Uconnect 8.4A/8.4AN ® 15UC84A-526-AC Third Edition Uconnect® 8.4A/8.
SECTION TABLE OF CONTENTS PAGE 1 IDENTIFYING YOUR RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 ALL ABOUT UCONNECT® ACCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 3 UCONNECT® 8.4A — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 3 4 UCONNECT® 8.4AN — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . . .
IDENTIFYING YOUR RADIO CONTENTS ! IDENTIFYING YOUR RADIO . . . . . . . . . . . . . . . .4 ▫ Key Features . . . . . . . . . . . . . . . . . . . . . . . . . .
4 IDENTIFYING YOUR RADIO IDENTIFYING YOUR RADIO Key Features Uconnect® 8.4A/8.4AN The 8.4A and 8.4AN share some features between them, but the 8.4AN has some features that sets it apart. The below features are shared between them: • 8.4” Touchscreen • Hands-free/Bluetooth® • USB port, AUX port and SD Card slot — If Equipped • Touchscreen Climate Controls • SiriusXM Satellite Radio with 1yr Trial Included — If Equipped • Uconnect® Access — U.S.
IDENTIFYING YOUR RADIO 5 The 8.4AN sets itself apart by offering these unique NOTE: 3D Landmarks are visible at 250ft and below, 3D features: City Models are visible at 50ft and below and Digital Terrain is visible at 100mi and below. • HD Radio — U.S. Market Only • Navigation Standard • One-shot destination entry • 3D content (Select this option and zoom to an appropriate level.
ALL ABOUT Uconnect® ACCESS 2 CONTENTS ! INTRODUCTION TO Uconnect® ACCESS . . . . . .9 ▫ What Is Uconnect® Access? . . . . . . . . . . . . . . . .9 ▫ Included Trial Period For New Vehicles . . . . . . .13 ▫ Features And Packages . . . . . . . . . . . . . . . . . .15 ! GETTING STARTED WITH Uconnect® ACCESS . .15 ▫ Registration . . . . . . . . . . . . . . . . . . . . . . . . . .15 ▫ Set Up Your Uconnect® Payment Account . . . . .23 ▫ Download the Uconnect® Access App . . . . . . .26 ▫ Set up Via Mobile . . .
8 ALL ABOUT Uconnect® ACCESS ▫ WiFi Hotspot . . . . . . . . . . . . . . . . . . . . . . . . .72 ▫ SRT Performance Pages/SRT Performance Pages Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 ▫ Voice Texting . . . . . . . . . . . . . . . . . . . . . . . . .93 ▫ Remote Door Lock/Unlock. . . . . . . . . . . . . . .103 ▫ Remote Vehicle Start . . . . . . . . . . . . . . . . . . .108 ▫ Remote Horn And Lights . . . . . . . . . . . . . . . .114 ▫ Via Mobile Apps . . . . . . . . . . . . . . .
ALL ABOUT Uconnect® ACCESS 9 INTRODUCTION TO Uconnect® ACCESS Uconnect® Access provides: To unlock the full potential of Uconnect® Access in your • The ability to remotely lock/unlock your doors and vehicle, you first need to register with Uconnect® Access. start your vehicle (if equipped) from virtually anywhere, with the Uconnect® Access App, the Mopar What Is Uconnect® Access? Owner Connect website (moparownerconnect.com) Uconnect® Access enhances your ownership and driving and Uconnect® Care.
10 ALL ABOUT Uconnect® ACCESS 1. The ASSIST And 9-1-1 Buttons On Your Rearview Mirror The ASSIST Button is used for contacting Roadside Assistance, Vehicle Care and Uconnect® Care. The 9-1-1 button connects you directly to emergency services. 2. The Uconnect® “Apps” Button On The Menu Bar At The Bottom Right Corner Of The In-Vehicle Touchscreen This is where you can begin registration for Uconnect® Access, find the apps and purchase WiFi Hotspot on demand. 1 — Voice Recognition Button 3.
ALL ABOUT Uconnect® ACCESS 11 WARNING! ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume all risks related to the use of the Uconnect® features and applications in this vehicle. Only use Uconnect® when it is safe to do so. Failure to do so may result in an accident involving serious injury or death.
12 ALL ABOUT Uconnect® ACCESS 1 — Steering Wheel Audio Controls (Left Rear Surface of Steering Wheel) 2 — Uconnect® Voice Command Button 3 — Uconnect® Phone Button 4 — Assist Button 5 — 9-1-1 Button 6 — Uconnect® Access 8.
ALL ABOUT Uconnect® ACCESS 13 Included Trial Period For New Vehicles Your new vehicle may come with an included trial period for use of the Uconnect® Access Services starting at the date of vehicle purchase*. To activate the trial, you must first register with Uconnect® Access. Once registered, Uconnect® Access customers can purchase additional services and Apps over the lifetime of their vehicle ownership. Radio Radio Sales Code Trial Period Included Trial on New Vehicles ONLY Uconnect® 8.4A Uconnect® 8.
14 ALL ABOUT Uconnect® ACCESS There are a few quick ways for you to identify your radio. For a more complete description, please refer to the User Guide in your glove box or visit DriveUconnect.com. • Both the Uconnect® 8.4A and Uconnect® 8.4AN feature a large 8.4 inch full color touchscreen. • Only the Uconnect® 8.4AN will have the HD Radio icon when listening to FM or AM stations. The icon will be lit when it is receiving an HD Radio signal (not all stations currently broadcast an HD Radio signal).
ALL ABOUT Uconnect® ACCESS 15 Features And Packages NOTE: Should you require assistance anytime during the registration process, call Uconnect® Care at After the trial period, you can subscribe to continue your 1-855-792-4241. service by visiting the Uconnect® Store located within the Mopar Owner Connect website (moparownerconnect.com). If you need assistance, you can also call Uconnect® Care at 855-792-4241. For the latest information on packages and pricing information, visit DriveUconnect.com.
16 ALL ABOUT Uconnect® ACCESS 2. Press “Register” on the reminder screen or select the 3. The Uconnect® Access Registration App will open “Uconnect® Registration” button on the touchscreen and display step-by-step instructions to start your which appears in the “Favorites Tab” on the Apps list. registration.
ALL ABOUT Uconnect® ACCESS 17 4. Enter your email address into the radio touchscreen. 1 — Press To Enter Email Address 2 — Press To Re-enter Email Address 3 — Press To Send 5. This message will display on the touchscreen indicating your email submission was accepted. In a few minutes, you will receive an email which will allow you to register your vehicle for Uconnect® Access. You should open this email and begin your Uconnect® Access registration within 72 hours.
18 ALL ABOUT Uconnect® ACCESS 6. Check for an email from Uconnect® Access that contains your personalized registration link. If you don’t see it, check your spam or junk mail folder. Open the email and click on the link to continue registering. NOTE: For security reasons, this link is valid for 72 hours from the time you submitted your email address into the radio touchscreen.
ALL ABOUT Uconnect® ACCESS 19 2
20 ALL ABOUT Uconnect® ACCESS For additional registration assistance while in the vehicle, turn the ignition on and push the ASSIST button to contact Uconnect® Care. 7. To unlock the full potential of Uconnect® Access in your vehicle, you will need to create or validate an existing Mopar Owner Connect account (previously Owner Center).
ALL ABOUT Uconnect® ACCESS 21 2
22 ALL ABOUT Uconnect® ACCESS 8. Once you are logged in to your Mopar Owner Connect account, you will create a personal Uconnect® Security PIN. The Uconnect Security PIN will be required to authenticate you when accessing your account via Uconnect® Care or performing any remote services such as Remote Door Lock/Unlock, Remote Horn & Lights, or Remote Vehicle Start. 9. If your vehicle qualifies for a trial package it will be presented.
ALL ABOUT Uconnect® ACCESS 23 • Set up your Uconnect® Payment Account (provides the option to purchase WiFi Hotspot and renew your subscription). • Set up your Via Mobile profile on Mopar Owner Connect website (if equipped). Set Up Your Uconnect® Payment Account Setting up your Uconnect® Payment Account allows you to make purchases from your vehicle (such as WiFi Hotspot) and can be used to ensure uninterrupted service at the end of the included trial period.
24 ALL ABOUT Uconnect® ACCESS Setting up AFTER registration and Managing your Uconnect® Payment Account If you didn’t set up your Uconnect® Payment Account when you registered, or you want to make changes later on, just go to moparownerconnect.com to manage your account. 1. Log In to Mopar Owner Connect with your username/email and password. 2. In the upper-right corner of the screen, click on the “Edit Profile” button. 3.
ALL ABOUT Uconnect® ACCESS 25 • Reviewing your current subscriptions to packages and Apps • Changing your Uconnect® Payment PIN, or your Security Question • Viewing transaction history of purchases from the Uconnect® Store 2
26 ALL ABOUT Uconnect® ACCESS Download the Uconnect® Access App The Uconnect® Access smartphone app allows you to remotely lock or unlock your doors, start your engine (if equipped) and activate your horn and lights from virtually anywhere. The smartphone app also features Via Mobile (if equipped) which uses your smartphone’s data plan to access your personal Pandora®, iHeartRadio, Slacker Radio and Aha™ accounts and control them using your vehicle touchscreen.
ALL ABOUT Uconnect® ACCESS 27 2 Once you’ve confirmed your smartphone is compatible, The Uconnect® Access app is only compatible with select Android and iPhone® users should visit their respective iPhone® and Android smartphones. Visit app store and search for “Uconnect® Access”. UconnectPhone.com to confirm that your smartphone is compatible with Uconnect®.
28 ALL ABOUT Uconnect® ACCESS • Use Via Mobile to access your personal Pandora®, iHeartRadio, Slacker Radio and Aha™ from the veUnlike your key fob, the Uconnect® Access app on your hicle and control them using your vehicle touchscreen smartphone can send commands to your vehicle from any distance so long as your phone and vehicle are both in cellular range. The Uconnect® Security PIN that was set up during registration is required for remote services.
ALL ABOUT Uconnect® ACCESS 29 2
30 ALL ABOUT Uconnect® ACCESS To download the app to your smartphone, go to your • Your smartphone must be compatible with the respective app store and search for “Uconnect® Access” Uconnect® Access App (there is no charge to download and install the app to • Vehicle must be in range of a usable and authorized your smartphone).
ALL ABOUT Uconnect® ACCESS 31 FAQs 1. How much does the Uconnect® Access App cost? Uconnect® does not charge for the App, however to utilize the Remote Services (e.g., Remote Door Lock/ Unlock) a subscription or trial is required to the Advantage Package. 2. Will my vehicle be safe if I lose my smartphone? People sometimes lose their phone, which is why security measures have been engineered into the Uconnect® Access App.
32 ALL ABOUT Uconnect® ACCESS Set up Via Mobile NOTE: If you’ve already registered with Uconnect® After registration, link your app accounts to your Via Access, but have not set up your Via Mobile apps, you Mobile Profile on Mopar Owner Connect. If you already can come back to this page at any time by logging in to moparownerconnect.com. Click on “Via Mobile Prohave an account with these apps, click “set up” to enter file”. your information.
ALL ABOUT Uconnect® ACCESS 33 • Click on Help & Support > Select your Brand > System NOTE: When connecting multiple devices, Via Mobile audio will stream using the BT Hands Free Profile, not Updates the Media (A2DP) profile. If using an iPhone®, a USB Using Via Mobile cable may also be used for the data connection. Launch the Uconnect® Access app on your connected Data Usage smartphone and log in with your Mopar Owner Connect Username/Email and password.
34 ALL ABOUT Uconnect® ACCESS Connection Status The Via Mobile button provides a status indication of the smartphone connection for Via Mobile app use. Under “Settings” in the Uconnect® Access app on your smartphone, confirm that Via Mobile data has been turned on.
ALL ABOUT Uconnect® ACCESS 35 2
36 ALL ABOUT Uconnect® ACCESS Purchasing Apps And WiFi Hotspot For Your Vehicle Purchasing Apps And WiFi Hotspot From Within Your Vehicle: Apps and WiFi Hotspot can be purchased from the 1. With the vehicle parked and the radio powered on, Uconnect® Store from within your vehicle, and online at press the “Apps” button located near the bottom the Mopar Owner Connect website right-hand corner of the radio touchscreen. moparownerconnect.com. You must first register and set up a Uconnect® Payment account.
ALL ABOUT Uconnect® ACCESS 37 2. To launch the Uconnect® Store, select Apps > All Apps 3. From the Uconnect® Store, select the service you wish > Uconnect® Store. to purchase.
38 ALL ABOUT Uconnect® ACCESS 4. This will launch the selected service or package into 5. The Uconnect® Store will display a “Purchase Overpurchase mode along with providing additional inforview” message confirming the financial details for the mation. The purchase process begins when you press App you are about to purchase. Press the “Purchase” the “Buy” button on the touchscreen. button on the touchscreen to continue.
ALL ABOUT Uconnect® ACCESS 39 6. The User must select “AGREE” to complete the pur- 7. The Uconnect® Store will ask you to “Confirm Paychase. “DISAGREE” will cancel the purchase and ment” using your default payment method on file in re-direct customers back to the Uconnect® Store landyour Uconnect® Payment Account. Press the “Coming page. plete” button on the touchscreen to continue.
40 ALL ABOUT Uconnect® ACCESS 8. The Uconnect® Payment Account will then ask for your “Payment PIN.” After entering this four digit PIN, press the “Continue” button on the touchscreen to make the purchase. NOTE: Purchased Apps and services can take up to 30 minutes to download, depending on your vehicle’s cellular coverage at time of purchase. If your download takes more than 30 minutes, please contact Uconnect® 9.
ALL ABOUT Uconnect® ACCESS 41 Purchasing Apps Online From Mopar Owner Connect Website You can also purchase Apps or renew your subscription to a package from the Mopar Owner Connect website. Log In to the Mopar Owner Connect website moparownerconnect.com with your username/email and password, and click on the “Store” tab. 1. Log In to Mopar Owner Connect with your username/email and password. 2. Click on the tab that says “Shop.
42 ALL ABOUT Uconnect® ACCESS 3. Click on the link to the Uconnect® Store. 4. You can now browse through the various packages, features and Apps available for your vehicle. Look through your options, read the details, and if you find something you want for your vehicle click on the “Purchase” button.
ALL ABOUT Uconnect® ACCESS 43 Using Mopar Owner Connect The Mopar Owner Connect website moparownerconnect.com provides you with all the information you need, all in one place. You can track your service history, find recommended accessories for your vehicle, watch videos about your vehicle’s features, and easily access your user guides and manuals. It is also where you can manage your Uconnect® Access account.
44 ALL ABOUT Uconnect® ACCESS 2. Edit Profile: To manage the details of your Uconnect® Access account, such as your contact information, password and PIN, click on the “Edit Profile” button to access the details of your account. 3. Shop: 5. Remote Services: For vehicles with an active Uconnect Access subscription, press one of these icons and enter your four-digit Uconnect® Security PIN to command your vehicle to remotely start, lock/unlock doors or sound the horn and lights.
ALL ABOUT Uconnect® ACCESS 45 8. Learn & Use: To get the Uconnect Access App from the Mopar Owner Click on the “Learn & Use” tab to find user guides and Connect website: other information about your vehicle. More specifi- 1. Log on to moparownerconnect.com using the cally, there is a dedicated Uconnect® Access tab in this username/email and password you used when regissection to learn all about your connected vehicle tering your Uconnect® Access system. capabilities.
46 ALL ABOUT Uconnect® ACCESS 5. You can enter up to five mobile phone and/or email addresses to your notifications, and you can customize which ones receive the types of messages. 6. If you add a mobile phone number, you will receive a confirmation text message asking to confirm and receive vehicle notifications. If you are OK with this, reply to the text message saying “yes” (message and data rates may apply, please see your mobile phone provider for details).
ALL ABOUT Uconnect® ACCESS 47 USING Uconnect® ACCESS Get started with your Uconnect® Access Apps by pressing the Uconnect® “Apps” button on the menu bar at the Getting Started With Apps bottom right corner of the in-vehicle touchscreen. AvailApplications (Apps for short) in your Uconnect® Access able Apps and features are organized by the tabs on the system are designed to deliver the features and services left of the screen. that you want.
48 ALL ABOUT Uconnect® ACCESS Access features work using the built-in cellular connection. Only Voice Texting the Uconnect® Access App and Via Mobile Apps require a compatible smartphone to work with your Uconnect® Access system. Uconnect® Access In-Vehicle Assistance Features With Uconnect® Access, your vehicle has on-board assistance features located on the rear view mirror designed to enhance your driving experience if you should ever need assistance or support.
ALL ABOUT Uconnect® ACCESS 49 NOTE: In case the “9-1-1” Call button is accidentally pushed, there is a 10 second delay before the 9-1-1 call is placed. The system will verbally alert you that a call is about to be made. To cancel the 9-1-1 Call connection, push the “9-1-1” Call button on the Rearview Mirror or press the “Cancellation” button on the Phone Screen. 2.
50 ALL ABOUT Uconnect® ACCESS Even if the 9-1-1 Call system is fully functional, factors • Wireless network congestion. beyond Chrysler Group LLC’s control may prevent or • Weather. stop 9-1-1 Call system operation. These include, but are not limited to, the following factors: • Buildings, structures, geographic terrain, or tunnels. • The ignition key has been removed from the ignition If your vehicle loses battery power for any reason (inand the delayed accessories mode is active.
ALL ABOUT Uconnect® ACCESS 51 Requirements • This feature is available only on vehicles sold in the US. • Vehicle must be properly equipped with the Uconnect® Access System. • Vehicle must be in range of a usable and authorized cellular signal. • Vehicle must be powered in the ON/RUN or ACC (Accessory) position with a properly functioning electrical system. WARNING! • Never place anything on or near the vehicle’s wireless and GPS antennas.
52 ALL ABOUT Uconnect® ACCESS WARNING! (Continued) WARNING! (Continued) • The Occupant Restraint Controller (ORC) turns on the Air Bag Warning Light on the instrument panel if a malfunction in any part of the air bag system is detected. If the Air Bag Warning Light is illuminated, the air bag system may not be working properly and the 9-1-1 system may not be able to send a signal to a 9-1-1 operator. If the Air Bag Warning Light is illuminated, have an authorized dealer service your vehicle immediately.
