TABLE OF CONTENTS SECTION PAGE .............................................................3 1 1 INTRODUCTION 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4 UNDERSTANDING YOUR INSTRUMENT PANEL 5 STARTING AND OPERATING 6 WHAT TO DO IN EMERGENCIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .349 6 7 MAINTAINING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS m Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 m Vehicle Identification Number . . . . . . . . . . . . . . . 6 m How To Use This Manual . . . . . . . . . . . . . . . . . . 4 m Vehicle Modifications/Alterations . . . . . . . . . . . . 7 m Warnings And Cautions . . . . . . . . . . . . . . . . . . .
INTRODUCTION INTRODUCTION This manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a Warranty Information Booklet and various customer oriented documents. You are urged to read these publications carefully. Following the instructions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle.
INTRODUCTION 5 1
INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures, which could result in an accident or bodily injury. It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS m A Word About Your Keys . . . . . . . . . . . . . . . . . .12 m Sentry Key — If Equipped . . . . . . . . . . . . . . . . .15 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . .12 ▫ Replacement Keys . . . . . . . . . . . . . . . . . . . . . .16 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . .14 ▫ Customer Key Programming . . . . . . . . . . . . . .17 ▫ Locking Doors With The Key . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE m Illuminated Entry System . . . . . . . . . . . . . . . . . .20 m Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 m Remote Keyless Entry . . . . . . . . . . . . . . . . . . . . .20 ▫ Power Windows . . . . . . . . . . . . . . . . . . . . . . .32 ▫ To Unlock The Doors And Liftgate . . . . . . . . . .21 m Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 ▫ To Lock The Doors And Liftgate . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Seat Belt Extender . . . . . . . . . . . . . . . . . . . . . .49 m Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 ▫ Driver And Front Passenger Supplemental Restraint System - Airbag . . . . . . . . . . . . . . . .50 ▫ Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . . . .78 ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . .65 ▫ Child Restraint . . . . . . . . . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer. Ask your dealer for these numbers and keep them in a safe place. Three Button Key Ignition Key Removal Automatic Transaxle Place the shift lever in PARK.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If you try to remove the key before you place the lever in PARK, the key may become trapped temporarily in the ignition cylinder. If this occurs, rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safety feature is inoperable. The engine can be started and stopped but the key cannot be removed until you obtain service.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key-In-Ignition Reminder A chime will sound (reminding you to remove the key) when the driver’s door opens and the key is in the ’OFF’ or ’ACC’ positions. The chime will not sound with the key in the ’ON’ position. Locking Doors With The Key You can insert the key with either side up. To lock the door, turn the key rearward, to unlock the door, turn the key forward. See Section 7 of this manual for door lock lubrication.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Transaxle Ignition Interlock System This system prevents the key from being removed unless the shift lever is in PARK. It also prevents shifting out of PARK unless the key is in the ACC, or ON positions, and the brake pedal is depressed. SENTRY KEY — IF EQUIPPED The Sentry Key Immobilizer System prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • The Sentry Key Immobilizer System is not compatible with remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. • Exxon/Mobil Speed Pass,™ additional Sentry Keys, or any other transponder equipped components on the same keychain will not cause a key-related (transponder) fault unless the additional part is physically held against the ignition key being used when starting the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: When having the Sentry Key Immobilizer System serviced, bring all vehicle keys with you to the dealer. Customer Key Programming You can program new sentry keys to the system if you have two valid sentry keys by performing the following procedure: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch lock cylinder key code. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interference that may cause undesired operation. SECURITY ALARM SYSTEM — IF EQUIPPED This system monitors the vehicle doors and ignition for unauthorized operation.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the SECURITY light stays on continuously during vehicle operation, have the system checked by your dealer. To Disarm the System: Use the Keyless Entry transmitter to unlock the door. If something has triggered the system in your absence, the horn will sound three times when you unlock the doors and the security lamp will flash for 30 seconds. Check the vehicle for tampering.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ILLUMINATED ENTRY SYSTEM The courtesy lights will turn on when you use the keyless entry transmitter or open the doors. The lights will fade to off after about 30 seconds or they will immediately fade to off once the ignition switch is turned on. NOTE: • The front courtesy overhead console, door courtesy and liftgate lights do not turn on if the dimmer control is in the interior lights ON position (extreme top position).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 Remote Unlock Driver’s Door 1st The system can be programmed to unlock all the doors or driver’s door only upon the first UNLOCK button press by using the following procedure: • On electronic vehicle information center (EVIC) equipped vehicles refer to “Remote Unlock Driver’s Door 1st?” under “Use Factory Settings?” in the EVIC section of this manual.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. This will allow you to unlock all doors on the first press of the UNLOCK button. 5. To reactivate the feature, repeat this procedure. 6. If the programming procedure was unsuccessful see your authorized dealer for programming assistance. To lock the doors and liftgate: Press and release the LOCK button on the transmitter to lock all doors. If the ignition is OFF, when the doors are locked, the parking lights will flash on once and the horn will chirp once.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Open/Close Power Liftgate — If Equipped Press the LIFTGATE button twice within five seconds to open/close the power liftgate. The liftgate will beep for 2 seconds and then open/close. If the button is pushed while the liftgate is being power closed, the liftgate will reverse to the full open position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using The Panic Alarm: To activate the Panic mode while the ignition is OFF press and release the PANIC button on the transmitter once. When the Panic mode is activated, the interior lights will illuminate, the headlamps and parking lights will flash, and the horn will sound. To cancel the Panic mode press and release the PANIC button on the transmitter a second time.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. Separating Transmitter Halves 2. Remove and replace the battery. Avoid touching the new battery with your fingers.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS Manual Door Locks Lock the doors by pushing up on the lock knob on each door trim panel. If the lock knob is up when you shut the door, the door will lock. Therefore, make sure the keys are not inside the vehicle before closing the door. WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks A power door lock switch is located on each front door trim panel. Use this switch to lock or unlock all doors and liftgate. 27 locks will not operate. This prevents you from accidentally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate. A chime will sound if the key is in the ignition and a door is open, as a reminder to remove the key.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If desired, the “Auto Door Locks?” feature can be turned on or off by using the following procedure: • On electronic vehicle information center (EVIC) equipped vehicles refer to “Auto Door Locks?” under “Use Factory Settings?” in the EVIC section of this manual. 4. Within 15 seconds cycle the key from the LOCK position to the ON/RUN position a minimum of four times; ending in the LOCK position (Do not start the engine). 5.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 This feature will not operate if there is any manual operation of the power door locks (Lock or Unlock). If desired, the “Auto Unlock On Exit?” feature can be turned on or off by using the following procedure: 4. Within 15 seconds, cycle the key from the LOCK position to the ON/RUN position a minimum of four times ending in the LOCK position (do not start the engine).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Protection Door Lock To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with a child protection door lock system. NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position. To Engage the Child Protection Door Lock 1. Open the rear door. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: For emergency exit with the system engaged, move the door lock knob to the UNLOCK position, roll down the window and open the door with the outside door handle. WARNING! Avoid trapping anyone in the vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. 31 To Disengage the Child Protection Door Lock 1. Open the rear door. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS Power Windows The window controls on the driver’s door control all the door windows. The switches will operate only when the ignition switch is in the ON or ACCESSORY position or during accessory delay. The window lock switch on the driver’s door allows you to disable the window controls on the passenger doors. When the lock switch is pressed the window controls on the passenger doors will not illuminate and the passenger windows will be disabled.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The time is customer programmable through the Electronic Vehicle Information Center (EVIC). Refer to “Power Accessory Delay?” under “Personal Settings (Customer Programmable Features)” in Section 4 of this manual for details. Auto Up Feature with Anti–Pinch Protection Lift the window switch to the second detent, release, and the window will go up automatically.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Pull the window switch up to close window completely and continue to hold the switch up for an additional two seconds after the window is closed. 2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 the liftgate. The emergency liftgate latch release can be accessed through a snap-in cover located on the liftgate trim panel. • If the liftgate is locked and is not equipped with a powered liftgate, pressing the button on the remote keyless entry transmitter will result in the liftgate becoming unlocked for 30 seconds allowing you to manually access the liftgate area. The liftgate will re-lock automatically within 10 seconds once the liftgate is closed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The power liftgate may also be opened by pressing the button located on the overhead console. the liftgate is opening or closing. A beeping signal will sound two seconds before the liftgate starts to open or close. WARNING! During power operation, personal injury or cargo damage may occur. Ensure the liftgate travel path is clear. Make sure the liftgate is closed and latched before driving away.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 • There are also pinch sensors attached to the side of the liftgate. Light pressure anywhere along these strips will cause the liftgate to return to the open position. (62° C). Be sure to remove any build-up of snow or ice from the liftgate before pressing any of the power liftgate switches. • The liftgate must be in the full open position in order to power close.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Gas props support the liftgate in the open position. However, because the gas pressure drops with temperature, it may be necessary to assist the props when opening the liftgate in cold weather. If your vehicle is equipped with the Occupant Classification System (OCS) there will be a Passenger Airbag Disabled (PAD) Indicator Light located on the center of the instrument panel.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The front airbags have a multi stage inflator design. This allows the airbag to have different rates of inflation that are based on collision severity. Please pay close attention to the information in this section. It tells you how to use your restraint system properly to keep you and your passengers as safe as possible. WARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE normal conditions. But in a collision, the belt will lock and reduce the risk of your striking the inside of the vehicle or being thrown out. WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2 2. The seat belt latch plate is near the seatback of the front seats and next to your arm in the rear seats. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click”. WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. 43 WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! Adjustable Upper Shoulder Belt Anchorage In the front seats, the shoulder belt anchorage can be adjusted upward or downward to help position the belt away from your neck.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you’ll prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position. 45 2 Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180° to create a fold that begins immediately above the latch plate. Grasp and Twist 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. Slide the latch plate upward over the folded webbing 4. Continue to slide the latch plate up until it clears the folded webbing.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Pretensioners The seat belt assemblies for both front seating positions are equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision. These devices improve the performance of the seat belt by assuring that the belt is tight about the occupant early in a collision. Pretensioners are designed to work for all size occupants.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or RUN position. DaimlerChrysler does not recommend deactivating the Enhanced Warning System (BeltAlert). 1. Turn the ignition switch to the OFF position, and buckle the driver’s seat belt. 2. Turn the ignition switch to the RUN position (engine does not need to be running), and wait for the Seat Belt Warning Light to turn off. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic-Locking Retractor (ALR) The center seating position on vehicles equipped with a second row bench seat is equipped with an AutomaticLocking Retractor (ALR). Pull the belt from the retractor until there is enough to allow you to pass through the child restraint and slide the latch plate into the buckle. Then pull on the belt until it is all removed from the retractor.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed. Driver and Front Passenger Supplemental Restraint System - Airbag This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 Also, the front passenger airbag is certified to the Federal regulations that define Occupant Restraint Controller (ORC) system. 2 This vehicle may also be equipped with a driver inflatable knee blocker located on the instrument panel below the steering column. This vehicle may also be equipped with left and right side curtain airbags to protect the driver and passengers sitting next to a window.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Do not put anything on or around the airbag covers or attempt to manually open them. You may damage the airbags and you could be injured because the airbags are not there to protect you. These protective covers for the airbag cushions are designed to open only when the airbags are inflating.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some simple steps you can take to minimize the risk of harm from a deploying airbag. 1. Children 12 years old and under should ride buckled up in the rear seat. 2. Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger front airbag. An airbag deployment could cause severe injury or death to infants in that position. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly. In some collisions the airbags won’t deploy at all. Always wear your seat belts even though you have airbags. • Being too close to the steering wheel or instrument panel during front airbag deployment could cause serious injury. Airbags need room to inflate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Knee Impact Bolster • Front Seat Belt Pretensioners • Front Passenger Seat Occupant Classification System (OCS) — If OCS Equipped − Occupant Classification Module − Passenger Airbag Disabled (PAD) Indicator Light − Interconnecting Wiring − Bladder Assembly − Belt Tension Sensor How The Airbag System Works • The Occupant Restraint Controller (ORC) determines if a frontal collision is severe enough to require the airbags to inflate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE detects a malfunction in any part of the system, it turns on the AIRBAG warning light either momentarily or continuously. A single chime will sound if the light comes on again after initial start up. WARNING! Ignoring the AIRBAG warning light in your instrument panel could mean you won’t have the airbags to protect you in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE inflate, it signals the inflators on the crash side of the vehicle. A quantity of nontoxic gas is generated to inflate the window bag. The inflating window bag pushes the outside edge of the headliner out of the way and covers the window.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE another object in the vehicle (i.e. feet on the dashboard), the OCS may not be able to properly approximate occupant size. Furthermore, the occupant size may appear to increase or decrease due to objects hanging on the seat, other passengers pushing on the seat, or objects lodged underneath the seat. If there is a fault present in the system, the AIRBAG warning light will illuminate indicating that you should take the vehicle to an authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 passenger is properly positioned or not. If the PAD indicator light comes on when an adult is in the passenger seat, have the passenger re-position themselves in the seat until the light goes out. Remember, if the PAD indicator light is illuminated the passenger front airbag will not inflate. For properly installed child restraint systems and children properly seated on the front passenger seat, the airbag will be disabled.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE front passenger airbag is allowed. If a fault is present, the AIRBAG warning light is illuminated. • The Passenger Airbag Disabled (PAD) Indicator Light — If Equipped indicates to the driver and passenger when the airbag is turned OFF in the presence of a properly seated occupant. When the PAD indicator light is illuminated, the airbag is OFF.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Unapproved modifications or service procedures to the front passenger seat assembly, its related components, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is involved in an accident. A modified vehicle may not comply with required Federal Motor Vehicle Safety Standards (FMVSS).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If A Deployment Occurs The airbag system is designed to deploy the airbags when the ORC and impact sensors detect a moderate-tosevere collision, to help restrain the vehicle passengers, and then immediately deflate. NOTE: A collision that is not severe enough to need airbag protection will not activate the system. This does not mean something is wrong with the airbag system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Deployed airbags, front seat belt pretensioners and driver inflatable knee blocker cannot protect you in another collision. Have the airbags, front seat belt pretensioners and driver inflatable knee blocker (if equipped) replaced by an authorized dealer as soon as possible.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. You could be injured because the airbags are not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right side of the instrument panel. Do not modify the front bumper, vehicle body structure, or frame.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The AIRBAG light does not come on or flickers during the 6 to 8 seconds when the ignition switch is first turned on. • The light remains on or flickers after the 6 to 8 second interval. • The light flickers or comes on and remains on while driving.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In the event that an investigation is undertaken by DaimlerChrysler Corporation (regardless of initiative), the company or its designated representative will first obtain permission of the appropriate custodial entity for the vehicle (usually the vehicle owner or lessee) before accessing the electronic data stored, unless ordered to download data by a court with legal jurisdiction (i.e., pursuant to a warrant).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Airbag deployment level (if applicable) • Impact acceleration and angle • Seatbelt status • Brake status (service and parking brakes) • Accelerator status (including vehicle speed) • Engine control status (including engine speed) • Transmission gear selection • Cruise control status • Traction/stability control status • Tire pressure monitoring system status – If Equipped 67 Child Restraint Everyone in your vehicle needs to be buckled up at all times — babies
