Ì81-2Ç:È-Ç)*FÎ 62697 09 Journey_OM.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
TABLE OF CONTENTS SECTION PAGE .............................................................3 1 1 INTRODUCTION 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4 UNDERSTANDING YOUR INSTRUMENT PANEL 5 STARTING AND OPERATING 6 WHAT TO DO IN EMERGENCIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .389 6 7 MAINTAINING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS m Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 m Vehicle Identification Number . . . . . . . . . . . . . . . 6 m How To Use This Manual . . . . . . . . . . . . . . . . . . 4 m Vehicle Modifications/Alterations . . . . . . . . . . . . 7 m Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION This manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a Warranty Information Booklet and various customer-oriented documents. You are urged to read these publications carefully. Following the instructions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against operating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS m A Word About Your Keys . . . . . . . . . . . . . . . . . .12 ▫ General Information . . . . . . . . . . . . . . . . . . . .18 ▫ Wireless Ignition Node (WIN) . . . . . . . . . . . . .12 m Security Alarm System — If Equipped . . . . . . . . .18 ▫ FOB With Integrated Key . . . . . . . . . . . . . . . . .13 ▫ Rearming Of The System . . . . . . . . . . . . . . . . .18 ▫ Tip Start Feature . . . . . . . . . . . . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . .24 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . .37 ▫ Programming Additional Transmitters . . . . . . . .25 m Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 ▫ Transmitter Battery Service . . . . . . . . . . . . . . .25 m Occupant Restraints . . . . . . . . . . . . . . . . . . . . . .38 ▫ General Information . . . . . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . .62 ▫ Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . . . .75 ▫ Child Restraint . . . . . . . . . . . . . . . . . . . . . . . .64 ▫ Safety Checks You Should Make Inside The Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 m Engine Break-In Recommendations . . . . . . . . . . .74 m Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Fob with Integrated Key and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the double-sided integrated key into the ignition switch with either side up. Wireless Ignition Node (WIN) The Wireless Ignition Node (WIN) operates similarly to an ignition switch.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Fob With Integrated Key The Fob with Integrated Key operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and a valet key, which stores in the rear of the Fob. 2 The valet key allows for entry into the vehicle should the battery in the vehicle or the Fob go dead. You can keep the valet key with you when valet parking.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Tip Start Feature Do not press the accelerator. Use the Fob with Integrated Key to briefly turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. Ignition Key Removal Place the shift lever in PARK. Turn the key to the LOCK position and then remove the key.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all doors when leaving the vehicle unattended. Key-In-Ignition Reminder If you open the driver’s door and the key is in the ignition, a chime will sound to remind you to remove the key. NOTE: The Key-In-Ignition reminder only sounds when the ignition key is placed in the LOCK or ACC position.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE after the bulb check, it indicates that there is a problem with the electronics. This condition will result in the engine being shut off after two seconds. If the Vehicle Security Alarm Indicator Light turns on during normal vehicle operation (vehicle running for longer than 10 seconds), it indicates that there is a fault in the electronics. Should this occur, have the vehicle serviced as soon as possible.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN). Keep the PIN in a secure location. This number is required for authorized dealer replacement of RKE transmitters. Duplication of RKE transmitters may be performed at an authorized dealer or by using the Customer Key Programming procedure. This procedure consists of programming a blank transmitter to the vehicle electronics.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The new integrated key is programmed. The RKE transmitter will also be programmed during this procedure. Repeat this procedure to program up to eight keys. If you do not have a programmed RKE transmitter with integrated key, contact your authorized dealer for details. NOTE: If a programmed key is lost, see your authorized dealer to have all remaining keys erased from the system’s memory. This will prevent the lost key from starting your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Arm the System 1. Remove the key from the ignition switch and exit the vehicle. 2. Lock the doors and liftgate by pressing the power door lock switch or the lock button on the Remote Keyless Entry (RKE) transmitter. NOTE: The system will not arm if you lock the doors with the manual door lock plungers or the door lock cylinder on the driver’s door. 3. Close all doors.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE arm regardless of whether you are inside or outside the vehicle. If you remain inside the vehicle and open a door, the alarm will sound. If this occurs, disarm the system. The interior lights will fade to off after about 30 seconds or they will immediately fade to off once the ignition switch is turned ON. Tamper Alert If something has triggered the alarm in your absence, the horn will sound three times when you unlock the doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Inserting the Fob with Integrated Key into the ignition switch disables all buttons on that transmitter; however, the buttons on the remaining transmitters will continue to work. Driving at speeds 5 mph (8 km/h) and above disables all transmitter buttons for all fobs. 21 To Unlock the Doors and Liftgate Press and release the UNLOCK button on the transmitter once to unlock the driver’s door, or twice within five seconds to unlock all doors and liftgate.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the following steps: 1. Press and hold the LOCK button on a programmed transmitter for at least four seconds, but no longer than 10 seconds. Then, press and hold the UNLOCK button while still holding the LOCK button. 2. Release both buttons at the same time. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Test the feature while outside of the vehicle by pressing the LOCK/UNLOCK buttons on the transmitter with the ignition switch in the LOCK position and the key removed. 4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the LOCK button on the transmitter while you are in the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the following steps: 1. Press the LOCK button on a programmed transmitter for at least four seconds, but no longer than 10 seconds. Then, press the PANIC button while still holding the LOCK button. 2. Release both buttons at the same time. 3. Test the feature while outside of the vehicle by pressing the LOCK button on the transmitter with the ignition switch in the LOCK position and the key removed. 4.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Programming Additional Transmitters Refer to Sentry Keyt, “Customer Key Programming.” (See page 17 for more information.) 2 If you do not have a programmed transmitter, contact your authorized dealer for details. Transmitter Battery Service The recommended replacement battery is one CR2032 battery. NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • BRAKE switch inactive (brake pedal not pressed) • Ignition key removed from ignition switch • Battery at an acceptable charge level, and • RKE PANIC button not pressed. To Enter Remote Start Mode Press and release the REMOTE START button on the RKE transmitter twice within five seconds. The parking lights will flash and the horn will honk twice (if programmed).
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Turn Off the Engine While in Remote Start Mode Press and release the REMOTE START button one time. NOTE: To avoid inadvertent shut downs, the system will disable the one time press of the REMOTE START button for two seconds after receiving a valid Remote Start request. DOOR LOCKS Manual Door Locks To lock each door, push the door lock plunger on each door trim panel downward. To unlock each door, pull the door lock plunger on each door trim panel upward.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors before you drive as well as when you park and leave the vehicle. Power Door Locks A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors and liftgate. • When leaving the vehicle, always remove the key from the ignition and lock your vehicle.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To prevent you from locking your key in the vehicle, the power door lock switch will not operate when the key is in the ignition and either front door is open. A chime will sound as a reminder to remove the key. Automatic Door Locks — If Equipped The auto door lock feature can be enabled or disabled by your authorized dealer. See your authorized dealer for programming.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows: • For vehicles equipped with the EVIC, refer to “Personal Settings (Customer Programmable Features)” under “Electronic Vehicle Information Center (EVIC)” in Section 4. • For vehicles not equipped with the EVIC, perform the following steps: 1. Enter the vehicle and close all doors. 31 4.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Engage the Child Protection Door Lock System 3. Repeat Steps 1 and 2 for the opposite rear door. 1. Open the rear door. NOTE: When the Child Protection Door Lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position. 2. Insert the tip of the valet key (or alike) into the child lock control and rotate it to the LOCK position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 NOTE: • After engaging the Child Protection Door Lock system, always test the door from the inside to make certain it is in the desired position. 2 • For emergency exit with the system engaged, move the lock plunger up to the UNLOCKED position, roll down the window, and open the door with the outside door handle. To Disengage the Child Protection Door Lock System 1. Open the rear door. 2.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS Power windows The window controls on the driver’s door trim panel control all of the door windows. There are single window controls on each passenger door trim panel, which operate the passenger door windows. The window controls will operate when the ignition switch is in the ON or ACC position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Settings (Customer Programmable Features)” under “Electronic Vehicle Information Center (EVIC)” in Section 4. WARNING! 35 To open the window part way, press the window switch to the first detent and release it when you want the window to stop. To stop the window from going all the way down during the Auto-down operation, pull up on the switch briefly. Never leave children in a vehicle with the key in the ignition switch.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • If the window runs into any obstacle during Autoclosure, it will reverse direction and then stop. Remove the obstacle and use the window switch again to close the window. • Any impact due to rough road conditions may trigger the auto-reverse function unexpectedly during autoclosure. If this happens, pull the switch lightly to the first detent and hold to close window manually.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Reset It may be necessary at some point in time to reactivate the Auto-up/Auto-down feature. To do so, perform the following steps: 1. Pull the window switch up to close window completely and continue to hold the switch up for an additional two seconds after the window is closed. 2.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To open the unlocked liftgate, squeeze the handle and pull the liftgate toward you. Gas props will raise and support the liftgate in the open position. WARNING! • Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. These fumes could injure you and your passengers. Keep the liftgate closed when you are operating the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Supplemental front seat mounted side airbags • An energy-absorbing steering column and steering wheel • Knee Bolsters/Blockers for front seat occupants • Three-point lap and shoulder belts for all seating positions • Pretensioning and load-limiting retractors for the front seat belts to enhance occupant protection by managing occupant energy during an impact event.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seating positions in your vehicle are equipped with lap/shoulder belts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the front seat. 2 2. The seat belt latch plate is along side the pillar near the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. 43 WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 you will prefer a higher position. When you release the anchorage try to move it up and down to make sure that it is locked in position. In the rear seat, move toward the center of the seat to position the belt away from your neck. Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Continue to slide the latch plate up until it clears the folded webbing. Seat Belt Pretensioners The driver and front passenger’s seat belts are equipped with pretensioning devices that are designed to remove any slack from the seat belt systems in the event of a collision. These devices improve the performance of the seat belt by assuring that the belt is tight around the occupant early in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 1. With all doors closed, and the ignition switch in any position except ON or START, buckle the driver’s seat belt. 4. Turn the ignition switch to the LOCK position. A single chime will sound to signify that you have successfully completed the programming. 2. Turn the ignition switch to the ON position, (engine does not need to be running). Wait for the Seat Belt Reminder Light to turn off and then proceed to the next step.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How to Engage the Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will here a clicking sound. This indicates the safety belt is now in the Automatic Locking mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 WARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug and in the recommended seating positions. Remove and store the extender when not needed. Driver and Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt restraint systems.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The front airbags have a multistage inflator design. This may allow the airbag to have different rates of inflation that are based on collision severity. WARNING! • Do not put anything on or around the front airbag covers or attempt to open them. You may damage the airbags and you could be injured because the airbags are no longer functional. These protective covers for the airbag cushions are designed to open only when the airbags are inflating.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Airbag covers may not be obvious in the interior trim, but they will open to allow airbag deployment. The supplemental front seat mounted side airbags are marked with an SRS label sewn into the outboard side of the seat. 51 WARNING! • Do not stack luggage or other cargo up high enough to block the location of the side curtain airbag. The area where the side curtain airbag is located should remain free from any obstructions.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Do not use a clothing bar mounted to the coat hooks in this vehicle. A clothing bar will impede the proper performance of the curtain airbags. Along with the seat belts, front airbags work with the instrument panel knee bolsters to provide improved protection for the driver and front passenger. Side curtain and seat airbags also work with seat belts to improve occupant protection.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Older children who do not use child restraints or belt-positioning booster seats should ride properly buckled up in the rear seat. Never allow children to slide the shoulder belt behind them or under their arm. 4. If a child from 1 to 12 years old must ride in the front passenger’s seat because the vehicle is crowded, move the seat as far back as possible and use the proper child restraint. (Refer to information on Child Restraint in this section.) 5.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Airbag System Components The airbag system consists of the following: • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly. In some collisions, the airbags won’t deploy at all. Always wear your seat belts even though you have airbags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Knee Impact Bolsters • Front Acceleration Sensors • Front Seat Belt Retractor Pretensioners • Front Seat Track Position Sensors How the Airbag System Works • The Occupant Restraint Controller (ORC) determines if a frontal collision is severe enough to require the airbags to inflate. If airbags are required, the ORC determines the necessary rate of airbag inflation for that event.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the Airbag Warning Light in your instrument panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away. • The Driver and Front Passenger Airbag/Inflator Units are located in the center of the steering wheel and the passenger’s side of the instrument panel.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE gas is generated to inflate the side curtain airbag. The inflating side curtain airbag pushes the outside edge of the headliner out of the way and covers the window. The airbag inflates in about 30 ms (about one-quarter of the time that it takes to blink your eyes) with enough force to injure you if you are not belted and seated properly, or if items are positioned in the area where the side curtain airbag inflates. This especially applies to children.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Do not replace the seat cover with an aftermarket seat cover. • Do not add a secondary seat cover other than those approved by the manufacturer of this vehicle/ Mopart. • At no time should any supplemental restraint system (SRS) component or SRS-related component or fastener be modified or replaced with any part except those, which are approved by the manufacturer of this vehicle/Mopart.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If a Deployment Occurs The airbag system is designed to deploy when the ORC detects a moderate to severe collision to help restrain the driver and front passenger and then to immediately deflate. NOTE: A frontal collision that is not severe enough to need airbag protection will not activate the system. This does not mean something is wrong with the airbag system.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, seat belt pretensioner, and seat belt retractor assembly replaced by an authorized dealer as soon as possible.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. You could be injured because the airbags are not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper passenger’s side of the instrument panel. Do not modify the front bumper, vehicle body structure, or frame.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Event Data Recorder (EDR) In the event of an accident, your vehicle is designed to record up to five seconds of specific vehicle data parameters (see the following list) in an event data recorder prior to the moment of airbag deployment, or near deployment, and up to a quarter second of high-speed deceleration data during and/or after airbag deployment. EDR data are ONLY recorded if an airbag deploys, or nearly deploys, and are otherwise unavailable.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 may be released for incorporation in aggregate crash databases, such as those maintained by the U.S. government and various states. Data of a potentially sensitive nature, such as would identify a particular driver, vehicle, or crash, will be treated confidentially.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Traction/stability control status • Tire Pressure Monitoring System status (if equipped) Child Restraint Everyone in your vehicle needs to be buckled up all the time, including babies and children. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants and Child Restraints • Safety experts recommend that children ride rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types of child restraints can be used rearward-facing, infant carriers and convertible child seats. • The infant carrier is only used rearward-facing in the vehicle. It is recommended for children who weigh up to about 20 lbs (9 kg).
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who are still too small to fit the vehicle’s seat belts properly. If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seatback, they should use a belt-positioning booster seat. The child and beltpositioning booster seat are held in the vehicle by the lap/shoulder belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. • A rearward-facing child restraint should only be used in a rear seat.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH — Child Seat Anchor System (Lower Anchors and Tether for CHildren) Your vehicle’s second row passenger seats are equipped with the child restraint anchor system called LATCH. The LATCH system provides for the installation of the child restraint without using the vehicle’s seat belts, instead securing the child restraint using lower anchors and upper tether straps from the child restraint to the vehicle structure.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Installing the LATCH-Compatible Child Restraint System We urge you to follow the manufacturer’s directions carefully when installing your child restraint. Not all child restraint systems will be installed as described here. Again, carefully follow the installation instructions that are provided with the child restraint system. Latch Anchorages 1 — Outer 60% Seating Position. Use Lower Anchor Loops A and B.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In addition, there are tether strap anchors located behind each rear seatback, near to the floor. Tether Strap Anchors Many, but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchor and a means of adjusting the tension in the strap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. • When using the LATCH attaching system to install a child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out of reach of children. It is recommended that before installing the child restraint, buckle the seat belt so the seat belt is tucked behind the child restraint.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE then allow the belt to retract into the retractor. For additional information on ALR, refer to “Automatic Locking Mode” in this section. To install a child restraint, first, pull enough of the seat belt webbing from the retractor to route it through the belt path of the child restraint and slide the latch plate into the buckle. Next, extract all the seat belt webbing out of the retractor and then allow the belt to retract into the retractor.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If necessary, move the seat forward to provide better access to the tether anchor. 73 NOTE: Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts. ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine in your vehicle. Drive moderately during the first 300 mi (500 km). After the initial 60 mi (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using a seat belt properly.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed. If you are required to drive with the liftgate open, make sure that all windows are closed, and the BLOWER switch on the climate control is set at high speed. DO NOT use the recirculation mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE turned ON. If the light is not lit during starting, or if the light stays on, flickers, or turns on while driving, have the system checked by an authorized dealer. Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 3 m Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 ▫ Illuminated Vanity Mirrors — If Equipped . . . .87 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . .84 m Parkviewt Rear Backup Camera — If Equipped . .88 ▫ Automatic Dimming Inside Mirror — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 m Hands-Free Communication (UConnectt) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .
80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ General Information . . . . . . . . . . . . . . . . . . . 116 m To Open And Close The Hood . . . . . . . . . . . . . 142 m Voice Recognition System — If Equipped . . . . . . 116 m Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 ▫ Voice Recognition System (VR) Operation . . . . 116 ▫ Exterior And Interior Lighting Control . . . . . . 144 ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 ▫ Flash To Pass . . . . . . . . . . . . . . . . . . . . . . . . 149 ▫ To Set At A Desired Speed . . . . . . . . . . . . . . . 158 ▫ Interior Lights . . . . . . . . . . . . . . . . . . . . . . . 149 ▫ To Deactivate . . . . . . . . . . . . . . . . . . . . . . . . 158 m Windshield Wipers And Washers . . . . . . . . . . . . 151 ▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . . 158 ▫ Intermittent Wiper System . . . . . . . . . . . . . . .
