2010 OWNER’ S MANUAL Sebring Convertible
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 1 CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number .............. 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . . 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions. VEHICLE IDENTIFICATION NUMBER The vehicle identification number (VIN) is on the left front corner of the instrument panel.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . 18 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . 12 ▫ To Disarm The System . . . . . . . . . . . . . . . . . 19 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . 14 䡵 Illuminated Entry — If Equipped . . . . . . . . . . . 20 䡵 Sentry Key威 . . . . . . . . . . . . . . . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Remote Open Window Feature — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . 25 ▫ Programming Additional Transmitters . . . . . . 26 ▫ Battery Replacement . . . . . . . . . . . . . . . . . . . 26 ▫ General Information . . . . . . . . . . . . . . . . . . . 27 䡵 Remote Starting System — If Equipped . . . . . . . 27 ▫ How To Use Remote Start . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ BeltAlert威 Programming . . . . . . . . . . . . . . . . 50 䡵 Engine Break-In Recommendations . . . . . . . . . . 77 ▫ Seat Belts And Pregnant Women . . . . . . . . . . 51 䡵 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 ▫ Seat Belt Extender . . . . . . . . . . . . . . . . . . . . . 51 ▫ Transporting Passengers . . . . . . . . . . . . . . . . 78 ▫ Supplemental Restraint System (SRS) Airbags . . . . . . . . . . . . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your authorized dealer. Ask your authorized dealer for these numbers and keep them in a safe place. You can insert the double-sided keys into the locks with either side up. Vehicle Key Ignition Key Removal Place the shift lever in PARK.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: • If you try to remove the key before you place the shift lever into PARK, the key may become trapped temporarily in the ignition switch lock cylinder. If this occurs, rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition switch lock cylinder to warn you that this safety feature is inoperable.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), the power window switches, radio, hands–free system (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either door will cancel this feature. The time for this feature is programmable.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 The system uses ignition keys, which have an embedded electronic chip (transponder), to prevent unauthorized vehicle operation. Therefore, only keys that are programmed to the vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if someone uses an invalid key to start the engine.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Replacement Keys Customer Key Programming You can program new keys to the system if you have two NOTE: Only keys that have been programmed to the valid Sentry Keys威 by performing the following procevehicle electronics can be used to start the vehicle. Once dure: a Sentry Key威 has been programmed to a vehicle, it cannot be programmed to any other vehicle. 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Insert a blank Sentry Key威 into the ignition switch. Turn the ignition switch to the ON position within 60 seconds. After 10 seconds, a single chime will sound. In addition, the Vehicle Security Light will stop flashing. To indicate that programming is complete, the Vehicle Security Light will turn on again for three seconds and then turn off. 17 dealer to have all remaining keys erased from the systems memory.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE VEHICLE SECURITY ALARM — IF EQUIPPED To Arm The System The Vehicle Security Alarm monitors the doors and trunk 1. Remove the keys from the ignition switch and get out for unauthorized entry and ignition switch for unauthoof the vehicle. rized operation. 2. Lock the door using either the power door lock switch If something triggers the alarm, the Vehicle Security (one door must be open) or the LOCK button on the Alarm will signal for about 18 minutes.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 NOTE: NOTE: • During the 16 second arming period, if a door is • The driver’s door key cylinder and the trunk button on opened or the ignition switch is turned ON, the the RKE transmitter cannot arm or disarm the Vehicle Vehicle Security Alarm will automatically disarm. Security Alarm. • Once armed, the Vehicle Security Alarm disables the • The Vehicle Security Alarm remains armed during unlock switch on the driver door trim panel and trunk entry.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the Vehicle Security Alarm is armed and the battery becomes disconnected the Vehicle Security Alarm will remain armed when the battery is reconnected. The exterior lights will flash, and the horn will sound. If this occurs, disarm the Vehicle Security Alarm. This feature also turns on the approach lighting (if equipped).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 REMOTE KEYLESS ENTRY (RKE) This system allows you to lock or unlock the doors, open the trunk, open the convertible top (if equipped), lower both door and rear quarter windows (if equipped), or activate the Panic Alarm from distances up to 66 ft (20 m) using a hand-held Remote Keyless Entry (RKE) transmitter. The RKE transmitter does not need to be pointed at the vehicle to activate the system.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Key Unlock, Driver Door/All Doors First Press This feature lets you program the system to unlock either the driver’s door or both doors on the first press of the UNLOCK button on the RKE transmitter. To change the current setting, proceed as follows: 2. Release both buttons at the same time.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Flash Lights with Lock The feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmitter. This feature can be turned on or turned off.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE (EVIC)/Personal Settings (Customer-Programmable Fea- • For vehicles not equipped with the EVIC, perform the tures)” in “Understanding Your Instrument Panel” for following steps: further information. 1. Press the LOCK button on a programmed RKE transmitter for at least four seconds, but not longer than To Lock the Doors Press and release the LOCK button on the RKE transmit- 10 seconds. Then, press the PANIC button while still ter to lock both doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Convertible Top Operation Button — If Equipped Refer to “Convertible Top Operation” under “Understanding The Features Of Your Vehicle” for further information. 25 Using the Panic Alarm To turn the Panic Alarm feature on or off, press and hold the PANIC button on the RKE transmitter for at least one second and release.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Programming Additional Transmitters Refer to Sentry Key威 “Customer Key Programming.” If you do not have a programmed RKE transmitter, contact your authorized dealer for details. Battery Replacement The recommended replacement battery is CR2032. NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. Battery Service • Do not touch the battery terminals that are on the back housing or the printed circuit board.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 2. Closeness to a radio transmitter such as a radio station General Information This device complies with part 15 of FCC rules and with tower, airport transmitter, military base, and some mobile RS-210 of Industry Canada. Operation is subject to the or CB radios. following conditions: REMOTE STARTING SYSTEM — IF EQUIPPED 1. This device may not cause harmful interference. This system uses the Remote Keyless Entry (RKE) transmitter to start the engine conve2.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Hood closed WARNING! (Continued) • Trunk closed • Hazard switch off • Brake switch inactive (brake pedal not pressed) • Ignition key removed from ignition switch • Battery at an acceptable charge level, and • RKE PANIC button not pressed WARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monoxide (CO) which is odorless and colorless.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 the ignition switch must be cycled to the ON position DOOR LOCKS before you can repeat the start sequence for a third cycle. Manual Door Locks To Exit Remote Start Mode without Driving the To lock each door, push the door lock plunger on each Vehicle door trim panel downward. To unlock each door, pull the Press and release the REMOTE START button one time or door lock plunger on each door trim panel upward.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the door lock plunger is down when you shut the door, Power Door Locks the door will lock. Make sure the keys are not inside the A door lock switch is located on the driver and passenger door trim panel. Press this switch to lock or unlock the vehicle before closing the door. doors. WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Door Locks When enabled, your door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). The Automatic Door Locks feature can be enabled or disabled by your authorized dealer. See your authorized dealer for programming. 31 6. The vehicle speed is 0 mph (0 km/h).
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Press the power door UNLOCK switch to unlock the doors. 4. A single chime will indicate the completion of the programming. NOTE: This feature will not be functional until the vehicle has been driven and the shift lever returned to the PARK position. 5. Repeat these steps if you want to return this feature to its previous setting. NOTE: Use the Automatic Unlock Doors on Exit feature in accordance with local laws.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • If a fluttering noise is heard from the rear seat belts while driving with the windows down, safely bring the vehicle to a stop and buckle the rear seat belts over the empty seats. This will keep tension on the seat belts and remove the fluttering condition. WARNING! Never leave children in a vehicle, with the keys in the ignition switch.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), the power window switches will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either door will cancel this feature. To reactivate the window Smart Glass Feature, perform the following steps after vehicle power is restored. 1. Lowering all four windows to the full open position. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 button (setting it in the down position). To enable the Wind Buffeting window control, press and release the window LOCK Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the button again (setting it in the up position). ears. Your vehicle may exhibit wind buffeting with one window down in certain open or partially open positions. This is a normal occurrence and can be minimized.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The trunk release button on the dash will be disabled if the vehicle is locked by pressing the power door lock switch or by pressing the LOCK button on the Remote Keyless Entry (RKE) transmitter. The trunk release button will be enabled when the veTrunk Release hicle is unlocked by the RKE or if the Button key is inserted into the ignition and turned to ON or START. NOTE: This provides a locked area in the vehicle even if the convertible top is open.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 TRUNK SAFETY WARNING WARNING! 2 Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended. Once in the trunk, young children may not be able to escape, even if they entered through the rear seat. If trapped in the trunk, children can die from suffocation or heat stroke.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Advanced Front Airbags for driver and front passenger all the way out and then adjusting the belt to the desired length to restrain a child seat or secure a large item in a seat — if equipped • Supplemental Active Head Restraints (AHR) located on top of the front seats (integrated into the head If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and Tether restraint) for CHildren (LATCH) feature also
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly. 39 of the worst injuries happen when people are thrown from the vehicle.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Be sure everyone in your vehicle is in a seat and using a seat belt properly. • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 2. The seat belt latch plate is on the outboard side of the 3. When the belt is long enough to fit, insert the latch front seat, next to your arm. Grasp the latch plate and plate into the buckle until you hear a “click.” pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly. In a sudden stop, you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, lift up on the shoulder belt and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. 43 WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. 1. Position the latch plate as close as possible to the The belt will automatically retract to its stowed position. anchor point. If necessary, slide the latch plate down the webbing to 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, allow the belt to retract fully. grasp and twist the belt webbing 180° to create a fold that begins immediately above the latch plate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When To Use The Automatic Locking Mode Use the Automatic Locking Mode anytime a child safety seat is installed in a seating position that has a belt with this feature. Children 12 years old and under should always be properly restrained in the rear seat. How To Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Active Head Restraints (AHR) These head restraints are passive, deployable components, and vehicles with this equipment can not be readily identified by any markings, only through visual inspection of the head restraint. The head restraint will be split in two halves, with the front half being soft foam and trim, the back half being decorative plastic.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 CAUTION! All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision. NOTE: For more information on properly adjusting and positioning the head restraint, refer to “Adjusting Active Head Restraints” in “Understanding The Features Of Your Vehicle”.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Grasp the deployed AHR from the rear seat. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. Hand Positioning Points On AHR 2. Position the hands on the top of the deployed AHR at a comfortable position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 2 3 — Final Downward Movement To Engage Locking Mechanism AHR In Reset Position NOTE: 4. The AHR front soft foam and trim half should lock • If you have difficulties or problems resetting the Active Head Restraints, see an authorized dealer. into the back decorative plastic half. • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System (BeltAlert姞) If the driver’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the BeltAlert威 will alert the driver to buckle the seat belt. The driver should also instruct all other occupants to buckle their seat belts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 NOTE: Watch for the Seat Belt Reminder Light to turn Keep the belt low so that it does not come across the on while unbuckling and turn off while re-buckling the abdomen. That way the strong bones of the hips will take seat belt. It may be necessary to retract the seat belt the force if there is a collision. partially after unbuckling it. Seat Belt Extender 4. Turn the ignition switch to the LOCK position.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Restraint System (SRS) - Airbags This vehicle has Advanced Front Airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s Advanced Front Airbag is mounted in the center of the steering wheel. The passenger’s Advanced Front Airbag is mounted in the instrument panel, above the glove compartment. The words SRS AIRBAG are embossed on the airbag covers.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 The Advanced Front Airbags have a multistage inflator • After any collision, the vehicle should be taken to an design. This allows the airbag to have different rates of authorized dealer immediately. inflation that are based on the severity and type of Airbag System Components collision.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, and Seat Track Position Sensors • Supplemental Active Head Restraint for Driver and Front Passenger Advanced Front Airbag Features The Advanced Front Airbag system has multistage driver and front passenger airbags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 WARNING! (Continued) • Do not mount any accessories to the knee bolster such as alarm lights, stereos, citizen band radios, etc. 2 Supplemental Seat-Mounted Side Airbags (SAB) Supplemental Seat-Mounted Side Airbags provide enhanced protection to help protect an occupant during a side impact. The Supplemental Seat-Mounted Side Airbag is marked with an airbag label sewn into the outboard side of the front seats.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Do not use accessory seat covers or place objects between you and the side airbags; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury. 1. Children 12 years old and under should always ride buckled up in a rear seat. WARNING! Infants in rear facing child restraints should NEVER ride in the front seat of a vehicle with a passenger Advanced Front Airbag.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 If a child from 1 to 12 years old (not in a rear facing child seat) must ride in the front passenger seat, move the seat as far back as possible and use the proper child restraint. (Refer to “Child Restraints”) 5. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under ⴖIf You Need Assistanceⴖ.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Being too close to the steering wheel or instrument panel during Advanced Front Airbag deployment could cause serious injury, including death. Airbags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • Side airbags also need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 The side airbags will not deploy in all side collisions. Side The ORC contains a backup power supply system that airbag deployment will depend on the severity and type may deploy the airbags even if the battery loses power or it becomes disconnected prior to deployment. of collision. Also, the ORC turns on the Airbag Warning Light in the instrument panel for approximately six to eight seconds for a self-check when the ignition is first turned on.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the Airbag Warning Light in your instrument panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the airbag system immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Based on the severity and type of collision, the side airbag inflator on the crash side of the vehicle may be triggered, releasing a quantity of non-toxic gas. The inflating side airbag exits through the seat seam into the space between the occupant and the door. The side airbags fully inflate in about 10 milliseconds.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Front and/or side airbags will not deploy in all collisions. This does not mean something is wrong with the airbag system. If you do have a collision, which deploys the airbags, any or all of the following may occur: airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System 63 WARNING! (Continued) WARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. You could be injured if the airbag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right side of the instrument panel.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag Warning Light You will want to have the airbags ready to inflate for your protection in a collision. While the airbag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the system immediately. Controller (ORC) may also be disabled. The airbags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: 1. A near-deployment event occurs when the airbag sensor detects severe vehicle deceleration usually indicative of a crash, but not severe enough to warrant airbag deployment. 2. Under certain circumstances, EDR data may not be recorded (e.g., loss of battery power).
