Operating Manual Ciclomaster Kabellos/Wireless Digital 2.
Table of contents Content Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Page 6. Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Functions in the upper display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.
A A-1 A-2 B Congratulations on your purchase! By purchasing the CICLOMASTER CM 8.3A you have acquired an electronic multifunctional sports computer with an integrated altimeter function, with the highest level of precision and newest digital transmission technology. The CM 8.3Ahas a state of-the-art electronics, is waterproof and convinces through his high durability.
2.1 Mounting of optional cadence-set Mount the handlebar unit as described above. Place the transmitter on the cable in front of the crank (don‘t fasten cable-ties yet). Mount the cadence-magnet on the crank (max. distance 3 mm). Important! The magnet must point directly towards the mark on the transmitter. Now switch CM 8.3A cadence measuring on and – if not done yet – initialize the transmitter (see chap.5). Turn the crank a few times to check if the mounting has been done correctly so that CM 8.
For a better reading in the following chapters the setting modes are fat printed and the settings fat and italic. Wheel/Radumf. Adjustment of circumference Default: 2080 mm Range: 0000-3999 mm Set with right and left button, store with left button. Here the circumference can be adjusted. SET ALT / SET HOEHE To define altimeter settings. To select, press the centre button. ALTITUDE / HOEHE To change current altitude.
CAD INISCAN To start this function, simultaneously press the left and right buttons briefly, jump setting with left button. To initialize the cadence transmitter (for first use or after battery/transmitter change): First, activate the cadence transmitter (by putting on the belt, chap. 2.2) then press the left and right buttons simultaneously. A percentage will be displayed in the upper display. If transmitter has been initialized successfully, the next setting option will be displayed.
Max HR / Max HF Shows the maximum heart rate, calculated with CICLOInZone®. Range: 0 to 240 bpm Adjust with right and left button, store with left button The CM 8.3A has a three-lined display. In the centre part always the current speed is shown, with a small 1 or 2 left beside, that shows whether the current values are valid for bike 1 or bike 2. To advance the functions of the upper display, press right button, to advance the functions of the lower display press left button.
19 625 TM SPD km/h SPD SPD T30 13 1 TM km/h SPD 6 14 1 km/h TM TM SPD km/hT31 1 km/h km/h km/h SPD 1 TM SPD 1 TM km/h 26ϒC km/h km/h km/h km/h TM SPD 1 TM SPD 1 6 km/h SPD 1 km/h D km/h km/h km/h km/h 2 -5ϒC km/h km/h km/h km/h km/h km/h 26ϒC 10ϒC TM SPD 1TM 1 713 1 TM km/h km/h km/h km/h -5ϒC TM SPD 1 SPD 1 26ϒC 10ϒC km/h 1 TM TM TM SPD 1 SPD km/h 350 km/h km/hTM km/h km/h 1 TM TM TM TM SPD SPD 1 1 SPD SPD TM 1 H18 SPD km/h SPD km/h km
11 12 M PD km/h TM PD SPD TM 8 SPD TM SPD 1 TM 1 9 km/h km/h km/h km/h PD 1 PD SPD km/h km/h 25 17 18 km/h 11 SPD SPD km/h km/h Ø - Average Heart Rate km/h km/h 1Subfunction ofkm/h 1 km/h “Heart Rate”. km/h 1Indicates the average heart1 rate (since lastkm/h km/h km/h reset). 12Range: 0 to 240 bpm 13 SPD SPD SPD SPD km/h TM TM SPD Subfunction of “Heart Rate”. km/h 1Indicates the maximum 1 heart rate reachedkm/h km/h km/h 1(since last reset).
No heart rate displayed or values displayed are incorrect or unstable - proof whether heart rate is switched on in setting mode - Check transmitter belt (battery) - Skin too dry or cold - Distance between CM 8.3A and transmitter belt is too big (max. 5m) - start manual transmitter search (press left button for 3 seconds) their training.
12. Technical Data CM 8.3A (receiver) Watersplash resistant Operating temperature: - 10°C to + 50°C Battery: CR 2032 Lithium Speed transmitter / optional cadence transmitter Reach: bis 2 m Operating temperature: -10°C to 50°C Transmission frequency: 2,4 GHz Battery: CR2032 Lithium Optional transmitter belt (heart rate transmitter) Reach: 5 m Operating temperature: 0°C to50°C Battery: CR2032 Lithium Transmission frequency: 2,4 GHz Guarantee certificate: Sender: Name First name treet, No.
