2013 OWNER’S MANUAL 300 SRT 8
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. This manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS 䡵 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . .4 䡵 VEHICLE IDENTIFICATION NUMBER . . . . . . . .6 䡵 HOW TO USE THIS MANUAL . . . . . . . . . . . . . .4 䡵 VEHICLE MODIFICATIONS/ALTERATIONS . . . .7 䡵 WARNINGS AND CAUTIONS . . . . . . . . . . . . . .
4 INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained techniLLC vehicle. Be assured that it represents precision cians and genuine parts, and cares about your satisfaction. workmanship, distinctive styling, and high quality - all HOW TO USE THIS MANUAL essentials that are traditional to our vehicles.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information. Observe all Warnings and Cautions. VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is on the left front corner of the instrument panel.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A WORD ABOUT YOUR KEYS . . . . . . . . . . . . .12 ▫ Rearming Of The System . . . . . . . . . . . . . . . . .18 ▫ Keyless Ignition Node (KIN) . . . . . . . . . . . . . .12 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . . .19 ▫ Key Fob . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 ▫ To Disarm The System . . . . . . . . . . . . . . . . . . .19 ▫ Ignition Or Accessory On Message . . . . . . . . . .15 ▫ Tamper Alert . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . .24 䡵 WINDOWS . . . . . . . . . . . . . . . . . . . . . . . . . . .39 ▫ Programming Additional Transmitters. . . . . . . .24 ▫ Power Windows . . . . . . . . . . . . . . . . . . . . . . .39 ▫ Transmitter Battery Replacement . . . . . . . . . . .24 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . .42 ▫ General Information . . . . . . . . . . . . . . . . . . . .26 䡵 TRUNK LOCK AND RELEASE .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Seat Belt Pretensioners . . . . . . . . . . . . . . . . . .55 䡵 SRT ENGINE BREAK-IN RECOMMENDATIONS . . . . . . . . . . . . . . . . . . .94 ▫ Enhanced Seat Belt Use Reminder System (BeltAlert®) . . . . . . . . . . . . . . . . . . . . . . . . . .56 䡵 SAFETY TIPS . . . . . . . . . . . . . . . . . . . . . . . . . .95 ▫ Seat Belts And Pregnant Women . . . . . . . . . . .57 ▫ Transporting Passengers. . . . . . . . . . . . . . . . . .95 ▫ Seat Belt Extender . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Keyless Ignition Node (KIN) has four operating positions, three of which are labeled and will illuminate Your vehicle uses a keyless ignition system. This system when in position. The three positions are OFF, ACC, and consists of a Key Fob with Remote Keyless Entry (RKE) ON/RUN. The fourth position is START, during start transmitter and a Keyless Ignition Node (KIN). RUN will illuminate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Key Fob The Key Fob also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the Key Fob go dead. The emergency key is also for locking the glove box. You can keep the emergency key with you when valet parking.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To remove the emergency key, slide the mechanical latch on the back of the Key Fob sideways with your thumb and then pull the key out with your other hand. Emergency Key Removal NOTE: You can insert the double-sided emergency key into the lock cylinders with either side up.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Ignition Or Accessory On Message Opening the driver’s door when the ignition is in ACC or ON (engine not running), a chime will sound to remind you to cycle the ignition to OFF. In addition to the chime, the ignition or accessory on message will display in the cluster.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. The system uses a Key Fob with Remote Keyless Entry (RKE) transmitter, a Keyless Ignition Node (KIN) and a RF receiver to prevent unauthorized vehicle operation. Therefore, only Key Fobs that are programmed to the vehicle can be used to start and operate the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 CAUTION! CAUTION! The Sentry Key® Immobilizer system is not compatible with some after-market remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. • Always remove the Key Fobs from the vehicle and lock all doors when leaving the vehicle unattended. • For vehicles equipped with Keyless Enter-N-Go™, always remember to place the ignition in the OFF position.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: When having the Sentry Key® Immobilizer Sys- VEHICLE SECURITY ALARM — IF EQUIPPED tem serviced, bring all vehicle keys with you to an The Vehicle Security Alarm monitors the vehicle doors authorized dealer. for unauthorized entry and the ignition switch (and Keyless Enter-N-Go™ Start/Stop button) for unauthorCustomer Key Programming ized operation.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 To Arm The System Follow these steps to arm the Vehicle Security Alarm: exterior zone (refer to ⬙Keyless Enter-N-Go™⬙ in ⬙Things To Know Before Starting Your Vehicle⬙ for further information). 1. Remove the key from the ignition system (refer to • Press the LOCK button on the Remote Keyless Entry ⬙Starting Procedures⬙ in ⬙Starting And Operating⬙ for (RKE) transmitter. further information).
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with Keyless Enter-N-Go™ , described arming sequences has occurred, the Vehicle press the Keyless Enter-N-Go™ Start/Stop button Security Alarm will arm regardless of whether you are in the vehicle or not. If you remain in the vehicle and open a (requires at least one valid Key Fob in the vehicle). door, the alarm will sound. If this occurs, disarm the • For vehicles not equipped with Keyless Enter-N-Go™ , Vehicle Security Alarm.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 • The Illuminated Entry system will not operate if the dimmer control is in the “Dome defeat” position The courtesy lights will turn on when you use the (extreme bottom position). Remote Keyless Entry (RKE) transmitter to unlock the doors or open any door. REMOTE KEYLESS ENTRY (RKE) ILLUMINATED ENTRY — IF EQUIPPED This feature also turns on the approach lighting in the outside mirrors (if equipped).
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Driving at speeds 5 mph (8 km/h) and above To Unlock The Doors disables the system from responding to all RKE transmit- Press and release the UNLOCK button on the RKE ter buttons for all RKE transmitters. transmitter once to unlock the driver’s door or twice within five seconds to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Flash Lights With Lock To Lock The Doors This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmitter. This feature can be turned on or turned off. To change the current setting, refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information. Press and release the LOCK button on the RKE transmitter to lock all doors.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlatch The Trunk NOTE: Press the TRUNK button on the RKE transmitter two • The interior lights will turn off if you cycle the ignition times within five seconds to unlatch the trunk. switch to the ACC or ON/RUN position while the Panic Alarm is activated. However, the exterior lights If the vehicle is equipped with Passive Entry, refer to and horn will remain on.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate • Do not touch the battery terminals that are on the back housing or the printed circuit board. 1. Remove the emergency key by sliding the mechanical latch on the back of the RKE transmitter sideways with your thumb and then pull the key out with your other hand. 2.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE on the battery to the + sign on the inside of the battery clip, located on the back cover. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 NOTE: • Battery at an acceptable charge level • The vehicle must be equipped with an automatic • transmission to be equipped with Remote Start. • • Obstructions between the vehicle and the Key Fob may • reduce this range.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) — If Equipped The following messages will display in the EVIC if the vehicle fails to remote start or exits remote start prematurely: • Remote Start Aborted — Door Ajar • Remote Start Aborted — Hood Ajar • Remote Start Aborted — Trunk Ajar • Remote Start Aborted — Fuel Low • Remote Start Disabled — Start Vehicle To Reset To Enter Remote Start Mode Press and release the REMOTE START but
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • The engine can be started two consecutive times (two 15-minute cycles) with the RKE transmitter. However, the ignition must be cycled to the RUN position before you can repeat the start sequence for a third cycle.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS Manual Door Locks To lock each door, push the door lock knob on each door trim panel downward. To unlock the front doors, pull the inside door handle to the first detent. To unlock the rear doors, pull the door lock knob on the door trim panel upward. If the door lock knob is down when you shut the door, the door will lock. Therefore, make sure the Key Fob is not inside the vehicle before closing the door.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 WARNING! (Continued) • Do not leave the Key Fob in or near the vehicle, or in a location accessible to children, and do not leave Keyless Enter-N-Go™ in the ACC or ON/ RUN mode. A child could operate power windows, other controls, or move the vehicle. 2 Power Door Locks A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you press the power door lock switch while the ignition is in the ACC or ON/RUN position, and any front door is open, the power locks will not operate. This prevents you from accidentally locking the Key Fob in the vehicle. Cycling the ignition to the OFF position or closing the door will allow the locks to operate. If a door is open, and the ignition is in the ACC or ON/RUN position, a chime will sound as a reminder to remove the Key Fob.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Child-Protection Door Lock System — Rear Doors To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with Child-Protection Door Lock system. 2 To Engage Or Disengage The Child-Protection Door Lock System 1. Open the rear door. 2. Insert the tip of the emergency key into the lock and rotate to the LOCK or UNLOCK position. 3. Repeat steps 1 and 2 for the opposite rear door.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: For emergency exit from the rear seats when the • If wearing gloves on your hands, or if it has been raining on the Passive Entry door handle, the unlock Child-Protection Door Lock System is engaged, manually sensitivity can be affected, resulting in a slower reraise the door lock knob to the unlocked position, roll sponse time. down the window, and open the door using the outside door handle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 To Unlock From The Passenger Side With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the passenger door handle, grab the front passenger door handle to unlock all four doors automatically. The interior door panel lock knob will raise when the door is unlocked.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If one of the vehicle doors is open and the door panel switch is used to lock the vehicle, once all open doors have been closed the vehicle checks the inside and outside of the vehicle for any valid Passive Entry RKE transmitters.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 NOTE: If you inadvertently leave your vehicle’s Passive Entry RKE transmitter in the trunk and try to close the With a valid Passive Entry RKE transmitter within 3 ft deck lid, the deck lid will automatically unlatch, unless (1.0 m) of the deck lid, press the button on the right side another one of the vehicle’s Passive Entry RKE transmitof CHMSL, (Center High Mounted Stop Light) which is ters is outside the vehicle and within 3 ft (1.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Do NOT grab the door handle, when pressing the door handle lock button. This could unlock the door(s).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 NOTE: • After pressing the door handle LOCK button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking. 2 • The Passive Entry system will not operate if the RKE transmitter battery is dead.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: For vehicles equipped with the Uconnect®, the power window switches will remain active for up to 10 minutes after the ignition is cycled to the OFF position. Opening either front door will cancel this feature. The time is programmable. Refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information. WARNING! Never leave children unattended in a vehicle, and do not let children play with power windows.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 To close the window part way, lift the window switch to Reset Auto-Up the first detent and release it when you want the window Should the Auto Up feature stop working, the window to stop. probably needs to be reset. To reset Auto Up: NOTE: 1. Pull the window switch up to close the window completely and continue to hold the switch up for an • If the window runs into any obstacle during autoadditional two seconds after the window is closed.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To disable the window controls and the rear sunscreen, press and release the window lockout button (setting it in the DOWN position). To enable the window controls and the rear sunscreen, press and release the window lockout button again (setting it in the UP position). Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Trunk Release Button The trunk lid can be released from outside the vehicle by pressing the TRUNK button on the Remote Keyless Entry (RKE) transmitter twice within five seconds or by using the external release switch located on the underside of the decklid overhang. The release feature will function only when the vehicle is in the unlock condition.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Trunk Emergency Release OCCUPANT RESTRAINTS As a security measure, a Trunk Internal Emergency Release Some of the most important safety features in your lever is built into the trunk latching mechanism.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 • Front seat belts incorporate pretensioners that may Here are some simple steps you can take to minimize the enhance occupant protection by managing occupant risk of harm from a deploying air bag: energy during an impact event 1. Children 12 years old and under should always ride buckled up in a rear seat. Please pay close attention to the information in this section.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If a child from 1 to 12 years old (not in a rear facing child 5. If the air bag system in this vehicle needs to be seat) must ride in the front passenger seat, move the seat modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided as far back as possible and use the proper child restraint. under ⴖIf You Need Assistanceⴖ.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WARNING! (Continued) • Supplemental Side Air Bag Inflatable Curtain (SABIC) and Seat-Mounted Side Air Bags (SAB) also need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat. • In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belts WARNING! (Continued) All seating positions in your vehicle are equipped with lap/shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or impacts. This feature allows the shoulder part of the belt to move freely with you under normal conditions. However, in an collision, the belt will lock and reduce your risk of striking the inside of the vehicle or being thrown out.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch 1. Enter the vehicle and close the door. Sit back and plate up the webbing as far as necessary to make the belt adjust the seat. go around your lap. Lap/Shoulder Belt Operating Instructions 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly. In a sudden stop, you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt may not protect you properly. In a collision, it could even cut into you. Be sure the belt is straight.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! Adjustable Upper Shoulder Belt Anchorage In the driver and front passenger seats, the shoulder belt can be adjusted upward or downward to position the belt away from your neck.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 As a guide, if you are shorter than average you will prefer a lower position, and if you are taller than average you will prefer a higher position. When you release the anchorage try to move it up and down to make sure that it is locked in position. Seat Belts In Passenger Seating Positions The seat belts in the passenger seating positions are equipped with Automatic Locking Retractors (ALR) which are used to secure a child restraint system.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the passenger seating position is equipped with an child safety seat is installed in a seating position that has a belt with this feature. Children 12 years old and under ALR and is being used for normal usage: should always be properly restrained in the rear seat. Only pull the belt webbing out far enough to comfortably wrap around the occupant’s mid-section so as to not How To Engage The Automatic Locking Mode activate the ALR.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 WARNING! • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. • Failure to replace the belt and retractor assembly could increase the risk of injury in collisions.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System (BeltAlert®) BeltAlert® is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert®) to fasten their seat belts. The feature is active whenever the ignition is on. If the driver or front seat passenger is unbelted, the Seat Belt Reminder Light will turn on and remain on until both front seat belts are fastened.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 Seat Belts And Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe. WARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug and in the recommended seating positions. Remove and store the extender when not needed.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In addition, the vehicle is equipped with a Supplemental NOTE: The Driver and Front Passenger Advanced Front Driver Side Knee Air Bag mounted in the instrument Air Bags are certified to the new Federal regulations for panel below the steering column. Advanced Air Bags. The Advanced Front Air Bags have a multistage inflator design.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 This vehicle is equipped with Supplemental Side Air Bag Inflatable Curtains (SABIC) to protect the driver, front, and rear passengers sitting next to a window. The SABIC air bags are located above the side windows and their covers are also labeled: SRS AIRBAG. This vehicle is equipped with Supplemental SeatMounted Side Air Bags (SAB) to provide enhanced protection for an occupant during a side impact.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Supplemental Side Air Bag Inflatable Curtains (SABIC) • Front and Side Impact Sensors • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, and Seat Track Position Sensors Advanced Front Air Bag Features The Advanced Front Air Bag system has multistage driver and front passenger air bags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 When the air bag deploys, it opens the seam between the Supplemental Seat-Mounted Side Air Bags (SAB) may front and side of the seat’s trim cover. Each air bag provide enhanced protection to help protect an occupant deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air during a side impact. The SAB is marked with an air bag bag only. label sewn into the outboard side of the front seats.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The system includes side impact sensors that are calibrated to deploy the side air bags during impacts that require air bag occupant protection. WARNING! Supplemental Side Air Bag Inflatable Curtains (SABIC) Label Location NOTE: • Air Bag covers may not be obvious in the interior trim, but they will open during air bag deployment. • Being too close to the side air bags during deployment could cause you to be severely injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 SAB and SABIC air bags are a supplement to the seat belt restraint system. Occupants, including children who are up against or very close to SAB or SABIC air bags can be seriously injured or killed. Occupants, especially children, should not lean on or sleep against the door, side windows, or area where the SAB or SABIC air bags inflate, even if they are in an infant or child restraint.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Deployment Sensors And Controls Occupant Restraint Controller (ORC) The ORC is part of a Federally regulated safety system required for this vehicle. The Advanced Front Air Bags and Supplemental Driver Side Knee Air Bag will not deploy in all frontal collisions, including some that may produce substantial vehicle damage — for example, some pole collisions, truck underrides, and angle offset collisions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Seat belts are necessary for your protection in all colli- turns on the Air Bag Warning Light, either momentarily sions, and also are needed to help keep you in position, or continuously. A single chime will sound if the light comes on again after initial startup. away from an inflating air bag. The ORC monitors the readiness of the electronic parts of the air bag system whenever the ignition is in the START or ON/RUN position.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Driver And Passenger Advanced Front Air Bag Inflator Units The Driver and Passenger Advanced Front Air Bag Inflator Units are located in the center of the steering wheel and on the right side of the instrument panel. When the ORC detects a collision requiring the Advanced Front Air Bags, it signals the inflator units. A large quantity of non-toxic gas is generated to inflate the Advanced Front Air Bags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Supplemental Seat-Mounted Side Air Bag (SAB) Inflator Units Supplemental Side Air Bag Inflatable Curtain (SABIC) Inflator Units The Supplemental Seat-Mounted Side Air Bags (SAB) are During collisions where the impact is confined to a designed to activate only in certain side collisions.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Because air bag sensors estimate deceleration over time, • Turn on the interior lights, which remain on as long as the battery has power, until the ignition key is revehicle speed and damage are not good indicators of moved or the ignition switch is changed to OFF using whether or not an air bag should have deployed. the Keyless Go Start/Stop button. Front And Side Impact Sensors • Unlock the doors automatically.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 If you do have a collision which deploys the air bags, any or all of the following may occur: irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation continues, see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s instructions for cleaning.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Air Bag System WARNING! (Continued) WARNING! • Modifications to any part of the air bag system could cause it to fail when you need it. You could be injured if the air bag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right side of the instrument panel.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Air Bag Warning Light NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to “Fuses” in “Maintaining Your Vehicle” for the proper air bag fuses. See your authorized dealer if the fuse is good.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE time, typically 30 seconds or less. The EDR in this vehicle are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of is designed to record such data as: personally identifying data routinely acquired during a • How various systems in your vehicle were operating; crash investigation.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Children 12 years or younger should ride properly buckled up in a rear seat, if available. According to crash statistics, children are safer when properly restrained in the rear seats rather than in the front. NOTE: For additional information, refer to www.seatcheck.org or call 1–866–SEATCHECK. Canadian residents should refer to Transport Canada’s website for additional information: http:// www.tc.gc.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Summary Of Recommendations For Restraining Children In Vehicles Infants and Toddlers Small Children Larger Children Children Too Large for Child Restraints Child Size, Height, Weight or Age Children who are two years old or younger and who have not reached the height or weight limits of their child restraint Children who are at least two years old or who have out-grown the height or weight limit of their rear-facing child restraint Children who have out-g
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 infant carrier but are still less than at least two years old. Children should remain rearward-facing until they reach Safety experts recommend that children ride rearwardthe highest weight or height allowed by their convertible facing in the vehicle until they are two years old or until child seat. they reach either the height or weight limit of their rear facing child safety seat.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Older Children And Child Restraints Children who are two years old or who have outgrown their rear-facing convertible child seat can ride forwardfacing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing direction are for children who are over two years old or who have outgrown the rear-facing weight or height limit of their rear-facing convertible child seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 4. Is the lap part of the belt as low as possible, touching the child’s thighs and not their stomach? Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend 5. Can the child stay seated like this for the whole trip? over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Weight of the Child + Child Restraint Rear-Facing Child Restraint Rear-Facing Child Restraint Forward-Facing Child Restraint Forward-Facing Child Restraint Up to 65 lbs (29.5 kg) More than 65 lbs (29.5 kg) Up to 65 lbs (29.5 kg) More than 65 lbs (29.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Lower Anchors and Tethers for Children (LATCH) Restraint System Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCHequipped child seats. There are two lower anchorages located at the back of the seat cushion where it meets the seatback and one top tether anchorage located behind the seating position.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle Lower Anchorage Symbol 2 anchorages per seating position Top Tether Anchorage Symbol
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 What is the weight limit (child’s weight + weight of the child restraint) for using the LATCH anchorage system to attach the child restraint? 65 lbs (29.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Can the rear-facing child restraint touch the back of the front passenger seat? Yes Can the head restraints be removed? Yes, center position only. The child seat may touch the back of the front passenger seat if the child restraint manufacturer also allows contact. See your child restraint owner’s manual for more information.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Locating The LATCH Anchorages In addition, there are tether strap anchorages behind each rear seating position located in the panel between the rear seatback and the rear window. These tether strap anchorages are under a plastic cover with the tether anchorage symbol on it. Tether Strap Anchorages LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side.