ALL ABOUT Uconnect® ACCESS 53 FAQs Roadside Assistance Call 1. What Happens If I Accidentally Push The 9-1-1 Easy Call To Roadside Assistance 24/7 Using Assist Button On The Mirror? You have 10 seconds after Button pushing the 9-1-1 button to cancel the call. To cancel the call, either push the “9-1-1” button again, or press the “cancel” button on the in-vehicle touchscreen. 2.
54 ALL ABOUT Uconnect® ACCESS • Vehicle Care — Total support for your Chrysler Group vehicle. With Uconnect® Access, your vehicle has on-board assistance features located on the rear view mirror designed to How It Works enhance your driving experience if you should ever need You or someone in the vehicle simply presses the ASSIST assistance or support. button located on the rear view mirror and you will be Description presented with your ASSIST options.
ALL ABOUT Uconnect® ACCESS 55 Requirements Disclaimers • This feature is available only on vehicles sold in the If Roadside Assistance is provided to your vehicle, you agree to be responsible for any additional roadside US. assistance service costs that you may incur. In order to • Vehicle must be properly equipped with the provide Uconnect® Services to you, we may record and Uconnect® Access System.
56 ALL ABOUT Uconnect® ACCESS FAQs Description 1. What Is The Phone Number For Roadside Assis- Yelp® is a familiar, widely used website and mobile app that connects people to great local businesses. Now with tance? The phone number is 800-521-2779. Uconnect® Access, Yelp® has been adapted for your NOTE: Some Apps are suspended while an Assist call is vehicle, and on the go capability. Yelp® gives you the active ability to search for a Point of Interest (POI) or desired 2.
ALL ABOUT Uconnect® ACCESS 57 • The live and local search engine will scan 12 categories How It Works and millions of POIs to provide drivers with a local 1. Using the touchscreen, launch Yelp® by pressing guide for real word-of-mouth recommendations. Apps > All Apps > Yelp®. • With one press, select from the list to find location OR address, phone number, user ratings, hours of operabutton and Using voice recognition, push the tion (if available) and price ratings (if available). say “Launch Yelp®.
58 ALL ABOUT Uconnect® ACCESS Give It A Try! 5. Using the touchscreen, select a restaurant from the list of search results. button on the steering wheel and say 1. Push the 6. Navigate to the location by pressing “Go Now” (if “Launch Yelp®.” equipped with navigation) 2. Push the button on the steering wheel and say NOTE: Save your destination to Favorites. To find it “Yelp® Search.” again go to Nav > Where to > Favorites. 3. Uconnect® will prompt you to say something like, “car wash.
ALL ABOUT Uconnect® ACCESS 59 Voice Command (VR button on steering wheel) #Launch Yelp®# Action Touchscreen Open Yelp® Apps > All Apps > Yelp® Press inside the #search# field. Using the keypad, type what you are looking for.
60 ALL ABOUT Uconnect® ACCESS Action Find nearest Find nearest Find nearest Find nearest Find nearest Find nearest Find nearest Select a POI Touchscreen Hotels Banks Parking Shopping Drugstores Urgent Care Hospitals Add a Custom Search Category Delete a Custom Category Select Hotels Select Banks Select Parking Select Shopping Select Drugstores Select Urgent Care Select Hospitals Select from the list Press the star to add it Press the star to remove it Voice Command (VR button on steering wheel) H
ALL ABOUT Uconnect® ACCESS 61 Press Best Match, Rating, or Distance Press Go Now Voice Command (VR button on steering wheel) – Press Rating – Press Go Now Press – Press Action Touchscreen Sort search results by Best Match, Rating or Distance Route to a POI (if equipped) Call a POI (via Bluetooth®) Give It A Try! 2
62 ALL ABOUT Uconnect® ACCESS • Vehicle must be registered with Uconnect® Access and have an active subscription that includes the appliYelp® provides the ability to save cuscable feature or App. tom search categories by first initiating the search, then pressing the star. To • Vehicle must be powered in the ON/RUN or ACC delete a search category, select it, and (Accessory) position with a properly functioning elecpress the star. A confirmation prompt trical system. will appear to confirm.
ALL ABOUT Uconnect® ACCESS 63 Tips And Shortcuts Safety Information WARNING! • ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume all risks related to the use of the Uconnect® features and applications in this vehicle. Only use Uconnect® when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. • It is not possible to use some of the touchscreen features while the vehicle is in motion (e.g. key pad).
64 ALL ABOUT Uconnect® ACCESS 3. Will Yelp® allow me to make a phone call to my desired search result? Yes. Phone must be paired and button a • To bypass the voice prompts hit the connected. second time to barge in and state your desired 4. How many search results does Yelp® generate at a command. time? Maximum of 20 listings. • To exit Yelp®, press the “X” (close) button in the upper right corner of the touchscreen. 5.
ALL ABOUT Uconnect® ACCESS 65 7. Why don’t I see the Yelp® App on my in-vehicle touchscreen? The vehicle must be registered with Uconnect® Access and have an active subscription that includes the applicable feature or App. The App may take several minutes to download after complet9. ing registration for the first time. 8. What is the difference between Yelp® and onboard navigation? Both experiences are slightly different, but may yield the same results.
66 ALL ABOUT Uconnect® ACCESS 10. How come I don’t see the same results when I use Yelp® on my smart phone? This is because Yelp® is only returning locations that have been rated by Yelp® users. Un-rated locations do not show up in the search results. This is an enhancement that will be coming soon. Description The Theft Alarm Notification feature notifies you via email or text message (SMS) when the vehicle’s factoryinstalled theft alarm system has been set-off.
ALL ABOUT Uconnect® ACCESS 67 1. Log on to the Mopar Owner Connect website 6. You will receive a confirmation text message, asking to confirm and receive vehicle notifications. If you are ok (moparownerconnect.com) using the username and password you used when registering your Uconnect® with this, reply to the text message saying “yes” Access system. (message and data rates may apply, please see your mobile phone provider for details).
68 ALL ABOUT Uconnect® ACCESS • Vehicle must be registered with Uconnect® Access and FAQs have an active subscription that includes the appli1. What do I do if my Theft Alarm goes off? In the event cable feature or App. your theft alarm is activated, use caution and evaluate • Owner must properly set-up notification to have the the situation from a safe distance.
ALL ABOUT Uconnect® ACCESS 69 3. Can I receive a text message (SMS) when my Theft Alarm goes off? Yes. Text messages are a convenient and quick way to receive notifications. You can manage your notifications by going to the Mopar Owner Connect website (moparownerconnect.com) and log in with your username and password. Once there, you can click on “Edit Profile”, then the “Notifications” tab to add, remove and edit your notification options.
70 ALL ABOUT Uconnect® ACCESS 2. Next, inform Uconnect® Care that your vehicle has Requirements been stolen. Uconnect® Care can be reached by calling • Vehicle must be properly equipped with the 855-792-4241. The Uconnect® Care Agent will ask for Uconnect® Access System. the stolen vehicle report number (as issued by your local law enforcement). • Vehicle must be in range of a usable and authorized cellular signal.
ALL ABOUT Uconnect® ACCESS 71 FAQs 3. How will I know if my vehicle is recovered? After you provide the Uconnect® Care Agent with the stolen vehicle report, the agent will work together with law enforcement to try to locate your vehicle. If your vehicle is recovered, you will be contacted by law enforcement. 1. What do if my vehicle is stolen? First, call local law enforcement as soon as possible. They will work with you to file a stolen vehicle report.
72 ALL ABOUT Uconnect® ACCESS WiFi Hotspot WARNING! Create A 3G WiFi Hotspot For Use In Your Vehicle Description Do Not use the WiFi Hotspot while operating the vehicle. Only use the WiFi Hotspot when it is safe to do so. WiFi Hotspot is on-demand WiFi + 3G • Enables all your passengers to be simultaneously connected to the web. connectivity that’s built-in and ready to go whenever you are. Once your • Connect several devices at one time.
ALL ABOUT Uconnect® ACCESS 73 How It Works Give it a Try! The WiFi Hotspot feature provides the vehicle passengers 1. Purchase a subscription to the WiFi Hotspot feature with an internet access hot spot in the vehicle, using the for a day, a week, or a month. You can buy WiFi radio as an access point.
74 ALL ABOUT Uconnect® ACCESS 2. After purchasing WiFi Hotspot, it will be enabled/ turned on in your vehicle. The WiFi Hotspot App can be found on your in-vehicle touchscreen by selecting Apps > All Apps > WiFi Hotspot. 3. WiFi Hotspot should be turned on after purchasing a subscription. To disable WiFi Hotspot, simply press to uncheck the box to the right of the App (this feature is available while the vehicle is in motion).
ALL ABOUT Uconnect® ACCESS 75 2 Optional: Give your hot spot a unique name by 4. From your in-vehicle touchscreen, select the appropripressing Hotspot Name (key pad is not available ate in-vehicle network and the desired security level while vehicle is in motion). setting. Each security level has different pass phrase constraints. Change the security level setting by selecting the checkbox for any of the following security settings.
76 ALL ABOUT Uconnect® ACCESS • WPA2/WPA — “WiFi Protected Access” – This is the NOTE: Refer to your device’s owner’s manual for spedefault security and can be changed by pressing cific information related to your device. WiFi Hotspot > View/Edit Pass phrase. • WEP — “Wired Equivalent Privacy” – Pass phrase must be 13 characters long. • None — No security, will not prompt you for a pass phrase, when you attempt to connect to WiFi Hotspot. 5. From your Wi-Fi enabled device (laptop, tablet, etc.
ALL ABOUT Uconnect® ACCESS 77 • Vehicle must be registered with Uconnect® Access and have an active WiFi Hotspot subscription ( WiFi Outpost will be turned off if there is no active subscription). • Vehicle must be in the ON/RUN or ACC (Accessory) position and have a properly operating electrical system for any of the in-vehicle Uconnect® features to function.
78 ALL ABOUT Uconnect® ACCESS • While the vehicle is in motion it is possible to enable or Tips And Shortcuts disable the WiFi Hotspot. Simply press to check or • Give your WiFi Hotspot a unique name by pressing uncheck the box to the right of the App. “Hotspot Name” within the WiFi Hotspot App. • For your own safety, it is not possible to use some of • To view a list of connected devices, press “View the touchscreen features while the vehicle is in motion.
ALL ABOUT Uconnect® ACCESS 79 4. What if I want to create a custom password for my connection? Select either WPA2/WPA or the WEP 1. How do I know if I have a good signal strength? setting and create a pass phrase by pressing Apps > There is a signal strength indicator on the Apps button All Apps > WiFi Hotspot > View/Edit Pass phrase. of the radio touchscreen. 5. I do not see the connection on my wireless laptop or 2.
80 ALL ABOUT Uconnect® ACCESS SRT Performance Pages/SRT Performance Pages Plus How It Works From the Radio touchscreen Save And Share Your Best Performance Results With 1. Press the “SRT & Apps” button at the bottom of the The SRT Performance Pages App. (Available Only On screen. SRT Performance Vehicles.) 2. Select the “Information Apps” button on left side of Description screen. The SRT Performance Pages App gives SRT vehicle drivers the tools to become familiar with their vehicle’s 3.
ALL ABOUT Uconnect® ACCESS 81 2 5. You can navigate between the Menu item performance button tabs on the left side of screen.
82 ALL ABOUT Uconnect® ACCESS 1 — Home 2 — Timers 3 — G-Force 4 — Gauges 1 5 — “Scroll Down” Button 1 2 3 4 — — — — Gauges 2 Engine Options “Scroll Up” Button
ALL ABOUT Uconnect® ACCESS 83 6. If you chose the Timers tab, you will get an overview of vehicle run time stats. You can view and compare driving performance by choosing between your “Best,” “Last” and “Current” run times. This data can be saved, downloaded and shared.
84 ALL ABOUT Uconnect® ACCESS
ALL ABOUT Uconnect® ACCESS 85 USB — If you choose “USB,” plug the USB stick into the Choosing the “Save” button on the touchscreen allows USB port, press the “USB” button on the touchscreen, you to save your run ticket. Data saved will include date, and follow the instructions to download the timer. time stamp, timer data, brake distance and brake speed.
86 ALL ABOUT Uconnect® ACCESS Once the option to Save is selected, you will receive a The file will save with the name: RunType, Date and confirmation notification. If you selected to save to the Time file was saved, and Vehicle Line. Example of a website, the URL will be provided where you can view saved file name is “Best_19JAN11_0930AM_Viper.html” performance data and download the ticket.
ALL ABOUT Uconnect® ACCESS 87 Only the 10 most recent saved runs will be stored and 7. If you chose the G-Force tab, you will see displays of available on the website, so the oldest run will be the vehicle dynamics from G-Force page including overwritten for another if there are already 10. Each information such as: saved run will be stored on the website until it is • Vehicle Drift Graphic — Vehicle graphic will adjust overwritten. based on vehicle’s movement.
88 ALL ABOUT Uconnect® ACCESS 8. If the Gauges 1 tab is chosen, you will see a display of 9. If the Gauges 2 tab is chosen, you will see a display of vehicle gauges. Information displayed will be the vehicle gauges with information such as: same as on the instrument cluster such as: • Oil Temperature • Oil Temperature • Battery Voltage • Battery Voltage • Oil Pressure • Oil Pressure • Coolant temperature • Intake Air Temperature 10.
ALL ABOUT Uconnect® ACCESS 89 NOTE: Graphic will represent the owner’s vehicle, e.g. Viper or Grand Cherokee. • Vehicle Color Options — Customize the color of the vehicle displayed on the home picture. • Accept Button — Saves your selections. 11. If the Options tab is chosen, it will allow the driver to add details to the graphic display of the vehicle on the radio touchscreen such as: • Home Picture — Select a vehicle image to be displayed.
90 ALL ABOUT Uconnect® ACCESS Give It A Try! 6. Bring the vehicle to a complete stop after reaching the target speed or distance. 1. Bring the vehicle to a complete stop, but leave vehicle ON for the instrument gauges to be active. 7. You can view the Timer performance data on the radio from the drive cycle by selecting the “Apps” button on 2. Select the “Apps” button at bottom of radio touchthe faceplate, then the Information Apps button, then screen. SRT Performance pages tab: 3.
ALL ABOUT Uconnect® ACCESS 91 • Vehicle must be powered in the ON/RUN or ACC • Upon accessing the Timers screen after an ignition (Accessory) position with a properly functioning eleccycle and/or battery disconnect, the driver will see the trical system. “Best” set of values for all performance indicators, as received from the cluster.
92 ALL ABOUT Uconnect® ACCESS 5. What is the difference between SRT Performance Pages and SRT Performance Pages Plus? SRT PerforHow do I get SRT Performance Pages? This App is mance Pages Plus gives you the additional option to pre-loaded from the factory. save performance data to the web. Do I turn Performance Pages “ON” or “OFF” at any 6. Do I have to do anything to turn on the Timers data? time? No.
ALL ABOUT Uconnect® ACCESS 93 9. What are “Timer Constraints” or criteria that needs to be met to show performance data? • 0-60 MPH or 0-100 kph ET reached within 10 seconds • Distance of 1/4 mile and 1/8 mile • Brake timer when traveling > 30 MPH • A braking event goes beyond 30 seconds 10. How many Timers are stored on the radio and for how long? Performance timers are maintained as long as you drive the vehicle. You can save the statistics at any time. 11.
94 ALL ABOUT Uconnect® ACCESS How It Works Set Up Your Phone To Work With Voice Texting NOTE: If phone supports MAP, then ensure MAP is on and incoming message notification is enabled, (see UconnectPhone.com for phone specific instructions). After pairing your phone to the vehicle using Bluetooth® Follow the steps below to see if your phone can set up to (see UconnectPhone.com), push the “phone” button on the menu bar of the radio to see the main Phone screen. work with Voice Texting.
ALL ABOUT Uconnect® ACCESS 95 Generic Phone Setup Instructions (your phone’s setup If a Bluetooth® authorization window appears showing process may be similar): your phone requesting permissions, check the box for Always and press Accept. 1. On phone select “Settings” (or the equivalent on your Sending A New Text Message From Radio phone) on the steering wheel. 2. Select Wireless/Bluetooth® settings 1. Push 3. Ensure Bluetooth® is on (box checked) 2. Say “Send text message.” 4.
96 ALL ABOUT Uconnect® ACCESS Dictate A Free-Form Reply To A Message From Radio 4. The system will repeat the message you dictated and (Voice Text Reply) state available commands. If your message was too long, the system will respond with “Your message was 1. Say “Reply to message n” too long. Your message was truncated.” Say “Send,” or n = the number of the message “Start Over” or “Continue.” OR 5.
ALL ABOUT Uconnect® ACCESS 97 To Reply To A Message With A Pre-Formatted Re- 1. Press “View” next to the message sponse (Voice Text Reply) 2. Press “Reply” 3. Select the pre-formatted response by pressing it (“I can’t talk right now”) 4. Press “Send” Viewing Or Listening To Incoming Messages To Listen to a Message from Radio 1. Push the #Phone# button on the steering wheel. Say $Listen to message$ OR NOTE: This function only operates while the vehicle is not in motion.
98 ALL ABOUT Uconnect® ACCESS Viewing Your Messages 1. Push the “Phone” button on the steering wheel. 2. Say “View message.” OR Press “View” on the in-vehicle touchscreen.
ALL ABOUT Uconnect® ACCESS 99 OR Say “Show message n” n = the number of the message Listening To A Message 1. Press “Listen” on the touchscreen or push the “Phone” button on the steering wheel and say “Listen,” the Uconnect® system will read the received text message over the vehicle audio system.
100 ALL ABOUT Uconnect® ACCESS user can press #Listen# on touchscreen or push the • Customer must have a properly paired and connected #Phone# button on the steering wheel and say #Listen.# cellular device with Bluetooth® Message Access Profile (MAP) enabled. Voice Texting is compatible with Requirements many newer BlackBerry and Android mobile devices. • (MAP may not be compatible with Apple iPhones® Apple iOS 5 and earlier does not support MAP so (pre iOS 6).
ALL ABOUT Uconnect® ACCESS 101 • Chrysler Uconnect® and its affiliates are not respon- FAQs sible for errant text messages. 1. Can I still voice text if my phone is not listed? We are • Vehicle must be registered with an active Uconnect® constantly testing phones and updating our compatAccess trial or paid subscription. ibility database.
102 ALL ABOUT Uconnect® ACCESS 3. My “Messaging” button on the touchscreen is White, 6. Does Voice Texting work with accents? Speech isn’t perfect. Technology isn’t perfect. While Chrysler but I can only use pre-formatted responses. The Voice strives to use the latest voice recognition engine, the Texting free-form voice response requires a subscriptechnology may have difficulty with strong accents. tion to the Uconnect® Access Advantage package. (Some phones will support pre-formatted responses, 7.
