2013 OWNER’S MANUAL 200
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. This manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS 䡵 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . .4 䡵 VEHICLE IDENTIFICATION NUMBER . . . . . . . .6 䡵 HOW TO USE THIS MANUAL . . . . . . . . . . . . . .4 䡵 VEHICLE MODIFICATIONS/ALTERATIONS . . . .7 䡵 WARNINGS AND CAUTIONS . . . . . . . . . . . . . .
4 INTRODUCTION When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained techCongratulations on selecting your new Chrysler Group nicians and genuine MOPAR® parts, and cares about LLC vehicle. Be assured that it represents precision your satisfaction. workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A WORD ABOUT YOUR KEYS . . . . . . . . . . . . .12 ▫ Rearming The System . . . . . . . . . . . . . . . . . . .19 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . .12 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . . .19 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . .15 ▫ To Disarm The System . . . . . . . . . . . . . . . . . . .20 ▫ Locking the Doors with the Key . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Programming Additional Transmitters. . . . . . . .27 ▫ Transmitter Battery Replacement . . . . . . . . . . .27 ▫ General Information . . . . . . . . . . . . . . . . . . . .28 䡵 REMOTE START SYSTEM — IF EQUIPPED . . . .28 ▫ How To Use Remote Start . . . . . . . . . . . . . . . .28 䡵 DOOR LOCKS . . . . . . . . . . . . . . . . . . . . . . . . .32 ▫ Manual Door Locks . . . . . . . . . . . . . . . . . . . . .32 ▫ Power Door Locks . . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Automatic Locking Retractor Mode (ALR) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .53 ▫ Energy Management Feature . . . . . . . . . . . . . .54 ▫ Seat Belt Pretensioners . . . . . . . . . . . . . . . . . .55 ▫ Air Bag Deployment Sensors And Controls . . . .67 ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . .74 ▫ Child Restraints . . . . . . . . . . . . . . . . . . . . . . .76 ▫ Transporting Pets . . . . . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The authorized dealer that sold you your vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your authorized dealer. Ask your authorized dealer for these numbers and keep them in a safe place. You can insert the double-sided keys into the locks with either side up. Vehicle Key Ignition Key Removal Automatic Transaxle Place the shift lever in PARK.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: • If you try to remove the key before you place the shift lever in PARK, the key may become trapped temporarily in the ignition switch lock cylinder. If this occurs, rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition switch lock cylinder to warn you that this safety feature is inoperable.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), the power window switches, radio, hands–free system (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time for this feature is programmable.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Key-In-Ignition Reminder SENTRY KEY® Opening the driver’s door when the key is in the ignition The Sentry Key® Immobilizer System prevents unausounds a signal to remind you to remove the key. thorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation NOTE: is automatic, regardless of whether the vehicle is locked • The Key-In-Ignition reminder only sounds when the or unlocked.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE During normal operation, after turning on the ignition CAUTION! switch, the Vehicle Security Light will turn on for three seconds for a bulb check. If the light remains on after the The Sentry Key® Immobilizer system is not compatbulb check, it indicates that there is a problem with the ible with some after-market remote starting systems. electronics.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 CAUTION! Always remove the Sentry Key® from the vehicle and lock all doors when leaving the vehicle unattended. Customer Key Programming You can program new keys to the system if you have two valid Sentry Keys® by performing the following procedure: 1. Cut the additional Sentry Key® Transponder blank(s) At the time of purchase, the original owner is provided to match the ignition switch lock cylinder key code.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Insert a blank Sentry Key® into the ignition switch. Turn the ignition switch to the ON/RUN position within 60 seconds. After 10 seconds, a single chime will sound. In addition, the Vehicle Security Light will stop flashing. To indicate that programming is complete, the indicator light will turn on again for three seconds and then turn off.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 VEHICLE SECURITY ALARM — IF EQUIPPED Rearming The System The Vehicle Security Alarm monitors the doors and trunk for unauthorized entry and ignition switch for unauthorized operation. While the Vehicle Security Alarm is armed, interior switches for door locks and decklid release are disabled.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. The Vehicle Security Light in the instrument cluster will flash for 16 seconds. This shows that the Vehicle Security Alarm is arming. During this period, if a door is opened, the ignition switch is turned to ON/RUN, or the power door locks are unlocked in any manner, the Vehicle Security Alarm will automatically disarm.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 of the previously described arming sequences has occurred, the Vehicle Security Alarm will arm regardless of whether you are in the vehicle or not. If you remain in the vehicle and open a door, the alarm will sound. If this occurs, disarm the Vehicle Security Alarm. If the Vehicle Security Alarm is armed and the battery becomes disconnected the Vehicle Security Alarm will remain armed when the battery is reconnected.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: NOTE: • The front courtesy overhead console and door cour- • The line of transmission must not be blocked with metal objects. tesy lights will remain on if the dimmer control is in the ⬙Dome ON⬙ position (extreme top position). • Inserting the key into the ignition switch disables all buttons on the RKE transmitter. • The Illuminated Entry system will not operate if the dimmer control is in the “Dome defeat” position (extreme bottom position).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, perform the following procedure: Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door, or twice to 1. Press and hold the LOCK button on a programmed unlock all doors. The turn signal lights will flash to RKE transmitter for at least four seconds, but not acknowledge the unlock signal. The Illuminated Entry longer than 10 seconds.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If there is no key in the ignition switch, pressing • For vehicles not equipped with the EVIC, perform the the LOCK button on the RKE transmitter while you are following procedure: inside the vehicle will activate the Vehicle Security Alarm 1. Press and hold the UNLOCK button on a programmed system. Opening a door with the system activated will RKE transmitter for at least 4 seconds, but not longer cause the alarm to sound.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 NOTE: If there is no key in the ignition switch, pressing the LOCK button on the RKE transmitter while you are in the vehicle will activate the Vehicle Security Alarm system. Opening a door with the system activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security Alarm system. To Lock The Doors Press and release the LOCK button on the RKE transmitter to lock all doors.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the Opening a door with the alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate following steps: the Vehicle Security Alarm. 1. Press the LOCK button on a programmed RKE transmitter for at least 4 seconds, but not longer than To Unlatch The Trunk 10 seconds. Then, press the PANIC button while still Press the TRUNK button on the RKE transmitter two holding the LOCK button.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 NOTE: You may need to be close to the vehicle when using the RKE transmitter to turn off the Panic Alarm due to the Radio Frequency (RF) noises emitted by the system. 2 Programming Additional Transmitters Refer to Sentry Key® “Customer Key Programming.” If you do not have a programmed RKE transmitter, contact your authorized dealer for details. Transmitter Battery Replacement The recommended replacement battery is CR2032.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Closeness to a radio transmitter such as a radio station tower, airport transmitter, military base, and some This device complies with part 15 of FCC rules and with mobile or CB radios. RS-210 of Industry Canada. Operation is subject to the following conditions: REMOTE START SYSTEM — IF EQUIPPED General Information 1. This device may not cause harmful interference.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • Hood closed • RKE PANIC button not pressed • Trunk closed • System not disabled from previous remote start event • Hazard switch off • Vehicle theft alarm not active • Brake switch inactive (brake pedal not pressed) • Ignition key removed from ignition switch • Battery at an acceptable charge level WARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monoxide (CO) which is odorless and colorless.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) — If Equipped To Enter Remote Start Mode Press and release the REMOTE START button on the RKE transmitter twice within five seconds. The following messages will display in the EVIC if the The vehicle doors will lock, the parking lights vehicle fails to remote start or exits remote start premawill flash and the horn will chirp twice (if turely: programmed).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 Remote start will also cancel if any of the following occur: NOTE: To avoid unintentional shut downs, the system will disable the one-time press of the Remote Start button • The engine stalls or RPM exceeds 2500 for two seconds after receiving a valid remote start request.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS WARNING! Manual Door Locks To lock each door, push the door lock knob on each door trim panel downward. To unlock each door, pull the inside door handle. • For personal security and safety in the event of an collision, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the Key Fob from the ignition.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 WARNING! (Continued) • Do not leave the Key Fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle. Power Door Locks A door lock switch is located on the driver and passenger door panel. Press this switch to lock or unlock the doors. CAUTION! An unlocked vehicle is an invitation to thieves.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Door Locks — If Equipped 4. The driver door is opened. The auto door lock feature default condition is enabled. When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). The auto door lock feature can be enabled or disabled by your authorized dealer. Please see your authorized dealer for service. 5. The doors were not previously unlocked. Auto Unlock On Exit 6. The vehicle speed is 0 mph (0 km/h).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • For vehicles not equipped with the EVIC, perform the Child-Protection Door Lock System — following procedure: Rear Doors To provide a safer environment for children riding in the rear seat, the rear doors of your vehicle have a Child2. Cycle the ignition switch between LOCK and ON/ Protection Door Lock system. RUN and then back to LOCK four times, ending up in the LOCK position. 1. Close all doors and place the key in the ignition. 3.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Child-Protection Door Locks are located inside the rear edge of the door. Insert the tip of the ignition key or similar flat-bladed object into the lock and rotate approximately one-quarter turn to the lock or unlock position (as indicated by the stamped icons). WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 There is a single window control on the front and rear passenger’s door trim panel, which operates the front Power Window Switches and rear passenger door windows. The window controls The control on the driver’s door has up/down switches will operate when the ignition switch is turned to the that give you fingertip control of all four power windows. ON/RUN or ACC position, and when the accessory delay feature is active.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Window Down — If Equipped The front window controls on the driver and passenger door trim panels have an Auto-Down feature. These switches are labeled AUTO to indicate this capability. Push the window switch past the first detent, release, and the window will go down automatically. For vehicles equipped with EVIC, the power window switches will remain active for up to 10 minutes after the ignition switch is turned off.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 To close the window part way, lift the window switch to the first detent and release it when you want the window to stop. NOTE: WARNING! When the window is almost closed, there is no anti-pinch protection. To avoid personal injury, be sure to clear your arms, hands, fingers and all objects from the window path before closing.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Window Lockout Switch Wind Buffeting The window lockout switch on the driver’s door allows you to disable the window control on the other doors. To disable the window controls on the other doors, press the window LOCK button. To enable the window controls, press the window control button again. Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 With the ignition switch in the ON/RUN position, the word “dECK ” will display in place of the odometer Use the Remote Keyless Entry (RKE) display indicating that the trunk is open. The odometer transmitter to open the trunk from display will reappear once the trunk is closed or if the outside the vehicle. From inside the trip button is depressed.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE TRUNK SAFETY WARNING WARNING! Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended. Once in the trunk, young children may not be able to escape, even if they entered through the rear seat. If trapped in the trunk, children can die from suffocation or heat stroke.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 OCCUPANT RESTRAINTS • Knee bolsters/blockers for front seat occupants Some of the most important safety features in your • Front seat belts incorporate pretensioners that may vehicle are the restraint systems: enhance occupant protection by managing occupant energy during an impact event • Three-point lap and shoulder belts for all seating positions • All seat belt systems (except the driver’s) include Automatic Locking Retractors (ALRs), which lock the • Ad
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and Tether for CHildren (LATCH) feature also can be used to hold infant and child restraint systems. For more information on LATCH, refer to Lower Anchors and Tether for CHildren (LATCH). NOTE: The Advanced Front Air Bags have a multistage inflator design.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 You should read the instructions provided with your child restraint to make sure that you are using it properly. 2. All occupants should always wear their lap and shoulder belts properly. 3. The driver and front passenger seats should be moved back as far as practical to allow the Advanced Front Air Bags room to inflate. 4. Do not lean against the door or window.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Supplemental Side Air Bag Inflatable Curtain (SABIC) and Seat-Mounted Side Air Bags (SAB) also need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat. • In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 The belt webbing retractor will lock only during very sudden stops or collisions. This feature allows the shoulder part of the belt to move freely with you under normal conditions. However, in a collision the belt will lock and reduce your risk of striking the inside of the vehicle or being thrown out. WARNING! • Be sure everyone in your vehicle is in a seat and using a seat belt properly.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 1. Enter the vehicle and close the door. Sit back and adjust the seat. WARNING! 2. The seat belt latch plate is above the back of the front seat, next to your arm. Grasp the latch plate and pull • A belt that is buckled into the wrong buckle will out the belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 WARNING! Inserting Latch Plate Into Buckle • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over your shoulder so that your strongest bones will take the force in a collision.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. WARNING! • A lap belt worn too high can increase the risk of injury in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 6. To release the belt, push the red button on the buckle. Lap/Shoulder Belt Untwisting Procedure The belt will automatically retract to its stowed posi- Use the following procedure to untwist a twisted lap/ tion. If necessary, slide the latch plate down the shoulder belt. webbing to allow the belt to retract fully. 1. Position the latch plate as close as possible to the anchor point.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average, you will In the front seat, the shoulder belt can be adjusted upward prefer a lower position, and if you are taller than average, or downward to position the belt away from your neck. you will prefer a higher position. When you release the Push anchorage button to release the anchorage, and move anchorage, try to move it up or down to make sure that it is locked in position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 The chart below defines the type of feature for each seating ratcheting sound as the belt retracts. Allow the webbing position. to retract completely in this case and then carefully pull out only the amount of webbing necessary to comfortDriver Center Passenger ably wrap around the occupant’s mid-section. Slide the latch plate into the buckle until you hear a ⬙click.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the Automatic Locking Mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 This safety belt system has a retractor assembly that is designed to release webbing in a controlled manner. This feature is designed to help reduce the belt force acting on the occupant’s chest. Seat Belt Pretensioners The pretensioners are triggered by the Occupant Restraint Controller (ORC). Like the air bags, the pretensioners are single use items. A deployed pretensioner or a deployed air bag must be replaced immediately.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How The Active Head Restraints (AHR) Work The Occupant Restraint Controller (ORC) determines whether the severity, or type of rear impact will require the Active Head Restraints (AHR) to deploy. If a rear impact requires deployment, both the driver and front passenger seat AHRs will be deployed. When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 CAUTION! 1. Grasp the deployed AHR from the rear seat. All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 3 — Final Downward Movement To Engage Locking Mechanism 1 — Downward Movement 2 — Rearward Movement 4. The AHR front soft foam and trim half should lock into the back decorative plastic half.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Enhanced Seat Belt Use Reminder System (BeltAlert®) BeltAlert® is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert®) to fasten their seat belts. The feature is active whenever the ignition is on. If the driver or front seat passenger is unbelted, the Seat Belt Reminder Light will turn on and remain on until both front seat belts are fastened.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE unbuckled while traveling at speeds greater than 5 mph Seat Belts And Pregnant Women (8 km/h), BeltAlert® will provide both audio and visual We recommend that pregnant women use the seat belts notification. throughout their pregnancy. Keeping the mother safe is The front passenger seat BeltAlert® is not active when the best way to keep the baby safe. the front passenger seat is unoccupied.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 WARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have different rates of inflation that are based on several factors, including the severity and type of collision. vehicle is equipped with SABIC, they are located above the side windows. The trim covering the side air bags is labeled SRS AIRBAG.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Air Bag System Components • Front and Side Impact Sensors Your vehicle may be equipped with the following air bag • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, system components: and Seat Track Position Sensors • Occupant Restraint Controller (ORC) Advanced Front Air Bag Features • Air Bag Warning Light The Advanced Front Air Bag system has multistage driver and front passenger air bags.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • No objects should be placed over or near the air bag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bag to inflate. • Do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover. Each air bag deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air bag only. 2 Supplemental Side Air Bag Inflatable Curtain (SABIC) SABIC air bags may offer side-impact protection to front and rear seat outboard occupants in addition to that provided by the body structure.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • Air Bag covers may not be obvious in the interior trim; but they will open during air bag deployment. • Being too close to the SAB and SABIC air bags during deployment could cause you to be severely injured or killed. The system includes side impact sensors that are calibrated to deploy the side air bags during impacts that require air bag occupant protection.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 seriously injured or killed. Occupants, especially chil- Air Bag Deployment Sensors And Controls dren, should not lean on or sleep against the door, side Occupant Restraint Controller (ORC) windows, or area where the SAB or SABIC air bags inflate, even if they are in an infant or child restraint. The ORC is part of a Federally regulated safety system required for this vehicle.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Advanced Front Air Bags will not deploy in all frontal collisions, including some that may produce substantial vehicle damage — for example, some pole collisions, truck underrides, and angle offset collisions. On the other hand, depending on the type and location of impact, Advanced Front Air Bags may deploy in crashes with little vehicle front-end damage but that produce a severe initial deceleration.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 It also includes diagnostics that will illuminate the instrument cluster Air Bag Warning Light if a malfunction is noted that could affect the air bag system. The diagnostics also record the nature of the malfunction. WARNING! Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to protect you in a collision.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Seat-Mounted Side Air Bag (SAB) Inflator Units Supplemental Side Air Bag Inflatable Curtain (SABIC) Inflator Units The Supplemental Seat-Mounted Side Air Bags (SAB) are During collisions where the impact is confined to a designed to activate only in certain side collisions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Because air bag sensors estimate deceleration over time, • Turn on the interior lights, which remain on as long vehicle speed and damage are not good indicators of as the battery has power or until the ignition key is whether or not an air bag should have deployed. removed. Front And Side Impact Sensors — If Equipped • Unlock the doors automatically.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you do have a collision, which deploys the air bags, any or all of the following may occur: irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation continues, see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s instructions for cleaning.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Maintaining Your Air Bag System WARNING! (Continued) WARNING! • Modifications to any part of the air bag system could cause it to fail when you need it. You could be injured if the air bag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right side of the instrument panel.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Warning Light NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper air bag fuses. See your authorized dealer if the fuse is good.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 vehicle dynamics and safety systems for a short period of NOTE: EDR data are recorded by your vehicle only if a time, typically 30 seconds or less. The EDR in this vehicle non-trivial crash situation occurs; no data are recorded by is designed to record such data as: the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) • How various systems in your vehicle were operating; are recorded.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraints Everyone in your vehicle needs to be buckled up at all times, including babies and children. Every state in the United States, and every Canadian province, requires that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it. Standards. You should also make sure that you can install it in the vehicle where you will use it. NOTE: For additional information, refer to www.seatcheck.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Summary Of Recommendations For Restraining Children In Vehicles Infants and Toddlers Small Children Larger Children Children Too Large for Child Restraints Child Size, Height, Weight or Age Children who are two years old or younger and who have not reached the height or weight limits of their child restraint Children who are at least two years old or who have out-grown the height or weight limit of their rear-facing child restraint Children who have out-g
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE their infant carrier but are still less than at least two years old. Children should remain rearward-facing until they Safety experts recommend that children ride rearwardreach the highest weight or height allowed by their facing in the vehicle until they are two years old or until convertible child seat. they reach either the height or weight limit of their rear facing child safety seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 the seatback, they should use a belt-positioning booster seat. The child and belt-positioning booster seat are held Children who are two years old or who have outgrown in the vehicle by the seat belt. their rear-facing convertible child seat can ride forwardfacing in the vehicle.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Is the lap part of the belt as low as possible, touching the child’s thighs and not their stomach? Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend 5. Can the child stay seated like this for the whole trip? over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Recommendations For Attaching Child Restraints Restraint Type Rear-Facing Child Restraint Rear-Facing Child Restraint Forward-Facing Child Restraint Forward-Facing Child Restraint Combined Weight of the Child + Child Restraint Up to 65 lbs (29.5 kg) More than 65 lbs (29.5 kg) Up to 65 lbs (29.5 kg) More than 65 lbs (29.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors and Tethers for Children (LATCH) Restraint System Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCHequipped child seats. There are two lower anchorages located at the back of the seat cushion where it meets the seatback and one top tether anchorage located behind the seating position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 LATCH Positions For Installing Child Restraints In This Vehicle 2 Lower Anchorage Symbol 2 anchorages per seating position Top Tether Anchorage Symbol
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s weight + weight of the child restraint) for using the LATCH anchorage system to attach the child restraint? 65 lbs (29.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Can two child restraints be attached using a common lower LATCH anchorage? No Can the rear-facing child restraint touch the back of the front passenger seat? Yes Can the head restraints be removed? No Never “share” a LATCH anchorage with two or more child restraints.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage symbols on the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along gap between the seatback and seat cushion.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Locating The LATCH Anchorages In addition, there are tether strap anchorages behind each rear seating position located in the panel between the rear seatback and the rear window. These tether strap anchorages are under a plastic cover with the tether anchorage symbol on it.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower anchorage and a way to tighten the connection to the anchorage. Forward-facing child restraints and some rear-facing infant restraints will also be equipped with a tether strap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 4. Attach the lower hooks or connectors of the child restraint to the lower anchorages in the selected seat1. If the selected seating position has a Switchable Autoing position. matic Locking Retractor (ALR) seat belt, stow the seat belt, following the instructions below. See the section 5. If the child restraint has a tether strap, connect it to the top tether anchorage.