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Always follow the directions of the child restraint manufacturer when installing your child restraint. Not all child If a child restraint installed in the center position blocks restraint systems will be installed as described here. the seat belt webbing or buckle for the outboard position, do not use that outboard position. If a child seat in the To Install A LATCH-compatible Child Restraint center position blocks the outboard LATCH anchors or 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 3. Place the child seat between the lower anchorages for 7. Test that the child restraint is installed tightly by that seating position. For some second row seats, you pulling back and forth on the child seat at the belt path. It should not move more than 1 inch (25.4 mm) may need to recline the seat and / or raise the head in any direction. restraint to get a better fit. 4.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE behind the child restraint, route the seat belt through the child restraint belt path and then buckle it. Do not lock the seatbelt. Remind all children in the vehicle that the seat belts are not toys and that they should not play with them. WARNING! Improper installation of a child restraint to the LATCH anchorages can lead to failure of the restraint. The child could be badly injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 into the retractor. For additional information on ALR, Lap/Shoulder Belt Systems for Installing Child refer to the “Automatic Locking Mode” description un- Restraints in this Vehicle der “Occupant Restraints.” The cinching latch plate is designed to hold the lap portion of the seatbelt tight when webbing is pulled tight and straight through a child restraint’s belt path.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s weight + weight of the child restraint) for using the Tether Anchor with the seat belt to attach a forward facing child restraint? Can the rear-facing child restraint touch the back of the front passenger seat? Weight limit of the Child Restraint Can the head restraints be removed? Yes, center position only.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 5. To lock the seat belt, pull down on the shoulder part of the belt until you have pulled all the seat belt webbing out of the retractor. Then, allow the webbing to retract Place the child seat in the center of the seating back into the retractor. As the webbing retracts, you position. For some second row seats, you may need to will hear a clicking sound.
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 8. If the child restraint has a top tether strap and the Installing A Child Restraint With A Cinching seating position has a top tether anchorage, connect Latch Plate (CINCH) — If Equipped the tether strap to the anchorage and tighten the tether 1. Place the child seat in the center of the seating strap. Refer to “Lower Anchors and Tethers for Chilposition.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 If the buckle or the cinching latch plate is too close to the belt path opening of the child restraint, you may have trouble tightening the seat belt. If this happens, disconnect the latch plate from the buckle and twist the short buckle-end belt up to three full turns to shorten it. Insert the latch plate into the buckle with the release button facing out, away from the child restraint. Repeat steps 4 6.
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing Child Restraints Using The Top Tether Anchorage 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for that seating position (see the charts above), move the child restraint to another position in the vehicle if one is available.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 2 Adjustable Headrest Downward Position Tether Strap Mounting 1 — Cover 3 — Attaching Strap A — Tether Strap Hook B — Tether Anchor 4. Attach the tether strap hook of the child restraint to the top tether anchorage as shown in the diagram. 5. Remove slack in the tether strap according to the child restraint manufacturer’s instructions.
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in. Air Bags deploying in the front seat could harm your pet. However, wide-open throttle acceleration in low gear can An unrestrained pet will be thrown about and possibly be detrimental and should be avoided. injured, or injure a passenger during panic braking or in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as an indication of difficulty. SAFETY TIPS WARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using a seat belt properly.
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • If you are required to drive with the trunk/liftgate open, make sure that all windows are closed and the climate control BLOWER switch is set at high speed. DO NOT use the recirculation mode. • If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 Air Bag Warning Light The light should come on and remain on for four to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not lit during starting, see your authorized dealer. If the light stays on, flickers, or comes on while driving, have the system checked by an authorized dealer. Defroster Check operation by selecting the defrost mode and place the blower control on high speed.
98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Check mounting of mats on a regular basis. Always properly reinstall and secure floor mats that have been removed for cleaning. • Always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. • If required, mounting posts must be properly installed, if not equipped from the factory.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 MIRRORS . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 ▫ Power Mirrors . . . . . . . . . . . . . . . . . . . . . . .111 ▫ Automatic Dimming Mirror . . . . . . . . . . . . . .108 ▫ Power Folding Outside Mirrors — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .111 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . .109 ▫ Outside Mirrors Folding Feature — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . .
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Uconnect® Phone (8.4/8.4N) . . . . . . . . . . . . . . .122 䡵 SEATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179 ▫ Uconnect® 8.4A/8.4N . . . . . . . . . . . . . . . . . .122 ▫ Power Seats — If Equipped . . . . . . . . . . . . . .179 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .126 ▫ Power Lumbar — If Equipped . . . . . . . . . . . .182 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 䡵 TO OPEN AND CLOSE THE HOOD . . . . . . . . .196 ▫ Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . .204 䡵 LIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198 ▫ Lane Change Assist . . . . . . . . . . . . . . . . . . .204 ▫ Headlight Switch . . . . . . . . . . . . . . . . . . . . .198 ▫ High/Low Beam Switch . . . . . . . . . . . . . . . .204 ▫ Automatic Headlights — If Equipped . . . . . . .199 ▫ Flash-To-Pass . . . . . . . .
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Headlights On With Wipers (Available with Automatic Headlights Only) . . . . . . . . . . . . .212 ▫ Rain Sensing Wipers . . . . . . . . . . . . . . . . . . .212 䡵 TILT/TELESCOPING STEERING COLUMN . . .214 䡵 POWER TILT/TELESCOPING STEERING COLUMN — IF EQUIPPED . . . . . . . . . . . . . . .215 䡵 HEATED STEERING WHEEL — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . .216 䡵 ADJUSTABLE PEDALS — IF EQUIPPED . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 ▫ Setting The Following Distance In ACC . . . . . .232 ▫ Service The ParkSense® Park Assist System . . .254 ▫ Adaptive Cruise Control (ACC) Menu . . . . . . .236 ▫ Cleaning The ParkSense® System . . . . . . . . . .254 ▫ Display Warnings And Maintenance . . . . . . . .237 ▫ ParkSense® System Usage Precautions. . . . . . .254 ▫ Precautions While Driving With ACC . . . . . . .239 䡵 PARKVIEW® REAR BACK UP CAMERA — IF EQUIPPED . . . . . . . . . . . . . . . .
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Programming A Rolling Code . . . . . . . . . . . . .264 ▫ Venting Sunroof — Express . . . . . . . . . . . . . .273 ▫ Programming A Non-Rolling Code . . . . . . . . .266 ▫ Sunshade Operation. . . . . . . . . . . . . . . . . . . .273 ▫ Canadian/Gate Operator Programming . . . . . .267 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . .273 ▫ Using HomeLink®. . . . . . . . . . . . . . . . . . . . .269 ▫ Sunroof Maintenance . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 ▫ Closing Power Shade — Express . . . . . . . . . . .277 ▫ Console Features . . . . . . . . . . . . . . . . . . . . .287 ▫ Closing Power Shade — Manual Mode . . . . . .277 ▫ Door Storage . . . . . . . . . . . . . . . . . . . . . . . . .289 ▫ Pinch Protect Feature . . . . . . . . . . . . . . . . . . .278 ▫ Rear Seat Armrest Storage — If Equipped . . . .290 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . .
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Automatic Dimming Mirror This mirror automatically adjusts for headlight glare from vehicles behind you. This feature will be defaulted on, and only be disabled when the vehicle is moving in reverse. NOTE: This feature is disabled when the vehicle is moving in reverse. Automatic Dimming Mirror CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Outside Mirrors Outside Mirrors Folding Feature — If Equipped To receive maximum benefit, adjust the outside mirror(s) Some models have outside mirrors that are hinged. The to center on the adjacent lane of traffic and a slight hinge allows the mirror to pivot forward and rearward to overlap of the view obtained from the inside mirror. resist damage. The hinge has three detent positions: full forward, full rearward and normal.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Three of the LEDs are turn signal indicators, which flash with the corresponding turn signal lights in the front and rear of the vehicle. Turning on the Hazard Warning flashers will also activate these LEDs. The fourth LED supplies illuminated entry lighting, which turns on in both mirrors when you use the Remote Keyless Entry (RKE) transmitter or open any door. This LED shines outward to illuminate the front and rear door handles.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 The power mirror controls consist of mirror select butThe power mirror controls are located on the driver’s tons and a four-way mirror control switch. To adjust a mirror, press either the L (left) or R (right) button to select door trim panel. the mirror that you want to adjust. Power Mirrors NOTE: A light in the select button will illuminate indicating the mirror is activated and can be adjusted.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once and the mirrors will fold in, Illuminated Vanity Mirrors — If Equipped pressing the switch a second time will return the mirrors An illuminated vanity mirror is located on the sun visor. to the normal driving position. To use the mirror, rotate the sun visor downward and NOTE: If the vehicle speed is greater than 10 mph swing the mirror cover upward. The light turns on automatically. Closing the mirror cover turns off the light.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 “Slide-On-Rod” And Extender Features Of Sun Visor To use the “Slide-On-Rod” feature of the sun visor, rotate the sun visor downward and swing the sun visor so it is parallel to the side window, grabbing the sun visor with your left hand pull rearwards until the sun visor is in the desired position. To use the extender feature of the sun visor, grab the extender which is located at the rear of the visor and pull rearward.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE BLIND SPOT MONITORING — IF EQUIPPED The Blind Spot Monitoring (BSM) system uses two radarbased sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that enter the blind spot zones from the rear/front/side of the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 The BSM detection zone covers approximately one lane on both sides of the vehicle (11 ft or 3.35 m). The zone starts at the outside rear view mirror and extends approximately 20 ft (6 m) to the rear of the vehicle. The BSM system monitors the detection zones on both sides of the vehicle when the vehicle speed reaches approximately 6 mph (10 km/h) or higher and will alert the driver of vehicles in these areas.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The BSM system notifies the driver of objects in the detection zones by illuminating the BSM warning light located in the outside mirrors in addition to sounding an audible (chime) alert and reducing the radio volume. Refer to “Modes Of Operation” for further information. The BSM system monitors the detection zone from three different entry points (side, rear, front) while driving to see if an alert is necessary.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Entering From The Rear Overtaking Traffic Vehicles that come up from behind your vehicle on either If you pass another vehicle slowly (with a relative speed side and enter the rear detection zone with a relative of less than 10 mph (16 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning speed of less than 30 mph (48 km/h). light will be illuminated.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The BSM system is designed not to issue an alert on The BSM system will not alert you of objects that are stationary objects such as guardrails, posts, walls, foliage, traveling in the opposite direction of the vehicle in berms, etc. However, occasionally the system may alert adjacent lanes. on such objects. This is normal operation and your vehicle does not require service.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 WARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones. The BSM system is not designed to detect pedestrians, bicyclists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicle’s mirrors, glance over your shoulder, and use your turn signal before changing lanes. Failure to do so can result in serious injury or death.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE rear end of the vehicle is exposed. The RCP system will RCP monitors the rear detection zones on both sides of then have a clear view of the cross traffic and if an the vehicle, for objects that are moving toward the side of oncoming vehicle is detected, alert the driver. the vehicle with a minimum speed of approximately 1 to 2 mph (1 km/h to 3 km/h), to objects moving a maximum of approximately 10 mph (16 km/h), such as in parking lot situations.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 WARNING! RCP is not a Back Up Aid system. It is intended to be used to help a driver detect an oncoming vehicle in a parking lot situation. Drivers must be careful when backing up, even when using RCP. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. Failure to do so can result in serious injury or death.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Astronomy Zone — System Temporarily Unavailable • Whenever an audible alert is requested by the BSM When the vehicle enters this zone the blind spot system will become temporarily unavailable and the EVIC will system, the radio volume is reduced. display the message “ Blind spot system unavailable• If the hazard flashers are on, the system will request Astronomy zone”. The side mirrors LED’s will be lit up the appropriate visual alert only.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Uconnect® Phone supports the following features: Screen Activated Features Voice Activated Features: • Dialing via Keypad using touch-screen. • Hands Free dialing via Voice (“Call John Smith Mo- • Viewing and Calling contacts from Phonebooks disbile” or, “Dial 248 555-1212”). played on the touch-screen. • Hands Free text to speech listening of your incoming • Setting Favorite Contact Phone numbers so they are SMS messages.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Your phone must be capable of SMS messaging via Bluetooth® for messaging features to work properly. Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect® Phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 The Uconnect® Phone allows up to ten mobile phones or Uconnect® Voice Command Button audio devices to be linked to the system. Only one linked (or The Uconnect® Voice Command Button is paired) mobile phone and one audio device can be used with only used for “barge in” and when you are the system at a time. The system is available in English, already in a call and you want to send Tones or Spanish, or French languages. make another call.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For certain operations, compound commands can be used. For example, instead of saying “Call” and then Voice commands can be used to operate the Uconnect® “John Smith” and then “mobile”, the following comPhone and to navigate through the Uconnect® Phone pound command can be said: “Call John Smith mobile”. menu structure. Voice commands are required after most Uconnect® Phone prompts.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 The system utilizes continuous dialog; when the system requires more information from the user it will ask a Your Uconnect® Phone Voice system uses a Natural question to which the user can respond without pressing Language Voice Recognition (VR) engine. button. the Voice Command Natural speech allows the user to speak commands in Voice Command Tree phrases or complete sentences.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cancel Command 1. Press the “Phone” soft-key on the screen to begin. At any prompt, after the beep, you can say “Cancel” and 2. If there is no phone currently connected with the you will be returned to the main menu. system, a pop-up will appear. or buttons when the You can also press the system is listening for a command and be returned to the main or previous menu.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 3. Select Yes to begin the pairing process. Then, search for available devices on your Bluetooth® enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect® screen. • If No is selected, touch the “Settings” soft-key from the Uconnect® Phone main screen, • Touch the “Add Device” soft-key, • Search for available devices on your Bluetooth® enabled mobile phone.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pair Additional Mobile Phones • Touch the “Settings” soft-key from the Phone main screen, • Next, touch the “Phone/Bluetooth®” soft-key, • Touch the “Add Device” soft-key, • Search for available devices on your Bluetooth® enabled mobile phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 You can also use the following VR commands to bring up • Uconnect® Phone will display an in process screen while the system is connecting, the Paired Phone screen from any screen on the radio: • “Show Paired Phones” or • “Connect My Phone” Pair A Bluetooth® Streaming Audio Device • Touch the “Media” soft-key to begin, • When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite device.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Connecting To A Particular Mobile Phone Or Audio Device After Pairing • Touch the + soft-key located to the right of the device name, Uconnect® Phone will automatically connect to the high- • The options pop-up will be displayed, est priority paired phone and/or Audio Device within • Touch the “Disconnect Device” soft-key, range. If you need to choose a particular phone or Audio Device follow these steps: • Touch the X to exit out of the Settings screen.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Making A Phone Or Audio Device A Favorite • Touch the “Settings” soft-key, Access Profile may support this feature. See Uconnect® website, www.UconnectPhone.com, for supported phones. • To call a name from a downloaded mobile phone book, follow the procedure in the Voice Recognition Quick Reference section.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Only the phonebook of the currently connected mobile phone is accessible. • This downloaded phonebook cannot be edited or deleted on the Uconnect® Phone. These can only be edited on the mobile phone. The changes are transferred and updated to Uconnect® Phone on the next phone connection. appropriate number. Touch the + next to the selected number to display the options pop-up. In the pop-up select “Add to Favorites”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 3. From the Phone main screen, select phonebook. From the phonebook screen, select the “Favorites” soft-key and then select the + soft-key located to the right of the phonebook record. Select an empty entry and touch the + on that selected entry. When the Options pop-up appears, touch “Add from Mobile”. You will then be asked which contact and number to choose from your mobile phonebook. When complete the new favorite will be shown.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Options pop-up will display, touch “Remove from Favs”. Emergency And Towing Assistance The Emergency and Towing Favorite numbers can only be altered. These cannot be deleted and the names cannot be changed. To change the Emergency or Towing number follow these steps. • Touch the “Phonebook” soft-key from the Phone main screen. • Touch the “Favorites” soft-key. Scroll to the bottom of the list to locate the Emergency and Towing Favorites.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Phone Call Features • Mobile Phonebook The following features can be accessed through the Uconnect® Phone if the feature(s) are available and supported by Bluetooth® on your mobile service plan. For example, if your mobile service plan provides threeway calling, this feature can be accessed through the Uconnect® Phone. Check with your mobile service provider for the features that you have.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Call Controls Touch-Tone Number Entry The touch-screen allows you to control the following call • features: • • Answer • • End • • Ignore • Hold/unhold • Mute/unmute • Transfer the call to/from the phone • Swap two active calls • Join two active calls together Touch the “Phone” soft-key, Touch the “Dial” soft-key, The Touch-Tone screen will be displayed, Use the numbered soft-keys to enter the number and touch “Call”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Recent Calls • Missed Calls You may browse up to 34 of the most recent of each of the • All Calls following call types: These can be accessed by touching the “recent calls” soft-key on the Phone main screen. button and say “Show my You can also press the incoming calls” from any screen and the Incoming calls will be displayed. button and say “Show my You can also press the recent calls” from any screen and the All calls screen will be displayed.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Uconnect® Phone compatible phones in the market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can When you receive a call on your mobile phone, the only answer an incoming call or ignore it. Uconnect® Phone will interrupt the vehicle audio system, if on, and will ask if you would like to answer the Making A Second Call While Current Call Is In button to accept the call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Place/Retrieve A Call From Hold Call Termination During an active call, touch the “Hold” soft-key on the To end a call in progress, momentarily press the butPhone main screen. ton or the end soft-key. Only the active call(s) will be terminated and if there is a call on hold, it will become Toggling Between Calls the new active call.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the phone is not reachable and the Uconnect® Phone is operational, you may reach the emergency number as Call continuation is the progression of a phone call on the follows: Uconnect® Phone after the vehicle ignition key has been switched to OFF. • Press the button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 • The Uconnect® Phone does slightly lower your NOTE: chances of successfully making a phone call as to that • The roadside assistance call may also be initiated by for the mobile phone directly. touch. WARNING! Your phone must be turned on and connected to the Uconnect® Phone to allow use of this vehicle feature in emergency situations, when the mobile phone has network coverage and stays connected to the Uconnect® Phone.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE numbers, is also to be used for navigating through an automated customer service center menu structure, and This method is used in instances where one generally has to leave a number on a pager. to press numbers on the mobile phone keypad while navigating through an automated telephone system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 • Some paging and voice mail systems have system time Voice Response Length out settings that are too short and may not allow the It is possible for you to choose between Brief and use of this feature. Detailed Voice Response Length. • Pauses, wait or other characters that are supported by • Touch the “More” soft-key (where available), then some phones are not supported over Bluetooth®.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dialing Using The Mobile Phone Keypad WARNING! Your new vehicle has many features for the comfort and convenience of you and your passengers. Only use such features when it is safe to do so. Failure to follow this Warning may result in an accident involving serious injury or death.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Advanced Phone Connectivity Transfer Call To And From Mobile Phone Things You Should Know About Your Uconnect® Phone The Uconnect® Phone allows ongoing calls to be trans- Voice Command ferred from your mobile phone to the Uconnect® Phone • For best performance, adjust the rearview mirror to without terminating the call.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • You can say “O” (letter “O”) for “0” (zero). • Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 • Performance, such as audio clarity, echo, and loudness NOTE: Uconnect® Phone SMS is only available when the to a large degree rely on the phone and network, and vehicle is not in moving. not the Uconnect® Phone. • Echo at the far end can sometimes be reduced by lowering the in-vehicle audio volume. • In a convertible vehicle, system performance may be compromised with the convertible top down.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Read Messages: Once a message is received and viewed or listened to, you will have the following options: If you receive a new text message while your phone is connected to Uconnect® Phone, an announcement will • Send a Reply be made to notify you that you have a new text message. • Forward • Call Send Messages Using Soft-Keys: You can send messages using Uconnect® Phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Send Messages Using Voice Commands: • Press the button, • After the “Listening” prompt and the following beep, say “Send message to John Smith mobile”, • After the system prompts you for what message you want to send, say the message you wish to send or say “List”. There are 18 preset messages. • If multiple numbers are available for the contact select which number you would like to have the message sent, • Press “Send” or “Cancel”.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After the system confirms that you want to send your List of Preset Messages: message to John Smith, your message will be sent. 1. Yes. 2. No. 3. Okay. 4. I can’t talk right now. 5. Call me. 6. I’ll call you later. 7. I’m on my way. 8. Thanks. 9. I’ll be late. 10. I will be minutes late.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 11. See you in minutes. Bluetooth® Communication Link 12. Stuck in traffic. Mobile phones have been found to lose connection to the Uconnect® Phone. When this happens, the connection can generally be reestablished by switching the mobile phone OFF/ON. Your mobile phone is recommended to remain in Bluetooth® ON mode. 13. Start without me. 14. Where are you? 15. Are you there yet? 16. I need directions. 17. I’m lost. 18. See you later.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 3
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Voice Commands Primary Alternate (s) zero one two three four five six seven eight nine star (*) plus (+) Voice Commands Primary Alternate (s) pound (#) add location all call cancel confirmation prompts continue delete dial download edit emergency 3
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Primary Alternate (s) English erase all Espanol Francais help home language list names list phones mobile mute Voice Commands Primary Alternate (s) mute off new entry no other pair a phone phone pairing pairing phonebook phone book previous record again
