USER’S MANUAL Uconnect Chrysler Group LLC 11UCN-226-AA First Edition Printed in U.S.A.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 Uconnect™ Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 3 Uconnect™ Multimedia - Video Entertainment System (VES)™ . . . . . . . . . . . . . . . . . . . . . . . . . . .41 3 4 Voice Command . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION Acting as the link to the world around you, the available Uconnect™ systems in your vehicle provide access to information, entertainment and technology. This • Uconnect™ User’s Manual consists of the follow systems: • Uconnect™ Phone equipped), listen to audio over the wireless headphones and play a variety of standard video games or audio devices.
INTRODUCTION This manual contains WARNINGS against operating procedures that could result in an accident or bodily injury. If you do not read the entire manual you may miss important information. Observe all WARNINGS! The information given in this manual is subject to change. 5 Before operating this Uconnect™ system for the first time, please read this manual carefully. Note the safety precautions described in this manual. If you have any questions, please contact the vehicle manufacturer.
Uconnect™ Phone 2 CONTENTS 䡵 Uconnect™ Phone — If Equipped ▫ Operation ........... 8 . . . . . . . . . . . . . . . . . . . . . . . . . 10 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . 18 ▫ Uconnect™ Phone Features . . . . . . . . . . . . . 21 ▫ Advanced Phone Connectivity . . . . . . . . . . . 26 ▫ Things You Should Know About Your Uconnect™ Phone . . . . . . . . . . . . . . . . . . . . . 28 ▫ General Information . . . . . . . . . . . . . . . . . .
8 Uconnect™ Phone Uconnect™ Phone — IF EQUIPPED WARNING! Uconnect™ Phone is a voice-activated, hands-free, invehicle communications system. Uconnect™ Phone al- Any voice commanded system should be used only lows you to dial a phone number with your cellular in safe driving conditions following local laws and phone using simple voice commands (e.g., ⬙Call” ѧ phone use. All attention should be kept on the “Mike” ѧ”Work⬙ or ⬙Dial” ѧ “248-555-1212⬙). Your cellular roadway ahead.
Uconnect™ Phone 9 system. Only one linked (or paired) cellular phone can be Voice Command Button Actual button location may vary with the raused with the system at a time. The system is available in dio. The individual buttons are described in the English, Spanish, or French languages. “Operation” section. Uconnect™ Phone Button The radio will contain the two control buttons The Uconnect™ Phone can be used with any Hands-Free Button and Voice Command (Phone Profile certified Bluetooth威 cellular phone.
10 Uconnect™ Phone The radio display will be used for visual prompts from • For each feature explanation in this section, only the the Uconnect™ Phone such as ⬙CELL⬙ or caller ID on combined form of the voice command is given. You certain radios. can also break the commands into parts and say each part of the command when you are asked for it.
Uconnect™ Phone 11 To activate the Uconnect™ Phone from idle, simply press The following are general phone to Uconnect™ Phone button and follow the audible prompts for pairing instructions: the directions. All Uconnect™ Phone sessions begin with a • Press the button to begin. button on the radio control head. press of the • After the ⬙Ready⬙ prompt and the following beep, say Cancel Command ⬙Setup Phone Pairing.
12 Uconnect™ Phone • You will then be asked to give your cellular phone a priority level between one and seven, with one being the highest priority. You can pair up to seven cellular phones to your Uconnect™ Phone. However, at any given time, only one cellular phone can be in use, connected to your Uconnect™ Phone. The priority allows the Uconnect™ Phone to know which cellular phone to use if multiple cellular phones are in the vehicle at the same time.
Uconnect™ Phone 13 • After the ⬙Ready⬙ prompt and the following beep, say • When prompted, say the name of the new entry. Use of the name of the person you want to call. For example, long names helps the voice command and it is recomyou can say ⬙John Doe,⬙ where John Doe is a previmended. For example, say ⬙Robert Smith⬙ or ⬙Robert⬙ ously stored name entry in the Uconnect™ phonebook instead of ⬙Bob.⬙ or downloaded phonebook. To learn how to store a • When prompted, enter the number designation (e.g.
14 Uconnect™ Phone The Uconnect™ phone will allow you to enter up to 32 • Automatic download and update, if supported, begins names in the phonebook with each name having up to as soon as the Bluetooth威 wireless phone connection is four associated phone numbers and designations. Each made to the Uconnect™ Phone, for example, after you language has a separate 32-name phonebook accessible start the vehicle. only in that language.