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Stow An Unused ALR Seatbelt When using the LATCH attaching system to install a child restraint, stow all ALR seat belts that are not being used by other occupants or being used to secure child restraints. An unused belt could injure a child if they play with it and accidentally lock the seatbelt retractor. Before installing a child restraint using the LATCH system, buckle the seat belt behind the child restraint and out of the child’s reach.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 be “switched” into a locked mode by pulling all of the Lap/Shoulder Belt Systems for Installing Child webbing out of the retractor and then letting the webbing Restraints in this Vehicle retract back into the retractor. If it is locked, the ALR will make a clicking noise while the webbing is pulled back into the retractor. For additional information on ALR, refer to the “Automatic Locking Mode” description under “Occupant Restraints.
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s weight + weight of the child restraint) for using the Tether Anchor with the seat belt to attach a forward facing child restraint? 65 lbs (29.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 5. To lock the seat belt, pull down on the shoulder part of the belt until you have pulled all the seat belt webbing out of the retractor. Then, allow the webbing to retract Place the child seat in the center of the seating back into the retractor. As the webbing retracts, you position. For some second row seats, you may need to will hear a clicking sound.
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 8. If the child restraint has a top tether strap and the Installing A Child Restraint With A Cinching seating position has a top tether anchorage, connect Latch Plate (CINCH) — If Equipped the tether strap to the anchorage and tighten the tether 1. Place the child seat in the center of the seating strap. Refer to “Lower Anchors and Tethers for Chilposition.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 If the buckle or the cinching latch plate is too close to the belt path opening of the child restraint, you may have trouble tightening the seat belt. If this happens, disconnect the latch plate from the buckle and twist the short buckle-end belt up to three full turns to shorten it. Insert the latch plate into the buckle with the release button facing out, away from the child restraint. Repeat steps 4 6.
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing Child Restraints Using The Top Tether Anchorage restraint and pass the tether strap around the outboard side of the head restraint. 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 4. Attach the tether strap hook of the child restraint to ENGINE BREAK-IN RECOMMENDATIONS the top tether anchorage as shown in the diagram. A long break-in period is not required for the engine and 5. Remove slack in the tether strap according to the child drivetrain (transmission and axle) in your vehicle. restraint manufacturer’s instructions. Drive moderately during the first 300 miles (500 km).
98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! WARNING! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 Exhaust Gas WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO), follow these safety tips: • Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area.
100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Safety Checks You Should Make Inside The Vehicle Seat Belts dealer. If the light stays on, flickers, or comes on while driving, have the system checked by an authorized dealer. Inspect the belt system periodically, checking for cuts, Defroster frays, and loose parts. Damaged parts must be replaced Check operation by selecting the defrost mode and place immediately. Do not disassemble or modify the system. the blower control on high speed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 WARNING! WARNING! (Continued) Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury. • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle.
102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside The Vehicle Door Latches Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Check the wheel nuts for tightness. Check the tires (including spare) for proper cold inflation pressure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 MIRRORS . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . . .121 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . .107 ▫ Uconnect® Phone Features . . . . . . . . . . . . . . .124 ▫ Automatic Dimming Mirror — If Equipped . . .108 ▫ Advanced Phone Connectivity . . . . . . . . . . . .129 ▫ Power Mirrors . . . . . . . . . . . . . . . . . . . . . . .
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 SEATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148 䡵 LIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164 ▫ Power Seats — If Equipped . . . . . . . . . . . . . .149 ▫ Multifunction Lever . . . . . . . . . . . . . . . . . . . .164 ▫ Heated Seats — If Equipped . . . . . . . . . . . . .151 ▫ Headlights And Parking Lights . . . . . . . . . . . .164 ▫ Manual Front Seat Adjustment . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 ▫ Instrument Panel Dimmer . . . . . . . . . . . . . . .168 ▫ To Deactivate . . . . . . . . . . . . . . . . . . . . . . . .178 ▫ Map/Reading/Interior Lights . . . . . . . . . . . .169 ▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . .178 ▫ Battery Saver Feature . . . . . . . . . . . . . . . . . .170 ▫ To Vary The Speed Setting . . . . . . . . . . . . . . .178 䡵 WINDSHIELD WIPERS AND WASHERS . . . . . .170 ▫ To Accelerate For Passing . . . . . .
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 POWER SUNROOF — IF EQUIPPED . . . . . . . .189 䡵 CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . ▫ Opening Sunroof — Express . . . . . . . . . . . . . .190 䡵 CUPHOLDERS . . . . . . . . . . . . . . . . . . . . ▫ Opening Sunroof — Manual Mode . . . . . . . . .190 ▫ Front Seat Cupholders . . . . . . . . . . . . . . ▫ Closing Sunroof — Express. . . . . . . . . . . . . . .190 ▫ Rear Cupholders . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. 3 Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate. NOTE: This feature is disabled when the vehicle is moving in reverse.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 To adjust a mirror, turn the control wand toward the left Power Mirrors The power mirror control is located on the driver’s door or right mirror positions indicated. Tilt the control wand in the direction you want the mirror to move. trim panel. 3 Power Mirror Control Mirror Directions When you are finished adjusting the mirror, turn the control to the center position to prevent accidentally moving a mirror.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting Side View Mirrors WARNING! (Continued) Outside Mirror — Driver Side Adjust the outside mirror to center on the adjacent lane of traffic, with a slight overlap of the view obtained on the inside mirror. Outside Mirror — Passenger Side side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger side convex mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature can be activated whenever you turn on the rear window defroster if equipped. Some vehicles may not be equipped with rear window defroster, in this case the heated mirrors will still function as intended. Refer to “Rear Window Features” in “Understanding The Features Of Your Vehicle” for further information.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect® Phone allows you to transfer calls between the Uconnect® Phone is a voice-activated, hands-free, in- system and your mobile phone as you enter or exit your vehicle communications system. Uconnect® Phone allows vehicle and enables you to mute the system’s microphone you to dial a phone number with your mobile phone using for private conversation. simple voice commands (e.g.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 WARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws, including laws regarding phone use. Your attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Operation Voice commands can be used to operate the Uconnect® Phone and to navigate through the Uconnect® Phone menu structure. Voice commands are required after most Uconnect® Phone prompts. You will be prompted for a specific command and then guided through the available options. part of the command when you are asked for it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 To activate the Uconnect® Phone, simply press the The following are general phone to Uconnect® Phone button and follow the audible prompts for directions. pairing instructions: Uconnect® Phone sessions begin with a press of the button to begin. • Press the button on the radio control head. • After the “Ready” prompt and the following beep, say Cancel Command “Device Pairing”.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • You will then be asked to give your mobile phone a priority level between one and seven, with one being the highest priority. You can pair up to seven mobile phones to your Uconnect® Phone. However, at any given time, only one mobile phone can be in use, connected to your Uconnect® System. The priority allows the Uconnect® Phone to know which mobile phone to use if multiple mobile phones are in the vehicle at the same time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 or downloaded phonebook. To learn how to store a • Automatic download and update, if supported, begins as soon as the Bluetooth® wireless phone connection is name in the phonebook, refer to “Add Names to Your made to the Uconnect® Phone, for example, after you Uconnect® Phonebook”. start the vehicle.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • This downloaded phonebook cannot be edited or • When prompted, enter the number designation (e.g., “Home”, “Work”, “Mobile”, or “Other”). This deleted on the Uconnect® Phone. These can only be will allow you to store multiple numbers for each edited on the mobile phone. The changes are transphonebook entry, if desired. ferred and updated to Uconnect® Phone on the next phone connection.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in NOTE: the phonebook, call the number you just edited, or return • Editing names in the phonebook is recommended to the main menu. when the vehicle is not in motion. “Phonebook Edit Entry” can be used to add another • Automatic downloaded phonebook entries cannot be phone number to a name entry that already exists in the phonebook.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. You can either say the name of a phonebook entry that you wish to delete or you can say “List Names” to hear a list of the entries in the phonebook from which you choose. To select one of the entries from the list, button while the Uconnect® Phone is press the playing the desired entry and say “Delete”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 List All Names In The Uconnect® Phonebook • Press the Phone Call Features The following features can be accessed through the Uconnect® Phone if the feature(s) are available on your • After the “Ready” prompt and the following beep, say mobile service plan. For example, if your mobile service “Phonebook List Names”. plan provides three-way calling, this feature can be • The Uconnect® Phone will play the names of all the accessed through the Uconnect® Phone.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE call. The first call will be on hold while the second call is in progress. To go back to the first call, refer to “Toggling Between Calls” in this section. To combine two calls, refer If a call is currently in progress and you have another to “Conference Call” in this section. incoming call, you will hear the same network tones for call waiting that you normally hear when using your Place/Retrieve A Call From Hold button to place the current mobile phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Conference Call Call Termination When two calls are in progress (one active and one on button until you hear a hold), press and hold the double beep indicating that the two calls have been joined into one conference call. To end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Call Continuation Uconnect® Phone Features Call continuation is the progression of a phone call on the Language Selection Uconnect® Phone after the vehicle ignition has been To change the language that the Uconnect® Phone is using: switched to OFF. Call continuation functionality avail• Press the button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 Emergency Assistance NOTE: If you are in an emergency and the mobile phone is • The emergency number dialed is based on the country reachable: where the vehicle is purchased (911 for the U.S. and Canada and 060 for Mexico). The number dialed may • Pick up the phone and manually dial the emergency not be applicable with the available mobile service and number for your area. area.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To use you Uconnect® Phone System in an emergency, your mobile phone must be: • turned on, • paired to the Uconnect® System, • and have network coverage. Roadside Assistance If you need roadside assistance: for the U.S., 1-877-213-4525 for Canada, 55-14-3454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 “Send”, is also to be used for navigating through an automated customer service center menu structure, and This method is used in instances where one generally has to leave a number on a pager. to press numbers on the mobile phone keypad while navigating through an automated telephone system.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Barge In — Overriding Prompts Phone And Network Status Indicators The “Voice Command” button can be used when you wish to skip part of a prompt and issue your voice command immediately. For example, if a prompt is asking “Would you like to pair a phone, clear a...,” you could press the button and say, “Pair a Phone” to select that option without having to listen to the rest of the voice prompt.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect® Phone to play it on the vehicle audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE List Paired Mobile Phone Names • Press the button to begin. • After the “Ready” prompt and the following beep, say “Setup Phone Pairing”. • When prompted, say “List Phones”. • After the “Ready” prompt and the following beep, say “Setup Select Phone” and follow the prompts. • You can also press the button at any time while the list is being played, and then choose the phone that you wish to select. • The selected phone will be used for the next phone call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 • At the next prompt, say “Delete” and follow the From outside the Uconnect® Phone mode (e.g., from prompts. radio mode): • You can also press the button at any time while the • Press and hold the button for five seconds until list is being played, and then choose the phone you the session begins, or, wish to delete.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reset • Press the button. • Make sure that no one other than you is speaking during a Voice Command period. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, This will delete all phone pairing, phone book entries, • low road noise, and other settings in all language modes. The System will • smooth road surface, prompt you before resetting to factory settings.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • Storing names in the phonebook when the vehicle is Far End Audio Performance not in motion is recommended. • Audio quality is maximized under: • It is not recommended to store similar sounding names • low-to-medium blower setting, in the Uconnect® Phonebook. • low-to-medium vehicle speed, • low road noise, • Phonebook (Downloaded and Uconnect® Phone Local) name recognition rate is optimized when the entries are • smooth road surface, not similar.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Recent Calls • Uconnect® Phone will play the new text message for you. If your phone supports “Automatic Phonebook Download”, Uconnect® Phone can list your Outgoing, Incom- After reading a message, you can “Reply” or “Forward” ing and Missed Calls. the message using Uconnect® Phone. Voice Text Reply Send Messages: Uconnect® Phone can read or send new messages on You can send messages using Uconnect® Phone. To send your phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Uconnect® Phone will prompt you to say the name or 10. number of the person you wish to send the message to. 11. List of Preset Messages: 12. 1. Yes 13. 2. No 14. 3. Where are you? 15. 4. I need more direction. 16. 5. L O L 17. 6. Why 18. 7. I love you 19. 8. Call me 20. 9.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn SMS Incoming Announcement ON/OFF Bluetooth® Communication Link Turning the SMS Incoming Announcement OFF will stop Mobile phones have been found to lose connection to the the system from announcing the new incoming mes- Uconnect® Phone. When this happens, the connection can generally be reestablished by switching the phone sages. off/on. Your mobile phone is recommended to remain in button. • Press the Bluetooth® ON mode.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 3
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 3
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Primary Alternate (s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all call Voice Commands Primary Alternate (s) cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home language list names
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Voice Commands Primary Alternate (s) list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book previous record again redial Voice Commands Primary Alternate (s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect® Tutorial voice training work yes 3
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information of devices, Bluetooth Streaming Audio Device, satellite radio, disc player, and a memo recorder. This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the NOTE: Take care to speak into the Voice Interface Sysfollowing conditions: tem as calmly and normally as possible.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 NOTE: If you do not say a command within a few When using this system, you should speak clearly and at seconds, the system will present you with a list of options. a normal speaking volume. If you ever wish to interrupt the system while it lists The system will best recognize your speech if the winoptions, press the Voice Command button, listen for dows are closed, and the heater/air conditioning fan is set to low. the beep, and say your command.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Changing the Volume • “Disc” (to switch to the disc mode) 1. Start a dialogue by pressing the Voice Command • “USB” (to switch to USB mode) button. • “Bluetooth Streaming” (to switch to Bluetooth® Streaming mode) 2. Say a command (e.g., “Help”). 3. Use the ON/OFF VOLUME rotary knob to adjust the • “Memo” (to switch to the memo recorder) volume to a comfortable level while the Voice Command • “System Setup” (to switch to system setup) system is speaking.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Radio FM • “Previous Channel” (to select the previous channel) To switch to the FM band, say “FM” or “Radio FM”.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE USB Mode Memo Mode To switch to USB mode, say “USB”. In this mode, you may say the following commands: To switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands: • “Next Track” (to play the next track) • “New Memo” (to record a new memo) — During the recording, you may press the Voice Command • “Previous Track” (to play the previous track) button to stop recording.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 – “Previous” (to play the previous memo) – “Delete” (to delete a memo) • “Delete All” (to delete all memos) In this mode, you may say the following commands: • “Language English” • “Language French” Setup • “Language Spanish” To switch to system setup, you may say one of the • “Tutorial” following: • “Voice Training” • “Change to setup” • “Switch to system setup” • “Change to setup” • “Main menu setup” or • “Switch to setup” NOTE: Keep in mind that you hav