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, an unrestrained child, even a tiny baby, can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper restraint for the child’s size.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Older Children and Child Restraints Children who weigh more than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing direction are for children who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year. These child seats are also held in the vehicle by the lap/shoulder belt or the LATCH child restraint anchorage system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. • A rearward facing child restraint should only be used in a rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle end of the belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Six passenger vehicles are equipped with second row fold & tumble seats with lower anchorages that can accommodate rigid mount or flexible webbing-mounted LATCH-compatible child seats. The third row seating positions are not equipped with lower anchorages. However, the third row driver side seating position is equipped with a tether anchor.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 also accommodate a flexible webbing-mounted LATCHcompatible child seat by using the inboard lower anchors of the two outboard seating positions. A rigid mount seat can only be installed at this seating location by using the vehicle’s seat belt. Regardless of the specific type of lower attachment, NEVER install LATCH-compatible child seats such that two child seats share a common lower anchorage.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE convenient. When using the LATCH System, always follow the child restraint manufacturer’s installation instructions. NOTE: If your child restraint seat is not LATCH compatible, install the restraint using the vehicle seat belts. Tether Anchors There are tether strap anchorages behind all second row seating positions and for six passenger vehicles on the driver’s side third row seating position. The tether anchors are located in the rear surface of the seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 2 Bench Seat Tether Anchors 3RD ROW TETHER ANCHOR When the tether anchorage is used in the third row seating position, the strap should be positioned straight over the top of the seatback. Installing A Child Restraint We urge that you carefully follow the directions of the manufacturer when installing your child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE strap. Forward-facing toddler restraints and some rearward-facing infant restraints will also be equipped with a tether strap, a hook and means for adjusting the tension in the strap. In general, you will first loosen the adjusters on the lower straps and tether straps so that you can more easily attach the hook or connector to the lower anchorages and tether anchorages.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle. Not all child restraint systems will be installed as we have described here. Again, carefully follow the instructions that come with the child restraint system. WARNING! Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The engine oil installed in the engine at the factory is a high quality energy conserving type lubricant. Oil changes should be consistent with anticipated climate conditions under which vehicle operations will occur. The recommended viscosity and quality grades are shown in Section 7 of this manual. NON-DETERGENT OR STRAIGHT MINERAL OILS MUST NEVER BE USED. A new engine may consume some oil during its first few thousand miles (kilometers) of operation.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! If you are required to drive with the deck lid / liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode. Safety Checks You Should Make Inside The Vehicle Seat Belts Inspect the belt system periodically, checking for cuts, frays and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside The Vehicle Tires Examine tires for excessive tread wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect tread and sidewall for cuts or cracks. Check wheel nuts for tightness, and tires (including spare) for proper pressure. Lights Have someone observe the operation of exterior lights while you work the controls.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS m Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 ▫ Inside Day / Night Mirror . . . . . . . . . . . . . . . .86 ▫ Automatic Dimming Mirror — If Equipped . . . .86 ▫ Driver’s Side Outside Mirror Auto Dimmer — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .87 ▫ Exterior Mirrors Folding Feature . . . . . . . . . . .87 ▫ Outside Mirror — Driver’s Side . . . . . . . . . . . .87 ▫ Outside Mirror — Passenger’s Side . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Things You Should Know About Your UConnect™ System . . . . . . . . . . . . . . . . . . . . 106 ▫ Second Row Bench Seating — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 122 ▫ General Information . . . . . . . . . . . . . . . . . . . 114 ▫ Second Row Fold & Tumble Seats — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 123 m Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 m Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 ▫ Passing Light . . . . . . . . . . . . . . . . . . . . . . . . 139 ▫ Overhead Console Map/Reading Lights . . . . . 134 m Windshield Wipers And Washers . . . . . . . . . . . 140 ▫ Interior Lights . . . . . . . . . . . . . . . . . . . . . . . 135 ▫ Windshield Washers . . . . . . . . . . . . . . . . . . . 140 ▫ Multi-Function Lever . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ To Vary The Speed Setting . . . . . . . . . . . . . . . 145 ▫ Traction Control System (TCS) . . . . . . . . . . . . 154 ▫ To Accelerate For Passing . . . . . . . . . . . . . . . 146 ▫ Brake Assist System (BAS) . . . . . . . . . . . . . . . 154 m Garage Door Opener — If Equipped . . . . . . . . . 146 ▫ ESP (Electronic Stability Program) . . . . . . . . . 155 ▫ Programming HomeLinkt . . . . . . . . . . . . . . . 147 m Adjustable Pedals — If Equipped . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 ▫ Courtesy/Reading Lights . . . . . . . . . . . . . . . . 168 ▫ Second Row Seat Cupholders . . . . . . . . . . . . . 174 ▫ Sunglasses Storage . . . . . . . . . . . . . . . . . . . . 168 ▫ Third Row Seat Cupholders — If Equipped . . . 175 m Power Sunroof — If Equipped . . . . . . . . . . . . . 169 m Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 ▫ Express Open Feature . . . . . . . . . . . . . . . . . . 170 ▫ Console Features . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day / Night Mirror Adjust the mirror to center on the view through the rear window. A two point pivot system allows for horizontal and vertical adjustment of the mirror. MANUAL REARVIEW MIRROR Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle). The mirror should be adjusted while set in the day position (toward windshield).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 Driver’s Side Outside Mirror Auto Dimmer — If Equipped This mirror automatically adjusts for annoying headlight glare from vehicles behind you. You can turn this feature on or off by pressing the button at the base of the Rearview Mirror. Exterior Mirrors Folding Feature All exterior mirrors are hinged and may be moved either forward or rearward to resist damage. The hinges have three detent positions; full forward, full rearward, and normal.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirror — Passenger’s Side Adjust the convex outside mirror so you can just see the side of your vehicle in the portion of the mirror closest to the vehicle. This type of mirror will give a much wider view to the rear, and especially of the lane next to your vehicle. Power Remote-Control Mirrors Use the mirror select switch, located on the driver’s door trim panel above the power window switches, to adjust the view obtained in the outside mirrors.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 Press the rocker switch to the L or R for Left or Right mirror selection. Use the center off position to guard against accidentally moving a mirror position. Sun Visor Extension The sun visors may be pulled out to provide extended coverage of the side glass. Select a mirror and press one of the four arrows for the direction you want the mirror to move.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE UConnect™ allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle, and enables you to mute the system’s microphone for private conversation. The UConnect™ phonebook enables you to store up to 32 names and four numbers per name. Each language has a separate 32-name phonebook accessible only in that language. This system is driven through your Bluetooth™ Hands-Free profile cellular phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE enable you to access the system. Actual button location may vary with radio. The individual buttons are described in the “Operations” section. The UConnect™ system can be used with any HandsFree Profile certified Bluetooth™ cellular phone. See www.chrysler.com/uconnect for supported phones. If your cellular phone supports a different profile (e.g., Headset Profile), you may not be able to use any UConnect™ features.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE example, you can use the combined form voice command 9Phonebook New Entry,9 or you can break the combined form command into two voice commands: 9Phonebook9 and 9New Entry.9 Please remember, the UConnect™ system works best when you talk in a normal conversational tone, as if speaking to some one sitting eight feet away from you. Voice Command Tree Refer to “Voice Tree” at the end of this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The following are general phone to UConnect™ System pairing instructions: • Press the ’Phone’ button to begin. • After the 9Ready9 prompt and the following beep, say 9Setup Phone Pairing9 and follow the audible prompts. • When prompted, after the voice on beep, say 9Pair a Phone9 and follow the audible prompts. • You will be asked to say a four-digit pin number, which you will later need to enter into your cellular. You can enter any four-digit pin number.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • System will prompt you to say the number you want call. • System will prompt you to say the name of the person you want call. • For example, you can say 9234-567-8901.9 The phone number that you enter must be of valid length and combination. Based on the country in which the vehicle was purchased, the UConnect™ limits the user from dialing invalid combination of numbers.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the 9Ready9 prompt and the following beep, say 9Phonebook New Entry.9 • When prompted, say the name of the new entry. Use of long names helps the voice recognition and is recommended. For example, say 9Robert Smith9 or 9Robert9 instead of 9Bob.9 • When prompted, enter the number designation (e.g., 9Home,9 9Work,9 9Mobile,9 or 9Pager9). This will allow you to store multiple numbers for each phonebook entry, if desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, recite the new phone number for the phonebook entry that you are editing. • After the 9Ready9 prompt and the following beep, say 9Phonebook Delete.9 After you are finished editing an entry in the phonebook, you will be given the opportunities to edit another entry in the phonebook, call the number you just edited, or return to the main menu.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE After confirmation, the phonebook entries will be deleted. Note that only the phonebook in the current language is deleted. Delete All Entries in the UConnect™ Phonebook • Press the ’Phone’ button to begin. • After the 9Ready9 prompt and the following beep, say 9Phonebook Erase All.9 97 List All Names in the UConnect™ Phonebook • Press the ’Phone’ button to begin. • After the 9Ready9 prompt and the following beep, say 9Phonebook List Names.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Phone Call Features The following features can be accessed through the UConnect™ system if the feature(s) are available on your cellular service plan. For example, if your cellular service plan provides three-way calling, this feature can be accessed through the UConnect™ system. Check with your cellular service provider for the features that you have.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE second call is in progress. To go back to the first call, refer to 9Toggling Between Calls.9 To combine two calls, refer to 9Conference Call.9 Place/Retrieve a Call from Hold To put a call on hold, press the 8Phone’ button until you hear a single beep. This indicates that the call is on hold. To bring the call back from hold, press and hold the 8Phone’ button until you hear a single beep.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Redial • Press the ’Phone’ button to begin. • After the 9Ready9 prompt and the following beep, say 9Redial.9 until the vehicle battery condition dictates cessation of the call on the UConnect™ system and transfer of the call to the mobile phone. • The UConnect™ system will call the last number that was dialed on your cellular phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • After the 9Ready9 prompt and the following beep, say the name of the language you wish to switch to (English, Espanol, or Francais, if so equipped). If the phone is not reachable and the UConnect™ system is operational, you may reach the emergency number as follows: • Continue to follow the system prompts to complete language selection. • Press the ’Phone’ button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE emergency situations when the cell phone has network coverage and stays paired to the UConnect™ system. Towing Assistance If you need towing assistance, • Press the ’Phone’ button to begin. Paging To learn how to page, refer to 9Working with Automated Systems.9 Paging works properly except for pagers of certain companies which time-out a little too soon to work properly with the UConnect™ system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 When calling a number with your UConnect™ system that normally requires you to enter in a touch-tone sequence on your cellular phone keypad, you can push the ’Voice Recognition’ button and say the sequence you wish to enter followed by the word 9Send.9 For example, if required to enter your pin number followed with a pound 3 7 4 6 #, you can press the ’Voice Recognition’ button and say 93 7 4 6 # Send.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dialing Using the Cellular Phone Keypad You can dial a phone number with your cellular phone keypad and still use the UConnect™ system (while dialing via the cell phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired Bluetooth™ cellular phone, the audio will be played through your vehicle’s audio system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Advanced Phone Connectivity List Paired Cellular Phone Names Transfer Call to and from Cellular Phone The UConnect™ system allows on going calls to be transferred from your cellular phone to the UConnect™ system without terminating the call. To transfer an ongoing call from your UConnect™ paired cellular phone to the UConnect™ system or vice-versa, press the ’Voice Recognition’ button and say 9Transfer Call.9 • Press the ’Phone’ button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Press the ’Phone’ button to begin. • After the 9Ready9 prompt and the following beep, say 9Setup Select Phone9 and follow the prompts. • You can also press the 8Voice Recognition’ button anytime while the list is being played, and then choose the phone that you wish to select. • The selected phone will be used for the next phone call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Press the ‘Voice Recognition’ button and say 9Setup, Voice Training9 command. Repeat the words and phrases when prompted by the UConnect™ system. For best results, the Voice Training session should be completed when the vehicle is parked, engine running, all windows closed, and the blower fan switched off. This procedure may be repeated with a new user. The system will adapt to the last trained voice only.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When navigating through an automated system, such as voice mail, or when sending a page at the end of speaking the digit string, make sure to say 9send.9 • Storing names in phonebook when vehicle is not in motion is recommended. • It is not recommended to store similar sounding names in the UConnect™ phonebook. • UConnect™ phonebook nametag recognition rate is optimized for the voice of the person who stored the name in the phonebook.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Bluetooth Communication Link Occasionally, Cellular phones have been found to lose connection to the UConnect™ system. When this happens, the connection can generally be re-established by switching the phone off/on. Your cell phone is recommended to remain in Bluetooth 9on9 mode. 109 Power-Up After switching the ignition key from OFF to either ON or ACC position, or after a reset, you must wait at least five (5) seconds prior to using the system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary Zero One Two Three Four Five Six Seven Eight Nine Star (*) Plus (+) Pound (#) Add Location All North American English Alternate(s) Oh Add New All of them North American English Call Cancel Confirmation Prompts Continue Delete Dial Edit Emergency English Erase All Espanol Francais Help Home Language List names 113 3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE North American English List phones Mobile Mute Mute off New entry No Pager Pair a phone Phone pairing Pairing Phonebook Phone book Previous Record again Redial Return to main menu Return. Main menu Select phone Select Send North American English Phone settings / Phone set up Towing assistance Transfer call Try again Work Yes Set up General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 SEATS 10–Way Driver’s Power Seat — If Equipped The driver’s power seat switches are located on the driver’s front door trim panel. The bottom switch controls up/down, forward/rearward, and tilt adjustment. The top switch controls the seatback recline adjustment and the middle switch controls the lumbar adjustment.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Adjust the seat only while the vehicle is parked. Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. 8–Way Driver’s Power Seat — If Equipped The driver’s power seat switches are located on the driver’s front door trim panel. The bottom switch controls up/down, forward/rearward, and tilt adjustment.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjustable Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Pull up or push down on the head restraint so that the upper edge is as high as practical. To raise the head restraint, pull up on the head restraint. To lower the head restraint, depress the release tab located at the base of the head restraint and push down on the head restraint.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Seats — If Equipped This feature heats the driver, front passenger and second row seats. The controls for the front heated seats are located on the door trim panel next to the power seat switches. Front Heated Seat Switch Press the switch once to select a heat setting (high or low) and press the switch a second time in the same direction to turn the heated seat off. The indicator light will show when LOW or HIGH heat is ON.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 NOTE: • If the lights in the second row heated seat switch begin to flash when the switch is pressed, it indicates that the heated seat is not functioning properly and that service is required. See your authorized dealer for service. • Once a heat setting is selected, heat will be felt within 2 to 3 minutes. • The heated seats will turn off when the ignition switch is turned to the OFF position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Second Row Manual Seat Recliner — If Equipped The recliner mechanism control is on the outboard side of the seat. To recline, lean forward slightly, lift the lever, then push back to the desired position and release the lever. Lean forward and lift the lever to return the seatback to its normal position. Using body pressure, lean forward and rearward on the seat to be sure the seatback has latched.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or fatally injured. Use the recliner only when the vehicle is parked. Second Row Manual Seat Adjuster — If Equipped The adjusting bar is located under the front of the seat. Pull the bar up and move the seat to the desired position. Release the bar to lock the seat into position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Adjust the seat only while the vehicle is parked. Adjusting a seat while the vehicle is moving is dangerous. The seat belt might not be properly adjusted and you could be injured. Second Row Bench Seating — If Equipped The second row seats may be used with either or both seatbacks folded forward for additional storage space. To fold the seat, remove any objects from in front of or on the seat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Be sure there is nothing in front of the second row seat cushion before folding it down. Damage to the seat may occur. 123 4. Pull up on the seatback release lever located on the outboard side of the seat labeled “1” and fold the seatback down. 3 Second Row Fold & Tumble Seats — If Equipped The second row seats can be folded and tumbled forward for easy access to the third seat or rear cargo area. To fold and tumble the seat, follow these steps: 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Pull up on the release handle labeled “2” and lift firmly to tumble the seat fully forward. If the seat contacts the rear of the front seat, move the front seat forward. To relatch the seat, tilt the seat rearward and push down firmly to engage the rear attachments. Then lift the seatback release lever labeled “1” and pull the seatback up to return it to its full upright position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 To fold and tumble the seat forward, follow these steps: 1. Pull up on the seatback release handle “1” located on the back of the seat to fold the seatback down. 3 Release Strap 2 Location Release Handle 1 Location 2. Pull the release strap “2” located at the bottom of the seat to lift and tumble the seat forward. To relatch the seat, tilt the seat rearward and push down firmly to engage the rear attachments.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Third Row Seating — If Equipped The third row seats may be used with either or both seatbacks folded forward for additional storage space. To fold the seat, remove any objects from in front of or on the seat. Then pull handle located on the seatback and push it forward. WARNING! Do not sit in the 3rd row seat with the second row seatbacks folded or with the second row seats folded and tumbled.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Not all head restraints in this vehicle are the same. Head restraints from one seating position should not be removed and installed in any other seating position. In a collision, serious injury or death may result if the proper head restraint is not installed on each seat. • The cargo area in the rear of the vehicle should not be used as a play area by children. They could be seriously injured in a collision.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull on the load floor strap and lift the panel from the driver’s second row seatback over the center console and onto the passenger second row seat. Plastic Grocery Bag Retainer Retainer hooks which will hold plastic grocery bag handles are built into the seatbacks of all front seats. The floor supports the partial weight of the bagged goods. Load Floor Panel NOTE: Be sure to reattach the strap to secure the load floor panel when not in use.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE DRIVER MEMORY SEAT — IF EQUIPPED If your vehicle is equipped with memory systems, your remote keyless entry transmitter or memory seat buttons on the driver’s door panel can be used to recall the driver’s seat, outside mirrors, adjustable pedals (if equipped) and radio station presets to saved positions. 129 The memory seat buttons located on the driver’s door will always recall stored settings.