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Used for research purposes, such as to match data • Pedal position with a particular crash record in an aggregate database, • And other parameters depending on vehicle provided confidentiality of personal data is thereafter configuration preserved. Child Restraints 2. Used in defense of litigation involving a Chrysler Everyone in your vehicle needs to be buckled up all the Group LLC product. time, including babies and children.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, an unrestrained child, even a tiny baby, can become a projectile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper restraint for the child’s size.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH child restraint anchorage system. Refer to restraint anchorage system. Refer to “LATCH — Child “LATCH — Child Seat Anchorage System (Lower Seat Anchorage System (Lower Anchors and Tether for Anchors and Tether for CHildren)”. CHildren)”. WARNING! Rearward-facing child seats must NEVER be used in the front seat of a vehicle with a front passenger airbag. An airbag deployment could cause severe injury or death to infants in this position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The lap portion should be low on the hips and as snug as possible. • Check belt fit periodically. A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back. NOTE: For additional information, refer to www.seatcheck.org or call 1–866–SEATCHECK.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • All passenger seating positions contain automatic locking retractors. However, any seat belt system will loosen with time, so check the belt occasionally and • Children who are large enough to wear the shoulder pull it tight if necessary.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE for the installation of the child restraint without using the vehicle’s seat belts. The two rear seating positions have lower anchorages that are capable of accommodating LATCH-compatible child seats having flexible, webbingmounted lower attachments or fixed lower attachments. Regardless of the specific type of lower attachment, NEVER install LATCH-compatible child seats such that two seats share a common lower anchorage.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Because the lower anchorages are to be introduced to passenger carrying vehicles over a period of years, child restraint systems having attachments for those anchorages will continue to have features for installation in vehicles using the lap or lap/shoulder belt. They will also have tether straps, and you are urged to take advantage of all of the available attachments provided with your child restraint in any vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In addition, there are tether strap anchorages behind each rear seating position. Access ports to the tether anchors are located in the panel between the rear seat and the rear window. The tether anchors are underneath access covers in the carpet covering the back of the seat where you see this symbol. 73 seat cover material.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE restraint installation, instead of tucking the seat belt behind the child restraint, route the seat belt through the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 In the rear seat, you may have trouble tightening the 2. Open the access port cover (A) behind the seat where lap/shoulder belt on the child restraint because the you are placing the child restraint. buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle-end belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Open the access cover (C) on the carpet covering the back of the seat and attach the tether strap hook (D) to the anchor. WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Transporting Pets Airbags deploying in the front seat could harm your pet.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 changes should be consistent with anticipated climate ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine and conditions under which vehicle operations will occur. For drivetrain (transmission and axle) in your vehicle. the recommended viscosity and quality grades refer to “Maintenance Procedures” in “Maintaining Your VeDrive moderately during the first 300 miles (500 km). hicle”.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SAFETY TIPS WARNING! (Continued) Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. • Be sure everyone in your vehicle is in a seat and using a seat belt properly. Exhaust Gas WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 If it is necessary to sit in a parked vehicle with the engine Safety Checks You Should Make Inside the running, adjust your heating or cooling controls to force Vehicle outside air into the vehicle. Set the blower at high speed. Seat Belts The best protection against carbon monoxide entry into Inspect the belt system periodically, checking for cuts, the vehicle body is a properly maintained engine exhaust frays, and loose parts.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Floor Mat Safety Information Always use floor mats designed to fit the foot well of your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Check mounting of mats on a regular basis. Always properly reinstall and secure floor mats that have been removed for cleaning. • Always make sure that objects cannot fall into the driver foot well while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. • If required, mounting posts must be properly installed, if not equipped from the factory.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Convertible Top Operation . . . . . . . . . . . . . . . . 87 ▫ Power Convertible Top Usage Precautions . . . . 88 ▫ Cargo Shield . . . . . . . . . . . . . . . . . . . . . . . . 92 ▫ Power Convertible Top Controls . . . . . . . . . . . 94 ▫ Lowering The Power Convertible Top . . . . . . . 95 ▫ Raising The Power Convertible Top . . . . . . . . 96 ▫ Wind Stop — If Equipped . . . . . . . . . . . . . . . 97 ▫ Emergency Bypass Mode (To Raise The Top Only) . .
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Voice Command — If Equipped . . . . . . . . . . . 112 ▫ Automatic Headlights — If Equipped . . . . . . 124 䡵 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 ▫ Headlights With Wipers (Available With Automatic Headlights Only) . . . . . . . . . . . . 125 ▫ Power Seats . . . . . . . . . . . . . . . . . . . . . . . . 113 ▫ Heated Seats — If Equipped . . . . . . . . . . . . 114 ▫ Recliner Adjustment . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 䡵 Windshield Wipers And Washers . . . . . . . . . . 130 ▫ To Accelerate For Passing . . . . . . . . . . . . . . 137 ▫ Intermittent Wiper System . . . . . . . . . . . . . . 131 䡵 Garage Door Opener — If Equipped . . . . . . . . 138 ▫ Mist Feature . . . . . . . . . . . . . . . . . . . . . . . . 132 ▫ Programming HomeLink威 . . . . . . . . . . . . . . 139 ▫ Headlights With Wipers (Available With Auto Headlights Only) . . . . . . . . . . . . . . . .
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Console Features . . . . . . . . . . . . . . . . . . . . . . 149 䡵 Rear Window Features . . . . . . . . . . . . . . . . . . 151 ▫ Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 ▫ Sliding Armrest — If Equipped . . . . . . . . . . 151 ▫ Rear Window Defroster . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONVERTIBLE TOP OPERATION CAUTION! Failure to follow these cautions may cause interior water damage, stains or mildew on the top material: • Avoid high-pressure car washes, as they can damage the top material. Also, increased water pressure may force past the weather strips. • Remove any standing water from the top and dry the surface before opening it.
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When operating the power convertible top, the trunk lid will pivot at the rear of the vehicle, swing open by the rear window, and then pivot backward. This allows room for the top to retract into or unfold from its stowage area in the trunk. Spring-loaded flipper doors, which provide clearance for the linkage, close off notches in the quarter trim panels when the top is down.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Power Top Control Module (PTCM) monitors and controls lowering and raising of the top. A series of micro-switches verify that operations are complete before allowing the next stage of lowering or raising operation. • Opening and closing the top consecutively without the engine running may run the battery down.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! CAUTION! (Continued) Before operating the power top: • Always check the tonneau cover area to be sure that it is clear of debris or other items. • Make sure the ambient temperature is above 32°F (0°C). • Never attempt to lower a frozen convertible top. Wait until the top is thawed before lowering it into the stowage compartment. Lowering a cloth top at temperatures below 32°F (0°C) should be avoided.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 CAUTION! (Continued) CAUTION! (Continued) • Do not allow the top to remain in the suspended position. After approximately 10 minutes in the suspended position, the hydraulic pressure will release, which will allow the top and the trunk lid to lower. Pressing the power top switch will cancel this operation. • Always use a normal ice scraper to remove snow or ice from the rear window.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • Never place any extremities (hands, feet, etc.) near the convertible top components, the upper windshield area, the shelf area behind the rear seats, or the convertible top stowage area while raising or lowering the convertible top. • When using the power top button on RKE transmitter, if potential danger exists while lowering the top, release the button immediately to interrupt the operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Positioning the Cargo Shield for Top Operation Pull the cargo shield toward you to begin unfolding the panels. Grasp the handle in the center of the outermost (top) panel and raise the cargo shield. Then, align and seat the tabs at each end of the cargo shield in the V slots in the trunk liner as shown in the illustration. 3 CAUTION! Do NOT place items on cargo protector.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To stow the cargo shield, grasp the handle of the upright panel of the cargo shield, lifting the pins out of the V slots in the trunk trim. Continue folding the upright panel forward onto the horizontal panel, then grasp both panels and lift them to the forward, upright position in the trunk. Stowed Cargo Shield NOTE: The convertible top will NOT operate with the cargo shield in the stowed position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 There is also a power top button on the Remote Keyless Lowering the Power Convertible Top Entry (RKE) transmitter for remotely lowering the power Using the Power Top Switch convertible top. NOTE: The power top switch will operate when the ignition switch is turned to the ON or ACC position and when in the power accessory delay. There are two Top Down switch positions. Press and hold the switch to the first detent.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press and hold the switch in the Top Up position until the operation of raising the top NOTE: Steps 1 – 3 must be performed within five and latching it is complete, which is indicated seconds. by the system raising the windows and dis1. Press and release the UNLOCK button on the RKE playing “TOP DONE” in the odometer or “CONVERTIBLE TOP COMPLETE” in the EVIC (if equipped). transmitter. Using the Remote Keyless Entry Transmitter 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manually Closing the power convertible top manually is a complicated and physically demanding procedure, and it requires a special tool to do so. In the event that you experience a malfunction when operating the power convertible top: 97 Wind Stop — If Equipped The Wind Stop installs in the backseat area of the vehicle. The Wind Stop will not interfere with power top operation. Therefore, it can remain installed when the top is up.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The frames must lie flat on each other in order to 4. Pivot the small frame (1) away from the large frame (2) snap them together. until the pivot lock (3) engages to lock the two frames in an L shape.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Unfold both stems at the rear of the large frame. 99 6. Align and insert the stems into the slot in each trim panel.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 7. Align the pins at the front of the large frame with the Disengage the pivot lock (1) to fold the small frame flat hole in each trim panel. Slide the pins outward until fully onto the large frame. Disengage the frame lock (2) to disconnect the small frame from the large frame. extended into each hole. Removing and Storing the Wind Stop Reverse the installation procedure to remove, fold, and store the Wind Stop.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 (EVIC) – if equipped, or in the Odometer for vehicles not Power Convertible Top Operation and Warning equipped with the EVIC.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE EVIC Message〫 EVIC Message Display Time〫 CONVERT- 9 sec. IBLE TOP COMPLETE SECURE CARGO SHIELD 9 sec. Odometer Message (< 5 mph [8 km/ h])〫〫 TOP DONE SET CARGO SHIELD Odometer Message Display Time〫〫 Display Scrolls for 6 sec. Display Scrolls for 9 sec.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE EVIC Message〫 EVIC Message Display Time〫 CONVERT- Until OpIBLE TOP eration is NOT SEComplete CURED Odometer Message (< 5 mph [8 km/ h])〫〫 TOP nOT SECUrE Odometer Message Display Time〫〫 Until Operation is Complete Odometer Message (> 5 mph [8 km/ h])〫〫 TOP nOT SECUrE 103 Odometer Message Display Time〫〫 Chime Condition Operator Action Required Until Operation is Complete Single Chime The System Fails to Complete Operation of Lowering or Raising the Top
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE EVIC Message〫 EVIC Message Display Time〫 SPEED 9 sec. TOO HIGH Odometer Message (< 5 mph [8 km/ h])〫〫 SPEED TOO HIGH Odometer Message Display Time〫〫 Display Scrolls for 9 sec. Odometer Message (> 5 mph [8 km/ h])〫〫 TOP Odometer Message Display Time〫〫 Chime Condition Operator Action Required 6 sec. Single Chime You Are Operating the Power Top at a Vehicle Speed Greater Than 0 mph (0 km/h) The Top Will Not Operate Unless the Vehicle is Stationary.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE EVIC Message〫 EVIC Message Display Time〫 TRUNK AJAR Continuous CONVERT- 6 sec. IBLE TOP MALFUNCTION Odometer Message (< 5 mph [8 km/ h])〫〫 DECK TOP FAIL Odometer Message Display Time〫〫 Continuous Display Scrolls for 6 Seconds Odometer Message (> 5 mph [8 km/ h])〫〫 DECK TOP 105 Odometer Message Display Time〫〫 Chime Condition Operator Action Required Continuous Single Chime The Trunk Lid is Unlatched or Open 6 sec.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE EVIC Message〫 EVIC Message Display Time〫 Odometer Message (< 5 mph [8 km/ h])〫〫 CONVERT- Until Fault TOP FAIL IBLE TOP is No MALLonger FUNCTION Detected or Repaired Odometer Message Display Time〫〫 Display Scrolls until Fault is No Longer Detected or Repaired Odometer Message (> 5 mph [8 km/ h])〫〫 TOP Odometer Message Display Time〫〫 Chime Display Single Flashes Chime until Fault is No Longer Detected or Repaired Condition Operator Action Required The
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 • If you are trying to lower the top and ambient temperature is 0°F (-18°C) or lower, wait until the temperature rises and the top is thawed and dry before operating the power top. A soft top should not be lowered at temperatures below 32°F (0°C). • If you are trying to raise the top and ambient temperature is below -40°F (-40°C), wait until the temperature rises before operating the power top.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Emergency Bypass Mode (To Raise the Top Only) This procedure is only to be used to raise the top when the top cannot be returned to the UP (raised) position by pressing the POWER TOP switch or is in a position in which the vehicle cannot be driven. Please follow these emergency bypass instructions to return the top to the UP (raised) position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 MIRRORS Automatic Dimming Mirror This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light next to the button will illuminate to indicate when the dimming feature is activated.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirrors To receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirror. Power Mirrors The power mirror switch is located on the driver’s door trim. A rotary knob selects the left mirror, right mirror or off position. NOTE: The passenger side convex outside mirror will give a much wider view to the rear, and especially of the lane next to your vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 After selecting a mirror, move the knob in the same Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This direction you want the mirror to move. When finished, feature is activated whenever you turn on the rear return the knob to the center “O” (Off) position to guard window defroster. Refer to “Rear Window Features” in against accidentally moving a mirror position.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Vanity Mirror — If Equipped Uconnect™ Phone — IF EQUIPPED A vanity mirror is attached to the inside face of the sun Refer to “Uconnect™ Phone” in the Uconnect™ User visor. To use the mirror, rotate the sun visor downward Manual located on the DVD for further details. and flip the mirror cover upward. VOICE COMMAND — IF EQUIPPED Voice Command can be initiated by pressing the VR located on the radio or steering wheel button controls (if equipped).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 SEATS Seats are a primary part of the Occupant Restraint System of the vehicle. They need to be used properly for safe operation of the vehicle. WARNING! • DO NOT allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Be sure everyone in your vehicle is in a seat and using a seat belt properly.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 WARNING! CAUTION! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. • Do not place anything on the seat that insulates against heat, such as a blanket or cushion.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Recliner Adjustment The recliner control is on the outboard side of the seat. To recline the seat, lean forward slightly and lift the lever. Then lean back to the position desired and release the lever. To return the seatback to its normal upright position, lean forward and lift the lever. Release the lever once the seatback is in the upright position. Seatback Adjustment WARNING! • Adjusting a seat while the vehicle is moving is dangerous.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 3 Lumbar Support Easy Entry Lever Pull the lever upward to move the seat and seatback Easy Entry System The Easy Entry lever is located on upper seat belt anchor forward. cover. When returning the seat to its normal position, the memory feature restores the seat position and seatback recline position to their current settings.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On the driver seat, pull the lever upward to move the seatback forward. When returning the seatback to its normal position the memory feature restores the seatback recline position to its current setting. Adjusting Active Head Restraints Active Head Restraints can reduce the risk of injury in the event of a rear impact. The Active Head Restraint should be adjusted so the top of the head restraint is located above the top of your ear.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To raise the head restraint, pull upward on the head restraint (on some models, you may need to press the push button). To lower the head restraint, press the push button, located at the base of the head restraint, and push downward on the head restraint. 119 For comfort the Active Head Restraints can be tilted forward and backward. To tilt the head restraint closer to the back of your head, pull outward on the bottom of the head restraint.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • In the event of deployment of an Active Head Restraint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Your Vehicle” for further information. WARNING! Active Head Restraint (Tilted) NOTE: • The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players. These items may interfere with the operation of the Active Head Restraint in the event of an accident and could result in serious injury or death. • Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Move to the outside of the vehicle and lift the secondary latch underneath the center front edge of the hood and raise the hood. Hood Prop Rod Hole Location Before closing the hood, make sure to stow the prop rod in its proper location. Hood Safety Catch Use the hood prop rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the underside of the hood.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. WARNING! 123 LIGHTS Multifunction Lever The multifunction lever on the left side of the steering column controls the operation of the headlights, parking lights, turn signal lights, instrument panel lights, instrument panel light dimming, interior lights and fog lights (if equipped).