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training SEATS For users experiencing difficulty with the system recog- Seats are a part of the Occupant Restraint System of the nizing their voice commands or numbers the Uconnect® vehicle. Voice “Voice Training” feature may be used. button, say “System 1. Press the Voice Command Setup” and once you are in that menu then say “Voice Training.” This will train your own voice to the system and will improve recognition. 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Power Seats — If Equipped The power seat switches are located on the outboard side of the seat near the floor. Use the bottom switch to move the seat up, down, forward, rearward, or to tilt the seat. The top switch controls the seatback recliner. Power Seat Switches WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. Tilting The Seat Up Or Down The angle of the seat cushion can be adjusted in four directions. Pull upward or push downward on the front or rear of the seat switch, the front or rear of the seat cushion will move in the direction of the switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 WARNING! (Continued) • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the HIGH-level setting is selected, the heater will provide a boosted heat level during the first four minutes of operation. Then, the heat output will drop to the normal HIGH-level. If the HIGH-level setting is selected, the system will automatically switch to LOW-level after a maximum of 60 minutes of continuous operation. At that time, the number of illuminated LEDs changes from two to one, indicating the change.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Pull the bar upward to move the seat forward or rearThe manual seat adjustment bar is at the front of the seat, ward. Release the bar once the seat is in the position desired. Then, using body pressure, move forward and near the floor. rearward on the seat to be sure that the seat adjusters have latched. Manual Front Seat Adjustment WARNING! Adjusting a seat while the vehicle is moving is dangerous.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver Seat Manual Height Adjuster — If Equipped Reclining Seats A lever style height adjustment feature enhances comfort for petite as well as tall drivers. A lever with a ratcheting mechanism, located on the outboard side of the seat, raises and lowers it. Total travel is 2.2 in (56 mm). The recline lever is located on the side of the seat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Head Restraints Active Head Restraints — Front Seats Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the push button, located at the base of the head restraint, and push downward on the head restraint. For comfort the Active Head Restraints can be tilted forward and rearward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • In the event of deployment of an Active Head Restraint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Your Vehicle” for further information. WARNING! Active Head Restraint (Tilted) NOTE: • The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 WARNING! (Continued) • Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. To avoid accidental deployment of the Active Head Restraint ensure that all cargo is secured, as loose cargo could contact the Active Head Restraint during sudden stops. Failure to follow this warning could cause personal injury if the Active Head Restraint is deployed.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The hard seatback features a work surface and a molded Folding Rear Seat rim for retaining items stored on the seatback panel. To provide additional storage area, the rear seatback can be folded forward. Pull on the loops to fold down either or both seatbacks.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 When returning the rear seatback to the upright position, Folding Rear Seat Center Armrest be sure the seatback is latched. The rear seat is equipped with a folding armrest with cupholders. WARNING! The rear cargo area of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children. They could be seriously injured in a collision. Children should be seated and using the proper restraint system.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD To open the hood, two latches must be released. 2. Then lift the secondary latch located under the front edge of the hood, near the center and raise the hood. 1. Pull the hood release lever located under the left side of the instrument panel. Hood Safety Latch Location Hood Release Lever Use the hood prop rod to secure the hood in the open position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 CAUTION! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. 3 WARNING! Prop Rod Location NOTE: Before closing the hood, make sure to stow the prop rod in its proper location. Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Headlights And Parking Lights Turn the end of the multifunction lever to the first detent Multifunction Lever The multifunction lever controls the operation of the for parking light operation. Turn to the second detent for parking lights, headlights, headlight beam selection, headlight operation. passing light, fog lights, instrument panel light dimming and turn signals. The multifunction lever is located on the left side of the steering column.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Automatic Headlights — If Equipped Turning the end of the multifunction lever to the third detent (AUTO), will activate the automatic headlight system. With the engine running and the multifunction lever in the AUTO position, the headlights will turn on and turn off based on the surrounding light levels. Headlight Time Delay There is also a feature that delays turning off the vehicle lights for 30, 60 or 90 seconds after the ignition switch is turned OFF.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If either light remains on and does not flash, or Move the multifunction lever up or down and the arrows there is a very fast flash rate, check for a defective outside on each side of the instrument cluster flash to show light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is proper operation of the front and rear turn signal lights. defective.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Flash-To-Pass You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will turn on the high beam headlights until the lever is released. NOTE: If the multifunction lever is held in the flash-topass position for more than 15 seconds, the high beams will shut off. If this occurs, wait 30 seconds for the next flash-to-pass operation.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the center portion of the lever upward to the next detent position to brighten the odometer and radio when The front turn signal lamps will turn on as Daytime the parking lights or headlights are on.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Map/Reading/Interior Lights These lights are mounted between the sun visors above the rearview mirror. Each light can be turned on by pressing the barrel. Press the barrel a second time to turn the light off. Both of these lights can swivel so that the light can be aimed at a specific spot, if desired. The lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open. To restore interior light operation, either turn the ignition switch ON or cycle the light switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 CAUTION! • Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Intermittent Wiper System Use the intermittent wiper system when weather conditions make a single wiping cycle with a variable pause between cycles desirable. Rotate the end of the windshield wiper/washer control lever to the first detent, and then turn the end of the lever to select the desired delay interval.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 Windshield Washers To use the washer, pull the windshield wiper/washer control lever toward you and hold it for as long as washer spray is desired. If you activate the washer while the wiper control is in the delay range, the wipers will operate in low-speed for two wipe cycles after releasing the lever and then resume the intermittent interval previously selected. WARNING! Sudden loss of visibility through the windshield could lead to a collision.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be used in order to spray the windshield with washer fluid.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping lever is located below the steering wheel at the end of the steering column. To unlock the steering column, push the lever downward. To tilt the steering column, move the steering wheel upward or downward as desired.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 NOTE: In order to ensure proper operation, the Electronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. To Activate Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory. Pressing the ON/OFF button or turning the ignition switch OFF erases the set speed memory. increase until the button is released, then the new set speed will be established. Pressing the RES (+) button once will result in a 1 mph (1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Electronic Speed Press the accelerator as you would normally. When the Control. pedal is released, the vehicle will return to the set speed. To Accelerate For Passing Using Electronic Speed Control On Hills The transmission may downshift on hills to maintain the vehicle set speed. NOTE: The Electronic Speed Control system maintains speed up and down hills.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED HomeLink® replaces up to three hand-held transmitters that operate devices such as garage door openers, motorized gates, lighting or home security systems. The HomeLink® unit is powered by your vehicles 12 Volt battery. The HomeLink® buttons, located on either the overhead console, headliner or sunvisor, designate the three different HomeLink® channels.The HomeLink® indicator is located above the center button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Before You Begin Programming HomeLink® Be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmission of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink® system. Erase all channels before you begin programming.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons. • If you have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the Internet at www.HomeLink.com for information or assistance. Programming A Rolling Code For programming garage door openers that were manufactured after 1995.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 1. Turn the ignition switch to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. Firmly press and release the “LEARN” or “TRAINING” button. On some garage door openers/devices there may be a light that blinks when the garage door opener/device is in the LEARN/TRAIN mode. NOTE: You have 30 seconds in which to initiate the next 3.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Simultaneously press and hold both the Homelink® button you want to program and the hand-held transTo reprogram a channel that has been previously trained, mitter button. follow these steps: Reprogramming A Single HomeLink® Button 4. Continue to hold both buttons and observe the indicator light. The Homelink® indicator will flash slowly 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to To reprogram a channel that has been previously trained, time-out in the same manner. follow these steps: It may be helpful to unplug the device during the cycling 1. Cycle the ignition to the ON/RUN position. process to prevent possible overheating of the garage 2. Press and hold the desired HomeLink® button until door or gate motor.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Watch for the HomeLink® indicator to change flash Reprogramming A Single HomeLink® Button rates. When it changes, it is programmed. It may take To reprogram a channel that has been previously trained, up to 30 seconds or longer in rare cases. The garage follow these steps: door may open and close while you are programming. 1. Cycle the ignition to the ON/RUN position. 5. Press and hold the programmed HomeLink® button 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 Using HomeLink® Troubleshooting Tips To operate, press and release the programmed HomeLink® button. Activation will now occur for the programmed device (i.e., garage door opener, gate operator, security system, entry door lock, home/office lighting, etc.,). The hand-held transmitter of the device may also be used at any time.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Your motorized door or gate will open and close while you are programming the universal transceiver. Do not program the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards. This includes most garage door opener models manufactured after 1982.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 POWER SUNROOF — IF EQUIPPED The sunroof controls are mounted between the dome/ reading lights. Power Sunroof Switch WARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE position. The sunroof will close fully and stop automatically. This is called “Express Close”. During Express Press the switch rearward and release it within one-half Close operation, any movement of the switch will stop second. The sunroof and sunshade will open automatithe sunroof. cally from any position. The sunroof and sunshade will open fully and stop automatically. This is called “Express Closing Sunroof — Manual Mode Open”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 NOTE: If three consecutive sunroof close attempts result in Pinch Protect reversals, the fourth close attempt will be a Manual Close movement with Pinch Protect disabled. Venting Sunroof — Express Press and release the Vent button within one half second and the sunroof will open to the vent position. This is called “Express Vent”, and it will occur regardless of sunroof position. During Express Vent operation, any movement of the switch will stop the sunroof.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The instrument panel power outlet, located below the climate control knobs, has power available only when the For Vehicles Not Equipped With The Electronic Vehicle ignition is ON. This power outlet will also operate a Information Center (EVIC) conventional cigar lighter unit. The power sunroof switch will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 A second power outlet is located inside the center console. NOTE: To ensure proper operation a MOPAR® knob and element must be used. CAUTION! Center Console Power Outlet The center console power outlet is powered directly from the battery (power available at all times). Items plugged into this power outlet may discharge the battery and/or prevent the engine from starting. • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts.
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Rear Cupholders The rear seat cupholders are located in the armrest between Front Seat Cupholders The cupholders in the center console will accommodate the rear seats. Pull down the armrest to use the cupholders. either two large size cups or two 20 oz (.5 L) bottles or cans. The one-peice insert can be easily removed for cleaning. An optional removable ashtray may be located in one of the cupholders.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 Rear Seat Bottle Holder There are built-in bottle holders located in both rear door trim panels. Rear Bottle Holder WARNING! If containers of hot liquid are placed in the bottle holder, they can spill when the door is closed, burning the occupants. Be careful when closing the doors to avoid injury.
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE CONSOLE FEATURES Glovebox Storage Compartment The glovebox storage compartment is located on the right side of the instrument panel. To open the glovebox, pull outward on the latch handle located on the front of the glovebox. Storage Glovebox Storage Compartment The center console is located between the front driver and passenger seats. The center console armrest slides forward from design position to provide added user comfort.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 3 Center Console Armrest Center Console Storage Two separate storage compartments are also located The top compartment holds small items, such as a pen underneath the armrest. and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also contains a 12 Volt power outlet. The console’s front opening lid allows for easy access to these compartments.
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: CARGO AREA FEATURES • A notch in the front of the console base allows for use The 60/40 split-folding rear seat provides cargo-carrying of a cellular phone while it is plugged into the power versatility. The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters. When outlet with the armrest latched down.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 WARNING! (Continued) • The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion. They could be seriously injured in a collision. Children should be seated and using the proper restraint system. • To help protect against personal injury, passengers should not be seated in the rear cargo area.
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ski Pass-Through REAR WINDOW FEATURES There is a ski pass-through door located behind the rear Rear Window Defroster seat armrest that allows longer items, such as snow skis, to The rear window defroster button is located on be stored in the rear cargo area. Lower the armrest and pull the climate control (Mode) knob. Press this button downward on the latch to open the ski pass-through door.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 INSTRUMENT PANEL FEATURES. . . . . . . . . . .208 ▫ EVIC Main Menu . . . . . . . . . . . . . . . . . . . . .229 䡵 INSTRUMENT CLUSTER . . . . . . . . . . . . . . . . .209 ▫ Compass Display . . . . . . . . . . . . . . . . . . . . .230 䡵 INSTRUMENT CLUSTER DESCRIPTIONS . . . . .210 ▫ Average Fuel Economy. . . . . . . . . . . . . . . . . .232 䡵 MINI-TRIP COMPUTER — IF EQUIPPED . . . . .223 ▫ Distance To Empty (DTE) . . . . . . . . . . . . . . . .
206 UNDERSTANDING YOUR INSTRUMENT PANEL 䡵 SETTING THE ANALOG CLOCK . . . . . . . . . . .237 䡵 Uconnect® 730N/430/430N CD/DVD/ HDD/NAV — IF EQUIPPED . . . . . . . . . . . . . .238 ▫ Operation Instructions — CD MODE for CD and MP3 Audio Play . . . . . . . . . . . . . . . .254 ▫ Notes On Playing MP3 Files . . . . . . . . . . . . . .256 ▫ Operating Instructions (Voice Command System) — If Equipped. . . . .238 ▫ LIST Button (CD Mode for MP3 Play) . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 207 ▫ List Or Browse Mode . . . . . . . . . . . . . . . . . . .268 䡵 RADIO OPERATION AND MOBILE PHONES . . .273 ▫ Bluetooth Streaming Audio (BTSA) . . . . . . . . .270 䡵 CLIMATE CONTROLS . . . . . . . . . . . . . . . . . . .273 䡵 STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . .271 ▫ Manual Heating And Air Conditioning . . . . . .273 ▫ Radio Operation . . . . . . . . . . . . . . . . . . . . . .
