailer Weight (GTW) is the weight of the trailer plus the weight of all cargo, consumables, and equipment (permanent or temporary) loaded in or on the trailer in its ⬙loaded and ready for operation⬙ condition. The recommended way to measure GTW is to put your fully loaded trailer on a vehicle scale. The entire weight of the trailer must be supported by the scale.
STARTING AND OPERATING 377 Frontal Area Frontal area is the maximum height and maximum width of the front of a trailer. Trailer Sway Control The trailer sway control is a telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable friction associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling.
378 STARTING AND OPERATING WARNING! • An improperly adjusted Weight Distributing Hitch system may reduce handling, stability, braking performance, and could result in an accident. • Weight Distributing Systems may not be compatible with Surge Brake Couplers. Consult with your hitch and trailer manufacturer or a reputable Recreational Vehicle dealer for additional information.
STARTING AND OPERATING 379 The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Refer to the “Trailer Towing Weights (Maximum Trailer Weight Ratings)” chart for the Max. GTW towable for your given drivetrain.
380 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission 2.7L & 3.5L Rear Wheel Drive (RWD) Automatic Frontal Area 22 SQ. FT. (2.04 square meters) 22 SQ. FT. (2.04 square meters) 22 SQ. FT. (2.04 square meters) 22 SQ. FT. (2.04 square meters) Max. GTW (Gross Trailer Wt.
STARTING AND OPERATING 381 Engine/Transmission Frontal Area 32 SQ. FT. (2.97 square meters) 32 SQ. FT. (2.97 square meters) 32 SQ. FT. (2.97 square meters) 32 SQ. FT. (2.97 square meters) Refer to local laws for maximum trailer towing speeds. 3.5L All Wheel Drive (AWD) & 5.7L Automatic NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and it should never exceed the weight referenced on the “Tire and Loading Information” placard.
382 STARTING AND OPERATING which will cause loss of control of the vehicle and trailer. Failure to load trailers heavier in front is the cause of many trailer accidents. Never exceed the maximum tongue weight stamped on your bumper or trailer hitch. Consider the following items when computing the weight on the rear axle of the vehicle: • The tongue weight of the trailer. • The weight of any other type of cargo or equipment put in or on your vehicle. • The weight of the driver and all passengers.
STARTING AND OPERATING 383 Towing Requirements To promote proper break-in of your new vehicle drivetrain components the following guidelines are recommended: CAUTION! • Avoid towing a trailer for the first 500 miles (805 km) of vehicle operation. Doing so may damage your vehicle. • During the first 500 miles (805 km) of trailer towing, limit your speed to 50 mph (80 km/h). Perform the maintenance listed in Section 8 of this manual. When towing a trailer, never exceed the GAWR, or GCWR, ratings.
384 STARTING AND OPERATING • Safety chains must always be used between your vehicle and trailer. Always connect the chains to the frame or hook retainers of the vehicle hitch. Cross the chains under the trailer tongue and allow enough slack for turning corners. • Vehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. Put the tow vehicle automatic transmission in P for Park. Always, block or ⬙chock⬙ the trailer wheels. • GCWR must not be exceeded.
STARTING AND OPERATING 385 − Check for signs of tire wear or visible tire damage before towing a trailer. Refer to “Tires–General Information” in this section for information on tread wear indicators and for the proper inspection procedure. − When replacing tires, refer to “Tires–General Information” in this section for information on replacement tires and for the proper tire replacement procedures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s GVWR and GAWR limits.
386 STARTING AND OPERATING WARNING! Do not connect trailer brakes to your vehicle’s hydraulic brake lines. It can overload your brake system and cause it to fail. You might not have brakes when you need them and could have an accident. Towing any trailer will increase your stopping distance. When towing, you should allow for additional space between your vehicle and the vehicle in front of you. Failure to do so could result in an accident.
STARTING AND OPERATING 387 5 4 - Pin Connector 7 - Pin Connector
388 STARTING AND OPERATING Towing Tips Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away from heavy traffic. Towing Tips — Automatic Transmission The “D” range can be selected when towing. However, if frequent shifting occurs while in this range, the “3” range should be selected.
STARTING AND OPERATING 389 − Extended driving at high RPM should be avoided to prevent excess heat generation. A reduction in vehicle speed may be required to avoid extended driving at high RPM. Return to a higher gear range or vehicle speed when road conditions and RPM level allows.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flasher . . . . . . . . . . . . . . . . . . 392 䡵 Jump-Starting Procedures . . . . . . . . . . . . . . . . . 404 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . . 393 䡵 Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . . 407 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . . 394 䡵 Towing A Disabled Vehicle . . . . . . . . . . . . . . . . 408 ▫ Preparations For Jacking . . . . . . . . . . . . . . . .
392 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The hazard flasher switch is located in the center of the instrument panel between the center air outlets. To engage the Hazard Warning Flashers, depress the switch on the instrument panel. When the Hazard Warning is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Push the switch a second time to turn off the flashers.
WHAT TO DO IN EMERGENCIES 393 IF YOUR ENGINE OVERHEATS In any of the following situations, you can reduce the potential for overheating by taking the appropriate action. • On the highways — Slow down. • In city traffic — While stopped, put transmission in “N” (Neutral), but do not increase engine idle speed. NOTE: There are steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off.
394 WHAT TO DO IN EMERGENCIES WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7, Maintenance, of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph. JACKING AND TIRE CHANGING WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic.
WHAT TO DO IN EMERGENCIES 395 Preparations For Jacking 1. Park the vehicle on a firm level surface as far from the edge of the roadway as possible. Avoid icy or slippery areas. 2. Set the parking brake and place the gear selector in PARK. 3. Turn OFF the ignition. 4. Turn on the Hazard Warning Flasher. 6 Hazard Flasher Switch 5. Passengers should not remain in the vehicle when the vehicle is being jacked. 6. Block both the front and rear of the wheel diagonally opposite the jacking position.
