Operating Guide

COMMERCIAL PLASTIC SEATS
Church Seats, Sheboygan Falls, WI 53085 Phone: [phone] Fax: [phone]
www.ChurchSeats.com
MODEL 295CT
• ELONGATED SEAT, OPEN FRONT LESS COVER
• SOLID PLASTIC
• POSTUREPEDIC CONTOUR DESIGN
• STA-TITE®, COMMERCIAL FASTENING SYSTEM™
18 1/2"
7 7/8"
19"
3 1/4"
14 1/4"
5 1/2"
295CT Concealed check hinge stops seat 11° beyond vertical.
295SSCT Self-sustaining, concealed check hinge holds seat in any raised position up to 11°
beyond vertical.
Seats shall be No. ____________ as manufactured by Church Seats.
Seats shall be heavy weight and injection-molded of solid plastic. Seats
shall be open front less cover for elongated bowl and feature exclusive
Posturepedic contour design and four large molded-in bumpers. Seats
shall have STA-TITE®, Commercial Fastening System™, featuring con-
cealed check hinges with 300 Series stainless steel posts and pintles that
stop seat 11 degrees beyond vertical.
Color to be ____________.
(Specify white or fixture manufacturer’s color.)
Hinges shall be 295CT / 295SSCT.
(Circle model based on description below.)
Ring thickness is
13
/16"
Ring thickness including the bumper is
1
"
Height of Seat is
2
-
1
/4"
SERIESSERIES
Assemble hinges. Using wrench,
tighten until lower
portion shears off.
Finger-tighten
fastening nuts.