Uconnect™ Phone 15 • This downloaded phonebook cannot be edited or NOTE: deleted on the Uconnect™ Phone. These can only be • The phone handset must support Bluetooth威 OBEX transfers of phonebook entries to use this feature. edited on the cellular phone. The changes are transferred and updated to Uconnect™ Phone on the next • Some phones cannot send phonebook entries if they phone connection.
16 Uconnect™ Phone After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in NOTE: the phonebook, call the number you just edited, or return • Editing names in the phonebook is recommended to the main menu. when the vehicle is not in motion. ⬙Phonebook Edit⬙ can be used to add another phone • Automatic downloaded phonebook entries cannot be number to a name entry that already exists in the deleted or edited. phonebook.
Uconnect™ Phone • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. You can either say the name of a phonebook entry that you wish to delete or you can say ⬙List Names⬙ to hear a list of the entries in the phonebook from which you choose. To select one of the entries button while the from the list, press the Uconnect™ Phone is playing the desired entry and say ⬙Delete.
18 Uconnect™ Phone • After the ⬙Ready⬙ prompt and the following beep, say cellular service plan. For example, if your cellular service plan provides three-way calling, this feature can be ⬙Phonebook List Names.⬙ accessed through the Uconnect™ Phone. Check with • The Uconnect™ Phone will play the names of all the your cellular service provider for the features that you phonebook entries, including the downloaded phonehave. book entries, if available.
Uconnect™ Phone 19 call waiting that you normally hear when using your Place/Retrieve a Call From Hold button to place the current To put a call on hold, press the button until you hear cellular phone. Press the call on hold and answer the incoming call. a single beep. This indicates that the call is on hold. To bring the call back from hold, press and hold the NOTE: The Uconnect™ Phone compatible phones in the button until you hear a single beep.
20 Uconnect™ Phone Three-Way Calling To initiate three-way calling, press the button while a call is in progress, and make a second phone call, as described under ⬙Making a Second Call While Current Call is in Progress.⬙ After the second call has established, button until you hear a double press and hold the beep, indicating that the two calls have been joined into one conference call. Call Termination To end a call in progress, momentarily press the button.
Uconnect™ Phone 21 • After the ignition key is switched to OFF, a call can • After the ⬙Ready⬙ prompt and the following beep, say continue on the Uconnect™ Phone either until the call the name of the language you wish to switch to ends, or until the vehicle battery condition dictates English, Espanol, or Francais. cessation of the call on the Uconnect™ Phone and • Continue to follow the system prompts to complete transfer of the call to the cellular phone. the language selection.
22 Uconnect™ Phone If the phone is not reachable and the Uconnect™ Phone is • If supported, this number may be programmable on button and operational, you may reach the emergency number as some systems. To do this, press the follows: say ‘Setup’, followed by ‘Emergency’. • Press the • The Uconnect™ Phone does slightly lower your chances of successfully making a phone call as to that • After the ⬙Ready⬙ prompt and the following beep, say for the cellular phone directly.
Uconnect™ Phone 23 Towing Assistance If you need towing assistance: Paging To learn how to page, refer to ⬙Working with Automated Systems.⬙ Paging works properly except for pagers of • Press the button to begin. certain companies, which time out a little too soon to • After the ⬙Ready⬙ prompt and the following beep, say work properly with the Uconnect™ Phone. ⬙Towing Assistance.
24 Uconnect™ Phone When calling a number with your Uconnect™ Phone that normally requires you to enter in a touch-tone sequence on your cellular phone keypad, you can press the button and say the sequence you wish to enter, followed by the word ⬙Send.⬙ For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can button and say, ⬙3 7 4 6 # Send.
Uconnect™ Phone Turning Confirmation Prompts ON/OFF Turning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect™ Phone will not repeat a phone number before you dial it). 25 Dialing Using the Cellular Phone Keypad You can dial a phone number with your cellular phone keypad and still use the Uconnect™ Phone (while dialing via the cellular phone keypad, the user must exercise caution and take precautionary safety measures). By • Press the button to begin.
26 Uconnect™ Phone Mute/Un-Mute (Mute OFF) When you mute the Uconnect™ Phone, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the Uconnect™ Phone: • Press the button. • Following the beep, say ⬙Mute.⬙ In order to un-mute the Uconnect™ phone: • Press the button. • Following the beep, say ⬙Mute off.
Uconnect™ Phone 27 • When prompted, say ⬙List Phones.⬙ • The selected phone will be used for the next phone call. If the selected phone is not available, the • The Uconnect™ Phone will play the phone names of Uconnect™ Phone will return to using the highest all paired cellular phones in order from the highest to priority phone present in or near (approximately the lowest priority. To “select” or “delete” a paired within 30 ft (9 m)) the vehicle.