396 WHAT TO DO IN EMERGENCIES Jack Location/Spare Tire Stowage The jack and spare tire are both stowed under an access cover in the trunk. Follow these steps to access the jack and spare tire. NOTE: The spare tire must be removed in order to access the jack. 1. Open the trunk. 2. Lift the access cover using the pull strap. Opening The Access Panel 3. Remove the fastener securing the spare tire.
WHAT TO DO IN EMERGENCIES 397 6 Spare Tire Fastener 4. Remove the spare tire. 5. Remove the fastener securing the jack.
398 WHAT TO DO IN EMERGENCIES WARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. 3. If equipped with steel wheels, do not remove the wheel cover at this time. If equipped with aluminum wheels where the center cap covers the lug nuts, use the lug wrench to pry the center cap off carefully before raising the vehicle. Jacking and Changing a Tire 1.
WHAT TO DO IN EMERGENCIES 399 WARNING! To avoid possible personal injury, handle the wheel covers with care to avoid contact with the metal edges and retention teeth. 4. Before raising the vehicle, use the lug wrench to loosen, but not remove, the lug nuts on the wheel with the flat tire. Turn the lug nuts counter-clockwise one turn while the wheel is still on the ground. 6 5. Place the jack underneath the lift area that is closest to the flat tire.
400 WHAT TO DO IN EMERGENCIES Jack Engagement Locations
WHAT TO DO IN EMERGENCIES 401 6. Raise the vehicle just enough to remove the flat tire and install the spare tire. WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 7. Remove the lug nuts, wheel cover (if equipped), and tire. Remove the cover by hand. Do not pry it off. 8. Mount the spare tire.
402 WHAT TO DO IN EMERGENCIES WARNING! WARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. The limited use spare tires are for emergency use only. Installation of this limited use spare tire affects vehicle handling. With this tire, do not drive more than 60 mph (100 km/h).
WHAT TO DO IN EMERGENCIES 403 1. Mount the road tire on the axle. For vehicles equipped with wheel covers, perform Steps 2 and 3. For vehicles equipped with center caps, proceed to Step 4. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle is lowered to the ground. 3. Align the valve notch in the wheel cover with the valve stem on the wheel. Install the cover by hand, snapping the cover over the two lug nuts.
404 WHAT TO DO IN EMERGENCIES correct tightness of each lug nut is 100 ft/lb. (135 N. m). If in doubt about the correct tightness, have them checked with a torque wrench by your dealer or at a service station. 7. For vehicles equipped with center caps, install the center cap by hand. Do not use a hammer or excessive force to install the center cap. 8. Stow the jack, tools, and spare tire. Make sure the base of the jack faces the rear of the vehicle before tightening down the fastener.
WHAT TO DO IN EMERGENCIES 405 NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals are located in the engine compartment for jump-starting. 3. Set the parking brake, place the automatic transmission in “P” (Park), and turn the ignition switch to the LOCK position on both vehicles. 1. Wear eye protection and remove any metal jewelry such as watchbands or bracelets that might make an inadvertent electrical contact. 4.
406 WHAT TO DO IN EMERGENCIES WARNING! • You should not try to start your vehicle by pushing or towing. • Do not connect the cable to the negative post of the discharge battery. The resulting electrical spark could cause the battery to explode. Jump-Starting • During cold weather when temperatures are below freezing point, electrolyte in a discharged battery may freeze. Do not attempt jump-starting because the battery could rupture or explode.
WHAT TO DO IN EMERGENCIES 407 NOTE: For vehicles equipped with ESP, refer to ⬙Synchronizing ESP⬙ under ⬙Electronic Stability Program⬙ in Section 5 of this manual if the ESP/BAS light (in the instrument cluster) remains on continuously after starting the engine of the vehicle with the discharged battery. 8. When removing the jumper cables, reverse the above sequence exactly. Be careful of the moving belts and fan. WARNING! Any procedure other than above could result in: 1.
408 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! • When “rocking” a stuck vehicle by moving between “First” and R (Reverse), do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone.
WHAT TO DO IN EMERGENCIES 409 TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat towing with all four wheels on the ground) Flat towing of vehicles equipped with an automatic transmission, is only permitted within the following limitations: With The Ignition Key Your vehicle may be towed under the following conditions: The gear selector must be in “N” (Neutral), the distance to be traveled must not exceed 30 miles (48 km), and the towing speed must not exceed 30 mph (48 km/h).
410 WHAT TO DO IN EMERGENCIES If you must use the accessories (wipers, defrosters, etc.) while being towed, the key must be in the ON position, not the ACC position. Make certain the transmission remains in “N” (Neutral). TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE WITH A TOW DOLLY The manufacture does not recommend that you tow this vehicle on a tow dolly. Vehicle damage may occur.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 2.7L Engine Compartment . . . . . . . . . . . . . . . . 414 䡵 Maintenance Procedures . . . . . . . . . . . . . . . . . . 420 䡵 3.5L Engine Compartment . . . . . . . . . . . . . . . . 415 ▫ Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 421 䡵 5.7L Engine Compartment . . . . . . . . . . . . . . . . 416 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . . 425 䡵 Onboard Diagnostic System — OBD II . . . . . . . .
