User Manual

Digital Video Recorder User Manual

after IP address or domain name.

Step 6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name

and password correctly, and enter to view.

Note: If you cannot download and install ActiveX, please refer to Appendix A FAQ Q8.

2. Connect the DVR to internet directly.

Step 1: Enter into the DVR’s Main MenuSetupNetwork interface to enable PPPoE and then input user name and

password received from your ISP. Next, click ‘Apply’. The DVR will connect to the server and would give a confirmation

message.

Step 2: When accessing the remote interface of DVR, user can input WAN IP to access directly (user can enter into Main

menuInformationNetwork interface to check IP address). The browser will download Active X control

Step 3: The following setting steps are as the same as Step4, Step 5 and Step 6 in Point 1.

Fig 7-1 View with IE browser