28 Uconnect™ Phone Things You Should Know About Your Uconnect™ Phone Uconnect™ Phone Tutorial To hear a brief tutorial of the system features, press the button and say “Uconnect™ Tutorial.” Voice Training For users experiencing difficulty with the system recognizing their voice commands or numbers, the Uconnect™ Phone Voice Training feature may be used.
Uconnect™ Phone Voice Command 29 • fully closed windows, • dry weather condition. • For best performance, adjust the rearview mirror to provide at least 1⁄2 in (1 cm) gap between the overhead • Even though the system is designed for users speaking console (if equipped) and the mirror. in North American English, French, and Spanish ac• Always wait for the beep before speaking. cents, the system may not always work for some.
30 Uconnect™ Phone • Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” or “eight-oh-oh” not “eight hundred”. • You can say ⬙O⬙ (letter ⬙O⬙) for ⬙0⬙ (zero). • Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. • In a convertible vehicle, system performance may be compromised with the convertible top down.
Uconnect™ Phone 31 Send Messages: SMS Uconnect™ Phone can read or send new messages on You can send messages using Uconnect™ Phone. To send your phone. a new message: Read Messages: • Press the button. If you receive a new text message while your phone is • After the “Ready” prompt and the following beep, say connected to Uconnect™ Phone, an announcement will “SMS Send” or “Send Messages.” be made to notify you that you have a new text message.
32 Uconnect™ Phone List of Preset Messages: 11. See You in 15 minutes 1. Yes 12. I am on my way 2. No 13. I’ll be late 3. Where are you? 14. Are you there yet? 4. I need more direction. 15. Where are we meeting? 5. L O L 16. Can this wait? 6. Why 17. Bye for now 7. I love you 18. When can we meet 8. Call me 19. Send number to call 9. Call me later 20. Start without me 10.
Uconnect™ Phone 33 Turn SMS Incoming Announcement ON/OFF Power-Up Turning the SMS Incoming Announcement OFF will stop After switching the ignition key from OFF to either the the system from announcing the new incoming mes- ON or ACC position, or after a language change, you must wait at least 15 seconds prior to using the system. sages. • Press the button.
34 Uconnect™ Phone Voice Tree
Uconnect™ Phone 35 2
36 Uconnect™ Phone
Uconnect™ Phone Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) 37 Voice Commands Alternate(s) Primary call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 2
38 Uconnect™ Phone Primary language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing phonebook previous record again Voice Commands Alternate(s) pairing phone book Voice Commands Alternate(s) Primary redial return to main menu select phone send set up towing assistance transfer call Uconnect™ Tutorial try again voice training work yes return or main menu select phone settings or phone set up
Uconnect™ Phone 39 General Information • This device may not cause harmful interference. This device complies with Part 15 of the FCC rules and • This device must accept any interference received, RSS 210 of Industry Canada. Operation is subject to the including interference that may cause undesired following conditions: operation. • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 3 CONTENTS 䡵 Uconnect™ Multimedia – Video Entertainment System (VES)™. . . . . . . . . . . . . . . . . . . . . . . . . 44 ▫ Listen To An Audio Source On Channel 2 While a Video Is Playing On Channel 1 . . . . . . 53 ▫ Getting Started . . . . . . . . . . . . . . . . . . . . . . . 44 ▫ Important Notes For Single Video Screen System . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42 Uconnect™ Multimedia - Video Entertainment System (VES)™ ▫ View Sirius Backseat TV™ . . . . . . . . . . . . . . . 61 ▫ Replacing The Batteries . . . . . . . . . . . . . . . . . 75 ▫ Play Video Games . . . . . . . . . . . . . . . . . . . . . 64 ▫ Unwired威 Stereo Headphone Lifetime Limited Warranty . . . . . . . . . . . . . . . . . . . . . 75 ▫ Listen To An Audio Source While a Video Is Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 䡵 System Information . . . . . . . . . . . . . .
Uconnect™ Multimedia - Video Entertainment System (VES)™ 43 ▫ Product Agreement . . . . . . . . . . . . . . . . . . . . 90 ▫ Reception Quality . . . . . . . . . . . . . . . . . . . . . 92 䡵 Sirius Backseat TV™ Activation . . . . . . . . . . . . 91 ▫ Remote Control Operation . . . . . . . . . . . . . . . 93 ▫ System Activation . . . . . . . . . . . . . . . . . . . . . 91 ▫ Deactivation/Signal Displays . . . . . . . . . . . . . 93 ▫ Satellite Antenna . . . . . . . . . . . . . . . . . . . . . .