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights And Parking Lights Turn the end of the multifunction lever to the first detent for parking light operation. Turn the end of the lever to the second detent for headlight operation. Lights-On Reminder If the headlights or parking lights are on after the ignition is turned to the LOCK position, a chime will sound to alert the driver when the driver’s door is opened.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights with Wipers (Available with Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Instrument Panel Dimmer Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the parking lights or headlights are on.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 NOTE: The front fog lights will only operate with the Fog Lights — If Equipped To activate the front fog lights, turn on the parking headlights on low beam. Selecting high beam headlights lights or the low beam headlights and pull out on will turn off the front fog lights. the end of the multifunction lever.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. High/Low Beam Switch Push the multifunction lever away from you to switch the headlights to high beam.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Lights Two courtesy/reading lights are located in the bottom of the rearview mirror. You can turn these lights on and off from the switches in the mirror or from the dimmer control in the multifunction lever. These lights are also controlled automatically by the Illuminated Entry System. Courtesy/Reading Light Switches 129 A courtesy light is also found in the rear of the center console.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS The windshield wiper/washer control lever is located on the right side of the steering column. Changing Wiper Speeds NOTE: The wipers will automatically return to the “Park” position if you turn the ignition switch OFF while they are operating.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Sudden loss of visibility through the windshield could lead to an accident. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with defroster before and during windshield washer use. Mist Feature Push downward on the windshield wiper/washer control lever to activate a single wipe cycle to clear the windshield of road mist or spray from a passing vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights with Wipers (Available with Auto Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever (on the left side of the steering column) is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column. To unlock the steering column, push the control handle downward. To tilt the steering column, move the steering wheel upward or downward as desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 NOTE: In order to ensure proper operation, the Electronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic The Electronic Speed Control lever is located on the right Speed Control ON/OFF button and resetting the desired side of the steering wheel. vehicle set speed.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Leaving the Electronic Speed Control on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system off when you are not using it. To Set a Desired Speed Turn the Electronic Speed Control ON. When the vehicle reaches the speed desired, press down on the lever and release SET DECEL.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ACCEL lever. If the lever is continually held in the RESUME ACCEL position, the set speed will continue to increase until the lever is released, then the new set speed will be established. Tapping RESUME ACCEL once will result in a 1 mph (2 km/h) speed increase. Each time the lever is tapped, speed increases so that tapping the lever three times will increase speed by 3 mph (5 km/h), etc.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On steep hills, a greater speed loss or gain may occur so The HomeLink威 buttons that are located in the headliner it may be preferable to drive without Electronic Speed or sun visor designate the three different HomeLink威 Control. channels. WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control. An accident could be the result.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Your motorized door or gate will open and close while you are training the universal transceiver. Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards. This includes most garage door opener models manufactured after 1982.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Place the handheld transmitter 1 to 3 in (3 to 8 cm) away • After training a HomeLink威 channel, if the garage from the HomeLink威 button you wish to program while door does not operate with HomeLink威 and the gakeeping the indicator light in view. rage door opener was manufactured after 1995, the garage door opener may have a rolling code. If so, 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 This can usually be found where the hanging antenna 6. Firmly press and release the LEARN or TRAINING wire is attached to the garage door opener motor. It is button. The name and color of the button may vary by NOT the button normally used to open and close the manufacturer. door. NOTE: You have 30 seconds in which to initiate the next step after the LEARN button has been pressed. 7.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using HomeLink威 To operate, press and release the programmed HomeLink威 button. Activation will now occur for the trained device (i.e., garage door opener, gate operator, security system, entry door lock, home/office lighting, etc.,). The handheld transmitter of the device may also be used at any time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 successfully accepted the frequency signal. The indica- Troubleshooting Tips tor light will flash slowly and then rapidly when fully If you are having trouble programming HomeLink威, here are some of the most common solutions: trained. If you unplugged the device for training, plug it back in • Replace the battery in the original transmitter. at this time. • Press the LEARN button on the Garage Door Opener to complete the training for a Rolling Code.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. This device must accept any interference that may be NOTE: Do not exceed the maximum power of 160 Watts received including interference that may cause undesired (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will operation. need to be replaced. NOTE: • The transmitter has been tested and it complies with The instrument panel power outlet, located below the FCC and IC rules.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 3 Instrument Panel Power Outlet The center console power outlet is powered directly from the battery (power available at all times). Items plugged into this power outlet may discharge the battery and/or prevent the engine from starting. Center Console WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) CAUTION! (Continued) • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly. Only use these intermittently and with greater caution.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED An optional ash receiver is available from your authorized dealer and will fit in the center console front cupholder. 147 CAUTION! For vehicles equipped with the heated and cooled cupholder, locate the cup holder ash receiver in the forward cupholder. The optional ash receiver also comes with a cigar lighter.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Front Seat Cupholder The cupholder in the center console will accommodate either two large size cups or two 20 oz. (.5 L) bottles or cans. The one-piece insert can be removed easily for cleaning. An optional removable ashtray may be located in one of the cupholders. Rear Seat Cupholders Cupholders for the rear seat occupants are located in the armrests. Each cupholder is capable of holding up to a 20 oz. (.5 L) bottle or can.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 WARNING! If containers of hot liquid are place in the cupholder, they can spill when the door is closed, burning the occupants. Be careful when closing the doors to avoid injury. 3 CONSOLE FEATURES Storage The center console contains a cubby bin with flip-down cover located below the climate controls. This compartment also contains a 12 Volt electrical outlet. Cubby Bin WARNING! Two separate storage compartments are also located underneath the armrest.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also contains a 12 Volt power outlet and a molded-in coin holder (designed to hold various size coins). The console’s front opening lid allows for easy access to these compartments.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Sliding Armrest — If Equipped REAR WINDOW FEATURES On some models the center console armrest slides forRear Window Defroster ward and rearward for added user comfort. The rear window defroster button is located on the climate control (Mode) knob. Press this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 156 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 157 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 158 䡵 Electronic Vehicle Information Center (EVIC) – If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 172 ▫ Electronic Vehicle Information Center (EVIC) Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 ▫ Oil Change Required — If Equipped . . . . . .
154 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ List Button (Disc Mode For MP3/WMA Play) . . . . . . . . . . . . . . . . . . . . 195 ▫ Info Button (Disc Mode For MP3/WMA Play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 䡵 Media Center 730N/430 (RER/REN/RBZ) — AM/FM Stereo Radio And CD/DVD/HDD/ NAV — If Equipped . . . . . . . . . . . . . . . . . . . . 198 ▫ Operating Instructions — Voice Command System — If Equipped . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 155 ▫ Operating Instructions - Uconnect™ Phone (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . 223 䡵 Remote Sound System Controls — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 228 䡵 Uconnect™ Multimedia (Satellite Radio) — If Equipped (REN/REQ/RER/RBZ/RES Radios Only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 ▫ Right-Hand Switch Functions . . . . . . . . . . . . 228 ▫ System Activation . . . . . . . . . . . . .
156 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 2 3 4 5 — Air Outlet — Side Window Demister Outlet — Instrument Cluster — Ignition Switch — Analog Clock 6 — Radio 7 — Passenger Airbag 8 — Glove Compartment 9 — Heated Seat Switch – If Equipped 10 — Electronic Stability Control Off Button – If Equipped 11 — Hazard Switch 12 — Storage Compartment 13 — Climate Control 14 — Trunk Release Button 15 — Power Top Switch
UNDERSTANDING YOUR INSTRUMENT PANEL 157 INSTRUMENT CLUSTER 4
158 UNDERSTANDING YOUR INSTRUMENT PANEL removes this heat. You can also turn the Temperature control to maximum heat, the Mode control to Floor and 1. Temperature Gauge the Fan control to High. This allows the heater core to act The temperature gauge shows engine coolant temperaas a supplement to the radiator and aids in removing heat ture. Any reading below the red area of the gauge shows from the engine cooling system. that the engine cooling system is operating properly.
UNDERSTANDING YOUR INSTRUMENT PANEL 159 If jump starting is required, refer to “Jump Starting 5. Low Fuel Light When the fuel level drops to approximately 2.0 gal- Procedures” in “What To Do In Emergencies”. lons (7.6 Liters), the fuel symbol will light and a 7. Airbag Warning Light single chime will sound. The light comes on and remains on for six to NOTE: This light will remain on until a minimum of eight seconds as a bulb check when the ignition switch is first turned ON.
160 UNDERSTANDING YOUR INSTRUMENT PANEL you do not buckle up, the light will remain on. Refer to 10. Engine Temperature Warning Light “Occupant Restraints” in “Things To Know Before StartThis light warns of an overheated engine condition. If the engine is critically hot, a warning chime ing Your Vehicle” for further information. will sound 10 times. After the chime turns off, the 9. Oil Pressure Warning Light engine will still be critically hot until the light goes out.
UNDERSTANDING YOUR INSTRUMENT PANEL 161 The light will remain on until the cause is corrected. In the event of an EBD failure, the Brake Warning Light will turn on along with the ABS Light. Immediate repair NOTE: The light may flash momentarily during sharp to the ABS system is required. cornering maneuvers which change fluid level conditions. The vehicle should have service performed, and The operation of the Brake Warning Light can be checked the brake fluid level checked.
162 UNDERSTANDING YOUR INSTRUMENT PANEL the same as it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service. It is a good idea for you to make a record of the odometer reading before the repair/service, so that you can be sure that it is 13.
UNDERSTANDING YOUR INSTRUMENT PANEL 163 Vehicle Odometer Messages LoW TirE When the appropriate conditions exist, the odometer will When the appropriate condition exists, the odometer display the following messages: display will toggle between LoW and TirE for three cycles. door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Door Ajar HOTOIL deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trunk Ajar When this message is displayed there is a transmission TOP nOT SECUrE . . . . . .
164 UNDERSTANDING YOUR INSTRUMENT PANEL tighten the fuel filler cap properly and press the odometer reset button to turn off the “gASCAP” message. (Refer to “Onboard Diagnostic System — OBDII” in “Maintaining Your Vehicle” for further information). If the problem continues, the message will appear the next time the vehicle is started. See your authorized dealer service center as soon as possible. To turn off the message temporarily, press and release the Trip Odometer button on the instrument cluster.
UNDERSTANDING YOUR INSTRUMENT PANEL 165 Dual Trip Odometer — If Equipped 15. Cruise Indicator — If Equipped This indicator shows that the Electronic Speed Press and release this button to change the display from odometer to “Trip A.” Press and release it a second time Control System is ON. to change the display to “Trip B.” Press and release it a 16. Odometer/Trip Odometer Reset Button third time to change the display back to the odometer.
166 UNDERSTANDING YOUR INSTRUMENT PANEL If the light is flashing when the engine is running you 20. Turn Signal Indicators The arrows will flash in unison with the exterior may experience power loss, an elevated/rough idle, and turn signal, when using the turn signal lever. increased brake pedal effort, and your vehicle may require towing. Immediate service is required. 21.
UNDERSTANDING YOUR INSTRUMENT PANEL 167 If the ABS light remains on or comes on during driving, 24. Electronic Stability Control (ESC) Malfunction it indicates that the Anti-Lock portion of the brake system Indicator Light — If Equipped The “ESC Malfunction Indicator Light” in the is not functioning and that service is required, however, instrument cluster will come on when the the conventional brake system will continue to operate ignition switch is turned to the ON position.
168 UNDERSTANDING YOUR INSTRUMENT PANEL • Each time the ignition is turned ON, the ESC system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. will be ON even if it was turned off previously. Accordingly, when the low tire pressure telltale illumi• The ESC system will make buzzing or clicking sounds nates, you should stop and check your tires as soon as when it is active.
UNDERSTANDING YOUR INSTRUMENT PANEL system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended.
170 UNDERSTANDING YOUR INSTRUMENT PANEL 26. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of an onboard diagnostic system called OBD that monitors emissions, engine, and automatic transmission control systems. The light will illuminate when the key is in the ON position before engine start. If the bulb does not come on when turning the key from LOCK to ON, have the condition checked promptly. Certain conditions such as a loose or missing gas cap, poor fuel quality, etc.
UNDERSTANDING YOUR INSTRUMENT PANEL 27. Transmission Temperature Warning Light — If Equipped This light indicates that the transmission fluid temperature is running hot. This may occur with severe usage, such as trailer towing. If this light turns on, safely pull over and stop the vehicle. Then, shift the transmission into NEUTRAL and run the engine at idle or faster until the light turns off.
172 UNDERSTANDING YOUR INSTRUMENT PANEL The EVIC consists of the following: ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) – IF EQUIPPED • System Status The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the • Vehicle information warning message displays instrument cluster.
UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by pressing the following buttons on the instrument panel switch bank located below the climate controls: 173 Press and release the RESET Button to accept a selection. The RESET Button also resets various Trip Functions.
174 UNDERSTANDING YOUR INSTRUMENT PANEL • RKE (Remote Keyless Entry) Battery Low (with a • Speed Too High (with a single chime) single chime) • Convertible Top Malfunction (with a single chime) • Personal Settings Not Available – Vehicle Not in Park • Oil Change Required (with a single chime) • Personal Settings Not Available – Vehicle in Motion Oil Change Required — If Equipped • Left/Right Door Ajar (one or more, with a single Your vehicle is equipped with an engine oil change chime if speed is above 1
UNDERSTANDING YOUR INSTRUMENT PANEL 175 release the Menu button. To reset the oil change indicator • Elapsed Time system (after performing the scheduled maintenance) • Display Units of Measure in perform the following procedure: Press and release the STEP button to advance the display 1. Turn the ignition switch to the ON position (Do not through the Trip Functions. start the engine). The Trip Functions mode displays the following informa2.