412 MAINTAINING YOUR VEHICLE ▫ Air Conditioner Maintenance . . . . . . . . . . . . . 430 ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . . 441 ▫ A/C Air Filter — If Equipped . . . . . . . . . . . . 431 ▫ Automatic Transmission . . . . . . . . . . . . . . . . 444 ▫ Power Steering — Fluid Check . . . . . . . . . . . . 432 ▫ All Wheel Drive (AWD) — If Equipped . . . . . 445 ▫ Front & Rear Suspension Ball Joints . . . . . . . . 432 ▫ Front And Rear Wheel Bearings . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 413 ▫ Low Beam Headlight, High Beam Headlight, Park/Turn Light, Inner Park Light, And Outer Park Light – 300 Models . . . . . . . . . . . . 460 ▫ Low Beam Headlight, High Beam Headlight, And Park/Turn Light – 300C . . . . . . . . . . . . . 462 ▫ Backup Light, Side Marker Light, And Tail/ Stop Turn Light — 300 Models . . . . . . . . . . . . 465 ▫ License Light . . . . . . . . . . . . . . . . . . . . . . . . 472 䡵 Fluids And Capacities . . . . . . . . . . . . . . . . . . .
414 MAINTAINING YOUR VEHICLE 2.
MAINTAINING YOUR VEHICLE 415 3.
416 MAINTAINING YOUR VEHICLE 5.
MAINTAINING YOUR VEHICLE 417 ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
418 MAINTAINING YOUR VEHICLE odometer reset button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL). EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system. Failure to pass could prevent vehicle registration.
MAINTAINING YOUR VEHICLE 419 5. Approximately 15 seconds later, one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition key or start the engine. This means that your vehicle’s OBD system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and will remain fully illuminated until you turn off the ignition key or start the engine.
420 MAINTAINING YOUR VEHICLE DEALER SERVICE Your dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service Manuals are available which include detailed service information for your vehicle. Refer to these manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you.
MAINTAINING YOUR VEHICLE 421 These items should be inspected if a malfunction is observed or suspected. Engine Oil Checking Oil Level — 2.7L, 3.5L Engines To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off.
422 MAINTAINING YOUR VEHICLE Checking Oil Level — 5.7L Engine To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level readings. Maintain the oil level in the “SAFE” range. Adding 1.0 quart (1.
MAINTAINING YOUR VEHICLE 423 Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” in Section 8 of this manual for information on this system. NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or 6 months, whichever occurs first.
424 MAINTAINING YOUR VEHICLE The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to the “Engine Compartment” illustration in this section. The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to the “Engine Compartment” illustration in this section. NOTE: Vehicles equipped with a 5.7L engine must use SAE 5W-20 oil.
MAINTAINING YOUR VEHICLE 425 Disposing of Used Engine Oil and Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can present a problem to the environment. Contact your dealer, service station, or governmental agency for advice on how and where used oil and oil filters can be safely discarded in your area. Engine Oil Filter The engine oil filter should be replaced at every engine oil change.
426 MAINTAINING YOUR VEHICLE Spark Plugs Spark plugs must fire properly to assure engine performance and emission control. New plugs should be installed at the specified mileage. The entire set should be replaced if there is any malfunction due to a faulty spark plug. Malfunctioning spark plugs can damage the catalytic converter. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the proper type of spark plug for use in your vehicle.
MAINTAINING YOUR VEHICLE 427 Catalytic Converter The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emission control device. Under normal operating conditions, the catalytic converter will not require maintenance. However, it is important to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage.
428 MAINTAINING YOUR VEHICLE WARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situations involving grossly malfunctioning engine operation, a scorching odor may indicate severe and abnormal catalyst overheating.
MAINTAINING YOUR VEHICLE 429 WARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery. Don’t use a booster battery or any other booster source with an output greater than 12 volts.
430 MAINTAINING YOUR VEHICLE CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion.
MAINTAINING YOUR VEHICLE 431 WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the Warranty Information book for further warranty information. • The air conditioning system contains refrigerant under high pressure.
432 MAINTAINING YOUR VEHICLE Install new filter with arrows pointing in the direction of airflow, which is toward the rear of the vehicle (text and arrows on the filter indicate this). Refer to the “Maintenance Schedule” in Section 8 of this manual for the recommended air conditioning filter replacement intervals. Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not required.
MAINTAINING YOUR VEHICLE 433 Steering Linkage The tie rod end ball joints should be inspected for external leakage or damage when other maintenance is performed. Body Lubrication Locks and all body pivot points, including seat tracks, door hinges, trunk hinges, and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against rust and wear.
434 MAINTAINING YOUR VEHICLE Windshield Washers/Headlight Washers — If Equipped The windshield washer and the headlight washer (if equipped) share the same fluid reservoir. The fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water.
MAINTAINING YOUR VEHICLE 435 vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as required. WARNING! Exhaust gases can injure or kill.
436 MAINTAINING YOUR VEHICLE Coolant Checks Check engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable). If coolant is dirty or rusty in appearance, the system should be drained, flushed, and refilled with fresh coolant. Check the front of the A/C condenser for any accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden hose vertically down the face of the condenser.
MAINTAINING YOUR VEHICLE 437 CAUTION! • Mixing of coolants other than specified HOAT engine coolants, may result in engine damage and may decrease corrosion protection. If a non-HOAT coolant is introduced into the cooling system in an emergency, it should be replaced with the specified coolant as soon as possible. • Do not use plain water alone or alcohol-base engine coolant (antifreeze) products.
438 MAINTAINING YOUR VEHICLE • Use only high purity water such as distilled or deionized water when mixing the water/engine coolant solution. The use of lower quality water will reduce the amount of corrosion protection in the engine cooling system. Please note that it is the owner’s responsibility to maintain the proper level of protection against freezing according to the temperatures occurring in the area where the vehicle is operated.
MAINTAINING YOUR VEHICLE 439 Disposal of Used Coolant Used ethylene glycol based engine coolant is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by animals or children, do not store ethylene glycol based engine coolant in open containers or allow it to remain in puddles on the ground. If ingested by a child, contact a physician immediately. Clean up any ground spills immediately.