44 Uconnect™ Multimedia - Video Entertainment System (VES)™ Uconnect™ Multimedia – Video Entertainment System (VES)™ Getting Started • Screen(s) located in the overhead console : Unfold the overhead LCD screen(s) by pushing the button in the center of the overhead console behind the screen(s). On Caravan and Town and Country vehicles with Dual Screen Systems refer to the Dual Video Screen section for more information.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 45 • When the Video Screen(s) are open and a DVD is inserted into the VES™ player, the screen(s) turn(s) on automatically, the headphone transmitters turn on and playback begins. • For Dual Video Screen System, Channel 1 on the Remote Control and Headphones refers to Screen 1 (second row) and Channel 2 on the Remote Control and Headphones refers to Screen 2 (third row). Refer to the Dual Video Screen section for more information.
46 Uconnect™ Multimedia - Video Entertainment System (VES)™ 2. While looking at the video screen, highlight DISC by either pressing Up/Down/Left/Right buttons or by re1. Press the OPEN/CLOSE or LOAD hard-key on the peatedly pressing the MODE button, then press ENTER radio faceplate (Touch-Screen). on the Remote Control. Or Play a DVD Press the LOAD button then corresponding number (1–6) where the DVD is to be loaded (Non-Touch-Screen). 2. Insert the DVD with the label facing up.
Uconnect™ Multimedia - Video Entertainment System (VES)™ Using the Touch-Screen Radio controls 1. Press the MENU hard-key on the radio faceplate. 3. Touch the 1 soft-key and then the DISC soft-key in the MEDIA column. To exit touch the back arrow soft-key at the top left of the screen. 2. Touch the Rear VES soft-key to display the Rear VES Controls. If a channel list appears on the right side of the screen, touch the HIDE LIST soft-key to display the Rear VES Controls screen.
48 Uconnect™ Multimedia - Video Entertainment System (VES)™ NOTE: View SIRIUS Backseat TV™ • To view a DVD on the radio press the RADIO/MEDIA Ensure the Remote Control and Headphone switch is on hard-key, on the radio faceplate, then touch the DISC Channel 1. tab soft-key and then the VIEW VIDEO soft-key. Using the Remote Control • Viewing a DVD on the Touch-Screen radio screen is 1. Press the MODE button on the Remote Control.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 49 Using the Touch-Screen Radio controls 1. Press the MENU hard-key on the radio faceplate. 2. Touch the Rear VES soft-key to display the Rear VES Controls. If a channel list appears on the right side of the screen, touch the HIDE LIST soft-key to display the Rear VES Controls screen Select TV mode on the VES screen NOTE: The VES™ system will retain the last setting when turned off. Rear VES soft-key.
50 Uconnect™ Multimedia - Video Entertainment System (VES)™ 3. Touch the 1 soft-key and then the TV soft-key in the NOTE: RADIO column. To exit touch the back arrow soft-key at • To view SIRIUS Backseat TV ™ on the radio press the RADIO/MEDIA hard-key, on the radio faceplate, then the top left of the screen. touch the TV tab soft-key and then the VIEW VIDEO soft-key.
Uconnect™ Multimedia - Video Entertainment System (VES)™ Play Video Games Connect the video game console to the Auxiliary RCA input jacks (1 set or 2 depending on vehicle) located on the back of the center console or on left side behind the second row seat. 51 When connecting an external source to the AUX input, be sure to follow the standard color coding for the VES™ jacks: NOTE: Certain high-end video games, such as Playstation3 and XBox360 will exceed the power limit of the vehicle’s Power Inverter.
52 Uconnect™ Multimedia - Video Entertainment System (VES)™ 2. While looking at the video screen, highlight VES AUX 1 or 2 (depending which AUX input the gaming console is plugged into), by either pressing Up/Down/Left/ Right buttons or by repeatedly pressing the MODE button, then press ENTER on the Remote Control. Using the Touch-Screen Radio controls 1. Press the MENU hard-key on the radio faceplate. 2. Touch the Rear VES soft-key to display the Rear VES Controls.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 3. Touch the 1 soft-key and then touch either AUX 1 or AUX 2 in the VES column (depending which AUX input is used). To exit press the back arrow soft-key at the top of the screen. 53 Listen to an Audio Source on Channel 2 while a Video is playing on Channel 1 Ensure the Remote Control and Headphone switch is on Channel 2. Using the Remote Control 1.