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Your vehicle has been delivered with two remote keyless entry transmitters. One or both transmitters can be linked to either memory position. Up to eight remote keyless entry transmitters can be used with your vehicle. The memory seat system can also accommodate up to eight transmitters linked to either of the two stored seat positions or any combination of the two positions. To Program Memory Seat Buttons & RKE Transmitters, Follow These Steps: 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Repeat the above steps for the second position using the other driver’s door numbered button and Remote Keyless Entry Transmitter. Each time the SET (S) button and a numbered button are pressed, you erase the old memory and store a new one. To Disable A Transmitter Link, Follow These Steps: 1. Turn the ignition switch to the ON position. 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Easy Exit Seat (Available with Memory Seat Only) This feature provides automatic driver’s seat positioning which will enhance driver mobility out of and into the vehicle. removed from the ignition switch. The seat will move forward to the memory/driving position when the key is placed into the ignition and turned out of the LOCK position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Tilt Mirrors in Reverse (Available with Memory Seat Only) — If Equipped This additional feature provides automatic outside mirror positioning which will aid the driver’s view of the ground rearward of the front doors. The outside mirrors will move slightly downward from the present position when the vehicle is shifted into the Reverse position. The outside mirrors will then return to the original position when the vehicle is shifted out of Reverse position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Next, push to the left the safety catch located under the front edge of the hood, near the center. cm (6 inches) and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. WARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. You could have a collision. Be sure all hood latches are fully latched before driving.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE OFF. The lights also turn on when a door is opened or the dimmer control is turned fully upward, past the second detent. 135 NOTE: The lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle. Interior Lights The interior lights come on when a door is opened.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Multi-Function Lever The Multi-Function Lever controls the operation of the headlights, parking lights, turn signals, headlight beam selection, instrument panel light dimming, interior lights, the passing lights, and fog lights. The lever is located on the left side of the steering column. Headlights, Parking Lights, Instrument Panel Lights Turn the end of the Multi-Function Lever to the first detent for parking light and instrument panel light operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Dome Light Position Rotate the dimmer control completely upward to the second detent to turn on the interior lights. The interior lights will remain on when the dimmer control is in this position. Parade Mode (Daytime Brightness Feature) Rotate the dimmer control upward to the first detent. This feature brightens the odometer and radio display when the parking lights or headlights are on during daylight conditions.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The engine must be running before the headlights will come ON in the Automatic mode. Daytime Running Lights (Canada Only) The high beam headlights will come on as Daytime Running Lights whenever the ignition switch is on, the headlights are off, and the parking brake is off. The headlight switch must be used for normal night time driving.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The fog lights will only operate with the headlights on low beam. Selecting high beam headlights will turn off the fog lights. Turn Signals Move the lever up or down to signal a right-hand or left-hand turn. The arrow on either side of the instrument cluster flashes to indicate the direction of the turn, and proper operation of the front and rear turn signal lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS The wipers and washers are operated by a switch on the control lever. The lever is located on the right side of the steering column. Rotate the end of the control lever to select the desired wiper speed. Windshield Washers To use the front washer, pull the lever toward you and hold while spray is desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Windshield Wiper Operation Rotate the end of the lever to the second detent for Low speed wiper operation, or to the third detent for High speed operation Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause between cycles, desirable. Rotate the end of the lever to the first detent position, then turn the end of the lever to select the desired delay interval.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE continue to operate as long as the lever is pressed. Upon release, the rear wiper will cycle two times before returning to the set position. Adding Washer Fluid The fluid reservoir for the windshield washers and the rear window washer is shared. It is located in the front of the engine compartment on the driver’s side and should be checked for fluid level at regular intervals.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT STEERING COLUMN To tilt the column, pull the lever, located behind the turn signal control, toward you and move the steering wheel up or down, as desired. Release the lever to lock the steering wheel firmly in place. Tilt Steering Column Control 143 WARNING! Tilting the steering column while the vehicle is moving is dangerous. Without a stable steering column, you could lose control of the vehicle and have an accident.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL When engaged, this device takes over the accelerator operation at speeds greater than 30 mph (50 km/h). The speed control switches are located on the steering wheel. To Activate: Push the “ON/OFF” button once and the CRUISE indicator located near the instrument cluster odometer will illuminate showing the electronic speed control system is on.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Set a Desired Speed: When the vehicle has reached the desired speed, press and release the “SET” button. Release the accelerator and the vehicle will operate at the selected speed. The CRUISE SET indicator located near the instrument cluster odometer will illuminate showing the electronic speed control is set.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Tapping the “COAST” button once will result in a 1 mph (2 km/h) speed decrease. Each time the button is tapped, speed decreases. To Accelerate For Passing: Depress the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. NOTE: The speed control system maintains speed up and down hills. A slight speed change on moderate hills is normal.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 WARNING! WARNING! Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people or pets are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety standards. This includes most garage door opener models manufactured after 1982.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE to HomeLinkt for more efficient training and accurate transmission of the radio-frequency signal. Then release both the HomeLinkt and hand-held transmitter buttons. Your vehicle should be parked outside of the garage while training. If the EVIC display states “DID NOT TRAIN” repeat Step 3. If the signal is too weak, replace the battery in the original hand-held transmitter. 1. Turn the ignition switch to the ON/RUN position. 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 If the red HomeLinkt indicator blinks rapidly for two seconds and then remains constant, continue with the next section: “Programing A Rolling Code.” NOTE: After training a HomeLinkt channel, if the garage door does not operate with HomeLinkt and the garage door opener was manufactured after 1995, the garage door opener may have a rolling code. If so, proceed to the heading “Programming A Rolling Code System.” 5.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 7. Return to the vehicle and press the programmed HomeLinkt button twice (holding the button for 2 seconds each time). If the device is plugged in and activates, programming is complete. If the device does not activate, press the button a third time (for 2 seconds) to complete the training. NOTE: If you are have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the Internet at www.HomeLink.com for information or assistance.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 flash, and the EVIC display in the cluster will change from “CHANNEL # TRAINING” to “CHANNEL # TRAINED.” Reprogramming a Single HomeLinkT Buttons To re-program a channel that has been previously trained, follow these steps: If you unplugged the device for training, plug it back in at this time. 1. Turn the ignition switch to the ON/RUN position. Then proceed with the remaining steps.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To do this, press and hold the two outside buttons for 20 seconds until the EVIC message states “CHANNELS CLEARED.” Note that all channels will be erased. Individual channels cannot be erased. The HomeLinkt Universal Transceiver is disabled when the Vehicle Theft Alarm is active. Troubleshooting Tips If you are having trouble programming HomeLinkt, here are some of the most common solutions: • Replace the battery in the original transmitter.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The term “IC” before the certification/registration number only signifies that Industry Canada technical specifications were met. ANTI-LOCK BRAKE SYSTEM (ABS) ABS aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressure to prevent wheel lockup and help avoid skidding on slippery surfaces during braking. NOTE: ABS improves steering control of the vehicle during hard braking maneuvers.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC BRAKE CONTROL SYSTEM ABS/TCS/BAS/ESP Your vehicle is equipped with the advanced electronic brake control system that includes Anti-Lock Brake System (ABS), Traction Control System (TCS) Brake Assist System (BAS), and Electronic Stability Program (ESP). All four systems work together to enhance vehicle stability and control in various driving conditions, and are commonly referred to as ESP.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The BAS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ESP/TCS Indicator Light The “ESP/TCS Indicator Light” located in the instrument cluster, starts to flash as soon as the tires lose traction and the ESP system becomes active. The “ESP/TCS Indicator Light” also flashes when TCS is active. If the “ESP/TCS Indicator Light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 ESP Operating Modes The ESP system has 2 available operating modes. ESP ON This is the normal operating mode for ESP. Whenever the vehicle is started the ESP system will be in this mode. This mode should be used for most driving situations. ESP should only be turned to “Partial ESP” for specific reasons as noted below. 3 Traction Control Switch PARTIAL ESP This mode is entered by momentarily depressing the “ESP OFF” button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE raised, and the “ESP/TCS Indicator Light” will be illuminated. This mode is intended to be used for a more spirited driving experience, or if the vehicle is in deep snow, sand, or gravel conditions and more wheel spin that ESP would normally allow is required. To turn ESP on again, momentarily depress the “ESP OFF” button. WARNING! In the Partial ESP mode, the engine torque reduction and stability features are desensitized.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 NOTE: • The “ESP Indicator Light” and the “ESP/BAS Warning Light” come on momentarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESP System will be ON even if it was turned off previously. 3 • The ESP Control System will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESP becomes inactive following the maneuver that caused the ESP activation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control is ON. A message will be displayed in the Electronic Vehicle Information Center (EVIC) if the pedals are attempted to be adjusted when the system is locked out (“Adjustable Pedal Disabled — Cruise Control Engaged” or “Adjustable Pedal Disabled — Vehicle In Reverse”).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Rear Park Assist System can be active only when the transaxle shift lever is in R (Reverse). If the Rear Park Assist System is enabled at this shift position, the system will be active until the vehicle speed is increased to approximately 11 mph (18 km/h) or above. The system will be active again if the vehicle speed is decreased to speeds less than approximately 10 mph (16 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Park Assist Warning Display The Rear Park Assist Warning Display, located in the headliner near the liftgate glass, provides both visual and audible warnings to indicate the distance between the rear fascia and the detected obstacle. When the ignition is changed to the RUN/ON position, the warning display will turn ON all of its LEDs for about 1 second. Each side of the warning display has 6 yellow and 2 red LEDs.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 WARNING DISPLAY DISTANCES DISPLAY LED 1st LED 2nd LED 3rd LED 4th LED 5th LED 6th LED 7th LED 8th LED OBSTACLE DISTANCE FROM: REAR CORNERS REAR CENTER 78.7 in. (200 cm) 51.2 in. (130 cm) 45.3 in. (115 cm) 31.5 in. (80 cm) 39.3 in. (100 cm) 25.5 in. (65 cm) 33.5 in. (85 cm) 20 in. (50 cm) 27.6 in. (70 cm) 16 in. (40 cm) 19.7 in. (50 cm) Red 6 in. (15 cm) 11.8 in.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Drivers must be careful when backing up even when using the Rear Park Sense System. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up. You are responsible for the safety of your surroundings and must continue to pay attention while backing up. Failure to do so can result in serious injury or death.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 NOTE: • Ensure that the rear bumper is free of dirt and debris to keep the system operating properly. system is disabled, the instrument cluster will actuate a single chime, once per ignition cycle, and it will display the message. • Jackhammers, large trucks, and other vibrations could affect the performance of the system. The Rear Park Assist Switch LED will be ON when the Rear Park Assist System is disabled or defective.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE If (SERVICE PARK ASSIST SYSTEM( appears in the Electronic Vehicle Information Center (EVIC) after making sure the rear bumper is clean please see your authorized dealer. NOTE: Refer to “Setting Display Properties” under “System Settings” in the Navigation User’s Manual for instructions regarding navigation screen brightness adjustments. Cleaning the Rear Park Assist System Clean the Rear Park Assist Sensors with water, car wash soap and a soft cloth.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Backup as necessary. 6. Place the sift lever in P (Park) or D (Drive) to exit the Rear Backup Camera system. WARNING! Drivers must be careful when backing up even when using the Rear Camera System. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up. You are responsible for the safety of your surroundings and must continue to pay attention while backing up.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLE — IF EQUIPPED The overhead console can contain courtesy/reading lights, an optional universal garage door opener (HomeLinkt), storage for sunglasses, optional power sunroof switches and an optional power liftgate switch. Courtesy/Reading Lights At the forward end of the console are two courtesy/ reading lights. Press the lens to turn these lights on. Press a second time to turn the lights off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The power sunroof buttons are located between the sun visors on the overhead console. 169 Press and hold the “OPEN” button rearward to fully open the sunroof. The sunroof can be stopped at any position between closed and full open. Momentarily pressing the “OPEN” button rearward will activate the Express Open Feature, causing the sunroof to open automatically. Press and hold the “VENT” button to open the vent.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Express Open Feature The sunroof is equipped with an intermediate stop or comfort stop position. This feature is designed to eliminate wind buffeting at vehicle speeds between 20-40 mph (32-64 km/h). To operate this feature, momentarily press the “OPEN” button rearward to activate the Express Open Feature and the glass will automatically stop at the comfort stop position. Pressing the button rearward again will fully open the sunroof.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • NEVER leave children alone in a vehicle. Occu- pants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. Don’t leave the keys in the ignition. A child could operate power windows, other controls, or move the vehicle • In an accident, there is a greater risk of being thrown from a vehicle with an open sunroof.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. ELECTRICAL POWER OUTLETS There are two 12 volt power outlets located on the instrument panel below the radio. The driver’s side outlet is controlled by the ignition switch and the passenger side outlet is connected directly to the battery. The driver’s side outlet will also operate a conventional cigar lighter unit (if equipped with an optional Smoker’s Package).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The outlets include tethered caps labeled with a key or battery symbol indicating the power source. The passenger side instrument panel and center console outlets are powered directly from the battery, items plugged into these outlets may discharge the battery and/or prevent engine starting. The passenger side and center console outlets are protected by an automatic reset circuit breaker. The automatic circuit breaker restores power when the overload is removed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Front Seat Cupholders The cupholders are located in the forward edge of the center console. Push down on the forward edge of the console to release the cupholders. Press the cover up when the cupholders are no longer needed. Six Passenger Seating Cupholders Second Row Seat Cupholders On vehicles equipped with five passenger seating the second row seat cupholders are located in middle of the seatback armrest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE On vehicles equipped with six passenger seating the second row seat cupholders are located in the forward edge of the center console located between the second row seats. Push down on the forward edge of the console to release the cupholders. Press the cover up when the cupholders are no longer needed. Rear Cargo Storage Bin — If Equipped The storage bin is located in the floor of the rear cargo area. To open lift up on the handle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Retractable Cargo Area Cover — If Equipped To cover the cargo area: 1. Fold down the third row seatbacks. 2. Unfold the cargo cover extensions and lock into place. 3. Insert the pins on the ends of the cover into the slots located on the trim panel behind the second row seatbacks. 4. Grasp the center portion of the cover flap. Pull it over the cargo area. 5. Insert the pins on the ends of the cover flap into the slots on the rear trim panel. 6.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Grasp the center portion of the cover flap. Pull it over the cargo area. 5. Insert the pins on the ends of the cover flap into the slots on the rear trim panel. 6. The liftgate may be opened or closed with the cargo cover in place. Cargo Tie-Down Hooks The tie-downs located on cargo area floor and on the rear trim panels should be used to safely secure loads when vehicle is moving.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Place as much cargo as possible in front of the rear axle. Too much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway. • Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or become a dangerous projectile in a sudden stop or collision.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Distribute cargo weight evenly on the roof rack crossbars. The roof rack does not increase the total load carrying capacity of the vehicle. Be sure the total load of cargo inside the vehicle plus that on the external rack does not exceed the maximum vehicle load capacity. To move the cross bars, press the upper edge of each cross bar button, then move the cross bar to the desired position, keeping the crossbars parallel to the rack frame.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! • Crossbars should remain equally spaced or parallel at any luggage rack position for proper function. Noncompliance could result in damage to the luggage rack, cargo and/or vehicle. Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS m Instrument Panel And Controls . . . . . . . . . . . . . 184 ▫ Mini-Trip Functions — If Equipped . . . . . . . . 208 m Base Instrument Cluster . . . . . . . . . . . . . . . . . . 185 m Setting The Analog Clock . . . . . . . . . . . . . . . . . 209 m Premium Instrument Cluster . . . . . . . . . . . . . . . 186 m Electronic Digital Clock . . . . . . . . . . . . . . . . . . 209 m Instrument Cluster Descriptions . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL ▫ FM Reception . . . . . . . . . . . . . . . . . . . . . . . . 211 ▫ Notes On Playing MP3 Files . . . . . . . . . . . . . 228 m Sales Code RAH — AM & FM Stereo Radio With CD Player And CD/DVD Changer Controls . . . . 212 ▫ Operation Instructions - (CD Mode For MP3 Audio Play) . . . . . . . . . . . . . . . . . . . . . . . . . 230 ▫ Radio Operation . . . . . . . . . . . . . . . . . . . . . . 212 ▫ Operating Instructions — MP3 Player, Portable Walkman . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 183 m Navigation System — If Equipped . . . . . . . . . . . 244 ▫ Satellite Antenna . . . . . . . . . . . . . . . . . . . . . . 248 m Satellite Radio — If Equipped . . . . . . . . . . . . . . 245 ▫ Reception Quality . . . . . . . . . . . . . . . . . . . . . 248 ▫ ystem Activation . . . . . . . . . . . . . . . . . . . . . . 245 m Remote Sound System Controls . . . . . . . . . . . . . 249 ▫ Electronic Serial Number/Sirius Identification Number (ENS/SID) . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL AND CONTROLS
UNDERSTANDING YOUR INSTRUMENT PANEL 185 BASE INSTRUMENT CLUSTER 4
UNDERSTANDING YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Voltage Light This light monitors the electrical system voltage. The light should turn on momentarily as the engine is started. If the light stays on or turns on while driving, it indicates a problem with the charging system. Immediate service should be obtained. 2. Temperature Gauge The temperature gauge shows engine coolant temperature.
UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph. 3. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position.
UNDERSTANDING YOUR INSTRUMENT PANEL 189 is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on. indicated by the Brake Warning Light which will turn on when the brake fluid level in the master cylinder has dropped below a specified level. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes.
UNDERSTANDING YOUR INSTRUMENT PANEL Vehicles equipped with Anti-Lock brakes (ABS), are also equipped with Electronic Brake Force Distribution (EBD). In the event of an EBD failure, the Brake Warning Light will turn on along with the ABS Light. Immediate repair to the ABS system is required. The operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the ON position. The light should illuminate for approximately two seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 9. Tachometer The red segments indicate the maximum permissible engine revolutions-per-minute (rpm. x 1000) for each gear range. Before reaching the red area, ease up on the accelerator. 10. Trip Odometer Button Press this button to change the display from odometer to either of the two trip odometer settings. The word TRIP and either “A” or “B” will appear when in the trip odometer mode.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If the instrument cluster is equipped with the optional Electronic Vehicle Information Center (EVIC), then all warnings will only display in the EVIC. (Refer to “Electronic Vehicle Information Center (EVIC)” in this section for specific messages). gASCAP If the vehicle diagnostic system detects a leak or change in the evaporative system, or the fuel filler cap is loose, improperly installed, or damaged, the words “gASCAP” will display in the odometer.
UNDERSTANDING YOUR INSTRUMENT PANEL 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition switch to the LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary repeat this procedure. 14. Cruise Indicator This indicator shows that the Speed Control System is ON. 15.
UNDERSTANDING YOUR INSTRUMENT PANEL 17. Navigation Screen/Rear View Camera — If Equipped The navigation system provides maps, turn identification, selection menus and instructions for selecting a variety of destinations and routes. Refer to your “Navigation User’s Manual” for detailed operating instructions. The Rear View Camera system uses the Navigator Screen to display the area behind the vehicle. Camera view will display only while the vehicle is in R (Reverse). 18.
UNDERSTANDING YOUR INSTRUMENT PANEL 21. Tire Pressure Monitoring Telltale Lamp Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.
UNDERSTANDING YOUR INSTRUMENT PANEL alternate tires or wheels on the vehicle that prevent the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.
UNDERSTANDING YOUR INSTRUMENT PANEL 197 For additional information on Tire Pressures, refer to Section 5 — Starting and Operating, “Tire Inflation Pressures” of this manual. chime, the engine temperature is critically hot, and the vehicle should be turned off immediately. The vehicle should be serviced as soon as possible. 22. Airbag Light This light turns on and remains on for 6 to 8 seconds as a bulb check when the ignition switch is first turned ON.
UNDERSTANDING YOUR INSTRUMENT PANEL 28. Electronic Stability Program (ESP) Warning Light/Brake Assist System (BAS) Warning Light — If Equipped The malfunction lamp for the ESP is combined with BAS. The yellow “ESP/BAS Warning Lamp” comes on when the ignition switch is turned to the “ON” position. They should go out with the engine running. If the “ESP/BAS Warning Lamp” comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system.
UNDERSTANDING YOUR INSTRUMENT PANEL When lit solid: There is an AWD system fault. AWD performance will be at a reduced level. Service the AWD system soon. When blinking: The AWD system is temporarily disabled due to overload condition. ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED The Electronic Vehicle Information Center (EVIC) consists of the following: 199 Pressing the MENU button will change the displayed programming features. Pressing the STEP button will display the available choices.
UNDERSTANDING YOUR INSTRUMENT PANEL • PROGRAM KEY & FOB • UNLOCK TO OPEN LIFTGATE (with a single chime) • MEMORY #1/#2 POSITION SET (with a single chime) • PUT IN PARK FOR LIFTGATE (with a single chime) • MEMORY #1/#2 POS SELECTED • TOO COLD FOR PWR LIFTGATE (with a single chime) • MEMORY SYSTEM DISABLED VEHICLE NOT IN PARK (with a single chime) • SET INHIBITED DUE TO MOTION (with a single chime) • FOB LINKED (with a single chime) • FOB UNLINKED (with a single chime) • PARK BRAKE ENGAGED (with a
UNDERSTANDING YOUR INSTRUMENT PANEL • WASHER FLUID LOW (with a single chime) • PEDAL ADJUST DISABLED CRUISE ENGAGED • PEDAL ADJUST DISABLED VEHICLE IN REVERSE 201 • 1,2,3 OR 4 TIRE(S) LOW PRESSURE (Refer to ”Tire Pressure Monitor System” in the “Starting And Operating, Tire Section”) • CHANNEL 1, 2, OR 3 TRANSMIT (with a single chime) • SERVICE TIRE SYSTEM SOON (Refer to ”Tire Pressure Monitor System” in the “Starting And Operating, Tire Section”) • CHANNEL 1, 2, OR 3 TRAINING (with a single chime) •
UNDERSTANDING YOUR INSTRUMENT PANEL Oil Change Required Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style.
UNDERSTANDING YOUR INSTRUMENT PANEL 203 Customer Programmable Features — If Equipped Press the MENU button until one of the following display choices appears: ASSIST DISABLED after the feature has been disabled and SERVICE PARK ASSIST SYSTEM if there is a problem with the system. Language? When in this display you may select one of three languages for all display nomenclature, including the trip computer functions and navigation system.
UNDERSTANDING YOUR INSTRUMENT PANEL Use factory Settings? When in this display you may select to use the factory settings and no programmable features will be offered. Tilt Mirrors in Reverse? (Available with Memory Seat Only) When this feature is selected the outside mirrors will move slightly downward from the present position when the vehicle is shifted into the Reverse position. The outside mirrors will then return to the original position when the vehicle is shifted out of Reverse position.
UNDERSTANDING YOUR INSTRUMENT PANEL Remote Linked To Memory? (Available with Memory Seat Only) When this feature is selected the memory seat, mirror, and radio settings will return to the memory set position when the remote keyless entry “Unlock” button is pressed. If this feature is not selected then the memory seat, mirror, and radio settings can only return to the memory set position using the door mounted switch. Pressing the STEP button when in this display will select “Yes” or “No.
UNDERSTANDING YOUR INSTRUMENT PANEL turn off when the wipers are turned off if they were turned on in this way. Pressing the STEP button when in this display will select “Yes” or “No.” NOTE: Turning the headlights on during the daytime causes the instrument panel lights to dim. To increase the brightness, refer to “Lights” in this section.
UNDERSTANDING YOUR INSTRUMENT PANEL Compass Display — If Equipped This display provides one of eight compass readings to indicate the direction the vehicle is facing. Automatic Compass Calibration This compass is self-calibrating which eliminates the need to manually calibrate the compass. When the vehicle is new, the compass may appear erratic and the EVIC will display “COMPASS CALIBRATING” until the compass is calibrated. The compass will function normally.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Magnetic materials should be kept away from the overhead console. To set the variance: Turn the ignition switch ON and set the display to Compass. Press the MENU button for approximately 5 seconds but no more than 10 seconds. The “COMPASS VARIANCE” message and the last variance zone number will be displayed. Press the STEP button to select the proper variance zone as shown in the map.
UNDERSTANDING YOUR INSTRUMENT PANEL • Off Mode Shows a blank display. • Step Button Push this button to cycle through all the Mini-trip functions. To Reset The Display Pressing and releasing the Reset button once will clear the resettable function currently being displayed. The resettable function is average fuel economy. Reset will only occur if the resettable function is currently being displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL On vehicles equipped with an Analog Clock the radio time display will function as follows: Clock Setting Procedure • Radio On — Radio clock will display for approximately 5 seconds after button is pressed, then default back to radio frequency. 1. Turn the ignition switch to the ON or ACC position and press the time button. Using the tip of a ballpoint pen or similar object, press either the hour (H) or minute (M) buttons on the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 211 you understand and save you concern about these “apparent” malfunctions, you must understand a point or two about the transmission and reception of radio signals. AM Reception AM sound is based on wave amplitude, so AM reception can be disrupted by such things as lightning, power lines and neon signs. Two Types of Signals There are two basic types of radio signals...
UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RAH — AM & FM STEREO RADIO WITH CD PLAYER AND CD/DVD CHANGER CONTROLS NOTE: The radio sales code is located on the lower left side of your radio faceplate. Radio Operation Power/Volume Control Press the ON/VOL control to turn the radio on. Turn the volume control clockwise to increase the volume. NOTE: Power to operate the radio is supplied through the ignition switch. It must be in the ON or ACC position to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the TUNE button to select the following format types: Program Type Adult Hits Classical Classic Rock College Country Information Jazz Foreign Language News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Radio Display Adult Hit Classical Classic Rock College Country Inform Jazz Language News Nostalgia Oldies Personality Public R&B Religious Music Program Type Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather
UNDERSTANDING YOUR INSTRUMENT PANEL no station is found with the selected PTY program type, the radio will return to the last preset station. make another selection. Holding the button in will bypass stations without stopping until you release it. If a preset button is activated while in the PTY (Program Type) mode, the PTY mode will be exited and the radio will tune to the preset station. Tuning Press the TUNE control up or down to increase or decrease the frequency.
UNDERSTANDING YOUR INSTRUMENT PANEL Tone Control The Bass and/or Treble controls sound for the desired tone. Press the AUDIO button, select Bass or TREBLE, then press SEEK + or SEEK 2 to increase or decrease amplification of the band. To Set The Radio Push-Button Memory When you are receiving a station that you wish to commit to push-button memory, press the SET button. SET 1 will show in the display window. Select the push-button you wish to lock onto this station and press and release that button.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. CD Player Operation NOTE: • The ignition switch must be in the ON or ACC position and the volume control ON before the CD player will operate.
UNDERSTANDING YOUR INSTRUMENT PANEL Seek Press the top of the SEEK button for the next selection on the CD. Press the bottom of the button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first 10 seconds of the current selection. EJT — Eject Press the EJT button and the disc will unload and move to the entrance for easy removal. The unit will switch to the radio mode.
UNDERSTANDING YOUR INSTRUMENT PANEL CD/DVD Changer Operation Press the MODE button to select between the CD player and the optional remote CD/DVD changer. Time Press the TIME button to change the display from elapsed CD or DVD playing time to time of day. Notes On Playing MP3 Files The radio can play MP3 files, however, acceptable MP3 file recording media and formats are limited. When writing MP3 files, pay attention to the following restrictions.
UNDERSTANDING YOUR INSTRUMENT PANEL CD audio tracks and computer files (including MP3 files). Discs created with an option such as 9keep disc open after writing9 are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 file formats The radio will recognize only files with the *.mp3 extension as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems.
UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 RW/FF (CD Mode For MP3 Play) Press the FF side of the button to move forward through the MP3 selection. Press the RW side of the button to move back through the MP3 selection. Operating Instructions - Hands Free Phone (If Equipped) Refer to Hands Free Phone section of the Owner’s Manual. AM/FM Button (CD Mode For MP3 Play) Switches back to Radio mode.
UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE REV — AM & FM STEREO RADIO WITH CD PLAYER AND CD/DVD CHANGER CONTROLS NOTE: The radio sales code is located on the lower left side of your radio faceplate. Radio Operation Power/Volume Control Press the ON/VOL control to turn the radio on. Turn the volume control clockwise to increase the volume. NOTE: Power to operate the radio is supplied through the ignition switch. It must be in the ON or ACC position to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the TUNE button to select the following format types: Program Type Adult Hits Classical Classic Rock College Country Information Jazz Foreign Language News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Radio Display Adult Hit Classical Classic Rock College Country Inform Jazz Language News Nostalgia Oldies Personality Public R&B Religious Music Program Type Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather
UNDERSTANDING YOUR INSTRUMENT PANEL no station is found with the selected PTY program type, the radio will return to the last preset station. make another selection. Holding the button in will bypass stations without stopping until you release it. If a preset button is activated while in the PTY (Program Type) mode, the PTY mode will be exited and the radio will tune to the preset station. Tuning Press the TUNE control up or down to increase or decrease the frequency.
UNDERSTANDING YOUR INSTRUMENT PANEL Tone Control The Bass and/or Treble controls sound for the desired tone. Press the AUDIO button, select Bass or TREBLE, then press SEEK + or SEEK 2 to increase or decrease amplification of the band. To Set The Radio Push-Button Memory When you are receiving a station that you wish to commit to push-button memory, press the SET button. SET 1 will show in the display window. Select the push-button you wish to lock onto this station and press and release that button.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. CD Player Operation NOTE: • The ignition switch must be in the ON or ACC position and the volume control ON before the CD player will operate.
UNDERSTANDING YOUR INSTRUMENT PANEL Seek Press the top of the SEEK button for the next selection on the CD. Press the bottom of the button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first 10 seconds of the current selection. EJT — Eject Press the EJT button and the disc will unload and move to the entrance for easy removal. The unit will switch to the radio mode.
UNDERSTANDING YOUR INSTRUMENT PANEL CD/DVD Changer Operation Press the MODE button to select between the CD player and the optional remote CD/DVD changer. Time Press the TIME button to change the display from elapsed CD or DVD playing time to time of day. Notes On Playing MP3 Files The radio can play MP3 files, however, acceptable MP3 file recording media and formats are limited. When writing MP3 files, pay attention to the following restrictions.
UNDERSTANDING YOUR INSTRUMENT PANEL CD audio tracks and computer files (including MP3 files). Discs created with an option such as 9keep disc open after writing9 are most likely multi-session discs. The use of multi-session for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 file formats The radio will recognize only files with the *.mp3 extension as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems.
UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
UNDERSTANDING YOUR INSTRUMENT PANEL 231 RW/FF (CD Mode For MP3 Play) Press the FF side of the button to move forward through the MP3 selection. Press the RW side of the button to move back through the MP3 selection. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to the Satellite Radio section of the Owner’s Manual. AM/FM Button (CD Mode For MP3 Play) Switches back to Radio mode. Operating Instructions — MP3 Player, Portable Walkman An MP3 player can be connected to the audio system.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: To operate a video game unit a DC to AC adapter may be required, plug the adapter into any power outlet. Listed below is the standard RCA Jack/Cable connection. You may also want to refer to the manufacture’s instructions for the correct colors when connecting the RCA cables.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The ignition switch must be in the ON or ACC position before the CD/DVD changer will operate. 233 Operating Instructions — CD/DVD Changer Loading The CD/DVD Changer The premium version has a multi-disc changer, and will accept up to six discs. The base version is a single-disc player, and will only accept one disc. To insert disc(s) into the changer, follow the instructions shown: 1.
