User manual

27
Press “ ENTER ” to enter Alarm mode. Following screen
will be displayed.
(ALARM)
►ALARM ENABLE : YES
ALARM DURATION :10 SEC
RECORD IPS: 60
QUALITY : HIGH
RECORD MODE : FRAME
3.9.1 ALARM ENABLE setup:
3.9.1.1 Press ” Up ” or “ Down ” to choose ALARM ENABLE setup.
3.9.1.2 Press ” ENTER” to confirm ALARM ENABLE setup.
3.9.1.3 Press ” Up ” or “ Down ” to choose ALARM ENABLE.
YES－Alarm trigger will be available.
NO－Alarm trigger will be unavailable.
3.9.1.4 Press ” MENU ” to exit and confirm current operation.
3.9.1.5 Press ” MENU ” again to exit and close ALARM ENABLE setup mode.
3.9.2 ALARM DURATION setup
3.9.2.1 Press ” Up ” or “ Down ” to choose ALARM DURATION setup.
3.9.2.2 Press ” ENTER ” to confirm ALARM DURATION setup.
3.9.2.3 Press” Up ” or “ Down ” to choose ALARM DURATION time.
Always, 10sec, 15sec, 20sec, 30sec, 1min, 2min, 3min, 5min, 10min, 15min, 30min
3.9.2.4 Press ” MENU ” to exit and confirm current operation.
3.9.2.5 Press ” MENU ” again to exit and close ALARM DURATION setup mode.
3.9.3 RECORD IPS setup
3.9.3.1 Press ” Up ” or “ Down ” to choose RECORD IPS setup.
3.9.3.2 Press ” ENTER ” to confirm RECORD IPS setup.
3.9.3.3 Press ” Up ” or “ Down ” to choose RECORD IPS record speed.
NTSC－60、30、15、8、4、2、1
PAL－50、25、12、6、3、2、1
3.9.3.4 Press ” MENU ” to exit and confirm current operation.
3.9.3.5 Press again ” MENU ” to exit and close RECORD IPS setup mode.