82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Using HomeLinkt . . . . . . . . . . . . . . . . . . . . . 166 ▫ Venting Sunroof - Express . . . . . . . . . . . . . . . 170 ▫ Reprogramming A Single HomeLinkt Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 ▫ Sunshade Operation . . . . . . . . . . . . . . . . . . . 171 ▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 ▫ Troubleshooting Tips . . . . . . . . . . . . . . . . . . . 167 ▫ General Information . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 m Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 ▫ In-Floor Storage Bin With Removable Liner . . . 184 ▫ Beverage Cooler/Storage Compartment — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 m Cargo Area Features . . . . . . . . . . . . . . . . . . . . . 186 ▫ Instrument Panel Storage Compartment — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 ▫ Center Console Storage . . . . . . . . .
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view through the rear window. A two-point pivot system allows for horizontal and vertical mirror adjustment. Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Inside Mirror — If Equipped This mirror automatically adjusts for annoying headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light will illuminate next to the switch when the automatic dimming feature is activated. 85 CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror.
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicles and other objects seen in the passenger-side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger-side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger-side convex mirror. Failure to follow this warning may result in serious injury or death.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 Models with Express Window Feature Press and release the mirror SELECT button marked L or R and then press one of the four arrow buttons to move the mirror in the direction the arrow is pointing. The selection times out after 30 seconds of inactivity in order to guard against accidentally changing a mirror position following an adjustment. 3 Heated Remote Control Mirrors — If Equipped These mirrors are heated to melt frost or ice.
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull the sun visor toward the inside rearview mirror to extend it. NOTE: The video will only display while the shift lever is in REVERSE. PARKVIEWT REAR BACKUP CAMERA — IF EQUIPPED The Parkviewt Rear Backup Camera captures live video of the area behind the vehicle. The live video displays on the radio’s display screen when backing up your vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • To avoid vehicle damage, only use the Rear Backup Camera as a parking aid, as the camera is unable to capture every obstacle or object in your drive path. • To avoid vehicle damage, drive slowly when backing up a vehicle so that you can stop in time when an obstacle comes into view. It is recommended that the driver look frequently over their shoulder when backing up a vehicle.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The UConnectt system requires a cellular phone equipped with the Bluetootht 9Hands-Free Profile,9 Version 0.96 or higher. See the UConnectt website for supported phones. NOTE: For UConnectt customer support, visit the following websites: • www.chrysler.com/uconnect • www.dodge.com/uconnect • www.jeep.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 radio or the mirror has the two control buttons (PHONE Button and VOICE RECOGNITION button) that will enable you to access the system. can be adjusted either from the radio volume control knob or from the steering wheel radio control (right switch), if so equipped. Voice Recognition Button Actual button location may vary with radio. The individual buttons are described in the “Operation” section.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For certain operations, compound commands can be used. For example, instead of saying 9Setup9 and then 9Phone Pairing,9 the following compound command can be said: 9Setup Phone Pairing.9 • For each feature explanation in this section, only the combined form of the voice command is given. You can also break the commands into parts and say each part of the command when you are asked for it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 To complete the pairing process, you will need to reference your cellular phone Owner’s Manual. The UConnectt website may also provide detailed instructions for pairing. • For identification purposes, you will be prompted to give the UConnectt system a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dial by Saying a Number Call by Saying a Name • Press the PHONE button to begin. • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Dial.9 • After the 9Ready9 prompt and the following beep, say “Call.9 • The system will prompt you to say the number you want to call. • The system will prompt you to say the name of the person you want to call. • For example, you can say 9234-567-8901.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Add Names to Your UConnectt Phonebook NOTE: Adding names to the phonebook is recommended when the vehicle is not in motion. • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Phonebook New Entry.9 • When prompted, say the name of the new entry. Use of long names helps the voice recognition and it is recommended. For example, say 9Robert Smith9 or 9Robert9 instead of 9Bob.9 • When prompted, enter the number designation (e.g.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Object Exchange Profile (OBEX). Please see your phone Owner’s Manual for specific instructions on how to send these entries from your phone. Edit Entries in the UConnectt Phonebook NOTE: • The phone handset must support Bluetootht OBEX transfers of phonebook entries to use this feature. • Press the PHONE button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 9Phonebook Edit9 can be used to add another phone number to a name entry that already exists in the phonebook. For example, the entry John Doe may have a mobile and a home number, but you can add ”John Doe’s” work number later using the 9Phonebook Edit9 feature. Delete Entries in the UConnectt Phonebook NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. • Press the PHONE button to begin.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After confirmation, the phonebook entries will be deleted. • The UConnectt system will then prompt you as to the number designation you wish to call. • Note that only the phonebook in the current language is deleted. • The selected number will be dialed. List All Names in the UConnectt Phonebook • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Phonebook List Names.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE the call, press and hold the PHONE button until you hear a single beep, indicating that the incoming call was rejected. Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone. Press the PHONE button to place the current call on hold and answer the incoming call.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Conference Call When two calls are in progress (one active and one on hold), press and hold the PHONE button until you hear a double beep indicating that the two calls have been joined into one conference call. hold may not become active automatically. This is cell phone-dependent. To bring the call back from hold, press and hold the PHONE button until you hear a single beep. Redial • Press the PHONE button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the ignition key is switched to OFF, a call can continue on the UConnectt system either until the call ends, or until the vehicle battery condition dictates cessation of the call on the UConnectt system and transfer of the call to the mobile phone. • After the ignition key is switched to OFF, a call can continue on the UConnectt system for a certain duration, after which the call is automatically transferred from the UConnectt system to the mobile phone.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the phone is not reachable and the UConnectt system is operational, you may reach the emergency number as follows: • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Emergency9 and the UConnectt system will instruct the paired cellular phone to call the emergency number. This feature is supported in the U.S., Canada, and Mexico.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Paging To learn how to page, refer to 9Working with Automated Systems.9 Paging works properly except for pagers of certain companies, which time out a little too soon to work properly with the UConnectt system. Voice Mail Calling To learn how to access your voice mail, refer to 9Working with Automated Systems.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE send the corresponding phone number associated with the phonebook entry, as tones over the phone. NOTE: • You may not hear all of the tones due to cellular phone network configurations; this is normal. • Some paging and voice mail systems have system time out settings that are too short and may not allow the use of this feature.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dialing Using the Cellular Phone Keypad You can dial a phone number with your cellular phone keypad and still use the UConnectt system (while dialing via the cell phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired Bluetootht cellular phone, the audio will be played through your vehicle’s audio system. The UConnectt system will work the same as if you dial the number using voice recognition.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE from your UConnectt paired cellular phone to the UConnectt system or vice versa, press the “Voice Recognition” button and say 9Transfer Call.9 Connect or Disconnect Link Between the UConnectt System and Cellular Phone Your cellular phone can be paired with many different electronic devices, but can only be actively 9connected9 with one electronic device at a time. • When prompted, say 9List Phones.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The selected phone will be used for the next phone call. If the selected phone is not available, the UConnectt system will return to using the highest priority phone present in or near (approximately within 30 ft [9 m]) the vehicle. Delete UConnectt Paired Cellular Phones • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Setup Phone Pairing.9 • At the next prompt, say 9Delete9 and follow the prompts.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Repeat the words and phrases when prompted by the UConnectt system. For best results, the Voice Training session should be completed when the vehicle is parked with the engine running, all windows closed, and the blower fan switched OFF. • Speak normally, without pausing, just as you would speak to a person sitting a few feet/meters away from you. This procedure may be repeated with a new user. The system will adapt to the last trained voice only.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 • Even though the system is designed for users speaking in North American English, French, and Spanish accents, the system may not always work for some. • The UConnectt phonebook nametag recognition rate is optimized for the person who stored the name in the phonebook. • When navigating through an automated system such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say 9Send.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operation from the driver’s seat. • Performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the UConnectt system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 3
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 3
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing phonebook previous record again Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) redial return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call UConnectt Tutorial try again voice training work yes 115 3
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. recognize user voice commands may be negatively affected by rapid speaking or a raised voice level.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pressing the VR hard-key while the system is speaking is known as “barging in.” The system will be interrupted and you can add or change commands. This will become helpful once you start to learn the options. NOTE: At any time, you can say the words CANCEL, HELP, or MAIN MENU. These commands are universal and can be used from any menu. All other commands can be used depending upon the active application.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Main Menu Start a dialogue by pressing the VR hard-key. You may say MAIN MENU to switch to the main menu. In this mode, you can say the following commands: • PREVIOUS STATION (to select the previous station) • RADIO MENU (to switch to the radio menu) • MAIN MENU (to switch to the main menu) • DISC (to switch to the disc mode) Radio FM To switch to the FM band say FM or RADIO FM.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Satellite Radio To switch to satellite radio mode say SAT or SATELLITE RADIO.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE − CONTINUE (to continue recording) − DELETE (to delete the recording) • PLAY MEMOS (to play previously recorded memos) — During the playback you may press the VR hardkey to stop playing memos.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 SEATS Manual Front Seat Adjustments Forward and Rearward Adjustment The manual seat adjustment bar is at the front of the seat, near the floor. Pull the bar upward to move the seat forward or rearward. Release the bar once the seat is in the position desired. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust any seat only while the vehicle is parked. Recliner Adjustment The control lever is on the outboard side of the seat. To recline the seat, lean forward slightly and lift the lever. Then lean back to the position desired and release the lever.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked. 123 Lumbar Support — If Equipped The control lever is on the outboard side of the seatback. Turn the control lever downward to increase the lumbar support or upward to decrease the lumbar support as desired.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver’s Seat Height Adjustment — If Equipped The control lever is located on the outboard side of the seat. Raise the lever to raise the seat. Lower the lever to lower the seat. The total seat travel is 2.15 in (55 mm). Fold Flat Front Passenger Seat — If Equipped This feature allows for extended cargo space.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pull upward on the lever to fold or unfold the seat. 125 WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. Adjust any seat only while the vehicle is parked.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Seat — If Equipped The power seat switch is on the outboard side of the seat near the floor. Use this switch to move the seat up, down, forward, rearward, or to tilt the seat. CAUTION! Do not place any article under any seat as it may cause damage to the seat controls. WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Front Seats Adjust the head restraints so that the upper edge is as high as practical. The left sleeve that the head restraint post slides through contains a lock release button. You can raise the head restraint without pressing this button. However, you must press this button to lower the head restraint.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Do not sit in a seat or allow a passenger to sit in a seat without having the head restraint installed and adjusted properly. Failure to follow this warning may result in personal injury to you or your passenger in the event of an accident. • Do not leave a head restraint that is removed from a seat loose in the vehicle. A loose head restraint thrown forward in a collision or hard stop could endanger the occupants of the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Heated Seats — If Equipped Heated seats provide comfort and warmth on cold days and can help soothe sore muscles and backs. The heaters provide the same heat level for both cushion and back. The driver’s seat and front passenger’s seat are heated. The controls for each heater are located in the switch bank in the center of the instrument panel. After turning ON the ignition, you can choose from High, Low, or Off heat settings.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE level heating is selected, the system automatically turns the heater and the indicator light off after 30 minutes of continuous operation. NOTE: Once a heat setting is selected, heat will be felt within two to five minutes.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. 131 To Fold the Seat 1. Locate the control lever on the lower outboard side of the seat. 3 • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Lift the control lever with the other hand, allow the seatback to move forward slightly, and then release the lever. WARNING! To prevent personal injury or damage to objects, keep your head, arms, and objects out of the folding path of the seatback. 4. Gently guide the seatback into the folded position. To Unfold the Seat Raise the seatback and lock it in place. WARNING! Be certain that the seatback is locked securely into position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust any seat only while the vehicle is parked.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Recliner Adjustment The control lever is on the outboard side of the seat. To recline the seat, lean back, lift the lever, position the seatback as desired, and then release the lever. To return the seatback to its normal upright position, lean back, lift the lever, lean forward, and then release the lever once the seatback is in the upright position. WARNING! • Adjusting a seat while the vehicle is moving is dangerous.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 20% Seatback/Armrest — Second Row Passenger Seat The latch release-loop is located at the top of the 20% seatback/armrest. Pull the release-loop upward to release the latch and then downward to lower the 20% seatback/armrest. Latch Release-Loop 135 Raise the 20% seatback/armrest and lock it in place when not in use or when additional seating area is required.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Integrated Child Booster Seat — If Equipped The Integrated Child Booster Seat is located in each outboard second-row passenger seat. The Booster Seat is designed for children weighing between 48 and 85 lbs (22 and 39 kg) and 57 in (145 cm) tall or less. Integrated Child Booster Seat The booster seat latch release-loop is located at the front of the seat cushion. Pull the release-loop forward to release the latch and seat cushion.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 WARNING! Be certain that the seat cushion is locked securely into position before using the seat. Otherwise, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat cushion could cause serious injury.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Move the control lever on the upper outboard side of the seatback forward, and in one fluid motion, the seat cushion flips upward and the seat moves forward on its tracks.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: A hand-grip is molded into the front of each quarter trim panel near the door opening to assist entry and exit from the third-row passenger seats. 139 WARNING! Do not drive the vehicle with the seat in this position, as it is only intended for entering and exiting the third row seats. Failure to follow this warning may result in personal injury. To Unfold and Move the Second-Row Passenger Seat Rearward 1.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Be certain that the seatback and seat are locked securely into position. Otherwise, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. To Fold the Seat Pull the latch release-loop located at the top of the seatback upward, push the seat forward slightly, and release the release-loop. Then, continue to push the seat forward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Unfold the Seat Grasp the assist strap loop on the seatback and pull it toward you to raise the seatback. Continue to raise the seatback until it locks in place. Then, raise the head restraint to lock it in place. 141 The seatback can also be locked in a reclined position. To do so, pull the latch release-loop located at the top of the seatback upward, allow the seatback to recline, and release the release-loop.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. First, pull the hood release lever located under the left side of the instrument panel. Outside of the vehicle, locate the safety latch lever near the center of the grille between the grille and hood opening. Push the safety latch lever to the right and then raise the hood.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Use the hood prop rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the underside of the hood. 143 To prevent possible damage: • Before closing hood, make sure the hood prop rod is fully seated into its storage retaining clips. • Do not slam the hood to close it. Use a firm downward push at the center front edge of the hood to ensure that both latches engage.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Exterior and Interior Lighting Control The multifunction lever on the left side of the steering column controls the operation of the headlights, parking lights, turn signal lights, instrument panel lights, instrument panel light dimming, interior lights, and fog lights (if equipped). Headlights and Parking Lights Turn the end of the multifunction lever to the first detent for parking light operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped This system automatically turns the headlights on or off according to ambient light levels. To turn the system ON, turn the end of the multifunction lever to the AUTO position (third detent). When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you turn the ignition switch to the LOCK position.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you turn the headlights, or parking lights, or ignition switch ON again, the system will cancel the delay. If you turn the headlights OFF before the ignition, they will turn off in the normal manner. The headlight delay time is programmable on vehicles equipped with the EVIC. Refer to “Headlight Off Delay,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Turn Signals Move the multifunction lever upward or downward and the corresponding turn signal indicator on the instrument panel will flash to show proper operation of the front and rear turn signal lights. Front Fog Light NOTE: The front fog lights will only operate with the headlights on low beam. Selecting high beam headlights will turn off the front fog lights.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE You can signal a lane change by moving the lever upward or downward partially without moving beyond the detent. NOTE: If either turn signal indicator has a very fast flash rate, check for an inoperative outside light bulb. If an indicator fails to light when the lever is moved, see your authorized dealer for service. Highbeam/Lowbeam Select Switch Push the multifunction lever away from you to switch the headlights to HIGH beam.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Flash to Pass You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will cause the headlights to turn on at high beam and remain on until the lever is released. UNLOCK button on the Remote Keyless Entry (RKE) transmitter, open a door or the liftgate, or turn the Dimmer Control completely upward to the second detent.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Light This light is mounted in the liftgate trim panel. It turns on when you press the UNLOCK button on the RKE transmitter, open a door or the liftgate, or turn the Dimmer Control completely upward to the second detent. Battery Saver Feature To protect the battery, the interior lights will turn off automatically within 10 minutes of turning the ignition switch to the LOCK position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Parade Mode (Daytime Brightness Feature) Rotate the Dimmer Control to the first detent to brighten the odometer and radio display when the parking lights or headlights are on during daylight conditions. WINDSHIELD WIPERS AND WASHERS The Windshield Wiper/Washer control lever is located on the right side of the steering column. Interior Light ON Rotate the Dimmer Control completely upward to the second detent to turn ON the interior lights.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the end of the lever to the first detent past the intermittent settings for low speed wiper operation, or to the second detent past the intermittent settings for high speed wiper operation. NOTE: The wipers will automatically return to the park position if you turn OFF the ignition switch while they are operating. The wipers will resume operation when you turn the ignition switch to the ON position again.