54 Uconnect™ Multimedia - Video Entertainment System (VES)™ 2. Touch the Rear VES soft-key to display the Rear VES Controls. If a channel list is displayed, press the HIDE LIST soft-key to display the Rear VES Controls screen. Select FM mode on the VES screen Using the Touch-Screen Radio controls 1. Press the MENU hard-key on the radio faceplate. Rear VES soft-key.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 55 3. To listen to an audio source on Channel 2 while a Important Notes for Single Video Screen System video is playing on Channel 1, touch the 2 soft-key and • VES™ is able to transmit two channels of stereo audio choose an audio source. To exit touch the back arrow simultaneously. soft-key at the top left of the left screen. • In split screen mode the left side equates to Channel 1 and right side equates to Channel 2.
56 Uconnect™ Multimedia - Video Entertainment System (VES)™ DUAL VIDEO SCREEN – CARAVAN/TOWN & COUNTRY ONLY (IF EQUIPPED) 3. To watch a DVD on Screen 1 for second row passengers, ensure the Remote Control and Headphone switch is on Channel 1. NOTE: Typically there are two different ways to operate the features of the Video Entertainment System (VES)™. 4. To watch a DVD on Screen 2 for third row passengers, ensure the Remote Control and Headphone switch is on • The Remote Control Channel 2.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 57 Using the Touch-Screen Radio controls 1. Press the MENU hard-key on the radio faceplate. 2. Touch the Rear VES soft-key to display the Rear VES Controls. If a channel list is displayed, press the HIDE LIST soft-key to display the Rear VES Controls screen. Select DISC mode on the VES screen. NOTE: • Channel/Screen 1 select mode information is shown on the left side of the screen.
58 Uconnect™ Multimedia - Video Entertainment System (VES)™ 3. Touch the 1 or 2 soft-key and then the DISC soft-key in NOTE: the MEDIA column. To exit touch the back arrow at the • To view a DVD on the radio press the RADIO/MEDIA hard-key, on the radio faceplate, then touch the DISC top left of the screen. tab soft-key and then the VIEW VIDEO soft-key.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 59 2. While looking at Screen 1 or 2, highlight VES DISC by either pressing Up/Down/Left/Right buttons or by re1. Insert the DVD with the label facing up. The VES™ peatedly pressing the MODE button, then press ENTER player automatically selects the appropriate mode after on the Remote Control. the disc is recognized and starts playing the DVD.
60 Uconnect™ Multimedia - Video Entertainment System (VES)™ NOTE: • Channel/Screen 1 select mode information is shown on the left side of the screen. • Channel/Screen 2 select mode information is shown on the right side of the screen. • The VES™ will retain the last setting when turned off. Using the Touch-Screen Radio controls 1. Press the MENU hard-key on the radio faceplate. 2. Touch the Rear VES soft-key to display the Rear VES Controls.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 61 • Viewing a DVD on the Touch-Screen radio screen is not available in all states/provinces, and the vehicle must be stopped, and the shifter must be in the PARK position for vehicles with automatic transmission. In vehicles with manual transmission the parking brake must be engaged. View SIRIUS Backseat TV™ Ensure the Remote Control and Headphone switch is on Channel 1 for Screen 1 or Channel 2 for Screen 2.
62 Uconnect™ Multimedia - Video Entertainment System (VES)™ Using the Touch-Screen Radio controls 1. Press the MENU hard-key on the radio faceplate. 2. Touch the Rear VES soft-key to display the Rear VES Controls. If a channel list is displayed, touch the HIDE LIST soft-key to display the Rear VES Controls screen. Select TV mode on the VES screen. NOTE: • Channel/Screen 1 select mode information is shown on the left side of the screen.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 63 3. Touch the 1 or 2 soft-key and then the TV soft-key in NOTE: the RADIO column. To exit touch the back arrow soft-key • To view a SIRIUS Backseat TV™ on the radio press the RADIO/MEDIA hard-key, on the radio faceplate, then at the left of the screen. touch the TV tab soft-key, select the channel and then the VIEW VIDEO soft-key.
64 Uconnect™ Multimedia - Video Entertainment System (VES)™ Play Video Games Connect the video game console to the Auxiliary RCA jacks ( 1 set or 2 depending on vehicle) located on the back of the center armrest or behind the left second row seat, depending on the vehicle. NOTE: Certain high-end video games, such as Playstation3 and XBox360 will exceed the power limit of the vehicle’s Power Inverter. Refer to the Power Inverter section in your vehicle’s Owner’s Manual for more information.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 65 Using the Touch-Screen Radio controls 1. Press the MENU hard-key on the radio faceplate. 2. Touch the Rear VES soft-key to display the Rear VES Controls. If a channel list is displayed, touch the HIDE LIST soft-key to display the Rear VES Controls screen. Select Ves AUX1 mode on the VES screen. NOTE: • Channel/Screen 1 select mode information is shown on the left side of the screen.
