User's Manual

Encryption: Select the encryption type of the wireless access
point or wireless device you wish to connect. If
you’re adding a profile from an existing access
point or wireless device, the value will be selected
automatically, and please do not modify it.
WPA Input WPA preshared key here. If encryption is not
Preshared Key enabled, or you select ‘WEP’ as encryption type,
this field will be disabled and grayed out.
WEP Key You can select key type (Hex or ASCII) and input
WEP key here. If encryption is not enabled, or you
select ‘WPA’ as encryption type, this field will be
disabled and grayed out.
Show Password Check this box and all passphrases or security keys
you inputted will be displayed as you type, but not
replace your input with asterisk.
Use 802.1x Enable 802.1x wireless authentication. Please click
‘802.1x Setting’ button to set 802.1x parameters.
(See next section).