UNDERSTANDING YOUR INSTRUMENT PANEL which numbered position the disc will be loaded into. The disc will automatically be pulled into the CD/DVD changer. 3. Upon insertion, the disc will begin to play, and the light below the loading slot will turn off. On vehicles equipped with the premium version the light above the chosen button will remain illuminated. 4. Repeat the process for loading any additional CD/ DVDs into the premium version multi-disc changer.
UNDERSTANDING YOUR INSTRUMENT PANEL 235 EJECT (EJT) Button If there is a disc in the changer, press the EJT button and the disc will eject. If you do not remove the disc within 10 seconds, it will be reloaded and the display will show PAUSE. The radio mode will continue to operate. To eject additional discs from the premium version multi-disc changer, first select the numbered button where the disc is located and then press the EJT button.
UNDERSTANDING YOUR INSTRUMENT PANEL Remote Control Buttons 1. Headphone Transmitter 2. Menu Up/Next Track/Chapter 3. Menu Left/Fast Rewind 4. Return 5. Setup 6. Pause/Play 7. Mute 8. Display 9. Mode 10. Program Down - Previous Disc 11. Program Up - Next Disc 12. Slow 13. Stop 14. Menu 15. Menu Down/Previous Track/Chapter 16. Menu Right/Fast Forward Remote Control Buttons 17. Enter 18.
UNDERSTANDING YOUR INSTRUMENT PANEL 237 RTN Button (4) This button only functions in CD/DVD mode. Press this button to return to the previous menu when in the disc menu mode. PAUSE/PLAY Button (6) This button only functions in DVD video mode. Press this button once to pause the video, press a second time to play the video. SETUP Button (5) This button only functions in CD/DVD mode. Press the button after pressing the STOP button to access the set up menu.
UNDERSTANDING YOUR INSTRUMENT PANEL This button changes between available modes and can be heard in the headphones. PROG UP/DOWN Buttons (10, 11) PROG UP selects the next disc loaded in the changer. PROG DOWN selects the previous disc loaded in the changer. SLOW Button (12) This button only functions in DVD video mode. Press this button to advance the video. If the DVD is paused, pressing this button will advance the video frame by frame. STOP Button (13) This button only functions in DVD video mode.
UNDERSTANDING YOUR INSTRUMENT PANEL 239 Light Button (18) Pressing this button illuminates the buttons on the remote control. Remote Control Battery Service • To replace the batteries for the remote control slide the cover rearward. 4 The replacement batteries for the remote control are two AAA batteries. Operating Instructions — Video Screen Push up on the release button to lower the video screen.
UNDERSTANDING YOUR INSTRUMENT PANEL 1. Screen Width Button Changes the width of the screen picture. 2. Enter Button This button will enter the selection from the on-screen menu. 3. Brightness Button Changes the brightness of the screen picture.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Headphones 241 Power Button Pressing the power button will turn the headphones ON/OFF. An indicator light will illuminate on the headphone earpiece to indicate the headphones are ON. NOTE: • The headphones will turn OFF automatically in approximately 3 minutes if they lose the signal form the system or when the radio or rear audio/video system is turned OFF.
UNDERSTANDING YOUR INSTRUMENT PANEL Headphone Battery Service • Press the button at the bottom of each headphone earpiece and lift the cover upward. General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Auxiliary Input • Connect your auxiliary device (video game system, video camera, or MP3 player) cables to the color coded auxiliary jacks on the front of the DVD changer. (Refer to the illustration below). • Turn your auxiliary device on and adjust its volume to mid or high position. NOTE: Audio can now be heard through the vehicle’s speaker system or through the headphones (if Rear Seat Audio is turned ON).
UNDERSTANDING YOUR INSTRUMENT PANEL NAVIGATION SYSTEM — IF EQUIPPED The navigation system provides maps, turn identification, selection menus and instructions for selecting a variety of destinations and routes. The buttons to operate the system are located on the instrument panel next to the analog clock. Refer to your Navigation User’s Manual for detailed operating instructions. The navigation DVD unit is located in the underfloor storage compartment in the rear cargo area.
UNDERSTANDING YOUR INSTRUMENT PANEL SATELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to receiver broadcasting technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius™ Satellite Radio. This service offers over 130 channels of music, sports, news, entertainment, and talk radio, directly from its satellites and broadcasting studios.
UNDERSTANDING YOUR INSTRUMENT PANEL DOWN (-) will page down until the first four digits are displayed. The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF, or 5 minutes has passed since any button was pushed. ESN/SID Access With RBP, RBU, RAZ, RB1 and RBQ Radios With the ignition switch in the ACCESSORY position and the radio OFF, press the CD Eject and TIME buttons simultaneously for 3 seconds. All twelve ESN/SID numbers will be displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 Selecting a Channel Press and release the SEEK or TUNE buttons to search for the next channel. Press the top of the button to search up and the bottom of the button to search down. Holding the TUNE button causes the radio to bypass channels until the button is released. Storing and Selecting Pre-Set Channels In addition to the 10 AM and 10 FM pre-set stations, you may also commit 10 satellite stations to push button memory.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Pressing the 9SEEK9 or 9SCAN9 button while performing a music type scan will change the channel by one and stop the search. Pressing a pre-set memory button during a music type scan, will call up the memory channel and stop the search. PTY Button (SEEK( When the desired program is obtained, press the 9SEEK9 button within five seconds. The channel will change to the next channel that matches the program type selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 249 REMOTE SOUND SYSTEM CONTROLS The remote sound system controls are located on the rear surface of the steering wheel at the 3 and 9 o’clock positions. Radio Operation Pressing the top of the switch will SEEK up for the next listenable station and pressing the bottom of the switch will SEEK down for the next listenable station. The right hand rocker switch has a push button in the center and controls the volume and mode of the sound system.
UNDERSTANDING YOUR INSTRUMENT PANEL CD/DVD DISC MAINTENANCE To keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper, paper CD labels, or tape to the disc; avoid scratching the disc. 4. Do not use solvents such as benzine, thinner, cleaners, or antistatic sprays. 5. Store the disc in its case after playing. 6.
UNDERSTANDING YOUR INSTRUMENT PANEL Manual Air Conditioning and Heating System 251 second time the indicator light turns off, the blower will turn off and the system will be positioned in the recirculation mode. Blower Control The Blower controls the amount of air delivered to the passenger compartment. There are four blower speeds. The fan speed increases as you move the control clockwise.
UNDERSTANDING YOUR INSTRUMENT PANEL Dual Zone Temperature Control — If Equipped With the Dual Zone Temperature Control System, each front seat occupant can independently control the temperature of air coming from the outlets on their side of the vehicle. Mode Control The mode control allows you to choose from several patterns of air distribution. NOTE: To improve your selection choices, the system allows you to operate at intermediate positions between the major modes.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 Air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow of air. Moving the air vane knob on the center outlets down, will close off the air flow from the center outlets. The thumbwheel next to the outboard outlets can be rotated to regulate or shut off the air flow from these outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL Air comes from both the instrument panel outlets, floor outlets and defrost. A slight amount of air is also directed through the side window demister outlets. Bi-Level Mode NOTE: In many temperature lever positions, the bilevel mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL Floor Mode 255 Mix Mode 4 Floor Outlets Mix Outlets Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Air comes from the floor, defrost and side window demist outlets. This mode works best in cold or snowy conditions. It allows you to stay comfortable while keeping the windshield clear.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: For improved safety, the compressor is activated and the recirculation mode is deactivated when Mix or Defrost modes are selected. This is done to assist in drying the air and it will help in keeping the windows from fogging. Defrost Mode Manual Air Conditioning Operation To turn on the air conditioning, set the front blower control to any speed and press the A/C button which is located next to the recirculation button.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • The compressor will not engage until the engine has been running for a few seconds. • If your air conditioning performance seems lower than expected, check the A/C air filter (ATC equipped vehicles only) and the front of the A/C condenser for an accumulation of dirt or insects. The A/C condenser is located in front of the radiator. The A/C air filter is located under the instrument panel on the passenger side.
UNDERSTANDING YOUR INSTRUMENT PANEL • If the recirculation button is pressed while in the Mix or Defrost mode, the indicator light in the recirculation button will flash 3 times indicating that recirculation is not allowed. • Turn the ignition switch to the OFF position. A/C Recirculation Programming The recirculation control is programmed to cancel the recirculation mode when the ignition key is turned OFF and will reset to outside air mode when the ignition key is turned ON.
UNDERSTANDING YOUR INSTRUMENT PANEL Dual-Zone Automatic Temperature Control The Dual Zone Automatic Temperature Control (ATC) System automatically maintains the interior comfort level desired by the driver and front seat passenger. This is accomplished by using two infrared sensors located in the center of the instrument panel. The two infrared sensors independently measure the surface temperature of the driver and front seat passenger.
UNDERSTANDING YOUR INSTRUMENT PANEL temperature you would like the system to maintain. When the system is set to your comfort level, it is not necessary to change the settings. You will experience the greatest efficiency by allowing the system to function automatically. The system will operate fully automatically in either 9AUTO HI9 or 9AUTO LO9. The 9AUTO LO9 setting will limit the maximum fan speed and should be used when more quiet operation is desired.
UNDERSTANDING YOUR INSTRUMENT PANEL This feature may be enabled using the following procedure: • Press and hold the Heated Rear Window and Auto HI buttons for 5 seconds. • The “DELAY” symbol will flash to indicate that the feature as been enabled. Power Button This button turns the entire system ON/OFF. When the system is turned on it will return to the previous settings.
UNDERSTANDING YOUR INSTRUMENT PANEL The front blower control can be set to any fixed blower speed by pressing the rocker switch up or down. This allows the front occupants to control the volume of air circulated in the vehicle and cancel the auto mode. The fan will now operate at a fixed speed until additional speeds are selected or until either the 9AUTO HI9 or 9AUTO LO9 buttons are pressed. The system will continue to automatically adjust air temperature and airflow distribution.
UNDERSTANDING YOUR INSTRUMENT PANEL 263 Air comes from both the instrument panel outlets and floor outlets. A slight amount of air is also directed through the defrost and side window demister outlets. Bi-Level Mode NOTE: In many temperature positions, the bi-level mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL Floor Mode Mix Mode Floor Outlets Mix Outlets Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Air comes from the floor, defrost and side window demist outlets. This mode is not used when operating in either 9AUTO HI9 or 9AUTO LO9. This mode should be used when airflow to the floor and windshield is desired.
UNDERSTANDING YOUR INSTRUMENT PANEL 265 windshield or side glass starts to impair visibility, press the front blower button and increase the fan speed to maximum. Defrost Mode NOTE: While operating in 9AUTO HI9 or 9AUTO LO9, the system will not automatically sense the presence fog, mist, or ice on the windshield. The defrost button must be pressed to clear the windshield and side glass. Defrost Outlets Depress the “A/C” button to turn on and off the air conditioning during manual operation only.
UNDERSTANDING YOUR INSTRUMENT PANEL windshield or side glass starts to impair visibility, press the front blower button and increase the fan speed to maximum. Recirculation Control When the outside air contains smoke, odors, high humidity, or if rapid cooling is desired you may wish to recirculate interior air by pressing the recirculation button. The recirculation mode should only be used temporarily. The recirculate symbol will illuminate in the display when this button is selected.
UNDERSTANDING YOUR INSTRUMENT PANEL • While holding the recirculation button, turn the ignition switch to the “RUN” position. • Continue holding the recirculation button for 4 seconds, then release. The recirculation control is now programmed so that the recirculation mode will not reset to the outside air mode when the engine is restarted. The recirculation programming can be changed back by repeating this procedure. Rear Blower Operation To operate the rear fan, press the 9REAR9 button.
UNDERSTANDING YOUR INSTRUMENT PANEL glycol antifreeze coolant in water is recommended. Refer to section 7, Maintenance Procedures, of this manual for proper coolant selection. Winter Operation To insure the best possible heater and defroster performance, make sure the engine cooling system is functioning properly and the proper amount, type, and concentration of coolant is used. Refer to section 7, Maintenance Procedures, of this manual for proper coolant selection.
UNDERSTANDING YOUR INSTRUMENT PANEL A/C Air Filter — If Equipped On vehicles equipped with Automatic Temperature Control (ATC), the climate control system filters out dust and pollen from the air. Refer to section 7 “Air Conditioning” for filter replacement instructions. Outside Temperature Display The outside temperature can be shown in the ATC display by pressing the 9OUTSIDE TEMP9 button.
STARTING AND OPERATING CONTENTS m Starting Procedures . . . . . . . . . . . . . . . . . . . . . 275 m Automatic Transmission . . . . . . . . . . . . . . . . . . 278 ▫ Automatic Transmission . . . . . . . . . . . . . . . . 276 ▫ Brake/Transmission Interlock System . . . . . . . 279 ▫ Normal Starting (Above 32°F / 0°C) . . . . . . . . 276 ▫ Automatic Transmission Ignition Interlock System . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING m Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . . 285 ▫ Tire Loading And Tire Pressure . . . . . . . . . . . 299 m Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . 287 m Tires — General Information . . . . . . . . . . . . . . . 303 ▫ Anti-Lock Brake System . . . . . . . . . . . . . . . . 288 ▫ Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . . . 303 m Power Steering . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 273 m Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 ▫ Reformulated Gasoline . . . . . . . . . . . . . . . . . 326 m Tire Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . 313 ▫ Gasoline/Oxygenate Blends . . . . . . . . . . . . . . 326 m Tire Pressure Monitor System (TPMS) . . . . . . . . 314 ▫ MMT In Gasoline . . . . . . . . . . . . . . . . . . . . . 327 ▫ Basic TPMS Without EVIC — If Equipped . . . . 317 ▫ Materials Added To Fuel . . . . . .
STARTING AND OPERATING ▫ Overloading . . . . . . . . . . . . . . . . . . . . . . . . . 332 ▫ Trailer And Tongue Weight . . . . . . . . . . . . . . 341 ▫ Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333 ▫ Towing Requirements . . . . . . . . . . . . . . . . . . 342 m Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . 334 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . . 347 ▫ Common Towing Definitions . . . . . . . . . . . . .
STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. 275 WARNING! • Be sure to turn off the engine and remove the key from the ignition switch if you want to rest or sleep in your car. Accidents can be caused by inadvertently moving the gear selection lever or by pressing the accelerator pedal.
STARTING AND OPERATING Automatic Transmission The gear selector must be in the NEUTRAL or PARK position before you can start the engine. Depress the brake pedal before shifting into any driving gear. Extremely Cold Weather Starting (Below 220°F / –29°C) Follow the same instructions in the “Normal Starting” procedure.
STARTING AND OPERATING If Engine Fails To Start If the engine fails to start after you have followed the “Normal Starting” procedure, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine. This should clear any excess fuel in case the engine is flooded. CAUTION! To prevent damage to the starter, do not crank the engine for more than 15 seconds at a time. Wait 10 to 15 seconds before trying again.
STARTING AND OPERATING released. If this occurs, continue cranking with the accelerator pedal pushed all the way to the floor. Release the accelerator pedal and the key once the engine is running smoothly. If the engine shows no sign of starting after two 15 second periods of cranking with the accelerator pedal held to the floor, the “Normal Starting” procedure should be repeated. After Starting The idle speed will automatically decrease as the engine warms up.
STARTING AND OPERATING 279 CAUTION! WARNING! Damage to the transmission may occur if the following precautions are not observed: It is dangerous to shift the selector lever out of “P” or “N” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something.
STARTING AND OPERATING Automatic Transmission Ignition Interlock System This system prevents the key from being removed unless the shift lever is in PARK. It also prevents shifting out of PARK unless the key is in the ACCESSORY or ON position. right corner of the shifter bezel ring. While the override is pressed, the shifter can be moved out of the park position without pressing the brake. After operation return the shifter bezel ring to its original position.
STARTING AND OPERATING possible convenience. Your dealer has diagnostic equipment to determine if the problem could recur. Gear Ranges DO NOT race the engine when shifting from PARK or NEUTRAL positions into another gear range. “P” Park Supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while vehicle is in motion. Apply parking brake when leaving vehicle in this range.
