User Manual

31
Digital Video Recorder User Manual
Note: when user drag mouse to set motion detection area, they have to click icon to clear all set detection area firstly,
and then make the operation.
Step6: user can setup all channels with same parameters.
Step7: click “default” button to resort default setting; click
“apply” button to save the setting; click “exit” button to exit
current interface.
② Schedule
Step1: enter into system configurationalarm
configurationschedule; refer to Fig 4-25:
Step2: the setup steps of alarm schedule are familiar with
schedule; user can refer to 4.4.1 Schedule for details.
Fig4-25 alarm configuration-schedule
4.5.3 Video loss
Step1: enter into system configurationalarm configurationvideo loss; refer to Fig 4-26:
Step2: the setup steps of video loss trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor alarm
handling for more details.
Step3: user can also setup all channels with same parameters.
Step4: click “apply” button to save the setting; click “exit” button to exit current interface.