ALL ABOUT Uconnect® ACCESS 103 10. Can I use Text Messaging if the “messaging” button doesn’t turn white? Only MAP compatible phones will work with Text Messaging. If your phone is compatible, the “messaging” light will turn white, after the phone is Bluetooth® connected, and you will then be able to do hands free Text Messaging.
104 ALL ABOUT Uconnect® ACCESS 4. The Uconnect® Access App will confirm if your command was sent (or not). Press “OK” to close the pop-up screen. 5. It will take a little while for the command to go through to your vehicle. The time it takes depends on a number of technical conditions. 6. A message will appear on the screen to let you know if the command was received by your vehicle. Mopar® Owner Connect website: 1. Log on to the Mopar® Owner Connect website (moparownerconnect.
ALL ABOUT Uconnect® ACCESS 105 2. If you have more than one vehicle registered into the Mopar® Owner Connect website (moparownerconnect.com), select the vehicle you want to send the command by clicking on its image along the top. 2 3. Beneath the image of a vehicle like yours, you will see a row of icons. To lock the doors, click on the closed lock icon; to unlock the driver’s door click on the “open lock icon.” 4.
106 ALL ABOUT Uconnect® ACCESS 3. After providing your Uconnect® Security PIN, you can ask them to lock or unlock your vehicle. The agent 1. If you need to unlock the doors of your vehicle, will send a command to your vehicle to get the task contact Uconnect® Care by calling 855-792-4241. done. NOTE: The Uconnect® Care agents are trained to help Give It A Try! you with unlocking of your door (for example, in an accidental lock-out).
ALL ABOUT Uconnect® ACCESS 107 • Your request will typically take about to 3 minutes to • An ignition cycle is required for some remote comprocess. If your vehicle has been parked for a while it mands such as Remote Vehicle Start and Remote Door can take up to 30 minutes for the request to reach your Lock/Unlock if following a Remote Horn and Lights vehicle and perform the task. activation. Requirements FAQs • Vehicle must be properly equipped with the 1.
108 ALL ABOUT Uconnect® ACCESS 3. Will my vehicle be safe if I lose my smartphone? 5. Why is the Uconnect® Access App running slow? People sometimes lose their phone, which is why The Uconnect® Access App relies on the cellular security measures have been engineered into the connection from your smartphone to send commands Uconnect® Access App. Asking for your username, to your vehicle.
ALL ABOUT Uconnect® ACCESS 109 Description The Remote Vehicle Start feature provides you with the ability to start the engine on your vehicle, without the keys and from virtually any distance. Once started, the pre-set climate controls in your vehicle can warm-up or cool-down the interior before you have to get in. You can send a request to your vehicle in one of two ways: This remote function requires your vehicle to be equipped with a factory-installed Remote Start system.
110 ALL ABOUT Uconnect® ACCESS 4. The Uconnect® Access App will confirm if your command was sent (or not). Press “OK” to close the pop-up screen. 5. It will take a little while for the command to go through to your vehicle. The time it takes depends on a number of technical conditions. 6. A message will appear on the screen to let you know if the command was received by your vehicle. Mopar Owner Connect website: 1. Log on to the Mopar Owner Connect website (moparownerconnect.com) using the username and 3.
ALL ABOUT Uconnect® ACCESS 111 2. If you have more than one vehicle registered into the Mopar Owner Connect website (moparownerconnect.com), select the vehicle you want to send the command by clicking on its image along the top. 2 3. Beneath the image of a vehicle like yours, you will see a row of icons. To start the engine, press the “circular arrow”, to turn-off an engine that has been remote started press the “cancel” button. 4.
112 ALL ABOUT Uconnect® ACCESS Uconnect® Care: Give It A Try! 1. If you need to unlock the doors of your vehicle, • Download the Uconnect® Access App to your smartphone. contact Uconnect® Care by calling 855-792-4241. NOTE: The Uconnect® Care Agents are trained to help • Enter the username and password that you established for the Mopar Owner Connect website you with unlocking of your door (for example, in an (moparownerconnect.com) during registration of accidental lock-out).
ALL ABOUT Uconnect® ACCESS 113 Requirements FAQs • Vehicle must be properly equipped with the 1. How long does it take to remote start my vehicle? Uconnect® Access System and factory installed ReDepending on various conditions, it can take three mote Start capabilities. minutes or more for the request to get through to your vehicle, although Uconnect® is always striving to • Vehicle must be in range of a usable and authorized improve performance. cellular signal. 2.
114 ALL ABOUT Uconnect® ACCESS 3. Will my vehicle be safe if I lose my smartphone? 6. Why can’t all phones use the Uconnect® Access People sometimes lose their phone, which is why App? The Uconnect® Access App has been designed security measures have been engineered into the to work on most smartphones with the Apple and Uconnect® Access App. Asking for your username, Android operating systems.
ALL ABOUT Uconnect® ACCESS 115 • Using the Uconnect® Access App from a compatible 3. A pop-up screen will appear asking for your Uconnect® Security PIN (this is the same 4- digit code smartphone established when your registered your Uconnect® • From the Mopar Owner Connect website Access system). Enter the Uconnect® Security PIN on (moparownerconnect.com) the keypad and press “OK.” • Contacting Uconnect® Care 4.
116 ALL ABOUT Uconnect® ACCESS Mopar Owner Connect website: 1. Log on to the Mopar Owner Connect website (moparownerconnect.com) using the username and password you used when registering your Uconnect® Access system. • If you forgot your username or password, links are provided on the website to help you retrieve them. 2. If you have more than one vehicle registered into the Mopar Owner Connect website (moparownerconnect.
ALL ABOUT Uconnect® ACCESS 117 5. A message will appear on the screen to let you know 3. After providing your Uconnect® Security PIN, you can ask them to lock or unlock your vehicle. The agent if the command was received by your vehicle. will send a command to your vehicle to get the task Uconnect® Care: done. 1. If you need to unlock the doors of your vehicle, Give It A Try! contact Uconnect® Care by calling 855-792-4241.
118 ALL ABOUT Uconnect® ACCESS • Push the button to sound your vehicle’s horn and flash • If using the Uconnect® Access App to command your the lights. vehicle, your smartphone must be compatible and in range of a cellular signal. • Your request will typically take about to three minutes to process.
ALL ABOUT Uconnect® ACCESS 119 FAQs 1. How long does it take to sound my horn and flash the lights? Depending on various conditions, it can take three minutes or more for the request to get through to your vehicle, although Uconnect® is always striving to improve performance. 4. How do I turn off the horn and lights after I turn them on? By pressing the “horn icon” a second time on your Uconnect® Access App, a second command will be sent to shutoff the horn and lights.
120 ALL ABOUT Uconnect® ACCESS Via Mobile Apps • Pandora® offers personalized radio based on your favorite artists, or songs and can create a custom Pandora® — If Equipped #station# playing similar music. Custom stations are Pandora® gives people the music and comedy they love created on the Pandora® website or the mobile app. anytime, anywhere.
ALL ABOUT Uconnect® ACCESS 121 How It Works 3. Next, link app accounts to your Via Mobile profile by entering your login information for Pandora®. Via Mobile uses the Uconnect® Access smartphone app If you’ve already registered with Uconnect® Access, and your smartphone’s data plan to access your personal log in to moparownerconnect.com to set up your Via Pandora® account from the vehicle and control it using Mobile profile. Click on “Via Mobile Profile.” the vehicle touchscreen.
122 ALL ABOUT Uconnect® ACCESS 5. Launch the Uconnect® Access app on your connected smartphone and log in with your Mopar Owner Connect Username/Email and password. From the vehicle touchscreen press the “Apps” button and select Pandora® from the list. Pandora® is located within the “All Apps” tab. To launch Pandora® using voice recognition, push the button on the steering wheel and say, “launch Pandora Via Mobile.
ALL ABOUT Uconnect® ACCESS 123 2 Each time you want to use a Via Mobile app in your vehicle, the Uconnect® Access App must be running on your smartphone and the smartphone must be paired via Bluetooth®.
124 ALL ABOUT Uconnect® ACCESS A message will be displayed to remind you that Via Mobile apps utilize the data plan on your connected smartphone to provide content. Press “OK” to continue or the “X” to exit. NOTE: Many smartphones have a limit to how much data they can utilize before incurring additional charges. The amount of data being used varies by smartphone device, cellular service provider and specific app. Check your smartphone service plan for more details.
ALL ABOUT Uconnect® ACCESS 125 3. To go back and select a different station, press the “Station List” button on the touchscreen. Requirements • Vehicle must be properly equipped with the Uconnect® Access System. • Your smartphone must be compatible with the Uconnect® Access App and properly connected to the vehicle. Give it a try! 1. From the vehicle touchscreen select Pandora® from button on the steering the apps list, or push the wheel and say, “launch Pandora® Via Mobile.” 2.
126 ALL ABOUT Uconnect® ACCESS • Vehicle must be equipped with Uconnect 8.4A/8.4AN. Not available on Uconnect 5.0. Tips and Shortcuts The Uconnect® Access App must be open and you must be logged in. A blue light indicates that it’s providing data to the vehicle. • If you recently changed your password for Pandora®, it may need to be updated on Mopar Owner Connect under the “Via Mobile” section. • Pandora® will launch with the last setting and play list you chose.
ALL ABOUT Uconnect® ACCESS 127 5. Can I customize my Pandora® stations? The 8. How do I block explicit content? Customers have the “Thumbs up” and “Thumbs down” buttons on the ability to block explicit content by adjusting their touchscreen are used to personalize stations based on settings through the Pandora® website at pandora.com or through the Pandora® mobile app. the currently playing track. Give a track the “thumbs up” to hear more tracks with similar qualities, or 9.
128 ALL ABOUT Uconnect® ACCESS iHeartRadio — If Equipped • Launch iHeartRadio using Voice Recognition (VR) or through touchscreen controls. iHeartRadio provides instant access to more than 1,500 live radio stations from across the country and allows • Browse, listen, and save radio stations for easy access. listeners to create custom music stations inspired by their • Browse and create custom stations (e.g. Zac Brown Band). favorite artists or songs.
ALL ABOUT Uconnect® ACCESS 129 the vehicle touchscreen. A compatible smartphone is 4. Connect your smartphone to the vehicle touchscreen. The Uconnect® Access app is compatible with select required. The iHeartRadio mobile app on your phone iPhone® and Android smartphones. Visit does not need to be launched to use iHeartRadio Via UconnectPhone.com to confirm that your smartMobile. phone is compatible with Uconnect®. Once you’ve 1.
130 ALL ABOUT Uconnect® ACCESS Ensure that Via Mobile data has been turned on under “Settings” in the Uconnect® Access App. A green indicator next to the words “Via Mobile” will show when it is ready to provide data to the vehicle touchscreen (a blue indicator when data is being sent). A red indicator means that it is not ready to provide data.
ALL ABOUT Uconnect® ACCESS 131 A message will be displayed to remind you that Via Mobile apps utilize the data plan on your connected smartphone to provide content. Press “OK” to continue or the “X” to exit. NOTE: Many smartphones have a limit to how much data they can utilize before incurring additional charges. The amount of data being used varies by smartphone device, cellular service provider and specific app. Check your smartphone service plan for more details.
132 ALL ABOUT Uconnect® ACCESS Give it a try! 1. From the vehicle touchscreen select iHeartRadio from button on the steering the apps list, or push the wheel and say, “launch iHeartRadio Via mobile.
ALL ABOUT Uconnect® ACCESS 133 2. The app will launch, presenting you with a convenient 5. To find a local, live radio station, return to iHeartRadio interface to use while in your vehicle. You will have Home and select “Stations Near You.” four options to select from: • Select a station from the list • My Stations – Access stations you’ve saved and created. • Stations Near You – Listen to live radio stations broadcasting from your local area.
134 ALL ABOUT Uconnect® ACCESS Requirements Tips and Shortcuts • Vehicle must be properly equipped with the • Continually refine stations to your liking using the Uconnect® Access System. “Thumbs Up” or “Thumbs Down” buttons. • Your smartphone must be compatible with the • Press the “HOLD to Set” button on the top of the Uconnect® Access App and properly connected to the screen for three seconds to add current station as a vehicle. preset. Set up to 10 presets.
ALL ABOUT Uconnect® ACCESS 135 FAQs 2. How do I personalize the music played on my custom station? Press the “thumbs up” icon when music is played that you like, and the “thumbs down” icon when music is played that you do not like. Future music played will give you more of the music with characteristics that meet your preferences. The more often you use Thumb Up and Thumbs Down, the better your station becomes. 1.
136 ALL ABOUT Uconnect® ACCESS 5. Can I create an iHeartRadio account during 9. How do I know how much data is being used? Uconnect® Access Via Mobile uses your smartphone’s Uconnect® Access registration and set-up? There is a existing data plan to stream content. Data usage varies link from the Via Mobile profile page where the by phone/device, content (e.g. videos), high quality customer can go to iHeartRadio’s website to create a audio and several other factors. Please refer to your new account.
ALL ABOUT Uconnect® ACCESS 137 • Reduce the need to use your smartphone to access • Listen to customized stations based on your favorite artists and music. Slacker Radio so you can stay focused on driving. • Launch Slacker Radio using Voice Recognition (VR) or • Continually refine stations to your liking using the “Heart,” “Ban Artist” or “Ban Song” controls. through touchscreen controls. • Leverage existing Slacker Radio account.
138 ALL ABOUT Uconnect® ACCESS 1. If you have not registered with Uconnect® Access, 4. Next, connect your smartphone to the vehicle touchscreen. The Uconnect® Access app is compatible with begin by pressing the “Apps” button on the touchselect iPhone® and Android smartphones. Visit screen inside your vehicle, and then press “Uconnect UconnectPhone.com to confirm that your smartRegistration.” phone is compatible with Uconnect®. Once you’ve 2.
ALL ABOUT Uconnect® ACCESS 139 Ensure that Via Mobile data has been turned on under “Settings” in the Uconnect® Access App. A green indicator next to the words “Via Mobile” will show when it is ready to provide data to the vehicle touchscreen (a blue indicator when data is being sent). A red indicator means that it is not ready to provide data.
140 ALL ABOUT Uconnect® ACCESS Each time you want to use a Via Mobile app in your vehicle, the Uconnect® Access App must be running on your smartphone and the smartphone must be paired via Bluetooth®. A message will be displayed to remind you that Via Mobile apps utilize the data plan on your connected smartphone to provide content. Press “OK” to continue or the “X” to exit. NOTE: Many smartphones have a limit to how much data they can utilize before incurring additional charges.
ALL ABOUT Uconnect® ACCESS 141 2 Give it a try! 1. From the vehicle touchscreen select Slacker Radio button on the from the apps list, or push the steering wheel and say, “launch Slacker Via Mobile.
142 ALL ABOUT Uconnect® ACCESS 2. Select Slacker Radio Stations 3. Select Top Stations > Today’s Hits • Vehicle must be registered with Uconnect® Access and have an active subscription that includes the applicable feature or App. Your chosen station will play. Use the “Heart” and “Ban” • Vehicle must be powered in the ON/RUN or ACC buttons on the touchscreen to quickly and easily custom(Accessory) position with a properly functioning elecize your experience.
ALL ABOUT Uconnect® ACCESS 143 2. How do I customize the music being played on the station? As you listen to music, use the button on the 1. Why can’t I get Slacker Radio Via Mobile to work? touchscreen to confirm your preference to the music Here are some things to consider: currently being played. Press the “like” icon to con• Check to ensure you have linked your Slacker Radio firm what you want to hear more of, and the “dislike” account credentials with Uconnect® Access.
144 ALL ABOUT Uconnect® ACCESS 5. Can I create a Slacker Radio account during 8. Should I have the Slacker Radio app downloaded to my smartphone to use Uconnect® Access Via MoUconnect® Access registration and set-up? There is a bile? You do not need to have the Slacker Radio app link from the Via Mobile profile page where the on your smartphone to use Slacker Radio Via Mobile. customer can go to Slacker Radio’s website to create a However, the Uconnect® Access App is required. new account. 6.
ALL ABOUT Uconnect® ACCESS 145 • Ability to perform location-based local searches (e.g. “Hungry” and “Coffee”) and route to a point of Aha™ lets you easily access and organize your favorite interest by sending the address to the navigation web content on your phone, then seamlessly integrates system (if nav equipped). the experience with your vehicle. • Real-time traffic reports and audio books (read aloud).
146 ALL ABOUT Uconnect® ACCESS 1. If you have not yet registered with Uconnect® Access, 4. Next, connect your smartphone to the vehicle touchscreen. The Uconnect® Access app is compatible with begin by pressing the “Apps” icon on the touchscreen select iPhone® and Android smartphones. Visit inside your vehicle, then pressing “Uconnect RegistraUconnectPhone.com to confirm that your smarttion.” phone is compatible with Uconnect. Once you have 2.
ALL ABOUT Uconnect® ACCESS 147 Ensure that Via Mobile data has been turned on under “Settings” in the Uconnect® Access App. A green indicator, next to the words “Via Mobile,” will show when it is ready to provide data to the vehicle touchscreen (a blue indicator when data is being sent). A red indicator means that it is not ready to provide data.
148 ALL ABOUT Uconnect® ACCESS Each time you want to use a Via Mobile app in your vehicle, the Uconnect® Access App must be running on your smartphone and the smartphone must be paired via Bluetooth®. A message will be displayed to remind you that Via Mobile apps utilize the data plan on your connected smartphone to provide content. Touch “OK” to continue or the “X” to exit. NOTE: Many smartphones have a limit to how much data they can utilize before incurring additional charges.
ALL ABOUT Uconnect® ACCESS 149 2
150 ALL ABOUT Uconnect® ACCESS Give it a try! • Nearby – Search for POIs from the following categories: Hungry, Coffee, Hotels, Weather • Settings – Designate preference to allow explicit content 1. From the vehicle touchscreen select Aha™ from the button on the steering apps list, or push the wheel and say, “launch Aha™ Via Mobile.” • If you have not used Aha™ before, you will see a list 3. Select the “List” button on the touchscreen to see of default stations.
ALL ABOUT Uconnect® ACCESS 151 Requirements Tips and Shortcuts • Vehicle must be properly equipped with the • Use the “like” and “dislike” option to continue to Uconnect® Access System. refine music played on stations like Slacker. • Your smartphone must be compatible with the • Link your Facebook® and Twitter® account on the Uconnect® Access App and properly connected to the Aha™ website to share with others what you are vehicle. listening to while you drive.