440 MAINTAINING YOUR VEHICLE • Do not overfill the coolant recovery bottle. • Check coolant freeze point in the radiator and in the coolant recovery bottle. If antifreeze needs to be added, contents of coolant recovery bottle must also be protected against freezing. • If frequent coolant additions are required, or if the level in the coolant recovery bottle does not drop when the engine cools, the cooling system should be pressure tested for leaks.
MAINTAINING YOUR VEHICLE 441 Insure nylon tubing in these areas has not melted or collapsed. Inspect all hose connections such as clamps and couplings to make sure they are secure and no leaks are present. Components should be replaced immediately if there is any evidence of wear or damage that could cause failure.
442 MAINTAINING YOUR VEHICLE Brake and Power Steering Hoses When the vehicle is serviced for scheduled maintenance, inspect surface of hoses and nylon tubing for evidence of heat and mechanical damage. Hard and brittle rubber, cracking, tears, cuts, abrasion, and excessive swelling indicate deterioration of the rubber. Particular attention should be made to examining those hose surfaces nearest to high heat sources, such as the exhaust manifold.
MAINTAINING YOUR VEHICLE 443 Master Cylinder - Brake Fluid Level Check Check the fluid level in the master cylinder immediately if the brake system warning light indicates system failure. Check the fluid level in the master cylinder when performing underhood services. Clean the top of the master cylinder area before removing the cap. Add fluid to bring the level up to the top of the “FULL” mark on the side of the master cylinder reservoir.
444 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! Do not allow petroleum-base fluid to contaminate the brake fluid. Seal damage may result. • Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will result in more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and Genuine Parts” for the correct fluid type.
MAINTAINING YOUR VEHICLE 445 Fluid and Filter Changes Refer to the “Maintenance Schedule” in Section 8 of this manual for the recommended transmission fluid and filter change intervals. If the transmission is disassembled for any reason, the fluid and filter should be changed. Special Additives Automatic Transmission Fluid (ATF) is an engineered product and its performance may be impaired by supplemental additives. Therefore, do not add any fluid additives to the transmission.
446 MAINTAINING YOUR VEHICLE Fluid Changes Refer to the “Maintenance Schedule” in Section 8 of this manual for the recommended transfer case fluid change intervals. Front and Rear Wheel Bearings Front and rear wheel bearings are permanently sealed. No regular maintenance is required for these components. Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion Vehicle body care requirements vary according to geographic locations and usage.
MAINTAINING YOUR VEHICLE 447 Washing • Wash your vehicle regularly. Always wash your vehicle in the shade using Mopar威 Car Wash or a mild car wash soap, and rinse the panels completely with clear water. • If insects, tar, or other similar deposits have accumulated on your vehicle, use Mopar威 Super Kleen Bug and Tar Remover to remove. • Use Mopar威 Cleaner Wax to remove road film, stains and to protect your paint finish. Take care never to scratch the paint.
448 MAINTAINING YOUR VEHICLE • If your vehicle is damaged due to an accident or similar cause, which destroys the paint and protective coating, have your vehicle repaired as soon as possible. The cost of such repairs is considered the responsibility of the owner. • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel.
MAINTAINING YOUR VEHICLE 449 Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and Mopar威 Total Clean or equivalent. Care should be taken to avoid soaking your leather upholstery with any liquid.
450 MAINTAINING YOUR VEHICLE quarter window equipped with the radio antenna. Do not use scrapers or other sharp instruments, which may scratch the elements. When cleaning the rear view mirror, spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirror. Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1.
MAINTAINING YOUR VEHICLE 451 FUSES (POWER DISTRIBUTION CENTERS) Cavity Fuses (Front Power Distribution Center) A power distribution center is located in the engine compartment. This center contains fuses and relays.
452 MAINTAINING YOUR VEHICLE Cavity 10 11 12 13 14 15 16 17 Cartridge Fuse 30 Amp Pink 30 Amp Pink Mini Fuse Description Cavity — Windshield Wiper — Anti-lock Brakes System (ABS) Valves - if equipped Radiator Fan 18 19 20 21 22 40 Amp — Green 50 Amp — Red 60 Amp Yellow 50 Amp Red — — — Anti-lock Brakes System (ABS) Pump Motor - if equipped Radiator Fan — Radiator Fan — — — — Cartridge Fuse — — — — — Mini Fuse Description — — — — — — — — — —
MAINTAINING YOUR VEHICLE 453 CAUTION! • When installing the Power Distribution Center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Power Distribution Center, and possibly result in an electrical system failure. Fuses (Rear Power Distribution Center) There is also a power distribution center located in the trunk under the spare tire access panel. This center contains fuses and relays.
