Operating instructions

26 27
4.2 Setting alarm
Press and hold the Set button for 3
seconds when the display shows the
time and date.
“AL” will appear on the display, as
well as the time set for the alarm.
If the Mode button is pressed and
held for 3 seconds the hour will flash
on the display.
Press the Set button to change the value displayed and
store using the Mode button.
The minutes are then set.
Press the Set button to change the value displayed and
store using the Mode button.
Press the Set button, whilst in Alarm
mode, to switch the alarm on or off.
The alarm symbol will appear on the
display.
Store using the Mode button.
Press the Mode button to store the
displayed value. The hour will then
flash on the display.
Press the Set button to change the
value displayed and store using the
Mode button (the value displayed will “scroll” faster if the
Set button is pressed and held).
The minutes will then flash on the
display.
Press the Set button to change the
value displayed and store using the
Mode button.
The year will then flash on the
display.
Press the Set button to change the
value displayed and store using the
Mode button.
The month will then flash on the
display.
Press the Set button to change the
value displayed and store using the
Mode button.
The day of the week will then flash
on the display.
Press the Set button to change the
value displayed and store using the
Mode button.
The time and date setting is now complete.
02 CP13is englisch 22-39 31.08.2005 9:40 Uhr Seite 6