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Voice Commands Primary Alternate (s) redial return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance Voice Commands Primary Alternate (s) transfer call Uconnect® Tutorial voice training work yes 3
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Tree
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 6. Send dial tones for automated systems is available while a call is active. This is an example that uses a 1. You can replace “John Smith” with any name in your Phonebook Record named “Voicemail Password.” mobile or favorite phone book. You can also say “Send a message to John Smith” and the system will ask you 7.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 4. Messaging commands only work if the Uconnect® system is equipped with this feature and the mobile 1. You can replace “John Smith” with any name in your phone supports messaging over Bluetooth®. mobile or favorite phone book. You can also say “Send a message to John Smith” and the system will ask you 5. You can replace “248 555 1212” with any phone which phone number you want to send a message to number supported by your Mobile phone. for John Smith. 6.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 NOTE: Available Voice Commands are shown in bold VOICE COMMAND face and underlined in the gray shaded boxes. Uconnect® 8.4/8.4 Nav General Information The Uconnect® Voice Command system allows This device complies with Part 15 of the FCC rules and you to control your AM, FM radio, satellite RSS 210 of Industry Canada. Operation is subject to the radio, disc player, SD Card, USB/iPod and Sirifollowing conditions: usXM Travel Link.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws. Your attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death. If no command is spoken the system will say one of two responses: • I didn’t understand • I didn’t get that, etc.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Pressing the Uconnect® Voice Command button while the system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can say a command. This will become helpful once you start to learn the options. The system will best recognize your speech if the windows are closed, and the heater/air conditioning fan is set to low. At any point, if the system does not recognize one of your commands, you will be prompted to repeat it.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The system utilizes continuous dialog; when the system requires more information from the user it will ask a Natural speech allows the user to speak commands in question to which the user can respond without pressing phrases or complete sentences. The system filters out button. the Uconnect® Voice Command certain non-word utterances and sounds such as “ah” and “eh”. The system handles fill-in words such as “I Uconnect® Voice Commands would like to”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Changing the Volume Starting Voice Recognition (VR) Session in Radio/Player Modes 1. Start a dialogue by pressing the Voice Command In this mode, you can say the following commands: button. NOTE: The commands can be said on any screen when a call is not active after pushing the Uconnect® Voice 3. Use the ON/OFF VOLUME rotary knob to adjust the button. Command volume to a comfortable level while the Voice Command system is speaking.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Tree
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 NOTE: 1. You can replace “950 AM” with any other AM or FM frequency, such as “98.7 FM”. 2. You can replace “80’s on 8” with any other satellite station name received by the radio. 3. You can replace “8” with any other satellite channel number received by the radio. 4. You can replace “rock” with any of the satellite music types. NOTE: Available Voice Commands are shown in bold face and shaded grey.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 NOTE: 1. You can replace the album, artist, song, genre, playlist, podcast and audio book names with any corresponding names on the current device that is playing. 2. You can replace “8” with any track on the CD that is currently playing. Command is only available when CD is playing. 3. Playlist, Podcast and audio book commands are only available when the iPod is connected and playing. 4.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 NOTE: 1. You can replace “NFL” with any league shown on the sports league screen. For example you can say “Show MLB headlines” or “Show PGA headlines”. 2. You can replace “Headlines” with any menu items shown on a league screen. For example you can say “Show NFL Schedule and results” or “Show NCAA Basketball AP top 25” or “Show Major League Baseball Teams”. 3.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 NOTE: 1. Only available with Navigation equipped vehicles. 2. You can replace “Player” with “Radio”, “Navigation”, “Phone”, “Climate”, “More” or “Settings”. 3. Navigation commands only work if equipped with Navigation. NOTE: Available Voice Commands are shown in bold face and shaded grey.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 NOTE: 1. You can also say “Find City”, “Find Favorite”, “Find Play by Category”, “Find Play by Name”, “Find Recently Found”, “Where to?” or “Go Home”. 2. You can say “Find Nearest” then “Restaurant”, “Fuel”, “Transit”, “Lodging”, “Shopping”, “Bank”, “Entertainment”, “Recreation”, “Attractions”, “Community”, “Auto Services”, “Hospitals”, “Parking”, “Airport”, “Police Stations”, “Fire Stations”, or “Auto Dealers”.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The passenger’s seat will move up or down, Adjusting The Seat Forward Or Rearward forward or rearward. The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Reclining The Seatback WARNING! (Continued) The angle of the seatback can be adjusted forward or rearward. Push the seatback switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position is reached. WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Lumbar — If Equipped Vehicles equipped with power driver or passenger seats may be also be equipped with power lumbar. The power lumbar switch is located on the outboard side of the power seat. Push the switch forward or rearward to increase or decrease the lumbar support. Push the switch upward or downward to raise or lower the lumbar support.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 WARNING! (Continued) • Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat. 3 Front Heated Seat Operations — Uconnect® 8.4/8.4 Nav Press the “Controls” soft-key located on the bottom of the Uconnect® display.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the HI-level setting is selected, the heater will provide a boosted heat level during the first four minutes of operation. Then, the heat output will drop to the normal HI-level. If the HI-level setting is selected, the system will automatically switch to LO-level after a maximum of 60 minutes of continuous operation. At that time, the display will change from HI to LO, indicating the change.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 number of indicators illuminated changes from two to one, indicating the change. Operation on the LO-level On vehicles equipped with rear heated seats, the seats setting also turns OFF automatically after approximately closest to the doors are heated. The controls for these 30 minutes. seats are located on the rear of the center console. NOTE: Once a heat setting is selected, heat will be felt You can choose from HI, LO or OFF heat settings.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the “Driver” or “Passenger” seat soft-key once to select HI-level ventilation. Press the soft-key a second Press the “Controls” soft-key located on the bottom of the time to select LO-level ventilation. Press the soft-key a third time to shut off the seat ventilation. Uconnect® display. Front Ventilated Seat Operation — Uconnect® 8.4/8.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 Vehicles Equipped With Remote Start On models that are equipped with remote start, the driver’s ventilated seat can be programmed to come on during a remote start. Refer to “Remote Starting System — If Equipped” in “Things To Know Before Starting Your Vehicle” for further information. Head Restraints Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Active Head Restraints — Front Seats The front driver and passenger seats are equipped with Active Head Restraints (AHR). In the event of a rear impact the AHRs will automatically extend forward minimizing the gap between the back of the occupants head and the AHR. The AHRs will automatically return to their normal position following a rear impact. If the AHRs do not return to their normal position see your authorized dealer immediately.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 WARNING! Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players. These items may interfere with the operation of the Active Head Restraint in the event of a collision and could result in serious injury or death. Rear Head Restraints The center head restraint has two positions, up or down. When the center seat is being occupied the head restraint should be in the raised position.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Rear Seat After releasing the seatback, it can be folded forward. The rear seatbacks can be folded forward to provide an additional storage area. To fold the rear seatback, pull on the loops located on the upper seatback. NOTE: These loops can be tucked away when not in use. Folded Rear Seatback When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 WARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. • The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The memory seat switch is located on the driver’s door trim panel. The switch consists of three buttons: The (S) button, which is used to activate the memory save function and the (1) and (2) buttons which are used to recall either of two pre-programmed memory profiles. Programming The Memory Feature To create a new memory profile, perform the following: 1. Place the ignition into the RUN position. 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 NOTE: To program your RKE transmitters, perform the following: • Memory profiles can be set without the vehicle in 1. Remove the Key Fob from the ignition (or change the ignition to OFF, for vehicles equipped with Keyless PARK, but the vehicle must be in PARK to recall a Enter-N-Go). memory profile. • The Recall Memory with Remote Key Unlock feature 2. Select desired memory profile (1) or (2). The system will recall any stored settings for this profile.
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Your RKE transmitters can be unlinked to your memory settings by following steps 1-4 above and pressing the UNLOCK button (instead of LOCK) on the RKE transmitter in Step 4. To recall the memory setting for driver two, press MEMORY button number (2) on the driver’s door or the UNLOCK button on the RKE transmitter linked to memory position 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 Easy Entry/Exit Seat (Available With Memory Seat Only) This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. • When you remove the Key Fob from the ignition (or change the ignition to OFF, for vehicles equipped with Keyless Enter-N-Go), the driver seat will move to a position 0.3 in (7.7 mm) forward of the rear stop if the driver seat position is between 0.9 in and 2.7 in (22.7 mm and 67.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Easy Entry/Easy Exit feature can be enabled or disabled using the Uconnect® System, refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information. TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. 1. Pull the hood release lever located under the left side of the instrument panel. Hood Release Lever 2. Move to the outside of the vehicle and push the safety catch to the left.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 CAUTION! To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 6 in (15 cm), and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. WARNING! Hood Safety Latch Use the hood prop rod (if equipped) to secure the hood in the open position. Be sure the hood is fully latched before driving your vehicle.
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch controls the operation of the headlights, parking lights, instrument panel lights, instrument panel light dimming, interior lights and fog lights. Headlight Switch Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 Automatic Headlights — If Equipped Headlights On With Wipers (Available with This system automatically turns the headlights on or off Automatic Headlights Only) according to ambient light levels. To turn the system on, When this feature is active, the headlights will turn on rotate the headlight switch counterclockwise to the approximately 10 seconds after the wipers are turned on AUTO position.
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To activate the delay feature, place the ignition in the OFF position while the headlights are still on. Then, turn off the headlights within 45 seconds. The delay interval begins when the headlight switch is turned off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 If the windshield or SmartBeam mirror is replaced, the Adaptive Bi-Xenon High Intensity Discharge SmartBeam mirror must be re-aimed to ensure proper Headlights — If Equipped performance. See your local authorized dealer. This system automatically swivels the headlight beam pattern horizontally to provide increased illumination in To Activate the direction the vehicle is steering. 1. Turn the headlight switch to the AUTO headlight NOTE: position. 2.
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Daytime Running Lights (DRL) Fog Lights — If Equipped The LED Daytime Running Lights will come on when- Front Fog Lights — If Equipped ever the ignition is placed in the RUN position, the The front fog light switch is built into the headlight headlights are off, the transmission is moved out of switch. “Park” position, and the parking brake is off. The headlight switch must be used for normal nighttime driving.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 To activate the front fog lights, turn on the parking lights or the low beam headlights and press the headlight switch. To turn off the front fog lights, either press the headlight switch a second time or turn off the headlight switch. Rear Fog Lights — If Equipped NOTE: The fog lights will operate with the low beam headlights or parking lights on. However, selecting the high beam headlights will turn off the fog lights.
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals Lane Change Assist Move the multifunction lever up or down and the arrows Tap the lever up or down once, without moving beyond on each side of the instrument cluster flash to show the detent, and the turn signal (right or left) will flash proper operation of the front and rear turn signal lights. three times then automatically turn off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 Each light can be turned on by pressing a switch on either The front map/reading lights are mounted in the over- side of the console. These buttons are backlit for night time visibility. To turn the lights off, press the switch a second head console. time. The lights will also turn on when the UNLOCK button on the Remote Keyless Entry (RKE) is pressed.
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Courtesy Lights Ambient Light The courtesy lights can be turned on by pressing the top The overhead console is equipped with an ambient light corner of the lens. To turn the lights off, press the lens a feature. This light casts illumination for improved visibilsecond time. ity of the floor center console and PRNDL area.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 Interior Lights The interior lights come on when a door is opened. To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open. This includes the glove box light, but not the trunk light. To restore interior light operation, either turn the ignition switch ON or cycle the light switch.
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE With the parking lights or headlights on, rotating the left dimmer control upward will increase the brightness of the instrument panel lights and lighted cupholders (if equipped). Instrument Panel Dimmer Ambient Light Control Rotate the right dimmer control upward or downward to increase or decrease the brightness of the door handle lights and ambient light located in the overhead console.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 Dome Light Position WINDSHIELD WIPERS AND WASHERS Rotate the left dimmer control completely upward to the second detent to turn on the interior lights. The interior lights will remain on when the dimmer control is in this position. The multifunction lever operates the windshield wipers and washer when the ignition is placed in the RUN position. The multifunction lever is located on the left side of the steering column.
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle with a variable pause between cycles desirable. Rotate the end of the multifunction lever to the first detent position, and then turn the end of the lever to select the desired delay interval.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 If you activate the washer while the windshield wiper control is in the delay range, the wipers will operate for Rotate the end of the lever downward to the Mist two wipe cycles after releasing the lever and then resume position to activate a single wipe cycle to clear off road the intermittent interval previously selected. mist or spray from a passing vehicle.
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights On With Wipers (Available with Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the headlight switch is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 The Rain Sensing feature can be turned on and off using The Rain Sensing system has protective features for the the Uconnect® System, refer to “Uconnect® Settings” in wiper blades and arms. It will not operate under the “Understanding Your Instrument Panel” for further in- following conditions: formation.
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column. To unlock the steering column, pull the control handle down. To tilt the steering column, move the steering wheel upward or downward as desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 POWER TILT/TELESCOPING STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The power tilt/telescoping steering column switch is located below the multifunction lever on the steering column. To tilt the steering column, move the switch up or down as desired.
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE HEATED STEERING WHEEL — IF EQUIPPED The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on it will operate for approximately 58 to 70 minutes before automatically shutting off. The heated steering wheel can shut off early or may not turn on when the steering wheel is already warm.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 Vehicles Equipped With Remote Start On models that are equipped with remote start, the heated steering wheel can be programmed to come on during a remote start. Refer to “Remote Starting System — If Equipped” in “Things To Know Before Starting Your Vehicle” for further information. WARNING! Heated Steering Wheel Soft-Key NOTE: The engine must be running for the heated steering wheel to operate.
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. ADJUSTABLE PEDALS — IF EQUIPPED The adjustable pedals system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 Press the switch rearward to move the pedals rearward • For vehicles equipped with Driver Memory Seat, you (toward the driver). can use your Remote Keyless Entry (RKE) transmitter or the memory switch on the driver’s door trim panel • The pedals can be adjusted with the ignition OFF. to return the adjustable pedals to pre-programmed • The pedals cannot be adjusted when the vehicle is in positions.
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not adjust the pedals while the vehicle is moving. You could lose control and have an accident. Always adjust the pedals while the vehicle is parked. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 NOTE: In order to ensure proper operation, the Electronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous.
222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pressing the RES (+) button once will result in a 1 mph (1.0 km/h) increase in set speed. Each subsequent tap of A soft tap on the brake pedal, pushing the CANCEL the button results in an increase of 1 mph (1.0 km/h). button, or normal brake pressure while slowing the vehicle will deactivate Electronic Speed Control without To decrease speed while the Electronic Speed Control is erasing the set speed memory. Pressing the ON/OFF set, push the SET (-) button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 Using Electronic Speed Control On Hills ADAPTIVE CRUISE CONTROL (ACC) — IF The transmission may downshift on hills to maintain the EQUIPPED Adaptive Cruise Control (ACC) increases the driving vehicle set speed. convenience provided by cruise control while traveling NOTE: The Electronic Speed Control system maintains on highways and major roadways. However, it is not a speed up and down hills.
224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • Adaptive Cruise Control (ACC) is a convenience system. It is not a substitute for active driving involvement. It is always the driver’s responsibility to be attentive of road, traffic, and weather conditions, vehicle speed, distance to the vehicle ahead; and, most importantly, brake operation to ensure safe operation of the vehicle under all road conditions.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 WARNING! You should switch off the ACC system: • When driving in fog, heavy rain, heavy snow, sleet, heavy traffic, and complex driving situations (e.g., in highway construction zones). • When entering a turn lane or highway off ramp; when driving on roads that are winding, icy, snowcovered, slippery, or have steep uphill or downhill slopes. • When towing a trailer up or down steep slopes. • When circumstances do not allow safe driving at a constant speed.
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Any chassis/suspension modifications to the vehicle will effect the performance of the Adaptive Cruise Control. Activating Adaptive Cruise Control (ACC) You can only activate ACC if the vehicle speed is above 20 mph (32 km/h). When the system is turned on and in the READY state, the Electronic Vehicle Information Center (EVIC) displays “Adaptive Cruise Ready.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 NOTE: You cannot enable ACC under the following conditions: • When you apply the brakes. • When the parking brake is set. 3 • When the automatic transmission is in PARK, REVERSE or NEUTRAL. • When pushing the RES + button without a previously set speed in memory. To Activate Push and release the ON/OFF button. The ACC menu in the EVIC displays “Adaptive Cruise Ready.
228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To turn the system OFF, push and release the ON/OFF button again. At this time, the system will turn off and the EVIC will display “Adaptive Cruise Control Off.” WARNING! Leaving the Adaptive Cruise Control (ACC) system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have a collision. Always leave the system off when you are not using it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 • The system will not be controlling the distance between your vehicle and the vehicle ahead. The vehicle speed will only be determined by the position of the accelerator pedal. 3 ACC Set Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set speed. If this occurs: • The message “DRIVER OVERRIDE” will display in the EVIC.
230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Cancel The system will disable ACC without erasing the memory if: • You softly tap the brake pedal. • You depress the brake pedal. • You press the CANCEL switch. • The vehicle speed goes below 15 mph (25 km/h) • An Anti-Lock Brake System (ABS) event occurs. • The transmission is shifted into NEUTRAL. Adaptive Cruise Control (ACC) Cancelled • The Electronic Stability Control/Traction Control Sys- To Turn Off tem (ESC/TCS) activates.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 To Resume Speed To Vary The Speed Setting Press the RES + button and release. Then remove your While ACC is set, you can increase the set speed by foot from the accelerator pedal. The EVIC will display the pressing and holding the RES + button. If the button is last set speed. continually pressed, the set speed will continue to increase in 5 mph (10 km/h) increments until the button is NOTE: You can resume ACC from a minimum of released.
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pressing the SET - button once will result in a 1 mph Setting The Following Distance In ACC (1 km/h) decrease in set speed. Each subsequent tap of The specified following distance for ACC can be set by the button results in a decrease of 1 mph (1 km/h). varying the distance setting between 3 (long), 2 (medium), and 1 (short).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 3 Distance Set 2 (medium) Distance Set 1 (short) To change the distance setting, press the Distance button and release. Each time the button is pressed, the distance setting adjusts between 3 (long), 2 (medium), and 1 (short).
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If there is no vehicle ahead, the vehicle will maintain the set speed. If a slower moving vehicle is detected in the same lane, the EVIC displays the “Sensed Vehicle Indicator” icon, and the system adjusts vehicle speed automatically to maintain the distance setting, regardless of the set speed. The maximum braking applied by ACC is limited; however, the driver can always apply the brakes manually, if necessary.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 3 Brake Alert 3 Brake Alert 2
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press and release the UP or DOWN button until “ACC” or “Cruise” is highlighted in the EVIC. Status of the ACC or Cruise is also displayed in the menu line. Press and release the SELECT (right arrow) button to display the following information: Adaptive Cruise Control Off • When ACC is deactivated, the display will read “Adaptive Cruise Control Off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 The ACC screen will display once again if any ACC Display Warnings And Maintenance activity occurs, which may include any of the following: “Clean Radar Sensor In Front Of Vehicle” Warning • Set Speed Change The ACC “Clean Radar Sensor In Front Of Vehicle” • Distance Setting Change • System Cancel • Driver Override • System Off • ACC Proximity Warning • ACC Unavailable Warning warning will display when conditions temporarily limit system performance.
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If the ACC “Clean Radar Sensor In Front Of • If the sensor is damaged due to a collision, see your Vehicle” warning is active Normal (Fixed Speed) Cruise authorized dealer for service. Control is still available. For additional information refer • Do not attach or install any accessories near the sensor, to “Normal (Fixed Speed) Cruise Control Mode” in this including transparent material or aftermarket grilles. section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 ACC Unavailable Warning If the system turns off, and the EVIC displays “Adaptive Cruise Control (ACC) Unavailable”, there may be a temporary malfunction that limits ACC functionality. Although the vehicle is still drivable under normal conditions, ACC will be temporarily unavailable. If this occurs, try activating ACC again later, following a key cycle. If the problem persists, see your authorized dealer.
240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adding A Trailer Hitch The weight of a trailer/hitch may affect the performance of ACC. If there is a noticeable change in performance following the installation of a trailer/hitch, or if the ACC performance does not return to normal after removing the trailer/hitch see your authorized dealer. Offset Driving ACC may not detect a vehicle in the same lane that is offset from your direct line of travel, or a vehicle merging in from a side lane.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 Using ACC On Hills When driving on hills, ACC may not detect a vehicle in your lane. Depending on the speed, vehicle load, traffic conditions, and the steepness of the hills, ACC performance may be limited. ACC may occasionally provide braking and/or a driver alert that you consider unnecessary. This may be the system’s response to signs, guardrails, and other stationary objects in a curve. This may also occur at the base of steep hills.