STARTING AND OPERATING AUTOSTICK AutoStick is a driver-interactive transmission that offers manual gear shifting capability to provide you with more control. AutoStick allows you to maximize engine braking, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance. This system can also provide you with more control during passing, city driving, cold slippery conditions, mountain driving, trailer towing, and many other situations.
STARTING AND OPERATING • Transaxle shifting will be more noticeable when Autostickt is engaged. • If a low range is selected and the engine accelerates to the rev limit, the transaxle will automatically select the next higher ratio. • If a downshift would cause the engine to over-speed, that shift will not occur until it is safe for the engine. Mostly the transaxle will stay in the manually selected ratio, however.
STARTING AND OPERATING WARNING! It is dangerous to shift the selector lever out of “P” or “N” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal.
STARTING AND OPERATING 285 PARKING BRAKE When the parking brake is applied with the ignition switch on, the brake light in the instrument cluster will turn on. NOTE: This light only shows that the parking brake is applied. It does not show the degree of brake application. Before leaving the vehicle, make sure that the parking brake is fully applied and place the gear selector in the Park position.
STARTING AND OPERATING added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on a uphill grade. The parking brake should always be applied when the driver is not in the vehicle. WARNING! • Always fully apply the parking brake when leaving your vehicle, or it may roll and cause damage or injury. Also be certain to leave an automatic transmission in Park, a manual transmission in Reverse or first gear.
STARTING AND OPERATING BRAKE SYSTEM Your vehicle is equipped with power assisted brakes as standard equipment. In the event power assist is lost for any reason (for example, repeated brake applications with the engine off), the brakes will still function. However, the effort required to brake the vehicle will be much greater than that required with the power system operating.
STARTING AND OPERATING Anti-Lock Brake System The Anti-Lock Brake System provides increased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to prevent wheel lock-up. WARNING! Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to an accident. Pumping makes the stopping distance longer. Just press firmly on your brake pedal when you need to slow down or stop.
STARTING AND OPERATING The ABS light monitors the Anti-Lock Brake System. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or comes on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on.
STARTING AND OPERATING • and a slight drop or fall away of the brake pedal at the end of the stop. These are all normal characteristics of ABS. WARNING! The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability. Installation of such equipment should be performed by qualified professionals.
STARTING AND OPERATING WARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to the power steering pump may occur.
STARTING AND OPERATING Traction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability. To reduce this possibility, the following precautions should be observed: 1. Slow down during rainstorms or when roads are slushy. 2. Slow down if road has standing water or puddles. 3.
STARTING AND OPERATING Shallow Standing Water Although your vehicle is capable of driving through shallow standing water, consider the following before doing so: 293 CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
STARTING AND OPERATING WARNING! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. TIRE SAFETY INFORMATION Tire Markings • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes.
STARTING AND OPERATING 295 • European Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter 9P9 is absent from this tire size designation. Example: 215/65R15 96H • Temporary Spare tires are high-pressure compact spares designed for temporary emergency use only. Tires designed to this standard have the letter “T” molded into the sidewall preceding the size designation.
STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards (....blank....( = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm) 65 = Aspect Ratio in Percent (%) —Ratio of section height to section width of tire. 10.
STARTING AND OPERATING 297 EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be achieved under specified operating conditions (i.e. tire pressure, vehicle loading, road conditions, and posted speed limits).
STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side then you will find it on the inboard side of the tire.
STARTING AND OPERATING Tire Loading and Tire Pressure 299 Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar.
STARTING AND OPERATING Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the “Tire and Loading Information” placard and in the “Vehicle Loading” section of this manual.
STARTING AND OPERATING 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
STARTING AND OPERATING
STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle. Three primary areas are affected by improper tire pressure: 303 1.
STARTING AND OPERATING 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Under inflation, also increases tire rolling resistance and results in higher fuel consumption. maximum loaded vehicle condition. These pressure conditions will be found in the “Supplemental Tire Pressure Information” section of this manual. 3.
STARTING AND OPERATING check tire pressure. Do not make a visual judgement when determining proper inflation. Radial tires may look properly inflated even when they are under inflated. CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.
STARTING AND OPERATING Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle operation.
STARTING AND OPERATING Compact Spare Tire — If Equipped The compact spare is for temporary emergency use with radial tires. It is engineered to be used on your style vehicle only. Since this tire has limited tread life, the original tire should be repaired (or replaced) and reinstalled at the first opportunity. WARNING! Temporary use spare tires are for emergency use only. With these tires, do not drive more than 50 mph (80 km/h). Temporary-use spare tires have limited tread life.
STARTING AND OPERATING original equipped tire on the front or rear axle of your vehicle, but it is not. Installation of this limited use spare tire affects vehicle handling. Since it is not the same tire, replace (or repair) the original tire and reinstall on the vehicle at the first opportunity. Tire Spinning When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck.
STARTING AND OPERATING Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. 309 These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 inch (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Many states have laws requiring tire replacement at this point.
STARTING AND OPERATING WARNING! Tires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have an accident resulting in serious injury or death. Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease, and gasoline.
STARTING AND OPERATING 311 WARNING! CAUTION! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have an accident resulting in serious injury or death.
STARTING AND OPERATING Improper alignment will not cause vehicle vibration. Vibration may be a result of tire and wheel out-ofbalance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear. TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type “Class S” specifications. Chains must be the proper size for the vehicle, as recommended by the chain manufacturer. NOTE: Do not use tire chains on a compact spare tire.
STARTING AND OPERATING NOTE: In order to avoid damage to tires, chains, and your vehicle do not drive for a prolonged period of time on dry pavement. Observe the tire chain manufacturer’s instructions on method of installation, operating speed, and conditions for usage. Always use the lower suggested operating speed if both the chain manufacturer and vehicle manufacture suggest a maximum speed. This notice applies to all chain traction devices, including link and cable (radial) chains.
STARTING AND OPERATING Follow the recommended tire rotation frequency for your type of driving found in the “Maintenance Schedules” Section of this manual. More frequent rotation is permissible if desired. The reasons for any rapid or unusual wear should be corrected prior to rotation being performed. The suggested rotation method is the “forward-cross” shown in the following diagram.
STARTING AND OPERATING The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low pressure warning threshold for any reason, including low temperature effects, or natural air pressure loss through the tire. The TPMS will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above recommended cold placard pressure.
STARTING AND OPERATING CAUTION! CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
STARTING AND OPERATING • The TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, using an accurate tire pressure gage, even if under-inflation has not reached the level to trigger illumination of the TPMS Telltale Lamp. • Seasonal temperature changes will affect tire pressure, and the TPMS will monitor the actual tire pressure in the tire.
STARTING AND OPERATING NOTE: The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) to receive this information. The TPMS Telltale Lamp will flash on and off for 75 seconds, and remain on solid when a system fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. The TPMS Telltale Lamp will turn off when the fault condition no longer exists.
STARTING AND OPERATING Basic TPMS with EVIC — If Equipped The TPMS uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the Receiver Module. NOTE: It is particularly important, for you to check the tire pressure in all of your tires regularly and too maintain the proper pressure.
STARTING AND OPERATING sequence will repeat, providing the system fault still exists. The TPMS Telltale Lamp will turn off when the fault condition no longer exists. A system fault can occur with any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPMS sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3.
STARTING AND OPERATING NOTE: It is particularly important, for you to check the tire pressure in all of your tires regularly and to maintain the proper pressure. The TPMS consists of the following components: • Receiver Module 321 Tire Pressure Monitoring Low Pressure Warnings The TPMS Telltale Lamp will illuminate in the instrument cluster, and an audible chime will be activated when one or more of the four active road tire pressures are low.
STARTING AND OPERATING NOTE: Low pressure in the spare or compact tire (which has no sensor and therefore not monitored) will not cause the TPMS Telltale Lamp to illuminate or the chime to sound. Should a low tire condition occur on any of the four active road tire(s), you should stop as soon as possible, and inflate the low tire(s) that is flashing on the graphic display to the vehicle’s recommended cold placard pressure value.
STARTING AND OPERATING 323 flash, the “SERVICE TIRE SYSTEM SOON” text message will not be present, and a pressure value will be displayed instead of dashes. A system fault can occur with any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPMS sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals.
STARTING AND OPERATING NOTE: • Your vehicle is equipped with a compact spare wheel and tire assembly that does not have a tire pressure monitoring sensor. Therefore, it will not be monitored by the TPMS. In the event that compact spare tire is swapped with a low pressure road tire, each ignition key cycle will still show the TPMS Lamp to be ON, a chime to sound, and the EVIC will still show the low tire pressure value flashing on the graphic display.
STARTING AND OPERATING FUEL REQUIREMENTS 3.8L GASOLINE ENGINES The 3.8L engine is designed to meet all emissions regulations and provide excellent fuel economy and performance when using high quality unleaded “regular” gasoline having an octane rating of 87. The use of premium gasoline is not recommended. Under normal conditions, the use of premium gasoline will not provide a benefit over high quality regular gasolines, and in some circumstances may result in poorer performance. 4.
STARTING AND OPERATING Over 40 automobile manufacturers around the world have issued and endorsed consistent gasoline specifications (the World Wide Fuel Charter, WWFC) to define fuel properties necessary to deliver enhanced emissions, engine performance, and durability for your vehicle. The manufacturer recommends the use of gasolines that meet the WWFC specifications if they are available.
STARTING AND OPERATING MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT. Gasoline blended with MMT reduces spark plug life and reduces emission system performance in some vehicles. The manufacturer recommends that gasoline without MMT be used in your vehicle.
STARTING AND OPERATING • An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service. Contact your dealer for service assistance. • The use of fuel additives which are now being sold as octane enhancers is not recommended. Most of these products contain high concentrations of methanol.
STARTING AND OPERATING • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. • Keep the liftgate closed when driving your vehicle to prevent carbon monoxide and other poisonous exhaust gases from entering the vehicle.
STARTING AND OPERATING WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the malfunction indicator light to turn on. • Failure to follow the above may result in serious injury or even death. NOTE: • Tighten the fuel filler cap until you hear a “clicking” sound.
STARTING AND OPERATING Tighten the fuel filler cap properly and press the odometer reset button to turn the gASCAP message off. • Make sure that the fuel filler cap is tightened each time the vehicle is refueled. • If the problem continues, the message will appear the next time the vehicle is started. See your authorized dealer service center as soon as possible. See Section 7 of this manual for more information.
STARTING AND OPERATING Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GAWR.
STARTING AND OPERATING Loading To load your vehicle properly, first figure out its empty weight, axle by axle and side by side. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items securely before driving. If weighing the loaded vehicle shows that you have exceeded either GAWR, but the total load is within the specified GVWR, you must redistribute the weight.
STARTING AND OPERATING Example Only Empty Weight Front Axle 2538 lbs (1151 kg) Load (Including driver, 223 lbs passengers and cargo) (101 kg) Total 2762 lbs (1253 kg) GAWR 2826 lbs (1282 kg) Rear Axle 2076 lbs (942 kg ) 890 lbs (404 kg) 2968 lbs (1346 kg) 3035 lbs (1377 kg) TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle.
STARTING AND OPERATING Gross Combination Weight Rating (GCWR) The gross combination weight rating (GCWR) is the total permissible weight of your vehicle and trailer when weighed in combination. (Note that GCWR ratings include a 150 lbs (68 kg) allowance for the presence of a driver). Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR.
STARTING AND OPERATING Weight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle. These kind of hitches are the most popular on the market today and they’re commonly used to tow small- and medium-sized trailers. Weight-Distributing Hitch A weight-distributing system works by applying leverage through spring (load) bars.
STARTING AND OPERATING 337 5 Weight Distributing Hitch System Improper Adjustment of Weight Distributing System
STARTING AND OPERATING Trailer Hitch Classification Your vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional Trailer Tow Prep Package. See your dealer for package content. The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition.
STARTING AND OPERATING 3.8L & 4.0L Automatic with Engine Oil Cooler GCWR (Gross ComMax. GTW (Gross Engine/Transmission Frontal Area bined Wt. Rating) Trailer Wt.) Up to 2 persons & 8,600 lbs (3 900 kg) 40 SQ. FT. Luggage 3,500 lbs (1 600 kg) 3.8L & 4.0L Auto3 to 4 persons & matic with Engine 8,600 lbs (3 900 kg) 40 SQ. FT. Luggage 3,000 lbs Oil Cooler (1 360 kg) 5 to 6 persons & 8,600 lbs (3 900 kg) 40 SQ. FT. Luggage 1,000 lbs (454 kg) Refer to local laws for maximum trailer towing speeds.
STARTING AND OPERATING 3.8L & 4.0L Automatic WITHOUT Engine Oil Cooler GCWR (Gross ComMax. GTW (Gross Engine/Transmission Frontal Area bined Wt. Rating) Trailer Wt.) Up to 2 persons & 7,700 lbs (3 492 kg) 40 SQ. FT. Luggage 2,600 lbs (1 179 kg) 3.8L & 4.0L Auto3 to 4 persons & matic WITHOUT 7,700 lbs (3 492 kg) 40 SQ. FT. Luggage 2,100 lbs Engine Oil Cooler (952 kg) 5 to 6 persons & N/A N/A Luggage NOT Recommended Refer to local laws for maximum trailer towing speeds.
STARTING AND OPERATING 341 Trailer and Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of the vehicle and trailer. Failure to load trailers heavier in front is the cause of many trailer accidents.
STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the Tire and Loading Information placard in the Tire Safety Information Section of this manual for the maximum combined weight of occupants and cargo for your vehicle.
STARTING AND OPERATING WARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have an accident. • When hauling cargo or towing a trailer, do not overload your vehicle or trailer.
STARTING AND OPERATING 4. Tongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). Towing Requirements — Tires − Do not attempt to tow a trailer while using a compact spare tire. − Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING − Trailer brakes are recommended for trailers over 1,000 lbs (454 kg) and required for trailers in excess of 2,000 lbs (907 kg). CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. 345 WARNING! Do not connect trailer brakes to your vehicle’s hydraulic brake lines.
STARTING AND OPERATING The Trailer Tow Package may include a 4 and 7 pin wiring harness. Use a factory approved trailer harness and connector. NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations.
STARTING AND OPERATING 347 Towing Tips — Automatic Transmission The “D” range can be selected when towing. However, if frequent shifting occurs while in this range, the “3” range should be selected. NOTE: Using the “3” range while operating the vehicle under heavy operating conditions will improve performance and extend transmission life by reducing excessive shifting and heat build up. This action will also provide better engine braking.
STARTING AND OPERATING Towing Tips — Electronic Speed Control (If Equipped) − Air Conditioning Turn off temporarily. − Don’t use in hilly terrain or with heavy loads. − refer to Cooling System Operating information in the Maintenance section of this manual for more information. − When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed.
WHAT TO DO IN EMERGENCIES CONTENTS m Hazard Warning Flasher . . . . . . . . . . . . . . . . . . 350 m Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . . 362 m If Your Engine Overheats . . . . . . . . . . . . . . . . . 351 m Towing A Disabled Vehicle . . . . . . . . . . . . . . . . 363 m Jacking And Tire Changing . . . . . . . . . . . . . . . . 352 ▫ With Ignition Key . . . . . . . . . . . . . . . . . . . . . 363 ▫ Jack Location . . . . . . . . . . . . . . . . . . . . . . . .
WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER To engage the Hazard Warning Flashers, depress the switch on the instrument panel. When the Hazard Warning Switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Push the switch a second time to turn off the flashers. CAUTION! This is an emergency warning system and should not be used when the vehicle is in motion.
WHAT TO DO IN EMERGENCIES NOTE: With extended use, the Hazard Warning Flashers may wear down your battery. IF YOUR ENGINE OVERHEATS In any of the following situations, you can reduce the potential for overheating by taking the appropriate action. • On the highways — Slow down. • In city traffic — While stopped, put transmission in neutral, but do not increase engine idle speed. NOTE: There are steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off.
WHAT TO DO IN EMERGENCIES WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7, Maintenance, of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph.