208 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 2 3 4 5 — Air Outlet — Side Window Demister Outlet — Instrument Cluster — Ignition Switch — Analog Clock 6 — Radio 7 — Passenger Airbag 8 — Glove Compartment 9 — Heated Seat Switch – If Equipped 10 — Hazard Switch 11 — Storage Compartment 12 — Climate Control 13 — Trunk Release Button 14 — Power Outlet
UNDERSTANDING YOUR INSTRUMENT PANEL 209 INSTRUMENT CLUSTER 4
210 UNDERSTANDING YOUR INSTRUMENT PANEL removes this heat. You can also turn the Temperature control to maximum heat, the Mode control to Floor and 1. Temperature Gauge the Fan control to High. This allows the heater core to act The temperature gauge shows engine coolant tempera- as a supplement to the radiator and aids in removing heat ture. Any reading below the red mark of the gauge shows from the engine cooling system. that the engine cooling system is operating properly. The 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 211 5. Low Fuel Light If jump starting is required, refer to “Jump Starting Procedures” in “What To Do In Emergencies”. When the fuel level drops to approximately 2.0 gallons (7.6 Liters), the fuel symbol will light 7. Air Bag Warning Light and a single chime will sound. This light will turn on for four to eight seconds as a bulb check when the ignition switch is first NOTE: This light will remain on until a minimum of turned to ON/RUN.
212 UNDERSTANDING YOUR INSTRUMENT PANEL After the bulb check or when driving, if the driver seat 10. Engine Temperature Warning Light belt remains unbuckled, the Seat Belt Warning Light will This light warns of an overheated engine condiflash or remain on continuously. Refer to “Occupant tion. As engine coolant temperatures rise and the Restraints” in “Things To Know Before Starting Your gauge approaches H, this indicator will illuminate and a Vehicle” for further information.
UNDERSTANDING YOUR INSTRUMENT PANEL 213 11. Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system. The dual brake system provides a reserve braking capacity in the event of a failure to a portion of the hydraulic system.
214 UNDERSTANDING YOUR INSTRUMENT PANEL off unless the parking brake is applied or a brake fault is NOTE: You must apply the brakes before shifting from detected. If the light does not illuminate, have the light PARK. inspected by an authorized dealer. 14. Odometer Display/Trip Odometer Display The light also will turn on when the parking brake is The odometer display shows the total distance the veapplied with the ignition switch in the ON/RUN position. hicle has been driven.
UNDERSTANDING YOUR INSTRUMENT PANEL 215 The two trip odometers show individual trip mileage. To switch from odometer to trip odometers, press and release the Trip Odometer button. To reset a trip odometer, display the desired trip odometer to be reset then push and hold the button until the display resets (approximately 2 seconds). Refer to “Trip Odometer Button” for additional information.
216 UNDERSTANDING YOUR INSTRUMENT PANEL change indicator system is duty cycle based, which means the engine oil change interval may fluctuate If the vehicle diagnostic system detects a leak or change dependent upon your personal driving style. in the evaporative system, or the fuel filler cap is loose, improperly installed, or damaged, the words “gASCAP” Unless reset, this message will continue to display each will display in the odometer display area.
UNDERSTANDING YOUR INSTRUMENT PANEL 217 For vehicles equipped with the Electronic Vehicle Infor- 17. Electronic Throttle Control (ETC) Indicator Light mation Center (EVIC), refer to “Electronic Vehicle InforThis light informs you of a problem with the mation Center (EVIC)”. Electronic Throttle Control (ETC) system. If a 15. Cruise Indicator — If Equipped problem is detected, the light will come on while the engine is running.
218 UNDERSTANDING YOUR INSTRUMENT PANEL 18. Park/Headlight ON Indicator — If Equipped This indicator will illuminate when the park lights or headlights are turned on. 21. Front Fog Light Indicator — If Equipped This indicator will illuminate when the front fog lights are on. 22. Vehicle Security Light — If Equipped 19. Electronic Stability Control (ESC) OFF Indicator Light — If Equipped This light will flash rapidly for approximately 16 seconds when the alarm system is arming.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 the conventional brake system will continue to operate Light” comes on continuously with the engine running, a normally provided that the BRAKE warning light is malfunction has been detected in the ESC system. If this light remains on after several ignition cycles, and the not on.
220 UNDERSTANDING YOUR INSTRUMENT PANEL 25. Tire Pressure Monitoring Telltale Light Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 alternate tires or wheels on the vehicle that prevent the 26. Malfunction Indicator Light (MIL) TPMS from functioning properly.
222 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! Prolonged driving with the MIL on could cause damage to the engine control system. It also could affect fuel economy and drivability. If the MIL is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required. WARNING! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions.
UNDERSTANDING YOUR INSTRUMENT PANEL 223 WARNING! If you continue operating the vehicle when the Transmission Temperature Warning Light is illuminated you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. MINI-TRIP COMPUTER — IF EQUIPPED The Mini-Trip Computer is located in the instrument cluster and features a driver-interactive trip information and temperature display.
224 UNDERSTANDING YOUR INSTRUMENT PANEL Control Buttons RESET Button To reset the display shown, turn the ignition switch to the ON position, then press and hold the RESET button located on the steering wheel. The following displays can be reset or changed: • Trip A • Trip B Trip Odometer (ODO) This display shows the distance traveled since the last reset. Press and release the STEP button on the instrument cluster to switch from odometer, to Trip A or Trip B.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED The EVIC consists of the following: • Compass Heading Display (N, S, E, W, NE, NW, SE, SW) The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the • Mileage (Avg/MPG) instrument cluster. • Miles To Empty • Low Tire Information (Tire Pressure Monitor System (TPMS) Displays) — if equipped • Timer • Units • System Warnings (Door Ajar, etc.
226 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by MENU Button pressing the following buttons on the instrument panel Press and release the MENU button to advance switch bank located below the climate controls: the display to each of the EVIC Main Menu features. Upon reaching the last item in the Main Menu the EVIC will advance to the first item in the Main Menu with the next MENU button press and release.
UNDERSTANDING YOUR INSTRUMENT PANEL 227 SELECT Button • Right Rear Turn Signal Lamp Out (with a single chime) Press and release the SELECT Button to accept • RKE (Remote Keyless Entry) Battery Low (with a single chime) a selection. The SELECT Button also resets various Trip Functions.
228 UNDERSTANDING YOUR INSTRUMENT PANEL • Key In Ignition • Remote start aborted — Door ajar • Remote start aborted — Hood ajar • Remote start aborted — Trunk ajar • Remote start aborted — Fuel low • Remote start disabled — System fault • Oil Change Required (with a single chime) Oil Change Required — If Equipped Your vehicle is equipped with an engine oil change indicator system.
UNDERSTANDING YOUR INSTRUMENT PANEL 229 3. Turn the ignition switch to the LOCK position. • Elapsed Time NOTE: If the indicator message illuminates when you • EVIC Units Selection start the vehicle, the oil change indicator system did not • System Status reset. If necessary repeat this procedure.
230 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Display Automatic Compass Calibration COMPASS Button This compass is self-calibrating, which eliminates the need to calibrate the compass manually. When the vehicle is new, the compass may appear erratic and the EVIC will flash the “CAL” indicator until the compass is calibrated. You may calibrate the compass by completing one or more 360–degree turns (in an area free from large metal or metallic objects) until the CAL indicator in the EVIC turns off.
UNDERSTANDING YOUR INSTRUMENT PANEL 231 Manual Compass Calibration Compass Variance If the compass appears erratic or inaccurate, and the variance has been properly set, you may wish to manually recalibrate the compass. To manually calibrate the compass: 1. 2. 3. 4. Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differences, the variance should be set for the zone where the vehicle is driven, per the zone map. Once properly Start the engine.
232 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Press and release the DOWN button until “Compass Variance” and the current Variance Value displays in the EVIC. 4. Press and release the SELECT button to increment the Variance Value by one, (one button press per update), until the proper variance zone is selected according to the map. NOTE: The Variance Values will wrap around from 15 back to 1. The Default Variance is Zone 8.
UNDERSTANDING YOUR INSTRUMENT PANEL 233 Distance To Empty (DTE) Tire PSI Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. DTE cannot be reset. Press and release the MENU button until ⬙Tire PSI⬙ is displayed.
234 UNDERSTANDING YOUR INSTRUMENT PANEL Elapsed Time System Status Shows the total elapsed time of travel since the last reset. Displays SYSTEM OK if there are no active Warning Elapsed time will increment when the ignition switch is Messages stored. Pressing and releasing the DOWN in the RUN or START position. button when SYSTEM OK is displayed will do nothing. Displays SYSTEM WARNINGS PRESENT if there are Elapsed time is displayed as follows: active Warning Messages stored.
UNDERSTANDING YOUR INSTRUMENT PANEL 235 Press and release the DOWN button to display the RKE Unlock following programmable features: When “Driver Door 1st Press” is selected, only the driver’s door will unlock on the first press of the Remote Language Keyless Entry (RKE) transmitter UNLOCK button. When When in this display you may select different languages Driver Door 1st Press is selected, you must press the RKE for all display nomenclature, including the trip functions.
236 UNDERSTANDING YOUR INSTRUMENT PANEL 10 seconds after the wipers are turned on. The headlights will also turn off when the wipers are turned off if they When ON is selected, the front and rear turn signals will were turned on by this feature. To make your selection, flash when the doors are locked or unlocked with the RKE press the SELECT button until ON or OFF appears. transmitter. This feature may be selected with or without the Sound Horn on lock feature selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 237 Illumin. Approach SETTING THE ANALOG CLOCK When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the remote keyless entry transmitter. To make your selection, press the SELECT button until “OFF,” “30 sec,” “60 sec,” or “90 sec” appears. To set the analog clock, located at the top center of the instrument panel, press and hold the button in until the setting is correct.
238 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect® 730N/430/430N CD/DVD/HDD/NAV — IF EQUIPPED Uconnect® 130 Refer to your Uconnect® user’s manual for detailed operating instructions. Operating Instructions (Voice Command System) — If Equipped Refer to “Voice Command” for further details. Operating Instructions (Uconnect® Phone) — If Equipped Refer to “Uconnect® Phone” for further details.
UNDERSTANDING YOUR INSTRUMENT PANEL 239 Power Switch/Volume Control (Rotary) TIME Button Push the ON/VOLUME control knob to turn on the Press the TIME button to alternate display of the time radio. Push the ON/VOLUME control knob a second and radio frequency. time to turn off the radio. Clock Setting Procedure Electronic Volume Control 1. Press and hold the TIME button until the hours blink. The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turn- 2.
240 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL Pressing the RW (Rewind) or FF (Fast Forward) buttons control knob to the right or left to increase or decrease the causes the tuner to search for the next frequency in the treble tones. direction of the arrows. This feature operates in either AM or FM frequencies. Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display.
UNDERSTANDING YOUR INSTRUMENT PANEL 241 AM/FM Button Press the buttons to select either AM or FM mode. SET/RND Button — To Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory, press the SET/RND button. The symbol SET 1 will now show in the display window. Select the button (1 to 6) you wish to lock onto this station and press and release that button.
242 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and • The ignition switch must be in the ON or ACC position seconds. Play will begin at the start of track 1. to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 243 CAUTION! (Continued) • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player. EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. SEEK Button Press the right SEEK button for the next selection on the CD.
244 UNDERSTANDING YOUR INSTRUMENT PANEL AM/FM Button Supported Media (Disc Types) Press the button to select either AM or FM mode. The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Press this button while the CD is playing to activate Random Play.
UNDERSTANDING YOUR INSTRUMENT PANEL 245 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name, and will assign a number instead. With a maximum number of files, exceeding 20 folders will result in this display. With 200 files, exceeding 50 folders will result in this display.
246 UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 24, 22.05, 16 Playback of MP3 Files Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 When a medium containing MP3 data is loaded, the radio checks all files on the medium.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 Operation Instructions - Auxiliary Mode Uconnect® 130 WITH SATELLITE RADIO The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player, or iPOD®, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the DISC/AUX button will change the mode to auxiliary device if the AUX jack is connected.
248 UNDERSTANDING YOUR INSTRUMENT PANEL will remain tuned to the new station until you make another selection. Holding either button will bypass Push the ON/VOLUME control knob to turn on the stations without stopping, until you release it. radio. Push the ON/VOLUME control knob a second time to turn off the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 249 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes Press this button to operate the Uconnect® Phone feature will begin to blink. (if equipped). Refer to “Uconnect® Phone” in “Understanding The Features If Your Vehicle”. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL conIf your vehicle is not equipped with or this feature is not trol knob to save time change.
250 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL Press the INFO button for an RDS station (one with call control knob to the right or left to increase or decrease the letters displayed). The radio will return a Radio Text mid-range tones. message broadcast from an FM station (FM mode only). Push the rotary TUNE/SCROLL control knob a third RW/FF time and TREBLE will display.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
252 UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather 16-Digit Character Display Soft Soft Rck Soft R&B Sports Talk Top 40 Weather SETUP Button Pressing the SETUP button allows you to select between the following items: • Set Clock — Pressing the SELECT button will allow you to set the clock. Adjust the hours by turning the TUNE/SCROLL control knob. After adjusting the hours, press the TUNE/SCROLL control knob to set the minutes.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 SET/RND Button — To Set the Pushbutton Memory The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. When you are receiving a station that you wish to commit to pushbutton memory, press the SET/RND button. The symbol SET 1 will now show in the display window. Select the button (1–6) you wish to lock onto this station and press and release that button.
254 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and • The ignition switch must be in the ON or ACC position seconds. Play will begin at the start of track 1. to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 255 CAUTION! (Continued) • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player. EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. SEEK Button Press the right SEEK button for the next selection on the CD.
256 UNDERSTANDING YOUR INSTRUMENT PANEL AM/FM Button Supported Media (Disc Types) Press the button to select either AM or FM mode. The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Press this button while the CD is playing to activate Random Play.
UNDERSTANDING YOUR INSTRUMENT PANEL 257 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name, and will assign a number instead. With a maximum number of files, exceeding 20 folders will result in this display. With 200 files, exceeding 50 folders will result in this display.
258 UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 24, 22.05, 16 Playback of MP3 Files Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 When a medium containing MP3 data is loaded, the radio checks all files on the medium.
UNDERSTANDING YOUR INSTRUMENT PANEL 259 LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
260 UNDERSTANDING YOUR INSTRUMENT PANEL information, call the toll-free number 888-539-7474, or visit the Sirius web site at www.sirius.com, or at Satellite radio uses direct satellite-to-receiver broadcastwww.siriuscanada.ca for Canadian residents. ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Electronic Serial Number/Sirius Identification Radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 261 selected. Press the TUNE/SCROLL control knob and the Reception Quality Sirius ID number will display. The Sirius ID number Satellite reception may be interrupted due to one of the display will time out in two minutes. Press any button on following reasons: the radio to exit this screen. • The vehicle is parked in an underground parking Selecting Uconnect® (Satellite) Mode structure or under a physical obstacle. Press the SAT button until ⬙SAT⬙ appears in the display.
262 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Uconnect® (Satellite) Mode INFO Button NOTE: The ignition switch must be in the ON/RUN or Pressing the INFO button will cycle the display information between Artist, Song Title, and Composer (if availACC position to operate the radio. able).
UNDERSTANDING YOUR INSTRUMENT PANEL 263 MUSIC TYPE Button SETUP Button Pressing this button once will turn on the Music Type mode Pressing the SETUP button allows you to select the for five seconds. Pressing the MUSIC TYPE button or following items: turning the TUNE/SCROLL control knob within five sec- • Display Sirius ID number — Press the AUDIO/ onds will allow the program format type to be selected. SELECT button to display the Sirius ID number.
264 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second channel to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into pushbutton memory. The channels stored in SET 2 memory can be selected by pressing the pushbutton twice.
UNDERSTANDING YOUR INSTRUMENT PANEL 265 Once the audio device is connected and synchronized to Use the connection cable to connect an iPod® or external the vehicle’s iPod®/USB/MP3 control system (iPod® or USB device to the vehicle’s USB connector port which is external USB device may take a few minutes to connect), the audio device starts charging and is ready for use by located in the center of the instrument panel below the pressing radio switches, as described below. climate controls.
266 UNDERSTANDING YOUR INSTRUMENT PANEL • The audio device can be controlled using the radio mode. In Play mode, the following buttons on the radio buttons to Play, Browse, and List the iPod® contents. faceplate may be used to control the iPod® or external USB device and display data: • The audio device battery charges when plugged into the USB/AUX connector (if supported by the specific • Use the TUNE control knob to select the next or previous track.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 • A single press backward << RW or forward FF>> will • Press the SCAN button to use iPod®/USB/MP3 dejump backward or forward respectively, for five seconds. vice scan mode, which will play the first 10 seconds of each track in the current list and then forward to the • Use the << SEEK and SEEK>> buttons to jump to the next song. To stop SCAN mode and start playing the previous or next track.
