User's Manual

OEM Installation Manual
10
Figure 3-3 Add Profile – configuration
● Authentication Type – Three options, Open System, Shared-Key System or LEAP.
● 802.1x Setting – It enables when Authentication Type is setting to WPA.
● Encryption – Displays which encryption type that the driver is using. When you select
Open System, Shared-Key System as Network Authentication, there are two options: WEP
and None. If you select WPA-PSK as Network Authentication, there are TKIP and AES
options instead of WEP and None.
● Wep Key – Key #1, Key #2, Key #3, Key #4, the Key groups. You can enter 10 hexadecimal
digits (any combination of 0-9, a-f, A-F) or 5 ASCII characters for 64-bit (also called 40bits)
encryption. You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F) or 13
ASCII characters for 128-bit (also called 104bits) encryption.