User Manual

Digital Video Recorder User Manual

4.8 P.T.Z configuration

P.T.Z configuration includes two submenus: serial port and advance

① Serial port

Step 1: enter into system configuration  P.T.Z

configuration

serial port; refer to Fig 4-37:

Step 2: tick off Enable and then setup the value of address,

baud rate and protocol according to the settings of the

speed dome.

Step 3: user can setup all channels with same parameters.

Fig 4-37 P.T.Z configuration-serial port

Definitions and descriptions of network stream:

Parameter

Meaning

Address

The address of the PTZ device

Baud rate Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400,

4800, 9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600.

Protocol Communication protocol of the PTZ device. Range from: NULL, PELCOP,

PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA,

SAMSUNG, RM110, HY, N-control.

Simulative

Cruise

f enabled, no matter whether the PTZ device supports cruise or not, the

presets will cruise.