268 UNDERSTANDING YOUR INSTRUMENT PANEL List Or Browse Mode During Play mode, pressing any of the buttons described below, will bring up List mode. List mode enables scrolling through the list of menus and tracks on the audio device. • TUNE control knob: The TUNE control knob functions in a similar manner as the scroll wheel on the audio device or external USB device.
UNDERSTANDING YOUR INSTRUMENT PANEL 269 • To exit List mode without selecting a track, press the same PRESET button again to go back to Play mode. • LIST button: The LIST button will display the top level menu of the iPod® or external USB device. Turn the TUNE control knob to list the top-menu item to be selected and press the TUNE control knob. This will display the next sub-menu list item on the audio device, then follow the same steps to go to the desired track in that list.
270 UNDERSTANDING YOUR INSTRUMENT PANEL Bluetooth Streaming Audio (BTSA) Selecting Different Audio Device Music can be streamed from your cellular phone to the 1. Press PHONE button to begin. Uconnect® phone system. 2. After the ⬙Ready⬙ prompt and the following beep, say ⬙Setup⬙, then ⬙Select Audio Devices⬙. Controlling BTSA Using Radio Buttons To get into the BTSA mode, press either “AUX” button on 3. Say the name of the audio device or ask the Uconnect® phone system to list audio devices.
UNDERSTANDING YOUR INSTRUMENT PANEL 271 STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The right-hand rocker switch has a pushbutton in the center, and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume. Pressing the bottom of the rocker switch will decrease the volume. Pressing the center button changes the operation of the radio from AM to FM, or to CD mode, depending on which radio is in the vehicle.
272 UNDERSTANDING YOUR INSTRUMENT PANEL Radio Operation CD/DVD DISC MAINTENANCE Pressing the top of the switch will SEEK up for the next To keep a CD/DVD in good condition, take the following listenable station, and pressing the bottom of the switch precautions: will SEEK down for the next listenable station. 1. Handle the disc by its edge; avoid touching the surface. The button located in the center of the left-hand switch 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 273 NOTE: If you experience difficulty in playing a particular disc, it may be damaged (i.e., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service. CLIMATE CONTROLS The air conditioning and heating system is designed to make you comfortable in all types of weather.
274 UNDERSTANDING YOUR INSTRUMENT PANEL Blower Control Rotate this control to regulate the amount of air forced through the ventilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position. There are four blower speeds. NOTE: For vehicles equipped with Remote Start, the climate controls will not function during Remote Start operation if the blower control is left in the “O” (Off) position.
UNDERSTANDING YOUR INSTRUMENT PANEL 275 • Panel • Floor Air is directed through the outlets in the instruAir is directed through the floor outlets with a ment panel. These outlets can be adjusted to direct small amount flowing through the defrost and airflow. side window demist outlets. NOTE: The center instrument panel outlets can be aimed • Mix so that they are directed toward the rear seat passengers Air is directed through the floor, defrost, and side for maximum airflow to the rear.
276 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The air conditioning compressor operates in Mix, • The use of the Recirculation mode in cold or damp weather will cause windows to fog on the inside, Defrost, or a blend of these modes, even if the Air because of moisture buildup inside the vehicle. Select Conditioning (A/C) button is not pressed. This dehuthe outside air position for maximum defogging. midifies the air to help dry the windshield. To improve fuel economy, use these modes only when necessary.
UNDERSTANDING YOUR INSTRUMENT PANEL 277 Air Conditioning Control Automatic Temperature Control (ATC) — Press this button to engage the Air Con- If Equipped ditioning. A light will illuminate when the Air Conditioning system is engaged. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red area indicates warmer temperatures. NOTE: The air conditioning compressor will not engage until the engine has been running for about 10 seconds.
278 UNDERSTANDING YOUR INSTRUMENT PANEL 72°F (22°C) is the recommended setting for maximum 1. Turn the Mode Control knob (on the right) and the comfort for the average person; however, this may vary. Blower Control knob (on the left) to AUTO NOTE: NOTE: The AUTO position performs best for front seat • The temperature setting can be adjusted at anytime occupants only. without affecting automatic operation. Operation of the system is quite simple. 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 279 • While operating in AUTO, the system will not automatically sense the presence of fog, mist or ice on the windshield. The defrost mode must be manually selected to clear the windshield and side glass. Manual Operation This system offers a full complement of manual override features, which consist of Blower Preferred Automatic, Mode Preferred Automatic, or Blower and Mode Preferred Automatic.
280 UNDERSTANDING YOUR INSTRUMENT PANEL
UNDERSTANDING YOUR INSTRUMENT PANEL 281 The operator can override the AUTO mode setting to • Floor change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and • Panel side window demist outlets. Air is directed through the outlets in the instru- • Mix ment panel. These outlets can be adjusted to direct Air is directed through the floor, defrost, and side airflow.
282 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioner Control NOTE: Press this button to turn on the air • When the ignition switch is turned to the LOCK conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is • In cold weather, use of the Recirculation mode may turned on, cool dehumidified air will lead to excessive window fogging.
UNDERSTANDING YOUR INSTRUMENT PANEL 283 • Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation button. However, under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions are present, and the Recirculation button is pressed, the indicator will flash and then turn off. This tells you that you are unable to go into Recirculation Mode at this time.
284 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Mix mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem, increase blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather.
UNDERSTANDING YOUR INSTRUMENT PANEL 285 Control Setting Suggestions for Various Weather Conditions 4
STARTING AND OPERATING CONTENTS 䡵 STARTING PROCEDURES . . . . . . . . . . . . . . . .292 䡵 AUTOMATIC TRANSMISSION . . . . . . . . . . . . .296 ▫ Automatic Transmission . . . . . . . . . . . . . . . .292 ▫ Key Ignition Park Interlock. . . . . . . . . . . . . . .298 ▫ Normal Starting. . . . . . . . . . . . . . . . . . . . . . .293 ▫ Brake/Transmission Shift Interlock System . . .298 ▫ Extreme Cold Weather (Below –20°F Or −29°C) . . . . . . . . . . . . . . . .
288 STARTING AND OPERATING 䡵 AUTOSTICK® . . . . . . . . . . . . . . . . . . . . . . . . .314 䡵 ELECTRONIC BRAKE CONTROL SYSTEM . . . .325 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .314 ▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . .325 䡵 DRIVING ON SLIPPERY SURFACES . . . . . . . . .316 ▫ Traction Control System (TCS) . . . . . . . . . . . .325 ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . . . . .316 ▫ Brake Assist System (BAS) . . . . . . . . . . . . . . .
STARTING AND OPERATING 289 䡵 TIRES — GENERAL INFORMATION. . . . . . . . .341 ▫ Tire Spinning . . . . . . . . . . . . . . . . . . . . . . . .348 ▫ Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . .341 ▫ Tread Wear Indicators . . . . . . . . . . . . . . . . . .349 ▫ Tire Inflation Pressures . . . . . . . . . . . . . . . . .342 ▫ Life Of Tire . . . . . . . . . . . . . . . . . . . . . . . . .349 ▫ Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . .344 ▫ Replacement Tires . . . . . .
290 STARTING AND OPERATING ▫ E-85 Usage In Non-Flex Fuel Vehicles . . . . . . .364 ▫ Cruising Range . . . . . . . . . . . . . . . . . . . . . . .369 ▫ MMT In Gasoline . . . . . . . . . . . . . . . . . . . . .364 ▫ Replacement Parts . . . . . . . . . . . . . . . . . . . .370 ▫ Materials Added To Fuel . . . . . . . . . . . . . . . .365 ▫ Maintenance . . . . . . . . . . . . . . . . . . . . . . . .370 ▫ Fuel System Cautions. . . . . . . . . . . . . . . . . . .365 䡵 ADDING FUEL . . . . . . . . . . . . . .
STARTING AND OPERATING 291 䡵 TRAILER TOWING . . . . . . . . . . . . . . . . . . . . .374 ▫ Towing Requirements . . . . . . . . . . . . . . . . . .380 ▫ Common Towing Definitions . . . . . . . . . . . . .375 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . .384 ▫ Trailer Hitch Classification . . . . . . . . . . . . . . .377 䡵 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) . . . . . . . . . . . .386 ▫ Trailer Towing Weights (Maximum Trailer Weight Ratings) . . . . . . . . .
292 STARTING AND OPERATING STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. • Do not leave the key fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle.
STARTING AND OPERATING 293 CAUTION! (Continued) • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Before shifting into any gear, make sure your foot is firmly on the brake pedal. engine fails to start within 10 seconds, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedure.
294 STARTING AND OPERATING If Engine Fails To Start WARNING! • Never pour fuel or other flammable liquid into the throttle body air inlet opening in an attempt to start the vehicle. This could result in flash fire causing serious personal injury. • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way.
STARTING AND OPERATING 295 it may be flooded. To clear any excess fuel, push the accelerator pedal all the way to the floor and hold it. Then, turn the ignition switch to the START position and To prevent damage to the starter, do not crank the release it as soon as the starter engages. The starter motor engine for more than 15 seconds at a time. Wait 10 to will disengage automatically in 10 seconds. Once this 15 seconds before trying again.
296 STARTING AND OPERATING ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms the engine, and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded, three-wire extension cord. The engine block heater must be plugged in at least one hour to have an adequate warning effect on the engine.
STARTING AND OPERATING 297 WARNING! WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and your foot is firmly pressing on the brake pedal.
298 STARTING AND OPERATING out of PARK, the ignition switch must be turned to the ON/RUN position (engine running or not) and the brake This vehicle is equipped with a Key Ignition Park Interpedal must be pressed. lock which requires the shift lever to be placed in PARK before the ignition switch can be turned to the LOCK/ Four-Speed Automatic Transmission — OFF position.
STARTING AND OPERATING 299 Only shift from DRIVE to PARK or REVERSE when the When parking on a level surface, you may place the shift accelerator pedal is released and the vehicle is stopped. lever in PARK first, and then apply the parking brake. Be sure to keep your foot on the brake pedal when When parking on a hill, apply the parking brake before moving the shift lever between these gears.
300 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Your vehicle could move and injure you and others if it is not completely in PARK. Check by trying to move the shift lever out of PARK with the brake pedal released. Make sure the transmission is in PARK before leaving the vehicle. • It is dangerous to shift out of PARK or NEUTRAL if the engine speed is higher than idle speed.
STARTING AND OPERATING 301 WARNING! (Continued) • Do not leave the ignition key in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle. CAUTION! • Before moving the shift lever out of PARK, you must turn the ignition switch from the OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result.
302 STARTING AND OPERATING NEUTRAL CAUTION! (Continued) Use this range when the vehicle is standing for prolonged periods with the engine running. The engine may be started in this range. Apply the parking brake and shift the transmission into PARK if you must leave the vehicle. WARNING! severe transmission damage. Refer to “Recreational Towing” in “Starting And Operating” and “Towing A Disabled Vehicle” in “What To Do In Emergencies” for further information.
STARTING AND OPERATING 303 these conditions, using the ⬙3⬙ range will improve perfor- DRIVE 3 mance and extend transmission life by reducing exces- This range eliminates shifts into fourth gear. The transsive shifting and heat buildup. mission will operate normally in first and second gear. If the transmission temperature exceeds normal operating Shifts into third may be delayed to provide second gear limits, the powertrain controller will modify the DRIVE operation at higher speeds.
304 STARTING AND OPERATING Transmission Limp Home Mode 3. Turn the ignition switch to the LOCK/OFF position. Transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, Transmission Limp Home Mode is activated. In this mode, the transmission remains in third gear regardless of which forward gear is selected. PARK, REVERSE, and NEUTRAL will continue to operate. The Malfunction Indicator Light (MIL) may be illuminated.
STARTING AND OPERATING 305 Overdrive Operation Torque Converter Clutch The automatic transmission includes an electronically controlled Overdrive (fourth gear). The transmission will automatically shift into Overdrive if the following conditions are present: • • • • • A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automatically at calibrated speeds.
306 STARTING AND OPERATING Only shift from DRIVE to PARK or REVERSE when the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when The shift lever position display (located in the instrument moving the shift lever between these gears. cluster) indicates the transmission gear range.
STARTING AND OPERATING 307 Gear Ranges DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range. NOTE: After selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold. PARK Shift Lever This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while the vehicle is in motion.
308 STARTING AND OPERATING When parking on a hill, apply the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. WARNING! (Continued) • Never use the PARK position as a substitute for the parking brake.
STARTING AND OPERATING 309 WARNING! (Continued) CAUTION! • When leaving the vehicle, always remove the ignition key from the ignition and lock your vehicle. Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever.
310 STARTING AND OPERATING The following indicators should be used to ensure that NEUTRAL you have engaged the shift lever into the PARK position: Use this range when the vehicle is standing for prolonged • When shifting into PARK, firmly move the shift lever periods with the engine running. The engine may be all the way forward and to the left until it stops and is started in this range. Apply the parking brake and shift fully seated. the transmission into PARK if you must leave the vehicle.
STARTING AND OPERATING 311 CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can cause severe transmission damage. Refer to “Recreational Towing” in “Starting And Operating” and “Towing A Disabled Vehicle” in “What To Do In Emergencies” for further information. DRIVE This range should be used for most city and highway driving. It provides the smoothest upshifts and downshifts, and the best fuel economy.
312 STARTING AND OPERATING Transmission Limp Home Mode 3. Turn the ignition switch to the LOCK/OFF position. Transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, Transmission Limp Home Mode is activated. In this mode, the transmission remains in third gear regardless of which forward gear is selected. PARK, REVERSE, and NEUTRAL will continue to operate. The Malfunction Indicator Light (MIL) may be illuminated.
STARTING AND OPERATING 313 Overdrive Operation Torque Converter Clutch The automatic transmission includes an electronically controlled Overdrive (sixth gear). The transmission will automatically shift into Overdrive if the following conditions are present: • • • • • A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automatically at calibrated speeds.
314 STARTING AND OPERATING AUTOSTICK® In AutoStick® mode, the transmission will shift up or down when the driver moves the shift lever to the right (+) or left (-), unless an engine lugging or overspeed condition would result. It will remain in the selected gear until another upshift or downshift is chosen, except as described below. AutoStick® is a driver-interactive transmission feature providing manual shift control, giving you more control of the vehicle.
STARTING AND OPERATING 315 • If a requested downshift would cause the engine to To disengage AutoStick® mode, return the shift lever to the over-speed, that shift will not occur. DRIVE position. You can shift in or out of the AutoStick® position at any time without taking your foot off the • Avoid using speed control when AutoStick® is engaged. accelerator pedal. • Transmission shifting will be more noticeable when AutoStick® is engaged.
316 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Traction Acceleration When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is hydroplaning and may cause partial or complete loss of vehicle control and stopping ability.
STARTING AND OPERATING 317 DRIVING THROUGH WATER Shallow Standing Water Driving through water more than a few inches/centi- Although your vehicle is capable of driving through meters deep will require extra caution to ensure safety shallow standing water, consider the following Caution and prevent damage to your vehicle. and Warning before doing so. Flowing/Rising Water WARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off).
318 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water. Do not continue to operate the vehicle if any fluid appears contaminated, as this may result in further damage.
STARTING AND OPERATING 319 POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. This is due to the cold, thick fluid in the steering system. This noise should be considered normal, and it does not in any way damage the steering system.
320 STARTING AND OPERATING The parking brake lever is located in the center console. Before leaving the vehicle, make sure that the parking To apply the parking brake, pull the lever up as firmly as brake is fully applied. Also, be certain to leave the possible. To release the parking brake, pull the lever up slightly, press the center button, then lower the lever transmission in PARK. completely.
STARTING AND OPERATING 321 When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. Apply the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK. The parking brake should always be applied whenever the driver is not in the vehicle.
322 STARTING AND OPERATING WARNING! (Continued) • Do not leave the key fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle. CAUTION! If the “Brake Warning Light” remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately.
STARTING AND OPERATING 323 WARNING! (Continued) • The capabilities of an ABS-equipped vehicle must never be exploited in a reckless or dangerous manner, which could jeopardize the user’s safety or the safety of others. The “Anti-Lock Brake Warning Light” monitors the Anti-Lock Brake System. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds.
324 STARTING AND OPERATING ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can include ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops.