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Intermittent Wiper System Use the intermittent wiper system when weather conditions make a single wiping cycle with a variable pause between cycles desirable. Rotate the end of the Windshield Wiper/Washer control lever to the first detent, and then turn the end of the lever to select the desired delay interval.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights with Wipers (Available with Auto Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned ON if the multifunction lever (on the left side of the steering column) is placed in the (A) AUTO position. In addition, the headlights will turn off when the wipers are turned OFF if they were turned ON by this feature.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Sudden loss of visibility through the windshield could lead to an accident. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with the defroster before and during windshield washer use. Adding Washer Fluid NOTE: Refer to the “Engine Compartment” diagram in Section 7 for the location of the washer fluid reservoir.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT/TELESCOPING STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column. To unlock the steering column, push the control handle downward. To tilt the steering column, move the steering wheel upward or downward as desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 25 mph (40 km/h). Electronic Speed Control Operation The speed control lever is located on the right side of the steering wheel. 157 To Activate Push and release the ON/OFF button located on the end of the speed control lever. The Cruise Indicator Light in the instrument cluster will illuminate.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you are not using it. To Set At A Desired Speed When the vehicle reaches the speed desired, press downward on the lever to SET DECEL and release.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Vary the Speed Setting When the speed control is set, you can increase speed by pushing up and holding the lever in RESUME ACCEL. Release the lever when the desired speed is reached, and the new set speed will be established. Tapping RESUME ACCEL once will result in a 1 mph (1.6 km/h) speed increase. Each time the lever is tapped, speed increases so that tapping the lever three times will increase speed by 3 mph (5 km/h), etc.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Speed Control can be dangerous where the system can’t maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control. An accident could be the result. Don’t use Speed Control in heavy traffic or on roads that are winding, icy, snow-covered, or slippery.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Courtesy/Reading Lights Refer to “Courtesy/Reading Lights” under “Lights” in Section 3. Sunglasses Storage To access the storage compartment, press on the raised bars on the compartment door in the center of the console and release and the door will swing downward. Interior Observation Mirror The convex interior observation mirror provides the driver and front seat passenger a wide field of view to conveniently view passengers sitting in the rear passenger seats.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The HomeLinkt buttons that are located in the sun visor designate the three different HomeLinkt channels. WARNING! Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people or pets are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicle exhaust contains carbon monoxide, a dangerous gas. Do not run your vehicle in the garage while training the transceiver. Exhaust gas can cause serious injury or death. Programming HomeLinkT Before You Begin If you have not trained any of the HomeLinkt buttons, erase all channels before you begin training. 163 Your vehicle should be parked outside of the garage when programming. 1. Turn the ignition switch to the ON/RUN position. 2.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Some gate operators and garage door openers may require you to replace Step 3 with procedures noted in the “Gate Operator/Canadian Programming” section. • After training a HomeLinkt channel, if the garage door does not operate with HomeLinkt and the garage door opener was manufactured after 1995, the garage door opener may have a rolling code. If so, proceed to the heading “Programming A Rolling Code System.” 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 7. Return to the vehicle and press the programmed HomeLinkt button twice (holding the button for two seconds each time). If the device is plugged in and activates, programming is complete. If the device does not activate, press the button a third time (for two seconds) to complete the training. If you have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the Internet at www.HomeLink.com for information or assistance.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Similar to this Canadian law, some U.S. gate operators are designed to “time-out” in the same manner. Then proceed with Step 4 under “Programming HomeLinkt” earlier in this section. It may be helpful to unplug the device during the cycling process to prevent possible overheating of the garage door or gate motor. Using HomeLinkT To operate, simply press and release the programmed HomeLinkt button. Activation will now occur for the trained device (i.e.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 3. Without releasing the button, proceed with Programming Homelinkt Step 2 and follow all remaining steps. • Press the “Learn” button on the Garage Door Opener to complete the training for a Rolling Code. Security It is advised to erase all channels before you sell or turn in your vehicle.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The transmitter has been tested and it complies with FCC and IC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. The term IC before the certification/registration number only signifies that Industry Canada technical specifications were met. POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Never leave children in a vehicle, with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power SUNROOF switch. Such entrapment may result in serious injury or death. 169 Opening Sunroof - Manually Press and hold the switch in the rearward position. Release the switch when the sunroof is in the position desired and it will stop moving.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the switch in the forward position, the sunroof will close fully and then stop automatically. Release the switch once the sunroof stops moving. Closing Sunroof - Express Press the switch forward and release, and the sunroof will close automatically from any position. The sunroof will close fully and stop automatically. This is called Express Close. During Express Close operation, any movement of the sunroof switch will stop the sunroof.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Sunshade Operation The sunshade can be opened manually. However, the sunshade will open automatically as the sunroof opens. Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. NOTE: The sunshade cannot be closed if the sunroof is open.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunroof Fully Closed Press the switch forward and release to ensure that the sunroof is fully closed. ELECTRICAL POWER OUTLETS There are two fused 12-Volt power outlets located in the center console below the radio. The outlet on the top has power available when the ignition switch in the ON or ACC position. The outlet on the bottom has power available when the ignition switch is in the LOCK, ON, or ACC position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE A third fused 12-Volt power outlet is located on the back of the center console. This outlet has power available when the ignition switch is in the LOCK, ON or ACC position. 173 A fourth fused 12-Volt power outlet is located on the left quarter trim panel in the cargo area. This outlet has power available when the ignition switch is in the ON or ACC position.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The control switch for the outlet is located in the switch bank above the climate control. 175 NOTE: Due to built-in overload protection, the power outlet will shut down if the 115 Volt AC (150 Watt maximum) power rating is exceeded. WARNING! To Avoid Serious Injury or Death: • Do not use a three-prong adaptor. • Do not insert any objects into the receptacles. Power Inverter Switch Press and release the switch once to turn ON the power outlet.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUP AND BOTTLE HOLDERS CUPHOLDERS Armrest Cupholders Center Console Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 BOTTLE HOLDERS 3 Quarter Trim Panel Cupholders (Seven Passenger Models) Door Bottle Holder
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! If containers of hot liquid are placed in the bottle holder, they can spill when the door is closed, burning the occupants. Be careful when closing the doors to avoid injury. cooler is designed to hold up to two 12 oz (0.35 l) cans when placed horizontally in the retainer. The beverage retainer is removable to allow for storage of other items in the compartment when not in use as a cooler.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Press and release the button on the door to open it. The large door swings upward to allow easy access to the compartment’s contents. Beverage Cooler Operation The blower speed setting on the climate control sets the rate at which air flows into the compartment. The airflow control valve inside the compartment determines how much air flows into the compartment.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Whether operating a Manual Heating and A/C system or operating an ATC system in a manual mode, the A/C indicator must be ON to cool the compartment. Instrument Panel Storage Compartment — If Equipped Press and release the button on the door to open it. The door swings upward to allow easy access to the compartment.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Center Console Storage 3 Center Console Cubby Bin Center Stack Cubby Bin
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Flip ’n Stow™ Front Passenger Seat Storage — If Equipped The seat latch release-loop is located in the center of the seat cushion between the seat cushion and the seatback. Pull the loop upward to release the latch and then forward to open the seat to the detent position. Center Console Storage Bin NOTE: The sliding armrest (if so equipped) must be in the rearward position in order to access the release button on the front of the bin door.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Make sure that objects inside the bin do not interfere with the latch before closing the seat. Push the seat cushion downward after closing it to make sure it latches to the base. WARNING! 183 Second-Row Passenger Seat Temporary Storage Bin This is a temporary storage bin designed for use when the 20% seatback/armrest is down. Be sure to remove all items from this bin before raising the 20% seatback/ armrest.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Second-Row Map Pocket and Grocery Retainers In-Floor Storage Bin with Removable Liner A map storage pocket and grocery retainers are located on the back of the drivers seatback. NOTE: Position the front seat to at least a mid-track position to provide easier access to the storage bin. An in-floor storage bin is located behind each front seat. Each 1.6 gal (5.9 l) bin can hold up to 12, 12 oz (0.35 l) cans, plus ice, or other items.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 The liner can be removed for easy cleaning by lifting on the notches as shown. 3 In-Floor Storage Bin To access the bin, position the floor mat aside (if equipped). Pull the door latch release-loop upward to release the latch and then forward to open the bin door.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES Rechargeable Flashlight — If Equipped The rechargeable LED flashlight stores in its charging station in the left rear quarter trim panel. To remove it, press on the indent on the side of the flashlight and release. NOTE: Be sure to return the flashlight to its charging station when not in use to ensure it is ready for operation the next time you need it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • A retractable cargo area cover (if equipped). Seven Passenger System Features • A large built-in storage bin with a hinged hardcover located in the floor behind the third-row passenger seats. Cargo Tie-Downs Cargo tie-downs are located on both rear trim panels. These tie-downs should be used to secure loads safely when the vehicle is moving. 3 • 60/40 split second-row passenger seats with fold flat feature, which allows for extended cargo space.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible. • Cargo tie-downs are not safe anchors for a child seat tether strap. In a sudden stop or collision, a tie-down could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. • Place as much cargo as possible in front of the rear axle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Retractable Cargo Area Cover (If Equipped) — Five Passenger Models NOTE: The purpose of this cover is for privacy, not to secure loads. It will not prevent cargo from shifting or protect passengers from loose cargo. 189 the left or the right spring-loaded post (located on the ends of the cover housing) into the left attachment point or the right attachment point (shown).
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Next, grab the cover handle and pull the cover toward you. As the cover nears the liftgate opening, guide the rear attachment posts (on both ends of the cover) into the notches in the trim panels. Then, lower the cover to position the posts into the bottom of the notches and release the handle. Positioning Retractable Cargo Area Cover WARNING! A cargo cover that is unsecured in the vehicle could cause injury in an accident.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rear Window Wiper/Washer — If Equipped The Rear Window Wiper/Washer Control is located on the right side of the steering column. 191 The rotary ring switch on the lever controls rear wiper and washer operation. Rotate the switch upward to the first detent to activate the rear wiper. Rotate the switch upward to the second detent to activate the rear washer. The washer will continue to operate until you release the switch.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Turn the rear wiper OFF when driving through an automatic car wash. Damage to the rear wiper may result if the REAR WIPER switch is left in the ON position. • In cold weather, always turn OFF the REAR WIPER switch and allow the rear wiper to return to the park position before turning OFF the engine. If the REAR WIPER switch is left ON and the rear wiper freezes to the window, damage to the rear wiper motor may occur when the vehicle is restarted.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Window Defroster — If Equipped The Electric Rear Window Defroster control is located on the climate control. Press this button to turn on the rear window defroster and the heated outside rearview mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on. The defroster automatically turns off after approximately 10 minutes. For five more minutes of operation, press the button again.
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ROOF LUGGAGE RACK — IF EQUIPPED The roof rack cross rails and side rails are designed to carry cargo weight. The load must not exceed 150 lbs (68 kg), and it should be distributed uniformly over the cross rails. In addition, the roof rack does not increase the total load carrying capacity of the vehicle. Be sure the total load of cargo inside the vehicle plus that on the roof rack does not exceed the maximum vehicle load capacity. To Move the Cross Rails 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Relocate the cross rails, aligning the cross rail stanchions (end pieces) with one of the vertical marks on the outboard surface of the side rail for proper positioning. There are four frontward marks for the front cross rail and four rearward marks for the rear cross rail. Make sure the cross rails remain equally spaced or parallel at any position for proper function. 3. Tighten the knobs on each cross rail to lock it in position.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! • Cross rails should remain equally spaced or parallel at any luggage rack position for proper function. Noncompliance could result in damage to the roof rack, cargo, and vehicle. Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS m Instrument Panel Features . . . . . . . . . . . . . . . . . 201 ▫ Compass Display . . . . . . . . . . . . . . . . . . . . . 225 m Instrument Cluster . . . . . . . . . . . . . . . . . . . . . . 202 ▫ Personal Settings (Customer Programmable Features) . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 m Instrument Cluster Descriptions . . . . . . . . . . . . 203 m Electronic Vehicle Information Center (EVIC) — If Equipped . . . . . . . . . . . . . . .
198 UNDERSTANDING YOUR INSTRUMENT PANEL m Sales Code REN — Multimedia System — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 ▫ Operating Instructions — Satellite Radio (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . 232 ▫ Operating Instructions — Voice Recognition System (VR) (If Equipped) . . . . . . . . . . . . . . . 233 ▫ Operating Instructions — Hands-Free Communication (UConnectt) (If Equipped) . . . 233 ▫ Clock Setting Procedure . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL m Sales Code REU — Multimedia System — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 199 ▫ Operating Instructions - Satellite Mode . . . . . . 269 ▫ Operating Instructions — Satellite Radio . . . . . 263 ▫ Operating Instructions - Hands-Free Phone (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . 271 ▫ Operating Instructions — Hands-Free Communication (UConnectt) (If Equipped) . . .
200 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Left-Hand Switch Functions For Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 278 ▫ Single-Zone Manual Air Conditioning And Heating System . . . . . . . . . . . . . . . . . . . . . . 284 ▫ Left-Hand Switch Functions For Media (i.e., CD) Operation . . . . . . . . . . . . . . . . . . . . 279 ▫ Two- And Three-Zone Manual Air Conditioning And Heating Systems — If Equipped . . . . . . . . . . . . . . . . . 285 m CD/DVD Maintenance . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 201 INSTRUMENT PANEL FEATURES 4 1 2 3 4 — Side Window Demist Outlet — Air Outlet — Instrument Cluster — Storage Compartment or Remote Display Panel* 5 6 7 8 — — — — HAZARD Switch Switch Bank Beverage Cooler/Storage Compartment* Glove Box 9 — Climate Control 10 — Radio 11 — Ignition Switch * If Equipped
202 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Coolant Temperature Gauge The temperature gauge indicates engine coolant temperature. Any reading within the normal range indicates that the cooling system is operating satisfactorily. The gauge pointer will likely indicate a high temperature when driving in hot weather, up mountain grades, in heavy traffic, or when towing a trailer. If the pointer rises to the “H” mark, safely pull over and stop the vehicle.
204 UNDERSTANDING YOUR INSTRUMENT PANEL turn it off. Also, shift the transaxle into NEUTRAL and idle the vehicle. If the temperature reading does not return to normal, turn the engine off immediately and call for service. (See page 390 for more information.) NOTE: As the coolant temperature gauge approaches 9H,9 this indicator will illuminate and a single chime will sound. Further overheating will cause the temperature gauge to pass 9H.
UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to Section 7 and follow the warnings under the Cooling System Pressure Cap paragraph. 5. Front Fog Light Indicator Light — If Equipped This light shows when the fog lights are ON. (See page 146 for more information.) 6.
206 UNDERSTANDING YOUR INSTRUMENT PANEL 10. Vehicle Security Alarm (VSA) Indicator Light — If Equipped This light will flash rapidly for approximately 16 seconds when the vehicle Security system is arming and then flash slowly when the system is armed. The light will also turn on for about three seconds when the ignition switch is first turned ON. (See page 18 for more information.) 11. All-Wheel Drive (AWD) Failure Indicator Light — If Equipped This light monitors the All-Wheel-Drive (AWD) system.
UNDERSTANDING YOUR INSTRUMENT PANEL 15. Odometer/Trip Odometer The odometer shows the total distance the vehicle has been driven. The trip odometer shows individual trip mileage. Refer to “Trip Odometer button” for additional information. NOTE: U.S. Federal regulations require upon transfer of vehicle ownership, the seller certify the mileage the vehicle has been driven.
208 UNDERSTANDING YOUR INSTRUMENT PANEL off the message. If the problem persists, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the MIL. (See page 419 for more information.) Change Oil Message (Base And Mid Line Clusters Only) Your vehicle is equipped with an engine oil change indicator system.
UNDERSTANDING YOUR INSTRUMENT PANEL 16. Electronic Throttle Control (ETC) Warning Light — If Equipped This light will turn on briefly as a bulb check when the ignition switch is turned ON. This light will also turn on while the engine is running if there is a problem with the Electronic Throttle Control (ETC) system. If the light turns on while the engine is running, safely bring the vehicle to a complete stop as soon as possible, place the shift lever in PARK, and cycle the ignition key.
210 UNDERSTANDING YOUR INSTRUMENT PANEL 18. Charging System Warning Light This light shows the status of the electrical charging system. The light should turn on when the ignition switch is first turned ON and remain on briefly as a bulb check. If the light stays on or turns on while driving, turn off some of the vehicle’s electrical devices, such as the fog lights or rear defroster. If the light remains on, it means that the charging system is experiencing a problem.
UNDERSTANDING YOUR INSTRUMENT PANEL As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale light illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure.
212 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
UNDERSTANDING YOUR INSTRUMENT PANEL 23. Electronic Stability Program (ESP)/Traction Control System (TCS) Indicator Light If this indicator light flashes during acceleration, ease up on the accelerator and apply as little throttle as possible. Adapt your speed and driving to the prevailing road conditions. (See page 323 for more information.) 213 stays on through several of your typical driving cycles. In most situations, the vehicle will drive normally and will not require towing.
214 UNDERSTANDING YOUR INSTRUMENT PANEL 25. Electronic Stability Program (ESP)/Brake Assist System (BAS) Malfunction Indicator Light – If Equipped The yellow ESP/BAS Malfunction Indicator Light will turn on when the ignition switch is turned to the ON position. The light should go out with the engine running. The system will turn the light on continuously while the engine is running if it detects a malfunction in either the ESP or the BAS or both.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The light may flash momentarily during sharp cornering maneuvers due to a change in fluid level. If so, the vehicle should have service performed and the brake fluid level checked. Immediate repair is necessary if brake failure is indicated. WARNING! Driving a vehicle with the Brake System Warning Light on is dangerous. A significant decrease in braking performance or vehicle stability during braking may occur.
216 UNDERSTANDING YOUR INSTRUMENT PANEL 27. Airbag Warning Light This light will turn on for four to six seconds as a bulb check when the ignition switch is first turned ON. If the light is either not on during starting, or stays on, or turns on while driving, then have the system inspected at your authorized dealer as soon as possible. (See page 61 for more information.
UNDERSTANDING YOUR INSTRUMENT PANEL 217 NOTE: • Magnetic materials should be kept away from the top of the instrument panel, as this is where the compass sensor is located. • The shift lever must be in PARK to enter the variance setting mode. To set the variance, first, turn the ignition switch to the ON position. Next, press and hold the COMPASS/ TEMPERATURE DISPLAY button until the current variance zone number displays (approximately 10 seconds).
218 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The default variance setting is Zone 8. When setting the variance, the numbering will wrap around from Zone 15 to Zone 1. Calibrating the Compass (Mid Line Cluster Only) If the compass appears erratic, inaccurate, or abnormal, you may wish to calibrate it. However, prior to calibrating the compass, make sure the proper Compass Variance value is selected. NOTE: The shift lever must be in PARK to enter the Calibration mode.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 • Compass display, • Outside temperature display, • Trip computer functions, • System status, including vehicle information warning message displays, and Tire Pressure Monitor System (TPMS) displays (if equipped), and, • Personal Settings (customer programmable features).
