User manual

18
3.5.1.2 Press ”ENTER” button to confirm AUDIO INPUT
3.5.1.3 Press ”Up” “Down” to choose the AUDIO INPUT : 1~4
3.5.1.4 Press ”MENU” to exit and confirm current operation.
3.5.1.5 Press ”MENU” again to exit and close AUDIO INPUT setup mode.
3.5.2 BUZZER setup:
This device allows user to set the BUZZER. BUZZER will be trigged by event occurrence
when the setting is ON.
3.5.2.1 Press ” Up” or “ Down” to choose BUZZER
3.5.2.2 Press ” ENTER” button to confirm BUZZER
3.5.2.3 Press ” Up” or “ Down” to choose the BUZZER : ON/OFF
ON: Internal Buzzer ON
OFF: Internal Buzzer OFF
3.5.2.4 Press ” MENU” to exit and confirm current operation.
3.5.2.5 Press ” MENU ” again to exit and close BUZZER setup mode.
3.5.3 HDD OVERWRITE Setup option:
This device allows user to set the HDD OVERWRITE.
3.5.4.1 Press ” Up” or “ Down” to choose HDD OVERWRITE
3.5.4.2 Press ” ENTER” to confirm HDD OVERWRITE setup.
3.5.4.3 Press ” Up” or “Down” to choose HDD OVERWRITE setup
NO : When HDD full will stop recording
YES : When HDD full will overwrite the HDD recording
3.5.4.4 Press ” MENU” to exit and confirm current operation.
3.5.4.5 Press ” MENU” again to exit and close HDD OVERWRITE setup mode.
3.5.4 MESSAGE LATCH setup
This device allows user to decide the External Alarm graph showed on monitor or not.
3.5.4.1 Press ” Up” or “ Down” to choose MESSAGE LATCH setup
3.5.4.2 Press ” ENTER” button to confirm MESSAGE LATCH setup
3.5.4.3 Press ” Up” or “ Down” to choose the MESSAGE LATCH: YES/NO
YES : Message latch ON
NO : Message latch OFF
3.5.4.4 Press ” MENU” to exit and confirm current operation.
3.5.4.5 Press ” MENU” again to exit and close MESSAGE LATCH setup mode.