STARTING AND OPERATING 325 ELECTRONIC BRAKE CONTROL SYSTEM Your vehicle may be equipped with an optional advanced electronic brake control system that includes Anti-Lock Brake System (ABS), Traction Control System (TCS), Brake Assist System (BAS), and Electronic Stability Control (ESC). All systems work together to enhance vehicle stability and control in various driving conditions and are commonly referred to as ESC.
326 STARTING AND OPERATING stability. A feature of the TCS system functions similar to pressure during the stopping sequence. Do not reduce a limited slip differential and controls the wheel spin brake pedal pressure unless braking is no longer desired. across a driven axle. If one wheel on a driven axle is Once the brake pedal is released, the BAS is deactivated. spinning faster than the other, the system will apply the brake of the spinning wheel.
STARTING AND OPERATING 327 Electronic Stability Control (ESC) This system enhances directional control and stability of the vehicle under various driving conditions. ESC corrects for over/under steering of the vehicle by applying the brake of the appropriate wheel to assist in counteracting the over/under steer condition. Engine power may also be reduced to help the vehicle maintain the desired path.
328 STARTING AND OPERATING function normally, with the exception of engine power reduction. This mode is intended to be used if the vehicle All ESC equipped vehicles can choose the following ESC is in deep snow, sand, or gravel conditions and more operating modes: wheel spin than ESC would normally allow is required to ESC On gain traction. ESC Operating Modes This is the normal operating mode for ESC. Whenever the vehicle is started the ESC system will be in this mode.
STARTING AND OPERATING 329 To turn ESC on again, momentarily press the “ESC Off” NOTE: To improve the vehicle’s traction when driving switch. This will restore the normal “ESC On” mode of with snow chains, or starting off in deep snow, sand or operation. gravel, it may be desirable to switch to the “Partial Off” mode by pressing the “ESC Off” switch.
330 STARTING AND OPERATING ESC Activation/Malfunction Indicator Light And ESC OFF Indicator Light The “ESC Activation/Malfunction Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON position. It should go out with the engine running. If the “ESC Activation/Malfunction Indicator Light” comes on continuously with the engine running, a malfunction has been detected in the ESC system.
STARTING AND OPERATING 331 NOTE: TIRE SAFETY INFORMATION • The “ESC Activation/Malfunction Indicator Light” Tire Markings and the “ESC OFF Indicator Light” come on momentarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESC system will be ON even if it was turned off previously. • The ESC system will make buzzing or clicking sounds when it is active.
332 STARTING AND OPERATING • Temporary spare tires are spares designed for temporary emergency use only. Temporary high pressure • P (Passenger) - Metric tire sizing is based on U.S. compact spare tires have the letter “T” or “S” molded design standards. P-Metric tires have the letter “P” into the sidewall preceding the size designation. molded into the sidewall preceding the size designaExample: T145/80D18 103M. tion. Example: P215/65R15 95H. • High flotation tire sizing is based on U.S.
STARTING AND OPERATING 333 Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T or S = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%) — Ratio of section height to section width of tire 10.
334 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
STARTING AND OPERATING 335 Look for the TIN on the outboard side of black sidewall Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, tires as mounted on the vehicle. If the TIN is not found on however, the date code may only be on one side. Tires the outboard side, then you will find it on the inboard with white sidewalls will have the full TIN, including the side of the tire. date code, located on the white sidewall side of the tire.
336 STARTING AND OPERATING Tire Terminology And Definitions Term B-Pillar Cold Tire Inflation Pressure Maximum Inflation Pressure Recommended Cold Tire Inflation Pressure Tire Placard Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
STARTING AND OPERATING 337 Tire Loading And Tire Pressure Tire And Loading Information Placard Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
338 STARTING AND OPERATING The combined weight of occupants, cargo/luggage and trailer tongue weight (if applicable) should never exceed The vehicle maximum load on the tire must not exceed the weight referenced here. the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you Steps For Determining Correct Load Limit adhere to the loading conditions, tire size, and cold tire 1.
STARTING AND OPERATING 339 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • The following table shows examples on how to calcu“XXX” amount equals 1,400 lbs (635 kg) and there will late total load, cargo/luggage, and towing capacities be five 150 lb (68 kg) passengers in your vehicle, the of your vehicle with varying seating configurations amount of available cargo and luggage load capacity and number and size of occupants.
340 STARTING AND OPERATING
STARTING AND OPERATING 341 WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
342 STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. stability of the vehicle and can produce a feeling of sluggish response or over responsiveness in the steering. Unequal tire pressures can cause erratic and unpredictable steering response.
STARTING AND OPERATING 343 CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter.
344 STARTING AND OPERATING Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires on speeds, maintaining correct tire inflation pressure is very your vehicle will cause your vehicle to handle poorly. important.
STARTING AND OPERATING 345 the tire sidewall. Use all season tires only in sets of four; If you need snow tires, select tires equivalent in size and failure to do so may adversely affect the safety and type to the original equipment tires. Use snow tires only in sets of four; failure to do so may adversely affect the handling of your vehicle. safety and handling of your vehicle.
346 STARTING AND OPERATING Spare Tire Matching Original Equipped Tire And Wheel – If Equipped CAUTION! Your vehicle may be equipped with a spare tire and Because of the reduced ground clearance, do not take wheel equivalent in look and function to the original your vehicle through an automatic car wash with a equipment tire and wheel found on the front or rear axle compact, full size or limited-use temporary spare of your vehicle. This spare tire may be used in the tire installed.
STARTING AND OPERATING 347 Since this tire has limited tread life the original equip- Full Size Spare – If Equipped ment tire should be repaired (or replaced) and reinstalled The full size spare is for temporary emergency use only. on your vehicle at the first opportunity. This tire may look like the original equipped tire on the Do not install a wheel cover or attempt to mount a front or rear axle of your vehicle, but it is not.
348 STARTING AND OPERATING tire affects vehicle handling. Since it is not the same as your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the first opportunity. WARNING! Limited-use spares are for emergency use only. Installation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel.
STARTING AND OPERATING 349 These indicators are molded into the bottom of the tread Tread wear indicators are in the original equipment tires grooves. They will appear as bands when the tread depth to help you in determining when your tires should be becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. replaced.
350 STARTING AND OPERATING WARNING! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death. “Tread Wear Indicators”). Refer to the “Tire and Loading Information” placard for the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original equipment tire sidewall.
STARTING AND OPERATING 351 WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death.
352 STARTING AND OPERATING The suggested rotation method is the “rearward cross” shown in the following diagram. This rotation pattern The tires on the front and rear of your vehicle operate at does not apply to some directional tires that must not be different loads and perform different steering, driving, reversed. and braking functions. For these reasons, they wear at unequal rates. TIRE ROTATION RECOMMENDATIONS These effects can be reduced by timely rotation of tires.
STARTING AND OPERATING 353 The TPM System will warn the driver of a low tire The Tire Pressure Monitor System (TPMS) will warn the pressure if the tire pressure falls below the low-pressure driver of a low tire pressure based on the vehicle recom- warning limit for any reason, including low temperature effects and natural pressure loss through the tire. mended cold placard pressure. TIRE PRESSURE MONITOR SYSTEM (TPMS) The tire pressure will vary with temperature by about 1 psi (7 kPa) for every 12°F (6.
354 STARTING AND OPERATING For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), a temperature drop to 20°F (-7°C) will decrease the tire pressure to approximately 23 psi (158 kPa). This tire pressure is sufficiently low enough to turn ON the “Tire Pressure Monitoring Telltale Light.
STARTING AND OPERATING 355 • The TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain • The TPMS is not intended to replace normal tire care correct tire pressure using an accurate tire pressure and maintenance, or to provide warning of a tire gauge, even if under-inflation has not reached the level failure or condition. to trigger illumination of the “Tire Pressure Monitor• The TPMS should not be used as a tire pressure gauge ing Telltale Light.
356 STARTING AND OPERATING Base System Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitor System (TPMS) uses wireless The “Tire Pressure Monitoring Telltale Light” will technology with wheel rim mounted electronic sensors to illuminate in the instrument cluster, a ⬙LOW monitor tire pressure levels.
STARTING AND OPERATING 357 Check TPMS Warning 4. Using tire chains on the vehicle. The “Tire Pressure Monitoring Telltale Light” will flash on and off for 75 seconds and then remain on solid when a system fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. The “Tire Pressure Monitoring Telltale Light” will turn off when the fault condition no longer exists.
358 STARTING AND OPERATING 3. After driving the vehicle for up to 20 minutes above 15 mph (24 km/h), the “Tire Pressure Monitoring Telltale Light” will flash on and off for 75 seconds and then remain on solid. Premium System – If Equipped 5.
STARTING AND OPERATING 359 • Various Tire Pressure Monitoring System Messages, placard pressure value. Once the system receives the which display in the Electronic Vehicle Information updated tire pressures, the system will automatically update, the graphic display in the EVIC will stop flashCenter (EVIC) ing, and the “Tire Pressure Monitoring Telltale Light” • Tire Pressure Monitoring Telltale Light will turn off.
360 STARTING AND OPERATING If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the “Tire Pressure Monitoring Telltale Light” will no longer flash, and the ⬙CHECK TPM SYSTEM⬙ message will no longer display, and a pressure value will display in place of the dashes. A system fault can occur due to any of the following: 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors.
STARTING AND OPERATING 361 NOTE: 1. The compact spare tire (if so equipped) does not have a tire pressure monitoring sensor. Therefore, the TPMS will not monitor the pressure in the compact spare tire. 4.
362 STARTING AND OPERATING General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: FUEL REQUIREMENTS This engine is designed to meet all emissions regulations and provide excellent fuel economy and performance when using high-quality unleaded “regular” gasoline • This device may not cause harmful interference. having an octane rating of 87.
STARTING AND OPERATING 363 Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the Worldwide Fuel Charter, WWFC) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufacturer recommends the use of gasolines that meet the WWFC specifications if they are available. Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline.
364 STARTING AND OPERATING • disconnect and reconnect the battery to reset the engine controller memory Non-FFV vehicles are compatible with gasoline containing 10% ethanol (E10). Gasoline with higher ethanol More extensive repairs will be required for prolonged content may void the vehicle’s warranty. exposure to E-85 fuel.
STARTING AND OPERATING 365 Materials Added To Fuel CAUTION! (Continued) All gasoline sold in the United States is required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefore, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law.
366 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
STARTING AND OPERATING 367 the other sections of this manual for information on features that are common between Flexible Fuel and gasoline-only powered vehicles. CAUTION! Only vehicles with the E-85 fuel filler door label can operate on E-85.
368 STARTING AND OPERATING For best results, a refueling pattern that avoids alternating E-85 is a mixture of approximately 85% fuel ethanol and between E-85 and unleaded gasoline is recommended. When you do switch fuel types it is recommended that: 15% unleaded gasoline. Ethanol Fuel (E-85) WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury.
STARTING AND OPERATING 369 • Some additives used in regular gasoline are not fully compatible with E-85 and may form deposits in your engine. To eliminate driveability issues that may be caused by these deposits, a supplemental gasoline additive, such as MOPAR® Injector Cleanup or Techron may be used. Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles FFV vehicles operated on E-85 require specially formulated engine oils.
370 STARTING AND OPERATING Replacement Parts ADDING FUEL Many components in your Flexible Fuel Vehicle (FFV) are designed to be compatible with ethanol. Always be sure that your vehicle is serviced with correct ethanol compatible parts. Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door, on the left rear quarter panel of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle.
STARTING AND OPERATING 371 After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door. This keeps the gas cap suspended away from and protects the vehicle’s surface. CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap may cause the “Malfunction Indicator Light (MIL)” to turn on.
372 STARTING AND OPERATING WARNING! (Continued) Loose Filler Cap Message If the vehicles diagnostic system determines that the fuel filler cap in loose, improperly installed, or damaged, a “gASCAP” message will be displayed in the instrument cluster. Tighten the gas cap until a “clicking” sound is heard. This is an indication that the gas cap is properly tightened. Press the trip odometer reset button to turn off the message.
STARTING AND OPERATING 373 VEHICLE LOADING Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, and cargo. The total load Your vehicle has a Vehicle Certification Label affixed to must be limited so that you do not exceed the GVWR. the drivers side “B” Pillar or the rear of the driver’s door.
374 STARTING AND OPERATING Overloading Loading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and the front and rear GAWR. To load your vehicle properly, first figure out its empty weight, axle-by-axle and side-by-side. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items securely before driving.
STARTING AND OPERATING 375 To maintain warranty coverage, follow the requirements Gross Trailer Weight (GTW) and recommendations in this manual concerning ve- The GTW is the weight of the trailer plus the weight of all hicles used for trailer towing. cargo, consumables and equipment (permanent or temporary) loaded in or on the trailer in its ⬙loaded and Common Towing Definitions ready for operation⬙ condition.
376 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) Tongue Weight (TW) The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR. Refer to “Vehicle Loading/Vehicle Certification Label” in “Starting and Operating” for further information. The tongue weight is the downward force exerted on the hitch ball by the trailer.
STARTING AND OPERATING 377 Trailer Hitch Classification Trailer Hitch Classification Definitions The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Class I - Light Duty Max.
378 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission 2.4L/Auto 3.6L/Auto Max. Frontal Area Max. Gross Trailer Wt. (GTW) 1,000 lbs (450 kg) 11 sq.ft. (1.0 sq.m) (See Note 2) 22 sq.ft. (2.0 sq.m) 1,000 lbs (450 kg) Refer to local laws for maximum trailer towing speeds.
STARTING AND OPERATING 379 Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of the vehicle and trailer. Failure to load trailers heavier in front is the cause of many trailer collisions.
380 STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle. Refer to the “Tire and Loading Information” placard for the maximum combined weight of occupants and cargo for your vehicle.
STARTING AND OPERATING 381 WARNING! (Continued) WARNING! (Continued) • When hauling cargo or towing a trailer, do not overload your vehicle or trailer. Overloading can cause a loss of control, poor performance, or damage to brakes, axle, engine, transmission, steering, suspension, chassis structure, or tires. • Safety chains must always be used between your vehicle and trailer. Always connect the chains to the frame or hook retainers of the vehicle hitch.
382 STARTING AND OPERATING Towing Requirements – Tires Towing Requirements – Trailer Brakes • Do not attempt to tow a trailer while using a compact • Do not interconnect the hydraulic brake system or spare tire. vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible • Proper tire inflation pressures are essential to the safe personal injury. and satisfactory operation of your vehicle.
STARTING AND OPERATING 383 CAUTION! WARNING! (Continued) If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. • Towing any trailer will increase your stopping distance. When towing you should allow for additional space between your vehicle and the vehicle in front of you.
384 STARTING AND OPERATING If you REGULARLY TOW a trailer for more than 45 minutes of continuous operation, then change the automatic Before setting out on a trip, practice turning, stopping, transmission fluid and filter as specified for “police, taxi, and backing up the trailer in an area located away from fleet, or frequent trailer towing.” Refer to the “Mainteheavy traffic. nance Schedule” for the proper maintenance intervals.
STARTING AND OPERATING 385 – Extended driving at high RPM should be avoided to prevent excess heat generation. A reduction in vehicle speed may be required to avoid extended driving at high RPM. Return to a higher gear or vehicle speed when grade and road conditions allow. Cooling System Electronic Speed Control – If Equipped When stopped for short periods of time, shift the transmission into NEUTRAL and increase engine idle speed. • Do not use in hilly terrain or with heavy loads.
386 STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF the Ground All Models Flat Tow NONE NOT ALLOWED Dolly Tow Front OK Rear NOT ALLOWED ALL OK On Trailer Recreational Towing – All Models 2. Drive the front wheels onto the tow dolly. Recreational towing is allowed ONLY if the front wheels 3. Firmly apply the parking brake. Place the transmisare OFF the ground.
STARTING AND OPERATING 387 CAUTION! • DO NOT flat tow this vehicle. Damage to the drivetrain will result. • Towing this vehicle in violation of the above requirements can cause severe transmission damage. Damage from improper towing is not covered under the New Vehicle Limited Warranty.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 HAZARD WARNING FLASHERS . . . . . . . . . . .390 ▫ Road Tire Installation . . . . . . . . . . . . . . . . . . .401 䡵 IF YOUR ENGINE OVERHEATS . . . . . . . . . . . .390 䡵 JUMP-STARTING . . . . . . . . . . . . . . . . . . . . . . .403 ▫ Engine Oil Overheating (2.4L Engine Only) — If Equipped. . . . . . . . . .391 䡵 JACKING AND TIRE CHANGING . . . . . . . . . .392 ▫ Jack Location . . . . . . . . . . . . . . . . . . . . . . . .392 ▫ Spare Tire Stowage . . . . . . . . . .