220 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by pressing the following buttons mounted on the steering wheel. Press and release this button and the mode displayed will change between Compass/ Outside Temperature, Trip Functions, System MENU Status, and Personal Settings. Button Press this button to reset Trip Functions and change Personal Settings.
UNDERSTANDING YOUR INSTRUMENT PANEL Press this button to display Compass/Outside Temperature. the COMPASS/ TEMPERATURE Button Electronic Vehicle Information Center (EVIC) Displays When the appropriate conditions exist, the EVIC displays the following messages: • Turn Signal On (with a continuous warning chime if the vehicle is driven more than 1 mi [1.
222 UNDERSTANDING YOUR INSTRUMENT PANEL • Left Front Low Pressure (with a single chime). Refer to information on “Tire Pressure” and “Tire Pressure Monitor” in Section 5. • Left Rear Low Pressure (with a single chime). Refer to information on “Tire Pressure” and “Tire Pressure Monitor” in Section 5. • Right Front Low Pressure (with a single chime). Refer to information on “Tire Pressure” and “Tire Pressure Monitor” in Section 5. • Right Rear Low Pressure (with a single chime).
UNDERSTANDING YOUR INSTRUMENT PANEL 223 turn off the message temporarily, press and release the MENU button. To reset the oil change indicator system (after performing the scheduled maintenance) perform the following procedure: Trip Functions Press and release the MENU button until one of the following Trip Functions displays in the EVIC: 1. Turn the ignition switch to the ON position (Do not start the engine). • Distance To Empty 2.
224 UNDERSTANDING YOUR INSTRUMENT PANEL The Trip Functions mode displays the following information. • Average Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read “RESET” or show dashes for two seconds. Then, the history information will be erased, and the averaging will continue from the last fuel average reading before the reset.
UNDERSTANDING YOUR INSTRUMENT PANEL • Units In The EVIC, odometer, and navigation system (if equipped) can be changed between English and Metric units of measure. To make your selection, press and release the RESET button until “U.S.” or “METRIC” appears. To Reset The Display Reset will only occur while a resettable function is being displayed. Press and release the RESET button once to clear the resettable function being displayed.
226 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Compass Calibration If the compass appears erratic or is inaccurate, you can calibrate the compass manually by performing the following steps. 1. Turn the ignition switch ON. 2. Press and release the MENU button until Personal Settings displays in the EVIC. 3. Press the SCROLL button until “CALIBRATE COMPASS” displays in the EVIC. 4. Press and release the RESET button to start the calibration. The message “CAL” will display in the EVIC. 5.
UNDERSTANDING YOUR INSTRUMENT PANEL 227 1. Turn the ignition switch ON. 2. Press and release the MENU button until Personal Settings displays in the EVIC. 3. Press the SCROLL button until “COMPASS VARIANCE” message and the last variance zone number displays in the EVIC. 4. Press and release RESET button until the proper variance zone is selected according to the map. 5. Press and release the COMPASS/TEMPERATURE button to exit.
228 UNDERSTANDING YOUR INSTRUMENT PANEL Use the SCROLL button to display one of the following choices. “LANGUAGE” When in this display you may select one of three languages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the RESET button while in this display to select English, French, or Spanish. Then, as you continue, the information will display in the selected language. NOTE: The EVIC will not change the UConnectt language selection.
UNDERSTANDING YOUR INSTRUMENT PANEL “FLASH LAMP WITH LOCK” When ON is selected, the front and rear turn signals will flash when the doors are locked or unlocked with the RKE transmitter. This feature may be selected with or without the sound horn on lock feature selected. To make your selection, press and release the RESET button until “ON” or “OFF” appears.
230 UNDERSTANDING YOUR INSTRUMENT PANEL unlocked with the RKE transmitter. To make your selection, press and hold the RESET button until “Off,” “30 sec,” “60 sec,” or “90 sec” appears. CALIBRATE COMPASS Refer to “Manual Compass Calibration” under “Compass Display.” “DISPLAY UNITS IN” The EVIC, odometer, and navigation system (if equipped) can be changed between English and Metric units of measure. To make your selection, press and release the RESET button until “U.S.” or “METRIC” appears.
UNDERSTANDING YOUR INSTRUMENT PANEL Two Types of Signals There are two basic types of radio signals: AM (Amplitude Modulation), in which the transmitted sound causes the amplitude, or height, of the radio waves to vary; and FM (Frequency Modulation), in which the frequency of the wave is varied to carry the sound. Electrical Disturbance Radio waves may pick up electrical disturbances during transmission. They mainly affect the wave amplitude, and thus remain a part of the AM reception.
232 UNDERSTANDING YOUR INSTRUMENT PANEL under “Personal Settings (Customer Programmable Features)” under “Electronic Vehicle Information Center (EVIC)” in Section 4. SALES CODE REN — MULTIMEDIA SYSTEM — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The REN Multimedia system contains a radio, CD/DVD player, USB port, a 30-gigabyte hard drive (HDD), and a “JukeBox” (virtual CD changer). Sirius Satellite Radio is optional. The 6.5 in (16.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Voice Recognition System (VR) (If Equipped) For the radio, refer to “Voice Recognition System (VR)” in Section 3. For Hands Free Phone Communication (UConnectt) “Voice Recognition System (VR),” refer to “Hands-Free Communication (UConnectt)” in Section 3. Operating Instructions — Hands-Free Communication (UConnectT) (If Equipped) Refer to “Hands-Free Communication (UConnectt)” in Section 3. Clock Setting Procedure Setting the Clock 1.
234 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. Touch the screen where the words “Show Time if Radio is Off” are displayed to change the current setting. 3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” Touch the screen where the words “Daylight Savings” are displayed to change the current setting.
UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. 235 Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio.
236 UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button Pressing the SCAN button causes the tuner to search for the next listenable station, in AM, FM or Satellite (if equipped) frequencies, pausing for five seconds at each listenable station before continuing to the next.
UNDERSTANDING YOUR INSTRUMENT PANEL 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save the time change. 5. To exit, press any button/knob or wait five seconds. The clock can also be set by pressing the SETUP button and selecting the “SET HOME CLOCK” entry.
238 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones. or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information. Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display.
UNDERSTANDING YOUR INSTRUMENT PANEL Program Type News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather 16-Digit Character Display News Nostalga Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R & B Sports Talk Top 40 Weather 239 By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type
240 UNDERSTANDING YOUR INSTRUMENT PANEL • DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current highlighted selection. Use the remote control to scroll up and down the menu (if equipped). • DISC Play/Pause - You can toggle between playing the DVD and pausing the DVD by pushing the SELECT button (if equipped). • Angle – Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if equipped).
UNDERSTANDING YOUR INSTRUMENT PANEL • Set Home Clock - Pressing the SELECT button allows you to set the clock. Turn the TUNE/SCROLL control knob to adjust the hours and then press and turn the TUNE/SCROLL control knob to adjust the minutes. Press the TUNE/SCROLL control knob again to save changes. • Player Defaults - Selecting this item will allow the user to scroll through the following items, and set defaults according to customer preference.
242 UNDERSTANDING YOUR INSTRUMENT PANEL Audio DRC — If Equipped Selecting this item allows you to limit maximum audio dynamic range. The default is set to 9High,9 and under this setting, dialogues will play at 11 db higher than if the setting is 9Normal.9 Aspect Ratio — If Equipped Selecting this item allows you to choose between wide screen, pan scan, and letter box.
UNDERSTANDING YOUR INSTRUMENT PANEL both AM and FM. This allows a total of 12 AM, 12 FM, and 12 Satellite (if equipped) stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 These buttons tune the radio to the stations that you commit to pushbutton memory {12 AM, 12 FM, and 12 Satellite (if equipped) stations}.
244 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The ignition switch must be in the ON or ACC position to operate the radio. LOAD Button — Loading Compact Disc(s) Press the LOAD button and the pushbutton with the corresponding number (1-6) where the CD is being loaded. The radio will display PLEASE WAIT and prompt when to INSERT DISC. After the radio displays 9INSERT DISC,9 insert the CD into the player.
UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (CD MODE) Press the SCAN button to scan through each track on the CD currently playing. TIME Button (CD MODE) Press this button to change the display from a large CD playing time display to a small CD playing time display. RW/FF (CD MODE) Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released, or RW or another CD button is pressed. The RW (Rewind) button works in a similar manner.
246 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum number of directory levels: 8 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator 9.9 and a threecharacter extension) • Level 2: 31 (including a separator 9.9 and a threecharacter extension) Multisession disc formats are supported by the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48 160, 128, 144, 112, 96, 80, 64, 56, 48 MPEG-2 Audio Layer 3 24, 22.05, 16 WMA Specification Sampling Frequency (kHz) Bit Rate (kbps) WMA 44.1 and 48 48, 64, 96, 128, 160, 192 VBR ID3 Tag information for artist, song title, and album title are supported for ID3 version 1 tags.
248 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. 249 Operating Instructions — Voice Recognition System (VR) (If Equipped) For the radio, refer to “Voice Recognition System (VR)” in Section 3. For UConnectt “Voice Recognition System (VR),” refer to “Hands-Free Communication (UConnectt)” in Section 3. TIME Button (Auxiliary Mode) Press the TIME button to change the display from elapsed playing time to time of day.
250 UNDERSTANDING YOUR INSTRUMENT PANEL Dolbyt Manufactured under license from Dolbyt Laboratories. 9Dolbyt9 and the double-D symbol are trademarks of Dolbyt Laboratories. SALES CODE RES — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Macrovision This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the On/Volume control knob to turn on the radio. Push the On/Volume control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping.
252 UNDERSTANDING YOUR INSTRUMENT PANEL If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped With UConnect” message will display on the radio screen. Phone Button (UConnectt Hands-Free Phone) — If Equipped Press this button to operate the Hands-Free Phone (UConnectt) feature (if equipped). Refer to “Hands-Free Communication (UConnectt)” in Section 3.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text message broadcast from an FM station (FM mode only). Push the rotary Tune/Scroll control knob a second time and MID will display. Turn the Tune/Scroll control knob to the right or left to increase or decrease the mid-range tones.
254 UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the Tune/Scroll control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Top 40 Weather 16-Digit Character Display Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station.
256 UNDERSTANDING YOUR INSTRUMENT PANEL stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC Button Pressing the DISC button will allow you to switch from AM/FM modes to Disc modes.
UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player. Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player.
258 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display. RW/FF Press the RW button to stop the CD at the beginning of the current CD track/title. Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner.
UNDERSTANDING YOUR INSTRUMENT PANEL files properly and may be unable to play the file normally. UDF and Apple HFS formats are not supported. The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead.
260 UNDERSTANDING YOUR INSTRUMENT PANEL rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specification Sampling Frequency (kHz) MPEG-1 Audio Layer 3 48, 44.1, 32 MPEG-2 Audio Layer 3 24, 22.
UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the Tune/Scroll control knob. Selecting a folder by pressing the Tune/Scroll control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
262 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when ignition is OFF). Operating Instructions - Hands-Free Phone (UConnectt) (If Equipped) Refer to “Hands-Free Communication (UConnectt)” in Section 3. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio” in this section.
UNDERSTANDING YOUR INSTRUMENT PANEL a remote color screen to provide maps, turn identification, selection menus, and instructions for selecting a variety of destinations and routes. A shared HDD for the navigation system, the database, and other radio features allows uploads of music and photos from CDs or through the USB port. The Gracenote database finds the artist, track, and title for the music.
264 UNDERSTANDING YOUR INSTRUMENT PANEL Changing the Time Zone NOTE: You can skip Steps 2 and 3 by pressing and holding the “TIME” button on the radio for three seconds. 1. Turn on the multimedia system. 2. Press and release the “SETUP” button on the radio. 3. If “Time Setup” is highlighted on the menu, press and release the joystick in the center of the radio. Otherwise, turn the knob surrounding the joystick to select “Time Setup,” and then press and release the joystick. 4.
UNDERSTANDING YOUR INSTRUMENT PANEL turn the knob surrounding the joystick to select “Time Setup,” and then press and release the joystick. 4. Turn the knob surrounding the joystick to scroll to “Daylight Savings,” and then press and release the joystick. 5. If the desired setting has a check mark next to it, proceed to the next step. Otherwise, turn the knob surrounding the joystick to select “Off” or “On,” and then press and release the joystick. A check mark will display next to the selection. 6.
266 UNDERSTANDING YOUR INSTRUMENT PANEL 6. Turn the knob surrounding the joystick to set the hour highlighted on the clock on the screen. Press and release the joystick when done. 7. Turn the knob surrounding the joystick to select “Set Minutes,” and then press and release the joystick. 8. Turn the knob surrounding the joystick to set the minutes highlighted on the clock on the screen. Press and release the joystick when done. 9. Press and release the “SETUP” button to exit the screen.
UNDERSTANDING YOUR INSTRUMENT PANEL SATELLITE RADIO — IF EQUIPPED (REN/REQ/RER/RES/REU RADIOS ONLY) Satellite radio uses direct satellite-to-receiver broadcasting technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio. This service offers over 130 channels of music, sports, news, entertainment, and programming for children, directly from its satellites and broadcasting studios.
268 UNDERSTANDING YOUR INSTRUMENT PANEL Sirius ID number will display. The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen. ESN/SID Access With REN/RER Radios While in SAT mode, press the MENU button on the radio faceplate. Next, touch the SUBSCRIPTION tab on the touch screen. All the ESNs that apply to your vehicle will display. ESN/SID Access With REU Radio While in SAT mode, press the MENU button on the radio faceplate.
UNDERSTANDING YOUR INSTRUMENT PANEL • Dense tree coverage may interrupt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage. Operating Instructions - Satellite Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. SEEK Buttons Press and release the SEEK buttons to search for the next channel in Satellite mode.
270 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arrows. TUNE Control (Rotary) Turn the rotary Tune/Scroll control knob clockwise to increase or counterclockwise to decrease the channel. MUSIC TYPE Button — Except REU Radio Pressing this button once will turn on the Music Type mode for five seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number. This number is used to activate, deactivate, or change the Sirius subscription. SET Button – To Set the Pushbutton Memory When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. The symbol SET 1 will now show in the display window. Select the button (1-6) you wish to lock onto this channel and press and release that button.
272 UNDERSTANDING YOUR INSTRUMENT PANEL VIDEO ENTERTAINMENT SYSTEM — IF EQUIPPED The optional Video Entertainment System (VES)t includes the following components for rear seat entertainment: • A diagonal 8 in (20 cm) Liquid Crystal Display (LCD) screen integrated into the center overhead console. The screen features brightness control for optimum daytime and nighttime viewing. • The LCD Screen swings down from the console to allow the rear seat passenger(s) to view the display.
UNDERSTANDING YOUR INSTRUMENT PANEL • Two wireless infrared headsets allow rear seat passengers to listen to the same or individual audio sources. Audio/Video RCA Jacks (AUX Jacks) on the rear of the center console enable the monitor to display video directly from a video camera, connect video games for display on the screen, or play music directly from an MP3 player. 1. Video in (yellow) 2. Left audio in (white) 3.
274 UNDERSTANDING YOUR INSTRUMENT PANEL • the iPodt battery charges when plugged into the UCI connector. Connecting The iPodT Device Use the optional connection cable to connect an iPodt to the vehicle’s UCI connector (which is located in the glove box or center console on some vehicles. This location may vary with vehicle).
UNDERSTANDING YOUR INSTRUMENT PANEL RW (Rewind) Button Press and hold the RW button to move backward in the current track. Holding the RW button long enough will take you back to the beginning of the current track. Pressing and releasing the RW button will go back five seconds of the current track. FF (Fast Forward) Button Press and hold the FF button to move forward in the current track. Pressing and releasing the FF button will go forward five seconds of the current track.
276 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button Pressing the SCAN button will play the first five seconds of each track in the current list and then forward to the next song. To stop the SCAN mode and start playing the desired track, press the SCAN button again. During the SCAN mode, you can also press the SEEK button to the left or right to go to the previous or next tracks.
UNDERSTANDING YOUR INSTRUMENT PANEL Radio Preset Buttons In the List mode, the radio preset buttons are used as shortcuts to the following lists on the iPodt device. • 1 – Playlists • 2 – Artists • 3 – Albums • 4 – Genres • 5 - Audiobooks • 6 – Podcasts After pressing a preset button, you will see the list you are in on the top line and the first item in that list on the second line. To exit the List mode without selecting a track, press the same preset button again to go back to Play mode.
278 UNDERSTANDING YOUR INSTRUMENT PANEL REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. The left- and right-hand controls are rocker-type switches with a pushbutton in the center of each switch. Reach behind the steering wheel to access the switches. Right-Hand Switch Functions • Press the top of the switch to increase the volume. • Press the bottom of the switch to decrease the volume.
UNDERSTANDING YOUR INSTRUMENT PANEL Left-Hand Switch Functions for Media (i.e., CD) Operation • Press the top of the switch once to listen to the next track. • Press the bottom of the switch once either to listen to the beginning of the current track or to listen to the beginning of the previous track if it is within one second after the current track begins to play. • Press the switch up or down twice to listen to the second track, three times to listen to the third track, and so forth.
280 UNDERSTANDING YOUR INSTRUMENT PANEL 8. Do not play discs that are small in size or have irregular shapes. RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being on in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL General Climate Control Functions — All Systems Blower Control Use this control to regulate the amount of air forced through the ventilation system in any mode. Temperature Control Use this control to regulate the temperature of the air inside the cabin. Air Conditioning (A/C) Control Use this control to engage and disengage the A/C. NOTE: • The A/C compressor will not engage until the engine has been running for about 10 seconds.
282 UNDERSTANDING YOUR INSTRUMENT PANEL • Bi-Level Air is directed through the panel and floor outlets. For vehicles equipped with a three-zone system, air is also directed through the outlets in the headliner, unless the climate control for the rear passengers is ON and in Floor mode. NOTE: For all settings except full cold or full hot, there is a difference in temperature between the upper and lower outlets. The warmer air flows to the floor outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL • Defrost Air is directed through the windshield and side window demist outlets. For vehicles equipped with a three-zone system, air is directed through the floor outlet in the right quarter trim panel, unless the climate control for the rear passengers is ON and in Panel mode. NOTE: Use this mode with maximum blower and temperature settings for best windshield and side window defrosting.