242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Changing ACC may not detect a vehicle until it is completely in the lane in which you are traveling. In the illustration shown, ACC has not yet detected the vehicle changing lanes and it may not detect the vehicle until it’s too late for the ACC system to take action. ACC may not detect a vehicle until it is completely in the lane. There may not be sufficient distance to the lane-changing vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 3 Stationary Objects And Vehicles ACC does not react to stationary objects and stationary vehicles. For example, ACC will not react in situations where the vehicle you are following exits your lane and the vehicle ahead is stopped in your lane. Always be attentive and ready to apply the brakes if necessary. General Information FCC Requirements For Vehicular Radar Systems Classification Specifications: 47 C.F.R. Part 15 47 C.F.R Part 15.
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Normal (Fixed Speed) Cruise Control Mode In addition to Adaptive Cruise Control mode, a normal (fixed speed) Cruise Control mode is available for cruising at fixed speeds. The normal Cruise Control mode is designed to maintain a set cruising speed without requiring the driver to operate the accelerator. Cruise Control can only be operated if the vehicle speed is above 20 mph (32 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 To Vary The Speed Setting To Resume There are two ways to change the set speed: Press the RES + button and then remove your foot from the accelerator pedal. The EVIC will display the last set • Use the accelerator pedal to adjust the vehicle to the speed. desired speed and press the SET - button. To Turn Off • Tap the RES + or SET - button to increase or decrease the set speed in 1 mph (1.
246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Forward Collision Warning — If Equipped The Forward Collision Warning (FCW) system provides the driver with audible and visual warnings (within the EVIC) when it detects a potential frontal collision. The warnings are intended to provide the driver with enough time to react and avoid the potential collision. FCW monitors the information from the forward looking sensor as well as the Electronic Brake Controller (EBC), wheel speed sensors, i.e.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 Changing the FCW status to the “Near” setting, allows • FCW will not react to irrelevant objects such as overthe system to warn you of a possible collision with the head objects, ground reflections, objects not in the path vehicle in front of you when you are much closer.
248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Although the vehicle is still drivable under normal conditions, FCW will be temporarily unavailable. If this occurs, try activating FCW again later, following a key cycle. If the problem persists, see your authorized dealer. PARKSENSE® PARK ASSIST — IF EQUIPPED The ParkSense® Park Assist system provides visual and audible indications of the distance between the rear and/or front fascia and a detected obstacle when backing up or moving forward, e.g.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 The six ParkSense® sensors, located in the front fascia/ bumper, monitor the area in front of the vehicle that is within the sensors’ field of view. The sensors can detect obstacles from approximately 30 cm up to 120 cm from the front fascia/bumper in the horizontal direction, deParkSense® Sensors pending on the location, type and orientation of the The four ParkSense® sensors, located in the rear fascia/ obstacle.
250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ParkSense® Warning screen is located within the Electronic Vehicle Information Center (EVIC). It provides visual warnings to indicate the distance between the rear fascia/bumper and/or front fascia/bumper and the detected obstacle. Park Assist Display ParkSense® Display The warning display will turn ON indicating the system status when the vehicle is in REVERSE or when the vehicle is in DRIVE and an obstacle has been detected.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fast Tone Continuous Tone The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 Rear Distance (in/cm) Front Distance (in/cm) Audible Alert (Chime) Greater than 59 in (150 cm) Greater than 47 in (120 cm) None Arc None WARNING ALERTS 59-39 in 39-25 in (150-100 cm) (100-65 cm) 47-39 in 39-25 in (120-100 cm) (100-65 cm) Single Slow 1/2 second tone (for rear only) (for rear only) 3 Solid 3 Slow Flashing (Continuous) 25-12 in (65-30 cm) 25-12 in (65-30 cm) Fast Less than 12 in (30 cm) Less than 12 in (30 cm) Continuous 2 Slow Flashing 1
254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the ParkSense® soft-key is pressed to disable the system, the EVIC will display the “PARK ASSIST SYSTEM OFF” message for approximately five seconds. Refer to “Electronic Vehicle Information Center (EVIC)” in “Understanding Your Instrument Panel” for further information. When the shift lever is moved to REVERSE position and ParkSense® is turned off, the instrument cluster will display “PARK ASSIST OFF” message for as long as the vehicle is in REVERSE.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 • When you turn ParkSense® off, the instrument cluster will display “PARK ASSIST OFF.” Furthermore, once you turn ParkSense® off, it remains off until you turn it on again, even if you cycle the ignition key. properly. The ParkSense® system might not detect an obstacle behind or in front of the fascia/bumper, or it could provide a false indication that an obstacle is behind or in front of the fascia/bumper.
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! • ParkSense® is only a parking aid and it is unable to recognize every obstacle, including small obstacles. Parking curbs might be temporarily detected or not detected at all. Obstacles located above or below the sensors will not be detected when they are in close proximity. • The vehicle must be driven slowly when using ParkSense® in order to be able to stop in time when an obstacle is detected.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 WARNING! (Continued) • Before using the ParkSense® Park Assist system, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the vehicle when the vehicle is not used for towing. Failure to do so can result in injury or damage to vehicles or obstacles because the hitch ball will be much closer to the obstacle than the rear fascia when the warning display turns on the single flashing arc and sounds the continuous tone.
258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When displayed, static grid lines will illustrate the width of the vehicle and will show separate zones that will help indicate the distance to the rear of the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 NOTE: If snow, ice, mud, or any foreign substance builds up on the camera lens, clean the lens, rinse with water, and dry with a soft cloth. Do not cover the lens. Turning ParkView® On Or Off — With Touch—Screen Radio OVERHEAD CONSOLE The overhead console contains courtesy/reading lights and storage for sunglasses. Universal Garage Door Opener (HomeLink®) and power sunroof switches may also be included, if equipped. 1. Turn the Radio on. 2.
260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To turn the lights off, press the switch a second time. The Lights are mounted in the overhead console. Each light lights also turn on when a door is opened. The lights will can be turned on by pressing the switch on either side of also turn on when the UNLOCK button on the RKE is pressed. the console. These buttons are backlit for night time visibility.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 Courtesy Lights Sunglasses Bin Door The courtesy lights can be turned on by pressing the top At the front of the console a compartment is provided for corner of the lens. To turn the lights off, press the lens a the storage of a pair of sunglasses. The storage compartsecond time. ment access is a “push/push” design. Push the chrome pad on the door to open. Push the chrome pad on the door to close.
262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED HomeLink® replaces up to three hand-held transmitters that operate devices such as garage door openers, motorized gates, lighting or home security systems. The HomeLink® unit is powered by your vehicles 12 Volt battery. The HomeLink® buttons, located on either the overhead console, headliner or sunvisor, designate the three different HomeLink® channels.The HomeLink® indicator is located above the center button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 Before You Begin Programming HomeLink® Be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmission of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink® system. Erase all channels before you begin programming.
264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons. • If you have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the Internet at www.HomeLink.com for information or assistance. Programming A Rolling Code For programming garage door openers that were manufactured after 1995.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 1. Cycle the ignition to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. Firmly press and release the “LEARN” or “TRAINING” button. On some garage door openers/devices there may be a light that blinks when the garage door opener/device is in the LEARN/TRAIN mode. NOTE: You have 30 seconds in which to initiate the next 3.
266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Simultaneously press and hold both the Homelink® button you want to program and the hand-held transTo reprogram a channel that has been previously trained, mitter button. follow these steps: Reprogramming A Single HomeLink® Button 4. Continue to hold both buttons and observe the indicator light. The Homelink® indicator will flash slowly 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 Canadian radio frequency laws require transmitter signals to time-out (or quit) after several seconds of transTo reprogram a channel that has been previously trained, mission – which may not be long enough for HomeLink® follow these steps: to pick up the signal during programming. Similar to this 1. Cycle the ignition to the ON/RUN position. Canadian law, some U.S. gate operators are designed to time-out in the same manner. 2.
268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Continue to press and hold the HomeLink® button, • To program the two remaining HomeLink® buttons, while you press and release (“cycle”), your hand-held repeat each step for each remaining button. DO NOT transmitter every two seconds until HomeLink® has erase the channels. successfully accepted the frequency signal.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 Using HomeLink® Troubleshooting Tips To operate, press and release the programmed HomeLink® button. Activation will now occur for the programmed device (i.e., garage door opener, gate operator, security system, entry door lock, home/office lighting, etc.,). The hand-held transmitter of the device may also be used at any time.
270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Your motorized door or gate will open and close while you are programming the universal transceiver. Do not program the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards. This includes most garage door opener models manufactured after 1982.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. Power Sunroof Switch WARNING! • Never leave children unattended in a vehicle, and do not leave the key in the ignition switch (or leave the ignition of a vehicle equipped with Keyless Enter-N-Go™ in the ACC or ON/Run position).
272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express Closing Sunroof — Express Press the switch rearward and release it within one-half second. The sunroof and sunshade will open automatically from any position. The sunroof and sunshade will open fully and stop automatically. This is called “Express Open”. During Express Open operation, any movement of the sunroof switch will stop the sunroof.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 Pinch Protect Feature Sunshade Operation This feature will detect an obstruction in the opening of the sunroof during Express Close operation. If an obstruction in the path of the sunroof is detected, the sunroof will automatically retract. Remove the obstruction if this occurs. Next, press the switch forward and release to Express Close. The sunshade can be opened manually. However, the sunshade will open automatically as the sunroof opens.
274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Ignition Off time is programmable using the Uconnect® System. Refer to “Uconnect® Settings” in Use only a nonabrasive cleaner and a soft cloth to clean “Understanding Your Instrument Panel” for further the glass panel. information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 WARNING! (Continued) CommandView® Sunroof and Power Shade Switches WARNING! • Never leave children unattended in a vehicle, and do not leave the key in the ignition switch (or leave the ignition of a vehicle equipped with Keyless (Continued) Enter-N-Go™ in the ACC or ON/Run position). Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch.
276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express Closing Sunroof — Express Press the switch rearward and release it within one-half second. The sunroof and sunshade will open automatically from any position. The sunroof and sunshade will open fully and stop automatically. This is called “Express Open”. During Express Open operation, any movement of the sunroof switch will stop the sunroof.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277 Opening Power Shade — Express Closing Power Shade — Express Press the shade switch rearward and release it within one-half second and the shade will automatically open to the halfway position and stop automatically. Press the switch a second time from the halfway position and the shade will automatically open to the full open position and stop automatically. This is called “Express Open”.
278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pinch Protect Feature open or partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs with the rear windows open, open the front and rear windows together to minimize the buffeting. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting or open any window. This feature will detect an obstruction in the opening of the sunroof during Express Close operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 279 NOTE: Insert cigar lighter or accessory plug into the power outlets for use to ensure proper operation. • For vehicles equipped with the EVIC, the power sunroof switch will remain active for up to approxi- NOTE: To ensure proper operation, a MOPAR® knob mately ten minutes after the ignition switch is turned and element must be used. to the LOCK position. Opening either front door will cancel this feature.
280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The front 12 Volt power outlet has power available only when the ignition is placed in the ACC or RUN position. WARNING! Do not place ashes inside the cubby bin located on the center console on vehicle’s not equipped with the ash receiver tray. A fire leading to bodily injury could result. The center console outlet is powered directly from the battery (power available at all times).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281 3 Center Console Power Outlet There is also a 12 volt power outlet located on the back of the center console for rear passengers. This power outlet has power available only when the ignition is placed in the ACC or RUN position.
282 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 283 CAUTION! CAUTION! (Continued) • Many accessories that can be plugged in draw power from the vehicle’s battery even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly.
284 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Front Seat Cupholders The cupholders are located in the forward edge of the center console.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 285 Press the “Cold” symbol once to turn on the cupholder; Your vehicle may be equipped with heated and cooled press the symbol a second time to turn the cupholder off. cupholders. The cupholders are designed to help keep Press the “Hot” symbol once to activate the cupholder; press the symbol a second time to turn off the cupholder. warm beverages warm and cold beverages cool.
286 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Seat Cupholders The rear seat cupholders are located in the center armrest between the rear seats. The cupholders are positioned forward in the armrest and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the rear occupant’s elbows.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 287 STORAGE Glovebox Storage The glovebox storage compartment is located on the passenger side of the instrument panel. 3 Opened Glovebox Storage Compartment Console Features Glovebox Storage Compartment There is a cubby bin located forward of the shift lever. The cubby bin is covered with a push-push actuated door. Push inward on the door to open it, push the door a second time to close it.
288 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Two separate storage compartments are also located integrated coin holder, along with additional area for underneath the center console armrest. small items like an ipod or phone. Below the upper tray, the lower storage compartment is made for larger items, like CDs and tissue boxes. In addition, the 12 volt power outlet, USB and Aux jack are located here.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 289 WARNING! Do not operate this vehicle with a console compartment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distraction, resulting in death or injury. Door Storage The door panels contain storage areas.
290 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Seat Armrest Storage — If Equipped Cargo Area — Vehicles Equipped with For rear passengers there is a storage bin located in the 60/40 Split-Folding Rear Seat armrest. Lift upward on the latch to open the storage The 60/40 split-folding rear seat provides cargo-carrying versatility. The seatbacks fold down easily by pulling compartment. nylon tabs between the seatbacks and the bolsters.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 291 WARNING! WARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. • The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion.
292 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES Trunk Mat — If Equipped A trunk mat covers the bottom of the cargo area. The trunk mat is used to protect the interior of the trunk from mud, snow, and debris. Grocery Bag Hooks The rear cargo area is equipped with grocery bag hooks, located on either side of the rear cargo area. Grocery Bag Hooks CAUTION! Do not exceed the maximum weight limit 50 lbs (22 kg) of the grocery bag hook. Damage may occur to hook and mounting surface.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 293 Cargo Net (for versions/markets where provided) REAR WINDOW FEATURES The rear cargo area is equipped with a cargo net. Rear Window Defroster The rear window defroster button is located on the climate control. Press this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on.
294 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 295 NOTE: The rear sunshade control switch can be locked out along with the rear passenger window controls from the driver switch window lockout switch.
296 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The power sunshade can also be operated by passengers in the rears seats. The power sunshade switch is located on the back of the center console between the heated seat switches. Press the switch once to raise the sunshade. Press the switch a second time to lower the sunshade.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 INSTRUMENT PANEL FEATURES . . . . . . . . . .299 ▫ Oil Change Required . . . . . . . . . . . . . . . . . .320 䡵 INSTRUMENT CLUSTER . . . . . . . . . . . . . . . . .300 ▫ Fuel Economy . . . . . . . . . . . . . . . . . . . . . . . .320 䡵 INSTRUMENT CLUSTER DESCRIPTIONS . . . . .301 ▫ Cruise Control. . . . . . . . . . . . . . . . . . . . . . . .323 䡵 ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) . . . . . . . . . . . . . . . . . . . . . . .
298 UNDERSTANDING YOUR INSTRUMENT PANEL 䡵 Uconnect® SETTINGS . . . . . . . . . . . . . . . . . . .329 䡵 STEERING WHEEL AUDIO CONTROLS . . . . . .350 ▫ Hard-Keys . . . . . . . . . . . . . . . . . . . . . . . . . .329 ▫ Radio Operation . . . . . . . . . . . . . . . . . . . . . .351 ▫ Soft-Keys . . . . . . . . . . . . . . . . . . . . . . . . . . .329 ▫ CD Player . . . . . . . . . . . . . . . . . . . . . . . . . . .351 ▫ Customer Programmable Features — 䡵 CD/DVD DISC MAINTENANCE . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 299 INSTRUMENT PANEL FEATURES 4 1 2 3 4 5 6 7 — Air Outlet — Instrument Cluster — Hazard Switch — Uconnect® System — Climate Control Hard Controls — Glove Compartment — ESC Off Switch 8 — Uconnect® System Hard Controls 9 — SD Memory Card Slot 10 — Power Outlet 11 — CD/DVD Slot 12 — Storage Compartment 13 — Engine Start/Stop Button 14 — Trunk Release Button 15 16 17 18 19 — Dimmer Controls — Hood Release — Headlight Switch — Analog Clock — Paddle Shifters
300 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL 301 If the vehicle electronics sense that the vehicle is driven more than 1 mile (1.6 km) with either turn signal on, a 1. Tachometer continuous chime will sound to alert you to turn the The red segments indicate the maximum permissible signals off. If either indicator flashes at a rapid rate, check engine revolutions per minute (RPM x 1000) for each gear for a defective outside light bulb. range. Before reaching the red area, ease up on the 4.
302 UNDERSTANDING YOUR INSTRUMENT PANEL 6. Odometer Display / Electronic Vehicle Information Electronic Vehicle Information Center (EVIC) Display Center (EVIC) Display The Electronic Vehicle Information Center (EVIC) feaOdometer Display tures a driver-interactive display that is located in the The odometer display shows the total distance the ve- instrument cluster. For further information, refer to “Electronic Vehicle Information Center (EVIC)”. hicle has been driven. U.S.
UNDERSTANDING YOUR INSTRUMENT PANEL 303 7.
304 UNDERSTANDING YOUR INSTRUMENT PANEL TPMS from functioning properly. Always check the 8. Malfunction Indicator Light (MIL) TPMS malfunction telltale after replacing one or more The Malfunction Indicator Light (MIL) is part of tires or wheels on your vehicle, to ensure that the an onboard diagnostic system, called OBD, that replacement or alternate tires and wheels allow the TPMS monitors engine and automatic transmission conto continue to function properly. trol systems.
UNDERSTANDING YOUR INSTRUMENT PANEL 305 CAUTION! Prolonged driving with the Malfunction Indicator Light (MIL) on could cause damage to the engine control system. It also could affect fuel economy and drivability. If the MIL is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required. 9. Speedometer Indicates vehicle speed. 10. Fuel Door Reminder The arrow in this symbol is a reminder that the Fuel Filler Door is located on the left side of the vehicle. 11.
306 UNDERSTANDING YOUR INSTRUMENT PANEL driving, have the system inspected at an authorized 14. Sport Suspension dealer as soon as possible. Refer to “Occupant Restraints” The light will illuminate when Sport or Track in “Things To Know Before Starting Your Vehicle” for mode is selected. When Sport mode is selected, further information. the EVIC will display “Sport Mode Active 13. Sport Shifting (Suspension)”.
UNDERSTANDING YOUR INSTRUMENT PANEL 307 15. Anti-Lock Brake (ABS) Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition switch is turned to the ON/RUN position and may stay on for as long as four seconds. 16. Vehicle Security Light — If Equipped This light will flash at a fast rate for approximately 15 seconds, when the vehicle security alarm is arming, and then will flash slowly until the vehicle is disarmed.
308 UNDERSTANDING YOUR INSTRUMENT PANEL If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir, it indicates a possible brake hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system. In this case, the light will remain on until the condition has been corrected.
UNDERSTANDING YOUR INSTRUMENT PANEL 309 ON/RUN position. It should go out with the engine running. If the “ESC Activation/Malfunction Indicator Light” comes on continuously with the engine running, a malfunction has been detected in the ESC system.
310 UNDERSTANDING YOUR INSTRUMENT PANEL The ESC system will make buzzing or clicking sounds 21. Temperature Gauge when it is active. This is normal; the sounds will stop The temperature gauge shows engine coolant temperawhen ESC becomes inactive following the maneuver that ture. Any reading within the normal range indicates that caused the ESC activation. the engine cooling system is operating satisfactorily. 20.
UNDERSTANDING YOUR INSTRUMENT PANEL 311 WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call an authorized dealer for service if your vehicle overheats. If you decide to look under the hood yourself, see “Maintaining Your Vehicle”. Follow the warnings under the Cooling System Pressure Cap paragraph.
312 UNDERSTANDING YOUR INSTRUMENT PANEL This system allows the driver to select a variety of useful The system allows the driver to select information by information by pressing the switches mounted on the pressing the following buttons mounted on the steering steering wheel.
UNDERSTANDING YOUR INSTRUMENT PANEL 313 UP Button BACK Button Press and release the UP button to scroll upPress the BACK button to return to the main menu from an info screen or sub-menu item. ward through the main menu and Vehicle Info and Trip Info sub-menus (Fuel Economy, Vehicle Info, Tire PSI, Cruise, Messages) and Electronic Vehicle Information Center (EVIC) sub-menus. Displays DOWN Button The EVIC display consists of three sections: Press and release the DOWN button to scroll 1.
314 UNDERSTANDING YOUR INSTRUMENT PANEL messages that consist of approximately 60 possible warn- • Unstored Messages Until RUN ing or information messages. These pop up messages fall These messages deal primarily with the Remote Start feature. This message type is displayed until the ignition into several categories: is in the RUN state.