176 UNDERSTANDING YOUR INSTRUMENT PANEL and average fuel economy, according to the current fuel • Display Units In: tank level. DTE cannot be reset through the RESET To make your selection, press and release the RESET button. button until “ENGLISH” or “METRIC” appears. NOTE: Significant changes in driving style or vehicle To Reset The Display loading will greatly affect the actual drivable distance of Reset will only occur if a resettable function is currently displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated temperature is displayed. Engine temperature can also affect the displayed temperature, therefore temperature readings are not updated when the vehicle is not moving. Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to calibrate the compass manually.
178 UNDERSTANDING YOUR INSTRUMENT PANEL 5. Drive the vehicle slowly, completing one or more circles (in an area free from large metal or metallic objects) until the CAL indicator turns off. The compass will now function normally. Compass Variance Compass Variance is the difference between magnetic North and Geographic North. In some areas of the country, the difference between magnetic and geographic North is great enough to cause the compass to give false readings.
UNDERSTANDING YOUR INSTRUMENT PANEL 179 3. Press and release the STEP button until “Compass Press and release the MENU button until “Personal Variance” and the current Variance Value displays in the Settings” displays in the EVIC. EVIC. Press and release the STEP button to display the follow4.
180 UNDERSTANDING YOUR INSTRUMENT PANEL Remote Key Unlock When Driver Door 1st Press is selected, only the driver’s door will unlock on the first press of the Remote Keyless Entry (RKE) transmitter UNLOCK button. When Driver Door 1st Press is selected, you must press of the RKE transmitter UNLOCK button twice to unlock the passenger’s doors. When All Doors 1st Press is selected, all of the doors will unlock on the first press of the RKE transmitter UNLOCK button.
UNDERSTANDING YOUR INSTRUMENT PANEL 181 off if they were turned on by this feature. To make your Illuminated Approach selection, press and hold the RESET button until ON or When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are OFF appears. unlocked with the remote keyless entry transmitter. To NOTE: Turning the headlights on during the daytime make your selection, press and hold the RESET button causes the instrument panel lights to dim.
182 UNDERSTANDING YOUR INSTRUMENT PANEL SETTING THE ANALOG CLOCK MEDIA CENTER 230 (REQ) — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. To set the analog clock, located at the top center of the instrument panel, press and hold the button in until the setting is correct. The clock will adjust slowly at first and then quicker the longer the button is held.
UNDERSTANDING YOUR INSTRUMENT PANEL 183 to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON or ACC another selection. Holding either button will bypass position to operate the radio. stations without stopping until you release it. Power Switch/Volume Control (Rotary) SCAN Button Push the ON/VOLUME control knob to turn on the Pressing the SCAN button causes the tuner to search for radio.
184 UNDERSTANDING YOUR INSTRUMENT PANEL Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone feature (if equipped). Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob.
UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in AM, FM or Satellite (if equipped) frequencies. 185 Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones.
186 UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
UNDERSTANDING YOUR INSTRUMENT PANEL 187 By pressing the SEEK button when the Music Type icon • DVD Enter - When the disc is in DVD Menu mode, is displayed, the radio will be tuned to the next frequency selecting DVD Enter will allow you to play the current station with the same selected Music Type name. The highlighted selection. Use the remote control to scroll Music Type function only operates when in the FM up and down the menu (if equipped). mode.
188 UNDERSTANDING YOUR INSTRUMENT PANEL • Angle – Repeatedly pressing SELECT will change • Set Home Clock - Pressing the SELECT button allows the viewing angle if supported by the DVD disc (if you to set the clock. Turn the TUNE/SCROLL control equipped). knob to adjust the hours and then press and turn the TUNE/SCROLL control knob to adjust the minutes. NOTE: Press the TUNE/SCROLL control knob again to save • The available selections for each of the above entries changes. varies depending upon the disc.
UNDERSTANDING YOUR INSTRUMENT PANEL Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc). You can select a language not listed by scrolling down and selecting ⬙other.⬙ Enter the country code using the TUNE/SCROLL control knob to scroll up and down to select the number and then push to select.
190 UNDERSTANDING YOUR INSTRUMENT PANEL a disc is loaded, changes will not be effective. Also, the both AM and FM. This allows a total of 12 AM, 12 FM, defaults are effective only if the disc supports the and 12 Satellite (if equipped) stations to be stored into pushbutton memory. The stations stored in SET 2 customer-preferred settings. memory can be selected by pressing the pushbutton AM and FM Buttons twice. Press the buttons to select AM or FM mode.
UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play, DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These region codes must match in order for the disc to play. If the region code for the DVD disc does not match the region code for the radio DVD player, it will not play the disc. Customers may take their vehicle to an authorized dealer to change the region code of the player a maximum of five times.
192 UNDERSTANDING YOUR INSTRUMENT PANEL Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton with the corresponding number (1-6) where the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙EJECTING DISC⬙ when the disc is being ejected and prompt the user to remove the disc. SCAN Button (CD MODE) Press the SCAN button to scan through each track on the CD currently playing.
UNDERSTANDING YOUR INSTRUMENT PANEL 193 The radio uses the following limits for file systems: Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however, acceptable • Maximum number of directory levels: 8 MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the • Maximum number of files: 255 following restrictions.
194 UNDERSTANDING YOUR INSTRUMENT PANEL If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. MPEG Specification Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.MP3/WMA extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3/WMA and will not play the file.
UNDERSTANDING YOUR INSTRUMENT PANEL 195 Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files. LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob.
196 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds to return to ⬙elapsed time⬙ display. SCAN Button (Auxiliary Mode) No function. Operation Instructions - Auxiliary Mode EJECT Button (Auxiliary Mode) The auxiliary (AUX) jack is an audio input jack which No function.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Voice Command System (If Equipped) For the radio, Refer to “Voice Command” in the Uconnect™ User Manual located on the DVD for further details. 197 Operating Instructions - Video Entertainment System (VES)™ (If Equipped) Refer to “Video Entertainment System (VES)™” in the Uconnect™ User Manual located on the DVD for further details. Refer to the Uconnect™ User Manual located on the DVD Dolby威 for further details.
198 UNDERSTANDING YOUR INSTRUMENT PANEL DTS™ Operating Instructions — Voice Command ⬙DTS™⬙ and ⬙DTS™ 2.0⬙ are trademarks of Digital The- System — If Equipped Refer to “Voice Command” in the Uconnect™ User ater Systems, Inc. Manual located on the DVD for further details.
UNDERSTANDING YOUR INSTRUMENT PANEL 3. To move the hour forward, touch the screen where the word “Hour” with the arrow pointing upward is displayed. To move the hour backward, touch the screen where the word “Hour” with the arrow pointing downward is displayed. 199 2. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.
200 UNDERSTANDING YOUR INSTRUMENT PANEL satellite clock is Greenwich Mean Time (GMT). This is the worldwide standard for time. This makes the system’s 1. Turn on the radio. clock very accurate once the appropriate time zone and 2. Touch the screen where the time is displayed. The daylight savings information is set. clock setting menu will appear on the screen. To Manually Set the Clock — RER/REN 3. Touch the screen where the words “Set Time Zone” are 1. Turn on the radio. displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL 201 displayed. To move the minute backward, touch the Show Time if Radio is Off screen where the word “Min” with the arrow pointing When selected, this feature will display the time of day on the touch screen when the radio is turned off. Proceed downward is displayed. as follows to change the current setting: 6. To save the new time setting, touch the screen where 1. Turn on the radio. the word “Save” is displayed. Changing Daylight Savings Time 2.
202 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Touch the screen where “User Clock” is displayed, the clock setting menu will appear on the screen. 4. Touch the screen where the words “Set Time Zone” are displayed. The time zone selection menu will appear on the screen. 5. Select a time zone by touching the screen where your selection appears. If you do not see a time zone that you want to select, touch the screen where the word “Page” is displayed to view additional time zones in the menu. 6.
UNDERSTANDING YOUR INSTRUMENT PANEL 203 Power Switch/Volume Control (Rotary) TIME Button Push the ON/VOLUME control knob to turn on the Press the TIME button to alternate display of the time radio. Push the ON/VOLUME control knob a second and radio frequency. time to turn off the radio. Clock Setting Procedure Electronic Volume Control 1. Press and hold the TIME button until the hours blink. The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning 2.
204 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM or FM frequencies. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones.
UNDERSTANDING YOUR INSTRUMENT PANEL SET/RND Button — To Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory, press the SET/RND button. The symbol SET 1 will now show in the display window. Select the button (1 to 6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the SET/RND button, the station will continue to play but will not be stored into pushbutton memory.
206 UNDERSTANDING YOUR INSTRUMENT PANEL discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display. If a CD does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new disc can be loaded.
UNDERSTANDING YOUR INSTRUMENT PANEL 207 If you have ejected a disc and have not removed it within RW/FF 10 seconds, it will be reloaded. If the CD is not removed, Press and hold the FF (Fast Forward) button and the CD player will begin to fast forward until FF is released, or the radio will reinsert the CD but will not play it. RW or another CD button is pressed. The RW (Reverse) A disc can be ejected with the radio and ignition OFF. button works in a similar manner.
208 UNDERSTANDING YOUR INSTRUMENT PANEL Notes on Playing MP3 Files • Maximum number of files: 255 The radio can play MP3 files; however, acceptable MP3 • Maximum number of folders. (The radio display of file file recording media and formats are limited. When names and folder names is limited. For large numbers writing MP3 files, pay attention to the following restricof files and/or folders, the radio may be unable to tions.
UNDERSTANDING YOUR INSTRUMENT PANEL Discs created with an option such as ⬙keep disc open after writing⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
210 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 130 (RES/RSC) — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) AND SIRIUS RADIO 211 Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio. NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of the radio faceplate. Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
212 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it.
UNDERSTANDING YOUR INSTRUMENT PANEL 213 starting at Step 2. For vehicles not equipped with satellite radio, press the SETUP button and then follow the above 1. Press and hold the TIME button until the hours blink. procedure, starting at Step 2. 2. Adjust the hours by turning the right side TUNE/ INFO Button SCROLL control knob. Press the INFO button for an RDS station (one with call 3. After adjusting the hours, press the right side TUNE/ letters displayed).
214 UNDERSTANDING YOUR INSTRUMENT PANEL Setting the Tone, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the bass tones. Push the rotary TUNE/SCROLL control knob a fifth time and FADE will display. Turn the TUNE/SCROLL control knob to the left or right to adjust the sound level between the front and rear speakers.
UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button to select the following format types: Program Type No program type or undefined Adult Hits Classical Classic Rock College Country Foreign Language Information Jazz News Nostalgia Oldies 16-Digit Character Display None Adlt Hit Classicl Cls Rock College Country Language Inform Jazz News Nostalga Oldies Program Type Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40
216 UNDERSTANDING YOUR INSTRUMENT PANEL the minutes using the right side TUNE/SCROLL By pressing the SEEK button when the Music Type icon control knob. Press the TUNE/SCROLL control knob is displayed, the radio will be tuned to the next frequency to save time change. station with the same selected Music Type name. The Music Type function only operates when in the FM AM/FM Button mode. Press the button to select either AM or FM mode.
UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET/RND button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice.
218 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON/RUN and the EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number, and index time in minutes If you have ejected a disc and have not removed it within and seconds. Play will begin at the start of track 1. 10 seconds, it will be reloaded.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 Press the SET/RND button a second time to stop RanTIME Button Press this button to change the display from a large CD dom Play. playing time display to a small CD playing time display. Notes On Playing MP3 Files RW/FF The radio can play MP3 files; however, acceptable MP3 Press and hold FF (Fast Forward) and the CD player will file recording media and formats are limited.
220 UNDERSTANDING YOUR INSTRUMENT PANEL Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal Maximum number of folder levels: 8 CD audio tracks and computer files (including MP3 files). Discs created with an option such as ⬙keep disc open after Maximum number of files: 255 writing⬙ are most likely multisession discs. The use of Maximum number of folders.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 rates (VBR) are also supported. The majority of MP3 files Playback of MP3 Files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium VBR bit rates. contains a lot of folders or files, the radio will take more MPEG Sampling Bit Rate (kbps) time to start playing the MP3 files.
222 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 223 TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when the ignition is OFF). Uconnect™ Multimedia (SATELLITE RADIO) — IF EQUIPPED (REN/REQ/RER/RBZ/RES RADIOS ONLY) Satellite radio uses direct satellite-to-receiver broadcasting technology to provide clear digital sound, coast to Operating Instructions - Uconnect™ Phone (If coast.
224 UNDERSTANDING YOUR INSTRUMENT PANEL information, call the toll-free number 888-539-7474, or Sirius ID number will display. The Sirius ID number visit the Sirius web site at www.sirius.com, or at www- display will time out in two minutes. Press any button on the radio to exit this screen. .siriuscanada.ca for Canadian residents.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 bikes should be placed as far rearward as possible, within Operating Instructions - Uconnect™ Multimedia the loading design of the rack. Do not place items directly (Satellite) Mode on or above the antenna. NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
226 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button Pressing the INFO button will cycle the display information between Artist, Song Title, and Composer (if available). Also, pressing and holding the INFO button for an additional three seconds will make the radio display the Song Title all of the time (press and hold again to return to normal display). MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 227 the SET button twice and SET 2 will show in the display SETUP Button Pressing the SETUP button allows you to select the window. Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into following items: pushbutton memory. The channels stored in SET 2 • Display Sirius ID number — Press the AUDIO/ memory can be selected by pressing the pushbutton SELECT button to display the Sirius ID number. This twice.
228 UNDERSTANDING YOUR INSTRUMENT PANEL REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. The left and right controls are rocker-type switches with a pushbutton in the center of each switch. Reach behind the steering wheel to access the switches. Remote Sound System Controls (Back View Of Steering Wheel) Right-Hand Switch Functions • Press the top of the switch to increase the volume.
UNDERSTANDING YOUR INSTRUMENT PANEL 229 • Press the button located in the center of the switch to change to the next preset that you have programmed. • Press the top of the switch to SEEK the next listenable station up from the current setting. CD/DVD DISC MAINTENANCE Left-Hand Switch Functions for Radio Operation • Press the bottom of the switch to SEEK the next To keep a CD/DVD in good condition, take the following listenable station down from the current setting.
230 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particu- Manual Heating and Air Conditioning lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service. RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being on in your vehicle can cause erratic or noisy performance from your radio.
UNDERSTANDING YOUR INSTRUMENT PANEL Blower Control Rotate this control to regulate the amount of air forced through the ventilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position. There are four blower speeds. NOTE: For vehicles equipped with Remote Start, the climate controls will not function during Remote Start operation if the blower control is left in the “O” (Off) position.