284 UNDERSTANDING YOUR INSTRUMENT PANEL Single-Zone Manual Air Conditioning and Heating System 2. Temperature Control Turn left for cooler or right for warmer temperature settings. 3. Mode Control Turn to select either a primary mode as identified by the symbols on the control, or a blend of two of these modes. The closer the setting is to a particular symbol, the more air distribution you receive from that mode. See Note 1 and 2 4.
UNDERSTANDING YOUR INSTRUMENT PANEL 6. Recirculation Mode Control Press and release to change the current setting. The indicator illuminates when ON. Note 1 - The A/C compressor operates in Mix and Defrost, or a blend of these modes, even if the A/C control is not pressed. This dehumidifies the air to help dry the windshield. To improve fuel economy, use these modes only when necessary.
286 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Panel Mode Button Press and release to select. The indicator illuminates when selected. 3. Bi-Level Mode Button Press and release to select. The indicator illuminates when selected. 4. Front Blower Control The blower speed increases as you move the control to the right from the “O” (Off) position. There are four blower speeds. 7. Right Front Temperature Control Provides right front seat occupant with independent temperature control.
UNDERSTANDING YOUR INSTRUMENT PANEL 287 1. RR Control Turns the climate control in the overhead console above the second row passenger seats ON and OFF. Press and release to change the current setting. 2. Rear Blower Control The blower speed increases as you move the control to the right from the “O” (Off) position. There are three blower speeds. Rear-Zone Manual Climate Control 3. Rear Temperature Control Provides independent temperature control for the rear cabin.
288 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Rear Blower Control The blower speed increases as you move the control to the right from the “O” (Off) position. There are three blower speeds. 2. Rear Temperature Control Provides rear seat occupants with independent temperature control. Turn left for cooler or right for warmer temperature settings in the rear cabin.
UNDERSTANDING YOUR INSTRUMENT PANEL Two- and Three-Zone Automatic Temperature Control (ATC) Systems — If Equipped 289 2. Left Front Temperature Control Provides left front seat occupant with independent temperature control. Turn left for cooler or right for warmer temperature settings. 3. Display Screen Shows the current blower speed, mode, and temperature settings, and it will display an indicator when Recirculation mode is ON and when the A/C is ON. 4.
290 UNDERSTANDING YOUR INSTRUMENT PANEL 7. Mode Button Press the DOWN or UP arrow to change the mode of air distribution to Floor, Panel, Bi-Level, or Mix. 8. Electric Rear Window Defroster Button Refer to “Rear Window Features” in Section 3 for more information. Note 1 - To prevent window fogging, Recirculation Mode will not operate when either Defrost or Mix mode is selected. Doing so will cause the indicator to blink and then turn OFF. 9. Defrost Mode Button Press and release to select.
UNDERSTANDING YOUR INSTRUMENT PANEL 2. Left Front Temperature Control Provides left front seat occupant with independent temperature control. Turn left for cooler or right for warmer temperature settings. 3. Display Screen Shows the current blower speed, mode, and temperature settings, and it will display an indicator when the A/C is ON. 291 release to select. Refer to “Automatic Operation — Twoand Three-Zone ATC” for more information. 7.
292 UNDERSTANDING YOUR INSTRUMENT PANEL Note 1 - To prevent window fogging, Recirculation Mode will not operate when either Defrost or Mix mode is selected. Doing so will cause the indicator to blink and then turn OFF. 2. Rear Temperature Control Provides independent temperature control for the rear cabin. Turn left for cooler or right for warmer temperature settings in the rear cabin. 3.
UNDERSTANDING YOUR INSTRUMENT PANEL 293 2. Rear Blower Control The blower speed increases as you move the control to the right from the “O” (Off) position. There are 10 blower speeds. 3. Rear Temperature Control Provides rear seat occupants with independent temperature control. Turn left for cooler or right for warmer temperature settings in the rear cabin. Rear-Zone ATC The Rear-Zone ATC for the rear passengers is in the overhead console above the second row passenger seats. 1.
294 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Operation — Two- and Three-Zone ATC The Two- and Three-Zone ATC systems automatically maintain the climate in the cabin of the vehicle. To accomplish this, the system gathers information from the climate controls, from a dual sun-sensor located in the top of the instrument panel, from an infrared sensor located between the sun visors, and from various sensors located throughout the vehicle.
UNDERSTANDING YOUR INSTRUMENT PANEL the Left Front Temperature Control to dial in the temperature that you want the system to maintain for all three zones. Once the comfort level is selected, the system will maintain that level automatically using the heating system. Should the desired comfort level require A/C, the system will automatically make the adjustment. You will experience the greatest efficiency by simply allowing the system to function automatically.
296 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips NOTE: Refer to the chart at the end of this section for suggested control settings for various weather conditions. Summer Operation The engine cooling system in air-conditioned vehicles must be protected with a high-quality antifreeze coolant to provide proper corrosion protection and to protect against engine overheating.
UNDERSTANDING YOUR INSTRUMENT PANEL Side Window Demisters A side window demister outlet is located at each end of the instrument panel. These non-adjustable outlets direct air toward the side windows when the system is in the Floor, Mix, or Defrost mode. The air is directed at the area of the windows through which you view the outside mirrors. Outside Air Intake Make sure the air intake, located directly in front of the windshield, is free of obstructions such as leaves.
298 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions
STARTING AND OPERATING CONTENTS m Starting Procedures . . . . . . . . . . . . . . . . . . . . . 303 m Automatic Transaxle . . . . . . . . . . . . . . . . . . . . . 306 ▫ Automatic Transaxle . . . . . . . . . . . . . . . . . . . 304 ▫ Brake/Transaxle Interlock System . . . . . . . . . . 307 ▫ Normal Starting (Tip Start) . . . . . . . . . . . . . . 304 ▫ Automatic Transaxle Ignition Interlock System . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
300 STARTING AND OPERATING m All Wheel Drive (AWD) — If Equipped . . . . . . . 314 ▫ Electronic Roll Mitigation (ERM) . . . . . . . . . . 326 m Driving On Slippery Surfaces . . . . . . . . . . . . . . 315 ▫ Electronic Stability Program (ESP) . . . . . . . . . 327 ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . . . . . 315 ▫ ESP/BAS Warning Light And ESP/TCS Indicator Light . . . . . . . . . . . . . . . . . . . . . . . 329 ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING m Tire Pressure Monitor System (TPMS) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350 ▫ Base System — If Equipped . . . . . . . . . . . . . . 353 ▫ Premium System — If Equipped . . . . . . . . . . 355 ▫ General Information . . . . . . . . . . . . . . . . . . . 358 m Flexible Fuel— 2.7L Engines Only (Except California Emission States) . . . . . . . . . . 359 ▫ E-85 General Information . . . . . . . . . . . . . . . . 359 ▫ Ethanol Fuel (E-85) . . . . . . . . .
302 STARTING AND OPERATING m Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 367 ▫ Common Towing Definitions . . . . . . . . . . . . . 372 ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . . . 367 ▫ Trailer Hitch Classification . . . . . . . . . . . . . . . 376 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . . 369 ▫ Trailer Towing Weights (Maximum Trailer Weight Ratings) . . . . . . . . . . . . . . . . . . . . . . 377 m Vehicle Loading . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. 303 WARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the key in the ignition.
304 STARTING AND OPERATING Automatic Transaxle The shift lever must be in the NEUTRAL or PARK position before you can start the engine. Apply the brakes before shifting into any driving gear. CAUTION! Damage to the transaxle may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
STARTING AND OPERATING If Engine Fails To Start WARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury. • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transaxle cannot be started this way.
306 STARTING AND OPERATING After Starting The idle speed is controlled automatically and it will decrease as the engine warms up. ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded, three-wire extension cord.
STARTING AND OPERATING WARNING! • It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal. • Unintended movement of a vehicle could injure those in and near the vehicle.
308 STARTING AND OPERATING 4. Insert a screwdriver or similar small tool into the hole at the front of the cubby bin and push the manual override release lever forward. may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers). 5. While holding the release lever forward, move the shift lever from PARK to NEUTRAL. 6. Release the manual override.
STARTING AND OPERATING Gear Ranges PARK PARK supplements the parking brake by locking the transaxle. The engine can be started in this range. Never attempt to use PARK while vehicle is in motion. Apply parking brake when leaving vehicle in this range. When parking on a flat surface, place the shift lever in the PARK position first, and then apply the parking brake.
310 STARTING AND OPERATING NEUTRAL The engine may be started in this range. WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have an accident. DRIVE — 6-Speed Transaxle This range should be used for most city and highway driving. It provides the smoothest upshifts, downshifts, and best fuel economy.
STARTING AND OPERATING in this range. The “3” (Drive) range should also be used when descending steep grades to prevent brake system distress. NOTE: Using the “3” (Drive) range while operating the vehicle under heavy operating conditions will improve performance and extend transaxle life by reducing excessive shifting and heat build up. “L” (Low) — 4-Speed Transaxle This range should be used for engine braking when descending very steep grades.
312 STARTING AND OPERATING PARK, REVERSE, and NEUTRAL will continue to operate. This Reset feature allows the vehicle to be driven to an authorized dealer for service without damaging the transaxle. In the event of a momentary problem, the transaxle can be reset to regain all forward gears by performing the following steps: 1. Stop the vehicle. 2. Shift into PARK. 3. Turn the ignition switch to the LOCK position. 4. Restart the engine. 5. Shift into the desired gear range and resume driving.
STARTING AND OPERATING 313 AutoStickT Operation By placing the shift lever one shift-level below the DRIVE position, it can be moved from side to side. This allows the driver to select a higher or lower range of gears. Moving the shift lever to the Left (-) triggers a downshift and to the Right (+) an upshift. The gear position will display in the instrument cluster on the transaxle range indicator.
314 STARTING AND OPERATING • If a low range is selected and the engine accelerates to the rev limit, the transaxle will automatically select the next higher ratio. • If a downshift would cause the engine to over-speed, that shift will not occur until it is safe for the engine. Mostly the transaxle will stay in the manually selected ratio, however: − If the system detects powertrain overheating, the transaxle will revert to the automatic shift mode and remain in that mode until the powertrain cools off.
STARTING AND OPERATING 315 CAUTION! WARNING! All wheels must have the same size and type tires. Unequal tire sizes must not be used. Unequal tire size may cause failure of the power transfer unit. Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. You could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow, wet, mud, loose sand, etc.).
316 STARTING AND OPERATING 2. Slow down if the road has standing water or puddles. 3. Replace the tires when tread wear indicators first become visible. 4. Keep the tires properly inflated. 5. Maintain enough distance between your vehicle and the vehicle in front of you to avoid a collision in a sudden stop. DRIVING THROUGH WATER Driving through water more than a few inches/ centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle.
STARTING AND OPERATING 317 CAUTION! CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e.
318 STARTING AND OPERATING WARNING! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. PARKING BRAKE The parking brake should always be applied when the driver is not in the vehicle. WARNING! • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances.
STARTING AND OPERATING 319 When parking on a hill, it is important to apply the parking brake before placing the shift lever in PARK, otherwise the load on the transaxle locking mechanism may make it difficult to move the shift lever out of PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. The foot operated parking brake is positioned below the lower left corner of the instrument panel.
320 STARTING AND OPERATING The Brake System Warning Light in the instrument cluster will turn on when the parking brake is applied and the ignition switch is on. NOTE: This light only shows that the parking brake is applied. It does not show the degree of brake application. CAUTION! If the Brake System Warning Light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately.
STARTING AND OPERATING BRAKE SYSTEM Your vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability, the remaining system will still function. However, there will be some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and greater pedal force required to slow or stop the vehicle.
322 STARTING AND OPERATING Anti-Lock Brake System (ABS) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressure to prevent wheel lock-up to help avoid skidding on slippery surfaces during braking. Refer to “Anti-Lock Brake System (ABS)” under “Electronic Brake Control System” in this section for more information.
STARTING AND OPERATING 323 ELECTRONIC BRAKE CONTROL SYSTEM Your vehicle is equipped with an advanced electronic brake control system commonly referred to as ESP. This system includes Anti-Lock Brake System (ABS), Brake Assist System (BAS), Traction Control System (TCS), Electronic Roll Mitigation (ERM), and Electronic Stability Program (ESP). These systems work together to enhance both vehicle stability and control in various driving conditions. working properly.
324 STARTING AND OPERATING WARNING! • The ABS contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability. Installation of such equipment should be performed by qualified professionals. • Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to an accident. Pumping makes the stopping distance longer.
STARTING AND OPERATING If both the Brake System Warning Light and the ABS Light remain on, the ABS and Electronic Brake Force Distribution (EBD) systems are not functioning. Immediate repair to the ABS system is required. Brake Assist System (BAS) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sensing the rate and amount of brake application and then applies optimum pressure to the brakes.
326 STARTING AND OPERATING Traction Control System (TCS) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. A feature of the TCS functions similar to a limited slip differential and controls the wheel spin across a driven axle.
STARTING AND OPERATING WARNING! Many factors, such as vehicle loading, road conditions, and driving conditions, influence the chance that wheel lift or rollover may occur. ERM cannot prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles. Only a safe, attentive, and skillful driver can prevent accidents.
328 STARTING AND OPERATING active. The ESP/TCS Indicator Light also flashes when TCS is active. If the ESP/TCS Indicator Light begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. WARNING! ESP cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions.
STARTING AND OPERATING ESP OFF Button NOTE: To improve the vehicle’s traction when driving with snow chains, or when starting off in deep snow, sand, or gravel, it may be desirable to switch to the “Partial Off” mode by momentarily depressing the ESP OFF button. Once the situation requiring “Partial Off” mode is overcome, turn ESP back on by momentarily depressing the ESP OFF button. This may be done while the vehicle is in motion.
330 STARTING AND OPERATING NOTE: • 9The ESP/TCS Indicator Light and the ESP/BAS Malfunction Indicator Light will turn on momentarily each time the ignition switch is turned ON. NOTE: The TSC is disabled when the ESP system is in the “Partial Off” mode. • Each time the ignition is turned ON, the ESP System will be ON even if it was turned off previously. • TSC cannot stop all trailers from swaying. Always use caution when towing a trailer and follow the tongue weight recommendations.
STARTING AND OPERATING POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these conditions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers.
332 STARTING AND OPERATING TIRE SAFETY INFORMATION TIRE MARKINGS • European-Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter 9P9 is absent from this tire size designation. Example: 215/65R15 96H. • LT (Light Truck) - Metric tire sizing is based on U.S. design standards.
STARTING AND OPERATING 333 Tire Sizing Chart TIRE SIZING TERMS Size Designation: P = Passenger Car tire size based on U.S. design standards (....blank....( = Passenger Car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%) — Ratio of section height to section width of tire 10.
334 STARTING AND OPERATING TIRE SIZING TERMS Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
STARTING AND OPERATING TIRE IDENTIFICATION NUMBER (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. 335 Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
336 STARTING AND OPERATING TIRE LOADING AND TIRE PRESSURE Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side B-Pillar.
STARTING AND OPERATING Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard and in the “Vehicle Loading” section of this manual.
338 STARTING AND OPERATING 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle.
STARTING AND OPERATING 339 5
340 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. 1. Safety— WARNING! •Improperly inflated tires are dangerous and can cause accidents. •Under-inflation increases tire flexing and can result in tire failure.
STARTING AND OPERATING WARNING! •Unequal tire pressures can cause steering problems. You could lose control of your vehicle. •Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. •Always drive with each tire inflated to the recommended cold tire inflation pressure. 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread.
342 STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Tire Placard Location The pressure should be checked and adjusted as well as inspecting for signs of tire wear or visible damage at least once a month. Use a good quality pocket-type gauge to check tire pressure.
STARTING AND OPERATING Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the Winter. Example: If garage temperature = 68°F (20°C) and the outside temperature = 32°F (0°C) then the cold tire inflation pressure should be increased by 3 psi (21 kPa), which equals 1 psi (7 kPa) for every 12°F (7°C) for this outside temperature condition.
344 STARTING AND OPERATING Radial Ply Tires WARNING! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly. The instability could cause an accident. Always use radial ply tires in sets of four (or six, in case of trucks with dual rear wheels). Never combine them with other types of tires. Cuts and punctures in radial tires are repairable only in the tread area because of sidewall flexing. Consult your authorized tire dealer for radial tire repairs.
STARTING AND OPERATING DO NOT install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare. DO NOT install more than one compact spare tire/wheel on the vehicle at any given time. CAUTION! Because of the reduced ground clearance, DO NOT take your vehicle through an automatic car wash with the compact spare installed. Damage to the vehicle may result.
346 STARTING AND OPERATING Tire Spinning When stuck in mud, sand, snow, or ice conditions, DO NOT spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck. Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. For additional information, refer to “Freeing A Stuck Vehicle” in Section 6. WARNING! Fast spinning tires can be dangerous.
STARTING AND OPERATING Many states have laws requiring tire replacement at this point. Life of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have an accident resulting in serious injury or death.
348 STARTING AND OPERATING WARNING! WARNING! DO NOT use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have an accident resulting in serious injury or death.
STARTING AND OPERATING Alignment And Balance Poor suspension alignment may result in: • Fast tire wear. • Uneven tire wear, such as feathering and one-sided wear. • Vehicle pull to right or left. Tires may also cause the vehicle to pull to the left or right. Alignment will not correct this condition. See your authorized dealer for proper diagnosis. Improper alignment will not cause vehicle vibration. Vibration may be a result of tire and wheel out-ofbalance.