UNDERSTANDING YOUR INSTRUMENT PANEL 315 EVIC White Telltales This area will show reconfigurable white caution telltales. These telltales include: • Shift Lever Status • Electronic Speed Control SET This telltale will illuminate when the electronic speed control is SET. For further information, refer to “Electronic Speed Control” in “Understanding The Features Of Your Vehicle.
316 UNDERSTANDING YOUR INSTRUMENT PANEL EVIC Amber Telltales This area will show reconfigurable amber caution telltales. These telltales include: • Windshield Washer Fluid Low Indicator This telltale will turn on to indicate the windshield washer fluid is low. • Forward Collision Warning (FCW) OFF This telltale informs the driver that the For- • Adaptive Cruise Control (ACC) Malfunction ward Collision Warning feature is Off.
UNDERSTANDING YOUR INSTRUMENT PANEL 317 Do not operate the vehicle until the cause is corrected. This area will show reconfigurable red telltales. These This light does not show how much oil is in the engine. The engine oil level must be checked under the hood. telltales include: • Charging System Telltale • Door Ajar EVIC Red Telltales This telltale shows the status of the electrical This telltale turns on when one or more doors charging system. If the telltale stays on or comes are ajar.
318 UNDERSTANDING YOUR INSTRUMENT PANEL • Electronic Throttle Control (ETC) Telltale • Engine Temperature Warning Telltale This telltale informs you of a problem with the This telltale warns of an overheated engine condition. As temperatures rise and the gauge apElectronic Throttle Control (ETC) system. If the telltale comes on while driving, have the sys- proaches H, or 260°F, this telltale will illuminate and a tem checked by an authorized dealer. single chime will sound after reaching a set threshold.
UNDERSTANDING YOUR INSTRUMENT PANEL 319 • Transmission Temperature Warning Telltale This telltale indicates that the transmission fluid temperature is running hot. This may occur with severe usage, such as trailer towing. If this telltale turns on, safely pull over and stop the vehicle. Then, shift the transmission into NEUTRAL and run the engine at idle or faster until the light turns off.
320 UNDERSTANDING YOUR INSTRUMENT PANEL Oil Change Required Your vehicle is equipped with an engine oil change indicator system. The ⬙Oil Change Due⬙ message will display in the EVIC for five seconds after a single chime has sounded at the start of each ignition that an oil change is due. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style.
UNDERSTANDING YOUR INSTRUMENT PANEL 321 Average Fuel Economy / ECO Fuel Saver Mode — If Equipped Shows the average fuel economy since the last reset. When Average Fuel Economy is selected, The word ⬙RESET>⬙ (with right arrow) appears next to it. Pressing the right arrow button will reset Average Fuel Economy which displays ⬙0⬙ immediately after reset. Then, the history information will be erased, and the averaging will continue from the last fuel average reading before the reset.
322 UNDERSTANDING YOUR INSTRUMENT PANEL When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change to a “LOW FUEL” message. This display will continue until the vehicle runs out of fuel. Adding a significant amount of fuel to the vehicle will turn off the “LOW Distance To Empty (DTE) FUEL” message and a new DTE value will display. Press Shows the estimated distance that can be traveled with the BACK button to return to the main menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 323 Cruise Control change. If Cruise is active and a warning or other feature is in the EVIC main display, the Cruise status will be displayed in place of the EVIC odometer line. Press and release the UP or DOWN button until ⬙ACC⬙ (if equipped with Adaptive Cruise Control) or ⬙Cruise⬙ is highlighted in the EVIC. Status of the ACC or Cruise is Press and release the BACK button to return to the main displayed in the menu line also. Press and release the menu.
324 UNDERSTANDING YOUR INSTRUMENT PANEL Trip Info Trip B Press and release the UP or DOWN button until ⬙Trip Shows the total distance traveled for Trip B since the last Info⬙ is highlighted in the EVIC. Press and release the reset. SELECT button to display the following three trip feaElapsed Time tures in the next screen: Shows the total elapsed time of travel since the last reset. • Trip A Elapsed time will increment when the ignition is in the ON or START position.
UNDERSTANDING YOUR INSTRUMENT PANEL 325 Tire PSI Press and release the UP or DOWN button until ⬙Tire PSI⬙ is highlighted in the EVIC. Press and release the SELECT button and one of the following will be displayed: • If tire pressure is OK for all tires a vehicle ICON is displayed with tire pressure values in each corner of the ICON. • If one or more tires have low pressure, ⬙Tire Pressure LOW⬙ is displayed with the vehicle ICON and the tire pressure values in each corner of the ICON.
326 UNDERSTANDING YOUR INSTRUMENT PANEL The Performance Features include the following: The following describes each feature and its operation: • 0-60 mph (0-100 km/h) Timers • Braking Distance 0-60 mph (0-100 km/h) • 1/8 Mile When selected, this screen displays the time it takes for the vehicle to go from 0 to 60 mph (0 to 100 km/h) within 10 seconds. • 1/4 Mile • Instantaneous G-Force • Peak G-Force • The feature will “ready” when the vehicle speed is at 0 mph (0 km/h).
UNDERSTANDING YOUR INSTRUMENT PANEL 327 • The distance and speed measurements will continue to display until the conditions are met for another event When selected, this screen displays the vehicle’s braking to be recorded. distance and the speed at which the brake pedal was depressed. • Pressing the SELECT button will clear the current run and prepare the cluster to record a new run. • This feature will only function when applying the brakes at speeds above 30 mph (48 km/h).
328 UNDERSTANDING YOUR INSTRUMENT PANEL Instantaneous G-Force Vehicle Info (Customer Information Features) When selected, this screen displays the current G-Force Press and release the UP or DOWN button until ⬙Vehicle Info⬙ is highlighted in the EVIC. Press and release the (lateral and longitudinal). SELECT button and Coolant Temp will be displayed. Peak G-Force Press the UP or DOWN button to scroll through the When selected, this screen displays all four G-Force following information displays.
UNDERSTANDING YOUR INSTRUMENT PANEL 329 • Trans Temperature Uconnect® SETTINGS Displays the actual transmission temperature. Displays the number of hours of engine operation. The Uconnect® system uses a combination of soft and hard keys located on the center of the instrument panel that allows you to access and change the customer programmable features. Messages # Hard-Keys Select from Main Menu using the UP or DOWN buttons.
330 UNDERSTANDING YOUR INSTRUMENT PANEL Customer Programmable Features — Uconnect® 8.4 Settings Press the More soft-key, then press the Settings soft-key to display the menu setting screen. In this mode the Uconnect® system allows you to access programmable features that may be equipped such as Display, Clock, Safety/Assistance, Lights, Doors & Locks, Auto-On Comfort & Remote Start, Engine Off Operation, Compass Settings, Audio, Phone/Bluetooth® and SIRIUS Setup.
UNDERSTANDING YOUR INSTRUMENT PANEL 331 • Display Brightness With Headlights OFF Metric until a check-mark appears next to the setting, showing that setting has been selected. Touch the back When in this display, you may select the brightness with the arrow soft-key to return to the previous menu. headlights off. Adjust the brightness with the + and – setting soft-keys or by selecting any point on the scale between the • Voice Response Length + and – soft-keys. Then touch the arrow back soft-key.
332 UNDERSTANDING YOUR INSTRUMENT PANEL • Navigation Turn-By-Turn In Cluster Clock When this feature is selected, the turn-by-turn directions will appear in the display as the vehicle approaches a designated turn within a programmed route. To make your selection, touch the Navigation Turn-By-Turn In Cluster soft-key, until a check-mark appears next to the setting, showing that setting has been selected. Touch the back arrow soft-key to return to the previous menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 333 • Set Time Minutes until a check-mark appears next to setting, showing that setting has been selected. Touch the back arrow soft-key When in this display, you may adjust the minutes. The to return to the previous menu. Sync with GPS Time soft-key must be unchecked. To make your selection touch the + or - soft-keys to adjust Safety / Assistance the minutes up or down.
334 UNDERSTANDING YOUR INSTRUMENT PANEL For further information, refer to “Adaptive Cruise Con- • Tilt Mirrors In Reverse trol (ACC)” in “Understanding The Features Of Your When this feature is selected, the outside sideview mirVehicle”. rors will tilt downward when the ignition is in the RUN • Park Assist position and the transmission shift lever is in the REVERSE position.
UNDERSTANDING YOUR INSTRUMENT PANEL 335 When this mode is selected, the Blind Spot Monitor (BSM) system is activated and will only show a visual alert in the outside mirrors. When “Lights & Chime” mode is activated, the Blind Spot Monitor (BSM) will show a visual alert in the outside mirrors as well as an audible alert when the turn signal is on. When “Off” is selected, the Blind Spot Monitor (BSM) system is deactivated.
336 UNDERSTANDING YOUR INSTRUMENT PANEL • Rain Sensing Auto Wipers • Headlight Illumination On Approach When this feature is selected, the system will automatically activate the windshield wipers if it senses moisture on the windshield. To make your selection, touch the Rain Sensing soft-key, until a check-mark appears next to setting, showing that setting has been selected. Touch the back arrow soft-key to return to the previous menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 337 • Auto Dim High Beams “SmartBeam™” — If Equipped When this feature is selected, the high beam headlights will deactivate automatically under certain conditions. To make your selection, touch the Auto High Beams softkey, until a check-mark appears next to setting, showing that setting has been selected. Touch the back arrow soft-key to return to the previous menu.
338 UNDERSTANDING YOUR INSTRUMENT PANEL a check-mark appears next to setting, showing that setting has been selected. Touch the back arrow soft-key After pressing the Doors & Locks soft-key the following to return to the previous menu. settings will be available. • Sound Horn With Lock • Auto Unlock On Exit Doors & Locks When this feature is selected, all doors will unlock when the vehicle is stopped and the transmission is in the PARK or NEUTRAL position and the driver’s door is opened.
UNDERSTANDING YOUR INSTRUMENT PANEL 339 • 1st Press Of Key Fob Unlocks touching the handle more than once will only result in the driver’s door opening. If driver door first is selected, once When 1st Press Of Key Fob Unlocks is selected, only the the driver door is opened, the interior door lock/unlock driver’s door will unlock on the first press of the Remote switch can be used to unlock all doors (or use RKE Keyless Entry (RKE) transmitter UNLOCK button. When transmitter).
340 UNDERSTANDING YOUR INSTRUMENT PANEL • Memory To FOB — If Equipped • Horn With Remote Start This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. To make your selection, touch the Memory Linked To FOB soft-key, until a check-mark appears next to setting, showing that setting has been selected. Touch the back arrow soft-key to return to the previous menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 341 power outlets will remain active for up to 10 minutes after the ignition is cycled to OFF. Opening either front door will After pressing the Engine Off Options soft-key the folcancel this feature. To change the Engine Off Power Delay lowing settings will be available. status touch the 0 seconds, 45 seconds, 5 minutes or • Easy Exit Seat 10 minutes soft-key. Then touch the arrow back soft-key.
342 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Settings After pressing the Compass Settings soft-key the following settings will be available. • Variance Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differences the variance should be set for the zone where the vehicle is driven, per the zone map. Once properly set, the compass will automatically compensate for the differences, and provide the most accurate compass heading.
UNDERSTANDING YOUR INSTRUMENT PANEL 343 calibrate the compass by pressing the ON soft-key and completing one or more 360-degree turns (in an area free from large metal or metallic objects) until the CAL indicator displayed in the EVIC turns off. The compass will now function normally. NOTE: Bass/Mid/Treble allow you to simply slide your finger up or down to change the setting as well as touch directly on the desired setting.
344 UNDERSTANDING YOUR INSTRUMENT PANEL your selection, touch the Channel Skip soft-key, select the channels you would like to skip followed by pressing the After pressing the Phone/Bluetooth® soft-key the folarrow back soft-key. lowing settings will be available. • Subscription Information • Paired Devices Phone/Bluetooth® This feature shows which phones are paired to the New vehicle purchasers or lessees will receive a free Phone/Bluetooth® system.
UNDERSTANDING YOUR INSTRUMENT PANEL 345 SRT Performance Features The Performance Features include the following: To access the SRT Performance Features, touch the “SRT & • Timers More” soft-key then touch the “SRT Performance” soft-key. Press the UP or DOWN soft-key to cycle through the • Engine Values features. Press the feature soft-key to select that feature.
346 UNDERSTANDING YOUR INSTRUMENT PANEL The following describes each feature and its operation: Braking Distance Timers When selected, this screen displays the vehicle’s braking distance and the speed at which the brake pedal was depressed. 0-60 mph (0-100 km/h), 1/8 Mile, 1/4 Mile When selected, this screen displays the time it takes for the vehicle to go from 0 to 60 mph (0 to 100 km/h), • This feature will only function when applying the brakes at speeds above 30 mph (48 km/h).
UNDERSTANDING YOUR INSTRUMENT PANEL 347 When a force greater than zero is measured, the display Gauges 2 will update the value as it climbs. As the G-Force falls, When selected, this screen displays the following values: the peak forces will continue to display. • Coolant Temperature Gauges 1 Shows the actual coolant temperature within the range of When selected, this screen displays the following values: the gauge.
348 UNDERSTANDING YOUR INSTRUMENT PANEL • Oil Pressure SETTING THE ANALOG CLOCK Shows the actual oil pressure. To set the analog clock at the top center of the instrument panel, press and hold the button until the setting is correct. • Battery Voltage Shows the actual battery voltage. Engine When selected, this screen displays miles per hour (mph), horsepower (hp), torque (ft/lb), oil pressure (psi) and gear selector values.
UNDERSTANDING YOUR INSTRUMENT PANEL 349 iPod®/USB/MP3 CONTROL HARMAN KARDON® Logic7® HIGH This feature allows an iPod® or external USB device to be PERFORMANCE MULTICHANNEL SURROUND SOUND SYSTEM WITH DRIVER-SELECTABLE plugged into the USB port. SURROUND (DSS) — IF EQUIPPED iPod® control supports Mini, 4G, Photo, Nano, 5G iPod® Your vehicle is equipped with a Harman Kardon® audio and iPhone® devices.
350 UNDERSTANDING YOUR INSTRUMENT PANEL The Harman Kardon® audio system offers the ability to choose Logic 7® surround sound for any audio source. The GreenEdge high-efficiency speaker designs ensure the system has higher SPL and a dramatic increase in dynamic sound quality. The speakers are tuned for maximum efficiency and perfectly matched to the amplifier output stage ensuring state of the art multi-seat surround sound processing.
UNDERSTANDING YOUR INSTRUMENT PANEL 351 The right-hand control is a rocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume, and pressing the bottom of the rocker switch will decrease the volume. The button located in the center of the left-hand control will tune to the next preset station that you have programmed in the radio preset pushbutton.
352 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particular To keep a CD/DVD in good condition, take the following disc, it may be damaged (i.e., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, precautions: or have protection encoding. Try a known good disc 1. Handle the disc by its edge; avoid touching the before considering disc player service. surface. RADIO OPERATION AND MOBILE PHONES 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 353 CLIMATE CONTROLS General Overview The air conditioning and heating system is designed to Hard-Keys make you comfortable in all types of weather. This The hard-keys located below the Uconnect® screen. system can be operated through either the Automatic Climate Controls on the instrument panel or through the Uconnect® system display. When the Uconnect® system is in different modes (Radio, Player, Settings, More, etc.
354 UNDERSTANDING YOUR INSTRUMENT PANEL Soft-Keys Soft-keys are accessible on the Uconnect® system screen. Button Descriptions (Applies To Both Hard-keys And Soft-keys) 1. MAX A/C Button Press and release to change the current setting, the indicator illuminates when MAX A/C is ON. Performing this function again will cause the MAX A/C operation to switch into manual mode and the MAX A/C indicator will turn off. 2. A/C Button Uconnect® 8.
UNDERSTANDING YOUR INSTRUMENT PANEL 355 4. AUTO Operation Button 6. Rear Defrost Button Automatically controls the interior cabin temperature by adjusting airflow distribution and amount. Performing this function will cause the ATC to switch between manual mode and automatic modes. Refer to “Automatic Operation” for more information. Press and release this button to turn on the rear window defroster and the heated outside mirrors (if equipped).
356 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! (Continued) • Do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window. • Keep all objects a safe distance from the window. 9. Passenger Temperature Control Down Button Provides the passenger with independent temperature control. Push the button for cooler temperature settings. NOTE: Pressing this button while in Sync mode will automatically exit Sync. 7. Rear Climate Button 10.
UNDERSTANDING YOUR INSTRUMENT PANEL 357 11. Blower Control Soft-key Blower control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available. Adjusting the blower will cause automatic mode to switch to manual operation. The speeds can be selected using either hard-heys or soft-keys as follows: Use the small blower icon to reduce the blower setting and the large blower icon to increase the blower setting.
358 UNDERSTANDING YOUR INSTRUMENT PANEL Defrost Mode Bi-Level Mode Air comes from the instrument panel outlets and Air comes from the windshield and side window demist outlets. Use Defrost mode with maximum floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. temperature settings for best windshield and side window defrosting and defogging.
UNDERSTANDING YOUR INSTRUMENT PANEL 359 15. Driver Temperature Control Up Button NOTE: Provides the driver with independent temperature con- • If fog or mist appears on the windshield or side glass, select Defrost mode and increase blower speed. trol. Push the button for warmer temperature settings.
360 UNDERSTANDING YOUR INSTRUMENT PANEL In MAX A/C, the blower level and mode position can be adjusted to desired user settings. Pressing other settings will cause the MAX A/C operation to switch to the prior settings and the MAX A/C indicator will turn off. improve window clearing operation. Recirculation will be disabled automatically if this mode is selected. Attempting to use Recirculation while in this mode will cause the LED in the control button to blink and then turn off.
UNDERSTANDING YOUR INSTRUMENT PANEL 361 3. When the system is set up for your comfort level, it is Manual Operation not necessary to change the settings. You will experi- The system allows for manual selection of blower speed, ence the greatest efficiency by simply allowing the air distribution mode, A/C status and recirculation control. system to function automatically. The blower fan speed can be set to any fixed speed by NOTE: adjusting the blower control.
362 UNDERSTANDING YOUR INSTRUMENT PANEL Summer Operation Winter Operation The engine cooling system in air-conditioned vehicles must be protected with a high-quality antifreeze coolant to provide proper corrosion protection and to protect against engine overheating. A solution of 50% OAT (Organic Additive Technology) coolant that meets the requirements of Chrysler Material Standard MS-12106 and 50% water is recommended.
UNDERSTANDING YOUR INSTRUMENT PANEL 363 Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem increase blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather.
STARTING AND OPERATING CONTENTS 䡵 STARTING PROCEDURES . . . . . . . . . . . . . . . .369 䡵 AUTOMATIC TRANSMISSION . . . . . . . . . . . .375 ▫ Automatic Transmission . . . . . . . . . . . . . . . .370 ▫ Key Ignition Park Interlock. . . . . . . . . . . . . . .376 ▫ Keyless Enter-N-Go™ . . . . . . . . . . . . . . . . . .370 ▫ Brake/Transmission Shift Interlock System . . .376 ▫ Normal Starting. . . . . . . . . . . . . . . . . . . . . . .371 ▫ Five-Speed Automatic Transmission . . . . . . . .
366 STARTING AND OPERATING 䡵 DRIVING ON SLIPPERY SURFACES . . . . . . . . .390 䡵 ELECTRONIC BRAKE CONTROL SYSTEM . . . .400 ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . . . . .390 ▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . .400 ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . .391 ▫ Traction Control System (TCS) . . . . . . . . . . . .400 䡵 DRIVING THROUGH WATER . . . . . . . . . . . . .391 ▫ Brake Assist System (BAS) . . . . . . . . . . . . . . .
STARTING AND OPERATING 367 ▫ Tire Identification Number (TIN). . . . . . . . . . .413 ▫ Compact Spare Tire – If Equipped . . . . . . . . .425 ▫ Tire Terminology And Definitions . . . . . . . . . .415 ▫ Full Size Spare – If Equipped . . . . . . . . . . . . .426 ▫ Tire Loading And Tire Pressure . . . . . . . . . . .416 ▫ Limited-Use Spare – If Equipped . . . . . . . . . .426 䡵 TIRES — GENERAL INFORMATION. . . . . . . . .420 ▫ Tire Spinning . . . . . . . . . . . . . . . . . . . . . . . .