232 UNDERSTANDING YOUR INSTRUMENT PANEL Mode Control (Air Direction) Rotate this control to choose from several patterns of air distribution. You can select either a primary mode as identified by the symbols on the control, or a blend of two of these modes. The closer the setting is to a particular symbol, the more air distribution you receive from that mode. NOTE: For all settings except full cold or full hot, there is a difference in temperature between the upper and lower outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL Defrost Air is directed through the windshield and side window demist outlets. Use this mode with maximum blower and temperature settings for best windshield and side window defrosting. 233 will cause the LED in the control button to illuminate. After ten minutes, the system will return to normal mode function and the LED will turn off. NOTE: • Continuous use of the recirculation mode may make the inside air stuffy and window fogging may occur.
234 UNDERSTANDING YOUR INSTRUMENT PANEL • Recirculated air is not allowed in Floor, Mix or Defrost modes. If the Recirculation button is depressed while in any of these modes, the LED indicator will flash several times then go out. Recirculation will be disabled automatically is these modes are selected. NOTE: The air conditioning compressor will not engage until the engine has been running for about 10 seconds. • MAX A/C For maximum cooling use the A/C and recirculation buttons at the same time.
UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Temperature Control (ATC) — If Equipped 235 NOTE: The AUTO position performs best for front seat occupants only. Automatic Temperature Control 2. Dial in the temperature you would like the system to maintain by rotating the Temperature Control knob. Once the comfort level is selected, the system will maintain that level automatically using the heating system.
236 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Blower Control • The temperature setting can be adjusted at anytime For full automatic operation or for without affecting automatic operation. automatic blower operation turn the knob to AUTO position. In manual • Pressing the Air Conditioning Control button while in mode there are seven blower speeds AUTO mode will cause the LED in the control button that can be individual selected. In off to flash three times and then turn off.
UNDERSTANDING YOUR INSTRUMENT PANEL 237 4
238 UNDERSTANDING YOUR INSTRUMENT PANEL The operator can override the AUTO mode setting to • Floor change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets. • Panel Air is directed through the outlets in the instrument • Mix Air is directed through the floor, defrost, and side panel. These outlets can be adjusted to direct airflow.
UNDERSTANDING YOUR INSTRUMENT PANEL 239 NOTE: • Air Conditioner Control Press this button to turn on the air • When the ignition switch is turned to the LOCK conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is turned on, cool dehumidified air will • In cold weather, use of the Recirculation mode may lead to excessive window fogging.
240 UNDERSTANDING YOUR INSTRUMENT PANEL • Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation button. However, under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions are present, and the Recirculation button is pressed, the indicator will flash and then turn off. This tells you that you are unable to go into Recirculation Mode at this time.
UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Mix mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem, increase blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather. NOTE: Recirculate without A/C should not be used for long periods as fogging may occur.
242 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 247 ▫ Key Ignition Park Interlock . . . . . . . . . . . . . 252 ▫ Automatic Transmission . . . . . . . . . . . . . . . 247 ▫ Brake/Transmission Interlock System . . . . . . 252 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . 247 ▫ Automatic Transmission Ignition Interlock System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253 ▫ Extreme Cold Weather (Below ⫺20°F Or ⫺29°C) . . . . . . .
244 STARTING AND OPERATING 䡵 Driving On Slippery Surfaces . . . . . . . . . . . . . 260 ▫ Brake Assist System (BAS) . . . . . . . . . . . . . . 270 ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . . . . 260 ▫ Hill Start Assist (HSA) – If Equipped . . . . . . 271 ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 ▫ Electronic Stability Control (ESC) . . . . . . . . . 273 䡵 Driving Through Water . . . . . . . . . . . . . . . . . 261 䡵 Tire Safety Information . . . . . . . .
STARTING AND OPERATING 245 ▫ Tire Spinning . . . . . . . . . . . . . . . . . . . . . . . 290 ▫ 3.5L Engine . . . . . . . . . . . . . . . . . . . . . . . . 304 ▫ Tread Wear Indicators . . . . . . . . . . . . . . . . . 291 ▫ Reformulated Gasoline . . . . . . . . . . . . . . . . 305 ▫ Life Of Tire . . . . . . . . . . . . . . . . . . . . . . . . 292 ▫ Gasoline/Oxygenate Blends . . . . . . . . . . . . . 305 ▫ Replacement Tires . . . . . . . . . . . . . . . . . . . .
246 STARTING AND OPERATING ▫ Selection Of Engine Oil For Flexible Fuel Vehicles (E85) And Gasoline Vehicles . . . . . . 312 ▫ Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 ▫ Cruising Range . . . . . . . . . . . . . . . . . . . . . . 313 ▫ Replacement Parts . . . . . . . . . . . . . . . . . . . 313 ▫ Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 313 ▫ Overloading . . . . . . . . . . . . . . . . . . . . . . . . 317 ▫ Loading . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Do not leave the keys in the ignition.
248 STARTING AND OPERATING motor will continue to run, and it will disengage automatically when the engine is running. If the engine fails to start, the starter will disengage automatically in 10 seconds. If this occurs, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedure. WARNING! (Continued) WARNING! • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way.
STARTING AND OPERATING 249 the way to the floor and hold it there while cranking the With Tip Start engine. This should clear any excess fuel in case the If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather” proceengine is flooded. dures, it may be flooded. To clear any excess fuel, push CAUTION! the accelerator pedal all the way to the floor and hold it.
250 STARTING AND OPERATING ENGINE BLOCK HEATER — IF EQUIPPED AUTOMATIC TRANSMISSION The engine block heater warms the engine, and permits CAUTION! quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a Damage to the transmission may occur if the followgrounded, three-wire extension cord.
STARTING AND OPERATING 251 WARNING! • It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal.
252 STARTING AND OPERATING WARNING! (Continued) • Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the vehicle into PARK, remove the key from the ignition, and apply the parking brake. Once the key is removed from the ignition, the shift lever is locked in the PARK position, securing the vehicle against unwanted movement.
STARTING AND OPERATING 253 • Insert the ignition key into the ignition switch and Automatic Transmission Ignition Interlock System This system prevents the key from being removed unless rotate it to the ON position. the shift lever is in PARK. It also prevents shifting out of • Remove the cup holder liner. PARK unless the ignition switch is in the ON position, • Insert a key, screwdriver, or finger into the hole at the and the brake pedal is applied.
254 STARTING AND OPERATING Gear Ranges PARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while vehicle is in motion. Apply parking brake when leaving vehicle in this range. When parking on a flat surface, place the shift lever into the PARK position first, and then apply the parking brake.
STARTING AND OPERATING 255 REVERSE DRIVE – Six-Speed Transmission This range is for moving the vehicle backward. Use only This range should be used for most city and highway after the vehicle has come to a complete stop. driving. It provides the smoothest upshifts, downshifts, and best fuel economy. However, use the AutoStick威 NEUTRAL mode and select the appropriate gear when frequent This range is used when vehicle is standing for protransmission shifting occurs in the DRIVE range.
256 STARTING AND OPERATING under heavy loading conditions, (i.e., in hilly terrain, traveling into strong headwinds, or while towing heavy trailers). Under these conditions, using the ⬙3⬙ range will improve performance and extend transmission life by reducing excessive shifting and heat build-up. gear operation at higher speeds.
STARTING AND OPERATING CAUTION! If the transmission operating temperature exceeds acceptable limits, the vehicle computer will override DRIVE (OVERDRIVE) and [5] for six–speed AutoStick威 transmission and [3] for four–speed transmission, range by changing shift points. This is done to prevent transmission damage due to overheating. Reset Mode - Electronic Transmission The transmission is monitored electronically for abnormal conditions.
258 STARTING AND OPERATING NOTE: Even if the transmission can be reset, it is recommended that you visit a dealer at your earliest possible convenience. Your dealer has diagnostic equipment to determine if the problem could recur. Operation By placing the shift lever one shift-level below the DRIVE position, it can be moved from side to side. This allows the driver to select a higher or lower range of gears.
STARTING AND OPERATING General Information 259 • If a low range is selected and the engine accelerates to the rev limit, the transmission will automatically select the next higher ratio. • You can start out, from a stop, in any gear except sixth. The system will ignore attempts to upshift at too low • If a downshift would cause the engine to over-speed, of a vehicle speed. that shift will not occur until it is safe for the engine.
260 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Acceleration Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the front wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in the surface traction under the front (driving) wheels. WARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. You could lose control of the vehicle and possibly have an accident.
STARTING AND OPERATING DRIVING THROUGH WATER Driving through water more than a few inches/ centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising Water WARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water. Furthermore, flowing and/or rising water can carry your vehicle away swiftly.
262 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water. Do not continue to operate the vehicle if any fluid appears contaminated, as this may result in further damage.
STARTING AND OPERATING POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these conditions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers.
264 STARTING AND OPERATING Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticipated. Coordinate inspection efforts through an authorized dealer. CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components.
STARTING AND OPERATING The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as possible. To release the parking brake, pull the lever up slightly, press the center button, then lower the lever completely. 265 When the parking brake is applied with the ignition switch ON, the “Brake Warning Light” in the instrument cluster will illuminate.
266 STARTING AND OPERATING make it difficult to move the shift lever out of PARK. The parking brake should always be applied whenever the driver is not in the vehicle. WARNING! • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons.
STARTING AND OPERATING ANTI-LOCK BRAKE SYSTEM (ABS) The Anti-Lock Brake System (ABS) provides increased vehicle stability and brake performance under most braking conditions. The system operates with a separate computer to modulate the hydraulic pressure to prevent wheel lock-up and avoid skidding on slippery surfaces. WARNING! • Pumping of the anti-lock brakes will diminish their effectiveness and may lead to an accident. Pumping makes the stopping distance longer.
268 STARTING AND OPERATING The “Anti-Lock Brake Warning Light” monitors the Anti-Lock Brake System. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. (ABS) and Electronic Brake Force Distribution (EBD) Systems are not functioning. Immediate repair to the ABS system is required. See your authorized dealer. When the vehicle is driven over 7 mph (11 km/h), you may hear a slight clicking sound as well as some related motor noises.
STARTING AND OPERATING • the clicking sound of solenoid valves, • brake pedal pulsations, 269 All vehicle wheels and tires must be the same size and type, and tires must be properly inflated to produce accurate signals for the computer. • and a slight drop or fall away of the brake pedal at the ELECTRONIC BRAKE CONTROL SYSTEM end of the stop. Your vehicle may be equipped with an optional adThese are all normal characteristics of ABS.
270 STARTING AND OPERATING help avoid skidding on slippery surfaces during braking. Brake Assist System (BAS) Refer to “Anti-Lock Brake System” in “Starting and The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The Operating” for further information.
STARTING AND OPERATING WARNING! • The BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The BAS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
272 STARTING AND OPERATING The system will only work if the intended direction of the HSA Activation Criteria The following criteria must be met in order for HSA to vehicle and vehicle gear match. For example, if the intended direction is forward up a hill and the vehicle is activate: in DRIVE and the activation criteria are met, HSA will • Vehicle must be stopped activate.
STARTING AND OPERATING 2. Shift the transmission into NEUTRAL. 3. Apply the parking brake. 273 10. Repeat these steps if you want to return this feature to it’s previous setting. EVIC Equipped Vehicles HSA is a Customer Programmable Feature on a EVIC 5. Release the clutch pedal. equipped vehicle. If you wish to turn off the HSA feature, refer to “Electronic Vehicle Information Center (EVIC)/ 6. Rotate the steering wheel one-half turn to the left. Customer Programmable Features” in “Understanding 7.
274 STARTING AND OPERATING path does not match the intended path, ESC applies the brake of the appropriate wheel to assist in counteracting the oversteer or understeer condition • Over-steer - when the vehicle is turning more than appropriate for the steering wheel position. • Under-steer - when the vehicle is turning less than appropriate for the steering wheel position.
STARTING AND OPERATING ESC Malfunction Indicator Light The “ESC Malfunction Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON position. It should go out with the engine running. If the “ESC Malfunction Indicator Light” comes on continuously with the engine running, a malfunction has been detected in the ESC system.
276 STARTING AND OPERATING feature described in the TCS section, has been disabled and the “ESC Off Indicator Light” will be illuminated. All other stability features of ESC function normally, with the exception of engine power reduction. This mode is intended to be used if the vehicle is in deep snow, sand, or gravel conditions and more wheel spin than ESC would normally allow is required to gain traction. To turn ESC on again, momentarily press the “ESC Off” switch.
STARTING AND OPERATING TIRE SAFETY INFORMATION Tire Markings 277 NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter ⬙P⬙ is absent from this tire size designation.
278 STARTING AND OPERATING Tires designed to this standard have the letter “T” • High flotation tire sizing is based on U.S. design molded into the sidewall preceding the size designastandards and it begins with the tire diameter molded tion. Example: T145/80D18 103M. into the sidewall. Example: 31x10.5 R15 LT. Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....
STARTING AND OPERATING 279 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
280 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
STARTING AND OPERATING 281 Tire Terminology and Definitions Term B-Pillar Cold Tire Pressure Maximum Inflation Pressure Recommended Inflation Pressure Tire Placard Definition The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.
282 STARTING AND OPERATING Tire Loading and Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar.
STARTING AND OPERATING 283 Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard and in the “Vehicle Loading” section of this manual.
284 STARTING AND OPERATING available cargo and luggage load capacity is 650 lbs NOTE: (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs • The following table shows examples on how to calculate total load, cargo/luggage, and towing capacities [295 kg]). of your vehicle with varying seating configurations 5. Determine the combined weight of luggage and cargo and number and size of occupants. This table is for being loaded on the vehicle.
STARTING AND OPERATING 285 5
286 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Economy Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement.
288 STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter.
STARTING AND OPERATING 289 Tire Pressures for High Speed Operation Radial-Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important. Increased tire pressure and reduced vehicle poorly.
290 STARTING AND OPERATING WARNING! Temporary use spare tires are for emergency use only. With these tires, do not drive more than 50 mph (80 km/h). Temporary-use spare tires have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnings, which apply to your spare. Failure to do so could result in spare tire failure and loss of vehicle control.
STARTING AND OPERATING 291 Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies” for further information. WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for more than 30 seconds continuously when you are stuck, and do not let anyone near a spinning wheel, no matter what the speed.
292 STARTING AND OPERATING Life of Tire Replacement Tires The service life of a tire is dependent upon varying The tires on your new vehicle provide a balance of many factors including but not limited to: characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure.
STARTING AND OPERATING 293 WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have an accident resulting in serious injury or death.
294 STARTING AND OPERATING TIRE CHAINS Snow tires generally have lower speed ratings than what Due to limited clearance, tire chains are not recom- was originally equipped with your vehicle and should mended. not be operated at sustained speeds over 75 mph (120 km/h). CAUTION! Damage to the vehicle may result if tire chains are used. TIRE ROTATION RECOMMENDATIONS Tires on the front and rear axles of vehicles operate at different loads and perform different steering, driving, and braking functions.
