User's Manual

TROUBLESHOOTING
29
Static Interfer-
ence
(crackling sound
during call)
Do not place the base near appliances or large
metal objects.
Keep the handset away from interference sources
such as computers, remote control toys, wireless
alarm systems, wireless intercoms, room
monitors, fluorescent lights, and electrical
appliances.
Press CHANNEL to switch to another channel.
If the interference is severe, turn off the interfering
device.
Phone dials more
than 7 digits
when dialing a
local phone num-
ber from a Caller
ID record
Store the home area code (see Handset Settings
on page 14).
The handset’s
range decreases
Raise the base’s antenna to a vertical position.
Return the handset to the base to recharge the
battery pack.
Be sure the base’s antenna is not touching a metal
surface.
Receiver sound
flutters or fades
Be sure the battery pack is charged.
Move the handset closer to the base.
Can receive calls,
but cannot make
calls
Set Tone Dial/Pulse Dial correctly for the type of
service you have (see Handset Settings on page
14).
No Data Sent Check your service provider to ensure that you
have Caller ID or Call Waiting ID service.
Be sure that your answering machine is set to
answer after two rings.
Be sure you answer the call after two rings.
Check to see that Call Forwarding is turned off.
Check with your service provider to see if they are
experiencing problems.
P
ROBLEM SUGGESTION
CL915.book Page 29 Friday, May 4, 2001 11:35 AM