WHAT TO DO IN EMERGENCIES 353 Six Passenger Seating The jack and jack-handle are stowed in the rear storage bin located in the rear cargo floor. Pull up on the storage bin cover and liner to access the jack and jack tools.
WHAT TO DO IN EMERGENCIES Spare Tire Stowage Five Passenger Seating The spare tire is stowed under the rear of the vehicle by means of a cable winch mechanism. To remove or stow the spare, use the jack handle to rotate the “spare tire drive” nut. The nut is located under the plastic cover at the center rear of the cargo floor area, just inside the liftgate opening. Six Passenger Seating The spare tire is stowed under the rear of the vehicle by means of a cable winch mechanism.
WHAT TO DO IN EMERGENCIES 355 CAUTION! WARNING! The winch mechanism is designed for use with the jack handle only. Use of an air wrench or other power tools is not recommended and can damage the winch. Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. When the spare is clear, tilt the retainer at the end of the cable and pull it through the center of the wheel.
WHAT TO DO IN EMERGENCIES Jacking Instructions WARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • The jack is designed to use as a tool for changing tires only.
WHAT TO DO IN EMERGENCIES 357 1. Remove the spare wheel, scissors jack and jack-handle from stowage. 2. Carefully pry off the wheel center cap if equipped, using the tip of the jack handle. 3. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. NOTE: Do not oil wheel studs. For chrome wheels, do not substitute with chrome plated wheel nuts. 4.
WHAT TO DO IN EMERGENCIES location. Do not raise the vehicle until you are sure the jack is securely engaged. Never jack up the vehicle using any suspension components. 7. Remove the wheel lug nuts, for vehicles with wheel covers, remove the cover from the wheel by hand. Do not pry the wheel cover off. Then pull the wheel off the hub. 6. Raise the vehicle by turning the jack screw to the right, using the swivel wrench.
WHAT TO DO IN EMERGENCIES lug nuts until each nut has been tightened twice. Correct wheel nut tightness is 130 N·m (95 ft. lbs). If in doubt about the correct tightness, have them checked with a torque wrench by your dealer or at a service station. 11. Lower the jack to its fully closed position. WARNING! A loose tire or jack, thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided.
WHAT TO DO IN EMERGENCIES NOTE: When reinstalling the wheel center cap, insure that the valve stem symbol on the back of the cap is pointed toward the wheel valve stem. Install the center cap using hand pressure only. Do not use a hammer. Wheel Nuts All wheel nuts should be tightened occasionally to eliminate the possibility of wheel studs being sheared or the bolt holes in the wheels becoming elongated.
WHAT TO DO IN EMERGENCIES When jump starting, proceed as follows: 1. Wear eye protection and remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. 2. When boost is provided by a battery in another vehicle, park that vehicle within booster cable reach and without letting the vehicles touch. Set the parking brake, place the automatic transmission in PARK and turn the ignition switch to the OFF position for both vehicles. 3.
WHAT TO DO IN EMERGENCIES WARNING! WARNING! Do not connect the cable to the negative post of the discharge battery. The resulting electrical spark could cause the battery to explode. Any procedure other than above could result in: During cold weather when temperatures are below freezing point, electrolyte in a discharged battery may freeze. Do not attempt jump starting because the battery could rupture or explode.
WHAT TO DO IN EMERGENCIES and Drive. Usually the least accelerator pedal pressure to maintain the rocking motion without spinning the wheels is most effective. WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck. And don’t let anyone near a spinning wheel, no matter what the speed.
WHAT TO DO IN EMERGENCIES operative, or if the vehicle is to be towed more than 100 miles (160 km), the vehicle must be towed with the front wheels off the ground. All Wheel Drive Your vehicle may be towed under the following conditions: The gear selector must be in NEUTRAL, the distance to be traveled must not exceed 100 miles (160 km), the towing speed must not exceed 44 mph (72 km/h), and both front and rear wheels must be on the ground.
WHAT TO DO IN EMERGENCIES If it is necessary to use the accessories while being towed (wipers, defrosters, etc.), the key must be in the ON position, not the ACCESSORY position. Make certain the transmission remains in NEUTRAL. Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position. The only approved method of towing with out the ignition key is with a flat bed truck. Proper towing equipment is necessary to prevent damage to the vehicle.
MAINTAINING YOUR VEHICLE CONTENTS m 3.8L Engines . . . . . . . . . . . . . . . . . . . . . . . . . . 370 ▫ Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 376 m 4.0L Engines . . . . . . . . . . . . . . . . . . . . . . . . . . 371 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . . 379 m Onboard Diagnostic System — OBD II . . . . . . . . 372 ▫ Drive Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . 379 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE ▫ Front & Rear Suspension Ball Joints . . . . . . . . 385 ▫ Automatic Transmission . . . . . . . . . . . . . . . . 398 ▫ Steering Shaft Seal . . . . . . . . . . . . . . . . . . . . 385 ▫ All Wheel Drive (AWD) — If Equipped . . . . . 400 ▫ Steering Linkage . . . . . . . . . . . . . . . . . . . . . . 386 ▫ Front And Rear Wheel Bearings . . . . . . . . . . . 401 ▫ Drive Shaft Universal Joints . . . . . . . . . . . . . . 386 ▫ Appearance Care And Protection From Corrosion .
MAINTAINING YOUR VEHICLE ▫ Front Park/Turn Signal And Sidemarker Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413 ▫ Front Fog Light . . . . . . . . . . . . . . . . . . . . . . 414 ▫ Rear Tail, Stop, Turn Signal, Side Marker And Back-Up Lights . . . . . . . . . . . . . . . . . . . . . . . 415 369 m Fluids And Capacities . . . . . . . . . . . . . . . . . . . 416 m Fluids, Lubricants And Genuine Parts . . . . . . . . 417 ▫ Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 3.8L ENGINES Engine Compartment 3.
MAINTAINING YOUR VEHICLE 371 4.0L ENGINES 7 Engine Compartment 4.
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
MAINTAINING YOUR VEHICLE Loose Fuel Filler Cap Message Should the “Loose Fuel Filler Cap” or “gASCAP” message appear, there may be a problem in the evaporative system. Before taking the vehicle into a qualified Dealership Service center, check first to see if the fuel filler cap is possibly loose, improperly installed, or damaged. A loose fuel filler cap message will be displayed in the instrument cluster. Tighten the gas cap until a 9clicking9 sound is heard.
MAINTAINING YOUR VEHICLE Your vehicle has a simple ignition key actuated test, which you can use prior to going to the test station. To check if your vehicle’s OBD system is ready, you must do the following: 1. Insert your ignition key into the ignition switch. 2. Turn the ignition to the ON position, but do not crank or start the engine. 3. If you crank or start the engine, you will have to start this test over. 4.
MAINTAINING YOUR VEHICLE 375 vehicle serviced before going to the I/M station. The I/M station can fail your vehicle because the MIL symbol is on with the engine running. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. REPLACEMENT PARTS Use of genuine Mopart parts for normal/scheduled maintenance and repairs is highly recommended to insure the designed performance.
MAINTAINING YOUR VEHICLE MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides the maintenance items for which there are fixed maintenance intervals, there are other items that should operate satisfactorily without periodic maintenance. However, if a malfunction of these items does occur, it could adversely affect the engine or vehicle performance.
MAINTAINING YOUR VEHICLE 377 Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” in Section 8 of this manual for information on this system. NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or 6 months, whichever occurs first. Engine Oil Dipstick CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure.
MAINTAINING YOUR VEHICLE American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils. Engine Oil Viscosity (SAE Grade) — 3.8 Liter Engines SAE 5W-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy.
MAINTAINING YOUR VEHICLE Materials Added to Engine Oil The manufacture strongly recommends against the addition of any additives (other than leak detection dyes) to the engine oil. Engine oil is an engineered product and it’s performance may be impaired by supplemental additives. Disposing of Used Engine Oil And Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can present a problem to the environment.
MAINTAINING YOUR VEHICLE plug. Malfunctioning spark plugs can damage the catalytic converter. For proper type of replacement spark plugs, refer to the “Vehicle Emission Control Information” label in the engine compartment. Engine Air Cleaner Filter Refer to the “Maintenance Schedule” in Section 8 of this manual for engine air cleaner filter maintenance intervals. NOTE: Be sure to follow the “dusty or off-road conditions” maintenance interval if applicable.
MAINTAINING YOUR VEHICLE 381 Under normal operating conditions, the catalytic converter will not require maintenance. However, it is important to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. CAUTION! A hot exhaust system can start a fire if you park over materials that can burn.
MAINTAINING YOUR VEHICLE To minimize the possibility of catalyst damage: • Do not shut off the engine or interrupt the ignition when the transmission is in gear and the vehicle is in motion. • Do not try to start engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very rough idling or malfunctioning operating conditions.
MAINTAINING YOUR VEHICLE CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion. • If a “fast charger” is used while battery is in vehicle, disconnect both vehicle battery cables before connecting the charger to battery.
MAINTAINING YOUR VEHICLE WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the Warranty Information book for further warranty information. • The air conditioning system contains refrigerant under high pressure.
MAINTAINING YOUR VEHICLE Refer to the “Maintenance Schedule” section of this manual for the recommended air conditioning filter replacement intervals. Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticipated. Coordinate inspection efforts through a certified DaimlerChrysler Dealership.
MAINTAINING YOUR VEHICLE Steering Linkage The tie rod end ball joints are permanently lubricated and do not require periodic maintenance. Drive Shaft Universal Joints Your vehicle has constant velocity universal joints. Periodic lubrication of these joints is not required. However, the joint boots should be inspected for external leakage or damage when other maintenance is performed. If leakage or damage is evident, the universal joint boot and grease should be replaced immediately.
MAINTAINING YOUR VEHICLE Windshield Wiper Blades The rubber edges of the wiper blades and the windshield should be cleaned periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt or road film. 387 washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water. The washer fluid reservoir will hold a full gallon of fluid when the Low Washer Fluid Light illuminates.
MAINTAINING YOUR VEHICLE Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts.
MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • You or others can be badly burned by hot coolant or steam from your radiator. If you see or hear steam coming from under the hood, don’t open the hood until the radiator has had time to cool.
MAINTAINING YOUR VEHICLE drain from the coolant recovery bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT. Cooling System — Drain, Flush and Refill At the intervals shown on the Maintenance Schedules, the system should be drained, flushed and refilled. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals.
MAINTAINING YOUR VEHICLE Adding Engine Coolant Your vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Years or 100,000 miles before replacement. To prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. Please review these recommendations for using Hybrid Organic Additive Technology (HOAT) coolant.
MAINTAINING YOUR VEHICLE WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To prevent scalding or injury, do not remove the pressure cap while the system is hot or under pressure. • Do not use a pressure cap other than the one specified for your vehicle.
MAINTAINING YOUR VEHICLE When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points To Remember NOTE: When the vehicle is stopped after a few miles (a few kilometers) of operation, you may observe vapor coming from the front of the engine compartment.
MAINTAINING YOUR VEHICLE • Do not change the thermostat for summer or winter operation. If replacement is ever necessary, install ONLY the correct type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions. Hoses And Vacuum/Vapor Harnesses Inspect surfaces of hoses and nylon tubing for evidence of heat and mechanical damage.
MAINTAINING YOUR VEHICLE WARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You wouldn’t have your full braking capacity in an emergency. Brake And Power Steering Hoses When the vehicle is serviced for scheduled maintenance, inspect surface of hoses and nylon tubing for evidence of heat and mechanical damage.
MAINTAINING YOUR VEHICLE should be replaced immediately! Eventual deterioration of the hose can take place resulting in a possibility of a burst failure. Clean the top of the master cylinder area before removing the cap. Add fluid to bring the level up to the top of the “FULL” mark on the side of the master cylinder reservoir. WARNING! Overfilling of fluid is not recommended because it may cause leaking in the system. Worn brake hoses can burst and cause brake failure. You could have an accident.
MAINTAINING YOUR VEHICLE 397 WARNING! CAUTION! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. Do not allow petroleum base fluid to contaminate the brake fluid, all brake seal components could be damaged causing partial or complete brake failure. • Use of brake fluid that may have a lower initial boiling point or unidentified as to specification, may result in sudden brake failure during hard prolonged braking.
MAINTAINING YOUR VEHICLE Care should be taken in installing quick connect fittings to insure they are properly installed and fully connected. See your authorized dealer for service. for correct fluid type. It is important that the transmission fluid be maintained at the prescribed level using the recommended fluid. Automatic Transmission The automatic transmission and differential assembly are contained within a single housing.
MAINTAINING YOUR VEHICLE 399 4. Place the gear selector momentarily in each gear position ending with the lever in P (PARK). Wipe the area around the dipstick clean to eliminate the possibility of dirt entering the transmission. Procedure For Checking Fluid Level The fluid level in the automatic transmission should be checked whenever the vehicle is serviced. Operation with an improper fluid level will greatly reduce the life of the transmission and of the fluid.
MAINTAINING YOUR VEHICLE If the fluid level indicates low, add sufficient fluid to bring to the proper level. NOTE: Refer to Section 8 of this manual for Maintenance Schedules. CAUTION! If the transmission is disassembled for any reason, the fluid and filter should be changed. Do not overfill. Dirt and water in the transmission can cause serious damage.
MAINTAINING YOUR VEHICLE Power Transfer Unit The fill plug is located on the side of the power transfer unit housing. The fluid should be maintained at a level even with the bottom of the fill plug hole when the vehicle is parked on a level surface. If it becomes necessary to add or replace the fluid, use only the manufacturers recommended fluid, refer to Fluids, Lubricants and Genuine Parts for correct fluid type. Rear Carrier The fill plug is located on the side of the rear carrier housing.
MAINTAINING YOUR VEHICLE hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and underbody protection. The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. What Causes Corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes are: • Road salt, dirt and moisture accumulation.
MAINTAINING YOUR VEHICLE CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. • It is important that the drain holes in the lower edges of the doors, rocker panels and trunk be kept clear and open. • If you detect any stone chips or scratches in the paint, touch them up immediately.
MAINTAINING YOUR VEHICLE heavy soil and/or excessive brake dust, use Mopart Wheel Cleaner (05066247AB) or equivalent or select a nonabrasive, non-acidic cleaner. Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Only Mopart or equivalent is recommended. Do not use oven cleaner. Avoid automatic car washes that use acidic solutions or harsh brushes that may damage the wheels’ protective finish.
MAINTAINING YOUR VEHICLE YES Essentialst Fabric Cleaning Procedure – If Equipped YES Essentialst seats may be cleaned in the following manner: • Remove as much of the stain as possible by blotting with a clean, dry towel. • Blot any remaining stain with a clean, damp towel. • For tough stains, apply Mopart Total Clean or a mild soap solution to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue.
MAINTAINING YOUR VEHICLE 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp rag. 2. Dry with a soft tissue. Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the belts need cleaning, use a mild soap solution or lukewarm water.
MAINTAINING YOUR VEHICLE FUSES (INTEGRATED POWER MODULE) Cavity 1 2 3 4 5 6 Integrated Power Module (IPM) An Integrated Power Module (IPM) is located in the engine compartment near the battery. This center contains maxi fuses, mini fuses and relays. A label that identifies each component is printed on the inside of the cover.
MAINTAINING YOUR VEHICLE Cavity 9 10 11 12 13 14 15 40 41 Cartridge Fuse 40 Amp Green Spare 40 Amp Green Spare 40 Amp Green Spare 40 Amp Green 40 Amp Green 40 Amp Green Description Cavity Power Sunroof 42 Headlight Washer, Power Liftgate Cavity 24 Radiator Fan 1 25 Anti-Lock Brake System (ABS) Module Driver Door Node Passenger Door Node 26 27 28 Cartridge Fuse 40 Amp Green Description Front Blower Mini Fuse Description 20 Amp Yel- Power Outlet (Selectable) low 15 Amp Blue Radio, Amplifie
MAINTAINING YOUR VEHICLE Cavity 29 Mini Fuse 20 Amp Yellow 30 31 10 Amp Red 20 Amp Yellow Spare Spare 20 Amp Yellow 25 Amp Natural 20 Amp Yellow 20 Amp Yellow 34 35 36 37 38 39 Description Cluster, CHMSL, Stop Lights, Anti-Lock Brake System (ABS) Ignition Switch Hazard Cavity 44 45 46 47 Electronic Automatic Transaxle (EATX) Solenoid ASD 48 Fuel Pump 49 A/C Clutch, MTV 50 Mini Fuse 25 Amp Natural 10 Amp Red 409 Description Rear Heated Seats Anti-Lock Brake System (ABS) Ignition Run Passenger
MAINTAINING YOUR VEHICLE CAUTION! • When installing the Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
MAINTAINING YOUR VEHICLE REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb Number Center & Rear Reading Lights . . . . . . . . . . . . . . . 578 Front Door Courtesy Light . . . . . . . . . . . . . . . . . . 578 Liftgate Light(s). . . . . . . . . . . . . . . . . . . . . . . . . . 578 Overhead Console Reading Lights . . . . . . . . . . . 212–2 Visor Vanity Lights. . . . . . . . . . . . . . . . . . . . . V26377 NOTE: For lighted switches, see your dealer for replacement instructions.