368 STARTING AND OPERATING 䡵 FUEL REQUIREMENTS . . . . . . . . . . . . . . . . . .440 䡵 ADDING FUEL . . . . . . . . . . . . . . . . . . . . . . . .444 ▫ 6.4L Engine . . . . . . . . . . . . . . . . . . . . . . . . . .440 ▫ Emergency Fuel Filler Door Release. . . . . . . . .446 ▫ Reformulated Gasoline . . . . . . . . . . . . . . . . .440 䡵 VEHICLE LOADING . . . . . . . . . . . . . . . . . . . .447 ▫ Gasoline/Oxygenate Blends . . . . . . . . . . . . . .441 ▫ Vehicle Certification Label . . . . . . . . . .
STARTING AND OPERATING 369 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
370 STARTING AND OPERATING Automatic Transmission CAUTION! (Continued) The shift lever must be in the NEUTRAL or PARK position before you can start the engine. Apply the brakes before shifting into any driving gear. CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Do not shift from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Shift into PARK only after the vehicle has come to a complete stop.
STARTING AND OPERATING 371 Normal Starting Using The ENGINE START/STOP Button To Turn Off The Engine Using ENGINE START/STOP Button 1. The transmission must be in PARK or NEUTRAL. 1. Place the shift lever in PARK, then press and release the ENGINE START/STOP button. 2. Press and hold the brake pedal while pressing the ENGINE START/STOP button once. 2. The ignition switch will return to the OFF position. 3.
372 STARTING AND OPERATING NOTE: If the ignition switch is left in the ACC or RUN 3. Press the ENGINE START/STOP button a second time (engine not running) position and the transmission is in to change the ignition switch to the RUN position PARK, the system will automatically time out after (EVIC displays “RUN”), 30 minutes of inactivity and the ignition will switch to the 4. Press the ENGINE START/STOP button a third time OFF position.
STARTING AND OPERATING 373 If Engine Fails To Start WARNING! (Continued) WARNING! • Never pour fuel or other flammable liquid into the throttle body air inlet opening in an attempt to start the vehicle. This could result in flash fire causing serious personal injury. • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way.
374 STARTING AND OPERATING The starter motor will engage automatically, run for The engine block heater must be plugged in at least one 10 seconds, and then disengage. Once this occurs, release hour to have an adequate warming effect on the engine. the accelerator pedal and the brake pedal, wait 10 to The engine block heater cord is routed under the hood on 15 seconds, then repeat the “Normal Starting” procedure. the driver side of the vehicle.
STARTING AND OPERATING 375 AUTOMATIC TRANSMISSION CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift between PARK, REVERSE, NEUTRAL, or DRIVE when the engine is above idle speed. • Before shifting into any gear, make sure your foot is firmly pressing the brake pedal.
376 STARTING AND OPERATING WARNING! (Continued) • When leaving the vehicle, always remove the key fob and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. • Children should be warned not to touch the parking brake, brake pedal or the shift lever.
STARTING AND OPERATING 377 Five-Speed Automatic Transmission The shift lever position display (located in the instrument cluster) indicates the transmission gear range. You must press the brake pedal to move the shift lever out of PARK (refer to “Brake/Transmission Shift Interlock System” in this section). To drive, move the shift lever from PARK or NEUTRAL to the DRIVE position. The transmission shift lever has only PARK, REVERSE, NEUTRAL, and DRIVE shift positions.
378 STARTING AND OPERATING When parking on a level surface, you may shift the transmission into PARK first, and then apply the parking • After selecting any gear range, wait a moment to allow brake. the selected gear to engage before accelerating. This is When parking on a hill, apply the parking brake before especially important when the engine is cold.
STARTING AND OPERATING 379 WARNING! (Continued) WARNING! (Continued) • Your vehicle could move and injure you and others if it is not completely in PARK. Check by trying to move the shift lever out of PARK with the brake pedal released. Make sure the transmission is in PARK before leaving the vehicle. • It is dangerous to shift out of PARK or NEUTRAL if the engine speed is higher than idle speed.
380 STARTING AND OPERATING WARNING! (Continued) CAUTION! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever.
STARTING AND OPERATING 381 • Look at the shift lever position display and verify that it indicates the PARK position. • With brake pedal released, verify that the shift lever will not move out of PARK REVERSE This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop. NEUTRAL Use this range when the vehicle is standing for prolonged periods with the engine running. The engine may be started in this range.
382 STARTING AND OPERATING DRIVE SPORT This range should be used for most city and highway driving. It provides the smoothest upshifts and downshifts, and the best fuel economy. The transmission automatically upshifts through underdrive first, second, and third gears, direct fourth gear and overdrive fifth gear. The DRIVE position provides optimum driving characteristics under all normal operating conditions. This mode alters the transmission’s automatic shift schedule for sportier driving.
STARTING AND OPERATING 383 is selected. PARK, REVERSE, and NEUTRAL will continue to operate. The Malfunction Indicator Light (MIL) may be illuminated. Limp Home Mode allows the vehicle to be driven to an authorized dealer for service without damaging the transmission. NOTE: Even if the transmission can be reset, we recommend that you visit your authorized dealer at your earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could recur.
384 STARTING AND OPERATING AUTOSTICK® Steering Wheel Mounted Paddle Shifters Or Console Mounted Shifter AutoStick® is a driver-interactive transmission feature providing manual shift control, giving you more control of the vehicle. AutoStick® allows you to maximize engine braking, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance.
STARTING AND OPERATING 385 overspeed condition would result. It will remain in the selected gear until another upshift or downshift is chosen, When the shift lever is in the DRIVE position, the transexcept as described below. mission will operate automatically, shifting between the five available gears.
386 STARTING AND OPERATING • The transmission will automatically downshift to first gear when coming to a stop. After a stop, the driver should manually upshift (+) the transmission as the vehicle is accelerated. • You can start out, from a stop, in first or second gear. Tapping (+) (at a stop) will allow starting in second gear. Starting out in second gear is helpful in snowy or icy conditions. • The system will ignore attempts to upshift at too low of a vehicle speed.
STARTING AND OPERATING 387 • Automatic (Auto) Mode — This is the default position when vehicle ignition is first turned on. This mode will This vehicle is equipped with an electronic controlled give a sporty, but comfortable ride. Within this mode, the damping system. This system reduces body roll and pitch suspension will adapt to the vehicle inputs, including in many driving situations including cornering, acceleravehicle speed, steering inputs, braking and acceleration. tion and braking.
388 STARTING AND OPERATING • AUTO mode will provide a sporty comfortable ride, LAUNCH MODE – IF EQUIPPED where as SPORT or TRACK will be a firmer, sportier This vehicle is equipped with a Launch Control system that suspension with better handling. is designed to allow the driver to achieve maximum vehicle • Track Mode — This mode includes SPORT suspension acceleration in a straight line.
STARTING AND OPERATING 389 • Launch Control should only be used when the engine 5. Hold the brake and make sure the vehicle is in “Drive”. and transmission are at operating temperature. 6. While holding the brake, rapidly apply the accelerator pedal to wide open throttle. The engine speed will hold • Launch Control is intended to be used on dry, paved at approximately 1825 RPM for the quickest launch. road surfaces only. Use on slippery or loose surfaces may cause damage to vehicle components.
390 STARTING AND OPERATING Launch control will abort before launch completion and DRIVING ON SLIPPERY SURFACES display “Launch Aborted” in the cluster under any the Acceleration following conditions: Rapid acceleration on snow covered, wet, or other slip• The accelerator pedal is released during launch. ESC pery surfaces may cause the driving wheels to pull system continues in ESC Partial. erratically to the right or left.
STARTING AND OPERATING 391 Traction DRIVING THROUGH WATER When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability. To reduce this possibility, the following precautions should be observed: Driving through water more than a few inches/centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. 1.
392 STARTING AND OPERATING Shallow Standing Water CAUTION! (Continued) Although your vehicle is capable of driving through shallow standing water, consider the following Caution and Warning before doing so. CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
STARTING AND OPERATING 393 WARNING! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes.
394 STARTING AND OPERATING • Upon initial start-up in cold weather, the power steering pump may make noise for a short amount of time. This is due to the cold, thick fluid in the steering system. This noise should be considered normal, and it does not in any way damage the steering system. WARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible.
STARTING AND OPERATING 395 WARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to ensure accurate fluid level reading. Do not overfill. Use only manufacturer’s recommended power steering fluid. FUEL SAVER TECHNOLOGY — IF EQUIPPED This feature offers improved fuel economy by shutting off four of the engine’s eight cylinders during light load and cruise conditions.
396 STARTING AND OPERATING To release the parking brake, press the park brake pedal NOTE: a second time and let your foot up as you feel the brake • When the parking brake is applied and the transmisdisengage. sion is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • This light only shows that the parking brake is applied.
STARTING AND OPERATING 397 WARNING! WARNING! (Continued) • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
398 STARTING AND OPERATING CAUTION! If the “Brake Warning Light” remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. self check cycle to ensure that the ABS is working properly. This self check occurs each time the vehicle is started and accelerated past 7 mph (11 km/h). ABS is activated during braking under certain road or stopping conditions.
STARTING AND OPERATING 399 WARNING! WARNING! (Continued) • The ABS contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability. Installation of such equipment should be performed by qualified professionals. • Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to a collision.
400 STARTING AND OPERATING ELECTRONIC BRAKE CONTROL SYSTEM Your vehicle is equipped with an advanced electronic brake control system that include Anti-Lock Brake System (ABS), Traction Control System (TCS), Brake Assist System (BAS), and the Electronic Stability Control (ESC). All four of these systems work together to enhance vehicle stability and control in various driving conditions. Also, your vehicle may be equipped with Hill Start Assist (HSA), Ready Alert Braking, and Rain Brake Support.
STARTING AND OPERATING 401 Brake Assist System (BAS) This system complements the ABS by optimizing the vehicle braking capability during emergency brake maneuvers. This system detects an emergency braking situation by sensing the rate and amount of brake application and then applies optimum pressure to the brakes. This can help reduce braking distances. Applying the brakes very quickly results in the best BAS assistance.
402 STARTING AND OPERATING Electronic Stability Control (ESC) This system enhances directional control and stability of the vehicle under various driving conditions. The ESC corrects for oversteering and understeering the vehicle by applying the brake of the appropriate wheel. Engine power may also be reduced to assist in counteracting the condition of oversteer or understeer and help the vehicle maintain the desired path.
STARTING AND OPERATING 403 The “ESC Off” switch is located in the switch bank near the bottom center of the instrument panel. To enter the The ESC system has three available operating modes: “Partial Off” mode, momentarily press the “ESC Off” ESC On switch and the “ESC Activation/Malfunction Indicator This is the normal operating mode for the ESC. When- Light” will illuminate.
404 STARTING AND OPERATING WARNING! • When in “Partial Off” mode, the TCS functionality of ESC, (except for the limited slip feature described in the TCS section), has been disabled and the “ESC Off Indicator Light” will be illuminated. When in “Partial Off” mode, the engine power reduction feature of TCS is disabled, and the enhanced vehicle stability offered by the ESC system is reduced. Full Off This mode is intended for off-highway or off-road use only and should not be used on any public roadways.
STARTING AND OPERATING 405 WARNING! In the ESC “Full Off” mode, the engine torque reduction and stability features are disabled. Therefore, the enhanced vehicle stability offered by ESC is unavailable. In an emergency evasive maneuver, the ESC system will not engage to assist in maintaining stability. ⴖESC Offⴖ mode is intended for off-highway or off-road use only. NOTE: When the ESC is switched OFF, a feature of the system remains active.
406 STARTING AND OPERATING HSA will work in REVERSE and all forward gears when the activation criteria have been met. The system will not The following criteria must be met in order for HSA to activate if the vehicle is placed in NEUTRAL or PARK. activate: HSA Activation Criteria • Vehicle must be stopped. • Vehicle must be on a 6% (approximate) grade or greater hill. • Gear selection matches vehicle uphill direction (i.e.
STARTING AND OPERATING 407 Towing With HSA HSA Off HSA will provide assistance when starting on a grade If you wish to turn off the HSA system, it can be done when pulling a trailer. using the Customer Programmable Features in the Electronic Vehicle Information Center (EVIC). Refer to “Electronic Vehicle Information Center (EVIC)” in “UnderWARNING! standing Your Instrument Panel” for further information. • HSA is not a parking brake. Always apply the parking brake fully when leaving your vehicle.
408 STARTING AND OPERATING Rain Brake Support Light” comes on continuously with the engine running, a malfunction has been detected in the ESC system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corrected. Rain Brake Support may improve braking performance in wet conditions.
STARTING AND OPERATING 409 NOTE: Synchronizing ESC • Each time the ignition is cycled ON, the ESC system will be ON even if it was cycled off previously. If the power supply is interrupted (battery disconnected or discharged), the “ESC Activation/ Malfunction Indicator Light” may illuminate with the engine running. If this should occur, turn the steering wheel completely to the left and then to the right. The “ESC Activation/Malfunction Indicator Light” should go out.
410 STARTING AND OPERATING TIRE SAFETY INFORMATION NOTE: Tire Markings • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter ⬙P⬙ is absent from this tire size designation.
STARTING AND OPERATING 411 • Temporary spare tires are spares designed for tempo- • High flotation tire sizing is based on U.S. design rary emergency use only. Temporary high pressure standards and it begins with the tire diameter molded compact spare tires have the letter “T” or “S” molded into the sidewall. Example: 31x10.5 R15 LT. into the sidewall preceding the size designation. Example: T145/80D18 103M. Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S.
412 STARTING AND OPERATING EXAMPLE: R = Construction code — ⬙R⬙ means radial construction — ⬙D⬙ means diagonal or bias construction 15 = Rim diameter in inches (in) Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved und
STARTING AND OPERATING 413 EXAMPLE: Load Identification: ⴖ....blank....
414 STARTING AND OPERATING EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation — This symbol certifies that the tire is in compliance with the U.S.
STARTING AND OPERATING 415 Tire Terminology And Definitions Term B-Pillar Cold Tire Inflation Pressure Maximum Inflation Pressure Recommended Cold Tire Inflation Pressure Tire Placard Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
416 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
STARTING AND OPERATING 417 To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on the Tire and Loading Information placard. Loading The combined weight of occupants, cargo/luggage and The vehicle maximum load on the tire must not exceed trailer tongue weight (if applicable) should never exceed the load carrying capacity of the tire on your vehicle. You the weight referenced here.
418 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • The following table shows examples on how to calcu“XXX” amount equals 1,400 lbs (635 kg) and there will late total load, cargo/luggage, and towing capacities be five 150 lb (68 kg) passengers in your vehicle, the of your vehicle with varying seating configurations amount of available cargo and luggage load capacity and number and size of occupants.
STARTING AND OPERATING 419 5
420 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING 421 WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Economy Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement.
422 STARTING AND OPERATING At least once a month: inflation pressure must not exceed the maximum inflation pressure molded into the tire sidewall. • Check and adjust tire pressure with a good quality pocket-type pressure gauge. Do not make a visual judge- Check tire pressures more often if subject to a wide range ment when determining proper inflation. Tires may look of outdoor temperatures, as tire pressures vary with temperature changes. properly inflated even when they are under-inflated.
STARTING AND OPERATING 423 Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds and WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important. Increased tire pressure and reduced vehicle poorly.
424 STARTING AND OPERATING Consult an authorized tire dealer for tire repairs and Summer Or Three Season Tires – If Equipped additional information. Summer tires provide traction in both wet and dry Damaged Run Flat tires, or Run Flat tires that have conditions, and are not intended to be driven in snow or experienced a loss of pressure should be replaced imme- on ice.
STARTING AND OPERATING 425 If you need snow tires, select tires equivalent in size and type to the original equipment tires. Use snow tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle. Spare Tire Matching Original Equipped Tire And Wheel – If Equipped Your vehicle may be equipped with a spare tire and wheel equivalent in look and function to the original equipment tire and wheel found on the front or rear axle of your vehicle.
426 STARTING AND OPERATING Since this tire has limited tread life the original equip- Full Size Spare – If Equipped ment tire should be repaired (or replaced) and reinstalled The full size spare is for temporary emergency use only. on your vehicle at the first opportunity. This tire may look like the originally equipped tire on the Do not install a wheel cover or attempt to mount a front or rear axle of your vehicle, but it is not.
STARTING AND OPERATING 427 tire affects vehicle handling. Since it is not the same as your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the first opportunity. WARNING! Limited-use spares are for emergency use only. Installation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel.
428 STARTING AND OPERATING These indicators are molded into the bottom of the tread Tread wear indicators are in the original equipment tires grooves. They will appear as bands when the tread depth to help you in determining when your tires should be becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Refer to replaced. replacement tires in this section for further information.
STARTING AND OPERATING 429 WARNING! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death. “Tread Wear Indicators”. Refer to the Tire and Loading Information placard or the Vehicle Certification Label for the size designation of your tire.
430 STARTING AND OPERATING WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death.
STARTING AND OPERATING 431 CAUTION! CAUTION! (Continued) To avoid damage to your vehicle or tires, observe the following precautions: • Because of restricted chain clearance between tires and other suspension components, it is important that only chains in good condition are used. Broken chains can cause serious damage. Stop the vehicle immediately if noise occurs that could indicate chain breakage. Remove the damaged parts of the chain before further use.
432 STARTING AND OPERATING Always use the lower suggested operating speed if both the chain manufacturer and vehicle manufacturer suggest a maximum speed. This notice applies to all chain traction devices, including link and cable (radial) chains. TIRE ROTATION RECOMMENDATIONS Tires on the front and rear axles of vehicles operate at different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates.
STARTING AND OPERATING 433 The TPMS will warn the driver of a low tire pressure if The Tire Pressure Monitor System (TPMS) will warn the the tire pressure falls below the low-pressure warning driver of a low tire pressure based on the vehicle recom- limit for any reason, including low temperature effects and natural pressure loss through the tire. mended cold placard pressure. TIRE PRESSURE MONITOR SYSTEM (TPMS) The tire pressure will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C).
434 STARTING AND OPERATING For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), a temperature drop to 20°F (-7°C) will decrease the tire pressure to approximately 23 psi (158 kPa). This tire pressure is sufficiently low enough to turn ON the TPM Telltale Light.
STARTING AND OPERATING 435 • Seasonal temperature changes will affect tire pressure, and the TPMS will monitor the actual tire pressure in • The TPMS is not intended to replace normal tire care and the tire. maintenance or to provide warning of a tire failure or Premium System condition. NOTE: • The TPMS should not be used as a tire pressure gauge The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to while adjusting your tire pressure.
436 STARTING AND OPERATING • Various TPMS messages, which display in the Elec- Should this occur, you should stop as soon as possible and inflate the tires with a low pressure condition (those tronic Vehicle Information Center (EVIC), and flashing or in a different color in the EVIC graphic) to the • TPM Telltale Light vehicle’s recommended cold placard pressure inflation The matching full size spare wheel and tire assembly (if value as shown in the ⬙Inflate to XX⬙ message.
STARTING AND OPERATING 437 If the ignition switch is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the TPM Telltale Light will no longer flash, and the ⬙SERVICE TPM SYSTEM⬙ message will no longer display, and a pressure value will display in place of the dashes. A system fault can occur due to any of the following: 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors.
438 STARTING AND OPERATING Vehicles With Full Size Spare Vehicles With Compact Spare 1. The matching full size spare wheel and tire assembly 1. The compact spare tire does not have a TPM sensor. Therefore, the TPMS will not monitor the pressure in has a TPM sensor that can be monitored by the TPMS. the compact spare tire. 2. If you install the full size spare in place of a road tire that has a pressure below the low-pressure warning 2.
STARTING AND OPERATING 439 4. For each subsequent ignition switch cycle, a chime will sound, the TPM Telltale Light will flash on and off for 75 seconds and then remain on solid, and the EVIC will display a ⬙SERVICE TPM SYSTEM⬙ message for a minimum of five seconds and then display dashes (- -) in place of the pressure value. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada.
440 STARTING AND OPERATING FUEL REQUIREMENTS 6.4L Engine The 6.4L engine is designed to meet all emissions regulations and provide excellent fuel economy and performance when using high-quality premium unleaded gasoline with an octane rating of 91 or higher. Light spark knock at low engine speeds is not harmful to your engine. However, continued heavy spark knock at high speeds can cause damage and immediate service is required.
STARTING AND OPERATING 441 Gasoline/Oxygenate Blends E-85 Usage In Non-Flex Fuel Vehicles Some fuel suppliers blend unleaded gasoline with oxy- Non-FFV vehicles are compatible with gasoline containgenates such as Ethanol. Fuels blended with oxygenates ing 10% ethanol (E10). Gasoline with higher ethanol may be used in your vehicle. content may void the vehicle’s warranty. CAUTION! DO NOT use gasoline containing Methanol or gasoline containing more than 10% Ethanol.