350 STARTING AND OPERATING SNOW TIRES Some areas of the country require the use of snow tires during the winter. Standard tires are of the all season type and satisfy this requirement as indicated by the M+S designation on the tire sidewall. TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED If you need snow tires, select tires equivalent in size and type to the original equipment tires. Use snow tires only in sets of four. Failure to do so may adversely affect the safety and handling of your vehicle.
STARTING AND OPERATING 351 The tire pressure will also increase as the vehicle is driven. This is normal and there should be no adjustment for this increased pressure. may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. • The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire.
352 STARTING AND OPERATING CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, and the TPMS will monitor the actual tire pressure in the tire. Base System — If Equipped The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the receiver module.
354 STARTING AND OPERATING will repeat, providing the system fault still exists. The Tire Pressure Monitoring Telltale light will turn off when the fault condition no longer exists. A system fault can occur due to any of the following: NOTE: 1. The compact spare tire does not have a tire pressure monitoring sensor. Therefore, the TPMS will not monitor the pressure in the compact spare tire. 1.
STARTING AND OPERATING 5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically and the TPMS Telltale light will turn off, as long as no tire pressure is below the low-pressure warning limit in any of the four active road tires. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information.
356 STARTING AND OPERATING Electronic Vehicle Information Center (EVIC) will display a graphic showing the pressure values of each tire with the low tire pressure values flashing. Should this occur, you should stop as soon as possible and inflate the tires with low pressure (those flashing in the EVIC graphic) to the vehicle’s recommended cold placard pressure value.
STARTING AND OPERATING 357 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPMS sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Lots of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPMS sensors. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists.
358 STARTING AND OPERATING light will remain on and a chime will sound. In addition, the graphic in the EVIC will still display a flashing pressure value. 3. After driving the vehicle for up to 10 minutes above 15 mph (25 km/h), the TPMS Telltale light will flash on and off for 75 seconds and then remain on solid. In addition, the EVIC will display a 9CHECK TPM SYSTEM9 message for three seconds and then display dashes (- -) in place of the pressure value. 4.
STARTING AND OPERATING 359 The tire pressure sensors are covered under one of the following licenses: United States . . . . . . . . . . . . . . . . . . . . . KR5S120123 Canada . . . . . . . . . . . . . . . . . . . . . . . . 2671-S120123 FLEXIBLE FUEL— 2.7L ENGINES ONLY (EXCEPT CALIFORNIA EMISSION STATES) E-85 GENERAL INFORMATION The information in this section is for Flexible Fuel vehicles only. This section only covers those subjects that are unique to these vehicles.
360 STARTING AND OPERATING Along with the special E-85 fuel filler cap, your vehicle may display a badge, which also indicates it can operate on E-85. ETHANOL FUEL (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smoking materials lit in or near the vehicle when removing the fuel filler tube cap (gas cap) or filling the tank.
STARTING AND OPERATING 361 For best results, a refueling pattern that avoids alternating between E-85 and unleaded gasoline is recommended. ENGINE BLOCK HEATER (IF EQUIPPED) Block heater usage is beneficial for E-85 startability when the ambient temperature is less than 32°F (0°C). When you do switch fuel types it is recommended that: SELECTION OF ENGINE OIL FOR FLEXIBLE FUEL VEHICLES (E-85) AND GASOLINE VEHICLES FFV vehicles operated on E85 require specially formulated engine oils.
362 STARTING AND OPERATING STARTING The characteristics of E-85 fuel make it unsuitable for use when ambient temperatures fall below 0°F (-18°C). In the range of 0°F (-18°C) to 32°F (0°C), you may experience an increase in the time it takes for your engine to start, and a deterioration in driveability (sags and/or hesitations) until the engine is fully warmed up. CRUISING RANGE Because E-85 fuel contains less energy per gallon than gasoline, you will experience an increase in fuel consumption.
STARTING AND OPERATING FUEL REQUIREMENTS 2.4L and 2.7L Engines 2.4L and 2.7L Engines are designed to meet all emissions regulations and provide excellent fuel economy and performance when using high-quality unleaded “regular” gasoline having an octane rating of 87. The use of premium gasoline is not recommended. Under normal conditions, the use of premium gasoline will not provide a benefit over high-quality unleaded regular gasolines, and in some circumstances may result in poorer performance. 363 3.
364 STARTING AND OPERATING as hard starting, stalling, and hesitations. If you experience these symptoms, try another brand of gasoline before considering service for the vehicle. Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the World Wide Fuel Charter, WWFC) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle.
STARTING AND OPERATING CAUTION! For vehicles equipped with a 2.4L or 3.5L engine, DO NOT use gasoline containing Methanol or E85 Ethanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system components. NOTE: The 2.7L engine is now rated for E85 Ethanol use (EXCEPT CALIFORNIA EMISSION STATES). Only vehicles with the E-85 fuel filler door label can operate on E-85. For more information, refer to “Flexible Fuel” in this section.
366 STARTING AND OPERATING Materials Added to Fuel All gasoline sold in the United States is required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefore, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law.
STARTING AND OPERATING Carbon Monoxide Warnings WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
368 STARTING AND OPERATING CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the Malfunction Indicator Light (MIL) to turn on. Fuel Filler Cap (Gas Cap) NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler door reinforcement.
STARTING AND OPERATING WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. • Failure to follow this warning may result in serious injury or death. NOTE: • Tighten the gas cap until you hear a “clicking” sound.
370 STARTING AND OPERATING VEHICLE LOADING The load carrying capacity of your vehicle is shown on the “Vehicle Certification Label.” This information should be used for passenger and luggage loading as indicated. Do not exceed the specified Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Vehicle Certification Label Your vehicle has a Vehicle Certification Label affixed to the rear of the driver’s door.
STARTING AND OPERATING WARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have an accident. Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and the front and rear GAWR.
372 STARTING AND OPERATING A loaded vehicle is shown in the illustration. Note that neither the GVWR nor the GAWR capacities have been exceeded.
STARTING AND OPERATING Gross Trailer Weight (GTW) The Gross Trailer Weight (GTW) is the weight of the trailer plus the weight of all cargo, consumables, and equipment (permanent or temporary) loaded in or on the trailer in its 9loaded and ready for operation9 condition. The recommended way to measure GTW is to put your fully loaded trailer on a vehicle scale. The entire weight of the trailer must be supported by the scale.
374 STARTING AND OPERATING Frontal Area Frontal area is the maximum height and maximum width of the front of a trailer. of hitches are the most popular on the market today and they are commonly used to tow small- and mediumsized trailers. Trailer Sway Control — Electronic Refer to “TSC (Trailer Sway Control)” under “Electronic Brake Control System” in this section for information on this system.
STARTING AND OPERATING 375 WARNING! • An improperly adjusted weight distributing hitch system may reduce handling, stability, braking performance, and could result in an accident. • Weight distributing systems may not be compatible with surge brake couplers. Consult with your hitch and trailer manufacturer or a reputable recreational vehicle dealer for additional information.
376 STARTING AND OPERATING The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Improper Adjustment of Weight Distributing System Trailer Hitch Classification Your vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional Trailer Tow Prep Package.
STARTING AND OPERATING 377 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transaxle 2.4L Automatic GCWR (Gross Combined Wt. Rating) 6,000 lbs (2,722 kg) 7,300 lbs (3,311 kg) 2.7L/3.5L (with out Trailer Tow Prep 7,300 lbs (3,311 kg) Package (AHT) 7,300 lbs (3,311 kg) 2.7L (with Trailer 8,300 lbs (3,765 kg) Tow Prep Package (AHT) 8,300 lbs (3,765 kg) Frontal Area 22 sq ft (2.
378 STARTING AND OPERATING Engine/Transaxle GCWR (Gross Combined Wt. Rating) 8,300 lbs (3,765 kg) 8,300 lbs (3,765 kg) 3.5L (with Trailer Tow Prep Package 8,300 lbs (3,765 kg) (AHT) Frontal Area 40 sq ft (3.7 sq m) 40 sq ft (3.7 sq m) Max. GTW (Gross Trailer Wt.) 3,500 lbs (1,588 kg) which includes 1 to 2 persons & Luggage 3,000 lbs (1,361 kg) which includes 3 to 4 persons & Luggage Max. Tongue Wt.
STARTING AND OPERATING 379 Trailer and Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of the vehicle and trailer. Failure to load trailers heavier in front is the cause of many trailer accidents.
380 STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or authorized dealer-installed options must be considered as part of the total load on your vehicle. Refer to the “Tire and Loading Information” placard for the maximum combined weight of occupants and cargo for your vehicle.
STARTING AND OPERATING WARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and that it will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have an accident.
382 STARTING AND OPERATING 4. Tongue weight rating for the trailer hitch utilized. (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight.) Towing Requirements — Tires − Do not attempt to tow a trailer while using a compact spare tire. − Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING − An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. − Trailer brakes are recommended for trailers over 1,000 lbs (454 kg) and required for trailers in excess of 2,000 lbs (907 kg). 383 WARNING! Do not connect trailer brakes to your vehicle’s hydraulic brake lines.
384 STARTING AND OPERATING The Trailer Tow Package may include a 4- and 7-pin wiring harness. Use a factory approved trailer harness and connector. NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations.
STARTING AND OPERATING 385 Towing Tips — Automatic Transaxle The DRIVE range can be selected when towing. However, if frequent shifting occurs while in this range, select the “3” range for 4-speed automatic or the “5” range for 6-speed automatic. NOTE: Using the “3” or “5” range while operating the vehicle under heavy operating conditions will improve performance and extend transaxle life by reducing excessive shifting and heat build up. This action will also provide better engine braking.
386 STARTING AND OPERATING NOTE: Check the 4-speed automatic transaxle fluid level before towing. The 6-speed transaxle is sealed and the fluid level cannot be checked. See your authorized dealer for assistance. Towing Tips — Electronic Speed Control (If Equipped) − Don’t use in hilly terrain or with heavy loads. − When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed.
STARTING AND OPERATING Towing Tips — Cooling System To reduce potential for engine and transaxle overheating, take the following actions: 387 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) − City Driving When stopped for short periods, put transaxle in NEUTRAL and increase engine idle speed. TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat Towing With All Four Wheels On The Ground) Recreational towing for this vehicle is not recommended. − Highway Driving Reduce speed.
WHAT TO DO IN EMERGENCIES CONTENTS m Hazard Warning Flasher . . . . . . . . . . . . . . . . . . 390 ▫ Jacking Instructions . . . . . . . . . . . . . . . . . . . . 398 m If Your Engine Overheats . . . . . . . . . . . . . . . . . 390 m Jump-Starting Procedures . . . . . . . . . . . . . . . . . 404 ▫ Engine Oil Overheating — 2.4L Gas And 2.0L Diesel Engines Only (If Equipped) . . . . . . 392 m Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . . 408 m Jacking And Tire Changing . . . . . . . . . .
390 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The HAZARD switch is located in the instrument panel switch bank above the climate controls. Push and release the switch to turn on the hazard warning flashers. When the hazard warning is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Push and release the switch a second time to turn off the flashers. This is an emergency warning system and it should not be used when the vehicle is in motion.
WHAT TO DO IN EMERGENCIES heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads “H,” safely pull over and stop the vehicle. Idle the vehicle with the A/C turned off until the pointer drops back into the normal range. If the pointer remains on the “H,” and you hear continuous chimes, turn the engine OFF immediately, and call for service.
392 WHAT TO DO IN EMERGENCIES Engine Oil Overheating — 2.4L Gas and 2.0L Diesel Engines Only (If Equipped) On hot days the engine oil temperature may become too hot during sustained high-speed driving or if towing a trailer up long grades. If this happens, a HOTOIL message will flash in the odometer and the vehicle speed will be reduced to 48 mph (77 km/h) maximum until the engine oil temperature is reduced.
WHAT TO DO IN EMERGENCIES Jack Location The jack and jack-handle are stowed underneath a cover in the rear storage bin in the cargo area. 393 Spare Tire Location The spare tire is stowed underneath the rear of the vehicle and is held in place by means of a cable winch mechanism. Preparations For Jacking 1. Park the vehicle on a firm level surface as far from the edge of the roadway as possible. Avoid icy or slippery areas. 2. Set the parking brake and place the shift lever in PARK. 3.
394 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. Spare Tire Removal NOTE: On Seven-Passenger Models, fold the third-row passenger seats flat. This will provide more space when accessing the jacking tools and when operating the winch mechanism. 1. Remove the jack-handle components 1, 2, and 3 from storage and assemble them.
WHAT TO DO IN EMERGENCIES seated on component 2. This will make it easier to rotate the assembly when operating the winch mechanism. 395 4. Tilt the retainer at the end of the winch cable and remove it from the center of the wheel. 2. Fit the assembled jack-handle over the winch drive nut located in the jack storage area. Rotate the jackhandle assembly counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull the spare tire out from underneath the vehicle.
396 WHAT TO DO IN EMERGENCIES Spare Tire Stowage NOTE: On Seven-Passenger Models, fold the third-row passenger seats flat. This will provide more space when accessing the jacking tools and when operating the winch mechanism. 1. Remove the jack-handle components 1, 2, and 3 from storage and assemble them.
WHAT TO DO IN EMERGENCIES NOTE: Assemble components 2 and 3 by seating the small ball at the end of component 2 in the small hole at the end of component 3. This will lock these components together. Assemble components 1 and 2 so that the wheel nut socket at the end of component 1 faces upward when seated on component 2. This will make it easier to rotate the assembly when operating the winch mechanism. 2. Fit the assembled jack-handle over the winch drive nut located in the jack storage area.
398 WHAT TO DO IN EMERGENCIES 4. Tilt the retainer at the end of the winch cable and drop it through the center of the wheel. Then place the spare tire with the cable and retainer underneath the vehicle. 5. Fit the assembled jack-handle over the winch drive nut. Rotate the jack-handle assembly clockwise to raise the spare tire into the storage area. Continue to rotate the jack-handle assembly until you hear the winch mechanism click three times. It cannot be over tightened.
WHAT TO DO IN EMERGENCIES WARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly and set an automatic transaxle in PARK; a manual transaxle in REVERSE. • Never start or run the engine with the vehicle on a jack.
400 WHAT TO DO IN EMERGENCIES Jack Engagement Locations
WHAT TO DO IN EMERGENCIES 4. Raise the vehicle by turning the jack screw clockwise with the jack handle. Raise the vehicle until the tire just clears the road surface and enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum stability. 401 WARNING! To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. WARNING! Raising the vehicle higher than necessary can make the vehicle less stable.
402 WHAT TO DO IN EMERGENCIES • Refer to “Compact Spare Tire” and to “Limited-Use Spare” under “Tires — General Information” in Section 5 for additional warnings, cautions, and information about the spare tire, its use, and operation. 7. Install the wheel nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the wheel nuts. WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered.
WHAT TO DO IN EMERGENCIES 11. Place the deflated (flat) tire in the cargo area. Do not stow the deflated tire in the spare tire stowage location. Have the deflated (flat) tire repaired or replaced as soon as possible. 12. To stow the winch cable and retainer, fit the assembled jack-handle over the winch drive nut. Rotate the jack-handle assembly clockwise until you hear the winch mechanism click three times. It cannot be over tightened. 13. Stow the jack-handle and jack. 14.
404 WHAT TO DO IN EMERGENCIES JUMP-STARTING PROCEDURES WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be hurt by the fan. • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transaxle cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
WHAT TO DO IN EMERGENCIES The battery is stored in a compartment that is located behind the left front fender and is accessible through the wheel well. Remote jump-start terminals are located in the engine compartment. 1. Wear eye protection and remove any metal jewelry such as watchbands or bracelets that might make an inadvertent electrical contact. 2. When boosting from a battery in another vehicle, park that vehicle within booster cable reach, but without allowing the vehicles to touch.
406 WHAT TO DO IN EMERGENCIES 5. Connect the other cable, first to the negative terminal of the booster battery and then to the engine ground (-) of the vehicle with the discharged battery. Make sure you have a good contact on the engine ground. Refer to the following illustration for jump-starting connections. 6. If the vehicle is equipped with Sentry Key Immobilizer, turn the ignition switch to the ON position for three seconds before moving the ignition switch to the START position. 7.
WHAT TO DO IN EMERGENCIES WARNING! During cold weather when temperatures are below freezing point, electrolyte in a discharged battery may freeze. Do not attempt jump-starting because the battery could rupture or explode. The battery temperature must be brought up above freezing point before attempting jump-start. NOTE: Refer to “Maintenance Procedures” in Section 7 for information on accessing the battery for service or replacement. 407 WARNING! Any procedure other than above could result in: 1.
408 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between REVERSE and 1st gear. Usually the least accelerator pedal pressure to maintain the rocking motion without spinning the wheels is most effective.
WHAT TO DO IN EMERGENCIES CAUTION! 409 TOWING A DISABLED VEHICLE Without The Ignition Key Racing the engine or spinning the wheels too fast may lead to transaxle overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h). Do not spin the wheels continuously for more than 30 seconds. Front Wheel Drive (FWD) Special care must be taken when the vehicle is towed with the ignition in the LOCK position. Flat bed towing is the preferred towing method.
410 WHAT TO DO IN EMERGENCIES Towing This Vehicle Behind Another Vehicle (Flat Towing With The Key In The Ignition And All Four Wheels On The Ground) CAUTION! • If the vehicle being towed requires steering, the ignition switch must be in the ON position, not in the LOCK or ACC position. • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result.
WHAT TO DO IN EMERGENCIES All Wheel Drive (AWD) Your vehicle may be towed under the following conditions: The shift lever must be in NEUTRAL, the distance to be traveled must not exceed 15 mi (25 km), the towing speed must not exceed 25 mph (40 km/h), and both front and rear wheels must be on the ground. Exceeding these towing limits may cause a transaxle failure.