152 ALL ABOUT Uconnect® ACCESS • If you recently changed your password for Aha™, it 4. How do I sync my Aha™ account with Facebook®, may need to be updated on Mopar Owner Connect Twitter® and Slacker? Associate your Aha™ account under the “Via Mobile” section. with Facebook®, Twitter® and Slacker services at aharadio.com, or from the Aha™ smartphone app. 2.
ALL ABOUT Uconnect® ACCESS 153 6. Why can’t I get Aha™ Via Mobile to work? Ensure 9. Can I create an Aha™ account during Uconnect® Access registration and setup? There is a link from the you have registered for Uconnect® Access and assoVia Mobile profile page where the customer can go to ciated your Aha™ account credentials with the Aha™ website to create a new account. Uconnect® Access. This is done during registration and setup process. Then, ensure you have properly 10.
154 ALL ABOUT Uconnect® ACCESS 12. How do I know how much data is being used? Uconnect® Access Via Mobile uses your smartphone’s existing data plan to stream content. Data usage varies by phone/device, content (e.g. videos), high quality audio and several other factors. Please refer to your device carrier for specific details. MAINTAIN MY Uconnect® ACCESS ACCOUNT Reinstalling An App From the in-vehicle touchscreen do the following: 1. Press the Uconnect® “App” button and open the Uconnect® Store.
ALL ABOUT Uconnect® ACCESS 155 2 2. In “My Apps,” select “Settings” and then “Reinstall App” and “Continue.
156 ALL ABOUT Uconnect® ACCESS
ALL ABOUT Uconnect® ACCESS 157 3. Your Apps have been successfully re-installed. Connect website (moparownerconnect.com). On Mopar Owner Connect, go to Uconnect® Store, and click on “Remove My Vehicle.” For further assistance call Uconnect® Care at 855792-4241. 1. Press the Uconnect® “Apps” button and open the Uconnect® Store. Select “My Apps.” How To Remove My Uconnect® Access Account To remove your Uconnect® Access account or cancel your Uconnect® Access subscription, follow the instructions below.
158 ALL ABOUT Uconnect® ACCESS 2. In “My Apps”, select “Settings” and then “Remove Uconnect® Account” and “Continue.
ALL ABOUT Uconnect® ACCESS 159 2
160 ALL ABOUT Uconnect® ACCESS 3. Your Apps have been successfully removed. a Vehicle. Connected vehicles must follow the secure registration process to be added to an account. Uconnect® CARE & FAQs For additional information about Uconnect® Access, push the ASSIST button on the rear view mirror and then select Uconnect® Care on your in-vehicle touchscreen to contact Uconnect® Care. Your call will be directed to a Uconnect® Care agent or held in a queue until an agent is available.
ALL ABOUT Uconnect® ACCESS 161 1. How Do I Register For My Uconnect® Access Ac- 4. What If I Forgot My Uconnect® Security PIN? If count? Press the “Apps” button on the in-vehicle you’ve already registered and forgot your Uconnect® touchscreen, then select Uconnect® Registration. Security PIN, you can reset the pin by selecting Edit Profile on the Mopar Owner Connect website 2. Why Do I Need An Email Address? Without an email (moparownerconnect.
162 ALL ABOUT Uconnect® ACCESS b. Make your edits and click “Save.” 7. What If I Forgot My Uconnect® Payment PIN? The next time you are asked for your Uconnect® Payment 10. Can I Try Apps, Features Or Packages Before I Buy PIN, select “Forgot PIN?” and follow the steps to reset Them? Your new vehicle purchase may have come it. with an included trial period for certain Apps and services. For more information please contact 8. How Do I Update My Uconnect® Payment Account Uconnect® Care at 855-792-4241.
ALL ABOUT Uconnect® ACCESS 163 13. How Do I Know When A New App, Feature Or 17. How Do I Purchase A Subscription Or WiFi Hotspot? From your in-vehicle touchscreen: Package Is Offered? Go to Uconnect® Store to check for updated features, packages and Apps. a. Select Apps > All Apps > Uconnect® Store. 14. Will I Be Notified When My Subscription Is Exb. Choose a package or service. pired Or Will It Automatically Renew? There is no c.
164 ALL ABOUT Uconnect® ACCESS 19. How Do I Find Out How Much Longer I Have On 23. How Do I Cancel My Subscription? From your My Subscription? From your in-vehicle touchscreen in-vehicle touchscreen, select Apps > All Apps > > select Apps > All Apps >Uconnect® Store > My Uconnect® Store > My Apps > Settings > Remove Apps and choose a subscription to view its expiration Uconnect® Account. date. When your subscription is about to expire you 24.
ALL ABOUT Uconnect® ACCESS 165 26. How Do I Re-Initiate A Download App If There b. Choose Remove Uconnect® Account and follow Was An Error? If you’re having issues with an App the instructions. you can reinstall it. This returns the App to its 28. What If I Forgot To Remove My Account Informaoriginal state which usually fixes the problem. This tion Before I Returned My Lease Vehicle Or Sold It? does not affect your Uconnect® subscriptions or Don’t worry – your information is secure.
166 ALL ABOUT Uconnect® ACCESS Safety Guidelines WARNING! ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume all risks related to the use of the Uconnect® features and applications in this vehicle. Only use Uconnect® when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. • Stop use of the system immediately if a problem occurs. Failure to do so may cause injury or damage to the product.
ALL ABOUT Uconnect® ACCESS 167 NOTE: Many features of this system are speed dependent. For your own safety, it is not possible to use some of the touchscreen features while the vehicle is in motion. isopropyl alcohol and water solution ratio of 50:50. Be sure to follow the solvent manufacturer’s precautions and directions. • Keep drinks, rain, and other sources of moisture away Disc Drive from your system.
168 ALL ABOUT Uconnect® ACCESS Modifications not expressly approved by the radio Increase the separation between the equipment and remanufacturer could void the user’s authority to operate ceiver. the equipment. Consult the dealer or an experienced radio technician for NOTE: This equipment has been tested and found to help. comply with the limits for a Class B digital device, Safety Information pursuant to Part 15 of the FCC Rules.
ALL ABOUT Uconnect® ACCESS 169 The internal wireless radio operates within guidelines • Multiple devices may be connected at one time. For example, a phone can be paired and connected for found in radio frequency safety standards and recomhands-free calling and texting, while a USB media mendations, which reflect the consensus of the scientific source is connected for audio. However, only one community. The radio manufacturer believes the internal Bluetooth® connection can be used at a time.
170 ALL ABOUT Uconnect® ACCESS • Current audio (AM/FM/SXM/AUX) will continue to • When connecting a second device via USB, that device play when switching to a non-media type App. will have priority and auto play accordingly. A phone that is already paired/connected will still be available • Current audio (AM/FM/SXM/AUX) is muted during for hands-free calling and texting. Assist and 9-1-1 Call.
Uconnect® 8.4A — If Equipped CONTENTS ! Uconnect® 8.4A SYSTEM . . . . . . . . . . . . . . . . .173 ▫ Bluetooth® Mode . . . . . . . . . . . . . . . . . . . . .193 ! RADIO MODE . . . . . . . . . . . . . . . . . . . . . . . . .174 ! Uconnect® PHONE . . . . . . . . . . . . . . . . . . . . .195 ▫ Setting Presets . . . . . . . . . . . . . . . . . . . . . . . .177 ▫ Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .195 ▫ SiriusXM Satellite Radio Mode — If Equipped . .178 ▫ Operation . . . . . . .
172 Uconnect® 8.4A — If Equipped ! NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . .224 ▫ Information. . . . . . . . . . . . . . . . . . . . . . . . . .272 ▫ Navigation Registration (Uconnect® 8.4A Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224 ▫ Emergency . . . . . . . . . . . . . . . . . . . . . . . . . .275 ▫ Getting Started . . . . . . . . . . . . . . . . . . . . . . .224 ▫ Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . .225 ▫ Where To?. . . . . . . . .
Uconnect® 8.4A — If Equipped 173 Uconnect® 8.4A SYSTEM 2. Media Press the “Media” button on the touchscreen to access media sources such as: Disc, USB Device and AUX as long as the requested media is present. 3. Controls Press the “Controls” button on the touchscreen to customize settings for heated seat and heated steering wheel. Also provides access to the “Settings” screen. 4. Climate Refer to Climate Controls in your vehicles Owner’s Manual for further details. 1. Radio 5.
174 Uconnect® 8.4A — If Equipped 6. Phone 10. SCREEN OFF Press the “Phone” button on the touchscreen to access the Push the SCREEN OFF button to turn the touchscreen Uconnect® Phone feature. OFF. To turn the screen back ON, just press the screen. 7. Apps 11. VOLUME/MUTE Press the “Apps” button on the touchscreen to access Rotate the rotary knob to adjust the Volume. Push the Smartphone and Connected vehicle options. VOLUME/MUTE button to mute the system. 8.
Uconnect® 8.4A — If Equipped 175 VOLUME/MUTE Control Screen Close Push the VOLUME/MUTE control knob to mute the The “X” button on touchscreen, located at the top right, radio. Push the VOLUME/MUTE control knob a second provides a means to close the Direct Tune Screen. The time to unmute the radio. Direct Tune Screen also auto closes if no activity occurs within 10 seconds. The electronic volume control turns continuously (360 degrees) in either direction, without stopping.
176 Uconnect® 8.4A — If Equipped radio reaches the starting station after passing through Fast Seek Down the entire band two times, the radio will stop at the Press and hold the “Seek Down” button on the station where it began. touchscreen to advance the radio through the availFast Seek Up able stations or channel at a faster rate, the radio stops at the next available station or channel when the Press and hold the “Seek Up” button on the touchbutton on the touchscreen is released.
Uconnect® 8.4A — If Equipped 177 When you are receiving a station that you wish to commit into memory, press and hold the desired numYou can backspace an entry by pressing the “Undo” bered button on the touchscreen for more that two button on touchscreen. seconds or until you hear a confirmation beep.
178 Uconnect® 8.4A — If Equipped Scrolling Preset List Return To Main Radio Screen Once in the Browse Presets screen, you can scroll the You can return to the Main Radio Screen, by pressing the preset list by rotation of the TUNE/SCROLL knob, or by “X” button on the touchscreen when in the Browse pressing the “Up and Down” arrow keys, located on the Presets screen. right of the screen.
Uconnect® 8.4A — If Equipped 179 Latino, offering 20 channels of commercial free music, related marks and logos are trademarks of Sirius XM news, talk, comedy, sports and more dedicated to Span- Radio Inc. Service available in Canada; see www.siriusxm.ca. ish language programming. Go to siriusxm.com/getallaccess for more information. SiriusXM services require subscriptions, sold separately after the 12-month trial included with your new vehicle purchase.
180 Uconnect® 8.4A — If Equipped • The SiriusXM function buttons on the touchscreens are displayed below the Program Information. To activate the SiriusXM Satellite Radio subscription, call 1-800-643-2112 for U.S. residents and 1-877-438-9677 for Tuning is done by operating the TUNE/SCROLL knob or Canadian residents. You will need to provide the Sirius by Direct Tune, similar to other Radio Bands, see Presets, ID (RID) located at the bottom of the Channel 0 screen. Browse, TUNE/SCROLL knob and Direct Tune.
Uconnect® 8.4A — If Equipped 181 You can exit by pressing the “Replay” button on the of the content can only be done when the content is touchscreen, any time during the Replay mode. previously rewound, and therefore, can not be done for live content. A continuous press of the “FW” button on Play/Pause the touchscreen also forwards the content.
182 Uconnect® 8.4A — If Equipped The favorites feature enables you to set a favorite artist, or song that is currently playing. The Radio then uses this information to alert you when either the favorite song, or favorite artist are being played at any time by any of the SiriusXM Channels. This Screen contains many sub menus. You can exit a sub menu to return to a parent menu by pressing the “Back Arrow.” All Press the “All” button at the left of the Browse Screen.
Uconnect® 8.4A — If Equipped 183 Presets Deleting A Preset Press the “Presets” button located at the left of the A Preset can be deleted in the Presets Browse screen by Browse screen. pressing the “Trash Can” Icon for the corresponding Preset. You can scroll the Presets list pressing the up and down arrows located at the right side of the screen. Scrolling Favorites can also be done by operating the TUNE/SCROLL Knob Press the “Favorites” button located at the left of the as well. Browse screen.
184 Uconnect® 8.4A — If Equipped Remove Favorites On Air Press the “Remove Favorites” tab at the top of the screen. Press the “Delete All” button on the touchscreen to delete all of the Favorites or press the “Trash Can” icon next to the Favorite to be deleted. Press the “On-Air” tab at the top of the screen. The On-Air list provides a list of Channels currently airing any of the items in the Selections list, and pressing any of the items in the list tunes the radio to that channel.
Uconnect® 8.4A — If Equipped 185 Alert Settings Balance/Fade Press the “Alert Setting” tab at the top of the screen. The Alert Settings menu allows you to choose from “Alert me to on-air games upon start” or “Alert upon score update” or both when one or more of your selections is airing on any of the SiriusXM channels. 3 Audio Press of the “Audio” button on the touchscreen to activate the Audio settings screen to adjust Balance\Fade, Equalizer, and Speed Adjusted Volume.
186 Uconnect® 8.4A — If Equipped Equalizer Speed Adjusted Volume Press the “Equalizer” button on the touchscreen to acti- Press the “Speed Adjusted Volume” button on the touchvate the Equalizer screen. screen to activate the Speed Adjusted Volume screen. Press the “+” or “–” buttons, or by pressing and dragging The Speed Adjusted Volume is adjusted by pressing of over the level bar for each of the equalizer bands.
Uconnect® 8.4A — If Equipped 187 the audio volume with variation to vehicle speed. Vol- A “Insert Disc” message will be displayed on the screen ume increases automatically as speed increase to com- in the Disc mode when a Disc is not present in the Radio. pensate for normal road noise. Seek Up /Seek Down Surround Sound (If Equipped) Press and release the Seek Up button on the touch- Press the “On” button on the touchscreen to activate screen for the next selection on the Disc.
188 Uconnect® 8.4A — If Equipped shows items and it’s sub-functions, which can be scrolled Info by pressing the “Up” and “Down” buttons to the right. Press the “Info” button on the touchscreen to display the The TUNE/SCROLL knob can also be used to scroll. current track information. Press the “Info” button on the Media Mode touchscreen a second time to cancel this feature. Press the “Media” button on the touchscreen to select the Tracks desired audio source: Disc.
Uconnect® 8.4A — If Equipped 189 USB/iPod® Mode contents of the USB device/iPod®. If supported by the device, you can browse by Folders, Artists, Playlists, Overview Albums, Songs, etc. Press the desired button on the left USB/iPod® Mode is entered by either inserting a USB side of the screen. The center of the browse window device or iPod® and cable into the USB Port or press the shows items and it’s sub-functions, which can be scrolled “iPod®” button on the left side of the display.
190 Uconnect® 8.4A — If Equipped the line above and below the track name) and then push Press the “Shuffle” button on the touchscreen to play the the ENTER/BROWSE knob to start playing that track. selections on the USB/iPod® device in random order to Pressing the “trks” button on the touchscreen while the provide an interesting change of pace. Press the “Shuffle” pop up is displayed will close the pop up. button on the touchscreen a second time to turn this Audio feature off.
Uconnect® 8.4A — If Equipped 191 ON and the radio ON, the unit will switch to AUX mode Audio and begin to play when you insert the device cable. Refer to Radio Mode for adjusting the audio settings. Controlling The Auxiliary Device SD Card Mode — If Equipped The control of the auxiliary device (e.g., selecting playOverview lists, play, fast forward, etc.) cannot be provided by the radio; use the device controls instead.
192 Uconnect® 8.4A — If Equipped Browse Repeat Press the “Browse” button on the touchscreen to display the browse window. The left side of the browse window displays a list of ways you can browse through the contents of the SD Card. If supported by the device, you can browse by Folders, Artists, Playlists, Albums, Songs, etc. Press the desired button on the left side of the screen.
Uconnect® 8.4A — If Equipped 193 Tracks Audio Press the “trks” button on the touchscreen to display a pop up with the Song List. The currently playing song is indicated by an arrow and lines above and below the song title. When in the Tracks List screen you can rotate the TUNE/SCROLL knob to highlight a track (indicated by the line above and below the track name) and then push the ENTER/BROWSE knob to start playing that track. Refer to Radio Mode for adjusting the audio settings.
194 Uconnect® 8.4A — If Equipped To access Bluetooth® mode, press the “Bluetooth®” current selection, or return to the beginning of the previous selection if the Bluetooth® device is within button on the left side of the display. the first second of the current selection. Source Press the “Select Source” button on the touchscreen to select the desired audio source, USB/iPod®, SD Card, AUX or Bluetooth®.
Uconnect® 8.4A — If Equipped 195 Audio Refer to Radio Mode for adjusting the audio settings. Uconnect® PHONE Overview • Hands-Free Text Message Reply. (Forward one of 18 pre-defined SMS messages to incoming calls/text messages). • Redialing last dialed numbers (“Redial”). • Calling Back the last incoming call number (“Call Back”). Uconnect® Phone is a voice-activated, hands-free, invehicle communications system.
196 Uconnect® 8.4A — If Equipped Screen Activated Features • Dialing via Keypad using touchscreen. Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect® Phone. • Viewing and Calling contacts from Phonebooks disFor Uconnect® customer support: played on the touchscreen. • U.S. residents - visit UconnectPhone.
Uconnect® 8.4A — If Equipped 197 WARNING! Uconnect® Phone Button The Uconnect® Phone button on your steering wheel is used to get into the phone mode and make calls, show recent, incoming, outgoing calls, view phonebook etc., When you press the button you will hear a BEEP. The beep is your signal to give a command. The Uconnect® Phone is driven through your Bluetooth® “Hands-Free Profile” mobile phone.
198 Uconnect® 8.4A — If Equipped The Uconnect® Phone is fully integrated with the vehi- • Prior to giving a voice command, one must wait for the beep, which follows the “Listen” prompt or another cle’s audio system. The volume of the Uconnect® Phone prompt. can be adjusted either from the radio volume control knob or from the steering wheel radio control (right • For certain operations, compound commands can be switch), if so equipped. used.