454 MAINTAINING YOUR VEHICLE Cavity 6 Cartridge Fuse 40 Amp Green — 40 Amp Green 30 Amp Pink — 7 — 8 — 2 3 4 5 Rear Power Distribution Center Cavity 1 CarMini tridge Fuse Fuse 60 Amp — Yellow Description Ignition Off Draw (IOD) Mini Fuse — Description Integrated Power Module (IPM) — — — Integrated Power Module (IPM) — Heated Seats - if equipped 20 Amp Fuel Pump Yellow 15 Amp Rear Heated Seats - if Blue equipped 15 Amp Diagnostic Link ConnecBlue tor (DLC)/Wireless Control Module (WCM)/ Wirel
MAINTAINING YOUR VEHICLE 455 Cavity 9 Cartridge Fuse — 10 11 * 12 * 13 * 14 — — — — — 15 — 16 17 — — Mini Fuse Description Cavity 20 Amp Yellow — — — — 10 Amp Red Power Outlet 18 Cartridge Fuse — — — — — AC Heater Control/ Cluster/Security Module - if equipped 20 Amp Trailer Tow Brake ModYellow ule - if equipped — — 20 Amp Cluster Yellow 19 — 20 21 22 23 24 25 26 27 — — — — — — — — 28 — Mini Fuse Description 20 Amp Yellow 10 Amp Red — — — — — — — 10 Amp Red 10 Amp Red Selectable P
456 MAINTAINING YOUR VEHICLE Cavity 29 Cartridge Fuse — 30 — 31 32 33 34 — — — — Mini Fuse 5 Amp Orange Description Adaptive Cruise Control (ACC) - if equipped/ Cluster/Electronic Stability Program (ESP) - if equipped/Powertrain Control Module (PCM)/ Stop Light Switch 10 Amp Door Modules/Power Red Mirrors/Steering Control Module (SCM) — — — — — — — — Cavity 35 Cartridge Fuse — 36 — 37 — 38 — Mini Fuse 5 Amp Orange Description Antenna Module - if equipped/Power Mirrors/Rain Sensor - if
MAINTAINING YOUR VEHICLE 457 Cavity 39 40 41 42 43 Cartridge Fuse — Mini Fuse 10 Amp Red 5 Amp Orange Description Heated Mirrors - if equipped — Auto Inside Rearview Mirror - if equipped/ Heated Seats - if equipped/Switch Bank — 10 Amp AC Heater Control/ Red Headlights/Park Assist if equipped/Tire Pressure Monitoring - if equipped 30 Amp — Front Blower Motor Pink 30 Amp — Rear Window Defroster Pink Cavity 44 CarMini tridge Fuse Fuse 20 Amp — Blue Description Amplifier - if equipped/ Sunroof - i
458 MAINTAINING YOUR VEHICLE CAUTION! • When installing the Power Distribution Center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Power Distribution Center, and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
MAINTAINING YOUR VEHICLE 459 REPLACEMENT BULBS LIGHT BULBS — Interior Bulb Number Rear Courtesy/Reading Lights. . . . . . . . . . . . . . W5W Rear Compartment (Trunk) Light . . . . . . . . . . . . . 579 Overhead Console Reading Lights. . . . . . . . . . . . . 578 Visor Vanity Lights . . . . . . . . . . . . . . . . . . . . . A6220 Glove Box Light . . . . . . . . . . . . . . . . . . . . . . . . . 194 Door Courtesy . . . . . . . . . . . . . . . . . . . . . . . . . . 562 Shift Indicator Light . . . . . . . . .
460 MAINTAINING YOUR VEHICLE LIGHT BULBS — Exterior (300C Models) Bulb Number Low Beam Headlight (Standard Halogen). . . . . 9006XS Low Beam Headlight – High Intensity Discharge (HID) . . . . . . . . . . . . . . . . . . D1S (Serviced at Dealer) High Beam Headlight. . . . . . . . . . . . . . . . . . . . . 9005 Front Park/Turn Light . . . . . . . . . . . . . . . . . . 3157AK Front Fog Light. . . . . . . . 9145/H10 (Serviced at Dealer) Front Sidemarker . . . . . . . . .
MAINTAINING YOUR VEHICLE 461 1 — High Beam Headlight Bulb 2 — Low Beam Headlight Bulb 3 — Park/Turn Light Bulb 7
462 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Low Beam Headlight, High Beam Headlight, and Park/Turn Light – 300C 4 — Inner Park Light Bulb 5 — Outer Park Light Bulb High Intensity Discharge Headlights (HID) — If Equipped The headlights are a type of high voltage discharge tube.
MAINTAINING YOUR VEHICLE 463 WARNING! A transient high tension occurs at the bulb sockets of High Intensity Discharge (HID) headlights when the headlight switch is turned ON. It may cause serious electrical shock or electrocution if not serviced properly. See your authorized dealer for service. NOTE: On vehicles equipped with High Intensity Discharge Headlights (HID), when the headlights are turned on, there is a blue hue to the lights.
464 MAINTAINING YOUR VEHICLE 1 — Low Beam Headlight Bulb 2 — High Beam Headlight Bulb 3 — Park/Turn Light Bulb CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol.
MAINTAINING YOUR VEHICLE 465 Backup Light, Side Marker Light, and Tail/Stop Turn Light — 300 Models 4. Remove the remaining fastener from the back of the tail light assembly. 1. Open the Trunk. 5. Push the electrical connector locking tab to the side. 2. Remove two fasteners from the back of the tail light assembly. 6. Disconnect the electrical connector. 7 3. Pull back the trunk liner. 7. Pull the tail light assembly clear from the vehicle to access the bulbs.
466 MAINTAINING YOUR VEHICLE 8. Turn the appropriate bulb and socket assembly counter-clockwise to remove it from the tail light assembly.
MAINTAINING YOUR VEHICLE 467 10. Reinstall the bulb and socket assembly into the tail light assembly, and then turn it clockwise. 11. Reinstall the tail light assembly, fasteners, electrical connector, and trunk liner. 12. Close the trunk. 3 — Tail/Stop/Turn Light Bulb 9. Disconnect the bulb from the socket assembly and install the replacement bulb.
468 MAINTAINING YOUR VEHICLE Tail/Stop, Tail, Turn Signal Light, and Backup Light — 300C Models 4. Remove the remaining fastener from the back of the tail light assembly. 1. Open the Trunk. 5. Push the electrical connector locking tab to the side. 2. Remove two fasteners from the back of the tail light assembly. 6. Disconnect the electrical connector. 3. Pull back the trunk liner.