66 Uconnect™ Multimedia - Video Entertainment System (VES)™ 3. Touch the 1 or 2 soft-key and then touch either AUX 1 or AUX 2 in the VES column (depending which AUX input the gaming console is plugged into). To exit touch the back arrow soft-key at the top left of the screen. Listen to an Audio Source while a video is playing Ensure the Remote Control and Headphone switch are on the same channel. If watching a video on Screen 1 (second row), then Channel 2 could be used for audio.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 67 3 Select FM mode on the VES screen. Rear VES soft-key. 3. To listen to an audio source on Channel 1 while a video is playing on Channel/Screen 2, touch the 1 1. Press the MENU hard-key on the radio faceplate. soft-key and choose an audio source. To listen to an audio 2. Touch the Rear VES soft-key to display the Rear VES source on Channel 2 while a video is playing on Controls.
68 Uconnect™ Multimedia - Video Entertainment System (VES)™ Channel/Screen 1, touch the 2 soft-key and choose an Third Row Swivel Screen (if equipped) audio source. To exit touch the back arrow soft-key at the • The third row screen or Screen 2 has the ability to top left of the screen. lower and swivel to face forward. • While the swivel screen is facing forward, the second row screen or Screen 1 must be fully open in order for the swivel screen (Screen 2) to work.
Uconnect™ Multimedia - Video Entertainment System (VES)™ Important Notes for Dual Video Screen System 69 REMOTE CONTROL • VES is able to transmit two channels of stereo audio and video simultaneously. • In split screen mode the left side equates to Channel 1 and the right side equates to Channel 2. • Selecting a video source on Channel 1, the video source will display on the second row screen or Screen 1 and can be heard on Channel 1.
70 Uconnect™ Multimedia - Video Entertainment System (VES)™ 2. Channel Selector Indicators – When a button is 6. 䉲 / Prev – In radio modes, press to select to the pressed, the currently affected channel or channel button previous station. In disc modes, press to advance to the start of the current or previous audio track or video is illuminated momentarily. chapter. In satellite video mode, press to advance to the 3. Light – Turns the remote control backlighting on or off. previous channel.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 71 Down selects the previous directory. When listening to a mode is selected and the disc is stopped, press the SETUP disc in a radio with a multiple-disc changer, PROG Up button to access the DVD Setup menu. (see the DVD selects the next disc and PROG Down selects the previ- Setup Menu of this manual.) ous disc. 16. BACK – When navigating in menu mode, press to 11. MUTE – Press to mute the headphone audio output return to the previous screen.
72 Uconnect™ Multimedia - Video Entertainment System (VES)™ 19. 䉱 / NEXT – In radio modes, press to select to the next station. In disc modes, press to advance to the next audio track or video chapter. In satellite video mode, press to advance to the next channel. In menu modes, use to navigate in the menu. Remote Control Storage The video screen(s) come with a built in storage compartment for the remote control which is accessible when the screen is opened.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 73 Locking the Remote Control • Replace the batteries, making sure to orient them All remote control functionality can be disabled as a according to the polarity diagram shown. parental control feature. • Replace the battery compartment cover. • To disable the Remote Control from making any changes, press the Video Lock button on the DVD HEADPHONES OPERATION player (if equipped).
74 Uconnect™ Multimedia - Video Entertainment System (VES)™ NOTE: The rear video system must be turned on before sound can be heard from the headphones. To conserve battery life, the headphones will automatically turn off approximately three minutes after the rear video system is turned off. Changing the Audio Mode for Headphones 1. Ensure the Remote Control channel/screen selector switch is in the same position as the headphone selector switch.. 1. Volume Control 3. Channel Selection Switch 2.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 75 3. If the video screen is displaying a video source (such • Locate the battery compartment on the left ear cup of as a DVD Video), pressing DISPLAY shows the status on the headphones, and then slide the battery cover a popup banner at the bottom of the screen. Pressing the downward. MODE button will advance to the next mode.