Uconnect® 8.4A — If Equipped 199 works best when you talk in a normal conversational do you want to call?” in the case where a phone call was tone, as if speaking to someone sitting a few feet/ requested but the specific name was not recognized. meters away from you.
200 Uconnect® 8.4A — If Equipped Cancel Command At any prompt, after the beep, you can say “Cancel” and you will be returned to the main menu. or Voice Command You can also push the Phone button on your steering wheel when the system is listening for a command and be returned to the main or previous menu. Pair (Link) Uconnect® Phone To A Mobile Phone To begin using your Uconnect® Phone, you must pair your compatible Bluetooth® enabled mobile phone.
Uconnect® 8.4A — If Equipped 201 1. Place the ignition in the ACC or ON position 2. Press the “Phone” button in the Menu Bar on the touchscreen. • If there is no phones currently connected with the system, a pop-up will appear asking if you would like to pair a mobile phone. 3. Select “Yes” to begin the pairing process. 5. If No is selected, and you still would like to pair a mobile phone, press the “Settings” button from the Uconnect® Phone main screen.
202 Uconnect® 8.4A — If Equipped 9. When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite phone. Selecting “Yes” will make this phone the highest priority. This phone will take precedence over other paired phones within range and will connect to the Uconnect® system automatically when entering the vehicle. Only one mobile phone and/or one Bluetooth® audio device can be connected to the Uconnect® system at a time.
Uconnect® 8.4A — If Equipped 203 Pair Additional Mobile Phones 3. Press the “Add Device” button on the touchscreen, 1. Press the “Settings” button on the touchscreen from 4. Search for available devices on your Bluetooth® enthe Phone main screen, abled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect® 2. Next, press the “Phone/Bluetooth®” button on the screen, touchscreen, 5. Uconnect® Phone will display an in process screen while the system is connecting, 6.
204 Uconnect® 8.4A — If Equipped You can also use the following VR commands to bring up 6. Uconnect® Phone will display an in process screen while the system is connecting, the Paired Phone screen from any screen on the radio: • “Show Paired Phones” or • “Connect My Phone” Pair A Bluetooth® Streaming Audio Device 1. Press the “Media” button on the touchscreen to begin, 7. When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite device.
Uconnect® 8.4A — If Equipped 205 Connecting To A Particular Mobile Phone Or Audio Device After Pairing 2. Press the “Paired Phones” or “Paired Audio Devices” button on the touchscreen. Uconnect® Phone will automatically connect to the high- 3. Press the settings icon button located to the right of the est priority paired phone and/or Audio Device within device name. range. If you need to choose a particular phone or Audio 4. The options pop-up will be displayed. Device follow these steps: 5.
206 Uconnect® 8.4A — If Equipped 4. The options pop-up will be displayed. 5. Press the “Delete Device” button on the touchscreen. Phonebook Download (Automatic Phonebook Transfer From Mobile Phone) — If Equipped If equipped and specifically supported by your phone, Uconnect® Phone automatically downloads names (text names) and number entries from the mobile phone’s Making A Phone Or Audio Device A Favorite phonebook. Specific Bluetooth® Phones with Phone 1. Press the “Settings” button on the touchscreen.
Uconnect® 8.4A — If Equipped 207 • A maximum of 5,000 contact names with four numbers Managing Your Favorites per contact will be downloaded and updated every There are three ways you can add an entry to your time a phone is connected to the Uconnect® Phone. Favorites. • Depending on the maximum number of entries down- 1.
208 Uconnect® 8.4A — If Equipped 3. From the Phone main screen, select phonebook. From the phonebook screen, select the “Favorites” button on the touchscreen and then select the settings icon button on the touchscreen located to the right of the phonebook record. Select an empty entry and press the settings icon on that selected entry. When the Options pop-up appears, press “Add from Mobile.” You will then be asked which contact and number to choose from your mobile phonebook.
Uconnect® 8.4A — If Equipped 209 2. After the “Listening” prompt and the following beep, say “Dial 151-1234-5555.” Listed below are all the ways you can initiate a phone call with Uconnect® Phone. 3. The Uconnect® Phone will dial the number 151-1234-5555. • Redial Ways To Initiate A Phone Call • Dial by pressing in the number • Voice Commands (Dial by Saying a Name, Call by Saying a Phonebook Name, Redial or Call Back) Call By Saying A Phonebook Name 1. Push the Phone begin.
210 Uconnect® 8.4A — If Equipped Call Controls Touch-Tone Number Entry The touchscreen allows you to control the following call 1. features: 2. • Answer 3. • End 4. • Ignore • Hold/unhold • Mute/unmute • Transfer the call to/from the phone • Swap two active calls • Join two active calls together Press the “Phone” button on the touchscreen. Press the “Dial” button on the touchscreen. The Touch-Tone screen will be displayed.
Uconnect® 8.4A — If Equipped 211 Recent Calls Answer Or Ignore An Incoming Call — No Call You may browse up to 31 of the most recent of each of the Currently In Progress When you receive a call on your mobile phone, the following call types: Uconnect® Phone will interrupt the vehicle audio sys• All Calls button on the steering wheel to tem. Push the Phone accept the call. You can also press the “answer” button • Incoming Calls on the touchscreen or press the caller ID box.
212 Uconnect® 8.4A — If Equipped NOTE: The Uconnect® Phone compatible phones in the market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can only answer an incoming call or ignore it. Toggling Between Calls Making A Second Call While Current Call Is In Progress button to toggle beYou can also push the Phone tween the active and held phone call.
Uconnect® 8.4A — If Equipped 213 Redial Uconnect® Phone Features Press the “Redial” button on the touchscreen, or push the Roadside Assistance/Towing Assistance button and after the “Listening” prompt and Phone If you need roadside/towing assistance: the following beep, say “Redial.” button to begin. 1. Push the Phone The Uconnect® Phone will call the last number that was 2. After the “Listening” prompt and the following beep, dialed from your mobile phone.
214 Uconnect® 8.4A — If Equipped to enter. For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can push the To learn how to access your voice mail, refer to “Working Voice Command button and say, “Send 3 7 4 6 #.” with Automated Systems.
Uconnect® 8.4A — If Equipped 215 command immediately. For example, if a prompt is asking “There are two numbers with the name John. • The first number encountered for that contact will be Say the full name” you could push the Voice Comsent. All other numbers entered for that contact will be mand button and say, “John Smith” to select that ignored. option without having to listen to the rest of the voice • You may not hear all of the tones due to mobile phone prompt. network configurations. This is normal.
216 Uconnect® 8.4A — If Equipped Phone And Network Status Indicators Uconnect® Phone will provide notification to inform you of your phone and network status when you are attempting to make a phone call using Uconnect® Phone. The status is given for network signal strength and phone battery strength. Dialing Using The Mobile Phone Keypad WARNING! Driving while distracted can result in loss of vehicle control, accident and injury.
Uconnect® 8.4A — If Equipped 217 NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect® Phone to play it on the vehicle audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio. without terminating the call.
218 Uconnect® 8.4A — If Equipped • Always wait for the beep before speaking. Even though the system is designed for many languages and accents, the system may not always work for some. • Speak normally, without pausing, just as you would When navigating through an automated system such as speak to a person sitting a few feet/meters away from voice mail, or when sending a page, before speaking the you. digit string, make sure to say “Send.
Uconnect® 8.4A — If Equipped 219 Far End Audio Performance Audio quality is maximized under: • Low-To-Medium Blower Setting • Low-To-Medium Vehicle Speed • Low Road Noise • Smooth Road Surface • Fully Closed Windows • Dry Weather Conditions In a convertible vehicle, system performance may be compromised with the convertible top down. Voice Text Reply WARNING! ALWAYS drive safely and obey all applicable laws. You should only use Uconnect® features when it is safe to do so.
220 Uconnect® 8.4A — If Equipped and Here’s how: Push the “Uconnect® Phone” button wait for the beep, then say “reply.” Uconnect® will give the following prompt: “Please say the message you would like to send.” Wait for the beep and say one of the pre-defined messages. (If you are not sure, you can say “help”). Uconnect® will then read the predefined messages allowed.
Uconnect® 8.4A — If Equipped 221 Voice Texting (Must Be Registered With Uconnect® Access And Have A Current Subscription, U.S. Residents Only) Voice Texting allows you to compose a new text or reply to an incoming text message. Before you attempt to use the Voice Texting feature, check to ensure you have the following: WARNING! 1. A Paired, Bluetooth® enabled phone with the Message Access Profile (MAP). Not all Bluetooth® enabled phones support MAP. Visit UconnectPhone.
222 Uconnect® 8.4A — If Equipped 2. Wait for the beep, 7. Wait for the beep, and then dictate any message up to 140 characters. If you exceed 140 characters, you will hear the following prompt: “Message was too long; your message will be truncated.” 3. Say “Text.” 8. Uconnect® will then repeat the message back to you. To Send A Text Message: 1. Push the Uconnect® Phone button, 4. Uconnect® will prompt you “Say the phone number, 9.
Uconnect® 8.
224 Uconnect® 8.4A — If Equipped Bluetooth® Communication Link • This device may not cause harmful interference. Mobile phones have been found to lose connection to the • This device must accept any interference received, Uconnect® Phone. When this happens, the connection including interference that may cause undesired opcan generally be re-established by switching the mobile eration. phone OFF/ON. Your mobile phone is recommended to NAVIGATION remain in Bluetooth® ON mode.
Uconnect® 8.4A — If Equipped 225 Main Menu • Press “Where To?” to find or route to a destination. • Press “View Map” to view the map. • Press “Information” to view Traffic, Where Am I? and Trip Computer information. • Press “Emergency” to search for Hospitals, Police and Fire Stations near your current location. You can also display your current location and save any Emergency facility location to your Favorites. • Press “Stop” to stop a route. • Press “Detour” to detour a route.
226 Uconnect® 8.4A — If Equipped Where To? Address Press this button on the touchscreen to search by a street address or a street name with house number. Recent Press this button on the touchscreen to access previously routed addresses or locations. Point of Interest Press this button on the touchscreen when you want to route to a point of interest. The Point of Interest database allows you to select a destination from a list of locations and public places, or points of interest (POI).
Uconnect® 8.4A — If Equipped 227 Intersection Point on Map Press this button on the touchscreen to enter in two street Press this button on the touchscreen to select a destinanames as a destination. tion directly from the Map screen. By selecting a street segment or icon, you can quickly enter a destination Go Home without the need to input the city name or street. Press this button on the touchscreen to program or City Center confirm a route to the saved home address.
228 Uconnect® 8.4A — If Equipped Closest City Where To? — Address Press this button on the touchscreen to route to a nearby To enter a destination by Address, follow these steps: city. The screen will display an alphabetical listing of 1. While in the Nav Main Menu, press the “Where To?” nearby cities. The navigation system will calculate a route button on the touchscreen, then press the “Address” with the destination at the center of the nearby city. button on the touchscreen.
Uconnect® 8.4A — If Equipped 229 2. Press “Spell City” or “Spell Street” to begin entering the address of your destination. If you press “Spell Street,” you will have to enter and select/press the desired street name in the correct city and then you will have to enter the house number. To change the state and/or country, press the “state, country” button on the touchscreen and follow the prompts to change the state and/or country.
230 Uconnect® 8.4A — If Equipped Once the correct City, Street and Number has been If you are currently on a route guidance and you select entered, you will be asked to confirm your destination Recent, the system will ask you to choose one of the by pressing “OK.” following: 3. Press the “Yes” button on the touchscreen to confirm • Cancel previous route your destination and begin your route.
Uconnect® 8.4A — If Equipped 231 Where To? — Recent To route to a Recent destination, follow these steps: 2. Press the button on the touchscreen with the name of the desired destination. 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Recent” button on the touchscreen. 3 3. Confirm the route with “Yes” to start the route guidance.
232 Uconnect® 8.4A — If Equipped To delete a destination from the list, press the “Trash The following Options are available for each destination: Can Icon” button on the touchscreen. • Edit Name To display the options for a destination press the • Add Phone Number “Options” button on the touchscreen that looks like a gear.
Uconnect® 8.4A — If Equipped 233 • Hotels/Motels • ATM/Banking • All POIs • Spell POI Name The Point of Interest database allows you to select a destination from a list of locations and public places, or points of interest (POI)s.
234 Uconnect® 8.4A — If Equipped You can also change your POI search area, by pressing the “Change Search Area” button on the touchscreen. You will have the following options to change your search area: • Around Me • In a City • Near Destination (only available during route guidance) • Along Route (only available during route guidance) NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
Uconnect® 8.4A — If Equipped 235 POI — Gas Stations 2. Press the “Gas Stations” button on the touchscreen. To select a Gas Station POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen.
236 Uconnect® 8.4A — If Equipped You can search for a gas station by the following categories, which are button tabs at the top of the screen. • Name • Distance • Type • ABC (Search) 3. Press the desired Gas Station and press “Yes” to confirm the destination.
Uconnect® 8.4A — If Equipped 237 POI — Restaurants 2. Press the “Restaurants” button on the touchscreen. To select a Restaurant POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen. 3 You can search for a restaurants by the following categories, which are button tabs at the top of the screen.
238 Uconnect® 8.4A — If Equipped 3. Press the desired Restaurant and press “Yes” to con- POI — Hotels/Motels firm the destination. To select a Hotel or Motel POI, follow these steps: If you are currently on a route guidance and you select a Restaurant, the system will ask you to choose one of the 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, press the “Point of Interest” following: button on the touchscreen.
Uconnect® 8.4A — If Equipped 239 2. Press the “Hotels/Motels” button on the touchscreen. • Type • ABC (Search) 3. Press the desired hotel or motel and press “Yes” to confirm the destination.
240 Uconnect® 8.4A — If Equipped POI — ATM/Banking To select a ATM or Bank POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen. 2. Press the “ATM/Banking” button on the touchscreen. You can search for an ATM or Bank by the following categories, which are button tabs at the top of the screen.
Uconnect® 8.4A — If Equipped 241 3. Press the desired ATM or Bank and press “Yes” to All POIs confirm the destination. To select a POI type, follow these steps: If you are currently on a route guidance and you select an 1. While in the Nav Main Menu, press the “Where To?” ATM or Bank POI, the system will ask you to choose one button on the touchscreen, then press the “Point of of the following: Interest” button on the touchscreen.
242 Uconnect® 8.4A — If Equipped 2. Press “All POIs” button on the touchscreen. You can search through the available POI categories to find your desired POI.
Uconnect® 8.4A — If Equipped 243 4. Press the desired POI and press “Yes” to confirm the destination. If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” 3. Select a category and then select a subcategory if button on the touchscreen to exit. necessary.
244 Uconnect® 8.4A — If Equipped POI — Spell Name 2. Press the “Spell Name” button on the touchscreen. To select for a specific POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen. 3. A keyboard will appear on the screen. Type in the POI that you want to search and press the “List” button on the touchscreen to display available items. 4.
Uconnect® 8.4A — If Equipped 245 If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route 3 • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Where To? — Favorite Destinations To route to a Favorite destination, follow these steps: 1.
246 Uconnect® 8.4A — If Equipped 3. To delete a destination from the list, press the “Trash If you are currently on a route guidance and you select a Can Icon” button on the touchscreen. Favorite, the system will ask you to choose one of the following: 4. To save a favorite destination, press the “Add Favorite” button on the touchscreen and follow the steps to • Cancel previous route route a destination. • Add as first destination 5.
Uconnect® 8.4A — If Equipped 247 2. Press the “Spell Intersection” button on the touchscreen. To enter a destination by Intersection, follow these steps: Where To? — Intersection 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Intersection” button on the touchscreen. 3 This menu shows the default country and state setting.
248 Uconnect® 8.4A — If Equipped 3. If you press “Spell City,” enter and press the desired 4. Once the correct City and Intersection has been encity name, followed by the desired street name, then tered, you will be asked to confirm your destination. enter the intersection street. 5. Press the “Yes” button on the touchscreen to confirm If you press “Spell Street,” enter and press the desired your destination and begin your route.
Uconnect® 8.4A — If Equipped 249 Where To? — Go Home To enter your Home Address, follow these steps: If there is no Home Address entered, press “Yes” to enter it now. 2. To set your set your Home Address choose one of the 1. While in the Nav Main Menu, press the “Where To?” following options: button on the touchscreen then press the “Go Home” button on the touchscreen. NOTE: Refer to the individual section of the chosen option for further information.
250 Uconnect® 8.4A — If Equipped Once you have generated your Home Address, you will 2. Press the “Options” button at the bottom of the be asked to Save it. displayed map. 3. Press the “Save” button on the touchscreen to confirm 3. Press “Clear Home” and then press “Yes” to clear/ your destination and begin the route to your Home delete your Home Address. Address. 4. To enter in a new Home Address, follow the Where 4. This address will be saved as your Home Address and To? – Go Home procedure.
Uconnect® 8.4A — If Equipped 251 Where To? — Trips 2. Press the “Trips” button on the touchscreen. To route to a saved Trip, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “Recent” button on the touchscreen. 3 3. Press the button on the touchscreen with the name of the desired Trip and press the first destination in the list. 4. Confirm the route by pressing “Yes” to start the route guidance.
252 Uconnect® 8.4A — If Equipped To add a Trip, follow these steps: • Phone Number 1. Press the “Create new Trip” button on the touchscreen. NOTE: Refer to the individual section of the chosen option for further information. 2. Type in the new Trip Name. 5. Add more needed destinations to your trip. 3. Press “Add Destination” to add destinations to your trip. NOTE: Each destination will be listed in order, with the last destination being the final destination. 4.
Uconnect® 8.4A — If Equipped 253 • Move Down in the list NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. 3 Where To? — GEO Coordinate To route to a saved Trip, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “GEO Coordinate” button on the touchscreen. 2. Enter the Latitude by typing in the numbers.
254 Uconnect® 8.4A — If Equipped 5. Press “OK” to confirm the destination. 6. Press the “Yes” button on the touchscreen to confirm your destination and begin your route.
Uconnect® 8.4A — If Equipped 255 2. Use the touchscreen to drag the center of the cross over the desired destination. To enter a destination by Point on Map, follow these steps: Where To? — Point on Map 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “Point on Map” button on the touchscreen. 3 3.
256 Uconnect® 8.4A — If Equipped 4. Press the “Yes” button on the touchscreen to confirm Where To? — City Center your destination and begin your route. To enter a destination by City Center, follow these steps: If you are currently on a route guidance and you select a 1. While in the Nav Main Menu, press the “Where To?” Point on Map, the system will ask you to choose one of button on the touchscreen then press the “City Center” the following: button on the touchscreen.
