User's Manual

Storing Numbers

1. Be sure the BASE UNIT IN USE LED indicator is OFF and the HANDSET is in STANDBY

mode.

2. Press the

MEMO

button.

3. Dial the number you want to store.

4. Press the

MEMO

button again.

5. Dial the TELEPHONE KEYPAD

OPER

WXY

button where you want to store that number.

You will hear one confirmation “beep”.

6. Write the name of the person you will be calling with that number next to the corresponding

index number on the TELEPHONE NUMBER CARD.

7. Repeat steps 1 through 6 to store other telephone numbers.

EXAMPLE: To store the number 115-1968 under the TELEPHONE KEYPAD

button:

1 - Press the

MEMO

button. 4 - Press the TELEPHONE KEYPAD

button.

2 - Dial 115-1968. 5 - You have stored 115-1968 under the TELEPHONE

3 - Press the

MEMO

button again. KEYPAD

button.

A total of 10 telephone numbers can be programmed in memory.

IMPORTANT:

The maximum number of digits that can be stored for any phone number is 16 in PULSE or

TONE mode. The maximum number of digits for mixed (TONE and PULSE in combination) dialing

is 15. If you are using a switchboard system to access an outside line (such as an 8 or 9),

press the

PAUSE

button to store a PAUSE.

Storing Number