76 Uconnect™ Multimedia - Video Entertainment System (VES)™ What Does This Warranty Cover? Except as specified apply to you. This warranty gives you specific legal below, this warranty covers any Product that in normal rights. You may also have other rights, which vary from jurisdiction to jurisdiction. use is defective in workmanship or materials.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 77 You may register your Unwired威 wireless headphones changed to a mode that is different from the VES™ online at www.unwiredtechnology.com or by phone at selected radio mode. When shared, the radio has priority over the VES™ or all radio modes (FM, AM, and SAT). 1-888-293-3332. The VES™ has the ability to switch tuner (AM/FM), SYSTEM INFORMATION SEEK, SCAN, TUNE, and recall presets in radio modes as long as it is not in shared mode.
78 Uconnect™ Multimedia - Video Entertainment System (VES)™ Information Mode Display 3. Channel 1 Audio Only/Mute 4. Channel 2 Mode 5. Channel 2 Shared Status 6. Channel 2 Audio Only/Mute 7. Channel 1 ENTER Button Action 8. Channel 2 ENTER Button Action 9. Clock 10. Video Lock 11. Not Available / Error Information Mode Video Screen Display 1. Channel 1 Mode 2. Channel 1 Shared Status 12.
Uconnect™ Multimedia - Video Entertainment System (VES)™ Numeric Keypad Menu 79 1. Press the remote control’s navigation buttons (䉱, 䉲, 䉴, 䉳) to navigate to the desired digit. 2. When the digit is highlighted, press the remote control’s ENTER button to select the digit. Repeat these steps until all digits are entered. 3. To delete the last digit, navigate to the Del button and press the remote control’s ENTER button. 4.
80 Uconnect™ Multimedia - Video Entertainment System (VES)™ Station List Menu remote control’s ENTER button to tune to that station. To jump through the list more quickly, navigate to the Page Up and Page Down icons on the screen. Disc Menu Channel Selection Menu For SIRIUS Backseat TV™ When listening to Satellite audio or watching SIRIUS Backseat TV™ (if equipped), pressing the remote control’s MENU button displays a list of all available channels.
Uconnect™ Multimedia - Video Entertainment System (VES)™ When listening to a CD Audio or CD Data disc, pressing the remote control’s MENU button displays a list of all commands which control playback of the disc. Using the options you can activate or cancel Scan play and Random play. Display Settings 81 When watching a video source (DVD Video with the disc in Play mode, Aux Video, SIRIUS Backseat TV™, etc.), pressing the remote control’s SETUP button activates the Display Settings menu.
82 Uconnect™ Multimedia - Video Entertainment System (VES)™ the remote control’s power button to turn audio on. If Listening To Audio With The Screen Closed To listen to only audio portion of the channel with the audio is still not heard, check that fully charged batteries are installed in the headphones. screen closed: • Set the audio to the desired source and channel. • Close the video screen.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 83 DVD Region Codes Recorded Discs The VES™ DVD player and many DVD discs are coded by geographic region. These region codes must match in order for the disc to play. If the region code for the DVD disc does not match the region code for the player, the disc will not play and will be ejected. The VES™ DVD player will play CD-R and CD-RW discs recorded in CD-Audio or Video-CD format, or as a CD-ROM containing MP3 or WMA files.
84 Uconnect™ Multimedia - Video Entertainment System (VES)™ • For multi-session CDs that contain only multiple CD- Do not use adhesive labels as they may separate from the Audio sessions, the player will renumber the tracks so disc, become stuck, and cause permanent damage to the DVD player. each track number is unique. • For CD Data (or CD-ROM) discs, always use the Compressed Audio Files (MP3 and WMA) ISO-9660 (Level 1 or Level 2), Joliet, or Romeo format.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 85 • Any file that is copy protected (such as those down- • To change the current directory, use the remote conloaded from many online music stores) will not play. trol’s PROG Up and Down buttons. The DVD player will automatically skip the file and Disc Errors begin playing the next available file.
86 Uconnect™ Multimedia - Video Entertainment System (VES)™ The DVD player may shut down during extremely hot Display conditions, such as when the vehicle’s interior tempera- Other Language Setup ture is above 120°F. When this occurs, the DVD player will display ⬙VES High Temp⬙ and will shut off the VES™ displays until a safe temperature is reached. This shutdown is necessary to protect the optics of the DVD player.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 87 All of the Language settings have a special ⬙Other⬙ setting • When the entire four-digit code is entered, press the to accommodate languages other than Japanese or Enremote control’s ENTER button. If the language code glish. These languages are selected using a special fouris not valid, the numbers all change back to ⬙*⬙. If the digit code. digits are visible after this step, then the language code is valid.