Uconnect® 8.4A — If Equipped 257 If you are currently on a route guidance and you select a City Center, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. 3. Press the desired city from the list. Where To? — Closest City To enter a destination by Closest City, follow these steps: 4.
258 Uconnect® 8.4A — If Equipped 2. Press the desired city from the list. 3. Press the “Yes” button on the touchscreen to confirm your destination and begin your route.
Uconnect® 8.4A — If Equipped 259 If you are currently on a route guidance and you select a Closest City, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Where To? — Trails 2. Press “Start Trail Recording.” When starting to drive a trail you want to record, follow 3.
260 Uconnect® 8.4A — If Equipped 2. Enter the Phone Number of the destination you would like to route to. To enter a destination by Phone number, follow these steps: 3. Press the desired destination from the list. Where To? — Phone 1. While in the Nav Main Menu, press the “Where To?” 4. Press the “Yes” button on the touchscreen to confirm button on the touchscreen then press the “Phone your destination and begin your route. Number” button on the touchscreen.
Uconnect® 8.4A — If Equipped 261 Before Route Guidance Before confirming the route with the “Yes” button on the touchscreen, it is possible to select options different from the default route settings. • Options – Press the “Options” button on the touchscreen to display a list of options to alter your route. To make a selection press and release the desired setting until a check-mark appears. 3 • Avoid – Press the “Avoid” button on the touchscreen to choose road types to avoid during your route.
262 Uconnect® 8.4A — If Equipped • Save – Press the “Save” button on the touchscreen to save the destination as a Favorite. Press the “Yes” button on the touchscreen to confirm your destination and to start your route guidance. NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
Uconnect® 8.4A — If Equipped 263 Zoom In +/ Zoom Out – Press the Zoom In (+) or Zoom Out (–) buttons on the touchscreen to change the zoom level. Roads with lower functional classification are not shown in higher zoom levels. (E.g. residential streets, lightly-traveled county roads.) Time of Arrival/Time to Destination/Distance (only during route guidance) Press the button on the touchscreen in the upper right area to the display items available. Press the desired option button on the touchscreen.
264 Uconnect® 8.4A — If Equipped • Settings Press the area in the upper center part of the screen that Press this button on the touchscreen to view all the displays your next turn to see a Turn List for your current available settings. See View Map – Settings for more information. route. • Repeat Press a turn in the displayed Turn List for the following Press this button on the touchscreen to repeat the current options: voice prompt.
Uconnect® 8.4A — If Equipped 265 Where Am I? Press the area in the lower center part of the screen that displays your current location to view the Where Am I? view. Where Am I? displays the address and GEO Coordinates of your current location. 3 • Press the “GPS” button on the touchscreen to view the GPS information. • Press the “Save” button on the touchscreen to save the location in your Favorites.
266 Uconnect® 8.4A — If Equipped View Map — Settings The following Map Settings are available: • Map Setup — Press this button on the touchscreen to display items to customize how your map is viewed. Settings – Map Setup for more information. • Speed Limit — Press this button on the touchscreen to turn on/off speed limit warning announcements and to enter a pre-defined speed limit for your route. • Guidance Options — Press this button on the touchscreen to display items to customize your route guidance.
Uconnect® 8.4A — If Equipped 267 • GPS — Press this button on the touchscreen to change the GPS display. Press the desired button on the touchscreen. • Decimal • DMS • DM Copy device information to USB? (If Equipped) — Press this button on the touchscreen to copy your radio information to a USB jump drive through the available USB port.
268 Uconnect® 8.4A — If Equipped • Current Street Press this button on the touchscreen to turn on/off the current street display on the lower center of the Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected. • AutoZoom Press this button on the touchscreen to change how the AutoZoom feature adjust the zoom level during guidance in Map View. Press the desired button on the touchscreen.
Uconnect® 8.4A — If Equipped 269 • Show POI Icons • Park Areas • POI Icon List • Railroads Press this button on the touchscreen to show the selected Point of Interest icons while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected. Press this button on the touchscreen to display the available Point of Interest icons you would like displayed while in Map View.
270 Uconnect® 8.4A — If Equipped • River Names Press this button on the touchscreen to display River Names while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected. The following Guidance options are available. • Play Voice Guidance Prompts Press this button on the touchscreen to enable Voice Guidance Prompts during route guidance.
Uconnect® 8.4A — If Equipped 271 • Junction View Press this button on the touchscreen to enable Junction View during route guidance. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected. • Navigation Turn-by-Turn Displayed In Cluster Automatic By Delay Time Manual Off • TMC Avoidance Types (IF Equipped) Press this button on the touchscreen to enable navigation turn-by-turn displayed in vehicles cluster during route guidance.
272 Uconnect® 8.4A — If Equipped NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Information From the Nav Main Menu, press the “Information” button on the touchscreen and select one of the following options to view additional information.
Uconnect® 8.4A — If Equipped 273 Information — Where Am I? To select “Where Am I?” information, follow these steps: 1. While in the Nav Main Menu, press the “Information” button on the touchscreen. 3 Where Am I? displays the address and GEO Coordinates of your current location. 3. Press the “GPS” button on the touchscreen to view the GPS information. 2. Press the “Where Am I?” button on the touchscreen. 4. Press the “Save” button on the touchscreen to save the location in your Favorites.
274 Uconnect® 8.4A — If Equipped NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Information — Trip Computer To select “Trip Computer” information, follow these steps: 1. While in the Nav Main Menu, press the “Information” button on the touchscreen. 2. Press the “Trip Computer” button on the touchscreen.
Uconnect® 8.4A — If Equipped 275 • Moving average speed • Maximum speed reached • Total time traveled • Travel time spent moving • Travel time spent stopped NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the ‘X’ button on the touchscreen to exit.
276 Uconnect® 8.4A — If Equipped • Fire Department – Search and route a Fire Department Press the “Location” button on the touchscreen to display close to your current location your exact current location. Press the “Save” button on the touchscreen to save your current location in Favorites. NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
Uconnect® 8.4A — If Equipped 277 Emergency — Hospital 2. Press the “Hospital” button on the touchscreen. To search for a Hospital close to your current location, follow these steps: 1. While in the Nav Main Menu, press the “Emergency” button on the touchscreen. 3 You can search for a Hospital by the following categories, which are button tabs at the top of the screen.
278 Uconnect® 8.4A — If Equipped NOTE: In case of emergency, please contact the facility to Emergency — Police verify their availability before proceeding. To search for a Police Station close to your current 3. Press the desired Hospital and press “Yes” to confirm location, follow these steps: the destination. 1.
Uconnect® 8.4A — If Equipped 279 2. Press the “Police” button on the touchscreen. NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. 3. Press the desired Police Station and press “Yes” to confirm the destination.
280 Uconnect® 8.4A — If Equipped 2. Press the “Fire Department” button on the touchscreen. To search for a Fire Departmentclose to your current location, follow these steps: Emergency — Fire Department 1. While in the Nav Main Menu, press the “Emergency” button on the touchscreen.
Uconnect® 8.4A — If Equipped 281 You can search for a Fire Department by the following categories, which are button tabs at the top of the screen. • Name • Distance • ABC (Search) NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
282 Uconnect® 8.4A — If Equipped costs, you are responsible for them. If Roadside Assistance is provided to your vehicle, you agree to be responsible for any additional roadside assistance service costs that you may incur. 9-1-1 Call — If Equipped The 9-1-1 Call system is an embedded phone system that allows you to connect to a 9-1-1 operator in an emergency.
Uconnect® 8.4A — If Equipped 283 2. The LED light on the Rearview Mirror will turn green NOTE: Once a connection is made between the vehicle’s once a connection to a 9-1-1 operator has been made; 9-1-1 Call system and the 9-1-1 operator, the 9-1-1 operator may be able to open a voice connection with the 3. Once a connection between the vehicle and a 9-1-1 vehicle to determine if additional help is needed.
284 Uconnect® 8.4A — If Equipped 6. If a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit certain vehicle information to a 9-1-1 operator, including the last known GPS coordinates of your vehicle. If a connection is made between a 9-1-1 operator and your vehicle, you understand and agree that 9-1-1 operators may record conversations and sounds in your car upon connection and consent to such recordings.
Uconnect® 8.4A — If Equipped 285 9-1-1 Call System Limitations Vehicles sold in Canada and Mexico DO NOT have 9-1-1 Call system capabilities. 9-1-1 or other emergency line operators in Canada and Mexico may not answer or respond to 9-1-1 system calls. If the 9-1-1 Call system detects a malfunction, any of the following may occur at the time the malfunction is detected, and at the beginning of each ignition cycle: • The Rearview Mirror light will continuously be illuminated red.
286 Uconnect® 8.4A — If Equipped Even if the 9-1-1 Call system is fully functional, factors • Operator error by the 9-1-1 operator. beyond Chrysler Group LLC’s control may prevent or • Wireless network congestion. stop 9-1-1 Call system operation. These include, but are not limited to, the following factors: • Weather. • The ignition key has been removed from the ignition • Buildings, structures, geographic terrain, or tunnels. and the delayed accessories mode is active.
Uconnect® 8.4A — If Equipped 287 WARNING! Failure to perform scheduled maintenance and regularly inspect your vehicle may result in vehicle damage and/or serious injury. General Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Uconnect® 8.4AN — If Equipped CONTENTS ! Uconnect® 8.4AN SYSTEM . . . . . . . . . . . . . . . .291 ▫ Bluetooth® Mode . . . . . . . . . . . . . . . . . . . . .312 ! RADIO MODE . . . . . . . . . . . . . . . . . . . . . . . . .292 ! Uconnect® PHONE . . . . . . . . . . . . . . . . . . . . .314 ▫ Setting Presets . . . . . . . . . . . . . . . . . . . . . . . .295 ▫ Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .314 ▫ SiriusXM Satellite Radio Mode — If Equipped . .296 ▫ Operation . . . . . . .
290 Uconnect® 8.4AN — If Equipped ▫ Getting Started . . . . . . . . . . . . . . . . . . . . . . .339 ! SiriusXM TRAFFIC — U.S. MARKET ONLY (AVAILABLE ON 8.4AN — IF EQUIPPED) . . . . .398 ▫ Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . .340 ! SiriusXM TRAVEL LINK — U.S. MARKET ONLY ▫ Where To?. . . . . . . . . . . . . . . . . . . . . . . . . . .341 (AVAILABLE ON 8.4AN — IF EQUIPPED) . . . . .399 ▫ View Map . . . . . . . . . . . . . . . . . . . . . . . . . . .377 ! SECURITY FEATURES . . . . . .
Uconnect® 8.4AN — If Equipped 291 Uconnect® 8.4AN SYSTEM 2. Media Press the “Media” button on the touchscreen to access media sources such as: Disc (If Equipped), USB Device, AUX, Bluetooth®, and SD Card (If Equipped) as long as the requested media is present. 3. Controls Press the #Controls# button on the touchscreen to adjust the auto-dimming mirror, heated & vented seats, heated & vented steering wheel (if equipped). 4. Climate 1.
292 Uconnect® 8.4AN — If Equipped 6. Phone 10. SCREEN OFF Press the “Phone” button on the touchscreen to access the Push the SCREEN OFF button to turn the touchscreen Uconnect® Phone feature. OFF. To turn the screen back ON, just press the screen. 7. Apps 11. VOLUME/MUTE Press the “Apps” button on the touchscreen to access Rotate the rotary knob to adjust the Volume. Push the Smartphone and Connected vehicle options. VOLUME/MUTE button to mute the system. 8. ENTER/BROWSE & TUNE/SCROLL 12.
Uconnect® 8.4AN — If Equipped 293 Press the RADIO button on the touchscreen, bottom left corner, to enter the Radio Mode. The different tuner modes; AM, FM, and SXM, can then, be selected by pressing the corresponding buttons in the Radio mode. Turn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the radio station frequency. Push the ENTER/BROWSE button to choose a selection.
294 Uconnect® 8.4AN — If Equipped stations or channels at a faster rate, the radio stops at the next available station or channel when the button The Seek Up and Down functions are activated by on the touchscreen is released. pressing the double arrow buttons on the touchscreen to the right and left of the radio station display, or by Seek Down pressing the left “Steering Wheel Audio Control” (if Press and release the “Seek Down” button on the equipped) up or down.
Uconnect® 8.4AN — If Equipped 295 Direct Tune GO Press the “Tune” button on the touchscreen located at the bottom of the radio screen. The Direct Tune button on the touchscreen is available in AM, FM and SXM radio modes and can be used to direct tune the radio to a desired station or channel. Once the last digit of a station has been entered, the DIRECT TUNE screen will close and the system will automatically tune to that station.
296 Uconnect® 8.4AN — If Equipped You can switch between the two radio presets by pressing When selected, the radio tunes to the station stored in the the “arrow button” located in the upper right of the radio Preset and returns to the main radio screen. touchscreen.
Uconnect® 8.4AN — If Equipped 297 SiriusXM All Access Package • MySXM – allowing you to personalize your favorite music channels All satellite radio equipped vehicles come with a one year trial to the SiriusXM All Access package, providing Go to siriusxm.com/getallaccess for more information over 160 channels of the best programming for all the SiriusXM services require subscriptions, sold separately places life takes you.
298 Uconnect® 8.4AN — If Equipped This functionality is only available for radios equipped Canadian residents. You will need to provide the Siriwith a Satellite receiver. In order to receive satellite radio, usXM ID (RID) located at the bottom of the Channel 0 the vehicle needs to be outside with a clear view to the screen. sky. The Satellite Mode is activated by a press of the “SXM” If the screen shows Acquiring Signal, you might have to button on the touchscreen.
Uconnect® 8.4AN — If Equipped 299 Tuning is done by operating the Tune Knob or by Direct Play/Pause Tune, similar to other Radio Bands, see Presets, browse, Press the “Pause/Play” button on the touchscreen to Tune Knob, and Direct Tune. pause the playing of live or rewound content at any time. In addition to the tuning Operation functions common to Play can be resumed again by pressing of the “Pause/ all Radio modes, the replay, Traffic/Weather Jump, and Play” button on the touchscreen.
300 Uconnect® 8.4AN — If Equipped the touchscreen also forwards the content. The Radio information to alert you when either the favorite song, or begins playing the content at the point at which the press favorite artist are being played at any time by any of the SiriusXM Channels. is release. Live The maximum number of favorites that can be stored in the Radio is 50. Press the “Live” button on the touchscreen to resume Fav. Artist: While the song is playing to set a Favorite playing of Live content.
Uconnect® 8.4AN — If Equipped 301 When the Traffic & Weather button on the touchscreen is Channel List pressed, the Traffic & Weather channel is tuned. Press the Channel List, or Genre, to display all the If the Traffic & Weather alert City is not set, you are SiriusXM Channel Numbers. You can scroll the Channel presented with a pop up to allow you to select the list by pressing the “Up and Down arrows”, located on the right side of the screen.
302 Uconnect® 8.4AN — If Equipped You can scroll the Presets list pressing the up and down Favorites arrows located at the right side of the screen. Scrolling Press the “Favorites” button located at the left of the can also be done by operating the TUNE/SCROLL Knob Browse screen. as well.
Uconnect® 8.4AN — If Equipped 303 Alert Settings Select Teams Press the “Alert Setting” tab at the top of the screen. The Alert Settings menu allows you to choose from a Visual alert or Audible and Visual alert when one of your favorites is airing on any of the SiriusXM channels. Press the “Select Teams” button on the touchscreen to activate the League Scroll list.
304 Uconnect® 8.4AN — If Equipped Audio Balance/Fade Press the “audio” button on the touchscreen to activate the audio settings screen to adjust Balance\Fade, Equalizer and Speed Adjusted Volume. You can return to the Radio screen by pressing the “X” located at the top right. Press the “Balance/Fade” button on the touchscreen to Balance audio between the front speakers or fade the audio between the rear and front speakers.
Uconnect® 8.4AN — If Equipped 305 Equalizer Speed Adjusted Volume 4 Press the “Equalizer” button on the touchscreen to acti- Press the “Speed Adjusted Volume” button on the touchvate the Equalizer screen. screen to activate the Speed Adjusted Volume screen. Press the “+” or “–” buttons on the touchscreen, or by The Speed Adjusted Volume is adjusted by pressing of pressing and dragging over the “Level Bar” for each of the “+ and –” buttons or by pressing and dragging over the equalizer bands.
306 Uconnect® 8.4AN — If Equipped the audio volume with variation to vehicle speed. Vol- A “Insert Disc” message will be displayed on the screen ume increases automatically as speed increase to com- in the Disc mode when a Disc is not present in the Radio. pensate for normal road noise. Seek Up /Seek Down Surround System — If Equipped Press and release the Seek Up button on the touch- Press the “On” button on the touchscreen to activate screen for the next selection on the Disc.
Uconnect® 8.4AN — If Equipped 307 shows items and it’s sub-functions, which can be scrolled Info by pressing the “Up” and “Down” buttons to the right. Press the “Info” button on the touchscreen to display the The TUNE/SCROLL knob can also be used to scroll. current track information. Press the “Info” button on the Media Mode touchscreen a second time to cancel this feature. Press the “Media” button on the touchscreen to select the Tracks desired audio source: Disc.
308 Uconnect® 8.4AN — If Equipped USB/iPod® Mode contents of the USB device/iPod®. If supported by the device, you can browse by Folders, Artists, Playlists, Overview Albums, Songs, etc. Press the desired button on the left USB/iPod® Mode is entered by either inserting a USB side of the screen. The center of the browse window device or iPod® and cable into the USB Port or press the shows items and it’s sub-functions, which can be scrolled “iPod®” button on the left side of the display.
Uconnect® 8.4AN — If Equipped 309 the line above and below the track name) and then push Press the “Shuffle” button on the touchscreen to play the the ENTER/BROWSE knob to start playing that track. selections on the USB/iPod® device in random order to Pressing the “trks” button on the touchscreen while the provide an interesting change of pace. Press the “Shuffle” pop up is displayed will close the pop up. button on the touchscreen a second time to turn this Audio feature off.
310 Uconnect® 8.4AN — If Equipped ON and the radio ON, the unit will switch to AUX mode Audio and begin to play when you insert the device cable. Refer to Radio Mode for adjusting the audio settings. Controlling The Auxiliary Device SD Card Mode — If Equipped The control of the auxiliary device (e.g., selecting playOverview lists, play, fast forward, etc.) cannot be provided by the radio; use the device controls instead.
