User's Manual

3
TRANSMITTER:
1. LED indicator:
- Flashes when the remote unit transmits a reading.
2. Two-line LCD:
- Displays the current temperature and humidity monitored by the remote unit.
3. Channel slide switch:
- Assign the transmitter Channel 1, Channel 2 or Channel 3.
4. °C / °F:
- Switches between
°
C /
°
F.
5. RESET:
- Return all values to default value.
6. Battery compartment:
- Accommodates 2 AAA size batteries.
-
7. Battery door:
8. Wall mount holder:
- Supports the transmitter in wall mounting.
9. Folding table stand
BEFORE YOU BEGIN
TRANSMITTER:
1. Remove the removable stand, unscrew the screws of the back cover and lift the cover off.
2. Insert 2 x AAA batteries into the battery compartment. Be sure to insert them the right way round (see
polarity information +/- in the battery compartment).
3. The receiver can receive humidity and temperature data from up to 3 transmitters. Assign the channel to
each transmitter, Channel 1, 2 or 3 respectively by sliding the switch besides the battery compartment.
4. Press the reset key of the transmitter individually by a pin to confirm the channel setting.
5. Select the temperature unit by sliding the °C / °F switch besides the battery compartment.