User manual

24
3.7.1.1 Press” Up ” “ Down ” “ Left ” or “ Right ” : Select a channel in the Channel setup
3.7.1.2 Press ENTER: Confirm the channel
3.7.1.3 Press “ Left ” or “ Right ” : Select the location of title (11 characters maximum)
3.7.1.4 Press ” Up ” or “ Down ” : Select the characters for display (0~9, A~Z,-, :, (, ), )
3.7.1.5 Press” Up ” “ Down ” “ Left ” or “ Right ” : Select channel in the Channel setup
3.7.1.6 Press “ENTER” Enter the channel setup
3.7.1.7 Press “ Up ” or “ Down ” : Select BRIGHTNESS/ CONTRAST/ COLOR on the screen
3.7.1.8 Press ” Up ” or “ Down ” : Set up 0~9 on the screen.
3.7.1.9 Press “MENU ” : Confirm and exit the brightness/contrast/color setting.
3.7.1.10 Press “MENU”: Exit the Channel setup
3.8 RECORD setup
Press ”MENU” to enter main menu. You will need to
enter password to access main menu. To press “ Left ”
or “ Right ” to move digit, and to press ” Up ” or “ Down
” to select number. To press ” ENTER ” button to
confirm password.
Ex.: PASSWORD: 0000 (Default: 0000)
PASSWORD: 0000
After keying the correct password, confirm by
pressing ”ENTER” button, screen will show
following options.
TIMER -------- Scheduling Record
CAMERA ------- Camera Channel Setup
RECORD------- Record Mode Setup
ALARM -------- Alarm Mode Setup
DWELL -------- Auto channel switching setup
REMOTE------- Remote control protocol Setup
SYSTEM ------- System Setup
EVENT -------- Event List
(MENU)
► TIMER
CAMERA
RECORD
ALARM
DWELL
REMOTE
SYSTEM
EVENT