88 Uconnect™ Multimedia - Video Entertainment System (VES)™ them where lower numbers are designated for all audiences and higher numbers are designated for more adult audiences. When a DVD-Video disc is loaded, its rating is compared to the setting in the DVD player. If the rating of the disc is higher than the setting in the player, a Password screen is displayed. In order to watch the disc, the rear passenger must enter the correct password using the password entry method described below.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 89 • Using the remote control Left and Right cursor but- • After the four-digit password is entered, press the tons, select the Rating tab. remote control’s ENTER button to accept the change. • Highlight ⬙Change Password⬙, and then press the remote control’s ENTER button. • Enter the current password.
90 Uconnect™ Multimedia - Video Entertainment System (VES)™ To set the rating, activate the DVD Setup Menu and • Using the remote control’s Up and Down cursor follow these additional instructions: buttons, select the new rating level, and then press the remote control’s ENTER button to accept the change. • Using the remote control’s Left and Right cursor buttons, select the Rating tab.
Uconnect™ Multimedia - Video Entertainment System (VES)™ General Information 91 NOTE: SIRIUS Backseat TV™ is not available in Canada, Hawaii or Alaska. This system complies with Part 15 of the FCC Operation System Activation is subject to the following two conditions: SIRIUS Backseat TV™ service is pre-activated; you may 1. This device may not cause harmful interference. begin viewing the one year of SIRIUS video service that 2.
92 Uconnect™ Multimedia - Video Entertainment System (VES)™ 2. Your Vehicle Identification Number. There are different numbers for your video and audio subscriptions. To access the ESN/SID numbers, refer to section four in your vehicles Owner’s Manual on the DVD. Satellite Antenna To ensure optimum reception on vehicles available with a luggage rack, do not place items on the roof around the rooftop antenna location.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 93 • The vehicle is parked in an underground parking Audio - Cabin Speakers structure or under a physical obstacle. • Controlled from the radio unit only in the front seat. • Dense tree coverage may interrupt reception. Audio - Headphones • Driving under wide bridges or along tall buildings can • Turn the headphone switch on, a red light will indicate cause intermittent reception. that audio is playing through the headphones.
94 Uconnect™ Multimedia - Video Entertainment System (VES)™ ⴖAcquiring Signalⴖ This message is displayed when the receiver is actively searching for a satellite signal. Video program should return momentarily, a status bar will fill up during channel acquisition. Deactivation Screen When a receiver’s factory subscription period has lapsed, or is an after-sales video receiver (MOPAR), it will be necessary to call SIRIUS and (re) activate the SIRIUS subscription.
Voice Command CONTENTS 䡵 Voice Command — If Equipped . . . . . . . . . . . . 96 ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . . 97 ▫ Voice Command Operation . . . . . . . . . . . . . . 96 ▫ Voice Training . . . . . . . . . . . . . . . . . . . . . .
96 Voice Command VOICE COMMAND — IF EQUIPPED When you press the button, you will hear a beep. The beep is your signal to give a command. Voice Command Operation This Voice Command allows you to control NOTE: If you do not say a command within a few your AM, FM radio, satellite radio, disc player, seconds, the system will present you with a list of and a memo recorder. options. NOTE: Take care to speak into the Voice Command System as calmly and normally as possible.
Voice Command 97 These commands are universal and can be used from any Commands menu. All other commands can be used depending upon Voice Command understands two types of commands. Universal commands are available at all times. Local the active application. commands are available if the supported radio mode is For example, if you are in the disc menu and you are active. listening to FM radio, you can speak commands from the Changing the Volume disc menu or from the FM radio menu. button.
98 Voice Command In this mode, you can say the following commands: • “Radio” (to switch to the radio mode) • “Disc” (to switch to the disc mode) • “Memo” (to switch to the memo recorder) • “System Setup” (to switch to system setup) Radio FM To switch to the FM band, say “FM” or “Radio FM”.
Voice Command • “Previous Channel” (to select the previous channel) • “List Channel” (to hear a list of available channels) • “Select Name” (to say the name of a channel) • “Radio Menu” (to switch to the radio menu) • “Main Menu” (to switch to the main menu) Disc To switch to the disc mode, say “Disc”.
100 Voice Command − “Previous” (to play the previous memo) − “Delete” (to delete a memo) • “Delete All” (to delete all memos) Voice Training For users experiencing difficulty with the system recognizing their voice commands or numbers, Uconnect™ Phone Voice Training feature may be used. System Setup button, say “System Setup” and once 1. Press the To switch to system setup, say “Setup”. In this mode, you you are in that menu then say “Voice Training.
USER’S MANUAL Uconnect Chrysler Group LLC 11UCN-226-AA First Edition Printed in U.S.A.