User`s manual

27
The Camera setup screen displays the camera inputs in groups of four: 1-4, 5-8, 9-12 and 13-16.
In this screen you can tell the DVR which input connectors have cameras attached by turning the
camera number On or Off.
You can assign titles to each camera by highlighting the camera title box and pressing the
button. A virtual keyboard allows you to enter camera names.
Selecting the PTZ Device box causes a list of controllable cameras to display. Select your
camera from the list and press the
button. You will need to connect the camera to the RS485
terminal on the back of the DVR following the camera manufacturer’s instructions.
Figure 32 — PTZ Device list.