MAINTAINING YOUR VEHICLE 469 7. Pull the tail light assembly clear from the vehicle to access the bulbs. Turn bulb sockets counter-clockwise to remove. 8. Turn the appropriate bulb and socket assembly counter-clockwise to remove it from the tail light assembly.
470 MAINTAINING YOUR VEHICLE 2 — Tail Light Bulb 3 — Turn Signal Light Bulb
MAINTAINING YOUR VEHICLE 471 10. Reinstall the bulb and socket assembly into the tail light assembly, and then turn it clockwise. 11. Reinstall the tail light assembly, fasteners, electrical connector, and trunk liner. 12. Close the trunk. 4 — Backup Light Bulb 9. Disconnect the bulb from the socket assembly and install the replacement bulb.
472 MAINTAINING YOUR VEHICLE License Light 1. Remove the screws securing the light to the rear fascia. 2. Remove the bulb and socket assembly. 3. Disconnect the bulb from the socket assembly and install the replacement bulb. 1 — License Light Bulb 2 — Socket 4. Reinstall the bulb and socket assembly. 5. Reattach the light to the rear fascia, and then install the screws.
MAINTAINING YOUR VEHICLE 473 FLUIDS AND CAPACITIES Fuel (approximate) 2.7 Liter Engine 3.5 Liter Engine without All Wheel Drive 3.5 Liter Engine with All Wheel Drive 5.7 Liter Engine Engine Oil-With Filter 2.7 Liter Engine (SAE 5W-20, API Certified) 3.5 Liter Engine (SAE 10W-30, API Certified) 5.7 Liter Engine (SAE 5W-20, API Certified) Cooling System * 2.7 Liter Engine (Mopar威 Antifreeze/Coolant 5 Year/100,000 Mile Formula) or equivalent. 3.
474 MAINTAINING YOUR VEHICLE Fuel (approximate) 3.5 Liter Engine with All Wheel Drive (Mopar威 Antifreeze/ Coolant 5 Year/100,000 Mile Formula) or equivalent. 5.7 Liter Engine without Severe Duty II Cooling System (Mopar威 Antifreeze/Coolant 5 Year/100,000 Mile Formula) or equivalent. 5.7 Liter Engine with Severe Duty II Cooling System (Mopar威 Antifreeze/Coolant 5 Year/100,000 Mile Formula) or equivalent. * Includes heater and coolant recovery bottle filled to MAX level. U.S. Metric 11.4 qts 10.
MAINTAINING YOUR VEHICLE 475 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil (2.7 Liter) Engine Oil (3.5 Liter) Engine Oil (5.7 Liter) Spark Plugs (2.7L) Spark Plugs (3.5L) Spark Plugs (5.7L) Oil Filter (2.7 Liter) Fluids, Lubricants, and Genuine Parts Mopar威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent Use API Certified SAE 5W-20 Engine Oil meeting the requirements of DaimlerChrysler Material Standard MS-6395.
476 MAINTAINING YOUR VEHICLE Component Oil Filter (3.5 Liter) Oil Filter (5.7 Liter) Fuel Selection (2.7 Liter) Fuel Selection (3.5 Liter) Fuel Selection (5.7 Liter) Fluids, Lubricants, and Genuine Parts Mopar威 05281090 or equivalent. Mopar威 05281090 or equivalent.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance . . . . . . . . 478 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . . 478 ▫ Required Maintenance Intervals . . . . . . . . . . .
M A I N T E N A N C E 478 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
MAINTENANCE SCHEDULES 479 M if it has been 6 months since your last oil change even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10,000 km) or 6 months, whichever comes first. Your dealer will reset the oil change indicator message after completing the scheduled oil change.
M A I N T E N A N C E S C H E D U L E S 8 480 MAINTENANCE SCHEDULES • Check all lights and other electrical items for correct operation. At Each Oil Change • Change the engine oil filter. • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle.
MAINTENANCE SCHEDULES 481 M Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Change the engine oil and engine oil filter. Rotate the tires. If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. Inspect the brake linings, and replace if necessary. Replace the air conditioning filter (if equipped). Inspect the rear axle fluid. Inspect the CV joints.
M 482 MAINTENANCE SCHEDULES A I N T E N Maintenance Items A N Inspect the transfer case fluid — All Wheel Drive C (AWD). E Replace the spark plugs on 5.7L engines. S C H E D U L E S 8 Change the rear axle fluid if using your vehicle for any of the following: police, taxi, fleet, off-road, or frequent trailer towing. Change the automatic transmission fluid & filter if using your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing.
MAINTENANCE SCHEDULES 483 M Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Replace the timing belt on 3.5L engines. Change the automatic transmission fluid & filter. Replace the accessory drive belt on 2.7L engines. WARNING! You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486 ▫ Prepare For The Appointment . . . . . . . . . . . . 486 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 486 䡵 Reporting Safety Defects . . . . . . . . . . . . . . . . . . 489 ▫ In Canada . . . . . . . . . . . . . . . . . . . . . . . . . . 490 䡵 Publication Order Forms . . . . . . . . . . . . . . . . . .
486 IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty, discuss additional charges with the service manager. Keep a maintenance log of your vehicle’s service history. This can often provide a clue to the current problem.
IF YOU NEED CONSUMER ASSISTANCE 487 technicians, special tools, and the latest information to assure your vehicle is fixed correctly and in a timely manner. This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance.
488 IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its Customer Center. Any hearing or speech impaired customer who has access to a TDD or a conventional teletypewriter (TTY) in the United States can communicate with the manufacturer by dialing 1–800–380–CHRY.
IF YOU NEED CONSUMER ASSISTANCE 489 WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. WARRANTY INFORMATION (U.S.
490 IF YOU NEED CONSUMER ASSISTANCE To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), or go to http://www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. You can also obtain other information about motor vehicle safety from http:// www.safercar.gov. In Canada: If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately.
