Owner`s manual

ManualsBrandsChrysler ManualsAutomotiveuconnect

UConnect Hands Free Communications- Complete Instructions

HANDS–FREE COMMUNICATION (UConnect™) — IF EQUIPPED

UConnect™ is a voice-activated, hands-free, in- vehicle communications system.

UConnect™ allows you to dial a phone number with your cellular phone using

simple voice commands (e.g., “Call Mike” ”Work” or “Dial 248-555-1212”). Your

cellular phone’s audio is transmitted through your vehicle’s audio system; the

system will automatically mute your radio when using the UConnect™ system.

NOTE: The UConnect™ system use requires a cellular phone equipped with the

Bluetooth “Hands-Free Profile, version 0.96 or higher. See

www.chrysler.com/uconnect for supported phones.

The UConnect™ system is fully integrated with the vehicle’s audio system. The

volume of the UConnect™system can either be adjusted from the radio volume

control knob, or from the steering wheel radio control (right switch), if so equipped.

The radio display will be used for visual prompts from the UConnect™ system such

as “CELL” or caller ID on certain radios.

Operations

Voice commands can be used to operate the UConnect™ system and to navigate

through the UConnect™ menu structure. Voice commands are required after most

UConnect™ system prompts. You will be prompted for a specific command and

then guided through the available options.

• Prior to giving a voice command, one must wait for the voice on beep, which

follows the “Ready” prompt or another prompt.

• For certain operations, compound commands can be used. For example, instead of

saying “Setup” and then “Phone Pairing,” the following compound command can

be said: “Setup Phone Pairing.”

• For each feature explanation in this section, only the combined form of the voice

command is given. You can also break the commands into parts and say each part

of the command, when you are asked for it.

For example, you can either use the combined form voice command “Phonebook

New Entry,” or you can break the combined form command into two voice

commands: “Phonebook” and “New Entry”. Please remember, the UConnect™

system works best when you talk in a normal conversational tone, as if speaking to

some one sitting eight feet away from you.

Voice Command Tree

Refer to “Voice Tree” at the end of this section.

Help Command

If you need assistance at any prompt or if you want to know what your options are

at any prompt, say “Help” following the voice on beep. The UConnect™ system will

Summary of content (13 pages)

PAGE 1
UConnect Hands Free Communications- Complete Instructions HANDS–FREE COMMUNICATION (UConnect™) — IF EQUIPPED UConnect™ is a voice-activated, hands-free, in- vehicle communications system. UConnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., “Call Mike” ”Work” or “Dial 248-555-1212”). Your cellular phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the UConnect™ system.
PAGE 2
play all the options at any prompt if you ask for help. To activate the UConnect™ system from idle, simply press the "Phone" button and follow audible prompts for directions. All UConnect™ system sessions begin with a press of the ’Phone’ button on the mirror. Cancel Command At any prompt, after the voice on beep, you can say “Cancel” and you will be returned to the main menu. However, in a few instances the system will take you back to the previous menu.
PAGE 3
multiple cellular phones are in the vehicle at the same time. For example, if priority 3 and priority 5 phones are present in the vehicle, the UConnect™system will use the priority 3 cellular phone when you make a call. You can select to use a lower priority cellular phone at any time (refer to “Advanced Phone Connectivity”). Dial by Saying a Number • Press the "Phone" button to begin. • After the “Ready” prompt and the following beep, say “Dial”. • System will prompt you to say the number you want call.
PAGE 4
Edit Entries in the UConnect™ Phonebook NOTE: Editing phonebook entries is recommended when vehicle is not in motion. • Press the "Phone" button to begin. • After the “Ready” prompt and the following beep, say “Phonebook Edit”. • You will then be asked for the name of the phonebook entry that you wish to edit. • Next, choose the number designation (home, work, mobile, or pager) that you wish to edit. • When prompted, recite the new phone number for the phonebook entry that you are editing.
PAGE 5
the playing of the desired name and say “Call”. NOTE: the user can also exercise “Edit” or “Delete” operations at this point. • The UConnect™ system will then prompt you as to number designation you wish to call. • The selected number will be dialed. The following features can be accessed through the UConnect ™ system if the feature(s) are available on your cellular service plan. For example, if your cellular service plan provides three-way calling, this feature can be accessed through the UConnect™ system.
PAGE 6
Conference Call When two calls are in progress (one active and one on hold), press and hold the "Phone" button until you hear a double beep indicating that the two calls have been joined into one conference call. Three-Way Calling To initiate three-way calling, press the "Voice Recognition" button while a call is in progress and make a second phone call as described under “Making a Second Call while Current Call in Progress.
PAGE 7
language. NOTE: After every UConnect™ language change operation, only the language specific 32 name phonebook is usable. The paired phone name is not language specific and usable across all languages. Emergency Assistance If you are in an emergency and the mobile phone is reachable: • Pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the UConnect™ system is operational, you may reach the emergency number as follows: • Press the "Phone" button to begin.
PAGE 8
Systems”. Working with Automated Systems This method is designed to be used in instances where one generally has to press numbers on the cellular phone keypad while navigating through an automated telephone system. You can use your UConnect™ system to access a voicemail system or an automated service, such as, paging service or automated customer service. Some services require immediate response selection, in some instances, that may be too quick for use of UConnect™ system.
PAGE 9
caution and take precautionary safety measures). By dialing a number with your paired Bluetooth™ cellular phone, the audio will be played through your vehicle’s audio system. The UConnect™ system will work the same as if you dial the number using voice recognition. NOTE: Certain brands of mobile phones do not send the dial ring to the UConnect™ system to play it on the vehicle audio system, so you will not hear it.
PAGE 10
order from the highest to the lowest priority. To “select” or “delete” a paired phone being announced, press the "Voice recognition" button and say “Select” or “Delete”. Also, see the next two sections for an alternate way to “select” or “delete” a paired phone. Select another Cellular Phone This feature allows you to select and start using another phone with the UConnect™ system. The phone must have been previously paired to the UConnect™ system that you want to use it with.
PAGE 11
• Storing names in phonebook when vehicle is not in motion is recommended. • It is not recommended to store similar sounding names in the UConnect™ phonebook. • UConnect™ phonebook name tag recognition rate is optimized for the voice of the person who stored the name in the phonebook. • You can say “O” (letter “O”) for “0” (zero). “800” must be spoken “eight-zerozero”.
PAGE 12
Phonebook Command Tree
PAGE 13
Setup Command Tree