STARTING AND OPERATING 295 desired. The reasons for any rapid or unusual wear TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the should be corrected prior to rotation being performed. driver of a low tire pressure based on the vehicle recomThe suggested rotation method is shown in the following mended cold placard pressure. diagram. The tire pressure will vary with temperature by about 1 psi (7 kPa) for every 12 F (7 C).
296 STARTING AND OPERATING The TPM System will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire. The TPM System will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above the recommended cold placard pressure.
STARTING AND OPERATING CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
298 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will and the TPMS will monitor the actual tire pressure in illuminate in the instrument cluster and a chime the tire. will sound when tire pressure is low in one or Base System more of the four active road tires.
STARTING AND OPERATING will repeat, providing the system fault still exists. The “Tire Pressure Monitoring Telltale Light” will turn off when the fault condition no longer exists. A system fault can occur due to any of the following: 299 NOTE: 1. The compact spare tire (if so equipped) does not have a tire pressure monitoring sensor. Therefore, the TPMS will not monitor the pressure in the compact spare tire. 1. Jamming due to electronic devices or driving next to 2.
300 STARTING AND OPERATING 5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically and the “TPM Telltale Light” will turn OFF, as long no tire pressure is below the low-pressure warning limit in any of the four active road tires. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information.
STARTING AND OPERATING 301 Electronic Vehicle Information Center (EVIC) will display Should this occur, you should stop as soon as possible, a graphic showing the pressure values of each tire with and inflate all tires with low pressure (those flashing in the low tire pressure values flashing. the EVIC graphic) to the vehicle’s recommended cold placard pressure value.
302 STARTING AND OPERATING Check TPMS Warning When a system fault is detected, a chime will sound and the “Tire Pressure Monitoring Telltale Light” will flash on and off for 75 seconds and then remain on solid. In addition, the EVIC will display a ⬙CHECK TPM SYSTEM⬙ message for three seconds and then display dashes (- -) in place of the pressure value to indicate which sensor is not being received. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists.
STARTING AND OPERATING 303 4. For each subsequent ignition key cycle, a chime will sound, the “TPM Telltale Light” will flash on and off for 75 seconds and then remain on solid, and the EVIC will display a ⬙CHECK TPM SYSTEM⬙ message for three seconds and then display dashes (- -) in place of the 2. If you install the compact spare tire in place of a road pressure value. tire that has a pressure below the low-pressure warning limit, upon the next ignition key cycle, the “TPM Telltale 5.
304 STARTING AND OPERATING General Information FUEL REQUIREMENTS This device complies with part 15 of the FCC rules and 2.4L and 2.7L Engine RSS 210 of Industry Canada. Operation is subject to the All engines are designed to meet all emisfollowing conditions: sion regulations and provide excellent fuel • This device may not cause harmful interference.
STARTING AND OPERATING 305 for optimum performance. The use of premium gasoline vehicle. The manufacturer recommends the use of gasois not recommended, as it will not provide any benefit lines that meet the WWFC specifications if they are available. over regular gasoline in these engines. Light spark knock at low engine speeds is not harmful to Reformulated Gasoline your engine.
306 STARTING AND OPERATING winter months to reduce carbon monoxide emissions. manufacturer. While MTBE is an oxygenate made from Fuels blended with these oxygenates may be used in Methanol, it does not have the negative effects of your vehicle. Methanol. CAUTION! For vehicles equipped with a 2.4L or 3.5L engine, DO NOT use gasoline containing Methanol or E85 Ethanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system components.
STARTING AND OPERATING 307 To fix a Non-FFV vehicle inadvertently fueled once with of gasoline may not be indicated on the gasoline pump, therefore, you should ask your gasoline retailer whether E-85 perform the following: or not his/her gasoline contains MMT.
308 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emission control system. • An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat.
STARTING AND OPERATING Carbon Monoxide Warnings 309 WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
310 STARTING AND OPERATING FLEXIBLE FUEL (2.7L ONLY) — IF EQUIPPED E85 General Information The information in this section is for Flexible Fuel vehicles only. These vehicles can be identified by a unique fuel filler door label that states Ethanol (E85) or Unleaded Gasoline Only. This section only covers those subjects that are unique to these vehicles. Please refer to the other sections of this manual for information on features that are common between Flexible Fuel and gasoline-only powered vehicles.
STARTING AND OPERATING 311 WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smoking materials lit in or near the vehicle when removing the fuel filler tube cap (gas cap) or filling the tank. Do not use E85 as a cleaning agent and never use it near an open flame. E85 Badge Fuel Requirements If your vehicle is E85 compatible, it will operate on unleaded gasoline with an octane rating of 87, or E85 fuel, or any mixture of these two fuels.
312 STARTING AND OPERATING When you do switch fuel types it is recommended that: • you do not add less than 5 gal (19 L) when refueling caused by these deposits, a supplemental gasoline additive, such as MOPAR威 Injector Cleanup or Techron may be used.
STARTING AND OPERATING 313 Starting The characteristics of E85 fuel make it unsuitable for use when ambient temperatures fall below 0°F (-18°C). In the range of 0°F (-18°C) to 32°F (0°C), you may experience an increase in the time it takes for your engine to start, and a deterioration in driveability (sags and/or hesitations) until the engine is fully warmed up. Replacement Parts Many components in your Flexible Fuel Vehicle (FFV) are designed to be compatible with ethanol.
314 STARTING AND OPERATING After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door. This keeps the Fuel Filler Cap (Gas Cap) gas cap suspended away from and protects the vehicle’s The gas cap is behind the fuel filler door, on the left rear surface. quarter panel of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle.
STARTING AND OPERATING 315 CAUTION! WARNING! (Continued) • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap may cause the “Malfunction Indicator Light (MIL)” to turn on. • To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. When the fuel nozzle “clicks” or shuts off, the fuel tank is full. • Never add fuel when the engine is running.
316 STARTING AND OPERATING Loose Filler Cap Message If the vehicles diagnostic system determines that the fuel filler cap in loose, improperly installed, or damaged, a “gASCAP” message will be displayed in the instrument cluster. Tighten the gas cap until a “clicking” sound is heard. This is an indication that the gas cap is properly tightened. Press the trip odometer reset button to turn off the message. If the problem persists, the message will appear the next time the vehicle is started.
STARTING AND OPERATING Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR. WARNING! 317 The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation. Weigh it on a commercial scale to insure that it is not over the GVWR.
318 STARTING AND OPERATING the specified GVWR, you must redistribute the weight. Common Towing Definitions Improper weight distribution can have an adverse effect The following trailer towing related definitions will assist on the way your vehicle steers and handles and the way you in understanding the following information: the brakes operate. Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle.
STARTING AND OPERATING 319 Gross Combination Weight Rating (GCWR) Trailer Tongue Weight (TW) The GCWR is the total permissible weight of your vehicle The tongue weight is the downward force exerted on the and trailer when weighed in combination. hitch ball by the trailer. In most cases it should not be less NOTE: The GCWR rating includes a 150 lbs (68 kg) than or more than 10% of the trailer load. You must consider this as part of the load on your vehicle. allowance for the presence of a driver.
320 STARTING AND OPERATING tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Refer to the Trailer Towing Weights (Maximum Trailer Weight Ratings) chart for the Max. GTW towable for your given drivetrain. Trailer Hitch Classification Definitions Class Max.
STARTING AND OPERATING 321 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Maximum Trailer Weight Ratings Max. GTW Max. Trailer Tongue Wt. Engine/Transmission Max. Frontal Area (Gross Trailer Wt.) (See Note 1) 2.4L/Auto See Note 2 Not Recommended Not Recommended 2.7L/Auto See Note 2 1,000 lbs (453 kg) 100 lbs (45 kg) 3.5L/Auto 22 sq.ft. (2.0 sq.
322 STARTING AND OPERATING CAUTION! Towing a trailer with a larger than recommended frontal area could cause the engine to overheat or cause severe engine damage under extreme conditions. Trailer and Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the Tire and Loading Information placard in “Tire Safety Information” in this section for the maximum combined weight of occupants and cargo for your vehicle.
324 STARTING AND OPERATING WARNING! WARNING! (Continued) Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and that it will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have an accident.
STARTING AND OPERATING WARNING! (Continued) 3. GAWR 4. Trailer tongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve 10% of trailer tongue weight as a percentage of total trailer weight). 325 • Check for signs of tire wear or visible tire damage before towing a trailer. Refer to “Tires – General Information” in “Starting and Operating” for information on tread wear indicators and for proper inspection procedure.
326 STARTING AND OPERATING • An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. • Trailer brakes are recommended for trailers over 1,000 lbs (450 kg) and required for trailers in excess of 2,000 lbs (907 kg).
STARTING AND OPERATING 327 If you REGULARLY TOW a trailer for more than 45 minutes of continuous operation, then change the automatic transmission fluid and filter according to the interval specified for “police, taxi, fleet, or frequent trailer towing.” Refer to “Maintenance Schedule” for the proper Make sure all trailer and vehicle lights are working maintenance intervals. properly – including hazard flashers.
328 STARTING AND OPERATING • Use speed control in flat terrain and with light loads to RECREATIONAL TOWING (BEHIND maximize fuel efficiency. MOTORHOME, ETC.) Cooling System Towing This Vehicle Behind Another Vehicle (Flat To reduce potential for engine and transmission over- towing with all four wheels on the ground) heating, take the following actions: • City Driving When stopped for short periods of time, shift the transmission into NEUTRAL and increase engine idle speed. • Highway Driving Reduce speed.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flasher . . . . . . . . . . . . . . . . 330 䡵 Jump-Starting . . . . . . . . . . . . . . . . . . . . . . . . 339 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 330 ▫ Preparations For Jump-Start . . . . . . . . . . . . . 339 ▫ Engine Oil Overheating — 2.4L Engine Only (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . 331 ▫ Jump-Starting Procedure . . . . . . . . . . . . . . . 341 䡵 Jacking And Tire Changing . . . . . . . . . . . .
330 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning • On the highways — Slow down. flasher.
WHAT TO DO IN EMERGENCIES 331 NOTE: There are steps that you can take to slow down Engine Oil Overheating — 2.4L Engine Only (If an impending overheat condition: Equipped) • If your air conditioner (A/C) is on, turn it off. The A/C During sustained high-speed driving or trailer tow up system adds heat to the engine cooling system and long grades on hot day, the engine oil temperature may become too hot. If this happens, the “HOTOIL” message turning the A/C off can help remove this heat.
332 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! (Continued) WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack.
WHAT TO DO IN EMERGENCIES 333 6. Block both the front and rear of the Spare Tire Removal wheel diagonally opposite the jacking Lift up the load floor cover and remove the hold down. position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked. Jack Location The jack and jack-handle are stowed under the load floor in the trunk.
334 WHAT TO DO IN EMERGENCIES Jacking Instructions WARNING! (Continued) WARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly and set an automatic transmission in PARK; a manual transmission in REVERSE.
WHAT TO DO IN EMERGENCIES 335 Jack Warning Label 1. Remove the scissors jack and lug wrench from the spare wheel as an assembly. Turn the jack screw to the left to loosen the lug wrench, and remove the wrench from the jack assembly. NOTE: The Jack Handle attaches to the side of the jack Removing Jack Handle From Jack with two attachment points. When the jack is partially expanded, the tension between the two attachment 2.
336 WHAT TO DO IN EMERGENCIES Jacking Locations
WHAT TO DO IN EMERGENCIES CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 3. 337 head is properly engaged with the lift area closest to the wheel to be changed. Do not raise the vehicle until you are sure the jack is securely engaged. WARNING! 3. There is one front jacking location and one rear jacking location on each side of the vehicle. The front locations are outlined by two triangular cutouts, the rear ones by two rectangular cutouts.
338 WHAT TO DO IN EMERGENCIES toward the wheel. Lightly tighten the nuts. To avoid the tightened the nuts correctly, have them checked with a risk of forcing the vehicle off the jack, do not tighten the torque wrench by your dealer or at a service station. nuts fully until the vehicle has been lowered. 9. Remove the wheel blocks and lower the jack until it is free. Reassemble the lug wrench to the jack assembly and WARNING! stow it in the spare tire area.
WHAT TO DO IN EMERGENCIES JUMP-STARTING If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully. 339 Preparations for Jump-Start The battery in your vehicle is located between the left front headlight assembly and the left front wheel splash shield.
340 WHAT TO DO IN EMERGENCIES WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured. • Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive.
WHAT TO DO IN EMERGENCIES 341 WARNING! 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the discharged vehicle. Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. 2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the booster battery.
342 WHAT TO DO IN EMERGENCIES 5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery. 10. Reinstall the protective cover over the remote positive (+) battery post of the discharged vehicle.
WHAT TO DO IN EMERGENCIES front wheels. Then shift back and forth between REVERSE and FIRST gear. Using minimal accelerator pedal pressure to maintain the rocking motion, without spinning the wheels, is most effective. NOTE: If your vehicle is equipped with Electronic Stability Control (ESC), turn the system to Partial OFF before attempting to “rock” the vehicle. Refer to “Electronic Brake Control” in “Starting and Operating” for further information.
344 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE CAUTION! (Continued) With The Ignition Key Your vehicle may be towed under the following conditions: • The shift lever must be in NEUTRAL. • The distance to be traveled must not exceed 15 miles (25 km). • The towing speed must not exceed 25 mph (40 km/h). CAUTION! • Exceeding these towing limits may cause a transaxle failure.
WHAT TO DO IN EMERGENCIES 345 If you must use the accessories (wipers, defrosters, etc.) while being towed, the key must be in the ON position, not the ACC position. Make certain the transaxle remains in NEUTRAL. Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position. Flat bed towing is the preferred towing method. However, if a flatbed towing vehicle is not available, a wheel lift towing vehicle may be used.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.4L . . . . . . . . . . . . . 349 䡵 Maintenance Procedures . . . . . . . . . . . . . . . . . 355 䡵 Engine Compartment — 2.7L . . . . . . . . . . . . . 350 ▫ Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 356 䡵 Engine Compartment — 3.5L . . . . . . . . . . . . . 351 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . 359 䡵 Onboard Diagnostic System — OBD II . . . . . . 352 ▫ Engine Air Cleaner Filter . . . . . . . . . .
348 MAINTAINING YOUR VEHICLE ▫ Adding Washer Fluid . . . . . . . . . . . . . . . . . 366 䡵 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . 394 ▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . 366 䡵 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 394 ▫ Cooling System . . . . . . . . . . . . . . . . . . . . . 369 ▫ Headlamp . . . . . . . . . . . . . . . . . . . . . . . . . 394 ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 349 ENGINE COMPARTMENT — 2.