Uconnect® 8.4AN — If Equipped 311 Browse Repeat Press the “Browse” button on the touchscreen to display the browse window. The left side of the browse window displays a list of ways you can browse through the contents of the SD Card. If supported by the device, you can browse by Folders, Artists, Playlists, Albums, Songs, etc. Press the desired button on the left side of the screen.
312 Uconnect® 8.4AN — If Equipped Tracks Bluetooth® Mode Press the “trks” button on the touchscreen to display a pop up with the Song List. The currently playing song is indicated by an arrow and lines above and below the song title. When in the Tracks List screen you can rotate the TUNE/SCROLL knob to highlight a track (indicated by the line above and below the track name) and then push the ENTER/BROWSE knob to start playing that track.
Uconnect® 8.4AN — If Equipped 313 To access Bluetooth® mode, press the “Bluetooth®” current selection, or return to the beginning of the previous selection if the Bluetooth® device is within button on the left side of the display. the first second of the current selection. Media Mode Press the “Media” button on the touchscreen to select the desired audio source: Bluetooth®.
314 Uconnect® 8.4AN — If Equipped Uconnect® PHONE Overview • Redialing last dialed numbers (“Redial”). • Calling Back the last incoming call number (“Call Back”). Uconnect® Phone is a voice-activated, hands-free, invehicle communications system. Uconnect® Phone al- • View Call logs on screen (“Show incoming calls,” lows you to dial a phone number with your mobile “Show Outgoing calls,” “Show missed Calls,” “Show phone. Recent Calls”).
Uconnect® 8.4AN — If Equipped 315 Screen Activated Features • Dialing via Keypad using touchscreen. Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect® Phone. • Viewing and Calling contacts from Phonebooks disFor Uconnect® customer support: played on the touchscreen. • U.S. residents - visit UconnectPhone.
316 Uconnect® 8.4AN — If Equipped WARNING! Uconnect® Phone Button The Uconnect® Phone button on your steering wheel is used to get into the phone mode and make calls, show recent, incoming, outgoing calls, view phonebook etc., When you press the button you will hear a BEEP. The beep is your signal to give a command. The Uconnect® Phone is driven through your Bluetooth® “Hands-Free Profile” mobile phone.
Uconnect® 8.4AN — If Equipped 317 The Uconnect® Phone is fully integrated with the vehi- • Prior to giving a voice command, one must wait for the beep, which follows the “Listen” prompt or another cle’s audio system. The volume of the Uconnect® Phone prompt. can be adjusted either from the radio volume control knob or from the steering wheel radio control (right • For certain operations, compound commands can be switch), if so equipped. used.
318 Uconnect® 8.4AN — If Equipped works best when you talk in a normal conversational do you want to call?” in the case where a phone call was tone, as if speaking to someone sitting a few feet/ requested but the specific name was not recognized. meters away from you.
Uconnect® 8.4AN — If Equipped 319 Cancel Command At any prompt, after the beep, you can say “Cancel” and you will be returned to the main menu. or Voice Command You can also push the Phone button on your steering wheel when the system is listening for a command and be returned to the main or previous menu. Pair (Link) Uconnect® Phone To A Mobile Phone To begin using your Uconnect® Phone, you must pair your compatible Bluetooth® enabled mobile phone.
320 Uconnect® 8.4AN — If Equipped 1. Place the ignition in the ACC or ON position 2. Press the “Phone” button in the Menu Bar on the touchscreen. • If there is no phones currently connected with the system, a pop-up will appear asking if you would like to pair a mobile phone. 3. Select “Yes” to begin the pairing process. 5. If No is selected, and you still would like to pair a mobile phone, press the “Settings” button from the Uconnect® Phone main screen.
Uconnect® 8.4AN — If Equipped 321 9. When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite phone. Selecting “Yes” will make this phone the highest priority. This phone will take precedence over other paired phones within range and will connect to the Uconnect® system automatically when entering the vehicle. Only one mobile phone and/or one Bluetooth® audio device can be connected to the Uconnect® system at a time.
322 Uconnect® 8.4AN — If Equipped Pair Additional Mobile Phones 3. Press the “Add Device” button on the touchscreen, 1. Press the “Settings” button on the touchscreen from 4. Search for available devices on your Bluetooth® enthe Phone main screen, abled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect® 2. Next, press the “Phone/Bluetooth®” button on the screen, touchscreen, 5. Uconnect® Phone will display an in process screen while the system is connecting, 6.
Uconnect® 8.4AN — If Equipped 323 You can also use the following VR commands to bring up 6. Uconnect® Phone will display an in process screen while the system is connecting, the Paired Phone screen from any screen on the radio: • “Show Paired Phones” or • “Connect My Phone” Pair A Bluetooth® Streaming Audio Device 1. Press the “Media” button on the touchscreen to begin, 7.
324 Uconnect® 8.4AN — If Equipped Connecting To A Particular Mobile Phone Or Audio Device After Pairing Disconnecting A Phone Or Audio Device 1. Press the “Settings” button on the touchscreen. Uconnect® Phone will automatically connect to the highest priority paired phone and/or Audio Device within 2. Press the “Paired Phones” or “Paired Audio Devices” button on the touchscreen. range. If you need to choose a particular phone or Audio Device follow these steps: 3.
Uconnect® 8.4AN — If Equipped 325 3. Press the “Settings” button located to the right of the 5. Press the “Make Favorite” button on the touchscreen; you will see the chosen device move to the top of the device name for a different Phone or Audio Device list. than the currently connected device. 4. The options pop-up will be displayed. 6. Press the “X” to exit out of the Settings screen. 5. Press the “Delete Device” button on the touchscreen.
326 Uconnect® 8.4AN — If Equipped • Automatic download and update of a phone book, if supported, begins as soon as the Bluetooth® wireless phone connection is made to the Uconnect® Phone, for example, after you start the vehicle. edited on the mobile phone. The changes are transferred and updated to Uconnect® Phone on the next phone connection.
Uconnect® 8.4AN — If Equipped 327 3. From the Phone main screen, select phonebook. From 2. Next select “Favorites” on the left side of the screen and then press the #Settings# button on the touchthe phonebook screen, select the “Favorites” button on screen. the touchscreen and then select the #Settings# button on the touchscreen located to the right of the phone3. Press the #Settings# button next to the Favorite you book record. would like to remove. 4.
328 Uconnect® 8.4AN — If Equipped Ways To Initiate A Phone Call Dial By Saying A Number Listed below are all the ways you can initiate a phone call 1. Push the “Phone” with Uconnect® Phone. to begin. • Redial • Dial by pressing in the number • Voice Commands (Dial by Saying a Name, Call by Saying a Phonebook Name, Redial or Call Back) • Favorites • Mobile Phonebook • Recent Call Log • SMS Message Viewer button on your steering wheel 2.
Uconnect® 8.4AN — If Equipped 329 Call Controls Touch-Tone Number Entry The touchscreen allows you to control the following call 1. features: 2. • Answer 3. • End 4. • Ignore • Hold/unhold • Mute/unmute • Transfer the call to/from the phone • Swap two active calls • Join two active calls together Press the “Phone” button on the touchscreen. Press the “Dial” button on the touchscreen. The Touch-Tone screen will be displayed.
330 Uconnect® 8.4AN — If Equipped Recent Calls Answer Or Ignore An Incoming Call — No Call You may browse up to 31 of the most recent of each of the Currently In Progress When you receive a call on your mobile phone, the following call types: Uconnect® Phone will interrupt the vehicle audio sys• All Calls button on the steering wheel to tem. Push the Phone accept the call. You can also press the “answer” button • Incoming Calls on the touchscreen or press the caller ID box.
Uconnect® 8.4AN — If Equipped 331 NOTE: The Uconnect® Phone compatible phones in the market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can only answer an incoming call or ignore it. Toggling Between Calls If two calls are in progress (one active and one on hold), press the “Swap” button on the Phone main screen. Only one call can be placed on hold at a time.
332 Uconnect® 8.4AN — If Equipped Redial Advanced Phone Connectivity Press the “Redial” button on the touchscreen, or push the Transfer Call To And From Mobile Phone button and after the “Listening” prompt and Phone The Uconnect® Phone allows ongoing calls to be transthe following beep, say “Redial.” ferred from your mobile phone to the Uconnect® Phone The Uconnect® Phone will call the last number that was without terminating the call. To transfer an ongoing call dialed from your mobile phone.
Uconnect® 8.4AN — If Equipped 333 Things You Should Know About Your Uconnect® Phone Voice Command For the best performance: • Low-To-Medium Vehicle Speed • Low Road Noise • Smooth Road Surface • Fully Closed Windows • Adjust the rearview mirror to provide at least ½ inch • Dry Weather Condition (1 cm) gap between the overhead console (if equipped) and the mirror. Even though the system is designed for many languages and accents, the system may not always work for some.
334 Uconnect® 8.4AN — If Equipped Even though international dialing for most number com- Performance such as audio clarity, echo, and loudness to binations is supported, some shortcut dialing number a large degree rely on the phone and network, and not the Uconnect® Phone. combinations may not be supported. Audio quality is maximized under: Echo at the far end can sometimes be reduced by lowering the in-vehicle audio volume.
Uconnect® 8.4AN — If Equipped 335 Once your Uconnect® system is paired with a compatible mobile device, the system can announce a new incoming text message, and read it to you over the vehicle audio system. You can reply to the message using Voice Recognition, by selecting, or saying one of the 18 pre-defined messages. and Here’s how: Push the “Uconnect® Phone” button wait for the beep, then say “reply.” Uconnect® will give the following prompt: “Please say the message you would like to send.
336 Uconnect® 8.4AN — If Equipped Voice Texting (Must Be Registered With Uconnect® Access And Have A Current Subscription, U.S. Residents Only) Voice Texting allows you to compose a new text or reply to an incoming text message. Before you attempt to use the Voice Texting feature, check to ensure you have the following: WARNING! 1. A Paired, Bluetooth® enabled phone with the Message Access Profile (MAP). Not all Bluetooth® enabled phones support MAP. Visit UconnectPhone.
Uconnect® 8.4AN — If Equipped 337 2. Wait for the beep, 7. Wait for the beep, and then dictate any message up to 140 characters. If you exceed 140 characters, you will hear the following prompt: “Message was too long; your message will be truncated.” 3. Say “Text.” 8. Uconnect® will then repeat the message back to you. To Send A Text Message: 1. Push the Uconnect® Phone button, 4. Uconnect® will prompt you “Say the phone number, 9.
338 Uconnect® 8.
Uconnect® 8.4AN — If Equipped 339 • Changes or modifications not expressly approved by the party responsible for compliance could void the Mobile phones have been found to lose connection to the user’s authority to operate the equipment. Uconnect® Phone. When this happens, the connection can generally be re-established by switching the mobile • This device may not cause harmful interference. phone OFF/ON.
340 Uconnect® 8.4AN — If Equipped Main Menu • Press “Where To?” to find or route to a destination. • Press “View Map” to view the map. • Press “Information” to view Traffic, Where Am I? and Trip Computer information. • Press “Emergency” to search for Hospitals, Police and Fire Stations near your current location. You can also display your current location and save any Emergency facility location to your Favorites. • Press “Stop” to stop a route. • Press “Detour” to detour a route.
Uconnect® 8.4AN — If Equipped 341 Where To? Address Press this button on the touchscreen to search by a street address or a street name with house number. Recent Press this button on the touchscreen to access previously routed addresses or locations. Point of Interest Press this button on the touchscreen when you want to route to a point of interest. The Point of Interest database allows you to select a destination from a list of locations and public places, or points of interest (POI).
342 Uconnect® 8.4AN — If Equipped Intersection Point on Map Press this button on the touchscreen to enter in two street Press this button on the touchscreen to select a destinanames as a destination. tion directly from the Map screen. By selecting a street segment or icon, you can quickly enter a destination Go Home without the need to input the city name or street. Press this button on the touchscreen to program or City Center confirm a route to the saved home address.
Uconnect® 8.4AN — If Equipped 343 Closest City Press this button on the touchscreen to route to a nearby city. The screen will display an alphabetical listing of nearby cities. The navigation system will calculate a route with the destination at the center of the nearby city. Phone Number Press this button on the touchscreen to route to a location or point of interest by the phone number.
344 Uconnect® 8.4AN — If Equipped To change the state and/or country, press the “state, country” button on the touchscreen and follow the prompts to change the state and/or country. If you press “Spell City,” you will have to enter and select/press the desired city name, followed by the desired street name then the house number. If you press “Spell Street,” you will have to enter and select/press the desired street name in the correct city and then you will have to enter the house number.
Uconnect® 8.4AN — If Equipped 345 3. Press the “Yes” button on the touchscreen to confirm If you are currently on a route guidance and you select your destination and begin your route. Recent, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
346 Uconnect® 8.4AN — If Equipped Where To? — Recent To route to a Recent destination, follow these steps: 2. Press the button on the touchscreen with the name of the desired destination. 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Recent” button on the touchscreen. 3. Confirm the route with “Yes” to start the route guidance. To delete a destination from the list, press the “Trash Can Icon” button on the touchscreen.
Uconnect® 8.4AN — If Equipped 347 To display the options for a destination press the The following Options are available for each destination: “Options” button on the touchscreen that looks like a • Edit Name gear. • Add Phone Number • Move Up in the list • Move Down in the list • Place Pin on the location (saves the spot on the list) NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
348 Uconnect® 8.4AN — If Equipped • Hotels/Motels • ATM/Banking • All POIs • Spell POI Name The Point of Interest database allows you to select a destination from a list of locations and public places, or points of interest (POI)s.
Uconnect® 8.4AN — If Equipped 349 You can also change your POI search area, by pressing the “Change Search Area” button on the touchscreen. You will have the following options to change your search area: • Around Me • In a City 4 • Near Destination (only available during route guidance) • Along Route (only available during route guidance) NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
350 Uconnect® 8.4AN — If Equipped POI — Gas Stations To select a Gas Station POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen. 2. Press the “Gas Stations” button on the touchscreen. You can search for a gas station by the following categories, which are button tabs at the top of the screen.
Uconnect® 8.4AN — If Equipped 351 If you are currently on a route guidance and you select a gas station, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. POI — Restaurants 3.
352 Uconnect® 8.4AN — If Equipped 2. Press the “Restaurants” button on the touchscreen. You can search for a restaurants by the following categories, which are button tabs at the top of the screen.
Uconnect® 8.4AN — If Equipped 353 3. Press the desired Restaurant and press “Yes” to con- POI — Hotels/Motels firm the destination. To select a Hotel or Motel POI, follow these steps: If you are currently on a route guidance and you select a 1. While in the Nav Main Menu, press the “Where To?” Restaurant, the system will ask you to choose one of the button on the touchscreen, press the “Point of Interest” following: button on the touchscreen.
354 Uconnect® 8.4AN — If Equipped 2. Press the “Hotels/Motels” button on the touchscreen. • Type • ABC (Search) 3. Press the desired hotel or motel and press “Yes” to confirm the destination.
Uconnect® 8.4AN — If Equipped 355 POI — ATM/Banking To select a ATM or Bank POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen. 4 2. Press the “ATM/Banking” button on the touchscreen. You can search for an ATM or Bank by the following categories, which are button tabs at the top of the screen.
356 Uconnect® 8.4AN — If Equipped 3. Press the desired ATM or Bank and press “Yes” to All POIs confirm the destination. To select a POI type, follow these steps: If you are currently on a route guidance and you select an 1. While in the Nav Main Menu, press the “Where To?” ATM or Bank POI, the system will ask you to choose one button on the touchscreen, then press the “Point of of the following: Interest” button on the touchscreen.
Uconnect® 8.4AN — If Equipped 357 2. Press “All POIs” button on the touchscreen. You can search through the available POI categories to find your desired POI.
358 Uconnect® 8.4AN — If Equipped If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. POI — Spell Name 3. Select a category and then select a subcategory if necessary.
Uconnect® 8.4AN — If Equipped 359 4 2. Press the “Spell Name” button on the touchscreen. 3. A keyboard will appear on the screen. Type in the POI that you want to search and press the “List” button on the touchscreen to display available items. 4. Press the desired POI and press “Yes” to confirm the destination.
360 Uconnect® 8.4AN — If Equipped If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Where To? — Favorite Destinations To route to a Favorite destination, follow these steps: 1.
Uconnect® 8.4AN — If Equipped 361 3. To delete a destination from the list, press the “Trash If you are currently on a route guidance and you select a Can Icon” button on the touchscreen. Favorite, the system will ask you to choose one of the following: 4. To save a favorite destination, press the “Add Favorite” button on the touchscreen and follow the steps to • Cancel previous route route a destination. • Add as first destination 5.
362 Uconnect® 8.4AN — If Equipped 2. Press the “Spell Intersection” button on the touchscreen. To enter a destination by Intersection, follow these steps: Where To? — Intersection 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Intersection” button on the touchscreen. This menu shows the default country and state setting.
Uconnect® 8.4AN — If Equipped 363 3. If you press “Spell City,” enter and press the desired 4. Once the correct City and Intersection has been encity name, followed by the desired street name, then tered, you will be asked to confirm your destination. enter the intersection street. 5. Press the “Yes” button on the touchscreen to confirm If you press “Spell Street,” enter and press the desired your destination and begin your route.
364 Uconnect® 8.4AN — If Equipped Where To? — Go Home To enter your Home Address, follow these steps: If there is no Home Address entered, press “Yes” to enter it now. 2. To set your set your Home Address choose one of the 1. While in the Nav Main Menu, press the “Where To?” following options: button on the touchscreen then press the “Go Home” button on the touchscreen. NOTE: Refer to the individual section of the chosen option for further information.
Uconnect® 8.4AN — If Equipped 365 Once you have generated your Home Address, you will 3. Press “Clear Home” and then press “Yes” to clear/ be asked to Save it. delete your Home Address. 3. Press the “Save” button on the touchscreen to confirm 4. To enter in a new Home Address, follow the Where your destination and begin the route to your Home To? – Go Home procedure. Address. NOTE: You can press the “back arrow” button on the 4.
366 Uconnect® 8.4AN — If Equipped 2. Press the “Trips” button on the touchscreen. 3. Press the button on the touchscreen with the name of the desired Trip and press the first destination in the list. 4. Confirm the route by pressing “Yes” to start the route guidance.
