User manual

29
Press ”Up” “Down” to choose DWELL setup
TIMER
CAMERA
RECORD
ALARM
►DWELL
REMOTE
SYSTEM
EVENT
(MENU)
TIMER
CAMERA
RECORD
ALARM
►DWELL
REMOTE
SYSTEM
EVENT
To choose DWELL item, and press “ ENTER ” to enter
Dwell mode. The following screen will be displayed.
(DWELL)
►DWELL TIME:01
CH1:YES
CH2:YES
CH3:YES
CH4:YES
QUAD:YES
3.10.1 DWELL TIME setup
This device allows user to set the DWELL TIME. DWELL TIME is the lasting time that
each channel sequentially shown on monitor.
3.10.1.1 Press ” Up ” or “ Down ” to choose DWELL TIME setup
3.10.1.2 Press ” ENTER ” to confirm DWELL TIME setup
3.10.1.3 Press ” Up ” or “ Down ” to choose DWELL TIME setup (From 01-10 SEC)
3.10.1.4 Press ” MENU ” to exit and confirm current operation.
3.10.1.5 Press ” MENU ” again to exit and close DWELL setup mode.
3.10.2 CH1 setup
3.10.2.1 Press ” Up ” or “ Down ” to choose CH1 setup.
3.10.2.2 Press ” ENTER ” to confirm
3.10.2.3 Press ” Up ” or “ Down ” to choose CH1 setup
YES- Channel 1 will be shown on the screen sequentially.
NO- Channel 1 will not be shown on the screen sequentially.
3.10.2.4 Press ” MENU ” to exit and confirm current operation.
3.10.2.5 Press ” MENU ” again to exit and close DWELL setup mode.
3.10.3 CH2 setup