350 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 2.
MAINTAINING YOUR VEHICLE 351 ENGINE COMPARTMENT — 3.
352 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as maintaining engine emissions well within current government regulations.
MAINTAINING YOUR VEHICLE the gas cap is properly tightened. Press the trip odometer “Reset” button to turn off the message. If the problem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the “Malfunction Indicator Light (MIL).” Resolving the problem will turn the MIL light off. 353 Normally, the OBD II system will be ready.
354 MAINTAINING YOUR VEHICLE 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a. The MIL will flash for about 10 seconds and then before going to the I/M station. The I/M station can fail return to being fully illuminated until you turn OFF your vehicle because the MIL is on with the engine the ignition or start the engine.
MAINTAINING YOUR VEHICLE 355 your vehicle. Refer to these Service Manuals before Besides those maintenance items specified in the fixed attempting any procedure yourself. maintenance schedule, there are other components which may require servicing or replacement in the future. NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil CAUTION! penalties being assessed against you.
356 MAINTAINING YOUR VEHICLE CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
MAINTAINING YOUR VEHICLE CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” for further information.
358 MAINTAINING YOUR VEHICLE CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New Vehicle Limited Warranty. Engine Oil Viscosity (SAE Grade) – 2.4L and 2.7L Engines SAE 5W-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. Your engine oil filler cap also shows the recommended engine oil viscosity for your vehicle.
MAINTAINING YOUR VEHICLE 359 Lubricants which do not have both the engine oil certi- environment. Contact your authorized dealer, service fication mark and the correct SAE viscosity grade num- station, or governmental agency for advice on how and where used oil and oil filters can be safely discarded in ber should not be used. your area.
360 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter WARNING! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc.) removed.
MAINTAINING YOUR VEHICLE 361 WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
362 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components. Such damage is not covered by the New Vehicle Limited Warranty.
MAINTAINING YOUR VEHICLE Refrigerant Recovery and Recycling R-134a air conditioning refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment. 363 The A/C Air Filter is located in the fresh air inlet behind the glove box.
364 MAINTAINING YOUR VEHICLE 5. Disengage the two retaining tabs that secure the filter 7. Install the A/C Air Filter with the arrow on the filter cover to the HVAC housing and remove the cover. pointing toward the floor. When installing the filter cover, make sure the retaining tabs fully engage the cover. CAUTION! The A/C Air Filter is labeled with an arrow to indicate airflow direction through the filter. Failure to install the filter properly will result in the need to replace it more often. 8.
MAINTAINING YOUR VEHICLE 365 concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades.
366 MAINTAINING YOUR VEHICLE Adding Washer Fluid The fluid reservoir for the windshield washers is located in the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water. WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you.
MAINTAINING YOUR VEHICLE 367 WARNING! CAUTION! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, refer to “Safety Tips/Exhaust Gas” in “Things To Know Before Starting Your Vehicle” for further information. • A hot exhaust system can start a fire if you park over materials that can burn.
368 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter damverter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage. motion.
MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the LOCK position. The fan is temperature controlled and can start at anytime the ignition switch is in the ON position. • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool.
370 MAINTAINING YOUR VEHICLE Selection Of Coolant Use only the manufacturer’s recommended coolant. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. CAUTION! • Mixing of engine coolant (antifreeze) other than specified HOAT engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection.
MAINTAINING YOUR VEHICLE replacement. To prevent reducing this extended maintenance period, it is important that you use the same engine coolant (antifreeze) throughout the life of your vehicle. 371 (antifreeze) solution. The use of lower quality water will reduce the amount of corrosion protection in the engine cooling system.
372 MAINTAINING YOUR VEHICLE WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To prevent scalding or injury, do not remove the pressure cap while the system is hot or under pressure. • Do not use a pressure cap other than the one specified for your vehicle.
MAINTAINING YOUR VEHICLE The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for engine coolant (antifreeze) freeze point or replacing coolant. Advise your service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill.
374 MAINTAINING YOUR VEHICLE • Make sure that the radiator and coolant recovery bottle overflow hoses are not kinked or obstructed. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean. WARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage.
MAINTAINING YOUR VEHICLE Clean the top of the master cylinder area before removing the cap. If necessary, add fluid to bring the fluid level up to the requirements described on the brake fluid reservoir. Overfilling of fluid is not recommended because it may cause leaking in the system. Fluid level can be expected to fall as the brake pads wear. Brake fluid level should be checked when pads are replaced. However, low fluid level may be caused by a leak and a checkup may be needed.
376 MAINTAINING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point. This may cause it to boil unexpectedly during hard or prolonged braking, resulting in sudden brake failure. This could result in a accident.
MAINTAINING YOUR VEHICLE 377 driven at least 15 miles (24 km). Hot fluid cannot be held Fluid Level Check – 2.4L and 2.7L Engines Use the following procedure to check the automatic comfortably between the fingertips. Cold fluid is at a transmission fluid level properly: temperature below 80°F (27° C). 1. Park the vehicle on level ground. 2. Run the engine at curb idle speed for a minimum of 60 seconds. 3. Apply the parking brake fully. 4.
378 MAINTAINING YOUR VEHICLE CAUTION! • Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will result in more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. • Dirt and water in the transmission can cause serious damage.
MAINTAINING YOUR VEHICLE CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission components. Such damage is not covered by the New Vehicle Limited Warranty. 379 The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. What Causes Corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle.
380 MAINTAINING YOUR VEHICLE Washing • Wash your vehicle regularly. Always wash your vehicle in the shade using MOPAR威 Car Wash or equivalent, or a mild car wash soap, and rinse the panels completely with clear water. • If insects, tar, or other similar deposits have accumulated on your vehicle, use MOPAR威 Super Kleen Bug and Tar Remover or equivalent to remove.
MAINTAINING YOUR VEHICLE 381 • If you detect any stone chips or scratches in the paint, Wheel and Wheel Trim Care touch them up immediately. The cost of such repairs is All wheels and wheel trim, especially aluminum and chrome-plated wheels, should be cleaned regularly with considered the responsibility of the owner. a mild soap and water to prevent corrosion.
382 MAINTAINING YOUR VEHICLE To minimize the possibility of scratching the lenses and • For grease stains, apply MOPAR威 Multi-Purpose reducing light output, avoid wiping with a dry cloth. To Cleaner or equivalent to a clean, damp cloth and remove road dirt, wash with a mild soap solution folremove the stain. Use a fresh, damp towel to remove lowed by rinsing. soap residue.
MAINTAINING YOUR VEHICLE if absolutely necessary. Do not use harsh cleaners or Armor All威. Use MOPAR威 Total Clean or equivalent to clean vinyl upholstery. Cleaning Leather Upholstery MOPAR威 Total Clean or equivalent is specifically recommended for leather upholstery. Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth.
384 MAINTAINING YOUR VEHICLE Replace the belts if they appear frayed or worn or if the Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are buckles do not work properly. molded in clear plastic. When cleaning the lenses, care Dry with a soft tissue. must be taken to avoid scratching the plastic. Cleaning Center Console Cupholders 1. Clean with a wet, soft rag.
MAINTAINING YOUR VEHICLE Installation Align the liner in the cupholder and press down firmly. Convertible Top Care CAUTION! Failure to follow these cautions may cause interior water damage, stains or mildew on the top material: • Avoid high-pressure car washes, as they can damage the top material. Also, increased water pressure may force past the weather strips. • Remove any standing water from the top and dry the surface before opening it.
386 MAINTAINING YOUR VEHICLE Washing Hand washing is highly recommended. Automatic car washing equipment can damage the top material. If you must use an automatic car wash, soft cloth systems are preferred. CAUTION! Avoid high-pressure car washes, as they can damage the top material. Also, increased water pressure may force water past the weather strips. General Cleaning Careful vacuuming of the top before washing is helpful in removing dust and other foreign particles.
MAINTAINING YOUR VEHICLE Additional Cleaning Procedure For additional cleaning assistance in removing stubborn stains, apply MOPAR威 Convertible Cloth Top Cleaner or equivalent to the complete stain, extending 2 inches (50 mm) beyond the stain. With a soft bristle brush, scrub in all directions over the stain. Avoid heavy scrubbing. Rinse the area with warm water. If the stain is still apparent, repeat the cleaning procedure. When the stain is no longer showing, rinse the complete top with warm water.
388 MAINTAINING YOUR VEHICLE FUSES Totally Integrated Power Module (TIPM) The TIPM is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini fuses. A label that identifies each component may be printed on the inside of the cover. Refer to the graphic below for FUSES/TIPM location.
MAINTAINING YOUR VEHICLE Cavity 1 2 Cartridge Fuse 40 Amp Green — 3 — 4 — 5 — 6 — Mini Fuse Description — Power Top Module – If Equipped 7 — 20 Amp Yellow AWD Module 8 — 9 40 Amp Green 10 — 11 — 12 — 10 Amp Red 10 Amp Red 20 Amp Yellow 10 Amp Red Battery Feed – Center High Mounted Stop Light (CHMSL)/ Brake Switch Battery Feed – Ignition Switch Trailer Tow – If Equipped Ignition Off Draw (IOD) – Power Mirror Switch/ Climate Controls Cavity Cartridge Fuse Mini Fuse 30 Amp Gree
390 MAINTAINING YOUR VEHICLE Cavity 13 Cartridge Fuse — Mini Fuse 20 Amp Yellow 14 — 10 Amp Red 15 40 Amp Green — 16 — 15 Amp Lt. Blue Description Cavity Cartridge Fuse Mini Fuse — Ignition Off Draw (IOD) – Cabin Compartment Node (CCN)/ Interior Lighting Battery Feed – Radiator Fan Relay IGN Run/ACC – Cigar Lighter/ PWR Sunroof Mod 17 — 10 Amp Red 18 40 Amp Green — 19 — 20 Amp Yellow 20 — 21 — 15 Amp Lt.
MAINTAINING YOUR VEHICLE Cavity 22 Cartridge Fuse Mini Fuse — 10 Amp Red 23 — 15 Amp Lt. Blue 24 — 25 Amp Natural 25 — 10 Amp Red 26 — 15 Amp Lt.
392 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini Fuse 10 Amp Red 31 — 32 30 Amp Pink — 33 — 10 Amp Red Description Cavity Cartridge Fuse Mini Fuse — Auto Shutdown (ASD) Relay Feed 1 Battery Feed – Switch Bank/ Diagnostic Link Connector/ Powertrain Control Module (PCM) 34 30 Amp Pink — 35 40 Amp Green — Description Battery Feed – Anti-Lock Brakes (ABS) Module – If Equipped/ Electronic Stability Control (ESC) Module – If Equipped Battery Feed – Anti-Lock Brakes (ABS) Module – If
MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini Fuse 36 30 Amp Pink — 37 — 25 Amp Natural Description Battery Feed – Passenger Door Module (PDM)/ Driver Door Module (DDM) Power Top Module – If Equipped CAUTION! • When installing the Totally Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Totally Integrated Power Module, and possibly result in an electrical system failure.
394 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS All the inside bulbs are brass or glass wedge base. Aluminum base bulbs are not approved and should not be used for replacement. Center High Mounted Stop Lamp (CHMSL) . . . . . . . . . . . . . . . . . . . . . . . . W16W (921) Rear Tail/Stop Lamp . . . . . . . . . . . . . . . . . . . . . 3057 Rear Turn Signal Lamp. . . . . . . . . . . . . . . . . . . . 3057 Backup Lamp . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 395 2. Reach into engine compartment and from behind the 3. Rotate bulb and connector one-quarter turn and pull lamp assembly and grasp the connector. outward from assembly. 7 CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life.
396 MAINTAINING YOUR VEHICLE 4. Pull the bulb out of the socket and replace the bulb. Front Turn Signal/Parking Lamp 1. Raise and prop open the hood. 2. Rotate the bulb’s electrical connector one-quarter turn counterclockwise and remove it from the headlamp housing. 5. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 6. Reinsert the bulb and socket assembly and rotate clockwise one-quarter turn to secure.
MAINTAINING YOUR VEHICLE 397 3. Remove the bulb from the connector socket and install the replacement bulb. 4. Install the bulb and connector assembly into the headlamp housing and rotate the connector one-quarter turn clockwise to lock it in place. Front Fog Lamp NOTE: Access to the lamps through the lower fascia cutout is limited. We recommend you access the lamps by turning the steering wheel to allow access and remove the inner fender shield. 1.
398 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 3. Install the bulb and connector assembly into the fog lamp housing and rotate the connector one-quarter turn clockwise to lock it in place. Tail/Stop, Rear Turn Signal and Backup Lamps The taillamps are a two piece design.
MAINTAINING YOUR VEHICLE 399 Changing the Tail/Stop Lamp or Rear Turn Signal Lamp 1. Open the trunk and gently pull back the trunk liner behind the taillamp 3. Grasp the taillamp housing and pull it firmly outward while pushing gently on the studs from inside to disengage the housing from the vehicle. 2. Remove the two plastic wing nuts from the taillamp housing.
400 MAINTAINING YOUR VEHICLE 4. Rotate the applicable bulb’s electrical connector one- 5. Remove the bulb from the connector socket and install quarter turn counterclockwise and remove it from the the replacement bulb. taillamp housing. 6. Install the bulb and connector assembly into the taillamp housing and rotate the connector one-quarter turn clockwise to lock it in place. 7. Reinstall the taillamp housing. Changing the Backup Lamp 1. Open the trunk. 2.
MAINTAINING YOUR VEHICLE 401 License Plate Lamp 1. Remove two retaining screws holding the lamp lens in place. 1 — Rear Fog Lamp 2 — Backup Lamp 3. Remove the bulb from the connector socket and install the replacement bulb. 4. Install the bulb and connector assembly into the 2. Gently pry the lens loose. housing and rotate the connector one-quarter turn clock- 3. Pull bulb from socket, replace and reattach the lamp wise to lock it in place. lens with the two retaining screws.
402 MAINTAINING YOUR VEHICLE Center High-Mounted Stop Lamp (CHMSL) 1. Open the trunk lid. 3. Remove the bulb from the connector socket and install the replacement bulb. 4. Install the bulb and connector assembly into the 2. Rotate the bulb’s electrical connector one-quarter turn CHMSL housing and rotate the connector one-quarter counterclockwise and remove it from the CHMSL housturn clockwise to lock it in place. ing.