MAINTAINING YOUR VEHICLE CONTENTS m 2.4L Engine Compartment . . . . . . . . . . . . . . . . 416 m Maintenance Procedures . . . . . . . . . . . . . . . . . . 422 m 2.7L Engine Compartment . . . . . . . . . . . . . . . . 417 ▫ Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 422 m 3.5L Engine Compartment . . . . . . . . . . . . . . . . 418 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . . 426 m Onboard Diagnostic System — OBD II . . . . . . . .
414 MAINTAINING YOUR VEHICLE ▫ A/C Air Filter — If Equipped . . . . . . . . . . . . 432 ▫ Front And Rear Wheel Bearings . . . . . . . . . . . 449 ▫ Power Steering — Fluid Check . . . . . . . . . . . . 434 ▫ Appearance Care And Protection From Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . 449 ▫ Front Suspension Ball Joints . . . . . . . . . . . . . . 435 ▫ Steering Linkage . . . . . . . . . . . . . . . . . . . . . . 435 ▫ Body Lubrication . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 415 ▫ License Plate Light . . . . . . . . . . . . . . . . . . . . 467 ▫ Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470 m Fluids And Capacities . . . . . . . . . . . . . . . . . . . 468 ▫ Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472 m Fluids, Lubricants, And Genuine Parts . . . . . . . .
416 MAINTAINING YOUR VEHICLE 2.
MAINTAINING YOUR VEHICLE 417 2.
418 MAINTAINING YOUR VEHICLE 3.
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transaxle control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
420 MAINTAINING YOUR VEHICLE off the message. If the problem persists, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the MIL. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of this vehicle’s emissions control system. Failure to pass could prevent vehicle registration.
MAINTAINING YOUR VEHICLE 5. Approximately 15 seconds later, one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition key or start the engine. This means that the vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and will remain fully illuminated until you turn OFF the ignition key or start the engine.
422 MAINTAINING YOUR VEHICLE AUTHORIZED DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service manuals are available which include detailed service information for your vehicle. Refer to these service manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you.
MAINTAINING YOUR VEHICLE 423 The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off. Do not check oil level before starting the engine after it has sat overnight. Checking engine oil level when the engine is cold will give you an incorrect reading. Checking the oil while the vehicle is on level ground and only when the engine is hot, will improve the accuracy of the oil level readings. Maintain the oil level between the range markings on the dipstick.
424 MAINTAINING YOUR VEHICLE CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to the Maintenance Schedule in Section 8 for information on this system.
MAINTAINING YOUR VEHICLE Engine Oil Viscosity (SAE Grade) — 2.4L and 2.7L Engines SAE 5W-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to the “Engine Compartment” illustration in this section.
426 MAINTAINING YOUR VEHICLE Disposing of Used Engine Oil and Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can present a problem to the environment. Contact your authorized dealer, service station, or governmental agency for advice on how and where used oil and oil filters can be safely discarded in your area.
MAINTAINING YOUR VEHICLE Spark Plugs Spark plugs must fire properly to assure engine performance and emissions control. New plugs should be installed at the specified mileage. The entire set should be replaced if there is any malfunction due to a faulty spark plug. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the proper type of spark plug for use in your vehicle. Engine Air Cleaner Filter Refer to the Maintenance Schedule in Section 8 for engine air cleaner filter service intervals.
428 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic converter will not require maintenance. However, it is important to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. CAUTION! A hot exhaust system can start a fire if you park over materials that can burn.
MAINTAINING YOUR VEHICLE 429 and allow the vehicle to cool. Thereafter, obtain service, including a tune-up to manufacturer’s specifications immediately. Maintenance-Free Battery You will never have to add water, nor is periodic maintenance required. To minimize the possibility of catalyst damage: NOTE: The battery is stored in a compartment that is located behind the left front fender and is accessible through the wheel well.
430 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post.
MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. 431 WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system.
432 MAINTAINING YOUR VEHICLE Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment.
MAINTAINING YOUR VEHICLE Glove Box Removal 3. Pivot the glove box downward. 4. Disengage the two retaining tabs that secure the filter cover to the HVAC housing and remove the cover. 433 A/C Air Filter Replacement 5. Remove the A/C air filter by pulling it straight out of the housing. 6. Install the A/C air filter with the arrow on the filter pointing toward the floor. When installing the filter cover, make sure the retaining tabs fully engage the cover.
434 MAINTAINING YOUR VEHICLE CAUTION! The A/C air filter is labeled with an arrow to indicate airflow direction through the filter. Failure to install the filter properly will result in the need to replace it more often. 7. Reinstall the glove box door. Make sure that the hinges are seated fully as you raise the door. Otherwise, the door latch will not align properly. Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not required.
MAINTAINING YOUR VEHICLE Front Suspension Ball Joints There are two front suspension lower ball joints that are permanently lubricated. Inspect these ball joints when other maintenance is performed. A damaged seal and the corresponding potentially damaged ball joint must be replaced. Steering Linkage The tie rod end ball joints should be inspected for external leakage and damage when other maintenance is performed.
436 MAINTAINING YOUR VEHICLE Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield or rear window. Avoid using the wiper blades to remove frost or ice from the windshield or rear window. Make sure that they are not frozen to the glass before turning them on to avoid damaging the blade.
MAINTAINING YOUR VEHICLE WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
438 MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the LOCK position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • You or others can be badly burned by hot coolant or steam from your radiator. If you see or hear steam coming from under the hood, don’t open the hood until the radiator has had time to cool.
MAINTAINING YOUR VEHICLE Cooling System — Drain, Flush, and Refill The system should be drained, flushed, and refilled at the intervals shown in the Maintenance Schedule in Section 8. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of old antifreeze solution. Selection of Coolant Use only the manufacturer’s recommended coolant.
440 MAINTAINING YOUR VEHICLE Adding Coolant Your vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to five years or 100,000 mi (160 000 km) before replacement. To prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. Please review these recommendations for using Hybrid Organic Additive Technology (HOAT) coolant.
MAINTAINING YOUR VEHICLE The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.
442 MAINTAINING YOUR VEHICLE Six Cylinder Engines — the level of the coolant in the pressurized coolant bottle should be between the “COLD” and “FULL” range on the bottle when the engine is cold. The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for coolant freeze point or replacing coolant. Advise your service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month.
MAINTAINING YOUR VEHICLE • Maintain coolant concentration at 50% HOAT engine coolant (minimum) and distilled water for proper corrosion protection of your engine, which contains aluminum components. • Make sure that the radiator and coolant recovery bottle overflow hoses are not kinked or obstructed. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also. • Do not change the thermostat for Summer or Winter operation.
444 MAINTAINING YOUR VEHICLE Fuel System The Electronic Fuel Injection high-pressure fuel system’s hoses and fittings have unique material characteristics that provide adequate sealing and resist attack by deteriorated gasoline. You are urged to use only the manufacturer’s specified hoses and fittings, or their equivalent in material and specification, in any fuel system servicing. It is mandatory to replace any damaged hoses or fittings that have been removed during service.
MAINTAINING YOUR VEHICLE Ensure nylon tubing in these areas has not melted or collapsed. Inspect all hose clamps and couplings to make sure they are secure and no leaks are present. NOTE: • Often, fluids such as oil, power steering fluid, and brake fluid are used during assembly plant operations to ease the assembly of hoses to couplings. Therefore, oil wetness at the hose-coupling area is not necessarily an indication of leakage.
446 MAINTAINING YOUR VEHICLE Clean the top of the master cylinder area before removing the cap. If necessary, add fluid to bring the fluid level up to the requirements described on the brake fluid reservoir. Overfilling of fluid is not recommended because it may cause leaking in the system. Fluid level can be expected to fall as the brake pads wear. Brake fluid level should be checked when pads are replaced. However, low fluid level may be caused by a leak and a checkup may be needed.
MAINTAINING YOUR VEHICLE CAUTION! Do not allow petroleum-based fluid to contaminate the brake fluid. Seal damage may result. 447 Fluid Level Check — Vehicles with 2.4L and 2.7L Engines Use the following procedure to check the automatic transaxle fluid level properly: 1. Park the vehicle on level ground. Automatic Transaxle The automatic transaxle and differential assembly are contained within a single housing. 2. Run the engine at curb idle speed for a minimum of 60 seconds.
448 MAINTAINING YOUR VEHICLE driven at least 15 mi (24 km). Hot fluid cannot be held comfortably between the fingertips. Cold fluid is at a temperature below 80°F (27°C). 7. Wipe the dipstick clean and reinsert until seated. Then, remove dipstick and note the reading. a. If the fluid is hot, the reading should be in the crosshatched area marked “HOT” (between the upper two holes in the dipstick). b. If the fluid is cold, the fluid level should be between the lower two holes in the area marked “COLD.
MAINTAINING YOUR VEHICLE Fluid and Filter Changes Change the automatic transaxle fluid and filter at the intervals shown in the “Maintenance Schedule” in this manual. In addition, change the fluid and filter if the transaxle is disassembled for any reason. Selection of Lubricant It is important that the proper lubricant is used in the transaxle to assure optimum transaxle performance. Use only manufacturer’s recommended transmission fluid.
450 MAINTAINING YOUR VEHICLE corrosive to the metal in your vehicle. Outside parking, which exposes your vehicle to airborne contaminants, road surfaces on which the vehicle is operated, extreme hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and underbody protection. The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle.
MAINTAINING YOUR VEHICLE CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder that will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. • It is important that the drain holes in the lower edges of the doors, rocker panels, and cargo area be kept clear and open.
452 MAINTAINING YOUR VEHICLE heavy soil and/or excessive brake dust, use Mopart Wheel Cleaner (05066247AB) or equivalent or select a nonabrasive, non-acidic cleaner. Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Only Mopart or equivalent is recommended. Do not use oven cleaner. Avoid automatic car washes that use acidic solutions or harsh brushes that may damage the wheels’ protective finish.
MAINTAINING YOUR VEHICLE WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. YES Essentialst Fabric Cleaning Procedure – If Equipped YES Essentialst seats may be cleaned in the following manner: • Remove as much of the stain as possible by blotting with a clean, dry towel. • Blot any remaining stain with a clean, damp towel.
454 MAINTAINING YOUR VEHICLE Glass Surfaces All glass surfaces should be cleaned on a regular basis with Mopart Glass Cleaner or any commercial household-type glass cleaner. Never use an abrasive type cleaner. Use caution when cleaning the inside rear window equipped with an electric defroster. Do not use scrapers or other sharp instruments that may scratch the elements. When cleaning the rear view mirror, spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirror.
MAINTAINING YOUR VEHICLE FUSES (TOTALLY INTEGRATED POWER MODULE) The Totally Integrated Power Module (TIPM) is located in the engine compartment near the air cleaner assembly. This center contains fuses and relays. 455 CAUTION! • When installing the power module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the TIPM, and possibly result in an electrical system failure.
456 MAINTAINING YOUR VEHICLE Cavity J1 J2 J3 J4 J5 J6 J7 J8 Cartridge Fuse 40 Amp Green 30 Amp Pink 30 Amp Pink 25 Amp White 25 Amp White 40 Amp Green 30 Amp Pink 40 Amp Green MiniFuse — — — — — — — — Description Cavity Power Folding Seat J9 Transfer Case Module - if equipped Rear Door Module J10 Cartridge Fuse 40 Amp Green 30 Amp Pink J11 30 Amp Pink Passenger Door Node J13 Anti-Lock Brake System (ABS) Pump/Electronic Stability Program (ESP) Anti-Lock Brake System (ABS) Valve/Electronic Sta
MAINTAINING YOUR VEHICLE Cavity J19 J20 J21 J22 M1 M2 M3 M4 M5 Cartridge Fuse 60 Amp Yellow 30 Amp Pink 20 Amp Blue 25 Amp White — — — — — MiniFuse — — — — 15 Amp Blue 20 Amp Yellow 20 Amp Yellow 10 Amp Red 25 Amp Natural Description Cavity Radiator Fan Motor M6 Front Windshield Wiper Hi/ Low Front/Rear Washer M7 Sunroof Module - if equipped Center High Mounted Stop Light (CHMSL) (If Equipped) Trailer Lights M9 Front/Rear Axle (If Equipped) Trailer Tow Power Inverter - if equipped M8 Cartridge
458 MAINTAINING YOUR VEHICLE Cavity M11 M12 M13 M14 Cartridge Fuse — — — — M15 MiniFuse 10 Amp Red 30 Amp Green 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow — M16 — 10 Amp Red Description Automatic Temperature Control (ATC) - if equipped, Underhood Light Radio, Amplifier (AMP) Cabin Compartment Node (CCN), Multifunction Switch/Siren Module (If Equipped) Trailer Tow (BUX) Auto Dim Rearview Mirror if equipped, Infrared Sensor (IR) - if equipped, Multifunction Switch, Tire Pressure Monitor System (TPMS)
MAINTAINING YOUR VEHICLE Cavity M25 M26 M27 M28 M29 M30 M31 M32 Cartridge Fuse — — — — — — — — MiniFuse 20 Amp Yellow 10 Amp Red 10 Amp Red 10 Amp Red 10 Amp Red 15 Amp Blue 20 Amp Yellow 10 Amp Red Description Fuel Pump/Diesel Lift Pump Power MIRRORS Switch/ Drivers Window Switch Steering Column Lock, Wireless Ignition Node (WIN) NGC (Powertrain Control Module)/Transmission Feed (Batt) Occupant Classification Module (OCM) Rear Wiper Module Module/Power Folding Mirror Back-Up Lights Occupant Restraint C
460 K1 K2 K3 K4 K5 K6 K7 K8 K9 K10 K11 MAINTAINING YOUR VEHICLE — — — — — — — — — — — — — — — — — — — — — — Ignition Run/ Accessory Relay Ignition Run Relay Starter Solenoid Relay Ignition Run/Start Relay PCM Relay Electric Back Light (EBL) Relay — — Rear Blower Relay ASD Relay (Feed for M19 and M21) Radiator Fan Relay Low Speed VEHICLE STORAGE If you will not be using your vehicle for more than 21 days you may want to take steps to preserve your battery.
MAINTAINING YOUR VEHICLE LIGHT BULBS — Interior Bulb Number Courtesy/Reading Lights (Incandescent) . . . . . . . . . . . . . . . . . . . . . . . . . . . 578 Courtesy/Reading Lights (Optional LED) . . . . . . . . . . . . . . . . . . . . . . . . . LED (Serviced at Authorized Dealer) Glove Box Light . . . . . . . . . . . . . . . . . . . . . . . . . 194 Cargo Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 579 Optional Door Map Pocket/ Cupholder Lighting . . . . . . . . . . . . . . . . . . . . .
462 MAINTAINING YOUR VEHICLE BULB REPLACEMENT Low Beam Headlight, High Beam Headlight, Front Turn Signal/Park Light, Side Marker Light 1. Open the hood. NOTE: It may be necessary to remove the air cleaner filter housing and position the Totally Integrated Power Module (TIPM) aside to replace certain the lights in the left headlight housing. 2. Rotate the applicable bulb and connector assembly 1⁄4 turn counterclockwise and remove the assembly from the headlight housing.
MAINTAINING YOUR VEHICLE CAUTION! 463 2. Rotate the bulb’s electrical connector 1⁄4 turn counterclockwise and remove it from the fog light housing. Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 4. Install the bulb and connector assembly into the headlight housing and rotate it 1⁄4 turn clockwise to lock it in place.
464 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 4. Install the bulb and connector assembly into the fog light housing and rotate the connector 1⁄4 turn clockwise to lock it in place. 5. Reinstall the front lower wheel well access panel and fasteners.
MAINTAINING YOUR VEHICLE 4. Rotate the applicable bulb’s electrical connector 1⁄4 turn counterclockwise and remove it from the taillight housing. 465 6. Install the bulb and connector assembly into the taillight housing and rotate the connector 1⁄4 turn clockwise to lock it in place. 7. Reinstall the taillight housing and fasteners. Changing the Tail Light or Backup Light 1. Open the liftgate. 2.
466 MAINTAINING YOUR VEHICLE 4. Rotate the applicable bulb’s electrical connector 1⁄4 turn counterclockwise and remove it from the housing. 5. Remove the bulb from the connector socket and install the replacement bulb. 6. Install the bulb and connector assembly into the housing and rotate the connector 1⁄4 turn clockwise to lock it in place. 7. Reinstall the taillight housing and fasteners.
MAINTAINING YOUR VEHICLE License Plate Light 1. Push the small locking tab sticking out of the end of the lens toward the side of the vehicle and hold it in that position. 467 2. Insert a small flat-blade tool between the end of the lens with the locking tab and the surrounding housing and then pivot the tool to separate the lens from the housing. 3.
468 MAINTAINING YOUR VEHICLE FLUIDS AND CAPACITIES Component Fuel (approximate) Front Wheel Drive (FWD) Models with 2.4 Liter PZEV Engine FWD Models without 2.4 Liter PZEV Engine All-Wheel Drive Models Engine Oil with Filter 2.4 Liter Engine (SAE 5W-20, API Certified) 2.7 Liter Engine (SAE 5W-20, API Certified) 3.5 Liter Engine (SAE 10W-30, API Certified) Cooling System * 2.
MAINTAINING YOUR VEHICLE Component 2.7 Liter Engine and Three-Zone Climate Control System (Mopart Antifreeze/Coolant 5 Year/100,000 Mile Formula) or equivalent 3.5 Liter Engine and Single- or Dual-Zone Climate Control System (Mopart Antifreeze/Coolant 5 Year/100,000 Mile Formula) or equivalent 3.5 Liter Engine and Three-Zone Climate Control System (Mopart Antifreeze/Coolant 5 Year/100,000 Mile Formula) or equivalent * Includes heater and coolant recovery bottle filled to MAX level. U.S. 12 qts Metric 11.
470 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil (2.4L) Engine Oil (2.7L) Engine Oil (3.5L) Oil Filter (2.4L) Oil Filter (2.7L) Oil Filter (3.5L) Spark Plugs (2.4L) Fluids, Lubricants, and Genuine Parts Mopart Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent Use API Certified SAE 5W-20 Engine Oil meeting the requirements of Chrysler Material Standard MS-6395.