IF YOU NEED CONSUMER ASSISTANCE 491 • Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix problems on computercontrolled vehicle systems and features. They show exactly how to find and correct problems the first time, using step-by-step troubleshooting and driveability procedures, proven diagnostic tests and a complete list of all tools and equipment. • Owner’s Manuals.
492 IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories established by the National highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car. All Passenger Car Tires Must Conform to Federal Safety Requirements in Addition to These Grades.
IF YOU NEED CONSUMER ASSISTANCE 493 Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
496 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . 322,324 ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . 325 Adaptive Cruise Control (ACC) (Cruise Control) . . 152 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 437 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 369 Adding Washer Fluid . . . . . . . . . . . . . . . 141,143,434 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 367 Adjustable Pedals . . . . . . . . . . . . . . . . . . . .
INDEX 497 Audio Systems (Radio) . . . . . . . . . . . . . . . . . 234,252 Auto Down Power Windows . . . . . . . . . . . . . . . . 36 Auto Unlock, Doors . . . . . . . . . . . . . . . . . . . . . . . 32 Auto Up Power Windows . . . . . . . . . . . . . . . . . . 37 Automatic Dimming Mirror . . . . . . . . . . . . . . . . . 86 Automatic Door Locks . . . . . . . . . . . . . . . . . . . 31,32 Automatic Headlights . . . . . . . . . . . . . . . . . . . . 131 Automatic Oil Change Indicator . . . . . . . . . .
498 INDEX Body Mechanism Lubrication . . . . . . . . . . . . . . . 433 B-Pillar Location . . . . . . . . . . . . . . . . . . . . . . . . 340 Brake Assist System . . . . . . . . . . . . . . . . . . . . . . 330 Brake Control System, Electronic . . . . . . . . . . . . . 330 Brake Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476 Brake, Parking . . . . . . . . . . . . . . . . . . . . . . . . . . 322 Brake System . . . . . . . . . . . . . . . . . . . . . . . . 324,441 Anti-Lock (ABS) . . . . . .
INDEX 499 Checks, Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Child Restraint . . . . . . . . . . . . . . . . . . 67,68,69,72,74 Child Restraint Tether Anchors . . . . . . . . . . . . . 71,72 Child Safety Locks . . . . . . . . . . . . . . . . . . . . . . . . 33 Clean Air Gasoline . . . . . . . . . . . . . . . . . . . . . . . 366 Cleaning Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448 Windshield Wiper Blades . . . . . . . . . . . . . . . . . 433 Climate Control . .
500 INDEX Selection of Coolant (Antifreeze) . . . . . . 436,473,475 Corrosion Protection . . . . . . . . . . . . . . . . . . . . . 446 Cruise Control (Speed Control) . . . . . . . . . . . 148,152 Cruise Light . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 Cup Holder . . . . . . . . . . . . . . . . . . . . . . . . . 189,450 Customer Assistance . . . . . . . . . . . . . . . . . . . . . 486 Customer Programmable Features . . . . . . . . . . . . 227 Data Recorder, Event . . . . . . . . . . . . . . .
INDEX 501 Electrical Power Outlets . . . . . . . . . . . . . . . . . . . 187 Electronic Brake Control System Brake Assist System . . . . . . . . . . . . . . . . . . . . 330 Electronic Stability Program . . . . . . . . . . . . . . . 331 Traction Control System . . . . . . . . . . . . . . . . . 328 Electronic Power Distribution Center (Fuses) . . . . 451 Electronic Speed Control (Cruise Control) . . . . 148,152 Electronic Stability Program (ESP) . . . . . . . . . . . .
502 INDEX Oil Filter Disposal . . . . . . . . . . . . . . . . . . . . . . 425 Oil Selection . . . . . . . . . . . . . . . . . . . . . . . 423,473 Oil Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . 424 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Overheating . . . . . . . . . . . . . . . . . . . . . . . . . . 393 Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299 Temperature Gauge . . . . . . . . . . . . . . . . . . . . . 207 Engine Oil Viscosity . .
INDEX 503 Cooling System . . . . . . . . . . . . . . . . . . . . . . . 436 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . 421,422 Power Steering . . . . . . . . . . . . . . . . . . . . . . . . 432 Transfer Case . . . . . . . . . . . . . . . . . . . . . . . . . 445 Fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475 Fluids, Lubricants and Genuine Parts . . . . . . . . . . 475 Fog Lights . . . . . . . . . . . . . . . . . . . . . . . . . . 134,202 Folding Rear Seat . . . . .
504 INDEX Gasoline, Reformulated . . . . . . . . . . . . . . . . . . . 366 Gauges Coolant Temperature . . . . . . . . . . . . . . . . . . . . 207 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 Speedometer . . . . . . . . . . . . . . . . . . . . . . . . . 202 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . 204 Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . 307,313 General Information . .
INDEX 505 Heated Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282 Heater, Engine Block . . . . . . . . . . . . . . . . . . . . . 303 High Beam/Low Beam Select (Dimmer) Switch . . 136 Hitches Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . 379 Holder, Coin . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Holder, Cup . . . . . . . . . . . . . . . . . . . . . . . . . . .
506 INDEX Key, Sentry (Immobilizer) Key-In Reminder . . . . . . Keyless Entry System . . . Keys . . . . . . . . . . . . . . Knee Bolster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 15 20 12 52 Lane Change and Turn Signals . . . . . . . . . . . . . . 135 Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . .
INDEX 507 Headlights On With Wipers . . . . . . . . . . . . 132,139 High Beam . . . . . . . . . . . . . . . . . . . . . . . . 136,208 High Beam Indicator . . . . . . . . . . . . . . . . . . . . 208 High Beam/Low Beam Select . . . . . . . . . . . . . 136 Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . . 20 Instrument Cluster . . . . . . . . . . . . . . . . . . 130,202 Intensity Control . . . . . . . . . . . . . . . . . . . . . . . 137 Interior . . . . . . . . . . . . . . . . . . . . . . . . .
508 INDEX Low Tire Pressure System . . . . . . . . . . . . . . . . . Lower Anchors and Tether for CHildren (LATCH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lubrication, Body . . . . . . . . . . . . . . . . . . . . . . Lumbar Support . . . . . . . . . . . . . . . . . . . . . . . . 355 71,72 . 433 . 119 Maintenance Free Battery . . . . . . . . . . . . . . . . . . 428 Maintenance, General . . . . . . . . . . . . . . . . . . . . . 420 Maintenance Procedures . . . . . . . . . . . . . . . . . .
INDEX 509 Navigation Radio . . . . . . . . . . . . . . . . . . . . . . . . 252 Navigation System . . . . . . . . . . . . . . . . . . . . . . . 252 New Vehicle Break-In Period . . . . . . . . . . . . . . . . 76 Occupant Restraints . . . . . . . . . . . . . . . . . . . . . . . 42 Octane Rating, Gasoline (Fuel) . . . . . . . . . . . . 365,475 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . 202,208 Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202,208 Oil Change Indicator . . . .
510 INDEX Parking On Hill . . . . . . . . . . . . . . . . . . . . . . . . . 322 Passing Light . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Pedals, Adjustable . . . . . . . . . . . . . . . . . . . . . . . 147 Personal Settings . . . . . . . . . . . . . . . . . . . . . . . . 227 Pets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Phone, Cellular . . . . . . . . . . . . . . . . . . . . 91,252,253 Phone, Hands-Free (UConnect™) . . . . . . . .
INDEX 511 Radio Remote Controls . . . . . . . . . . . . . . . . . . . . 279 Radio, Satellite . . . . . . . . . . . . . . . . . 234,252,253,268 Radio (Sound Systems) . . . . . . . . . . . . . . . . . 234,252 Rain Sensitive Wiper System . . . . . . . . . . . . . . . . 140 Rear Cup Holder . . . . . . . . . . . . . . . . . . . . . . . . 189 Rear Park Sense System . . . . . . . . . . . . . . . . . . . 172 Rear Seat, Folding . . . . . . . . . . . . . . . . . . . . . . . 123 Rear Wheel Bearings . . . . . . . . .
512 INDEX Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . 79 Safety Checks Outside Vehicle . . . . . . . . . . . . . . . 79 Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 489 Safety, Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . 78 Safety Information, Tire . . . . . . . . . . . . . . . . . . . 334 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Satellite Radio . . . . . . . . . . . . . . . . . . 234,252,253,268 Satellite Radio Antenna . . .
INDEX 513 Selection of Oil . . . . . . . . . . . . . . . . . . . . . . . . . 423 Self-Sealing Tires . . . . . . . . . . . . . . . . . . . . . . . . 353 Sentry Key (Immobilizer) . . . . . . . . . . . . . . . . . . . 15 Sentry Key Programming . . . . . . . . . . . . . . . . . . . 17 Sentry Key Replacement . . . . . . . . . . . . . . . . . . . 16 Service Assistance . . . . . . . . . . . . . . . . . . . . . . . 486 Service Contract . . . . . . . . . . . . . . . . . . . . . . . . .
514 INDEX Starting and Operating . . . . . . . . . . . . . . . . . . . . 299 Starting Procedures . . . . . . . . . . . . . . . . . . . . . . 299 Steering Column Controls . . . . . . . . . . . . . . . . . . . . . . 134 Column Lock . . . . . . . . . . . . . . . . . . . . . . . . . 144 Linkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . 327,432 Tilt Column . . . . . . . . . . . . . . . . . . . . . . . 144,145 Wheel, Tilt . . . . . .
INDEX 515 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79,344,492 Aging (Life of Tires) . . . . . . . . . . . . . . . . . . . . 350 Air Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . 344 Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . 352 Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353 Changing . . . . . . . . . . . . . . . . . . . . . . . . . 394,398 Compact Spare . . . . . . . . . . . . . . . . . . . . . . . . 348 Flat Changing . . . .
516 INDEX Traction Control Light . . . . . . . . . . . . . . . . . . . . 328 Traction Control Switch . . . . . . . . . . . . . . . . . . . 328 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . 375 Cooling System Tips . . . . . . . . . . . . . . . . . . . . 389 Hitches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379 Minimum Requirements . . . . . . . . . . . . . . . . . 383 Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388 Trailer and Tongue Weight . . .
INDEX 517 Universal Transmitter . . . . . . . . . . . . . . . . . . . . . 177 Unleaded Gasoline . . . . . . . . . . . . . . . . . . . . . . . 365 Untwisting Procedure, Seat Belt . . . . . . . . . . . . . . 48 USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . 234,252 Vacuum/Vapor Harnesses . . . . . . . . . . . . . . . . . 440 Vanity Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Variance, Compass . . . . . . . . . . . . . . . . . . . . . . . 223 Vehicle Certification Label .
518 INDEX Windshield Defroster . . . . . . . . . . . . . . . . 79,283,289 Windshield Washers . . . . . . . . . . . . . . . . . . . 138,139 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 434 Windshield Wiper Blades . . . . . . . . . . . . . . . . . . 433 Windshield Wipers . . . . . . . . . . . . . . . . . . . . . . . 138 Wiper Blade Replacement . . . . . . . . . . . . . . . . . . 433 Wiper, Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Wipers, Intermittent . . . . . .
2008 300 2008 OWNER’ S MANUAL 81-026-0843 First Edition Printed in U.S.A.