Uconnect® 8.4AN — If Equipped 367 To add a Trip, follow these steps: 1. Press the “Create new Trip” button on the touchscreen. 2. Type in the new Trip Name. • City Center • Closest Cities • Phone Number NOTE: Refer to the individual section of the chosen 3. Press “Add Destination” to add destinations to your option for further information. trip. 5. Add more needed destinations to your trip. 4.
368 Uconnect® 8.4AN — If Equipped The following Options are available for each trip: • Edit Name • Move Up in the list • Move Down in the list NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Where To? — GEO Coordinate To route to a saved Trip, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “GEO Coordinate” button on the touchscreen. 2.
Uconnect® 8.4AN — If Equipped 369 5. Press “OK” to confirm the destination. 6. Press the “Yes” button on the touchscreen to confirm your destination and begin your route.
370 Uconnect® 8.4AN — If Equipped 2. Use the touchscreen to drag the center of the cross over the desired destination. To enter a destination by Point on Map, follow these steps: Where To? — Point on Map 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “Point on Map” button on the touchscreen. 3.
Uconnect® 8.4AN — If Equipped 371 4. Press the “Yes” button on the touchscreen to confirm Where To? — City Center your destination and begin your route. To enter a destination by City Center, follow these steps: If you are currently on a route guidance and you select a 1. While in the Nav Main Menu, press the “Where To?” Point on Map, the system will ask you to choose one of button on the touchscreen then press the “City Center” the following: button on the touchscreen.
372 Uconnect® 8.4AN — If Equipped 2. Enter the name of the City you would like to route to. 4. Press the “Yes” button on the touchscreen to confirm your destination and begin your route. If you are currently on a route guidance and you select a City Center, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination 3. Press the desired city from the list.
Uconnect® 8.4AN — If Equipped 373 Where To? — Closest City 2. Press the desired city from the list. To enter a destination by Closest City, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “Closest City” button on the touchscreen. 4 3. Press the “Yes” button on the touchscreen to confirm your destination and begin your route.
374 Uconnect® 8.4AN — If Equipped If you are currently on a route guidance and you select a Closest City, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Where To? — Trails 2. Press “Start Trail Recording.” When starting to drive a trail you want to record, follow 3.
Uconnect® 8.4AN — If Equipped 375 2. Enter the Phone Number of the destination you would like to route to. To enter a destination by Phone number, follow these steps: 3. Press the desired destination from the list. Where To? — Phone 1. While in the Nav Main Menu, press the “Where To?” 4. Press the “Yes” button on the touchscreen to confirm button on the touchscreen then press the “Phone your destination and begin your route. Number” button on the touchscreen.
376 Uconnect® 8.4AN — If Equipped Before Route Guidance Before confirming the route with the “Yes” button on the touchscreen, it is possible to select options different from the default route settings. • Options – Press the “Options” button on the touchscreen to display a list of options to alter your route. To make a selection press and release the desired setting until a check-mark appears. • Avoid – Press the “Avoid” button on the touchscreen to choose road types to avoid during your route.
Uconnect® 8.4AN — If Equipped 377 • Save – Press the “Save” button on the touchscreen to save the destination as a Favorite. Press the “Yes” button on the touchscreen to confirm your destination and to start your route guidance. NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. View Map Press the “View Map” button from the Nav Main Menu to display a map of your current position.
378 Uconnect® 8.4AN — If Equipped Zoom In +/Zoom Out – Press the “Zoom In (+) or Zoom Out (–)” buttons on the touchscreen to change the zoom level. Roads with lower functional classification are not shown in higher zoom levels. (E.g. residential streets, lightly-traveled county roads.) Time of Arrival/Time to Destination/Distance (only during route guidance) Press the button in the upper right area of the screen to the display items available. Press the desired option button on the touchscreen.
Uconnect® 8.4AN — If Equipped 379 Turn List (only during route guidance) • Settings Press the area in the upper center part of the screen that Press this button on the touchscreen to view all the displays your next turn to see a Turn List for your current available settings. See View Map – Settings for more route. information. Press a turn in the displayed Turn List for the following • Repeat options: Press this button on the touchscreen to repeat the current • Show on Map voice prompt.
380 Uconnect® 8.4AN — If Equipped Where Am I? Press the area in the lower center part of the screen that displays your current location to view the Where Am I? view. Where Am I? displays the address and GEO Coordinates of your current location. • Press the “GPS” button on the touchscreen to view the GPS information. • Press the “Save” button on the touchscreen to save the location in your Favorites.
Uconnect® 8.4AN — If Equipped 381 View Map — Settings The following Map Settings are available: Map Setup Press this button on the touchscreen to display items to customize how your map is viewed. Settings – Map Setup for more information. Speed Limit Press this button on the touchscreen to turn on/off speed limit warning announcements and to enter a pre-defined speed limit for your route. Guidance Press this button on the touchscreen to display items to customize your route guidance.
382 Uconnect® 8.4AN — If Equipped GPS Press this button on the touchscreen to change the GPS display. Press the desired button on the touchscreen. • Decimal • DMS • DM Settings — Map Setup With the Map displayed, press the “Options” button on the touchscreen, then press the “Settings” button on the touchscreen and then the “Map Setup” button on the The following Map Setup options are available: touchscreen. You can also access this menu by pressing the “Settings” button lower right of the Nav Main Menu.
Uconnect® 8.4AN — If Equipped 383 • 3D (3D Map View Is Only Available On Uconnect Destination Information 8.4AN. Must Select 3D City Models Or 3D Landmarks Press this button on the touchscreen to change the For 3D Map View To Display.) Destination Information that is displayed in the upper • 2D right corner of the Map View. Press the desired button on the touchscreen. Orientation • Time of Arrival Press this button on the touchscreen to change how the Map Orientation is displayed.
384 Uconnect® 8.4AN — If Equipped • Near • Off Vehicle Icon Press this button on the touchscreen to change the vehicle icon that is displayed while in Map View. Press Previous or Next to view the available icons. Press the back icon button on the touchscreen when you’ve made you selection. Show POI Icons while in Map View. Press and release the desired selection button on the touchscreen until a check-mark appears, showing the setting has been selected.
Uconnect® 8.4AN — If Equipped 385 3D City Models (Available On The Uconnect 8.4AN) Park Areas Press this button on the touchscreen to display 3D city models while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected. Press this button on the touchscreen to display Park Areas while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.
386 Uconnect® 8.4AN — If Equipped River Names The following Guidance options are available. Press this button on the touchscreen to display River Names while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected. • Play Voice Guidance Prompts Press this button on the touchscreen to enable Voice Guidance Prompts during route guidance.
Uconnect® 8.4AN — If Equipped 387 • Junction View Automatic By Delay Time Manual Off Press this button on the touchscreen to enable Junction View during route guidance. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.
388 Uconnect® 8.4AN — If Equipped NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Information From the Nav Main Menu, press the “Information” button on the touchscreen and select one of the following options to view additional information.
Uconnect® 8.4AN — If Equipped 389 Information — Where Am I? 2. Press the “Where Am I?” button on the touchscreen. To select “Where Am I?” information, follow these steps: 1. While in the Nav Main Menu, press the “Information” button on the touchscreen. 4 Where Am I? displays the address and GEO Coordinates of your current location.
390 Uconnect® 8.4AN — If Equipped 3. Press the “GPS” button on the touchscreen to view the GPS information. 4. Press the “Save” button on the touchscreen to save the location in your Favorites. NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Information — Trip Computer To select “Trip Computer” information, follow these steps: 1. While in the Nav Main Menu, press the “Information” button on the touchscreen. 2.
Uconnect® 8.4AN — If Equipped 391 • Moving average speed • Maximum speed reached • Total time traveled • Travel time spent moving • Travel time spent stopped NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the ‘X’ button on the touchscreen to exit.
392 Uconnect® 8.4AN — If Equipped • Fire Department – Search and route a Fire Department Press the “Save” button on the touchscreen to save your close to your current location current location in Favorites. NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Emergency — Hospital To search for a Hospital close to your current location, follow these steps: 1.
Uconnect® 8.4AN — If Equipped 393 4 2. Press the “Hospital” button on the touchscreen. You can search for a Hospital by the following categories, which are button tabs at the top of the screen.
394 Uconnect® 8.4AN — If Equipped NOTE: In case of emergency, please contact the facility to Emergency — Police verify their availability before proceeding. To search for a Police Station close to your current 3. Press the desired Hospital and press “Yes” to confirm location, follow these steps: the destination. 1.
Uconnect® 8.4AN — If Equipped 395 2. Press the “Police” button on the touchscreen. NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. 3. Press the desired Police Station and press “Yes” to confirm the destination.
396 Uconnect® 8.4AN — If Equipped 2. Press the “Fire Department” button on the touchscreen. To search for a Fire Departmentclose to your current location, follow these steps: Emergency — Fire Department 1. While in the Nav Main Menu, press the “Emergency” button on the touchscreen.
Uconnect® 8.4AN — If Equipped 397 You can search for a Fire Department by the following categories, which are button tabs at the top of the screen. • Name • Distance • ABC (Search) NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
398 Uconnect® 8.4AN — If Equipped 2. Or, visit DriveUconnect.com and follow these steps: • Under the “Help & Support” tab, select your vehicle brand. Click “NAVTEQ NAVIGATION UPDATES.” Simply enter your information and place your order. travel time along your route. Since the service is integrated with a vehicle’s navigation system, SiriusXM Traffic can help drivers pick the fastest route based on traffic conditions. 3. Or, if you wish, you can also visit your dealer or place 1.
Uconnect® 8.4AN — If Equipped 399 SiriusXM TRAVEL LINK — U.S. MARKET ONLY (AVAILABLE ON 8.4AN — IF EQUIPPED) In addition to delivering over 160 channels of the best sports, entertainment, talk, and commercial-free music, SiriusXM offers premium data services that work in conjunction with compatible navigation systems. SiriusXM Travel Link brings a wealth of useful information into your vehicle and right to your fingertips.
400 Uconnect® 8.
Uconnect® 8.4AN — If Equipped 401 9–1–1 Call Operating Instructions 1. Push the “9-1-1 Call” button on the Rearview Mirror; 3.
402 Uconnect® 8.4AN — If Equipped NOTE: Once a connection is made between the vehicle’s 6. If a connection between the vehicle and a 9-1-1 opera9-1-1 Call system and the 9-1-1 operator, the 9-1-1 operator is made, the 9-1-1 Call system may transmit certain tor may be able to open a voice connection with the vehicle information to a 9-1-1 operator, including the vehicle to determine if additional help is needed. Once last known GPS coordinates of your vehicle.
Uconnect® 8.4AN — If Equipped 403 WARNING! If anyone in the vehicle could be in danger (e.g., fire or smoke is visible, dangerous road conditions or location), do not wait for voice contact from a 9-1-1 operator. All occupants should exit the vehicle immediately and move to a safe location. WARNING! Do not add any aftermarket electrical equipment to the vehicle’s electrical system. This may prevent your vehicle from sending a signal to initiate an emergency call.
404 Uconnect® 8.4AN — If Equipped WARNING! • Ignoring the Rearview Mirror light could mean you may not have 9-1-1 Call capability if needed. If the Rearview Mirror light is illuminated, have an authorized dealer service the 9-1-1 Call system immediately. • The Occupant Restraint Controller (ORC) turns on the Air Bag Warning Light on the instrument panel if a malfunction is detected in any part of the air bag system.
Uconnect® 8.4AN — If Equipped 405 • Operator error by the 9-1-1 operator. • Wireless network congestion. • Weather. • Buildings, structures, geographic terrain, or tunnels. WARNING! Never place anything on or near the vehicle’s wireless and GPS antennas. You could prevent wireless and GPS signal reception, which can prevent your vehicle from placing an emergency call. Wireless and GPS signal reception is required for the 9-1-1 Call system to function properly.
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS CONTENTS ! Uconnect® VOICE RECOGNITION . . . . . . . . . .408 ▫ Voice Text Reply . . . . . . . . . . . . . . . . . . . . . .416 ▫ Introducing Uconnect® . . . . . . . . . . . . . . . . .408 ▫ Uconnect® Access* . . . . . . . . . . . . . . . . . . . .417 ▫ Get Started . . . . . . . . . . . . . . . . . . . . . . . . . .408 ▫ Register . . . . . . . . . . . . . . . . . . . . . . . . . . . .418 ▫ Basic Voice Commands. . . . . . . . . . . . . . . . . .
408 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS Uconnect® VOICE RECOGNITION Introducing Uconnect® If you see the icon on your touchscreen, you have the Uconnect® 8.4AN system. If not, you have a Uconnect® 8.4A system. Start using Uconnect® Voice Recognition with these Get Started helpful quick tips. It provides the key Voice Commands and tips you need to know to control your Uconnect® 1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone pairing 8.4A or 8.
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 409 3. Speak clearly at a normal pace and volume while facing straight ahead. The microphone is positioned on the rearview mirror and aimed at the driver. 4. Each time you give a Voice Command, you must first press either the VR or Phone button, wait until after the beep, then say your Voice Command. 5. You can interrupt the help message or system prompts by pressing the VR or Phone button and saying a Voice Command from current category.
410 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect® system. Press the VR button .
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 411 • Tune to Satellite Channel Hits 1 TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, press the VR button and say “Help.” The system will provide you with a list of commands. 5 Radio Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio® stations you would like to hear. (Subscription or included SiriusXM Satellite Radio trial required.) Press the VR button .
412 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS Media TIP: Press the Browse button on the touchscreen to see all of the music on your iPod® or USB device. Your Voice Uconnect® offers connections via USB, SD, Bluetooth® Command must match exactly how the artist, album, and auxiliary ports. Voice operation is only available for song and genre information is displayed. connected USB and iPod® devices. (Remote CD player optional and not available on all vehicles.) .
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 413 Climate Too hot? Too cold? Adjust vehicle temperatures handsfree and keep everyone comfortable while you keep moving ahead. (If vehicle is equipped with climate control.) . After the beep, say one of the Press the VR button following commands% • Set driver temperature to 70 degrees • Set passenger temperature to 70 degrees TIP: Voice Command for Climate may only be used to adjust the interior temperature of your vehicle.
414 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS Navigation The Uconnect® navigation feature helps you save time and become more productive when you know exactly how to get to where you want to go. (Navigation is optional on the Uconnect® 8.4A system. See your dealer to activate navigation at any time.) . After 1. To enter a destination, press the VR button the beep, say% • For the 8.4A Uconnect® System, say... “Enter state” • For the 8.4AN Uconnect® System, say...
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 415 Phone TIP: When providing a Voice Command, press the Phone button and say “Call,” then pronounce the name Making and answering hands-free phone calls is easy exactly as it appears in your phone book. When a with Uconnect®. When the Phonebook button is illumicontact has multiple phone numbers, you can say nated on your touchscreen, your system is ready. Check “Call John Smith work.” UconnectPhone.
416 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS Voice Text Reply NOTE: Uconnect® Access registration is not required to utilize Voice Text Reply. Uconnect® will announce incoming text messages. Press and say Listen. (Must have comthe Phone button patible mobile phone paired to Uconnect® system.) 1. Once an incoming text message is read to you, press the Phone button . After the beep, say... “Reply” 2. Listen to the Uconnect® prompts.
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 417 Uconnect® Access* Remote Door Lock/Unlock An included trial and/or subscription is required to take advantage of the Uconnect® Access services in the next section of this guide. To register with Uconnect® Access, press the + MORE button on the 6.5-inch touchscreen to get started. Detailed registration instructions can be found on the next page.
418 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS Register 1. Press the Apps button on the bottom of the touchscreen. 2. If a pop-up message appears, press Register or go to the Favorite Apps menu and press Uconnect® Registration. 3. Read through the registration instructions. Enter and confirm your personal email address. Then press Send. 4. Check your personal inbox for an email from Mobile App Uconnect® Access. 5.
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 419 2. On the Dashboard page, enter your mobile phone number to receive a link to download the App on your mobile device. Or, go to iTunes® or Google Play and search for the Uconnect® Access App. 3. To activate the App, enter your Mopar Owner Connect user name and password and log in. Your vehicle is then connected to your mobile device. Voice Texting 1. To send a message, press the Phone button .
420 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 3. The Uconnect® system will repeat your message and provide a variety of options to add to, delete, send or hear the message again. After the beep, tell Uconnect® what you’d like to do. For instance, if you’re happy with your message, after the beep, say “Send.” YELP® Once registered with Uconnect® Access, you can use your voice to search for the most popular places or things around you. . After the beep, say% 1.
Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 421 TIP: Once you perform a search, you can reorganize the SiriusXM Travel Link™ results by selecting either the Best Match, Rating or Need to find a gas station, view local movie listings, Distance tab on the top of the touchscreen display. check a sports score or the 5 - day weather forecast? SiriusXM Travel Link™ is a suite of services that brings a wealth of information right to your Uconnect® 8.4AN system. (Not available for 8.4A system.) .
422 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS TIP: Traffic alerts are not accessible with Voice Com- Additional Information mand. © 2014 Chrysler Group LLC. All rights reserved. Mopar® and Uconnect® are registered trademarks and Mopar Owner Connect is a trademark of Chrysler Group LLC. Android is a trademark of Google Inc. SiriusXM and all related marks and logos are trademarks of SiriusXM Radio Inc. Yelp, Yelp logo, Yelp burst and related marks are registered trademarks of Yelp®. DriveUconnect.
SAFETY GUIDELINES CONTENTS ! SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . .
424 SAFETY GUIDELINES SAFETY GUIDELINES WARNING! ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume all risks related to the use of the Uconnect® features and applications in this vehicle. Only use Uconnect® when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. • Glance at the screen only when safe to do so. If prolonged viewing of the screen is necessary, park in a safe location and set the parking brake.
SAFETY GUIDELINES 425 • Permanent hearing loss may occur if you play your • Do not spray any liquid or caustic chemicals directly music or the system at loud volumes. Exercise caution on the screen! Use a clean and dry micro fiber lens when setting the volume on your system. cleaning cloth in order to clean the touchscreen. • Keep drinks, rain, and other sources of moisture away • If necessary, use a lint-free cloth dampened with a from your system.
426 SAFETY GUIDELINES FCC Declaration This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
SAFETY GUIDELINES 427 Safety Information Exposure to Radio Frequency Radiation The radiated output power of the this internal wireless radio is far below the FCC radio frequency exposure limits. Nevertheless, the wireless radio shall be used in such a manner that the radio is 20 cm or further from the human body. The internal wireless radio operates within guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community.
Uconnect 8.4A/8.