MAINTAINING YOUR VEHICLE 471 Component Fluids, Lubricants, and Genuine Parts Spark Plugs (2.7L) RE14PMC5 (Gap.050 in [1.27 mm]) Spark Plugs (3.5L) ZFR5LP-13G (Gap.050 in [1.27 mm]) Fuel Selection (2.4L) 87 Octane Fuel Selection (2.7L) 87 Octane Fuel Selection (2.7L - EXCEPT CALIE-85 Ethanol FORNIA EMISSION STATES) Fuel Selection (3.
472 MAINTAINING YOUR VEHICLE Chassis Component Automatic Transaxle Power Transfer Unit (PTU) Rear Drive Assembly (RDA) Brake Master Cylinder Power Steering Reservoir Fluids, Lubricants and Genuine Parts Mopart ATF+4 Automatic Transmission Fluid Mopart Gear Lubricant 75W-90 or equivalent Mopart Gear Lubricant 75W-90 or equivalent. Mopart DOT 3, SAE J1703 or equivalent should be used. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids.
MAINTENANCE SCHEDULES CONTENTS m Emissions Control System Maintenance . . . . . . . 474 m Maintenance Schedule . . . . . . . . . . . . . . . . . . . 474 ▫ Maintenance Service Schedule . . . . . . . . . . . .
M A I N T E N A N C E 474 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type, must be done at the times or mileages specified to ensure the continued proper functioning of the Emissions Control System. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
MAINTENANCE SCHEDULES NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 mi (10,000 km) or six months, whichever comes first.
M A I N T E N A N C E S C H E D U L E S 8 476 MAINTENANCE SCHEDULES At Each Stop for Fuel At Each Oil Change • Check the engine oil level. Refer to “Engine Oil” under “Maintenance Procedures” in Section 7. • Change the engine oil filter. • Check the windshield washer solvent and add if required. Once a Month • Check tire pressure and look for unusual wear or damage. • Inspect the battery, and clean and tighten the terminals as required.
MAINTENANCE SCHEDULES 6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule 18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires. ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires. ❏ If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary.
M 478 MAINTENANCE SCHEDULES A I N 24,000 Miles (40,000 km) or 24 Months T Maintenance Service Schedule E ❏ Change the engine oil and engine oil filter. N ❏ Rotate the tires. A ❏ If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, N and replace if necessary.
MAINTENANCE SCHEDULES 42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule 54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires. ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires. ❏ If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary.
M 480 MAINTENANCE SCHEDULES A I N 60,000 Miles (100,000 km) or 60 Months T Maintenance Service Schedule E ❏ Change the engine oil and engine oil filter. N ❏ Rotate the tires. A ❏ Inspect the brake linings, and replace if necessary. N C ❏ Replace the air conditioning filter (if equipped). E ❏ Replace the engine air cleaner filter. S C H E D U L E S 8 ❏ Replace the spark plugs on 2.4L engines. ❏ Change rear drive assembly (RDA) fluid.
MAINTENANCE SCHEDULES 481 M 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule 78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires. ❏ If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Inspect the brake linings, and replace if necessary. ❏ Inspect the CV joints.
M 482 MAINTENANCE SCHEDULES A I N 90,000 Miles (150,000 km) or 90 Months T Maintenance Service Schedule E ❏ Change the engine oil and engine oil filter. N ❏ Rotate the tires. A ❏ Replace the engine air cleaner filter if not done at 84,000 miles (140,000 km) or 84 months. N C ❏ Replace the spark plugs on 2.4L engines. E ❏ Inspect and replace PCV valve if necessary.
MAINTENANCE SCHEDULES 108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule 114,000 Miles (190,000 km) or 114 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires. ❏ If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Inspect the brake linings, and replace if necessary. ❏ Replace the air conditioning filter (if equipped).
M 484 MAINTENANCE SCHEDULES A I N 120,000 Miles (200,000 km) or 120 Months T Maintenance Service Schedule E ❏ Change the engine oil and engine oil filter. N ❏ Rotate the tires. A ❏ Inspect the brake linings, and replace if necessary. N ❏ Replace the air conditioning filter (if equipped). C ❏ Inspect the CV joints. E ❏ Inspect the exhaust system. S C H E D U L E S 8 ❏ Change rear drive assembly (RDA) fluid. ❏ Change power transfer unit (PTU) fluid. ❏ Change the automatic transmission fluid and filter.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS m Suggestions For Obtaining Service For Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . 487 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . . 489 ▫ Prepare For The Appointment . . . . . . . . . . . . 487 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . . 489 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 487 m Warranty Information (U.S. Vehicles Only) . . . . .
486 IF YOU NEED CONSUMER ASSISTANCE m Publication Order Forms . . . . . . . . . . . . . . . . . . 492 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . 493 m Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . 493 ▫ Temperature Grades . . . . . . . . . . . . . . . . . . . 494 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. Keep a maintenance log of your vehicle’s service history. This can often provide a clue to the current problem.
488 IF YOU NEED CONSUMER ASSISTANCE high quality service. The manufacturer’s authorized dealers have the facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner. • Owner’s telephone number (home and office) This is why you should always talk to an authorized dealer’s service manager first. Most matters can be resolved with this process.
IF YOU NEED CONSUMER ASSISTANCE In Mexico contact: Av. Prolongacion Paseo de la Reforma, 1240 Sante Fe C.P. 05109 Mexico, D. F. In Mexico City: 5081-4568 Outside Mexico City: 1-800-505-1300 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its Customer Center.
490 IF YOU NEED CONSUMER ASSISTANCE Contract, and you require service after the manufacturer’s New Vehicle Limited Warranty expires, please refer to the contract documents, and contact the person listed in those documents. We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience.
IF YOU NEED CONSUMER ASSISTANCE MOPART PARTS Mopart fluids, lubricants, parts, and accessories are available from an authorized dealer. They will help keep the vehicle operating at its best. REPORTING SAFETY DEFECTS In The 50 United States And Washington, D.C. If you believe that your vehicle has a defect that could cause a crash or cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying the manufacturer.
492 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below. Visa, Mastercard, American Express, and Discover orders are accepted. If you prefer mailing your payment, please call for an order form. NOTE: A street address is required when ordering manuals (no P.O. Boxes).
IF YOU NEED CONSUMER ASSISTANCE Call toll free at: • 1–800–890–4038 (U.S.) • 1–800–387–1143 (Canada) Or Visit us on the Worldwide Web at: • www.techauthority.com DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle.
494 IF YOU NEED CONSUMER ASSISTANCE WARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10
496 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . 318,321 ABS (Anti-Lock Brake System) . . . . . . . . . 212,322,323 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 440 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 367 Adding Rear Washer Fluid . . . . . . . . . . . . . . . . . 192 Adding Washer Fluid . . . . . . . . . . . . . . . 155,192,436 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 366 Air Cleaner, Engine (Engine Air Cleaner Filter) . .
INDEX Audio Systems (Radio) . . . . . . . . . . . . . . . . . 232,262 Auto Down Power Windows . . . . . . . . . . . . . . . . 35 Auto Unlock, Doors . . . . . . . . . . . . . . . . . . . . . . . 30 Automatic Dimming Mirror . . . . . . . . . . . . . . . . . 85 Automatic Door Locks . . . . . . . . . . . . . . . . . . . . . 30 Automatic Headlights . . . . . . . . . . . . . . . . . . . . 145 Automatic Oil Change Indicator . . . . . . . . . . 208,222 Automatic Temperature Control (ATC) . . . . . . . . .
498 INDEX Brake Assist Warning Light . . . . . . . . . . . . . . . . . 214 Brake Control System, Electronic . . . . . . . . . . . . . 323 Brake Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472 Brake, Parking . . . . . . . . . . . . . . . . . . . . . . . . . . 318 Brake System . . . . . . . . . . . . . . . . . . . . . . . . 321,444 Anti-Lock (ABS) . . . . . . . . . . . . . . . . . . . . 322,323 Fluid Check . . . . . . . . . . . . . . . . . . . . . . . 445,472 Hoses . . . . . . . . . . . .
INDEX Cargo (Vehicle Loading) . . . . . . . . . . . . . . . . 186,370 Catalytic Converter . . . . . . . . . . . . . . . . . . . . . . 427 CD (Compact Disc) Player . . . . . . . . . . . . . . . 232,262 CD (Compact Disc) Player Maintenance . . . . . . . . 279 Cellular Phone . . . . . . . . . . . . . . . . . . . . . 89,262,263 Certification Label . . . . . . . . . . . . . . . . . . . . . . . 370 Chains, Tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349 Changing A Flat Tire . . . . . . . . . . .
500 INDEX Contract, Service . . . . . . . . . . . . . . . . . . . . . . . . 489 Converter, Catalytic . . . . . . . . . . . . . . . . . . . . . . 427 Coolant Pressure Cap (Radiator Cap) . . . . . . . . . . 440 Cooler, Beverage . . . . . . . . . . . . . . . . . . . . . . . . 178 Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . 438 Adding Coolant (Antifreeze) . . . . . . . . . . . . . . 440 Coolant Capacity . . . . . . . . . . . . . . . . . . . . . . 468 Coolant Level . . . . . . . . . . . .
INDEX Disposal Antifreeze (Engine Coolant) . . . . . . . . . . . . . . . 441 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 426 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Door Locks, Automatic . . . . . . . . . . . . . . . . . . . . 30 Door Opener, Garage . . . . . . . . . . . . . . . . . . . . . 161 Drive Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426 Driving On Slippery Surfaces . . . . . . . . . . . . . . . . . . . .
502 INDEX Block Heater . . . . . . . . . . . . . . . . . . . . . . . . . 306 Break-In Recommendations . . . . . . . . . . . . . . . . 74 Checking Oil Level . . . . . . . . . . . . . . . . . . . . . 422 Compartment . . . . . . . . . . . . . . . . . . . . . . . . . 416 Coolant (Antifreeze) . . . . . . . . . . . . . . . . . 438,470 Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438 Exhaust Gas Caution . . . . . . . . . . . . . . . . 38,75,367 Fails to Start . . . . . . . . . . . . . . . .
INDEX Automatic Transaxle . . . . . . . . . . . . . . . . . . . . 449 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . 426,470 Engine Oil Disposal . . . . . . . . . . . . . . . . . . . . 426 Flashers Hazard Warning . . . . . . . . . . . . . . . . . . . . . . . 390 Turn Signal . . . . . . . . . . . . . . . . . . . . . . 77,147,205 Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Flexible Fuel Vehicles . . . . . . . . . . . . . . . . . . . . . 359 Cruising Range . . . . . . .
504 INDEX Ethanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364 Filler Cap (Gas Cap) . . . . . . . . . . . . . . . . . . . . 367 Gasoline . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363 Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444 Materials Added . . . . . . . . . . . . . . . . . . . . . . . 366 Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364 Octane Rating . . . .
INDEX Hands-Free Phone (UConnect™) . . . . . . . . 89,262,263 Hard Drive (HDD) . . . . . . . . . . . . . . . . . . . . 232,262 Hazard Driving Through Flowing, Rising, or Shallow Standing Water . . . . . . . . . . . . . . . . . . . . . . . . 316 Hazard Warning Flasher . . . . . . . . . . . . . . . . . . . 390 Head Restraints . . . . . . . . . . . . . . . . . . . . . . . . . 127 Head Rests . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Headlights . . . . . . . . . . . . . . . . . . . . . . . . .
506 INDEX Immobilizer (Sentry Key) . . . . . . . . . . . . . . . . . . . 15 Indicator, Traction Control . . . . . . . . . . . . . . . . . 213 Infant Restraint . . . . . . . . . . . . . . . . . . . . . . . . 64,65 Inflation Pressure Tires . . . . . . . . . . . . . . . . . . . . 210 Information Center, Vehicle . . . . . . . . . . . . . . . . . 218 Inside Rearview Mirror . . . . . . . . . . . . . . . . . . . . 84 Instrument Cluster . . . . . . . . . . . . . . . . . . . .
INDEX Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 Lead Free Gasoline . . . . . . . . . . . . . . . . . . . . . . 363 Leaks, Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347 Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Liftgate Window Wiper/Washer . . . . . . . . . . . . .
508 INDEX Instrument Cluster . . . . . . . . . . . . . . . . . . 144,203 Intensity Control . . . . . . . . . . . . . . . . . . . . . . . 150 Interior . . . . . . . . . . . . . . . . . . . . . . . . . . 149,150 License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 467 Lights On Reminder . . . . . . . . . . . . . . . . . . . . 146 Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 203,205 Low Tire . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Luggage Rack (Roof Rack) . . . . . . . . . . . . . . . . . 194 Lumbar Support . . . . . . . . . . . . . . . . . . . . . . . . 123 Maintenance Free Battery . . . . . . . . . . . . . . . . . . 429 Maintenance, General . . . . . . . . . . . . . . . . . . . . . 422 Maintenance Procedures . . . . . . . . . . . . . . . . . . . 422 Maintenance Schedule . . . . . . . . . . . . . . . . . . . . 474 Maintenance, Sunroof . . . . . . . . . . . . . . . . . . . . . 171 Malfunction Indicator Light (Check Engine) . .
510 INDEX Octane Rating, Gasoline (Fuel) . . . . . . . . . . . . 363,470 Odometer Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210,216 Oil Change Indicator . . . . . . . . . . . . . . . . . . 208,222 Oil Change Indicator, Reset . . . . . . . . . . . . . . 208,222 Oil, Engine . . . . . . . . . . . . . . . . . . . . . . . . . 422,470 Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 468 Change Interval . . . . . . . . . . . . . . . . . . 208,222,424 Checking . . . . . . . .
INDEX Phone, Hands-Free (UConnect™) . . . . . . . . 89,262,263 Placard, Tire and Loading Information . . . . . . . . . 336 Port Universal Serial Bus (USB) . . . . . . . . . . . . . 232,262 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232,262 Power Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321 Distribution Center (Fuses) . . . . . . . . . . . . . . . 455 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Inverter . . . . . . . . . . . . . . . . . .
512 INDEX Rear Seat, Folding . . . . . . . . . . . . . . . . . . . . 130,140 Rear Washer Fluid . . . . . . . . . . . . . . . . . . . . . . . 192 Rear Wheel Bearings . . . . . . . . . . . . . . . . . . . . . 449 Rear Window Defroster . . . . . . . . . . . . . . . . . . . 193 Rear Window Features . . . . . . . . . . . . . . . . . . . . 191 Rear Wiper/Washer . . . . . . . . . . . . . . . . . . . . . . 191 Rearview Mirrors . . . . . . . . . . . . . . . . . . . . . . . . 84 Reception, Radio . . . . . . . . . .
INDEX Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 491 Safety, Exhaust Gas . . . . . . . . . . . . . . . . . . . . . 38,75 Safety Information, Tire . . . . . . . . . . . . . . . . . . . 332 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Satellite Radio . . . . . . . . . . . . . . . . . . 232,262,263,267 Satellite Radio Antenna . . . . . . . . . . . . . . . . . . . 268 Schedule, Maintenance . . . . . . . . . . . . . . . . . . . . 474 Seat Belt Maintenance . . . . .
514 INDEX Selection of Coolant (Antifreeze) . . . . . . . . . . 439,470 Selection of Oil . . . . . . . . . . . . . . . . . . . . . . . . . 424 Sentry Key (Immobilizer) . . . . . . . . . . . . . . . . . . . 15 Sentry Key Programming . . . . . . . . . . . . . . . . . . . 17 Sentry Key Replacement . . . . . . . . . . . . . . . . . . . 16 Service Assistance . . . . . . . . . . . . . . . . . . . . . . . 487 Service Contract . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Starting and Operating . . . . . . . . . . . . . . . . . . . . 303 Starting Procedures . . . . . . . . . . . . . . . . . . . . . . 303 Steering Column Lock . . . . . . . . . . . . . . . . . . . . . . . . . 156 Linkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . 331,434 Tilt Column . . . . . . . . . . . . . . . . . . . . . . . . . . 156 Wheel, Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . .
516 INDEX Tire Markings . . . . . . . . . . . . . . . . . . . . . . . . . . 332 Tire Safety Information . . . . . . . . . . . . . . . . . . . . 332 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77,340,493 Aging (Life of Tires) . . . . . . . . . . . . . . . . . . . . 347 Air Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . 340 Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . 349 Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349 Changing . . .
INDEX Traction Control . . . . . . . . . . . . . . . . . . . . . . 213,326 Trailer Sway Control (TSC) . . . . . . . . . . . . . . . . . 330 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . 372 Cooling System Tips . . . . . . . . . . . . . . . . . . . . 387 Hitches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376 Minimum Requirements . . . . . . . . . . . . . . . . . 380 Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385 Trailer and Tongue Weight . . . .
518 INDEX Universal Serial Bus (USB) Port . . . . . . . . . . . 232,262 Universal Transmitter . . . . . . . . . . . . . . . . . . . . . 161 Unleaded Gasoline . . . . . . . . . . . . . . . . . . . . . . . 363 Untwisting Procedure, Seat Belt . . . . . . . . . . . . . . 45 Upholstery Care . . . . . . . . . . . . . . . . . . . . . . . . 452 USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . 232,262 Vacuum/Vapor Harnesses . . . . . . . . . . . . . . . . . 443 Vanity Mirrors . . . . . . . . . . . .
INDEX Window Fogging . . . . . . . . . . . . . . . . . . . . . . . . 296 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Windshield Defroster . . . . . . . . . . . . . . . . 77,282,283 Windshield Washers . . . . . . . . . . . . . . . . . . . 151,154 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436 Windshield Wiper Blades . . . . . . . . . . . . . . . . . . 435 Windshield Wipers . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
Ì81-2Ç:È-Ç)*FÎ 62697 09 Journey_OM.indd 1 $ISZTMFS --$ Second Edition Printed in U.S.A.