MAINTAINING YOUR VEHICLE 403 FLUID CAPACITIES U.S. Fuel (Approximate) All Engines 16.9 Gallons Engine Oil with Filter 2.4L Engine (SAE 5W-20, API Certified) 4.5 Quarts 2.7L Engine (SAE 5W-20, API Certified) 5.5 Quarts 3.5L Engine (SAE 10W-30, API Certified) 5.5 Quarts Cooling System* 2.4L Engine (MOPAR威 Antifreeze/Coolant 5 7.7 Quarts Year/100,000 Mile Formula or equivalent) 2.7L Engine (MOPAR威 Antifreeze/Coolant 5 9.8 Quarts Year/100,000 Mile Formula or equivalent) 3.
404 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil – 2.4L and 2.7L Engines Engine Oil – 3.5L Engine Engine Oil Filter Spark Plugs – 2.4L Engine except PZEV* Spark Plugs – 2.4L Engine with PZEV* Spark Plugs – 2.7L Engine Spark Plugs – 3.5L Engine Fuel Selection – 2.4L and 2.7L Engines Fuel Selection – 3.
MAINTAINING YOUR VEHICLE 405 Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. MOPAR威 DOT 3 and SAE J1703 should be used. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. MOPAR威 Power Steering Fluid +4, MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product.
M A I N T E N A N C ▫ Required Maintenance Intervals . . . . . . . . . . 410 E MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance . . . . . . 408 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . .
M A I N T E N A N C E 408 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions control system. These and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
MAINTENANCE SCHEDULES NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been 6 months since your last oil change even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or six months, whichever comes first.
M A I N T E N A N C E 410 MAINTENANCE SCHEDULES Once a Month • Check tire pressure and look for unusual wear or damage. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle. • Inspect the battery and clean and tighten the terminals as required. Required Maintenance Intervals Refer to the Maintenance Schedules on the following • Check the fluid levels of coolant reservoir, brake pages for the required maintenance intervals.
MAINTENANCE SCHEDULES 6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Signature Authorized Chrysler Dealer Date Dealer Code 411 M 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary.
M 412 MAINTENANCE SCHEDULES A I 18,000 Miles (30,000 km) or N T 18 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Inspect the brake linings, and replace as necessary.
MAINTENANCE SCHEDULES 30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule 36,000 Miles (60,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Replace the spark plugs (2.4L Engine except PZEV*). ❏ Adjust parking brake on vehicles equipped with four wheel disc brakes.
M 414 MAINTENANCE SCHEDULES A I 42,000 Miles (70,000 km) or N T 42 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Inspect the brake linings, and replace as necessary.
MAINTENANCE SCHEDULES 54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule 60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate tires. Replace the engine air cleaner filter. Replace the spark plugs (2.4L Engine except PZEV*). Inspect the brake linings, and replace as necessary. Replace the air conditioning filter (if equipped).
M 416 MAINTENANCE SCHEDULES A I 66,000 Miles (110,000 km) or N T 66 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Inspect the brake linings, and replace as necessary.
MAINTENANCE SCHEDULES 78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Inspect the brake linings, and replace as necessary. ❏ Replace the air conditioning filter (if equipped).
M 418 MAINTENANCE SCHEDULES A I 90,000 Miles (150,000 km) or N T 90 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C ❏ Replace the engine air cleaner filter. E S C H E D U L E S 8 96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Replace the spark plugs (2.4L Engine except PZEV*). ❏ Inspect and replace the PCV valve, if necessary†. ❏ Adjust parking brake on vehicles equipped with four wheel disc brakes.
MAINTENANCE SCHEDULES 102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the spark plugs (2.4L PZEV*, 2.7L and 3.5L Engines). ❏ Replace the timing belt (3.5L Engine). ❏ Flush and replace the engine coolant. ❏ Inspect accessory drive belt, replace if necessary.
M 420 MAINTENANCE SCHEDULES A I 114,000 Miles (190,000 km) or N T 114 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E S C H E D U L E S 8 Odometer Reading Repair Order # Signature Authorized Chrysler Dealer Date Dealer Code 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate tires. Replace the engine air cleaner filter. Replace the spark plugs (2.
MAINTENANCE SCHEDULES 126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Signature Authorized Chrysler Dealer Date Dealer Code 421 M 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary.
M 422 MAINTENANCE SCHEDULES A I 138,000 Miles (230,000 km) or N T 138 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E S C H E D U L E S 8 Odometer Reading Repair Order # Signature Authorized Chrysler Dealer Date Dealer Code 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
MAINTENANCE SCHEDULES 150,000 Miles (250,000 km) or 150 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Replace the spark plugs (2.4L Engine except PZEV*). ❏ Adjust parking brake on vehicles equipped with four wheel disc brakes.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . 429 ▫ Prepare For The Appointment . . . . . . . . . . . 427 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . 429 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 427 䡵 Warranty Information . . . . . . . . . . . . . . . . . .
426 IF YOU NEED CONSUMER ASSISTANCE 䡵 Publication Order Forms . . . . . . . . . . . . . . . . 431 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . 433 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 433 ▫ Temperature Grades . . . . . . . . . . . . . . . . . . 434 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 427 the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the for an appointment. right papers with you. Take your warranty folder. All work to be performed may not be covered by the IF YOU NEED ASSISTANCE warranty.
428 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized • Vehicle delivery date and mileage dealer’s service manager first. Most matters can be reChrysler Group LLC Customer Center solved with this process. P.O. Box 21–8004 • If for some reason you are still not satisfied, talk to the Auburn Hills, MI 48321–8004 general manager or owner of the authorized dealer- Phone: (800) 247–9753 ship. They want to know if you need assistance. Chrysler Canada Inc.
IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
430 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
IF YOU NEED CONSUMER ASSISTANCE If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. 431 Transport Canada, Motor Vehicle Defect Investigations and Recalls, 2780 Sheffield Road, Ottawa, Ontario K1B 3V9.
432 IF YOU NEED CONSUMER ASSISTANCE vehicle, system, and/or components is written in • Owner’s Manuals straightforward language with illustrations, diagrams, These Owner’s Manuals have been prepared with the and charts. assistance of service and engineering specialists to • Diagnostic Procedure Manuals acquaint you with specific Chrysler Group LLC vehicles.
IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle. 433 significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
434 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
436 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . . . . 264 ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . 267 Accessory Delay, Power . . . . . . . . . . . . . . . . . . . . 12 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 370 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 366 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 437 Body Mechanism Lubrication . . . . . . . . . . . . . . . 364 B-Pillar Location . . . . . . . . . . . . . . . . . . . . . . . . 282 Brake Assist System . . . . . . . . . . . . . . . . . . . . . . 270 Brake, Parking . . . . . . . . . . . . . . . . . . . . . . . . . . 264 Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 Anti-Lock (ABS) . . . . . . . . . . . . . . . . . . . . . . . 267 Fluid Check . . . . . . . . . . . . . . . . . . . . . . . 374,405 Master Cylinder . . . . . .
438 INDEX Caps, Filler Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 Oil (Engine) . . . . . . . . . . . . . . . . . . 349,350,351,358 Power Steering . . . . . . . . . . . . . . . . . . . . . . . . 264 Radiator (Coolant Pressure) . . . . . . . . . . . . . . . 371 Car Washes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 Carbon Monoxide Warning . . . . . . . . . . . . . . . 78,309 Cargo (Vehicle Loading) . . . . . . . . . . . . . . . . . . . 316 Cellular Phone . . . . .
INDEX Coolant Pressure Cap (Radiator Cap) . . . . . . . . . . 371 Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . 369 Adding Coolant (Antifreeze) . . . . . . . . . . . . . . 370 Coolant Capacity . . . . . . . . . . . . . . . . . . . . . . 403 Coolant Level . . . . . . . . . . . . . . . . . . . . . . 369,372 Disposal of Used Coolant . . . . . . . . . . . . . . . . 372 Drain, Flush, and Refill . . . . . . . . . . . . . . . . . . 369 Inspection . . . . . . . . . . . . . . . . . . . . . . . .
440 INDEX Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344 . . . . . . . . 138 . . . . . . . . 117 Emergency Trunk Release . . . . . . . . . . . . . . . . . . . 37 Emission Control System Maintenance . . . . . . 353,408 . . . . . . . . 260 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . 349,350,351 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . 360 Block Heater . . . . . . . . . . . . . . . . . . . . . . . . . 250 . . . . . . . .
INDEX 441 Air Conditioning . . . . . . . . . . . . . . . . . . . . 241,363 Automatic Transaxle . . . . . . . . . . . . . . . . . . . . 378 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . 359,404 Engine Oil Disposal . . . . . . . . . . . . . . . . . . . . 359 Flashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 Hazard Warning . . . . . . . . . . . . . . . . . . . . . . . 330 Turn Signal . . . . . . . . . . . . . . . . . . . . . . . . 81,128 Flash-To-Pass . . . . . . . . . . .
442 INDEX Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . . . . 403 Fluid Leaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Fluid Level Checks Automatic Transaxle . . . . . . . . . . . . . . . . . 377,378 Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374,405 Cooling System . . . . . . . . . . . . . . . . . . . . . . . 369 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 Power Steering . . . . . . . . . . . . . . . . . . . . .
INDEX 443 Head Restraints . . . . . . . . . . . . . . . . . . . . . . . . . 118 Gauges Coolant Temperature . . . . . . . . . . . . . . . . . . . 158 Headlights . . . . . . . . . . . . . . . . . . . . . . . 123,124,394 Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . 394 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Cleaning . . . . . .
444 INDEX Hitches Trailer Towing . . . . . . . . . . . . . . . . . . . . . Holder, Cup . . . . . . . . . . . . . . . . . . . . . . . . HomeLink威 (Garage Door Opener) Transmitter Hood Prop . . . . . . . . . . . . . . . . . . . . . . . . . Hood Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319 148 138 122 121 Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Lock . . . .
INDEX Lane Change and Turn Signals . . . . . . . . . . . 128,166 Lane Change Assist . . . . . . . . . . . . . . . . . . . . . . 128 Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . 39 LATCH (Lower Anchors and Tether for CHildren) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70,72 Latch Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Hood . . . . . . . . . . . . . . . . . . . . . . . . .
446 INDEX Lights On Reminder . . . . . . . . . . . . . . . . . . . . 124 Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 Malfunction Indicator (Check Engine) . . . . . . . . 170 Map Reading . . . . . . . . . . . . . . . . . . . . . . . . . 129 Oil Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123,124 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Rear Tail . . . . . . . . . . . . . .
INDEX 447 Occupant Restraints . . . . . . . . . . . . . . . . . . . 37,58,61 Occupant Restraints (Sedan) . . . . . . . . . . . . . . . 55,58 Octane Rating, Gasoline (Fuel) . . . . . . . . . . . . . . 304 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162,165 Oil Change Indicator . . . . . . . . . . . . . . . . 164,174,408 Oil Change Indicator, Reset . . . . . . . . . . . . . . 164,174 Oil, Engine . . . . . . . . . . . .
448 INDEX Viscosity . . . . . . . . . . . . . . . . . . . . . . . . . 358,403 Oil Filter, Change . . . . . . . . . . . . . . . . . . . . . . . . 359 Oil Filter, Selection . . . . . . . . . . . . . . . . . . . . . . . 359 Oil Pressure Light . . . . . . . . . . . . . . . . . . . . . . . 160 Onboard Diagnostic System . . . . . . . . . . . . . . 352,353 Opener, Garage Door (HomeLink威) . . . . . . . . . . . 138 Operator Manual (Owner’s Manual) . . . . . . . . . . . . 4 Outside Rearview Mirrors . . . . . . . .
INDEX Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . . . . . 289 Radiator Cap (Coolant Pressure Cap) . . . . . . . . . . 371 Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . 230 Radio Remote Controls . . . . . . . . . . . . . . . . . . . . 228 Radio, Satellite (Uconnect威 studios) . . . . . . . . . . . 223 Rear Cupholder . . . . . . . . . . . . . . . . . . . . . . . . . 148 Rear Window Defroster . . . . . . . . . . . . . . . . . . . 151 Rear Window Features . . . . . . . . . . . .
450 INDEX Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Satellite Radio Antenna . . . . . . . . . . . . . . . . . . . 224 Satellite Radio (Uconnect威 studios) . . . . . . . . . . . 223 Schedule, Maintenance . . . . . . . . . . . . . . . . . . . . 408 Seat Belt Maintenance . . . . . . . . . . . . . . . . . . . . 384 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . . . 50 Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . 37,39,79 And Pregnant Women . . . .
INDEX Shifting Automatic Transaxle . . . . . . . . . . . . . . . . . . . . 250 Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Side Airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Side View Mirror Adjustment . . . . . . . . . . . . . . . 110 Side Window Demisters (Defrosters) . . . . . . . . . . 241 Signals, Turn . . . . . . . . . . . . . . . . . . . . . . 81,128,398 Slippery Surfaces, Driving On . . . . . . . . . . . . . . . 260 Snow Chains (Tire Chains) . . . .
452 INDEX Inflation Pressures . . . . . . . . . . . . . . . . . . . . . 287 Temperature Gauge, Engine Coolant . . . . . . . 158,330 Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 Tether Anchor, Child Restraint . . . . . . . . . . . . . . . 70 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 292 Theft Alarm (Security Alarm) . . . . . . . . . . . . . . . . 18 Load Capacity . . . . . . . . . . . . . . . . . . . . . 282,283 Theft System (Security Alarm) . . . . . . . .
INDEX 453 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318 Overdrive . . . . . . . . . . . . . . . . . . . . . . . . . . . 255 Disabled Vehicle . . . . . . . . . . . . . . . . . . . . . . . 344 Selection of Lubricant . . . . . . . . . . . . . . . . . . . 405 Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321 Recreational . . . . . . . . . . . . . . . . . . . . . . . . . . 328 Transmission . . . .
454 INDEX Uconnect™ (Hands-Free Phone) . . . . . . . . . . . . . 112 Understanding Your Instrument Panel . . . . . . . . . 156 Uniform Tire Quality Grades . . . . . . . . . . . . . . . . 433 Universal Transmitter . . . . . . . . . . . . . . . . . . . . . 138 Unleaded Gasoline . . . . . . . . . . . . . . . . . . . . . . . 304 Untwisting Procedure, Seat Belt . . . . . . . . . . . . . . 44 Upholstery Care . . . . . . . . . . . . . . . . . . . . . . . . 382 Vanity Mirrors . . . . . . . . . . . . . . . . . . .
INDEX 455 Windshield Wiper Blades . . . . . . . . . . . . . . . . . . 365 Wiper Blade Replacement . . . . . . . . . . . . . . . . . . 365 Windshield Wipers . . . . . . . . . . . . . . . . . . . . . . . 130 Wiper, Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Windstop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Wipers, Intermittent . . . . . . . . . . . . . . . . . . . . . . 131 Folding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chrysler Group LLC 10C27-126-AC 3rd Edition Printed in U.S.A.