390 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning • On the highways — Slow down. flasher.
WHAT TO DO IN EMERGENCIES 391 NOTE: There are steps that you can take to slow down an impending overheat condition: • If your air conditioner (A/C) is on, turn it off. The A/C system adds heat to the engine cooling system and turning the A/C off can help remove this heat. • You can also turn the temperature control to maximum heat, the mode control to floor and the blower control to high.
392 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! (Continued) WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.
WHAT TO DO IN EMERGENCIES 393 Spare Tire Removal Preparations For Jacking Lift up the load floor cover and remove the hold down. 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. Turn on the Hazard Warning flashers. 3. Set the parking brake. Spare Tire And Jack Storage 4.
394 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle while the vehicle is being jacked.
WHAT TO DO IN EMERGENCIES 395 WARNING! (Continued) • If working on or near a roadway, be extremely careful of motor traffic. • To assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground. CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle.
396 WHAT TO DO IN EMERGENCIES CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 3. Removing Jack Handle From Jack 2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn while the wheel is still on the ground.
WHAT TO DO IN EMERGENCIES 397 3. There is a front and rear jacking location on each side of the vehicle. The plastic trim has been cut away to expose the jacking locations on the body.
398 WHAT TO DO IN EMERGENCIES 4. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged to the jacking location on the wheel to be changed. Do not raise the vehicle until you are sure the jack is securely engaged.
WHAT TO DO IN EMERGENCIES 399 5. Raise the vehicle by turning the jack screw to the right, using the swivel wrench. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum stability. 6. Remove the wheel nuts, and pull the wheel and wheel covers (where applicable) off the hub. Install the spare wheel and wheel nuts with the cone shaped end of the nuts toward the wheel. Lightly tighten the nuts.
400 WHAT TO DO IN EMERGENCIES WARNING! • To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. • To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. 7. Lower the vehicle by turning the jack screw to the left. 9. Remove the wheel blocks and lower the jack until it is free.
WHAT TO DO IN EMERGENCIES 401 Road Tire Installation Vehicles Equipped With Wheel Covers 1. Mount the road tire on the axle. 2. To ease the installation process for steel wheels with wheel covers, install two lug nuts on the mounting studs which are on each side of the valve stem. Install the lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts.
402 WHAT TO DO IN EMERGENCIES 3. Align the valve notch in the wheel cover with the 6. Finish tightening the lug nuts. Push down on the valve stem on the wheel. Install the cover by hand, wrench while at the end of the handle for increased snapping the cover over the two lug nuts. Do not use leverage. Tighten the lug nuts in a star pattern until each a hammer or excessive force to install the cover. nut has been tightened twice. The correct tightness of each lug nut is 100 ft/lbs (135 N·m).
WHAT TO DO IN EMERGENCIES 403 WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. JUMP-STARTING If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack.
404 WHAT TO DO IN EMERGENCIES WARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury. Preparations For Jump-Start The battery in your vehicle is located between the left front headlight assembly and the left front wheel splash shield. To allow jump-starting there are remote battery posts located on the left side of the engine compartment.
WHAT TO DO IN EMERGENCIES 405 WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured. • Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive.
406 WHAT TO DO IN EMERGENCIES 4. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. WARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1.
WHAT TO DO IN EMERGENCIES 407 WARNING! Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery. 9. Disconnect the positive (+) end of the jumper cable from the remote positive (+) post of the discharged vehicle. 10.
408 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved using a rocking motion. Turn the steering wheel right and left to clear the area around the front wheels. Then shift back and forth between DRIVE and REVERSE, while gently pressing the accelerator. Use the least amount of accelerator pedal pressure to maintain the rocking motion, without spinning the wheels, or racing the engine.
WHAT TO DO IN EMERGENCIES 409 WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck and do not let anyone near a spinning wheel, no matter what the speed. 3. Remove the rubber cupholder liner.
410 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a towing service. Towing Condition Flat Tow Wheel Lift Or Dolly Tow Wheels OFF the Ground NONE Rear Flatbed Front ALL Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for this purpose, following equipment manufacturer’s instructions. Use of safety chains is mandatory.
WHAT TO DO IN EMERGENCIES 411 If your vehicle’s battery is discharged, see ⬙Shift Lever The manufacturer recommends towing your vehicle with Override⬙ in ⬙What To Do In Emergencies⬙ for instruc- all four wheels OFF the ground using a flatbed. tions on shifting the automatic transmission out of PARK If flatbed equipment is not available, and the transmission for towing.
412 WHAT TO DO IN EMERGENCIES CAUTION! Towing faster than 25 mph (40 km/h) or farther than 15 mi (24 km) with front wheels on the ground can cause severe transmission damage. Such damage is not covered by the New Vehicle Limited Warranty. wheels on the ground) is not allowed, as transmission damage will occur. If rear towing is the only alternative, the front wheels must be placed on a towing dolly. Proper towing equipment is necessary to prevent damage to the vehicle.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 ENGINE COMPARTMENT — 2.4L . . . . . . . . . .415 䡵 MAINTENANCE PROCEDURES . . . . . . . . . . .420 䡵 ENGINE COMPARTMENT — 3.6L . . . . . . . . . .416 ▫ Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . .421 䡵 ONBOARD DIAGNOSTIC SYSTEM — OBD II . . .417 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . .424 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . .417 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . .
414 MAINTAINING YOUR VEHICLE ▫ Adding Washer Fluid . . . . . . . . . . . . . . . . . .431 䡵 BULB REPLACEMENT . . . . . . . . . . . . . . . . . .459 ▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . .431 ▫ Headlamp . . . . . . . . . . . . . . . . . . . . . . . . . .459 ▫ Cooling System . . . . . . . . . . . . . . . . . . . . . .434 ▫ Front Turn Signal . . . . . . . . . . . . . . . . . . . . .461 ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . .440 ▫ Front Fog Lamp . . . . . . . .
MAINTAINING YOUR VEHICLE 415 ENGINE COMPARTMENT — 2.
416 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 3.
MAINTAINING YOUR VEHICLE 417 ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
418 MAINTAINING YOUR VEHICLE the gas cap is properly tightened. Press the trip odometer “Reset” button to turn off the message. If the problem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the “Malfunction Indicator Light (MIL).” Resolving the problem will turn the MIL light off. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS Normally, the OBD II system will be ready.
MAINTAINING YOUR VEHICLE 419 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal • The MIL will flash for about 10 seconds and then vehicle operation you should have your vehicle serviced return to being fully illuminated until you turn OFF before going to the I/M station. The I/M station can fail the ignition or start the engine.
420 MAINTAINING YOUR VEHICLE available which include detailed service information for MAINTENANCE PROCEDURES your vehicle. Refer to these Service Manuals before The pages that follow contain the required maintenance attempting any procedure yourself. services determined by the engineers who designed your NOTE: Intentional tampering with emissions control vehicle.
MAINTAINING YOUR VEHICLE 421 CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
422 MAINTAINING YOUR VEHICLE CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Also, be sure the oil fill cap is replaced and tightened after adding oil. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to the “Maintenance Schedule” for further information.
MAINTAINING YOUR VEHICLE 423 CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New Vehicle Limited Warranty. Engine Oil Viscosity – 3.6L Engine SAE 5W-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on Engine Oil Viscosity – 2.
424 MAINTAINING YOUR VEHICLE Materials Added To Engine Oil Engine Oil Filter The manufacturer strongly recommends against the addition of any additives (other than leak detection dyes) to the engine oil. Engine oil is an engineered product and its performance may be impaired by supplemental additives. The engine oil filter should be replaced with a new filter at every engine oil change. Engine Oil Filter Selection This manufacturer’s engines have a full-flow type oil filter.
MAINTAINING YOUR VEHICLE 425 WARNING! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc.) removed. Failure to do so can result in serious personal injury.
426 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
MAINTAINING YOUR VEHICLE 427 Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components.
428 MAINTAINING YOUR VEHICLE The A/C Air Filter is located in the fresh air inlet behind R-134a Air Conditioning Refrigerant is a hydrofluoro- the glove box. Perform the following procedure to recarbon (HFC) that is endorsed by the Environmental place the filter: Protection Agency and is an ozone-saving product. How- 1. Open the glove box and remove all contents. ever, the manufacturer recommends that air conditioning service be performed by authorized dealer or other 2.
MAINTAINING YOUR VEHICLE 429 5. Disengage the two retaining tabs that secure the filter 7. Install the A/C Air Filter with the arrow on the filter cover to the HVAC housing and remove the cover. pointing toward the floor. When installing the filter cover, make sure the retaining tabs fully engage the cover. CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter. Failure to install the filter properly will result in the need to replace it more often. 8.
430 MAINTAINING YOUR VEHICLE Body Lubrication Windshield Wiper Blades Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubricated periodically with a lithium based grease, such as MOPAR® Spray White Lube to assure quiet, easy operation and to protect against rust and wear.
MAINTAINING YOUR VEHICLE 431 Adding Washer Fluid WARNING! The windshield washer and the rear window washer share the same fluid reservoir. The fluid reservoir is Commercially available windshield washer solvents located in the engine compartment. Be sure to check the are flammable. They could ignite and burn you. Care fluid level in the reservoir at regular intervals. Fill the must be exercised when filling or working around reservoir with windshield washer solvent (not radiator the washer solution.
432 MAINTAINING YOUR VEHICLE into the passenger compartment. In addition, have the exhaust system inspected each time the vehicle is raised for lubrication or oil change. Replace as required. WARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, refer to “Safety Tips/Exhaust Gas” in “Things To Know Before Starting Your Vehicle” for further information.
MAINTAINING YOUR VEHICLE 433 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter damverter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage. motion.
434 MAINTAINING YOUR VEHICLE Coolant Checks Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the LOCK position. The fan is temperature controlled and can start at anytime the ignition switch is in the ON position. • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator.
MAINTAINING YOUR VEHICLE 435 Cooling System – Drain, Flush, And Refill If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of the old engine coolant (antifreeze) solution. Refer to the “Maintenance Schedule” for the proper maintenance intervals.
436 MAINTAINING YOUR VEHICLE CAUTION! (Continued) • This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended. Please review these recommendations for using Organic Additive Technology (OAT) engine coolant (antifreeze). When adding engine coolant (antifreeze): • We recommend using MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology).
MAINTAINING YOUR VEHICLE 437 Please note that it is the owner’s responsibility to main- The cap should be inspected and cleaned if there is any tain the proper level of protection against freezing ac- accumulation of foreign material on the sealing surfaces. cording to the temperatures occurring in the area where the vehicle is operated. WARNING! NOTE: Mixing engine coolant (antifreeze) types is not recommended and can result in cooling system damage.
438 MAINTAINING YOUR VEHICLE Six-Cylinder Engines – the level of the engine coolant (antifreeze) in the pressurized coolant bottle should be Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check between the “COLD” and “FULL” range on the bottle with your local authorities to determine the disposal when the engine is cold. rules for your community.
MAINTAINING YOUR VEHICLE 439 • If frequent engine coolant (antifreeze) additions are required, the cooling system should be pressure tested NOTE: When the vehicle is stopped after a few miles/ for leaks. kilometers of operation, you may observe vapor coming from the front of the engine compartment.
440 MAINTAINING YOUR VEHICLE Master Cylinder – Brake Fluid Level Check Brake System In order to assure brake system performance, all brake Check the fluid level in the master cylinder immediately if system components should be inspected periodically. the brake system warning light indicates system failure. Refer to the “Maintenance Schedule” for the proper Check the fluid level in the master cylinder when permaintenance intervals. forming underhood services.
MAINTAINING YOUR VEHICLE 441 Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. WARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance.
442 MAINTAINING YOUR VEHICLE WARNING! (Continued) • Do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. Automatic Transmission Selection Of Lubricant NOTE: No chemical flushes should be used in any transmission; only the approved lubricant should be used.
MAINTAINING YOUR VEHICLE 443 Automatic Transmission Fluid (ATF) is an engineered product and its performance may be impaired by supplemental additives. Therefore, do not add any fluid additives to the transmission. The only exception to this policy is the use of special dyes for diagnosing fluid leaks. Avoid using transmission sealers as they may adversely affect seals. CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission components.
444 MAINTAINING YOUR VEHICLE 6. Remove the dipstick and determine if the fluid is hot or cold. Hot fluid is approximately 180° F (82° C), which is the normal operating temperature after the vehicle is driven at least 15 miles (24 km). Hot fluid cannot be held comfortably between the fingertips. Cold fluid is at a temperature of approximately 80° F (27° C). If the fluid level is low, add fluid through the dipstick tube to bring it to the proper level. Do not overfill.
MAINTAINING YOUR VEHICLE 445 CAUTION! (Continued) • Dirt and water in the transmission can cause serious damage. To prevent dirt and water from entering the transmission after checking or replenishing fluid, make sure that the dipstick cap is re-seated properly. Fluid And Filter Changes Refer to the “Service and Warranty Handbook” for the proper maintenance intervals. In addition, change the fluid and filter if the transmission is disassembled for any reason.
446 MAINTAINING YOUR VEHICLE The following maintenance recommendations will enable Washing you to obtain maximum benefit from the corrosion • Wash your vehicle regularly. Always wash your veresistance built into your vehicle. hicle in the shade using MOPAR® Car Wash, or a mild car wash soap, and rinse the panels completely with What Causes Corrosion? clear water.
MAINTAINING YOUR VEHICLE 447 CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder that will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. • If you detect any stone chips or scratches in the paint, touch them up immediately.
448 MAINTAINING YOUR VEHICLE Wheel And Wheel Trim Care Cleaning Headlights • All wheels and wheel trim, especially aluminum and Your vehicle is equipped with plastic headlights and fog chrome plated wheels, should be cleaned regularly lights (if equipped) that are lighter and less susceptible to stone breakage than glass headlights. with a mild soap and water to prevent corrosion.
MAINTAINING YOUR VEHICLE 449 Stain Repel Fabric Cleaning Procedure – If Equipped Interior Care Instrument Panel Cover Stain Repel seats may be cleaned in the following manner: The instrument panel cover has a low glare surface, which • Remove as much of the stain as possible by blotting minimizes reflections in the windshield. Do not use prowith a clean, dry towel. tectants or other products, which may cause undesirable reflections.
450 MAINTAINING YOUR VEHICLE Cleaning Leather Upholstery MOPAR® Total Clean or equivalent is specifically recommended for leather upholstery. Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOPAR® Total Clean or equivalent.
MAINTAINING YOUR VEHICLE 451 Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp rag. Replace the belts if they appear frayed or worn or if the buckles do not work properly.
452 MAINTAINING YOUR VEHICLE FUSES Integrated Power Module The Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini fuses. A label that identifies each component may be printed on the inside of the cover. Refer to the graphic below for FUSES/TIPM location.
MAINTAINING YOUR VEHICLE 453 2 Cartridge Fuse 40 Amp Green — 3 — 4 — 5 — 6 — Cavity 1 Mini Fuse — 20 Amp Yellow 10 Amp Red 10 Amp Red 20 Amp Yellow 10 Amp Red Description Cavity Power Top Module – If Equipped Brake Vacuum Pump 7 Cartridge Fuse — 8 — Center High Mounted Stop Light (CHMSL)/ Brake Switch Ignition Switch 9 10 40 Amp Green — 11 — 15 Amp Lt Blue 12 — 20 Amp Yellow Trailer Tow – If Equipped Power Mirror Switch/ Climate Controls Mini Fuse 30 Amp Green 30 Amp Green 20
454 MAINTAINING YOUR VEHICLE 13 Cartridge Fuse — 14 — 15 16 40 Amp Green — 17 — Cavity Mini Fuse 20 Amp Yellow 10 Amp Red — 15 Amp Lt. Blue 10 Amp Red Ignition/Cigar Lighter Instrument Panel 18 19 Cartridge Fuse 40 Amp Green — Radiator Fan Relay 20 — Sunroof – If Equipped Wireless Control Module (WCM)/ Clock/Steering Control Module (SCM) 21 — 22 — 23 — Description Cavity Mini Fuse — 20 Amp Yellow 15 Amp Lt. Blue 10 Amp Red 10 Amp Red 15 Amp Lt.
