User's Manual

Installation
The Sir
en can be placed in any location as long as it is within the
range with K1 Hub
;6ɑ
Set the entir
e system status to
Arm and then press the Tamper
Switch on the backside of the SS-
20 (as shown) to trigger an alarm
which conrms the connection
with K1 Hub
;6ɑ
Install the Sir
en using either the double-sided tape or the screws
with mollys included in the package.
Notice: Removing the Back Cover will result in triggering the
system and the siren sounding. You can disarm simply the alarm
with the app or KP-20 and continue the installation.
Specications
Model: SS-20
P
ower: 3V CR123A Li-Mn battery x 4 pcs
Sound: 90 Decibels
Frequency: 915MHz
Wireless range: ≤ 80 m (in open area)
Operating conditions:
0-50°C / 32° - 122°F, humidity < 90% RH (non-condensing)
Dimensions (L x W x H): 85 x 85 x 37mm / 3.35" x 3.35" x 1.46"