MAINTAINING YOUR VEHICLE BULB REPLACEMENT Headlights 1. Open hood, disconnect and isolate the battery negative cable. 2. Remove the two screws securing the headlight module to the vehicle and gently pull the headlight module forward away from the vehicle, disengaging the assembly from the lower attachment clip. 3. Disconnect the electrical connector. 4. Remove the rubber boot seal. 5. Rotate the bulb to the left and replace the bulb. Reinstall the rubber boot seal and then the headlight module.
MAINTAINING YOUR VEHICLE High Intensity Discharge Headlights (HID) — If Equipped The headlights are a type of high voltage discharge tube. High voltage can remain in the circuit even with the headlight switch off and the key removed. Because of this, you should not attempt to service a headlight bulb yourself. If a headlight bulb fails, take your vehicle to an authorized dealer for service. 413 on there is a blue hue to the lights.
MAINTAINING YOUR VEHICLE 2. Remove the two screws securing the headlight module to the vehicle and pull the headlight module forward away from the vehicle, disengaging the assembly from the lower attachment clip. 3. Twist the bulb socket to remove from the headlight module and pull the bulb from socket. 4. Replace the bulb, reinstall the socket and then reinstall the headlight module. Front Fog Light 1. Reach under the front fascia and grasp the front fog light bulb. 2.
MAINTAINING YOUR VEHICLE 415 Rear Tail, Stop, Turn Signal, Side Marker and Back-up Lights 3. Twist the socket assembly to remove it from the housing. 1. Raise the liftgate. 4. Pull the bulb out of the socket. 2. Remove the two tail light assembly screws and rotate the assembly outward to remove the ball stud form the attaching grommet. 5. Replace the bulb, reinstall the socket, and reattach the tail light assembly. License Light 1.
MAINTAINING YOUR VEHICLE FLUIDS AND CAPACITIES Fuel All Engines Engine Oil-With Filter 4.0 Liter Engines (SAE 10W-30, API Certified) 3.8 Liter Engines (SAE 5W-20, API Certified) Cooling System * 4.0 Liter Engines (Mopart Antifreeze/Coolant 5 Year/100,000 Mile Formula or equivalent) 3.8 Liter Engines (Mopart Antifreeze/Coolant 5 Year/100,000 Mile Formula or equivalent) * Includes heater and coolant recovery bottle filled to MAX level. U.S. 23 gallons Metric 87 liters 5.5 qts 5.0 qts 5.2 liters 4.
MAINTAINING YOUR VEHICLE 417 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant 3.8 Liter Engine Oil 4.0 Liter Engine Oil Oil Filter, 3.8L & 4.0L Engines Spark Plugs 3.8L & 4.0L Engines Fuel Selection 3.8L Fuel Selection 4.0L Fluids, Lubricants and Genuine Parts Mopart Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent Use API Certified SAE 5W-20 engine oil.
MAINTAINING YOUR VEHICLE Chassis Component Automatic Transmission AWD Power Transfer Unit AWD Rear Carrier Brake Master Cylinder Power Steering Reservoir Fluids, Lubricants and Genuine Parts Mopart ATF+4 Automatic Transmission Fluid. Mopart Gear Lubricant 75W-90 or equivalent. Mopart Gear Lubricant 75W-90 or equivalent. Mopart DOT 3 and SAE J1703 should be used or equivalent. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids.
MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance . . . . . . . . 420 m Maintenance Schedule . . . . . . . . . . . . . . . . . . . 420 ▫ Required Maintenance Intervals . . . . . . . . . . .
M A I N T E N A N C E 420 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
MAINTENANCE SCHEDULES NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been 6 months since your last oil change even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10,000 km) or 6 months, whichever comes first.
M 422 MAINTENANCE SCHEDULES A I • Check the fluid levels of coolant reservoir, brake N master cylinder, power steering and transmission and T E add as needed. N A • Check all lights and other electrical items for correct N operation. C E S C H E D U L E S 8 At Each Oil Change • Change the engine oil filter. • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle.
MAINTENANCE SCHEDULES 423 M Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Change the engine oil and engine oil filter. Rotate Tires. If using your vehicle for dusty or off-road conditions, inspect the engine air cleaner filter, replace if necessary. Inspect the brake linings, replace if necessary. Replace the air conditioning filter. Inspect the CV Joints.
M 424 MAINTENANCE SCHEDULES A I N T E N Maintenance Items A N Change Rear Drive Assembly (RDA) fluid. C Change Power Transfer Unit (PTU) fluid. E S C H E D U L E S 8 Change the automatic transmission fluid & filter if using your vehicle for any of the following: police, taxi, fleet or frequent trailer towing. Inspect and replace PCV valve if necessary. Flush and replace the engine coolant. Replace the ignition cables on 3.3L and 3.8L engines. Replace the spark plugs on 3.8L, 4.0L engines.
MAINTENANCE SCHEDULES WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS m Suggestions For Obtaining Service For Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428 ▫ Prepare For The Appointment . . . . . . . . . . . . 428 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 428 m Reporting Safety Defects . . . . . . . . . . . . . . . . . . 431 ▫ In Canada . . . . . . . . . . . . . . . . . . . . . . . . . . 432 m Publication Order Forms . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty, discuss additional charges with the service manager. Keep a maintenance log of your vehicle’s service history. This can often provide a clue to the current problem.
IF YOU NEED CONSUMER ASSISTANCE technicians, special tools, and the latest information to assure your vehicle is fixed correctly and in a timely manner. This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its Customer Center. Any hearing or speech impaired customer who has access to a TDD or a conventional teletypewriter (TTY) in the United States can communicate with the manufacturer by dialing 1–800–380–CHRY.
IF YOU NEED CONSUMER ASSISTANCE WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. WARRANTY INFORMATION (U.S.
IF YOU NEED CONSUMER ASSISTANCE To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), or go to http://www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. You can also obtain other information about motor vehicle safety from http:// www.safercar.gov. In Canada: If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately.
IF YOU NEED CONSUMER ASSISTANCE • Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix problems on computercontrolled vehicle systems and features. They show exactly how to find and correct problems the first time, using step-by-step troubleshooting and driveability procedures, proven diagnostic tests and a complete list of all tools and equipment. • Owner’s Manuals.
IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories established by the National highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car. All Passenger Car Tires Must Conform to Federal Safety Requirements in Addition to These Grades.
IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
INDEX Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 Adding Washer Fluid . . . . . . . . . . . . . . . . . . 142,387 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 327 Adjustable Pedals . . . . . . . . . . . . . . . . . . . . . . . 159 Air Conditioner Maintenance . . . . . . . . . . . . . . . 383 Air Conditioning . . . . . . . . . . . . . . . . . . . . . 251,256 Air Conditioning Controls . . . . . . . . . . . . . . . . . 251 Air Conditioning Filter . . . . . .
INDEX Reset Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 280 Selection Of Lubricant . . . . . . . . . . . . . . . . 398,418 Shifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281 Special Additives . . . . . . . . . . . . . . . . . . . . . . 400 Automatic Transmission . . . . . . . . . . . . . . . . 398,400 Adding Fluid . . . . . . . . . . . . . . . . . . . . . . 399,400 Fluid and Filter Changes . . . . . . . . . . . . . . . . . 400 Fluid Change . . . . . . . . . . . . . . . . .
INDEX Caps, Filler Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . . . 378 Radiator (Coolant Pressure) . . . . . . . . . . . . . . . 391 Car Washes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402 Carbon Monoxide Warning . . . . . . . . . . . . . . . . . 328 Cargo Area Cover . . . . . . . . . . . . . . . . . . . . . . . 176 Cargo Compartment Luggage Carrier . . . . . . . . . . . . . . . . . . . . . . .
INDEX Console, Overhead . . . . . . . . . . . . . . . . . . . . . . . 168 Contract, Service . . . . . . . . . . . . . . . . . . . . . . . . 430 Coolant Pressure Cap (Radiator Cap) . . . . . . . . . . 391 Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . 389 Adding Coolant (Antifreeze) . . . . . . . . . . . . . . 391 Coolant Capacity . . . . . . . . . . . . . . . . . . . . . . 416 Coolant Level . . . . . . . . . . . . . . . . . . . . . . 389,392 Disposal of Used Coolant . . . . . . . . . . .
INDEX Drive Belts . . . . . . . . . . . . . . . . . . . . . . . . . . Drive Shaft Universal Joints . . . . . . . . . . . . . . Driving On Slippery Surfaces . . . . . . . . . . . . . . . . . . Through Flowing, Rising, or Shallow Standing Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . DVD Player (Video Entertainment System) . . . . . . 379 . . 386 . . 291 . . 292 . . 232 Electric Remote Mirrors . . . . . . . . . . . . . . . . . . . . 88 Electrical Power Outlets . . . . . . . . . . . . .
INDEX Oil Change Interval . . . . . . . . . . . . . . . 192,202,377 Oil Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . 379 Oil Filler Cap . . . . . . . . . . . . . . . . . . . . . . . . . 378 Oil Filter Disposal . . . . . . . . . . . . . . . . . . . . . . 379 Oil Selection . . . . . . . . . . . . . . . . . . . . . . . 377,416 Oil Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . 378 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Overheating . . . . . . . . . .
INDEX Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . . . 362 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 Adding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 Additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327 Clean Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326 Filler Cap (Gas Cap) . . . . . . . . . . . . . . . . . . . . 329 Gasoline . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 Gauge . . . . .
INDEX Hazard Warning Flasher . . . . . . . . . . . . . . . . Head Phones . . . . . . . . . . . . . . . . . . . . . . . . Head Restraints . . . . . . . . . . . . . . . . . . . . . . Headlights . . . . . . . . . . . . . . . . . . . . . . . . . Bulb Replacement . . . . . . . . . . . . . . . . . . . High Beam . . . . . . . . . . . . . . . . . . . . . . . . High Beam/Low Beam Select Switch . . . . . Passing . . . . . . . . . . . . . . . . . . . . . . . . . . Replacing . . . . . . . . . . . . . . . . . . . . . .
INDEX Jack Location . . . . . . . . . . . . . . . . . . . . . . . . . . . 352 Jack Operation . . . . . . . . . . . . . . . . . . . . . . . 352,356 Jacking Instructions . . . . . . . . . . . . . . . . . . . . . . 356 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . . 360 Key, Programming . . . . . Key, Replacement . . . . . Key, Sentry (Immobilizer) Key-In Reminder . . . . . . Keyless Entry System . . . Keys . . . . . . . . . . . . . . Knee Bolster . . . . . . . . . . . . . . . . . . .
INDEX Hazard Warning Flasher . . . . . . . . . . . . . . . . . 350 Headlight Switch . . . . . . . . . . . . . . . . . . . . . . 136 Headlights . . . . . . . . . . . . . . . . . . . . . 136,412,413 High Beam Indicator . . . . . . . . . . . . . . . . . . . . 193 Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . . 20 Instrument Cluster . . . . . . . . . . . . . . . . . . . . . 136 Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 License . . . . . . . . . . . . . . . . . . . .
INDEX Maintenance Free Battery . . . . . . . . . . . . . . . . . . 382 Maintenance Procedures . . . . . . . . . . . . . . . . . . . 376 Maintenance Schedule . . . . . . . . . . . . . . . . . . . . 420 Maintenance, Sunroof . . . . . . . . . . . . . . . . . . . . . 172 Malfunction Indicator Light (Check Engine) . . 193,373 Manual, Service . . . . . . . . . . . . . . . . . . . . . . . . . 432 Map/Reading Lights . . . . . . . . . . . . . . . . . . . . . 168 Memory Feature (Memory Seat) . . . . . . . . . .
INDEX Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379,417 Filter Disposal . . . . . . . . . . . . . . . . . . . . . . . . 379 Identification Logo . . . . . . . . . . . . . . . . . . . . . 378 Materials Added to . . . . . . . . . . . . . . . . . . . . . 379 Recommendation . . . . . . . . . . . . . . . . . . . 377,416 Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378 Viscosity . . . . . . . . . . . . . . . . . . . . . . . . . . 378,416 Onboard Diagnostic System . . . .
INDEX Preparation for Jacking . . . . . . . . . . . . . . . . . . . . 355 Pretensioners Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Programmable Electronic Features . . . . . . . . . 147,203 Programming Transmitters (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24,147 Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . . . . . 306 Radiator Cap (Coolant Pressure Cap) . . . . . . . 390,391 Radio Broadcast Signals . . . . . . . . . .
INDEX Rocking Vehicle When Stuck . . . . . . . . . . . . . . . . 362 Roof Rack (Luggage Rack) . . . . . . . . . . . . . . . . . 178 Rotation, Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 313 Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . 79 Safety Checks Outside Vehicle . . . . . . . . . . . . . . . 80 Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 431 Safety, Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . 37 Safety Information, Tire . . . . . . . . .
INDEX Sentry Key Programming . . . . . . . . . . . . . . . . . . . 17 Service Assistance . . . . . . . . . . . . . . . . . . . . . . . 428 Service Contract . . . . . . . . . . . . . . . . . . . . . . . . . 430 Service Engine Soon Light (Malfunction Indicator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Service Manuals . . . . . . . . . . . . . . . . . . . . . . . . 432 Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . 209 Shoulder Belts . . . . . . . . . . . . . . . .
INDEX System, Navigation . . . . . . . . . . . . . . . . . . . . . . 244 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 Temperature Control, Automatic (ATC) . . . . . . . . 259 Temperature Gauge, Engine Coolant . . . . . . . 187,351 Tether Anchor, Child Restraint . . . . . . . . . . . . . 71,74 Tie Down Hooks, Cargo . . . . . . . . . . . . . . . . . . . 177 Tilt Steering Column . . . . . . . . . . . . . . . . . . . . . 143 Tire and Loading Information Placard . . . . . . . . .
INDEX Disabled Vehicle . . . . . . . . . . . . . . . . . . . . . . . 363 Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338 Recreational . . . . . . . . . . . . . . . . . . . . . . . 348,365 Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338 Traction Control . . . . . . . . . . . . . . . . . . . . . . 154,190 Traction Control Switch . . . . . . . . . . . . . . . . . . . 154 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Universal Transmitter . . . . . . . Unleaded Gasoline . . . . . . . . . Untwisting Procedure, Seat Belt Upholstery Care . . . . . . . . . . . . . . . . . . . . . . . . 146 . . . . . . . . . . . . . . 325 . . . . . . . . . . . . . . 45 . . . . . . . . . . . . . . 404 Vanity Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Variance, Compass . . . . . . . . . . . . . . . . . . . . . . . 207 Vehicle Certification Label . . . . . . . . . . . . . . . . .
INDEX Wipers, Intermittent . . . . . . . . . . . . . . . . . . . . . . 141 YES Essentialst Fabric Cleaning Procedure . . . . . . 405 Zone Control (Temperature Control) . . . . . . . . . .
INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS/ALTERATIONS THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key RemovalKey-In-Ignition ReminderLocking Doors With The KeySTEERING WHEEL LOCK - IF EQUIPPED If You Wish To Manually Lock The Steering WheelTo Release The Steering Wheel LockAutomatic Transaxle Ignition Interlock SystemSENTRY KEY - IF EQUIPPED Replacement KeysCustomer Key ProgrammingGeneral Informa
