User Manual

30
Digital Video Recorder User Manual
Step3: the setup steps of motion trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor alarm handling
for more details.
Fig 4-23 alarm configuration-motion
Step4: click Area button, a dialog box will pop-up as Fig 4-24:
Fig 4-24 motion-area
Step5: in the Area interface, user can drag slide bar to set the sensitivity value (1-8), the default value is 4. The higher the value is
the higher sensitivity you get. Due to the sensitivity is influenced by color and time (day or night), user can adjust its value
according to the practical conditions; click icon, set the whole area as detection area; click icon, the set detection area
will be cleared; click icon, user can test whether the sensitivity value and motion area are suitable accordingly（refer to
following picture）; Click icon, to save the setting; click icon, exit current interface.