MAINTAINING YOUR VEHICLE 455 24 Cartridge Fuse — 25 — 26 — 27 — Cavity Mini Fuse 25 Amp Natural 10 Amp Red 15 Amp Lt.
456 MAINTAINING YOUR VEHICLE Cavity 32 33 34 Cartridge Fuse 30 Amp Pink — 30 Amp Pink Mini Fuse — 10 Amp Red — Description Cavity Auto Shutdown (ASD) Relay 1 Switch Bank/ Diagnostic Link Connector/ Powertrain Control Module (PCM) Anti-Lock Brakes (ABS) Module – If Equipped/Electronic Stability Control (ESC) Module – If Equipped 35 Cartridge Fuse 40 Amp Green Mini Fuse — 36 30 Amp Pink — 37 — 25 Amp Natural Description Anti-Lock Brakes (ABS) Module – If Equipped/Electronic Stability Contro
MAINTAINING YOUR VEHICLE 457 CAUTION! • When installing the Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
458 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS Exterior Bulbs Interior Bulbs Front Courtesy/Reading Lamp Center Courtesy/Reading Lamp Visor Vanity Lamp Glove Box Lamp Shift Indicator Lamp Rear Compartment (Trunk) Lamp Bulb Number 578/W5W 578/W5W A6220 A6220 IKLE14140 579 NOTE: For lighted switches, see your authorized dealer for replacement.
MAINTAINING YOUR VEHICLE 459 BULB REPLACEMENT Headlamp 1. Raise and prop open the hood. Locate the connector behind the headlamp. NOTE: It may be necessary to remove the air cleaner filter housing and position the totally integrated power module aside prior to replacing the low beam headlamp on the driver’s side of the vehicle. 2. Reach into engine compartment and from behind the lamp assembly and grasp the connector.
460 MAINTAINING YOUR VEHICLE 3. Rotate bulb and connector one-quarter turn and pull 4. Pull the bulb out of the socket and replace the bulb. outward from assembly. 5. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. 6. Reinsert the bulb and socket assembly and rotate clockwise one-quarter turn to secure.
MAINTAINING YOUR VEHICLE 461 Front Turn Signal 1. Raise and prop open the hood. 1. Rotate the bulb’s electrical connector one-quarter turn counterclockwise and remove it from the fog lamp housing. 2. Rotate the bulb’s electrical connector one-quarter turn 2. Remove the bulb from the connector socket and install counterclockwise and remove it from the headlamp the replacement bulb. housing. 3. Remove the bulb from the connector socket and install the replacement bulb. 4.
462 MAINTAINING YOUR VEHICLE NOTE: Placing a small flat head screwdriver or similar tool between the lamp outboard ball stud and plastic 1. Open the trunk and gently pull back the trunk liner grommet from inside the trunk can help to disengage the behind the tail lamp (requires removal of a push pin outboard edge of the tail lamp. holding the trunk trim in place near the tail lamp). 3. Grasp the tail lamp by both the outboard and inboard 2.
MAINTAINING YOUR VEHICLE 463 License Plate Lamp 1. Using a small screwdriver, press inward the locking tab on the side of the lamp assembly and pull down on the lamp assembly for removal. 2. Pull bulb from socket, replace, and reinstall the lamp assembly into place ensuring the locking tab is secure. 4. Twist and remove socket from lamp. 5. Remove bulb from socket and replace. 6. Reinstall the tail lamp, fasteners, and trunk liner.
464 MAINTAINING YOUR VEHICLE FLUID CAPACITIES U.S. Fuel (Approximate) All Engines — (Except 2.4L PZEV) 16.9 Gallons 2.4L PZEV (Partial Zero Emissions Vehicle) 18.5 Gallons Engine Oil With Filter 2.4L Engine (SAE 5W-20, API Certified) 4.5 Quarts 3.6L Engine (SAE 5W-20, API Certified) 6 Quarts Cooling System* 2.4L Engine (MOPAR® Antifreeze/Engine Coolant 7.7 Quarts 10 Year/150,000 Mile Formula or equivalent) 3.6L Engine (MOPAR® Antifreeze/Engine Coolant 11.
MAINTAINING YOUR VEHICLE 465 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant Engine Oil – 2.4L Engine Engine Oil – 3.6L Engine Engine Oil Filter Spark Plugs – 2.4L Engine except PZEV* Spark Plugs – 2.4L with PZEV* Fluid, Lubricant, or Genuine Part We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
466 MAINTAINING YOUR VEHICLE Component Fluid, Lubricant, or Genuine Part Spark Plugs – 3.6L Engine We recommend you use MOPAR® Spark Plugs (Gap 0.043 in [1.1 mm]). Fuel Selection 87 Octane * PZEV = Partial Zero Emission Vehicle Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part We recommend you ONLY use MOPAR® ATF+4® Automatic Transmission Fluid. Failure to use ATF+4® fluid may affect the function or performance of your transmission.
M A I N T E N A ▫ Maintenance Chart. . . . . . . . . . . . . . . . . . . . .470 N C E MAINTENANCE SCHEDULES CONTENTS 䡵 MAINTENANCE SCHEDULE . . . . . . . . . . . . .
M A I N T E N A N C E S C H E D U L E S 8 468 MAINTENANCE SCHEDULES your authorized dealer, the message can be reset by referYour vehicle is equipped with an automatic oil change ring to the steps described under “Electronic Vehicle Inforindicator system. The oil change indicator system will mation Center (EVIC)/Oil Change Required” in “Underremind you that it is time to take your vehicle in for standing Your Instrument Panel” for further information scheduled maintenance.
MAINTENANCE SCHEDULES 469 M Required Maintenance Intervals. Refer to the maintenance schedules on the following page for the required maintenance intervals. • • • • At Every Oil Change Interval As Indicated By Oil Change Indicator System: Change oil and filter. Rotate the tires. Rotate at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. Inspect battery and clean and tighten terminals as required. Inspect automatic transmission fluid if equipped with dipstick.
8 Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends, boot seals and replace if necessary. Inspect the brake linings, parking brake function. Additional Maintenance Replace engine air filter.
Replace cabin/air conditioning filter. Replace spark plugs (2.4L Engine). ** Replace spark plugs (2.4L PZEV Engine Only). ** Replace spark plugs (3.6L Engine). ** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first.
S C H E D U L E S 8 Change automatic transmission fluid and filter if using your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing. Change automatic transmission fluid and filter. Inspect and replace PCV valve if necessary.
MAINTENANCE SCHEDULES 473 M WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE . . . . . . . . . . . . . . . . . . .477 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . .479 ▫ Prepare For The Appointment. . . . . . . . . . . . .477 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . .479 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . .477 䡵 WARRANTY INFORMATION . . . . . . . . . . . . .480 ▫ Be Reasonable With Requests . .
476 IF YOU NEED CONSUMER ASSISTANCE 䡵 PUBLICATION ORDER FORMS . . . . . . . . . . . .482 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . .483 䡵 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES . . . . . . . . .483 ▫ Temperature Grades. . . . . . . . . . . . . . . . . . . .484 ▫ Treadwear. . . . . . . . . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 477 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment Be Reasonable With Requests If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with the service advisor and list the items in order of priority. At many authorized dealer, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it is advisable to make these arrangements when you call for an appointment.
478 IF YOU NEED CONSUMER ASSISTANCE service. The manufacturer’s authorized dealer have the • Authorized dealer name facilities, factory-trained technicians, special tools, and • Vehicle Identification Number (VIN) the latest information to ensure the vehicle is fixed • Vehicle delivery date and mileage correctly and in a timely manner. This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer service manager first. Most matters can be re- P.O.
IF YOU NEED CONSUMER ASSISTANCE 479 Mexico, D. F. Canadian residents with hearing difficulties that require assistance can use the special needs relay service offered by Bell Canada. For TTY teletypewriter users, dial 711 and for Voice callers, dial 1 800 855-0511 to connect with a Bell Relay Service operator.
480 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the manufacturer’s service contract. If you purchased a service contract that is not a manufacturer’s service contract, and you require service after the manufacturer’s New Vehicle Limited Warranty expires, please refer to the contract documents, and contact the person listed in those documents.
IF YOU NEED CONSUMER ASSISTANCE 481 To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– MOPAR® fluids, lubricants, parts, and accessories are available from an authorized dealer. They are recom- 9153), or go to http://www.safercar.gov; or write to: mended for your vehicle in order to help keep the vehicle Administrator, NHTSA, 1200 New Jersey Avenue, SE., West Building, Washington, D.C. 20590. You can also operating at its best.
482 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below. Visa, Mastercard, American Express, and Discover orders are accepted. If you prefer mailing your payment, please call for an order form. Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations.
IF YOU NEED CONSUMER ASSISTANCE 483 Call toll free at: Treadwear • 1–800–890–4038 (U.S.) The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100.
484 IF YOU NEED CONSUMER ASSISTANCE WARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. The grade C corresponds to a level of performance, which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel, than the minimum required by law.
INDEX 10
486 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . . . . .320 ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . . .322 Adding Engine Coolant (Antifreeze) . . . . . . . . . . . .436 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .370 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . .431 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . .365 Airbag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 487 Automatic Transmission . . . . . . . . . . . . . . . . . . . .296 Adding Fluid . . . . . . . . . . . . . . . . . . . . . . . . .443 Fluid and Filter Changes . . . . . . . . . . . . . . . . .445 Fluid Level Check . . . . . . . . . . . . . . . . . . . . . .443 Fluid Type . . . . . . . . . . . . . . . . . . . . . . . . . . .442 Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . . .299 Special Additives . . . . . . . . . . . . . . . . . . . . . . .442 Autostick . . . . . . . . . . . . . . .
488 INDEX Cellular Phone . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Certification Label. . . . . . . . . . . . . . . . . . . . . . . . .373 Chains, Tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . .351 Changing A Flat Tire . . . . . . . . . . . . . . . . . . . . . . .392 Chart, Tire Sizing . . . . . . . . . . . . . . . . . . . . . . . . .333 Check Engine Light (Malfunction Indicator Light) . .418 Checking Your Vehicle For Safety . . . . . . . . . . . . . . .98 Checks, Safety . . .
INDEX 489 Dipsticks Automatic Transmission . . . . . . . . . . . . . . . . . .443 Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . . .421 Disabled Vehicle Towing . . . . . . . . . . . . . . . . . . . .410 Disposal Antifreeze (Engine Coolant) . . . . . . . . . . . . . . .438 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Door Locks, Automatic . . . . . . . . . . . . . . . . . . . . . .34 Driving Through Flowing, Rising, or Shallow Standing Water . . . . . . . . . . . .
490 INDEX Emergency, In Case of Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .392 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . .403 Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .410 Emergency Trunk Release . . . . . . . . . . . . . . . . . . . .42 Emission Control System Maintenance . . . . . . . . . .418 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .415 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 491 Fabric Care. . . . . . . . . . . . Filler Location Fuel . . . . . . Filters Air Cleaner . . . . . . . . . Air Conditioning . . . . . Automatic Transmission Engine Oil . . . . . . . . . . Engine Oil Disposal . . . Flashers . . . . . . . . . . . . . . Hazard Warning . . . . . Turn Signal . . . . . . . . . Flash-To-Pass . . . . . . . . . . Flexible Fuel Vehicles Cruising Range . . . . . . Engine Oil . . . . . . . . . . Fuel Requirements . . . . Maintenance . . . . . . . . Replacement Parts . . . .
492 INDEX Filler Cap (Gas Cap) Filler Door (Gas Cap) Gasoline . . . . . . . . . Gauge . . . . . . . . . . . Light . . . . . . . . . . . Materials Added . . . Methanol . . . . . . . . Octane Rating . . . . . Requirements . . . . . Tank Capacity . . . . . Fuel, Flexible . . . . . . . . Fueling . . . . . . . . . . . . Fuel System Caution . . . Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 493 Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .459 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . .459 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .448 High Beam . . . . . . . . . . . . . . . . . . . . . . . . . . .166 High Beam/Low Beam Select Switch . . . . . . . . .166 On With Wipers . . . . . . . . . . . . . . . . . . . . . . . .174 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167 Replacing . . . . . . . . . . . . .
494 INDEX Jacking Instructions . Jack Location . . . . . Jack Operation . . . . Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .394 .392 .392 .403 Key-In Reminder . . . . . . . . . Keyless Entry System . . . . . . Keyless Entry System (Sedan) Key, Programming . . . . . . . . Key, Replacement . . . . . . . . . Keys . . . . . . . . .
INDEX 495 High Beam Indicator . . . . . . . . . . . . . . . . . . . .223 Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . .21 Instrument Cluster . . . . . . . . . . . . . . . . . . . . . .164 Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169 License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .463 Lights On Reminder . . . . . . . . . . . . . . . . . . . . .165 Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . .
496 INDEX Malfunction Indicator Light (Check Engine). . . . . . .221 Manual, Service . . . . . . . . . . . . . . . . . . . . . . . . . .482 Map/Reading Lights . . . . . . . . . . . . . . . . . . . . . . .169 Master Cylinder (Brakes) . . . . . . . . . . . . . . . . . . . .440 Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .363 Mini-Trip Computer . . . . . . . . . . . . . . . . . . . . . . .223 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 497 Identification Logo . . . . . . . . . . . . . . . . . . . . . .422 Materials Added to . . . . . . . . . . . . . . . . . . . . .424 Recommendation . . . . . . . . . . . . . . . . . . . . . . .422 Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . .423 Viscosity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .423 Oil Filter, Selection . . . . . . . . . . . . . . . . . . . . . . . .424 Oil Pressure Light . . . . . . . . . . . . . . . . . . . . . . . . .
498 INDEX Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . . . . . .344 Radiator Cap (Coolant Pressure Cap) . . . . . . . . . . .437 Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . . .273 Radio Remote Controls . . . . . . . . . . . . . . . . . . . . .271 Rear Cupholder . . . . . . . . . . . . . . . . . . . . . . . . . .197 Rear Seat, Folding . . . . . . . . . . . . . . . . . . . . . . . . .160 Rearview Mirrors . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 499 Satellite Radio Antenna . . . . . . . . . . . . . . . . . . . . .261 Schedule, Maintenance . . . . . . . . . . . . . . . . . . . . .468 Seat Belt Maintenance . . . . . . . . . . . . . . . . . . . . . .451 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . . . . .59 Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 Adjustable Shoulder Belt . . . . . . . . . . . . . . . . . .52 Adjustable Upper Shoulder Anchorage . . . . . . . .52 And Pregnant Women . . . . . . .
500 INDEX Side Window Demisters (Defrosters) . . . . . . . . . . Signals, Turn . . . . . . . . . . . . . . . . . . . . . . . . . . Snow Chains (Tire Chains) . . . . . . . . . . . . . . . . . Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . Spare Tire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Speed Control (Cruise Control). . . . . . . . . . . . . . Speedometer. . . . . . . . . . . . . . . . . . . . . . . . . . . Starting . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 501 Aging (Life of Tires) . . . . . . . . . Air Pressure . . . . . . . . . . . . . . Chains . . . . . . . . . . . . . . . . . . Changing . . . . . . . . . . . . . . . . Compact Spare . . . . . . . . . . . . General Information . . . . . . . . . High Speed . . . . . . . . . . . . . . . Inflation Pressures . . . . . . . . . . Jacking . . . . . . . . . . . . . . . . . . Life of Tires . . . . . . . . . . . . . . . Load Capacity . . . . . . . . . . . . .
502 INDEX Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .384 Trailer and Tongue Weight . . . . . . . . . . . . . . . .379 Trailer Towing Guide. . . . . . . . . . . . . . . . . . . . . . .378 Trailer Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .378 Transaxle Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Autostick . . . . . . . . . . . . . . . . . . . . . . . . . . . .314 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 503 Vehicle Storage . . . . . . . . . . . . . . . . . . . . . . . . . . .283 Vehicle Theft Alarm (Security Alarm) . . . . . . . . . . . .19 Viscosity, Engine Oil . . . . . . . . . . . . . . . . . . . . . . .423 Voice Recognition System (VR) . . . . . . . . . . . . . . . .142 Warning Lights (Instrument Cluster Description) . . .210 Warnings and Cautions. . . . . . . . . . . . . . . . . . . . . . .6 Warranty Information . . . . . . . . . . . . . . . . . . . . . .480 Washer Adding Fluid . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
Chrysler Group LLC 13C481-126-AD 300 4th Edition Printed in U.S.A.