442 STARTING AND OPERATING To fix a Non-FFV vehicle inadvertently fueled once with beyond gasoline of the same octane number without MMT. Gasoline blended with MMT reduces spark plug E-85 perform the following: life and reduces emissions system performance in some • drain the fuel tank (see your authorized dealer) vehicles. The manufacturer recommends that gasoline without MMT be used in your vehicle.
STARTING AND OPERATING 443 Fuel System Cautions CAUTION! (Continued) CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat.
444 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
STARTING AND OPERATING 445 5. Fill the vehicle with fuel – when the fuel nozzle “clicks” or shuts off the fuel tank is full. 6. Remove the fuel nozzle and close the fuel door. NOTE: A funnel is provided (located in the trunk in the spare tire area) to open the flapper door to allow for emergency refueling with a gas can. 5 Fuel Filler Door 3. There is no fuel filler cap. A flapper door inside the pipe seals the system. 4.
446 STARTING AND OPERATING CAUTION! To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. WARNING! Emergency Fuel Filler Door Release If you are unable to open the fuel filler door, use the fuel filler door emergency release. 1. Open the trunk. 2. Remove the access cover (located on the left side inner trim panel). • Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled.
STARTING AND OPERATING 447 3. Pull the release cable. Do not exceed the specified Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Vehicle Certification Label Your vehicle has a Vehicle Certification Label affixed to the drivers side “B” Pillar or the rear of the driver’s door.
448 STARTING AND OPERATING Gross Vehicle Weight Rating (GVWR) Overloading The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and the front and rear GAWR.
STARTING AND OPERATING 449 Loading TRAILER TOWING To load your vehicle properly, first figure out its empty weight, axle-by-axle and side-by-side. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items securely before driving. If weighing the loaded vehicle shows that you have exceeded either GAWR, but the total load is within the specified GVWR, you must redistribute the weight.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 HAZARD WARNING FLASHERS . . . . . . . . . . .452 䡵 JUMP-STARTING PROCEDURES. . . . . . . . . . . .464 䡵 IF YOUR ENGINE OVERHEATS . . . . . . . . . . . .452 ▫ Preparations For Jump-Start . . . . . . . . . . . . . .465 䡵 TIREFIT KIT . . . . . . . . . . . . . . . . . . . . . . . . . .453 ▫ Jump-Starting Procedure . . . . . . . . . . . . . . . .466 ▫ TIREFIT Storage . . . . . . . . . . . . . . . . . . . . . .454 䡵 FREEING A STUCK VEHICLE . . . . . . . . . . . . .
452 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located in the center In any of the following situations, you can reduce the of the instrument panel between the center air outlets. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning • On the highways — slow down. flashers.
WHAT TO DO IN EMERGENCIES 453 CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads 240°F (116°C) or greater pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range 200– 230°F (93–110°C). If the pointer remains at 240°F (116°C) or greater and you hear a chime, turn the engine off immediately and call for service.
454 WHAT TO DO IN EMERGENCIES TIREFIT Storage TIREFIT Kit Components And Operation The TIREFIT kit is located in the trunk. TIREFIT Components TIREFIT Location 1. Sealant Bottle 2. Deflation Button 3. Pressure Gauge 4.
WHAT TO DO IN EMERGENCIES 455 5. Mode Select Knob 6. Sealant Hose (Clear) 7. Air Pump Hose (Black) 8. Power Plug Using The Mode Select Knob And Hoses Selecting Sealant Mode Turn the Mode Select Knob (5) to this position to inject the TIREFIT Sealant and to inflate the tire. Use the Sealant Hose (clear hose) (6) when selecting this mode. Your TIREFIT kit is equipped with the following symbols Using The Power Button to indicate the air or sealant mode.
456 WHAT TO DO IN EMERGENCIES • For optimum performance, make sure the valve stem on the wheel is free of debris before connecting the • Replace the TIREFIT Sealant Bottle (1) and Sealant TIREFIT kit. Hose (6) prior to the expiration date (printed on the bottle label) to assure optimum operation of the sys- • You can use the TIREFIT air pump to inflate bicycle tires. The kit also comes with two needles, located in the tem.
WHAT TO DO IN EMERGENCIES 457 WARNING! WARNING! (Continued) • Do not attempt to seal a tire on the side of the vehicle closest to traffic. Pull far enough off the road to avoid the danger of being hit when using the TIREFIT kit. • Do not use TIREFIT or drive the vehicle under the following circumstances: – If the puncture in the tire tread is approximately 1/4 in. (6 mm) or larger. – If the tire has any sidewall damage. – If the tire has any damage from driving with extremely low tire pressure.
458 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • TIREFIT Sealant solution contains latex. In case of an allergic reaction or rash, consult a physician immediately. Keep TIREFIT out of reach of children. If swallowed, rinse mouth immediately with plenty of water and drink plenty of water. Do not induce vomiting! Consult a physician immediately. Sealing A Tire With TIREFIT (A) Whenever You Stop To Use TIREFIT: when injecting the sealant into the deflated tire and running the air pump.
WHAT TO DO IN EMERGENCIES 459 5. Uncoil the Power Plug (8) and insert the plug into the If the sealant (white fluid) does not flow within 0 – vehicle’s 12 Volt power outlet. 10 seconds through the Sealant Hose (6): NOTE: Do not remove foreign objects (e.g., screws or 1. Press the Power Button (4) to turn Off the TIREFIT kit. nails) from the tire. Disconnect the Sealant Hose (6) from the valve stem. Make sure the valve stem is free of debris.
460 WHAT TO DO IN EMERGENCIES NOTE: If the Mode Select Knob (5) is on Air Mode and If the tire does not inflate to at least 26 psi (1.8 Bar) the pump is operating, air will dispense from the Air pressure within 15 minutes: Pump Hose (7) only, not the Sealant Hose (6). • The tire is too badly damaged. Do not attempt to drive the vehicle further. Call for assistance. If the sealant (white fluid) does flow through the Sealant Hose (6): NOTE: If the tire becomes over-inflated, press the Defla1.
WHAT TO DO IN EMERGENCIES 461 3. Immediately disconnect the Sealant Hose (6) from the valve stem, reinstall the cap on the fitting at the end of the hose, and place the TIREFIT kit in the vehicle storage location. Quickly proceed to (D) “Drive Vehicle”. CAUTION! • The metal end fitting from Power Plug (8) may get hot after use, so it should be handled carefully.
462 WHAT TO DO IN EMERGENCIES (E) After Driving: If the tire pressure is 19 psi (1.3 Bar) or higher: Pull over to a safe location. Refer to “Whenever You Stop 1. Press the Power Button (4) to turn on TIREFIT and to Use TIREFIT” before continuing. inflate the tire to the pressure indicated on the tire and loading information label on the driver-side door 1. Turn the Mode Select Knob (5) to the Air Mode opening. position. NOTE: If the tire becomes over-inflated, press the Defla2.
WHAT TO DO IN EMERGENCIES 463 5. Replace the Sealant Bottle (1) and Sealant Hose (6) 4. Clean any remaining sealant from the TIREFIT housing. assembly at your authorized dealer as soon as possible. Refer to “(F) Sealant Bottle and Hose Replacement.” 5. Position the new Sealant Bottle (1) in the housing so that the Sealant Hose (6) aligns with the hose slot in NOTE: When having the tire serviced, advise the authothe front of the housing.
464 WHAT TO DO IN EMERGENCIES JUMP-STARTING PROCEDURES If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully. NOTE: When using a portable battery booster pack follow the manufacturer’s operating instructions and precautions.
WHAT TO DO IN EMERGENCIES 465 Remote Battery Posts Preparations For Jump-Start The battery is stored under an access cover in the trunk. WARNING! Remote battery posts are located on the right side of the engine compartment for jump-starting. • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades.
466 WHAT TO DO IN EMERGENCIES 2. Turn off the heater, radio, and all unnecessary electrical accessories. CAUTION! 3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. WARNING! 1.
WHAT TO DO IN EMERGENCIES 467 WARNING! 8. Disconnect the positive (+) jumper cable from the positive (+) post of the booster battery. Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 9. Disconnect the positive (+) end of the jumper cable from the remote positive (+) post of the discharged vehicle.
468 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved using a rocking motion. Turn the steering wheel right and left to clear the area around the front wheels. Then shift back and forth between DRIVE and REVERSE while gently pressing the accelerator. Use the least amount of accelerator pedal pressure that will maintain the rocking motion, without spinning the wheels or racing the engine.
WHAT TO DO IN EMERGENCIES 469 WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck and do not let anyone near a spinning wheel, no matter what the speed.
470 WHAT TO DO IN EMERGENCIES 6. Move the shift lever to the NEUTRAL position. 7. The vehicle may then be started in NEUTRAL. 8. Reinstall the rubber storage bin liner. TOWING A DISABLED VEHICLE NOTE: This section describes procedures for towing a disabled vehicle using a commercial wrecker service.
WHAT TO DO IN EMERGENCIES 471 Towing Condition Flat Tow Wheel Lift Wheels OFF the Ground NONE Front Flatbed Rear ALL ALL MODELS IF Transmission is operable: • Transmission in NEUTRAL • 30 mph (48 km/h) max speed • 15 mi (24 km) max distance OK BEST METHOD Proper towing or lifting equipment is required to prevent If you must use the accessories (wipers, defrosters, etc.) damage to your vehicle.
472 WHAT TO DO IN EMERGENCIES If the vehicle’s key fob is unavailable or the battery is discharged, see “Shift Lever Override” in “What To Do In Emergencies” for instructions on shifting the automatic transmission out of PARK for towing. CAUTION! • Do not use sling type equipment when towing. Damage to the fascia will occur. • When securing the vehicle to a flatbed truck, do not attach to the front or rear suspension components. Damage to your vehicle may result from improper towing.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 ENGINE COMPARTMENT — 6.4L . . . . . . . . . .475 ▫ Maintenance-Free Battery . . . . . . . . . . . . . . .483 䡵 ONBOARD DIAGNOSTIC SYSTEM — OBD II . .476 ▫ Air Conditioner Maintenance . . . . . . . . . . . . .485 䡵 EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS . . . . . . . . . . . . .477 ▫ A/C Air Filter . . . . . . . . . . . . . . . . . . . . . . .487 䡵 REPLACEMENT PARTS . . . . . . . . . . . . . . . . . .478 䡵 DEALER SERVICE . . . . . . . . . . . . . . . . . . . .
474 MAINTAINING YOUR VEHICLE ▫ Automatic Transmission . . . . . . . . . . . . . . . .501 䡵 BULB REPLACEMENT . . . . . . . . . . . . . . . . . .520 ▫ Rear Axle . . . . . . . . . . . . . . . . . . . . . . . . . . .503 ▫ Low Beam And High Beam Headlamp . . . . . .520 ▫ Appearance Care And Protection From Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . .504 ▫ Rear Backup Lamp And Turn Signal Lamps . . .521 䡵 FUSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 475 ENGINE COMPARTMENT — 6.
476 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
MAINTAINING YOUR VEHICLE 477 Your vehicle has a simple ignition key-actuated test, which you can use prior to going to the test station. To check if your vehicle’s OBD II system is ready, you must In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system. do the following: Failure to pass could prevent vehicle registration. 1. Cycle the ignition switch to the ON position, but do not crank or start the engine.
478 MAINTAINING YOUR VEHICLE 4. Approximately 15 seconds later, one of two things will vehicle as you normally would in order for your OBD II happen: system to update. A recheck with the above test routine may then indicate that the system is now ready. • The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF Regardless of whether your vehicle’s OBD II system is ready the ignition or start the engine.
MAINTAINING YOUR VEHICLE 479 DEALER SERVICE MAINTENANCE PROCEDURES Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service Manuals are available which include detailed service information for your vehicle. Refer to these Service Manuals before attempting any procedure yourself. The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle.
480 MAINTAINING YOUR VEHICLE CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
MAINTAINING YOUR VEHICLE 481 Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” for further information. CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New Vehicle Limited Warranty.
482 MAINTAINING YOUR VEHICLE Synthetic Engine Oils You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes are followed. Disposing Of Used Engine Oil And Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can present a problem to the environment.
MAINTAINING YOUR VEHICLE 483 Engine Oil Filter Selection WARNING! (Continued) This manufacturer’s engines have a full-flow type oil filter. Use a filter of this type for replacement. The quality of replacement filters varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR® engine oil filters are a high quality oil filter and are recommended. for repair or maintenance.
484 MAINTAINING YOUR VEHICLE NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals are located in the engine compartment for jump starting. Refer to “Jump-Starting Procedures” in “What To Do In Emergencies” for further information. Battery Location WARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps.
MAINTAINING YOUR VEHICLE 485 CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and are identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion.
486 MAINTAINING YOUR VEHICLE WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Warranty Information Book, located on the DVD, for further warranty information. • The air conditioning system contains refrigerant under high pressure.
MAINTAINING YOUR VEHICLE 487 A/C Air Filter The filter is located in the fresh air inlet under the hood, behind a removable panel in the cowl on the passenger side of the vehicle, next to the windshield wipers. When installing a new filter, ensure its proper orientation. 1. Remove the access door in the cowl screen by pressing the retaining clips.
488 MAINTAINING YOUR VEHICLE 2. Unsnap both ends and lift the filter access cover. A/C Air Filter Filter Access Cover 3. Remove the used filter. 5. Close the filter access cover. Refer to the “Maintenance Schedule” for the proper main4. Install the new filter with arrows pointing in the tenance intervals. direction of airflow, which is toward the rear of the vehicle (text and arrows on the filter will indicate this).
MAINTAINING YOUR VEHICLE 489 Body Lubrication Windshield Wiper Blades Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubricated periodically with a lithium based grease, such as MOPAR® Spray White Lube to assure quiet, easy operation and to protect against rust and wear.
490 MAINTAINING YOUR VEHICLE Adding Washer Fluid The windshield washer fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water. WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you.
MAINTAINING YOUR VEHICLE 491 into the passenger compartment. In addition, have the exhaust system inspected each time the vehicle is raised for lubrication or oil change. Replace as required. WARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, refer to “Safety Tips/Exhaust Gas” in “Things To Know Before Starting Your Vehicle” for further information.
492 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter damverter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage. motion.
MAINTAINING YOUR VEHICLE 493 Coolant Checks Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or cycle the ignition switch to the LOCK position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator.
494 MAINTAINING YOUR VEHICLE With the engine at normal operating temperature (but Selection Of Coolant not running), check the cooling system pressure cap for Refer to “Fluids, Lubricants, and Genuine Parts” in “Mainproper vacuum sealing by draining a small amount of taining Your Vehicle” for further information. engine coolant (antifreeze) from the radiator drain cock. If the cap is sealing properly, the engine coolant (antiCAUTION! freeze) will begin to drain from the coolant recovery bottle.
MAINTAINING YOUR VEHICLE 495 CAUTION! (Continued) • Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with the radiator engine coolant and may plug the radiator. • This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended.
496 MAINTAINING YOUR VEHICLE • Use only high purity water such as distilled or deionized water when mixing the water/engine coolant (antifreeze) solution. The use of lower quality water will reduce the amount of corrosion protection in the engine cooling system. Cooling System Pressure Cap The cap must be fully tightened to prevent loss of engine coolant (antifreeze), and to ensure that engine coolant (antifreeze) will return to the radiator from the coolant recovery tank.
MAINTAINING YOUR VEHICLE 497 WARNING! (Continued) • Do not use a pressure cap other than the one specified for your vehicle. Personal injury or engine damage may result. Disposal Of Used Engine Coolant Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community.
498 MAINTAINING YOUR VEHICLE • If frequent engine coolant (antifreeze) additions are required, the cooling system should be pressure tested NOTE: When the vehicle is stopped after a few miles/ for leaks. kilometers of operation, you may observe vapor coming from the front of the engine compartment.
MAINTAINING YOUR VEHICLE 499 Master Cylinder – Brake Fluid Level Check Brake System In order to assure brake system performance, all brake Check the fluid level in the master cylinder immediately if system components should be inspected periodically. the brake system warning light indicates system failure. Refer to the “Maintenance Schedule” for the proper Check the fluid level in the master cylinder when permaintenance intervals. forming underhood services.
500 MAINTAINING YOUR VEHICLE Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. WARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance.
MAINTAINING YOUR VEHICLE 501 WARNING! (Continued) • Do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. Use only brake fluid that has been in a tightly closed container to avoid contamination from foreign matter or moisture. Automatic Transmission Selection Of Lubricant It is important to use the proper transmission fluid to ensure optimum transmission performance and life.
502 MAINTAINING YOUR VEHICLE Special Additives Fluid Level Check The manufacturer strongly recommends against using The fluid level is preset at the factory and does not require any special additives in the transmission. adjustment under normal operating conditions. Routine fluid level checks are not required, therefore the transmisAutomatic Transmission Fluid (ATF) is an engineered sion has no dipstick.
MAINTAINING YOUR VEHICLE 503 Fluid And Filter Changes Fluid Level Check Refer to the “Maintenance Schedule” for the proper Check the fluid level by removing the fill plug on the axle. maintenance intervals. The fluid level should be at the bottom of the fill hole. Add fluid, if necessary, to maintain the proper level. Refer to In addition, change the fluid and filter if the transmission “Fluids, Lubricants, and Genuine Parts” in “Maintaining is disassembled for any reason.
504 MAINTAINING YOUR VEHICLE Appearance Care And Protection From Corrosion What Causes Corrosion? Protection Of Body And Paint From Corrosion Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. Vehicle body care requirements vary according to geographic locations and usage.
MAINTAINING YOUR VEHICLE 505 • If insects, tar, or other similar deposits have accumu- Special Care lated on your vehicle, use MOPAR® Super Kleen Bug • If you drive on salted or dusty roads or if you drive and Tar Remover to remove. near the ocean, hose off the undercarriage at least once a month. • Use a high quality cleaner wax, such as MOPAR® Cleaner Wax to remove road film, stains and to protect • It is important that the drain holes in the lower edges your paint finish.
506 MAINTAINING YOUR VEHICLE • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • Use MOPAR® Touch Up Paint on scratches as soon as possible. Your authorized dealer has touch up paint to match the color of your vehicle.
MAINTAINING YOUR VEHICLE 507 Stain Repel Fabric Cleaning Procedure – If Equipped Interior Care Use MOPAR® Total Clean to clean fabric upholstery and Stain Repel seats may be cleaned in the following man- carpeting. ner: Use MOPAR® Total Clean to clean vinyl upholstery. • Remove as much of the stain as possible by blotting MOPAR® Total Clean is specifically recommended for with a clean, dry towel. leather upholstery. • Blot any remaining stain with a clean, damp towel.
508 MAINTAINING YOUR VEHICLE WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses. Glass Surfaces All glass surfaces should be cleaned on a regular basis with MOPAR® Glass Cleaner, or any commercial householdCleaning Headlights type glass cleaner. Never use an abrasive type cleaner.
MAINTAINING YOUR VEHICLE 509 If the belts need cleaning, use MOPAR® Total Clean, a mild soap solution, or lukewarm water. Do not remove The lenses in front of the instruments in this vehicle are the belts from the vehicle to wash them. Dry with a soft molded in clear plastic. When cleaning the lenses, care cloth. must be taken to avoid scratching the plastic. Replace the belts if they appear frayed or worn or if the 1. Clean with a wet soft rag. A mild soap solution may be buckles do not work properly.
510 MAINTAINING YOUR VEHICLE FUSES CAUTION! Front Power Distribution Center The Front Power Distribution Center is located in the engine compartment. This module contains fuses and relays. Front Power Distribution Center • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure.
MAINTAINING YOUR VEHICLE 511 Cavity 1 2 3 4 5 6 7 8 Cartridge Fuse — 40 Amp Green 50 Amp Red 30 Amp Pink 40 Amp Green 25 Amp Natural — — MiniFuse Description Cavity — — Fuse – Spare Radiator Fan #1 9 Cartridge Fuse — — Power Steering #1 10 — — Starter 11 — — Anti-Lock Brakes 12 — — Anti-Lock Brakes — — Fuse – Spare Fuse – Spare 13 14 15 — — — 16 — MiniFuse Description 20 Amp Yellow All-Wheel Drive Module – If Equipped Security 10 Amp Red 20 Amp Yellow 10 Amp Red — — 25 Amp
512 MAINTAINING YOUR VEHICLE Cavity 22 23 24 28 Cartridge Fuse 50 Amp Red 50 Amp Red 30 Amp Pink 30 Amp Pink — — — — 29 — 18 19 20 21 MiniFuse Description Cavity — Radiator Fan #2 30 31 Cartridge Fuse — — — Power Steering #2 — Wiper Motor 32 33 34 — — — — Headlamp Washers 35 — — — — 25 Amp Natural 15 Amp Blue Fuse – Spare Fuse – Spare Fuse – Spare Fuel Pump 36 — 37 — 38 — Transmission Shifter MiniFuse Description — 25 Amp Natural — — 25 Amp Natural 20 Amp Yellow 10 Amp Red
MAINTAINING YOUR VEHICLE 513 Cavity 39 Cartridge Fuse — MiniFuse Description 10 Amp Red Power Steering Module/AC Clutch Relay AWD Module/ Front Axle Disconnect Fuse – Spare Fuse – Spare Vacuum Pump 48 — 10 Amp Red 49 50 51 — — — 52 53 — — — — 20 Amp Yellow — — Rear Power Distribution Center There is also a power distribution center located in the trunk under the spare tire access panel. This center contains fuses and relays.
