Inha lt 20140207 Wireless cycle computer using digital transmission (BlueEye III) including altimetry and PC-Analysis Manual | 1
Ge ne r al Infor mat ion s CM 9.3 A white/black Art.-No.: 10104800 Wireless cycle computer using digital transmission including altimetry and PC-Analysis (ANT+) D A CM 9.3 A + white/black Art.-No.
C ont e nts General Informations Page Page 2 3.6 Heart rate 10 1.1 The CM 9.3A (+) 4 3.6.1 Heart rate 10 1.2 Difference between the CM 9.3A and the CM 9.3A (+) 4 3.6.2 Fitness level 11 1.3 Included accessories 4 3.6.3 Sex 11 5 3.6.4 Weight 11 2.1 Overview 5 3.6.5 Birthday 2.2 Key operation in Normal “Bike mode” 5 2.3 Status icons 2.4 Display Control 2 Chapter (2) How to use the CM 9.3A (+) 11 ® 3.6.6 CICLOInZone 11 5 3.6.
C hap t e r 1 – Ge ne r al Infor mat ion 1.1 The CM 9.3A (+) 1.2 Difference between the CM 9.3 A and the CM 9.3 A (+) The CM 9.3 A and the CM 9.3 A (+) differ only in the included accessories. The CM 9.3 A (+) adds a cadence kit and heart rate belt to the delivery scope of the CM 9.3 A. These accessories can however be purchased separately to upgrade your CM 9.3 A. To activate the related functions go to Chapter 3. 1.
C h a p t e r 2 – how t o use your C M 9 .3 A (+) Here you will learn how to use the upper and lower display parts in bike mode. 2.1 Overview 2.2 Key operation in normal “Bike mode” 1 With the left button you can navigate through the main functions in the lower display. 2 With the middle button you can navigate through the sub functions in the lower display. 3 With the right button you can navigate through the upper display. 2.
C h a p t e r 2 – how t o use your C M 9 .3 A (+) 2.4.3 Menu navigation Settings in bold are main settings. The main menu can be browsed with the left and right button. Middle button enters the sub menu. Within the sub menus settings are changed with the middle and right button and stored/entered with the left button. SET ALT Altitude Home On/Off Home altitude Unit m/ft SET Bike 1/2 (Symbol RAD ½) * Day Dst. Power On/Off Poe Avg LR Pwr Off/On Tot. Dst.
C hap t e r 3 – se t t ings & fir st start In this chapter you will learn how to install and set up the CM 9.3 A (+) before the first ride. Please note that functions with this Symbol are only available with the (+) Version or with the optional accessories. 1 3.1 Mounting 3.1.1 Handlebar bracket You can mount the handlebar bracket on the handlebar or on the stem.
C hap t e r 3 – se t t ings & fir st start 3.2 Getting started 3.2.1 Batteries Insert the CR2032 battery with the positive side up. Place the O-ring, and close the battery cover with a coin. 3.2.2 Display Now you see the normal bike 1 display mode. If the display remains blank or weird values are shown, press the AC button on the back of the computer with a pointed object like a pen to reset the unit. 1 2 3 3.2.3 Menu Press the middle button 2 for 5 seconds to enter the menu.
C hap t e r 3 – se t t ings & fir st start 3.3.4 Bike weight Next you can adjust the weight of your bike in kilograms. This value is used for power calculation (see 3.3.7.) Set with the middle and right button, store with left button. 3.3.5 Unit Now you can set the unit used in the computer, km for kilometers or mi for miles. Set with the middle and right button, store with left button. 3.3.6 Cadence If you want to use the cadence, activate the cadence function.
C hap t e r 3 – se t t ings & fir st start 3.4 Time & Date 3.4.1 Time Press the left or the right button till Set Clock is displayed. Continue with the middle button. Set with the middle and right button, store with left button. 3.4.2 Time setting Now you can set if you want to have a 24 or an AM / PM time display. Set with the middle and right button, store with left button. 3.5 Altitude 3.5.1 Altitude If you do not know your current altitude, you can search the Internet for your location.
C hap t e r 3 – se t t ings & fir st start 3.6.2 Fitness level Level Fitness 1 Untrained 2 Little trained 3 Got in shape 4 Top form Now you can set your current fitness level according to the folloing table . (This is required for the automatic calculating of the personal heart rate limits by CICLOInZone ® ) Set with the middle and right button, store with left button 3.6.3 Sex Set your sex.
C hap t e r 3 – se t t ings & fir st start 3.6.9 MAX HR limit Please note: If you use CICLOInZone® you don’t need to change the Lower/Upper/Max HR. Here you can change the upper heart rate limit. Set with the middle and right button, store with left button. 3.7 Sensors You can connect different ANT+ sensors to the CM 9.3 A (+). To use an ANT+ sensor, you first have to initialize it. 3.7.
C hap t e r 3 – se t t ings & fir st start 3.8 PC-Connection To analyze the data recorded by the CM 9.3 A (+) you require the program “CicloAgent pro” which can be downloaded from our website “www.CicloSport.com/cm93a”. Download the file and start the installation process. Once you have installed the software, plug the USB dongle into a free USB port on your PC or Mac. Take the CM 9.3 A (+) and press the middle button until the menu appears.
C hap t e r 4 – Using t he C M 9 .3 A (+) 4.1 Main functions Bike Mode 1 left = change lower display main functions 2 middle = display Lower display sub functions 3 right = change Upper display functions Long press of the middle button = Menu 1+2 short press of the Left and right button = Bike 1 to Bike 2 to No Bike Mode 1+2 long press of the Left and right button = delete daily values and start recording 4.2 Bike mode 1 2 3 Mode Bike 1 Button Simultaneously press the left and right button.
C hap t e r 4 – Using t he C M 9 .3 A (+) 4.5 Initializing a sensor The CM 9.3A (+) is a digital computer using the ANT+ transmission system. Every new sensor hast to be initialized before use. Sensors will be stored until the battery is removed. The CM 9.3 A only supports ANT+ Sensors. Please refer to 3.7.1 for how to initialize sensors. If you have two bikes, you can connect designated sensors for each bike. However, only one heart rate sensor can be initialized. 4.
C hap t e r 5 – Se rvice 5.1 Service Do you have questions or a problem with the CM 9.3 A (+)? You can call your local distributor or you send us an email to: ciclo-service@ciclosport.de 5.2 Return the Unit If you’re CM 9.3 A (+) is sent in for repair (or battery change) or if a guarantee claim is not valid, repairs up to EUR 30. - will be carried out automatically. In case of higher repair costs you will be notified. The repaired device will be sent back COD.
C hap t e r 5 – Se rvice 5.4 Guarantee We offer a guarantee of 2 years from the date of purchase on the CM 9.3 A. The guarantee is limited to material and processing faults. Broken transmitters, or damages of wasted parts of CM 9.3 A are excluded from the guarantee. The guarantee is valid only if the computer, with accessories, has been handled and maintained carefully and according to operating instructions. The guarantee will take place through changes of or repairing the defective parts.
C hap t e r 5 – Se rvice 5.5 Guarantee certificate: Sender: Name: First Name: Street/No: Code/Location: E-Mail: Product name: Accessoires: Reason for return: After expiry of the guarantee: Repairs should be carried out up to a value of Euro _______________ Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems).
