User's Manual

9
Wall Mounting
5. This cordless telephone has a HANDSET RETAINER TAB located on the BASE UNIT and a
RETAINER TAB NOTCH located on the back of the HANDSET to secure the HANDSET in the
CHARGE CRADLE when wall mounting.
1. Pull out the HANDSET RETAINER TAB using a finger tip or a small flat tool.
(See Figure 1)
2. Place the HANDSET in the CHARGE CRADLE with its TELEPHONE KEYPAD facing you.
(See Figure 2)
IMPORTANT: A “beep” will be heard when the HANDSET is properly positioned in the BASE
UNIT CHARGE CRADLE and charging. Securely positioning the HANDSET in
the BASE UNIT will also prevent the HANDSET from falling.
2.4
GHz
FIGURE 1
FIGURE 2
CHARGE
PAGE
IN USE
TALK
MEMOPAUSE
DEF
ABC
GHI
JKL
MNO
TUV
PRS WXY
OPER
TONE
1
2
3
6
5
4
7
8
9
0
#
IN USE
BATT LOW
FLASHREDIAL
SCAN
2.4
GHz