514 MAINTAINING YOUR VEHICLE CAUTION! • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
MAINTAINING YOUR VEHICLE 515 Cavity 10 11 12 15 Cartridge Fuse 30 Amp Pink 30 Amp Pink — 16 17 18 40 Amp Green — — — 19 20 — — MiniFuse Description — Driver Door — Passenger Door 20 Amp Yellow — — — 20 Amp Yellow — — Cigar Lighters, Instrument Panel & Power Outlet Console Rear HVAC Blower Fuse — Spare Fuse — Spare Active Dampening Module Fuse — Spare Fuse — Spare Cavity 21 22 23 Cartridge Fuse — — — 24 — 25 — 26 27 — — 31 — 32 — MiniFuse Description — — 10 Amp Red 15 Amp Blue 1
516 MAINTAINING YOUR VEHICLE Cavity 33 Cartridge Fuse — 34 — 35 — 36 37 — — 38 — 40 41 42 — — 30 Amp Pink MiniFuse 15 Amp Blue 10 Amp Red 10 Amp Red — 15 Amp Blue 20 Amp Yellow — — — Description Ignition Switch/ Wireless Module Steering Column Module/Clock Battery Sensor 43 Cartridge Fuse — 44 — 45 — Fuse — Spare Radio 46 — 47 — 48 — 49 50 — — Power Outlet Inside Arm Rest Fuse — Spare Fuse — Spare Rear Defrost Cavity MiniFuse 25 Amp Natural 10 Amp Red 15 Amp Blue 10 Amp Red
MAINTAINING YOUR VEHICLE 517 Cavity 51 Cartridge Fuse — 52 — 53 — 54 55 56 57 58 — — — — — 59 60 — — MiniFuse 20 Amp Yellow 10 Amp Red 10 Amp Red — — — — 10 Amp Red — — Description Front Heated Seats Heated Cupholders/ Rear Heated Seat Switches HVAC Module/In Car Temperature Sensor Fuse — Spare Fuse — Spare Fuse — Spare Fuse — Spare Airbag Module Fuse — Spare Fuse — Spare Cavity 61 62 63 64 Cartridge Fuse — — — — 65 — 66 67 — — 68 — 69 70 — — MiniFuse — — — 25 Amp Natural 10 Amp Red
518 MAINTAINING YOUR VEHICLE VEHICLE STORAGE If you are leaving your vehicle dormant for more than 21 days, you may want to take these steps to protect your battery. • Disconnect the negative cable from the battery. • Anytime you store your vehicle, or keep it out of service (i.e., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air and high blower setting.
MAINTAINING YOUR VEHICLE 519 Exterior Bulbs Low Beam/High Beam (Bi-Halogen Headlamp) Low Beam/High Beam (Bi-Xenon Headlamp) Front Turn Signal Lamp Front Park Lamp Daytime Running Lamp Front Fog Lamp – If Equipped Bulb Number HIR2LL D3S (Serviced at Authorized Dealer) PSY24WSV LED (Serviced at Authorized Dealer) LED (Serviced at Authorized Dealer) H11 Front Sidemarker Lamp Rear Tail/Stop/ Turn Lamp Rear Sidemarker Lamp Backup Lamp Center High Mount Stop Lamp (CHMSL) License Rear Fog Lamp – If Equipped Bu
520 MAINTAINING YOUR VEHICLE BULB REPLACEMENT Low Beam And High Beam Headlamp High Intensity Discharge Headlamps (HID) — If Equipped The headlamps are a type of high voltage discharge tube. High voltage can remain in the circuit even with the headlamp switch off and the key removed. Because of this, you should not attempt to service a headlamp bulb yourself. If a headlamp bulb fails, take your vehicle to an authorized dealer for service.
MAINTAINING YOUR VEHICLE 521 CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Rear Backup Lamp And Turn Signal Lamps 1. Open the trunk. 5. Pull the tail lamp assembly away from the vehicle enough to access the electrical connector. 6. Push the electrical connector locking tab to the side. 7. Disconnect the electrical connector. 8.
522 MAINTAINING YOUR VEHICLE 12. Reinstall the tail lamp assembly, fasteners, electrical connector, and trunk trim. 13. Close the trunk. License Lamp 1. Remove the screws securing the lamp to the rear fascia. 2. Remove the bulb and socket assembly. 3. Disconnect the bulb from the socket assembly and install the replacement bulb. 1 — License Lamp Bulb 2 — Socket 4. Reinstall the bulb and socket assembly. 5. Reattach the lamp to the rear fascia, and then install the screws.
MAINTAINING YOUR VEHICLE 523 FLUID CAPACITIES Fuel (Approximate) Engine Oil With Filter 6.4 Liter Engine (SAE 0W-40, Synthetic API Certified) Cooling System * 6.4 Liter Engine (MOPAR® Antifreeze/Engine Coolant 10 Year/ 150,000 Mile Formula or equivalent) * Includes heater and coolant recovery bottle filled to MAX level. U.S. 19 Gallons Metric 72 Liters 7 Quarts 6.6 Liters 15.2 Quarts 14.
524 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Engine Oil Filter Spark Plugs Fuel Selection Fluid, Lubricant, or Genuine Part We recommend you use MOPAR® Antifreeze/Coolant 10 Year/ 150,000 Mile Formula OAT (Organic Additive Technology). For best performance and maximum protection under all types of operating conditions, We recommend you use full synthetic engine oils that meet the American Petroleum Institute (API) categories of SM or SM/CF.
MAINTAINING YOUR VEHICLE 525 Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir Rear Axle Fluid, Lubricant, or Genuine Part We recommend you ONLY use MOPAR® ATF+4® Automatic Transmission Fluid. Failure to use ATF+4 fluid may affect the function or performance of your transmission. We recommend you use MOPAR® DOT 3 brake fluid. If DOT 3 brake fluid is not available, then DOT 4 is acceptable.
M A I N T E N A ▫ Required Maintenance Intervals . . . . . . . . . . .530 N C E MAINTENANCE SCHEDULES CONTENTS 䡵 MAINTENANCE SCHEDULE . . . . . . . . . . . . .
M A I N T E N A N C E 528 MAINTENANCE SCHEDULES On Electronic Vehicle Information Center (EVIC) The Scheduled Maintenance services listed in this equipped vehicles, “Oil Change Required” will be dismanual must be done at the times or mileages specified played in the EVIC and a single chime will sound, indicating that an oil change is necessary. to protect your vehicle warranty and ensure the best vehicle performance and reliability.
MAINTENANCE SCHEDULES 529 M NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10,000 km) or six months, whichever comes first.
M A I N T E N A N C E 530 MAINTENANCE SCHEDULES Once A Month • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery, and clean and tighten the terminals as required. CAUTION! • Check the fluid levels of the coolant reservoir, brake master cylinder, and power steering, and add as S needed. C H E • Check all lights and other electrical items for correct operation.
MAINTENANCE SCHEDULES 531 M 6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary.
M 532 MAINTENANCE SCHEDULES A I 18,000 Miles (30,000 km) or N T 18 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C ❏ Inspect the rear axle fluid. E S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
MAINTENANCE SCHEDULES 533 M 30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule 36,000 Miles (60,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes. Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
M 534 MAINTENANCE SCHEDULES A I 42,000 Miles (70,000 km) or N T 42 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
MAINTENANCE SCHEDULES 535 M 54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule 60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Inspect the rear axle fluid. Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate tires. Replace the engine air cleaner filter. Replace the air conditioning filter.
M 536 MAINTENANCE SCHEDULES A I 66,000 Miles (110,000 km) or N T 66 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
MAINTENANCE SCHEDULES 537 M 78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary.
M 538 MAINTENANCE SCHEDULES A I 90,000 Miles (150,000 km) or N T 90 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C ❏ Replace the engine air cleaner filter. E S C H E D U L E S 8 ❏ Inspect and replace the PCV Valve if necessary. ❏ Inspect the rear axle fluid. ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes.
MAINTENANCE SCHEDULES 539 M 102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
M 540 MAINTENANCE SCHEDULES A I 114,000 Miles (190,000 km) or N T 114 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate tires. Replace the engine air cleaner filter.
MAINTENANCE SCHEDULES 541 M 126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Inspect the rear axle fluid. Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
M 542 MAINTENANCE SCHEDULES A I 138,000 Miles (230,000 km) or N T 138 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
MAINTENANCE SCHEDULES 543 M 150,000 Miles (250,000 km) or 150 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes. ❏ Flush and replace the engine coolant at 150,000 miles (250 000 km) or 120 months whichever comes first.
M 544 MAINTENANCE SCHEDULES A I WARNING! N T E • You can be badly injured working on or around a motor vehicle. Do only service work for which you N A have the knowledge and the right equipment. If N you have any doubt about your ability to perform a C service job, take your vehicle to a competent meE S C H E D U L E S 8 chanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . .547 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . .549 ▫ Prepare For The Appointment. . . . . . . . . . . . .547 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . .550 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . .547 䡵 WARRANTY INFORMATION . . . . . . . . . . . . .
546 IF YOU NEED CONSUMER ASSISTANCE 䡵 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES . . . . . . . . .553 ▫ Treadwear. . . . . . . . . . . . . . . . . . . . . . . . . . .554 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . .554 ▫ Temperature Grades. . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 547 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment Be Reasonable With Requests If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with the service advisor and list the items in order of priority. At many authorized dealer, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it is advisable to make these arrangements when you call for an appointment.
548 IF YOU NEED CONSUMER ASSISTANCE Warranty service must be done by an authorized dealer. We strongly recommend that you take the vehicle to an authorized dealer. They know your vehicle the best, and are most concerned that you get prompt and high quality service. The manufacturer’s authorized dealer have the facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner.
IF YOU NEED CONSUMER ASSISTANCE 549 Chrysler Canada Inc. Customer Center P.O. Box 1621 Windsor, Ontario N9A 4H6 Phone: (800) 465–2001 English / (800) 387–9983 French In Mexico contact: Av. Prolongacion Paseo de la Reforma, 1240 Sante Fe C.P. 05109 Mexico, D. F.
550 IF YOU NEED CONSUMER ASSISTANCE Service Contract You may have purchased a service contract for a vehicle to help protect you from the high cost of unexpected repairs after the manufacturer’s New Vehicle Limited Warranty expires. The manufacturer stands behind only the manufacturer’s service contracts. If you purchased a manufacturer’s service contract, you will receive Plan Provisions and an Owner Identification Card in the mail within three weeks of the vehicle delivery date.
IF YOU NEED CONSUMER ASSISTANCE 551 WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm.
552 IF YOU NEED CONSUMER ASSISTANCE campaign. However, NHTSA cannot become involved in PUBLICATION ORDER FORMS individual problems between you, your authorized To order the following manuals, you may use either the dealer, and the manufacturer. website or the phone numbers listed below. Visa, MasTo contact NHTSA, you may either call the Auto Safety tercard, American Express, and Discover orders are acHotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), cepted.
IF YOU NEED CONSUMER ASSISTANCE 553 Diagnostic Procedure Manuals Call toll free at: Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations. These practical manuals make it easy for students and technicians to find and fix problems on computer-controlled vehicle systems and features.
554 IF YOU NEED CONSUMER ASSISTANCE Treadwear Traction Grades The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100.
IF YOU NEED CONSUMER ASSISTANCE 555 Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
558 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . . . . .395 ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . . .398 Adaptive Cruise Control (ACC) (Cruise Control) . . .223 Adding Engine Coolant (Antifreeze) . . . . . . . . . . . .495 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .444 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . .490 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . .442 Adjustable Pedals . . . . . . . . . .
INDEX 559 Brake Control System, Electronic . . . . . . . . . . . . . .400 Brake Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . .525 Brake, Parking . . . . . . . . . . . . . . . . . . . . . . . . . . .395 Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . . .499 Anti-Lock (ABS) . . . . . . . . . . . . . . . . . . . . . . . .398 Fluid Check . . . . . . . . . . . . . . . . . . . . . . . . . . .499 Master Cylinder . . . . . . . . . . . . . . . . . . . . . . . .499 Parking . . . . .
560 INDEX Power Steering . . . . . . . . . . . . . . . . . . . . . . . . .394 Radiator (Coolant Pressure) . . . . . . . . . . . . . . . .496 Carbon Monoxide Warning . . . . . . . . . . . . . . . . . . .95 Cargo Area Features . . . . . . . . . . . . . . . . . . . . . . .292 Cargo Compartment . . . . . . . . . . . . . . . . . . . . . . .292 Cargo (Vehicle Loading) . . . . . . . . . . . . . . . . . . . .447 Car Washes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .504 Cellular Phone . . . . . . . .
INDEX 561 Delay (Intermittent) Wipers . . . . . . . . . . . . . . . . . .210 Diagnostic System, Onboard . . . . . . . . . . . . . . . . .476 Dimmer Switch, Headlight. . . . . . . . . . . . . . . . . . .204 Dipsticks Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . . . .480 Power Steering . . . . . . . . . . . . . . . . . . . . . . . . .394 Disposal Antifreeze (Engine Coolant) . . . . . . . . . . . . . . . .497 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
562 INDEX Break-In Recommendations . . . . . . . . . . . . . . . . .94 Electronic Brake Control System . . . . . . . . . . . . . . .400 Checking Oil Level . . . . . . . . . . . . . . . . . . . . . .480 Anti-Lock Brake System . . . . . . . . . . . . . . . . . .400 Compartment . . . . . . . . . . . . . . . . . . . . . . . . . .475 Brake Assist System . . . . . . . . . . . . . . . . . . . . .401 Coolant (Antifreeze) . . . . . . . . . . . . . . . . . . . . .493 Traction Control System . . . . . . . . . . . . .
INDEX 563 Enhanced Accident Response Feature . . . . . . . . . . . .68 Entry System, Illuminated . . . . . . . . . . . . . . . . . . . .21 Ethanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .441 Event Data Recorder . . . . . . . . . . . . . . . . . . . . . . . .71 Exhaust Gas Caution. . . . . . . . . . . . . . . . . . . . . . . .95 Exhaust System . . . . . . . . . . . . . . . . . . . . . . . . . . .95 Exterior Folding Mirrors . . . . . . . . . . . . . . . . . . . .109 Exterior Lighting.
564 INDEX Fuel . . . . . . . . . . . . . . . Additives . . . . . . . . . Clean Air . . . . . . . . . Conserving . . . . . . . . Ethanol . . . . . . . . . . Filler Door (Gas Cap) Gasoline . . . . . . . . . . Gauge . . . . . . . . . . . Light . . . . . . . . . . . . Materials Added . . . . Methanol . . . . . . . . . Octane Rating . . . . . . Requirements . . . . . . Saver Mode . . . . . . . Specifications . . . . . . Tank Capacity . . . . . . Fuel Optimizer . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 565 Gross Vehicle Weight Rating. . . . . . . . . . . . . . . . . .448 Head Restraints . . . . . . . . . . . . . . . . . . . . . . . . . .187 GVWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .448 Head Rests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187 Heated Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Heated Seats. . . . . . . . . . . . . . . . . . . . . . . . . . . . .182 Hazard Heater, Engine Block . . . . . . . . . . . . . . . . . . . . . .
566 INDEX Interior Appearance Care . . . . . . . . . . . . . . . . . . . .507 Lap/Shoulder Belts. . . . . . . . . . . . . . . . . . . . . . . . .48 Interior Lights . . . . . . . . . . . . . . . . . . . . . . . . . . .207 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196 Intermittent Wipers (Delay Wipers). . . . . . . . . . . . .210 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 567 Parade Mode (Daytime Brightness) . . . . . . . . . . .209 Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204 Fog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202 Reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205 Hazard Warning Flasher . . . . . . . . . . . . . . . . . .452 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . .310 Headlights . . . . . . . .
568 INDEX Auto Unlock . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 Child Protection . . . . . . . . . . . . . . . . . . . . . . . . .33 Electric Powered . . . . . . . . . . . . . . . . . . . . . . . .111 Electric Remote . . . . . . . . . . . . . . . . . . . . . . . . .111 Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Exterior Folding . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 569 Octane Rating, Gasoline (Fuel) . Odometer. . . . . . . . . . . . . . . . Oil Change Indicator . . . . . . . . Oil Change Indicator, Reset . . . Oil, Engine . . . . . . . . . . . . . . . Capacity . . . . . . . . . . . . . . Change Interval . . . . . . . . . Checking . . . . . . . . . . . . . . Dipstick . . . . . . . . . . . . . . . Disposal . . . . . . . . . . . . . . . Filter . . . . . . . . . . . . . . . . . Filter Disposal . . . . . . . . . . Materials Added to . . . . . . . Recommendation . .
570 INDEX Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 Outlet (Auxiliary Electrical Outlet) . . . . . . . . . . .279 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179 Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .393 Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271 Tilt/Telescoping Steering Column . . . . . . . . . . . .215 Windows . . . . . . . .
INDEX 571 Remote Trunk Release. . . . . . . . . . . . . . . . . . . . . . .42 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . . . . .518 Replacement Keys . . . . . . . . . . . . . . . . . . . . . . . . .17 Replacement Parts. . . . . . . . . . . . . . . . . . . . . . . . .478 Replacement Tires . . . . . . . . . . . . . . . . . . . . . . . . .429 Reporting Safety Defects . . . . . . . . . . . . . . . . . . . .551 Resetting Oil Change Indicator . . . . . . . . . . . . . . . .302 Restraint, Head. . .
572 INDEX Height Adjustment . . . . . . . . . . . . . . . . . . . . . .179 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179 Rear Folding . . . . . . . . . . . . . . . . . . . . . . . . . .190 Seatback Release . . . . . . . . . . . . . . . . . . . . . . . .190 Tilting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179 Security Alarm (Theft Alarm). . . . . . . . . . . . . . . . . .
INDEX 573 Engine Fails to Start . . . . . . . . . . . . . . . . . . . . .373 Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Starting and Operating . . . . . . . . . . . . . . . . . . . . .369 Starting Procedures . . . . . . . . . . . . . . . . . . . . . . . .369 Steering Column Controls . . . . . . . . . . . . . . . . . . . . . . .203 Column Lock . . . . . . . . . . . . . . . . . . . . . . . . . .214 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
574 INDEX Compact Spare . . . . . . . . . . . . . General Information . . . . . . . . . High Speed . . . . . . . . . . . . . . . Inflation Pressures . . . . . . . . . . . Life of Tires . . . . . . . . . . . . . . . Load Capacity . . . . . . . . . . . . . Pressure Monitor System (TPMS) Pressure Warning Light . . . . . . . Quality Grading . . . . . . . . . . . . Radial . . . . . . . . . . . . . . . . . . . Replacement . . . . . . . . . . . . . . . Rotation . . . . . . . . . . . . . . . . . . Safety . . . . .
INDEX 575 Trunk Release Remote Control . . . . . . . . . . . . . . . . .42 Warning Flasher, Hazard . . . . . . . . . . . . . . . . . . . .452 Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204 Warning Lights (Instrument Cluster Description) . . .301 Warnings and Cautions. . . . . . . . . . . . . . . . . . . . . . .6 UCI Connector . . . . . . . . . . . . . . . . . . . . . . . . . . .349 Warranty Information . . . . . . . . . . . . . . . . . . . . . .551 Uniform Tire Quality Grades . .
576 INDEX Windshield Washers . . . . Fluid . . . . . . . . . . . . . Windshield Wiper Blades . Windshield Wipers . . . . . Wiper Blade Replacement Wipers, Intermittent . . . . Wipers, Rain Sensitive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209 .490 .489 .209 .489 .210 .
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
Chrysler Group LLC Chrysler Group LLC 13C482-126-AD 13ZD-126-AA OWNER’S MANUAL Printed in U.S.A. Printed in U.S.A. 3rd Edition First Edition 1135554cv1 Viper 13ZD-126-AA Chrysler 1" gutter 07/11/2012 15:40:46 2013 Viper 2013 OWNER’S MANUAL Chrysler Group LLC 13ZD-126-AA First Edition Printed in U.S.A.
